NEMA Premium. Efficiency Motors SIE series EISA Product Catalogue
|
|
|
- Sheila Preston
- 5 years ago
- Views:
Transcription
1 NEMA Premium Efficiency Motors IE series NEMA Premium EIA 2007 Product Catalogue
2 NEMA Premium Motors IE series ENERGY LEGILATION UMMARY The previous legislation affecting the energy efficiency of motors was the EPAct of In 2007, the EIA (Energy Independence and ecurity Act) legislation raised efficiency level of all products covered in the original bill to NEMA Premium levels. The NEMA Premium efficiency electric motors program refers to single-speed, polyphase,1-500 horsepower 2, 4, and 6 pole, NEMA Design A or B, continuous rated, squirrel cage induction motors. According to the mentioned above program, motors must meet or exceed the nominal energy efficiency levels. These requirements are obligatory in the U from 19th December of Cantoni Motor has introduced a new low voltage NEMA motors IE series that was developed to increase motors performance (to comply with the NEMA PREMIUM requirements). CA Certificate of Energy Efficiency Verification Motors meet CA-C22.2 No and UL standards - Certificate of Compliance PREMIUM HIGH EFFICIENCY MOTOR HP Built big and tough, Cantoni Motor High Efficiency motors are designed to withstand the most extreme, severe-duty applications. Features: Motors meet or exceed NEMA Premium Efficiency requirements Inverter Duty : 10:1CT & 20:1VT ervice Factor: up to 1.4 Design: A or B Degree of Protection: IP55 Enclosure: TEFC High Locked Rotor Torque /460V 60Hz (up to & including 100HP) Additionally rated for 380V 50Hz Oversized Ball Bearings on both ends for direct coupling Class F Insulation with temperature rise of the winding below Class B VPI Process applied for best electrical performance Rigid Cast Iron Frame Designed for Horizontal & Vertical application Low vibration level (below 2.2 mm/sec) F1 Mount CA-U Certified, CE Marked and DOE Approved 02
3 NEMA Premium Motors IE series Item Type power speed torque Efficiency [%] Power factor Current Amps at 460V Current Amps at 575V Locked rotor torque ratio Breakdown torque ratio NEMA Code Letter Wk 2 ervice factor Net Weight HP rpm Lbft 50% 75% 100% 50% 75% 100% Full Locked rotor Full Locked rotor % % - Lb-Ft 2 - Lbs 1 IE 143T2 1, ,2 79,8 83,2 84,0 0,57 0,69 0,78 2,1 20,0 1,7 16, M 0,07 1, IE 145T ,0 83,3 85,7 85,5 0,62 0,75 0,82 2,7 25,4 2,2 20, L 0,08 1, IE 182T ,5 84,4 86,4 86,5 0,65 0,76 0,82 4,0 32,0 3,2 25, K 0,12 1, IE 184T ,4 86,7 88,6 88,5 0,68 0,80 0,85 6,2 73,0 5,0 58, N 0,2 1, IE 213T2 7, ,2 88,7 90,0 89,5 0,81 0,89 0,92 8,5 76,0 6,8 60, K 0,45 1, IE 215T ,8 89,3 90,4 90,2 0,80 0,88 0,91 11,4 93,0 9,1 74, J 0,5 1, IE 254T ,3 90,5 91,8 91,7 0,77 0,85 0,87 17, ,1 90, G 1,15 1, IE 256T ,7 91,7 92,4 91,7 0,82 0,88 0,89 22, , F 1,47 1, IE 284T ,9 91,3 92,4 92,4 0,74 0,82 0,86 29, , H 1,72 1, IE 286T ,5 91,2 92,0 91,7 0,80 0,85 0,87 35, , G 1,92 1, IE 324T ,7 93,0 92,4 0,88 0,91 0,92 44, , G 4,0 1, IE 326T ,5 93,7 93,0 0,89 0,92 0,92 55, , G 4,7 1, IE 364T ,5 93,8 94,1 93,6 0,87 0,91 0,92 65, , G 6,5 1, IE 365T ,2 94,3 93,6 0,89 0,91 0,92 82, , G 7,9 1, IE 405T ,3 95,6 95,4 0,83 0,88 0, , G 10,0 1, IE 444T ,1 95,3 95,0 0,86 0,90 0, G 22,5 1, IE 445T ,2 95,3 95,0 0,86 0,91 0, G 28,4 1, IE 447T2A ,8 95,8 95,4 0,88 0,92 0, G 29,1 1, IE 447T2B ,1 96,2 95,8 0,89 0,92 0, G 36,9 1, IE 143T ,3 84,5 85,5 0,57 0,70 0,78 1,4 12,9 1,1 10, M 0,09 1, IE 145T4 1, ,5 85,0 86,8 86,5 0,59 0,72 0,79 2,1 16,6 1,6 13, K 0,1 1, IE 145T ,8 87,1 86,5 0,64 0,77 0,83 2,6 19,2 2,1 15, J 0,13 1, IE 182T ,9 85,8 88,5 89,5 0,54 0,67 0,75 4,2 38,0 3,4 30, M 0,27 1, IE 184T ,8 87,6 89,2 89,5 0,58 0,71 0,78 6,7 61,0 5,4 48, L 0,34 1, IE 213T4 7, ,3 90,5 91,6 91,7 0,67 0,78 0,82 9,3 71,0 7,4 56, J 0,87 1, IE 215T ,6 90,4 91,7 91,7 0,66 0,77 0,82 12,5 87,0 10,0 69, H 0,99 1, IE 254T ,3 90,7 92,0 92,4 0,76 0,84 0,88 17, ,8 134, K 2,89 1, IE 256T ,1 91,4 92,7 93,0 0,76 0,84 0,88 22, , L 3,57 1, IE 284T ,7 91,6 93,1 93,6 0,66 0,76 0,82 30, , L 3,59 1, IE 286T ,4 91,3 93,0 93,6 0,61 0,73 0,80 37, , L 3,84 1, IE 324T ,3 94,7 94,1 0,78 0,86 0,88 45, , G 9,3 1, IE 326T ,9 95,1 94,5 0,78 0,85 0,88 56, , G 11,6 1, IE 364T ,3 95,6 95,0 0,80 0,87 0,88 67, , G 15,5 1, IE 365T ,5 95,8 95,4 0,80 0,86 0,88 84, , G 17,8 1, IE 405T ,7 95,9 95,4 0,84 0,89 0, , G 29,8 1, IE 444T ,7 95,8 95,4 0,85 0,89 0, G 42,9 1, IE 445T ,1 96,2 95,8 0,86 0,90 0, G 52,7 1, IE 447T4A ,2 96,7 96,5 0,81 0,87 0, G 68,0 1, IE 447T4B ,5 96,6 96,2 0,85 0,90 0, G 81,5 1, TECHNICAL DATA 03
