TIE RODS & TIE BAR SYSTEMS

Size: px

Start display at page:

Download "TIE RODS & TIE BAR SYSTEMS"

Baldwin Johnston
6 years ago
Views:

1 TIE RODS & TIE R SYSTEMS For rchitectural Projects Worldwide

TIE RODS / TIE RS For over four decades Sta-lok has established a global reputation for the manufacture and supply of high quality stainless steel solutions to rchitects, Designers and Engineers.

Our specialist Tie Rod Tie ar range of products includes, Fork Ends, Spade Ends and our unique RTP Ends and Centre Discs.

2 TIE RODS / TIE RS For over four decades Sta-lok has established a global reputation for the manufacture and supply of high quality stainless steel solutions to rchitects, Designers and Engineers. Sta-lok Products are manufactured in our own UK factory to the highest standards quality is paramount, products are individually inspected and have full material traceability. Our specialist Tie Rod Tie ar range of products includes, Fork Ends, Spade Ends and our unique RTP Ends and Centre Discs. For projects that require unique design elements, our team of expert technicians can design systems to suit the most demanding specifications. ridges, Office locks, Shopping Centres and Malls, irports, Transport Stations and Residential Homes are just some of the applications where Sta-lok products have helped rchitects and Designers visions become reality. We offer specialist technical advice to clients, so take advantage of our expertise and experience and contact us for advice. 2 Our technical specialists are available to assist with design details and product selection, please contact us for further information. +44 (0) sales@stalok.com Picture: rundel Great Court, London rchitects: HLM Design

TIE RODS / TIE RS ar Diameter M6 M8 M10 M12 M M M22 M24 M27 M M36 ROD FINISH OPTIONS Yield Load Kn 8.9.4 26.1 38.1 72.1 103.6 129.5 149.2 196.4 238.7 349.2 reaking Load Kn 12.5 23.0 36.6 53.

4462) Standard system lengths up to 3 metres can be supplied with a variety of end fitting options.

djustment Sta-lok rod systems are manufactured with threads machined at each end. +/- djustment is achieved by rotation of the rod in a clockwise or counter-clockwise direction.

Where required, rods can be individually labelled and supplied with a location register to speed up identification and site installation.

3 TIE RODS / TIE RS ar Diameter M6 M8 M10 M12 M M M22 M24 M27 M M36 ROD FINISH OPTIONS Yield Load Kn reaking Load Kn Material specification EN Sta-lok tie rods are manufactured from high strength Stainless steel grade 3 (1.4404) and Duplex 25 (1.4462) Standard system lengths up to 3 metres can be supplied with a variety of end fitting options. System lengths up to 6 metres can be manufactured to special order; alternatively rod connectors can be used to achieve longer spans. djustment Sta-lok rod systems are manufactured with threads machined at each end. +/- djustment is achieved by rotation of the rod in a clockwise or counter-clockwise direction. Ready to Install Our systems are supplied pre-assembled and adjusted to your specifications; this means that they can be fitted straight from the box. Where required, rods can be individually labelled and supplied with a location register to speed up identification and site installation. End fitting options Fork ends Spade ends RTP ends Centre discs Polish 240 Grit Self Colour Tie rods are offered with three different finish options Natural (may contain natural grain features) Satin (240 Grit finish) Polished Mechanical Properties M6 - M ars 0.2% Proof strength 0 N/mm2 Tensile strength 700 N/mm2 M - M36 ars 0.2% Proof strength 460 N/mm2 Tensile strength 640 N/mm2 In compliance with S EN :09 S EN :08 + 1: S EN : 3

4 F34 FORK TO FORK SYSTEM 4 Picture: The Forum, Norwich rchitects: Michael Hopkins and Partners

F34 FORK TO FORK SYSTEM Thread M6 M8 M10 M12 M M M22 M24 M27 M M36 Yield Load Kn 8.9.4 26.1 38.1 72.1 103.6 129.5 149.2 196.4 238.7 349.2 C reaking Load Kn +/- djustment 12.5 28 23.0 36 36.6 43 53.

3 8 12.7 19 22 28 34 fully machined tie rod fork, with sleek geometry and a wide range of adjustment, developed to meet the requirements of modern rchitectural design.

