Technical Data sheet. Armstrong motors - 50Hz operation

Transcription

1 Technical Data sheet Armstrong - 50Hz operation File No: 48.11l Date: july 05, 2016 Supersedes: 48.11l Date: december 12, 2013

2 data sheet Commercial 2 standards conformance The conform to iec 60034, iec 60072, bs4999, bs5000 and bs3979 standards. The meet en 60034, en 55014, en ½, en , vde 0839 Teil 82-2, vde 0875 Teil 14 standards and carry ce mark for Europe. Motors are also offered to csa c22.2 no and ul 1004 for safety and carry csa/c-us mark, for Canada and U.S.A. The standard tefc, 50 Hz are with ie1/ ie2/ ie3 (high) level efficiencies as per commission regulations no. 640/2009 & no. 4/2014 for energy efficient. construction tefc squirrel cage with the following frame construction: Frames Aluminium pressure die cast (prefix sd) Frames Cast iron (prefix nd) *Armstrong refer to the Armstrong Factory Choice Motor specifications of standard products general operation: Voltage variation: or 415 ± 10% Frequency variation: 50 Hz ± 5% Frame dimensions: As per iec & iec Class of insulation: f Ambient temperature: 40 c Temperature rise: Max 80 c for insulation class 'B' by resistance method (unless otherwise stated) Altitude: Max 1000 meters Relative humidity: Up to 100% Atmospheric condition: Non corrosive and non hazardous atmosphere Rating/duty: Continuous/S1 Degree of protection: ip55 Vibration level: As per normal class of bs4999 Efficiency: Nameplate efficiency stated at full load Overload capacity: Capable of withstanding 60% overload for 15 sec Wye delta starting amps: Approx L of current when starting dol inverter operation: Max peak voltage at motor terminals Minimum inverter rise time Max cable length to motor Vpeak 1000 V (single amplitude - 0 to peak - line to line voltage) t r 0.2μs 30 meters derating factors The duration factors applicable under different conditions are given below: operating conditions: a: 415 V ± 6%, 50 Hz ± 3%. b: 415 V ± 10%, 50 Hz ± 5%.(maximum sum of voltage and frequency variation 10%) table a: Permissible output as % of standard output for different ambient temperatures. ambient temperature 40 c 45 c 50 c 55 c 60 c a 100.0% 93.3% 86.7% 80.0% 73.0% b 100.0% 92.0% 85.0% 78.0% 70.5%

3 Commercial data sheet 3 table b: Permissible output as % of standard output at different altitude. altitude above msl a 100% 98% 93% 87% 82% 78% 73% b 100% 95% 90% 84% 78% 75% 70% table c: Permissible output as % of standard output for different % of unbalance in voltage. % unbalance 1% 2% 3% 4% 5% 99% 92% 82% 65% 50% table d: Permissible output as % of standard output at different voltages. voltage 100% 90% 85% 80% 70% 40 c ambient 100.0% 100.0% 90.0% 85.0% 75.0% 45 c ambient 93.3% 85.0% 80.0% 75.0% 65.0% table e: Permissible output as % of standard output * for different duties. 60 min. s2 30min. 10 min. 60% cdf s3 40% cdf 25% cdf s4-s9 a 110% 120% 130% 110% 110% 130% Special design b 100% 115% 120% 100% 105% 120% required * Standard for the above permissible output will have starting and breakdown torque proportionately reduced as % of t, hence these will be suitable only for applications requiring low starting torque and are to be started dol(direct-on-line). note: When the motor is subjected to two or more variations in the above mentioned conditions, then all the appropriate factors are to be multiplied to arrive at the permissible output.

4 data sheet Commercial 4 performance data, 50hz output kw (hp) 0.55 (0.75) 0.75 (1.00) 1.10 (1.50) 1.50 (2.00) 2.20 (3.00) 3.00 (4.00) 4.00 (5.50) 5.50 (7.50) 7.50 (10.00) 11 (15) 15 (20) (25) 22 (30) 30 (40) pole frame size rpm 415v t Kg-m efficiency power factor dol stg. sound 50Hz ie1 ie2 ie3 ¾ load ½ stg.t stg.c pressure load %t %c levels** db(a) 2 sd sd sd sd sd90s On request 2* sd sd90s l On request 2 sd90s sd90l l On request 2 sd90l sd100l m On request 2 sd100l sd100l s On request 2 sd112m sd112m m On request 2 sd132s sd132s m On request 2 sd132s sd132m m On request 2 nd160m nd160m l On request 2 nd160m nd160l l On request 2 nd160l nd180m l On request 2 nd180m nd180l l On request 2 nd200l nd200l m On request note: All performance figures are subject to tolerances as per iec. - Full load, stg - Starting, c - Current, t - Torque, dol - Direct on line. * With class f temperature rise (90 c rise). ** The measured surface sound pressure level in db(a) is the mean value of the A-weighted sound pressure level measured in several places on a measured surface at a distance of one metre from the contour of the machine. ***For 6p, Sound Pressure Levels db(a) Available on Request.

5 Commercial data sheet 5 output kw (hp) pole frame size rpm 415v t Kg-m efficiency power factor dol stg. sound 50Hz ¾ ½ ie1 ie2 ie3 load load stg.t stg.c pressure %t %c levels** db(a) 37 (50) 45 (60) 55 (75) 75 (100) 90 (120) 110 (150) 132 (180) 150 (200) 160 (215) 180 (240) 200 (270) 225 (302) 250 (335) 275 (369) 315 (425) 355 (475) 2 nd200l nd225s m On request 2 nd225m nd225m s On request 2 nd250m nd250m m On request 2 nd280s nd280s s On request 2 nd280m nd280m m On request 2 nd315s nd315s m On request 2 nd315m nd315m l On request 2 nd315l nd315m nd315l nd315m l On request 2 nd315l nd315l l On request 2 nd315l nd315l nd355l nd355l nd355lx nd355l nd355lx nd355lx nd355lx nd355lx nd355lx nd355lx note: All performance figures are subject to tolerances as per iec. - Full load, stg - Starting, c - Current, t - Torque, dol - Direct on line. * With class f temperature rise (90 crise). ** The measured surface sound pressure level in db(a) is the mean value of the A-weighted sound pressure level measured in several places on a measured surface at a distance of one metre from the contour of the machine. ***For 6p, Sound Pressure Levels db(a) Available on Request.

6 data sheet Commercial 6 output kw (hp) pole frame size rpm 415v t Kg-m efficiency power factor dol stg. sound 50Hz ¾ ½ ie1 ie2 ie3 load load stg.t stg.c pressure %t %c levels** db(a) 400 (535) 450 (600) 500 (670) 560 (750) 630 (840) 710 (950) 800 (1080) 900 (1200) 2 nd355lx nd355lx nd355lx nd355lx l l l l l l l l l l l l note: All performance figures are subject to tolerances as per iec. - Full load, stg - Starting, c - Current, t - Torque, dol - Direct on line. * With class f temperature rise (90 crise). ** The measured surface sound pressure level in db(a) is the mean value of the A-weighted sound pressure level measured in several places on a measured surface at a distance of one metre from the contour of the machine. ***For 6p, Sound Pressure Levels db(a) Available on Request. toronto buffalo birmingham +44 (0) manchester +44 (0) bangalore +91 (0) shanghai são paulo armstrong uid technology established 1934 armstronguidtechnology.com