4 NEMA Premium Motors IE series Item Type power speed torque Efficiency [%] Power factor Current Amps at 460V Current Amps at 575V Locked rotor torque ratio Breakdown torque ratio NEMA Code Letter Wk 2 TECHNICAL DATA ervice factor Net Weight HP rpm Lbft 50% 75% 100% 50% 75% 100% Full Locked rotor Full Locked rotor % % - Lb-Ft 2-40 IE 145T ,5 78,6 81,9 82,5 0,46 0,59 0,68 1,7 10,0 1,4 8, K 0,15 1, IE 182T6 1, ,7 84,5 86,9 87,5 0,47 0,59 0,68 2,4 14,0 1,9 11, J 0,4 1, IE 184T ,0 86,9 88,6 88,5 0,51 0,64 0,72 3,0 25,0 2,4 20, L 0,45 1, IE 213T ,5 88,0 89,5 89,5 0,56 0,68 0,74 4,2 32,0 3,4 25, K 1,45 1, IE 215T ,4 88,2 89,6 89,5 0,57 0,69 0,75 7,0 46,0 5,6 36, J 1,56 1, IE 254T6 7, ,2 88,6 90,6 91,0 0,54 0,67 0,74 10,4 77,5 8,3 62, K 2,63 1, IE 256T ,5 89,2 90,8 91,0 0,58 0,70 0,77 13,4 94,0 10,7 75, J 3,31 1, IE 284T ,4 89,0 91,2 91,7 0,61 0,73 0,79 19, , L 5,19 1, IE 286T ,5 89,1 91,1 91,7 0,63 0,74 0,80 25, , L 6,03 1, IE 324T ,4 93,3 93,0 0,65 0,75 0,80 31, G 12,9 1, IE 326T ,6 93,3 93,0 0,69 0,78 0,82 37, G 14,7 1, IE 364T ,5 94,2 94,1 0,68 0,78 0,82 48, G 23,1 1, IE 365T ,7 94,3 94,1 0,71 0,80 0,83 60, G 25,9 1, IE 404T ,7 94,4 94,5 0,68 0,78 0,82 72, G 36,8 1, IE 405T ,4 94,9 94,5 0,70 0,79 0,82 91, G 41,9 1, IE 444T ,9 94,9 95,0 0,65 0,75 0, G 64,1 1, IE 445T ,3 95,6 95,4 0,67 0,77 0, G 76,3 1, Lbs As part of our development program the technical specifications indicated may change, and we reserve the right to alert or to amend any of this specifications without giving prior notice. Anycase you will find eventual changement o our web-site: 04
5 NEMA Premium Motors IE series RIGID BAE C AB P 2F B BA Motor Mounting Dimensions (inches) Overall Dimensions (inches) Type haft End D 2E 2F G H BA E N-W R U A AA AB B C J O P IE 143T 3,50 5,50 4,00 0,39 0,34 2,25 1,52 2,25 0,771 0,188 0,875 6,62 3/4 6,5 5,83 14,2 1,66 7,48 8,27 IE 145T 3,50 5,50 5,00 0,39 0,34 2,25 1,52 2,25 0,771 0,188 0,875 6,62 3/4 6,5 7,00 15,15 1,66 7,48 8,27 IE 182T 4,5 7,5 4,5 0,6 0,41 2,75 1,94 2,75 0,986 0,25 1, ,9 8,31 17,7 2,13 9,09 9,53 IE 184T 4,5 7,5 5,5 0,6 0,41 2,75 1,94 2,75 0,986 0,25 1, ,9 8,31 17,7 2,13 9,09 9,53 IE 213T 5,25 8,5 5,5 0,67 0,41 3,5 2,55 3,38 1,201 0,312 1,375 10,24 1 8,92 8,7 22,25 2,2 10,96 11,61 IE 215T 5,25 8,5 7 0,67 0,41 3,5 2,55 3,38 1,201 0,312 1,375 10,24 1 8,92 10,28 22,88 2,2 10,96 11,61 IE 254T 6, ,25 0,58 0,55 4,25 3,11 4 1,416 0,375 1,625 12,28 1,25 10,08 9,92 25,83 2,36 13,18 14,17 IE 256T 6, ,58 0,55 4,25 3,11 4 1,416 0,375 1,625 12,28 1,25 10,08 11,65 27,6 2,36 13,18 14,17 IE 284T ,5 0,89 0,55 4,75 3,53 4,62 1,591 0,5 1,875 13,78 1,5 10,34 13,11 31,16 2,75 14,01 14,17 IE 284T ,5 0,89 0,55 4,75 2,1 3,25 1,416 0,375 1,625 13,78 1,5 10,34 13,11 27,2 2,75 14,01 14,17 IE 286T ,89 0,55 4,75 3,53 4,62 1,591 0,5 1,875 13,78 1,5 10,34 13,11 31,16 2,75 14,01 14,17 IE 286T ,89 0,55 4,75 2,1 3,25 1,416 0,375 1,625 13,78 1,5 10,34 13,11 27,2 2,75 14,01 14,17 E NW R U AA Tapped H 2E A J G D O OVERALL AND MOUNTING DIMENION 05
6 NEMA Premium Motors IE series RIGID BAE C AB T P E R OVERALL AND MOUNTING DIMENION O K2 2F1 2F2 B K1 BA N-W A A Tapped Motor Mounting Dimensions (inches) Overall Dimensions (inches) Type haft End D 2E 2F1 2F2 G H BA E N-W R U A AA AB B C J K1 K2 O P T IE 324T2 (2) 8 12,5 10,5 12 1,38 0,66 5,25 2,75 3,75 1,591 0,5 1,875 15, ,6 3,15 4,45 4,45 16,9 17,9 2,5 IE 324T (4-6) 8 12,5 10,5 12 1,38 0,66 5,25 4,33 5,25 1,845 0,5 2,125 15, ,1 3,15 4,45 4,45 16,9 17,9 2,5 IE 326T2 (2) 8 12,5 10,5 12 1,38 0,66 5,25 2,75 3,75 1,591 0,5 1,875 15, ,6 3,15 4,45 4,45 16,9 17,9 2,5 IE 326T (4-6) 8 12,5 10,5 12 1,38 0,66 5,25 4,33 5,25 1,845 0,5 2,125 15, ,1 3,15 4,45 4,45 16,9 17,9 2,5 IE 364T2 (2) ,25 12,25 1,49 0,66 5,88 2,75 3,75 1,591 0,5 1,875 17,5 3 14, ,6 3,35 4,53 4,53 18,8 19,9 2,5 IE 364T (4-6) ,25 12,25 1,49 0,66 5,88 4,92 5,88 2,021 0,625 2,375 17,5 3 14, ,7 3,35 4,53 4,53 18,8 19,9 2,5 IE 365T2 (2) ,25 12,25 1,49 0,66 5,88 2,75 3,75 1,591 0,5 1,875 17,5 3 14, ,6 3,35 4,53 4,53 18,8 19,9 2,5 IE 365T (4-6) ,25 12,25 1,49 0,66 5,88 4,92 5,88 2,021 0,625 2,375 17,5 3 14, ,7 3,35 4,53 4,53 18,8 19,9 2,5 IE 404T (6) ,25 13,75 1,57 0,81 6,62 6,3 7,25 2,45 0,75 2,875 18,9 3 15,5 17,6 40,4 3,54 5,32 5,32 20,8 21,3 2,95 IE 405T2 (2) ,25 13,75 1,57 0,81 6,62 3,5 4,25 1,845 0,5 2,125 18,9 3 15,5 17,6 37,4 3,54 5,32 5,32 20,8 21,3 2,95 IE 405T (4-6) ,25 13,75 1,57 0,81 6,62 6,3 7,25 2,45 0,75 2,875 18,9 3 15,5 17,6 40,4 3,54 5,32 5,32 20,8 21,3 2,95 IE 444T2 (2) ,5 16,5 1,57 0,81 7,5 4,3 