5 F34 FORK TO FORK SYSTEM Thread M6 M8 M10 M12 M M M22 M24 M27 M M36 Yield Load Kn C reaking Load Kn +/- djustment D C P D P fully machined tie rod fork, with sleek geometry and a wide range of adjustment, developed to meet the requirements of modern rchitectural design. System length up to 6 metres are available, rod connectors can be used to achieve longer spans. djustment Tie rods and fittings are threaded left hand one end and right hand the other +/- adjustment is achieved by rotation of the rod in a clockwise or counter-clockwise direction. Locking Conical locking nuts have been designed to cover tie bar threads at mid adjustment, providing a clean line between the rod and end fitting. Pins Double headed pins including pin head and locking screw are supplied as standard. Isolating between different materials can be achieved by using isolation washers and sleeves. Ready to Install Tie rod systems are supplied ready to install. Fork Ends are pre-assembled and adjusted to customers pin / pin requirements. Fork Finish Options Fork ends and conical nuts are available with Satin (240 grit finish) as standard, Highly polished finish is optional. 5

6 F33 SPDE TO SPDE SYSTEM 6 Picture: Gangnam Tower, Seoul rchitects: Skidmore Owings Merrill LLP

F33 SPDE TO SPDE SYSTEM Thread Yield Load Kn M6 8.9 M8.4 M10 26.1 M12 38.1 M 72.1 M 103.6 M22 129.5 M24 149.2 M27 196.4 M 238.7 M36 349.2 C reaking Load Kn 12.5 23.0 36.6 53.4 100.9 144.0 180.1 7.

7 F33 SPDE TO SPDE SYSTEM Thread Yield Load Kn M6 8.9 M8.4 M M M 72.1 M M M M M M C reaking Load Kn D +/- djustment C H D H fully machined tie rod spade, with sleek geometry, developed to meet the requirements of modern rchitectural design. System lengths up to 6 metres are available, rod connectors can be used to achieve longer spans. djustment Tie rods and fittings are threaded left hand one end and right hand the other +/- adjustment is achieved by rotation of the rod in a clockwise or counter-clockwise direction. Locking Conical locking nuts provide a clean line between the rod and end fitting. Ready to Install Tie rod systems are supplied ready to install. Spade ends are pre-assembled and adjusted to customers hole centre requirements. Fork Finish Options Spade ends and conical nuts are available with Satin (240 grit finish) as standard, Highly polished finish is optional. 7

8 RTP SYSTEM 8 Picture: Clinton Presidential Centre rchitects: Polshek Partnership

RTP SYSTEM Thread M6 M8 M10 M12 M M M22 M24 M27 M M36 Yield Load Kn 8.9.4 26.1 38.1 72.1 103.6 129.5 149.2 196.4 238.7 349.2 reaking Load Kn +/- djustment 12.5 23.0 36.6 53.4 100.9 144.0 180.1 7.5 273.

9 RTP SYSTEM Thread M6 M8 M10 M12 M M M22 M24 M27 M M36 Yield Load Kn reaking Load Kn +/- djustment Designed for application in glass facades, providing tension and support between steel members. Fully machined with sleek geometry, developed to meet the requirements of modern rchitectural design. System lengths up to 6 metres are available, rod connectors can be used to achieve longer spans. djustment The rods and fittings are threaded left hand one end and right hand the other +/- adjustment is achieved by rotation of the rod in a clockwise or counter clockwise direction. Locking Conical locking nuts provide a clean line between the rod and end fitting. Ready to Install Tie rod systems are supplied ready to install. RTP ends are pre-assembled and adjusted to customers end to end requirements. RTP Finish Options RTP ends and conical nuts are available with Satin (240 grit finish) as standard, Highly polished finish is optional. 9

HD CENTRE DISCS ar Diameter M6 M8 M10 M12 M M M22 M24 M27 M M36 70 80 1 140 180 0 2 260 0 3 3 40 40 55 60 70 70 90 90 C 6.3 8 12.7 19 22 28 34 D 5.5 7 10 18 21 24 27 29 34 Designed to S 59-1:00.

10 HD CENTRE DISCS ar Diameter M6 M8 M10 M12 M M M22 M24 M27 M M C D Designed to S 59-1:00. Material Specification to EN Fully machined centre discs have been designed to fit F34 tie rod fork ends. Discs are available with 3 and 4 holes. djustment Tie rods and fittings are threaded left hand one end and right hand the other +/- adjustment is achieved by rotation of the rod in a clockwise/counter clockwise direction. Hole Position 3 hole discs are manufactured with 1 degree angle between hole centres. 4 hole discs are manufactured to clients specification. Disc Finish Options Satin Highly polished D C 10 1 o Variable

11 HD CENTRE DISCS

12 To find out about our wide range of stainless steel wire rope fittings please refer to our Wire Systems brochure ST-LOK TERMINLS LTD. The Forge. Mistley Heath. Manningtree. Essex CO 2QH. England +44(0)

RIGGING HARDWARE SOLUTIONS for WIRE AND ROD SYSTEMS

RIGGING HARDWARE SOLUTIONS for WIRE AND ROD SYSTEMS YSC QA108 THE STA-LOK STORY The new Sta-Lok range bears clear traces of our marine heritage. When we started manufacturing Sta-Lok rigging hardware in