4,75 2,021 0,625 2,375 21,7 2x3 17,6 20,5 42 4,15 5,12 6,5 23,4 24,4 3,75 IE 444T (4-6) ,5 16,5 1,57 0,81 7,5 7,9 8,5 2,88 0,875 3,375 21,7 2x3 17,6 20,5 45,7 4,15 5,12 6,5 23,4 24,4 3,75 IE 445T2 (2) ,5 16,5 1,57 0,81 7,5 4,3 4,75 2,021 0,625 2,375 21,7 2x3 17,6 20,5 42 4,15 5,12 6,5 23,4 24,4 3,75 IE 445T (4-6) ,5 16,5 1,57 0,81 7,5 7,9 8,5 2,88 0,875 3,375 21,7 2x3 17,6 20,5 45,7 4,15 5,12 6,5 23,4 24,4 3,75 IE 447T2 (2) ,654 0,81 7,5 4,3 4,75 2,021 0,625 2,375 22,1 2x3 19, ,3 4,18 6,8 6,8 23,4 24,4 3,75 IE 447T4A (4) ,654 0,81 7,5 7,9 8,5 2,88 0,875 3,375 22,1 2x3 19, ,18 6,8 6,8 23,4 24,4 3,75 IE 447T4B (4) ,654 0,81 7,5 7,9 8,5 2,88 0,875 3,375 22,1 2x3 19, ,5 4,18 7,95 5,63 23,4 24,4 3,75 U J 2E A H G D 06
7 NEMA Premium Motors IE series C-FACE WITH RIGID BAE C AB BB AH P E AJ AK BD O 2F B BA N-W R U AA Tapped Mounting Dimensions (inches) Overall Dimensions(inches) Motor haft End C-face Type D 2E 2F G H BA E N-W R U AH AJ AK BB BF A AA AB B BD C J O P IE 143TC 3,50 5,50 4,00 0,39 0,34 2,25 1,52 2,25 0,771 0,188 0,875 2,12 5,88 4,5 0,16 3/8-16 6,62 3/4 6,50 5,83 6,50 14,20 1,66 7,48 8,27 IE 145TC 3,50 5,50 5,00 0,39 0,34 2,25 1,52 2,25 0,771 0,188 0,875 2,12 5,88 4,5 0,16 3/8-16 6,62 3/4 6,50 7,00 6,50 15,15 1,66 7,48 8,27 IE 182TC 4,50 7,50 4,50 0,60 0,41 2,75 1,94 2,75 0,986 0,250 1,125 2,62 7,25 8,5 0,25 1/2-13 9,00 1 7,90 8,31 8,90 17,70 2,13 9,09 9,53 IE 184TC 4,50 7,50 5,50 0,60 0,41 2,75 1,94 2,75 0,986 0,250 1,125 2,62 7,25 8,5 0,25 1/2-13 9,00 1 7,90 8,31 8,90 17,70 2,13 9,09 9,53 IE 213TC 5,25 8,50 5,50 0,67 0,41 3,50 2,55 3,38 1,201 0,312 1,375 3,13 7,25 8,5 0,25 1/ ,24 1 8,92 8,70 8,90 22,25 2,20 10,96 11,61 IE 215TC 5,25 8,50 7,00 0,67 0,41 3,50 2,55 3,38 1,201 0,312 1,375 3,13 7,25 8,5 0,25 1/ ,24 1 8,92 10,28 8,90 22,88 2,20 10,96 11,61 IE 254TC 6,25 10,00 8,25 0,58 0,55 4,25 3,11 4,00 1,416 0,375 1,625 3,75 7,25 8,5 0,25 1/ ,28 1 1/4 10,08 9,92 10,00 25,83 2,36 13,18 14,17 IE 256TC 6,25 10,00 10,00 0,58 0,55 4,25 3,11 4,00 1,416 0,375 1,625 3,75 7,25 8,5 0,25 1/ ,28 1 1/4 10,08 11,65 10,00 27,60 2,36 13,18 14,17 IE 284TC 7,00 11,00 9,50 0,89 0,55 4,75 3,53 4,62 1,591 0,500 1,875 4,38 9,00 10,5 0,25 1/ ,78 1 1/2 10,34 13,11 11,25 31,16 2,75 14,01 14,17 IE 284TC 7,00 11,00 9,50 0,89 0,55 4,75 2,10 3,25 1,416 0,375 1,625 3,00 9,00 10,5 0,25 1/ ,78 1 1/2 10,34 13,11 11,25 27,20 2,75 14,01 14,17 IE 286TC 7,00 11,00 11,00 0,89 0,55 4,75 3,53 4,62 1,591 0,500 1,875 4,38 9,00 10,5 0,25 1/ ,78 1 1/2 10,34 13,11 11,25 31,16 2,75 14,01 14,17 IE 286TC 7,00 11,00 11,00 0,89 0,55 4,75 2,10 3,25 1,416 0,375 1,625 3,00 9,00 10,5 0,25 1/ ,78 1 1/2 10,34 13,11 11,25 27,20 2,75 14,01 14,17 H BF 2E A J G D OVERALL AND MOUNTING DIMENION 07
8 NEMA Premium Motors IE series C-FACE WITH RIGID BAE C AB 45 T BB AH AJ P E BF OVERALL AND MOUNTING DIMENION K2 2F1 2F2 B K1 BA BC N-W AK AA Tapped Mounting Dimensions (inches) Overall Dimensions (inches) Motor haft End C-face Type D 2E 2F1 2F2 G H BA E N-W R U AH AJ AK BB/ BF A AA AB B BD C J K1 K2 O P T BC size No. IE 324T2CL (2) 8 12,5 10,50 12,00 1,38 0,66 5,25 2,75 3,75 1,591 0,5 1,875 3, ,5 0,25 5/ , ,6 3,15 4,45 4,45 16,9 17,9 2,5 IE 324TCL (4-6) 8 12,5 10,50 12,00 1,38 0,66 5,25 4,33 5,25 1,845 0,5 2,125 5, ,5 0,25 5/ , ,1 3,15 4,45 4,45 16,9 17,9 2,5 IE 326T2CL (2) 8 12,5 10,50 12,00 1,38 0,66 5,25 2,75 3,75 1,591 0,5 1,875 3, ,5 0,25 5/ , ,6 3,15 4,45 4,45 16,9 17,9 2,5 IE 326TCL (4-6) 8 12,5 10,50 12,00 1,38 0,66 5,25 4,33 5,25 1,845 0,5 2,125 5, ,5 0,25 5/ , ,1 3,15 4,45 4,45 16,9 17,9 2,5 IE 364T2CL (2) ,25 12,25 1,49 0,66 5,88 2,75 3,75 1,591 0,5 1,875 3, ,5 0,25 5/ ,5 3 14, ,2 33,6 3,35 4,53 4,53 18,8 19,9 2,5 IE 364TCL (4-6) ,25 12,25 1,49 0,66 5,88 4,92 5,88 2,021 0,625 2,375 5, ,5 0,25 5/ ,5 3 14, ,2 35,7 3,35 4,53 4,53 18,8 19,9 2,5 IE 365T2CL (2) ,25 12,25 1,49 0,66 5,88 2,75 3,75 1,591 0,5 1,875 3, ,5 0,25 5/ ,5 3 14, ,2 33,6 3,35 4,53 4,53 18,8 19,9 2,5 IE 365TCL (4-6) ,25 12,25 1,49 0,66 5,88 4,92 5,88 2,021 0,625 2,375 5, ,5 0,25 5/ ,5 3 14, ,2 35,7 3,35 4,53 4,53 18,8 19,9 2,5 IE 404TCL (6) ,25 13,75 1,57 0,81 6,62 6,30 7,25 2,450 0,75 2,875 7, ,5 0,25 5/ ,9 3 15,5 17,6 13,2 40,4 3,55 5,32 5,32 20,8 21,3 2,95 IE 405T2CL (2) ,25 13,75 1,57 0,81 6,62 3,50 4,25 1,845 0,5 2,125 4, ,5 0,25 5/ ,9 3 15,5 17,6 13,2 37,4 3,55 5,32 5,32 20,8 21,3 2,95 IE 405TCL (4-6) ,25 13,75 1,57 0,81 6,62 6,30 7,25 2,450 0,75 2,875 7, ,5 0,25 5/ ,9 3 15,5 17,6 13,2 40,4 3,55 5,32 5,32 20,8 21,3 2,95 IE 444T2CL (2) ,50 16,50 1,57 0,81 7,5 4,30 4,75 2,021 0,625 2,375 4, ,25 5/ ,7 2x3 17,6 20,5 16,6 42,0 4,15 5,12 6,5 23,4 24,4 3,75 IE 444TCL (4-6) ,50 16,50 1,57 0,81 7,5 7,90 8,50 2,880 0,875 3,375 8, ,25 5/ ,7 2x3 17,6 20,5 16,6 45,7 4,15 5,12 6,5 23,4 24,4 3,75 IE 445T2CL (2) ,50 16,50 1,57 0,81 7,5 4,30 4,75 2,021 0,625 2,375 4, ,25 5/ ,7 2x3 17,6 20,5 16,6 42,0 4,15 5,12 6,5 23,4 24,4 3,75 IE 445TCL (4-6) ,50 16,50 1,57 0,81 7,5 7,90 8,50 2,880 0,875 3,375 8, ,25 5/ ,7 2x3 17,6 20,5 16,6 45,7 4,15 5,12 6,5 23,4 24,4 3,75 IE 447T2CL (2) ,00-1,654 0,81 7,5 4,30 4,75 2,021 0,625 2,375 4, ,25 5/ ,1 2x3 19, ,6 46,3 4,18 6,8 6,8 23,4 24,4 3,75 IE 447TCL4A (4) ,00-1,654 0,81 7,5 7,90 8,50 2,880 0,875 3,375 8, ,25 5/ ,1 2x3 19, ,6 50,0 4,18 6,8 6,8 23,4 24,4 3,75 IE 447TCL4B (4) ,00-1,654 0,81 7,5 7,90 8,50 2,880 0,875 3,375 8, ,25 5/ ,1 2x3 19, ,6 53,5 4,18 6,8 6,8 23,4 24,4 3,75 BD R U J 2E A H G D O 08
9 NEMA Premium Motors IE series D-FACE WITH RIGID BAE C BB AH AB T 45 E BC P AJ O K2 2F1 2F2 B K1 BA N-W AK BD A A Tapped Mounting Dimensions(inches) Overall Dimensions(inches) Motor haft End D-face BC=0 Type D 2E 2F1 2F2 G H BA E N-W R U AH AJ AK BB BF A AA AB B BD C J K1 K2 O P T size No. IE 324T2DL (2) 8 12,5 10,5 12 1,38 0,66 5,25 2,75 3,75 1,591 0,5 1,875 3, ,25 0, , ,8 31,6 3,15 4,45 4,45 16,9 17,9 2,50 IE 324TDL (4-6) 8 12,5 10,5 12 1,38 0,66 5,25 4,33 5,25 1,845 0,5 2,125 5, ,25 0, , ,8 33,1 3,15 4,45 4,45 16,9 17,9 2,50 IE 326T2DL (2) 8 12,5 10,5 12 1,38 0,66 5,25 2,75 3,75 1,591 0,5 1,875 3, ,25 0, , ,8 31,6 3,15 4,45 4,45 16,9 17,9 2,50 IE 326TDL (4-6) 8 12,5 10,5 12 1,38 0,66 5,25 4,33 5,25 1,845 0,5 2,125 5, ,25 0, , ,8 33,1 3,15 4,45 4,45 16,9 17,9 2,50 IE 364T2DL (2) ,25 12,25 1,49 0,66 5,88 2,75 3,75 1,591 0,5 1,875 3, ,25 0, ,5 3 14, ,8 33,6 3,35 4,53 4,53 18,8 19,9 2,50 IE 364TDL (4-6) ,25 12,25 1,49 0,66 5,88 4,92 5,88 2,021 0,625 2,375 5, ,25 0, ,5 3 14, ,8 35,7 3,35 4,53 4,53 18,8 19,9 2,50 IE 365T2DL (2) ,25 12,25 1,49 0,66 5,88 2,75 3,75 1,591 0,5 1,875 3, ,25 0, ,5 3 14, ,8 33,6 3,35 4,53 4,53 18,8 19,9 2,50 IE 365TDL (4-6) ,25 12,25 1,49 0,66 5,88 4,92 5,88 2,021 0,625 2,375 5, ,25 0, ,5 3 14, ,8 35,7 3,35 4,53 4,53 18,8 19,9 2,50 IE 404TDL (6) ,25 13,75 1,57 0,81 6,62 6,30 7,25 2,45 0,75 2,875 7, ,25 0, ,9 3 15,5 17,6 21,7 40,4 3,55 5,32 5,32 20,8 21,3 2,95 IE 405T2DL (2) ,25 13,75 1,57 0,81 6,62 3,50 4,25 1,845 0,5 2,125 4, ,25 0, ,9 3 15,5 17,6 21,7 37,4 3,55 5,32 5,32 20,8 21,3 2,95 IE 405TDL (4-6) ,25 13,75 1,57 0,81 6,62 6,30 7,25 2,45 0,75 2,875 7, ,25 0, ,9 3 15,5 17,6 21,7 40,4 3,55 5,32 5,32 20,8 21,3 2,95 IE 444T2DL (2) ,5 16,5 1,57 0,81 7,50 4,30 4,75 2,021 0,625 2,375 4, ,25 0, ,7 2x3 17,6 20,5 21,7 42 4,15 5,12 6,5 23,4 24,4 3,75 IE 444TDL (4-6) ,5 16,5 1,57 0,81 7,50 7,90 8,50 2,88 0,875 3,375 8, ,25 0, ,7 2x3 17,6 20,5 21,7 45,7 4,15 5,12 6,5 23,4 24,4 3,75 IE 445T2DL (2) ,5 16,5 1,57 0,81 7,50 4,30 4,75 2,021 0,625 2,375 4, ,25 0, ,7 2x3 17,6 20,5 21,7 42 4,15 5,12 6,5 23,4 24,4 3,75 IE 445TDL (4-6) ,5 16,5 1,57 0,81 7,50 7,90 8,50 2,88 0,875 3,375 8, ,25 0, ,7 2x3 17,6 20,5 21,7 45,7 4,15 5,12 6,5 23,4 24,4 3,75 IE 447T2DL (2) ,654 0,81 7,50 4,30 4,75 2,021 0,625 2,375 4, ,25 0, ,1 2x3 19, ,7 46,3 4,18 6,8 6,8 23,4 24,4 3,75 IE 447TDL4A (4) ,654 0,81 7,50 7,90 8,50 2,88 0,875 3,375 8, ,25 0, ,1 2x3 19, ,7 50 4,18 6,8 6,8 23,4 24,4 3,75 IE 447TDL4B (4) ,654 0,81 7,50 7,90 8,50 2,88 0,875 3,375 8, ,25 0, ,1 2x3 19, ,7 53,5 4,18 6,8 6,8 23,4 24,4 3,75 R U J BF 2E A H G D OVERALL AND MOUNTING DIMENION 09
10 NEMA Premium Motors IE series notes 10
11 NEMA Premium Motors IE series notes 11
12 TD211a 01/IE_NEMA-V1
NEMA Premium Efficiency Motors SIE series
NEMA Premium Efficiency Motors IE series NEMA Premium 2015 Product Catalogue MOTEUR 'PREMIUM EFFICIENCY' CERTIFIÉ ET VERIFIÉ CA (UA) BATI EN FONTE ERVICE FACTOR JUQU'À 1.40 IOLATION DE CLAE F (155 C),
Our brand names are known as both Cantoni Motor (CC045A) and Elektrim (CC025A).
This catalogue covers general purpose industrial motors, And crusher duty motors produced by antoni Group. Our brand names are known as both antoni Motor (045A) and Elektrim (025A). antoni Group manufactures
JRP Motors 1 and 3 Phases TEFC 56C Stainless and Rolled Steel Motors
JRP Motors and 3 Phases TEFC 56C Stainless and Rolled Steel Motors /3-3 HP PH & 3PH TEFC 60 Hz AC Foot Mounted and Round Body C-Face Motors Features Inverter Duty Rated: 3:CT & 5:VT (3-Phase only) Service
General Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
W22 NEMA Brake Motors - NEMA Premium
101 www.pamensky.com TEFC Standard Features Motors are compliant with DOE and NRCAN Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 208-230/460V, 575V Brake power supply: 220/230/240/460/575V Totally Enclosed
1/3-3 HP 1PH & 3PH TEFC 60 Hz NEMA AC Foot Mounted and Round Body C-Face Motors
/3-3 HP PH & 3PH TEF 60 Hz NEMA A Foot Mounted and Round Body -Face Motors Features Inverter Duty Rated: 3:T & 5:VT (3-Phase only) Service Factor:.5 Design: B Protection Degree: IP55 Enclosure: TEF F mount
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY TYPE AEHE, AEHH8N, AEHH8NCF, AEUH8NDC Effective 05-01-13 Supercedes 08-01-11 APPLICATIONS: Fans & Blowers Compressor Any Severe Duty/ Petro-Chem/ Pumps Mixers Pulp
Powerful + Efficient + Reliable
1 THRU 50HP NEMA 140T THRU 449T HIGH EFFICIENCY ISO9001 CERTIFIED Powerful + Efficient + Reliable TEFC CAST IRON FRAMES CLASS F INSULATED 1.15 SERVICE FACTOR OVER SIZED BEARINGS LOW-LOSS ELECTRICAL GRADE
Quick and Easy Voltage Flexibility for NEMA and Metric IEC Motors Motors are re-rated from stock models to 575V in as little as (1) business day
Elektrim 7V s Quick and Easy Voltage Flexibility for NEMA and Metric IEC s s are re-rated from stock models to 7V in as little as () business day Available 7V s: -0 HP NEMA Premium Performance Series s
Electric Motors
SELECT Electric Motors To compete in today s global marketplace, you need a supplier who can provide electric motors that meet your quality, cost, and delivery requirements. That is why you rely on IDC
5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA MG1 (2003) Part 31,
5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA M1 (003) Part 31, DefinitePurpose Inverter Fed Motors Inverter Shield TM
Single Phase Poultry Fan Motor, Standard Efficiency,TEAO, Squirrel Cage Rotor
No.: Date: 6/16/2011 Customer : TECHNICAL PROPOSAL Single Phase Poultry Fan Motor, Standard Efficiency,TEAO, Squirrel Cage Rotor Product line : Single-Phase : 48 & 56 TEAO Catalog Number :.3318ES1BRBPFC48
Medium Voltage Motors and Soft Starters
TEFC Severe Duty Motors TEFC Motors 2300 4160V................................................. A-252 TEFC Motors Add-On Modifications............................................. A-253 TEFC 2300V - Electrical
Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors
Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors Applications: Blue Max motors are used in variable frequency drive applications requiring full rated torque at zero speed, utilizing Closed- or Open-Loop
Severe Duty is Standard with WEG W22 motors
W22 Severe Duty TEFC Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency
Inverter Speed Ratio Information
Inverter Speed Ratio Information Guidelines for Application of General Purpose,, Single Speed on Variable Frequency Drives Meets NEMA MG1-2006 Part 30 and Part 31 Section 4.4.2 Unless stated otherwise,
NEMA Premium Efficiency T-Frame Motors. Three-Phase, TEFC Enclosures RELIABILITY MATTERS
NEMA Premium Efficiency T-Frame Motors Three-Phase, TEFC Enclosures RELIABILITY MATTERS RELIABILITY MATTERS Aurora Motors a leading global supplier of NEMA premium vertical pump motors and T-frame motors
MAX-E1 HIGH EFFICIENCY. Severe Duty
MAX-E1 HIGH EFFICIENCY Severe Duty DESIGN FEATURES & CONSTRUCTION ALL MAX-E1 MOTORS DELIVER THESE IMPRESSIVE DESIGN FEATURES HPE - High Pulse Endurance Wire Non-hygroscopic, Class F insulation system High-grade,
AutomationDirect AC Motors Selection Overview
AutomationDirect AC s Selection (1992), High, What does it all mean? In 1992, the U.S. Congress passed legislation requiring that general purpose Design A & B motors meet minimum efficiency requirements,
SECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
The Best Value in Washdown Duty Motors and Drives
The Best Value in Washdown Duty Motors and Drives Long before we invested in the people, equipment and material required to produce Baldor Reliance Washdown Duty motors and drives, we invested our time
IEC Metric Motors DC Metric Motors Metric (IEC) Frame - SCR Rated - IP54
Motors Motors Gearmotors Metric Motors Metric Motors Metric () - SCR Rated - IP54 Application Notes: Please note that one or more of the mounting kits must be used with motors of these frame sizes. See
SUPER-MAX INDUCTION MOTOR
Compliance Certificate No.CC014A CSA Listed No. 1077944 SUPER-MAX INDUCTION MOTOR PREMIUM EFFICIENCY SERIES CSA Certified for Class I Division 2 Groups A, B, C, D T3C TOTALLY ENCLOSED FAN COOLED FRAME:
Premium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 92
Premium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 9 Crown Triton TM Series Premium Efficiency Motors Experience Combined with Technology yundai Induction Motors use Finite Element
NEMA Frame. W Premium Brake Motors NEMA. Foot Mounted 3PH, 60 Hz Aluminum Construction /5T 4.5
W Premium Brake Motors NEMA NEMA Foot Mounted 3PH, 60 Hz Aluminum Construction Performance - Page 77 Dimensions - Pages 67-68 Plus Additional Length shown below FOOT MOUNTED CC133B HP RPM FRAME BRAKE 230/460*
: B3; B5; B14; B34; B35; V1
ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia
NORDIC-PREMIUM EFFICIENCY
CANADIAN STANDARDS ASSOCIAT ION EEV NORDIC-PREMIUM EICIENCY CAST IRON PREMIUM EICIENCY ELECTRIC MOTORS VD COMPATIBLE Meets or exceeds NeMA MG-1 table 1-1 premium efficiency corona & spike resistant MAGNet
The Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
A Full Line of Low Voltage IEC Motors In-Stock
BUILT TO PERFORM WHERE OTHERS FAIL A Full Line of Low Voltage IEC Motors In-Stock Distributed by Elektrim Motors Authorized Distributor: www.elektrimmotors.com or call 855-Go-Elektrim 0.08-220HP Low Voltage
AutomationDirect Motors Selection Overview
AutomationDirect s Selection Overview General purpose or inverter-duty motor? How to choose a general purpose motor vs. an inverter-duty motor General purpose motors have been around for many years. They
Features and Benefits
Features and Benefits ELECTRICAL DESIN z 1 500 HP; 2, 4, 6 pole z 3600, 1800, 1200 RPM z 3 Phase, 60 Hz, 460V z Motors can be rerated for 380, 400 and 415 VAC at 50 Hz. z Designed to meet NEMA M1, M13,
PRODUCT INFORMATION PACKET
PRODUCT INFORMATION PACKET Model No: 184TTFW16026 Catalog No: E2113 5,1800,TEFC,184T,3/60/230/460 Totally Enclosed Fan Cooled (TEFC) Regal and Marathon are trademarks of Regal Beloit Corporation or one
champion series motors
Introducing A brand new series of Super Performers Data Sheet champion series motors FRAME SIZE 63-132M TEFC 3 Phase Squirrel Cage Induction Motors Siemens CHAMPION Series Cage Motors are suitable for
PRODUCTIVITY HAS A NAME. Torque Master Motors
PRODUCTIVITY HAS A NAME Torque Master Motors Premium Efficient Torque Master Motors TORQUE MASTER PE A FORCE TO BE RECKONED WITH Quality. Performance. Dependability. That s what the Torque Master series
Series 2000 Inline Helical Gear Drives & Gear Motors
A L T R A I N D U S T R I A L M O T I O N Series 2000 Inline Helical Gear Drives & Gear Motors INTRODUCING NEW GEARING SOLUTIONS FROM BOSTON GEAR This well recognized Altra Industrial Motion brand has
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM
The Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM
NEMA explosion-proof AC motors. Individual solutions are our standard
NEMA explosion-proof AC motors Individual solutions are our standard BARTEC VARNOST The plant itself came into being in 1957 as one of the small working units of the Zagorje coal mine. Five years later,
SECTION COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT
SECTION 230513 - COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Single phase electric motors. B. Three phase electric motors. 1.2 REFERENCE STANDARDS A. ABMA STD 9
MAX-VH. Vertical Hollow Shaft Motors
MAX-VH Vertical Hollow Shaft Motors Specifications OTHER PERFORMANCE CONSTRUCTION APPLICATION RATING Item Type Of Motors Design Standards Voltages Frequency Output Range RPM (SYN.) Time Duty Frame Size
SECTION GENERAL MOTOR REQUIREMENTS FOR PLUMBING EQUIPMENT
SECTION 22 05 12 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable in the section
W22 Medium Voltage Motors TEFC - Severe Duty
101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan
Aluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
PRODUCT INFORMATION PACKET
PRODUCT INFORMATION PACKET Model No: 215TTDBD6026 Catalog No: GT0019A 10,1800,DP,215T,3/60/230/460 Open Drip Proof (ODP) Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated
PRODUCT INFORMATION PACKET
PRODUCT INFORMATION PACKET Model No: 213THE8053 Catalog No: Y981 5,1800,EPNV,213TC,3/60/230/460 2000:1 Explosion Proof Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated
SWE SERIES (IE3) WONDER ELECTRIC MOTOR (S) PTE LTD. Energy Saving Low Noise Environmental Friendly IEC Dimension Low Vibration European Design
RANGE OF PRODUCTS Three phase asynchronous squirrel-cage & slip ring induction motors Three phase asynchronous self-braking motors Hollow shaft rotor motors Cooling tower motors High motors, (IE2) (IE3)
A. Fan motors and associated equipment shall be sized to operate at 110% of calculated loads and capacities.
PART 1: GENERAL 1.01 This design guidelines contained herein includes the requirements electric motors utilized for electric motor driven systems at Texas State University. It is the intention of this
Product Information Packet ECP84314T-4 60HP,1780RPM,3PH,60HZ,364T,TEFC,FOOT
Product Information Packet ECP84314T-4 60HP,1780RPM,3PH,60HZ,364T,TEFC,FOOT Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
Design Standard. Electric Motors. Detailed specifications follow. PART 1 - GENERAL
Design Standard Detailed specifications follow. PART 1 - GENERAL 1.01 SCOPE This design guidelines contained herein include the requirements of electric motors utilized for electric motor driven systems
[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10
![[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10](/thumbs/93/114259204.jpg "[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10")
THREE-PHASE MOTORS «[32] [33]» MECHANICAL DESIGN Terminal boxes The location of the terminal box in standard design is on top; on the right or on the left are possible. Motors 71-160 frame size have removable
180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
THE INNOVATIVE TEAM IN POWER TRANSMISSION
S m a l l WONDER THE INNOVATIVE TEAM IN POWER TRANSMISSION 2 1 2 The output shaft is constructed from quality C40 steel for maximum output torque. The corrosion-resistant aluminum surface cools easily
Public Review Draft Proposed Addendum cv to Standard , Energy Standard for Buildings Except Low-Rise Residential Buildings
BSR/ASHRAE/IES Addendum CV to ANSI/ASHRAE/IES Standard 90.1-2013 Public Review Draft Proposed Addendum cv to Standard 90.1-2013, Energy Standard for Buildings Except Low-Rise Residential Buildings First
WARREN COUNTY, N.Y. M/E REFERENCE A. Submit manufacturer's product data on all motors and adjustable speed drives.
SECTION 230513 - MOTORS AND ADJUSTABLE SPEED DRIVES PART 1 - GENERAL 1.1 DESCRIPTION A. Provide labor, materials, equipment and services as required for the complete installation designed in Contract Documents.
Order No. of the options EMC filter Class A
Ordering Data for Variant Dependent Options The options listed here (filters, chokes, brake resistors, gland plates, fuses and circuit breakers) are inverter specific. The inverter and the associated options
New Generation 1LE1/1PC1
New Generation LE/PC /2 Orientation /2 Overview /3 Benefits /4 Application /4 Technical specifications /5 Selection and ordering data /7 More information /8 General Line motors with shorter delivery time
DC MOTORS NEMA FRAME SCR RATED
NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque
Energy Saving Three Phase Motors
e-drive Energy Saving Three Phase Motors IEC frames 56 to 400 Outputs 0.09 to 630 IE2 MEPS2006 Type: AHE Aluminium Motors Type: HE Cast-Iron Motors 1 When you need all the features of a premium quality
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
NEMA Premium, High, and Standard Efficiency Vertical Hollow Shaft Pump Motors RELIABILITY MATTERS
NEMA Premium, High, and Standard Efficiency RELIABILITY MATTERS Blue = 90c 50m 0y 0k Blue = Pantone 285C Gray = 40% Black (For reverse logo use 30%) R E L I A B I L I T Y M AT T E R S Aurora Motors a leading
HAIE2 -Efficiency and reliability for industry
HAIE2 -Efficiency and reliability for industry High performance with energy efficiency, this is the meaning of the new CAG electric motor. Low cost and best quality and long lifetime have been the basis
Industrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
Product Information Packet ECP84400T-4 100HP,1785RPM,3PH,60HZ,405T,A40064M,TEFC
Product Information Packet ECP84400T-4 100HP,1785RPM,3PH,60HZ,405T,A40064M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
EC Gold Series Synchronous permanent magnet motor
PRODUCT CATALOG Synchronous permanent magnet motor Synchronous permanent magnet motor 2 EC GOLD SERIES SYNCHRONOUS PERMANENT MAGNET MOTOR Synchronous permanent magnet motor 3 High performance in compact
Rolled Steel Motors. A Complete Line of Single Phase and Three Phase Rolled Steel Motors
Rolled Steel Motors A Complete Line of Single Phase and Three Phase Rolled Steel Motors SINGLE PHASE, TEFC, 56C FRAME 1/3-2 Horse Power 1800 and 3600 RPM C-Flange with Removable Feet High Starting Torque
Product Information Packet ECP4410T-4 125HP,1785RPM,3PH,60HZ,444T,A44076M,TEFC
Product Information Packet ECP440T-4 5HP,785RPM,3PH,60HZ,444T,A44076M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
Product Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F
Product Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
PRICE LIST & BASIC DATA
ROTOR (UK) LIMITED PRICE LIST & BASIC DATA www.rotor.co.uk rotor nl special motors available inclusive of marine execution! Ask for details! November 2008 Three-phase TEFC Squirrel Cage Standard Motors
Product Information Packet ECP4406T-4 150HP,1785RPM,3PH,60HZ,445T,A4488M,TEFC
Product Information Packet ECP4406T-4 150HP,1785RPM,3PH,60HZ,445T,A4488M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
Vertical Pump Motors
NEMA Premium, High, and Standard Efficiency Vertical Pump Motors WP1 or TEFC Enclosures available with Hollow Shaft or Solid Shaft RELIABILITY MATTERS RELIABILITY MATTERS Aurora Motors a leading global
Product Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1
Product Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
TechTop T1A IE1 - ALUMINIUM Industry pricelist Price list validity from (This price list replaces all previous published price lists)
TechTop T1A IE1 - ALUMINIUM pricelist list validity from 01-05-2017 Indumex artikelnr: 4521 4541 4561 3000 rpm 2-pole IE1 T1A 63-1 0,18 54 0,12 52 0,09 55 T1A 63-2 0,25 56 0,18 56 0,12 57 T1A 63-3 0,37
MOTORS. Features: UL Certificate of Compliance CSA Approved and CE Marked Designed for 40 Ambient Temperature, 3300 Ft. Elevation NEMA Design B Torque
BALDOR MOTORS MOTORS ODP Motors - Three Phase Integral Horsepower General Purpose Motors Rigid Base 2, 4 & 6 Pole NEMA Premium & EPACT Class F Insulation System Inverter Duty 1.15 Service Factor 60 Hz
Contact us. Catalog Low voltage generators for diesel and gas engines Industrial Marine applications - series Standard series
Contact us Catalog Low voltage generators for diesel and gas engines Industrial Marine applications - series Standard series We provide motors and generators, services and expertise to save energy and
The Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
THREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
5 Year Warranty Chemical & Process Duty Motors, IEEE-841 (2001) Premium Efficiency TEFC Severe Duty Design Corona Resistant Magnet Wire Class 1,
5 Year Warranty Chemical & Process Duty Motors, IEEE81 (1) Premium Efficiency TEFC Severe Duty Design Corona Resistant Magnet Wire Class 1, Division, roups A, B, C, D Class 1, Zone, roups A, B & C CSA
Product Information Packet ECP84404T-4 75HP,1185RPM,3PH,60HZ,405T,A4072M,TEFC,F
Product Information Packet ECP84404T-4 75HP,1185RPM,3PH,60HZ,405T,A4072M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
Product Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754
Product Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
Product Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1
Product Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
A. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
Product Information Packet EM4410T-4 125HP,1785RPM,3PH,60HZ,444T,TEFC,F1
Product Information Packet EM4410T-4 125HP,1785RPM,3PH,60HZ,444T,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
Design features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake
NEMA C-Face spring applied fail-safe brakes model K and AC mounted brakes with NEMA 2 housing are designed specifically to interchange with Stearns and Dings models as shown in Table1. Design features
Standard Street, El Segundo CA BRUSHLESS SERVO MOTORS
BRUSHLESS SERVO MOTORS To accommodate your complete servo system requirements, Glentek manufactures four complete series (GMB, GMBF, GMBM and GMBN) of high performance, permanent magnet brushless servo
Technical Data sheet. Armstrong motors - 50Hz operation
Technical Data sheet Armstrong - 50Hz operation File No: 48.11l Date: july 05, 2016 Supersedes: 48.11l Date: december 12, 2013 data sheet Commercial 2 standards conformance The conform to iec 60034, iec
X$D Ultra 841 VSS Vertical Solid Shaft Inline Motors Vertical Solid Shaft High Thrust Motors TEFC - IEEE 841 NEMA Premium
GE Power Conversion X$D Ultra 841 VSS Vertical Solid Shaft Inline Motors Vertical Solid Shaft High Thrust Motors TEFC - IEEE 841 NEMA Premium Expect more. X$D Ultra 841 VSS- Setting the standard for reliability
EPACT ENERGY POLICY ACT OF 1992: THE SCOPE OF ELECTRIC MOTORS SUBJECT TO EFFICIENCY STANDARDS ON OCTOBER
EPACT ENERGY POLICY OF 1992: THE SCOPE OF ELECTRIC MOTORS SUBJECT TO EFFICIENCY STANDARDS ON OCTOBER 24, 1997 The Energy Policy Act of 1992 (EPAct) covering efficiency levels of general purpose industrial
BFG range BFGC range BFN range
BFG range BFGC range BFN range LOW AND MEDIUM VOLTAGE FOR HAZARDOUS AREAS EEx d EEx de EEx na - Flameproof Motors - Flameproof Motors With Increased Safety Terminal Box - Non Sparking Motors 1. MARKING
Understanding NEMA Motor Nameplates
Understanding NEMA Motor Nameplates Mission Statement is to be the best (as determined by our customers) marketers, designers and manufacturers of industrial electric motors, mechanical power transmission
CERTIFICATE OF COMPLIANCE
FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL
W21 HIGH EFFICIENCY GENERAL PURPOSE MOTORS
W21 HIGH EFFICIENCY MOTORS!"#$&'#(&)*"&+,-&"./&0,,12#3&4,.5&!"00&678997:;?@&ABCD7=EF=G Data subject to change without notice. PDF processed with CutePDF evaluation edition www.cutepdf.com :7BD ROLLED
Quantum LMV. Low and Medium Voltage AC Induction Totally Enclosed Fan Cooled Motors. GE Power Conversion
GE Power Conversion Quantum LMV Low and Medium Voltage AC Induction Totally Enclosed Fan Cooled Motors NEMA 500 Frames IEC 315 Frames 200-800 HP 150-600 kw 2-12 Pole Ratings to Fit Your Applications NEMA
SECTION OWNER FURNISHED EQUIPMENT
SECTION 11000 - OWNER FURNISHED EQUIPMENT PART I - GENERAL 1.01 GENERAL: A. The Owner has prepurchased and has or will have on site various pieces of equipment to be installed by the Contractor under this
steel standard SST DUCK components Epoxy Resin Rated Insulation System recognized stainless steel output shaft seal
Premium Efficiency Washguard Motors - Now Available! WASHGUARD MOTORS WASHGUARD MOTORS AVAILABLE IN FIVE STYLES Maximum service in critically clean or corrosive environments PREMIUM WASHGUARD ALL-STAINLESS
Why Baldor? Baldor Vector Drives in a brick plant in Australia
Why Baldor? For over 80 years, Baldor has been dedicated to providing customers with the best value in energyefficient industrial electric motors and drives. To be considered as the best value supplier
Jefferson Electric Class I Division 2 Transformers for hazardous locations
Class I Division 2 Jefferson Electric Class I Division 2 Transformers for hazardous locations Jefferson Electric offers a full line of Class I Division 2 transformers. Jefferson Electrics Class I Division
CERTIFICATE OF COMPLIANCE
FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL
Product Information Packet VPECP4316T 75HP,1780RPM,3PH,60HZ,365VP,TEFC,V1
Product Information Packet VPECP4316T 75HP,1780RPM,3PH,60HZ,365VP,TEFC,V1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
Product Information Packet VPECP4313T 75HP,3555RPM,3PH,60HZ,365VP,TEFC,V1
Product Information Packet VPECP4313T 75HP,3555RPM,3PH,60HZ,365VP,TEFC,V1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless