POPCORN POPPERS MODELS G8, G12, G14, G18. Installation and Operation Instructions. 2M-Y8351 Rev. P 2/29/2013

Transcription

1 G POPCORN POPPERS MODELS G, G2, G4, G Installation and Operation Instructions 2M-Y35 Rev. P 2/29/203

2 SAFETY SYMBOL These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability. Star reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star International Holdings Inc., Company exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use. MAINTENANCE AND REPAIRS Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service. Model No. Serial No. Voltage Purchase Date Authorized Service Agent Listing Reference the listing provided with the unit or for an updated listing go to: Website: customerservice@star-mfg.com Service Help Desk Business :00 am to 4:30 p.m. Central Standard Time Hours: Telephone: (34) -303 Fax: (34) -24 Website: customerservice@star-mfg.com Mailing Address: Star International Holdings Inc., Company 0 Sunnen Drive St. Louis, MO 343 U.S.A 2

3 PRODUCT IDENTIFICATION Star Manufacturing International Popcorn Machines Galaxy Models: G, G2, G4, and G A C B IL2 2M-Y35; Galaxy Popcorn Poppers SPECIFICATIONS Model Capacity Voltage Hz Watts Amps Size Depth Width Higth G oz 20V (230g) 230V G2 20V oz V 50/ (340g) (53. cm) (53. cm) 230V V (90. cm) 4oz G4 240V 50/ (400g) 230V oz 240V 50/0 2.3 G (.2 cm) (.44 cm) (50g) 230V Weight lbs (39.5k) 0 lbs (4.k) 3

4 CAUTION GENERAL INSTALLATION DATA This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. Before using your new equipment, read and understand all the instructions & labels associated with the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit. All shipping containers should be checked for freight damage both visible and concealed. This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier. Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a request for inspection of concealed damage must be made with carrier within 5 days. Be certain to retain all contents plus external and internal packaging materials for inspection. The carrier will make an inspection and will supply necessary claim forms. INSTALLATION Each machine has been properly wired and inspected at the factory for operation on the voltage and type of current specified on the nameplate. CAUTION DO NOT CONNECT TO ANY OTHER TYPE OF CURRENT OR THE MACHINE WILL BE SERIOUSLY DAMAGED. A receptacle is furnished with the G2 20 volt and G4 20 volt popcorn machines. We strongly recommend installation by a licensed electrician. The guarantee of this machine as covered by the warranty does not apply if an improper installation has been made. 20 VOLT MACHINES Machines with a nameplate stamped 20V, are equipped for operation on 20 volt 0 hertz AC single phase service and must be connected to a separate 20 amp circuit with a 3 wire grounded, polarized receptacle. NOTE: The G4 20V machine uses a 30 amp circuit. 240/230 VOLT MACHINES Machines with a nameplate stamped 240V, are equipped for operation on 240 volt 50/0 hertz AC single phase service. Machines with a nameplate stamped 230V, are equipped for operation on 230 volt 50 hertz AC single phase service. All must be connected to a separate 5 amp circuit with a 3 wire grounded, polarized receptacle. 2M-Y35; Galaxy Popcorn Poppers 4

5 CAUTION GENERAL OPERATING INSTRUCTIONS The motor air exhaust holes located on top of the machine must be clear of any obstructions. DO NOT COVER THESE AIR VENT HOLES AS SERIOUS DAMAGE WILL RESULT. Make sure the corn drawer is in place on the machine before starting the popping cycle.. Turn on both switches. 2. For the first batch allow kettle to preheat for 5- minutes. No preheat is required after first batch is popped. 3. Add popping oil to kettle. Immediately add popcorn and seasoning salt and close kettle lid. For best results, ratio is part of oil to 4 parts of corn. Use measuring cups provided or proportioned corn/oil packages. Contact your local Dealer for pre-portioned packages. 4. Immediately empty kettle when popping stops. 5. Repeat step 3 immediately or turn kettle off. IMPORTANT Turn kettle heat switch off when not popping! Never pop corn without oil! SWITCHES The corn freshener and heat lamp switch controls the bottom heating element and the top heat lamp. The kettle heat switch controls the kettle heating element & the corn agitator. This motor should be kept running when there is corn in the kettle to prevent scorching or burning. IL03A All of the above switches are in the ON position when they are lighted. 2M-Y35; Galaxy Popcorn Poppers The kettle heating element is thermostatically controlled. Thermostat adjustment should not be necessary since it has been preset at the factory for the correct popping temperature. Dump the kettle by turning the kettle handle counterclockwise 90 to release its latch and hold the handle in this position while tipping the kettle and handle down (see Figure ). Do not leave the kettle heat & corn agitator switch "ON" () when the machine is not in use. Do not immerse the kettle in water or allow water to come in contact with the heating element. CAUTION Popping corn without oil in the kettle (a dry kettle) is not recommended. Do not connect the machine to direct current (DC) since it is designed to operate on alternating current (AC) only. 5

6 MAINTENANCE - CLEANING After each popping period, wipe the inside and outside of the kettle while it is warm (not hot) with a clean cloth. This is important to keep salt and seasoning from forming a carbonized material which not only lowers popping efficiency but can cause excessive smoking or damage the kettle. Clean the inside and outside kettle shell including the covers and all attached parts with warm water and mild soap or detergent solution (see Figure 2). CAUTION DO NOT IMMERSE THE IN WATER OR ALLOW WATER TO ENTER THE SHELL SINCE THIS WILL DAMAGE ELECTRICAL PARTS INSIDE THE ASSEMBLY. To remove the kettle: Turn off all switches and allow the kettle to cool. Use heat insulating gloves to remove a hot kettle. Disconnect the twist lock plug at the end of the kettle conduit from its receptacle. Turn the kettle handle counterclockwise 90 to release its latch. Hold the handle in this position while tipping the kettle and handle down and pushing up on the bottom of the kettle to remove it from the hooks (see Figure ). To replace heat lamp: Turn off all switches and allow kettle to cool to touch. Remove the () screw holding the lamp shield and pull down on lamp shield to remove it from the top liner. Replace the heat lamp with the same type and wattage lamp. Do not install a lamp higher in wattage than indicated on the label located near the lamp socket (see Figure 3). MAINTENANCE AND REPAIRS Contact the factory, a service representative, or a local service company for service or required maintenance. 2M-Y35; Galaxy Popcorn Poppers

7 Visit our Website at: THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit. LIMITED EQUIPMENT WARRANTY All workmanship and material in Star products have a one () year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken to the closest Star service agency, transportation prepaid. > Star will not assume any responsibility for loss of revenue. > On all shipments outside the United States and Canada, see International Warranty. * The warranty period for the Ultra-Max, Hot Plates, Griddles, Charbroilers is (3) years parts & labor. * The warranty period for the Star-Max, Charbroilers, Griddles, Hot Plates, Fryers & Finishing Oven is (2) years parts & labor. * The warranty period for the JetStar six () ounce & Super JetStar eight () ounce series popcorn machines is two (2) years. * The warranty period for the Chrome-Max Griddles is five (5) years on the griddle surface. See detailed warranty provided with unit. * The warranty period for Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identifiers and point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the non-stick properties of such materials. > This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six () months on parts and ninety (90) days on labor. > This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or the Service Center's sub-agency. > This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and Operating instructions. > This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician. 2M-Y35; Galaxy Popcorn Poppers PARTS WARRANTY Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted, the labor to replace the part is NOT warranted. SERVICES NOT COVERED BY WARRANTY. Travel time and mileage rendered beyond the 50 mile radius limit 2. Mileage and travel time on portable equipment (see below) 3. Labor to replace such items that can be replaced easily during a daily cleaning routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc. 4. Installation of equipment 5. Damages due to improper installation. Damages from abuse or misuse. Operated contrary to the Operating and Installation Instructions. Cleaning of equipment 9. Seasoning of griddle plates installation OR created by acts of God PORTABLE EQUIPMENT Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below. These products should be taken to the Service Agency for repair: * The Model 50FD, 50FF Fryer. * The Model 52TOA Toaster Oven. * The Model J4R, 4 oz. Popcorn Machine. * The Model 5CMA & 52CMA Cheese Melter. * The Model 2MC & 5MC & MCP Hot Food Merchandisers. * The Model 2NCPW & 5NCPW Nacho Chip/Popcorn Warmer. * All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers. * All Nacho Cheese Warmers except Model WLA Series Nacho Cheese Warmer. * All Condiment Dispensers except the Model HPD & SPD Series Dispenser. * All Specialty Food Warmers except Model 30R, RW Series, and WSA Series. * All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series. * All Fast Steamer Models except Direct Connect Series. 0. Voltage conversions. Gas conversions 2. Pilot light adjustment 3. Miscellaneous adjustments 4. Thermostat calibration and by-pass adjustment 5. Resetting of circuit breakers or safety controls or reset buttons. Replacement of bulbs. Replacement of fuses. Repair of damage created during transit, delivery, & ALL: * Pop-Up Toasters * Butter Dispensers * Pretzel Merchandisers (Model PD-A Only) * Pastry Display Cabinets * Nacho Chip Merchandisers * Accessories of any kind * Sneeze Guards * Pizza Ovens (Model PO2 Only) * Heat Lamps * Pumps-Manual The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty. FOR ASSISTANCE Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or our Service Department. In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using. 2M /2/4

8 RECEPTACLE NOTE: SWITCHES ARE VIEWED FROM TERMINAL SIDE AS MOUNTED ON THE MACHINE WIRES # AND #2 MUST BE CONNECTED TO SWITCH TERMINALS AS SHOWN FOR SWITCH LIGHT TO FUNTION PROPERLY SWITCH NOTE: USE THIS DIAGRAM FOR WIRING OF MODEL G2 ONLY ALL OTHER WIRING IS THE SAME AS SHOWN FOR MODELS G PLUG AGITATOR MOTOR 3 FLEXIBLE CONDUIT 4 2 RECEPTACLE HIGH LIMIT HEAT LAMP LAMP SWITCH 9 2 PLUG FLEXIBLE CONDUIT 2 WIRING OF MODEL G LOWER 3 (BLUE) TERMINAL BLOCK (BROWN) FRAME GROUND HIGH LIMIT 9 CORD SET MODEL: G AND G2 THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. STAR MANUFACTURING INTERNATIONAL INC. SK42 Rev F 2/0/200 0 SWITCH 5 RECEPTACLE PLUG FLEXIBLE CONDUIT CONTACTOR NOTE: SWITCHES ARE VIEWED FROM TERMINAL SIDE AS MOUNTED ON MACHINE WIRES #3 AND #4 MUST BE CONNECTED TO TERMINALS AS SHOWN FOR SWITCH LIGHT TO FUNCTION PROPERLY 22 HIGH LIMIT 2 PLC 23 AGITATOR MOTOR LOWER HEAT LAMP 4 TERMINAL BLOCK 9 (BLUE) (BROWN) LAMP SWITCH FRAME GROUND CORD SET 2M-Y35; Galaxy Popcorn Poppers MODEL: G4 AND G THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. STAR MANUFACTURING INTERNATIONAL INC. SK52 Rev E /2/200

9 L G N L G N NOTE: SWITCHES ARE VIEWED FROM TERMINAL SIDE AS MOUNTED ON THE MACHINE WIRES # AND #2 MUST BE CONNECTED TO SWITCH TERMINALS AS SHOWN FOR SWITCH LIGHT TO FUNTION PROPERLY RECEPTACLE RECEPTACLE PLUG AGITATOR MOTOR SWITCH PLUG FLEXIBLE CONDUIT 2 H/L FLEXIBLE CONDUIT HEAT 9 LAMP A LAMP SWITCH 9 2 A A HIGH LIMIT WIRING OF G 240VE MODEL LOWER 3 TERMINAL BLOCK NOTE: USE THIS DIAGRAM FOR WIRING OF MODEL G2 240VE ONLY ALL OTHER WIRING IS THE SAME AS SHOWN FOR MODEL G FRAME GROUND 4 GREEN INLET 5 MODEL: G AND G2, 230CE THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. STAR MANUFACTURING INTERNATIONAL INC. SK3 Rev B /04/2005 NOTE: SWITCHES ARE VIEWED FROM TERMINAL SIDE AS MOUNTED ON MACHINE WIRES #3 AND #4 MUST BE CONNECTED TO TERMINALS AS SHOWN FOR SWITCH LIGHT TO FUNCTION PROPERLY 2M-Y35; Galaxy Popcorn Poppers RECEPTACLE PLUG FLEXIBLE CONDUIT AGITATOR MOTOR HIGH LIMIT HEAT LAMP 9 SWITCH LOWER 2 LAMP SWITCH 2 GREEN 9 INLET TERMINAL BLOCK MODEL: G4 AND G, 230CE THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. 9 STAR MANUFACTURING INTERNATIONAL INC. SK3 Rev A /04/2005

10 C-T00 Grooved Pin M-Y35; Galaxy Popcorn Poppers SOME ITEMS ARE INCLUDED FOR ILLUSTRATIVE PURPOSES ONLY AND IN CERTAIN INSTANCES MAY NOT BE AVAILABLE MODEL - G-Y/G2-Y, / 2 oz. 20/240V/230CE STAR MANUFACTURING INTERNATIONAL, INC. SK0 Rev. G //4

11 PARTS LIST MODEL: G-Y, G2-Y 20V, 240V, 230CE February 2, 203, Rev. O Fig No Part No Qty Description Application 2M-Y35; Galaxy Popcorn Poppers - 2M-Y02 LABEL STRIPE YELLOW/BLUE (Not Shown) G2-2M-Y420 LABEL STRIPE (Not Shown) G2 2M-Z93 LABEL FRONT 2 SWITCH UNITS 2 SWITCH UNITS 2M-Z000 LABEL FRONT 3 SWITCH UNITS 3 SWITCH UNITS 2E-Z930 2 SWITCH (LIGHTED) after serial number G002 G 2 2E-Z930 3 SWITCH (LIGHTED) before serial number G002 G 2E-Z930 2 SWITCH (LIGHTED) after serial number G20539 G2 2E-Z930 3 SWITCH (LIGHTED) before serial number G20539 G2 3 C3-Y952 BRACKET CATCH 4 2R-Y44 2 CATCH MAGNETIC 5 C3-Y953 COVER BRACKET C3-Y3 2 BRACKET HINGE LEFT C3-Y44 2 BRACKET HINGE RIGHT C3-Y LOWER DOOR 9 C3-Y45 2 DOOR PULL ASSEMBLY (INC.IN DOOR ASSYS.) 0 C3-G04 LEFT DOOR ASSEMBLY C3-G03 RIGHT DOOR ASSEMBLY 2 2L-Y3 OIL MEASURE CUP 2 CUP (PLASTIC) 3 2L-Y2 CORN MEASURE CUP 2 CUP (PLASTIC) 4 2L-Y49 SCOOP - POPCORN (PLASTIC) D5-HWP00 CORD ASSEMBLY 20V G 5 C3-G022 CORD ASSEMBLY 240V G / G2 C3-G40 CORD ASSEMBLY 20V G2 2E-Z05 CORD ASSEMBLY 230CE G / G2 2K-Y29 BUSHING-STRAIN RELIEF 20V G 2K-Y4 BUSHING 20V/240V G2 C3-Y940 DRAWER CORN 2A-904 FOOT 2P-Y PLUG - FOOT 2C-55 SCREW - FOOT 9 2E-Y249 BLOCK TERMINAL 20 2P-45 4 CLIP-TY 2 2N-Y502 ELEMENT-0 WATT 20V 2N-Y503 ELEMENT-90 WATT 240V/230CE 22 2K-Y39 BUSHING HEYCO 23 2Q-Y30 2 GLASS SIDE (TEMPERED) 2-5/" x -3/4" 24 2I-Y3 CHANNEL GLASS (TOP/BOTTOM) 25 2I-Y40 CHANNEL GLASS (UPRIGHT) 2 2Q-Y0 GLASS FRONT; 2-5/" x -3/4" 2 2E-Y22 SOCKET LAMP 2E-Y CE 2S-33 LAMP-50W 20V G 2 2S-Y223 LAMP - 250W 20V-20V G2 2S-Y2 LAMP 50W 230CE/240V G / G2 2S-Y34 LAMP 250W 240V G2 29 2B-Y29 LAMP SHIELD 30 2C-23 0 WASHER LOCK 3 2C SCREW Star International Holdings, Inc. Company

12 PARTS LIST February 2, 203, Rev. O MODEL: G-Y, G2-Y 20V, 240V, 230CE Fig No Part No Qty Description Application 32 2E-T042 RECEPTACLE 20V 2E-Z009 OUTLET STRAIGHT BLADE 230CE/240V 33 2A-Y45 PIN STOPPER-SHORT 34 2C-Y4 SCREW 35 2A-Y032 PIN STOPPER 3 2C-Y4 SCREW 3 2C- 2 BURR 3 2F-Y5 HANGER REAR 39 2C-25 2 NUT 40 2A-Y033 ROD SPACER 4 2F-Y5 HANGER FRONT 42 2R-Y40 FAN 43 PS-G0 2U-Y23, MOTOR REPL KIT 20V PS-G02 2U-Y24, MOTOR REPL KIT 240V/230CE 44 2I-Y09 CUSHION-MOTOR 45 C3-G090 LID ASSEMBLY LEFT 4 2R-Y39 TAB-COVER 4 2B-Y050 BLADE AGITATOR 4 2A-Y02 COLLAR-AGITATOR 49 C3-G09 LID ASSEMBLY RIGHT 5 2F-Z50 CROSS BAR ASSEMBLY 52 2A-Y92 2 KNOB 53 C3-G033 SHAFT ASSEMBLY 54 2D-Y044 SPINNER TOP 55 2C-Y4 SCREW 5 2A-G032 SHAFT-MOTOR ASSEMBLY 5 2E-Y9253 INLET 230CE 5 2R-Y3 KNOB 230CE 59 C3-G044 TOP ASSEM G-AT GY-230CE, G2-Y-230CE, G-AT, G2-AT 0 C3-G09 LEFT FILLER ASSY C3-G020 RIGHT FILLER ASSY 2 C3-Y954 BOTTOM FRONT WRAP 3 C3-Z9 TOP FRONT WRAP GALAXY, 2 SWITCH UNITS 2 SWITCH UNITS C3-Y95 TOP FRONT WRAP GALAXY, 3 SWITCH UNITS 3 SWITCH UNITS C3-G04 TOP ASSEM G G-Y, G2-Y -- 2E-5 FEMALE RECEPTACLE (WALL) G2-20V ONLY -- 2M-Y34 CAUTION - HOT LABEL -- 2M-Z000 INSTRUCTION LABEL (CLEAR) -- 2C-T00 GROOVED PIN / x /2 2M-Y35; Galaxy Popcorn Poppers Star International Holdings, Inc. Company

13 M-Y35; Galaxy Popcorn Poppers Sold as a kit MODEL G OZ. 20/230CE STAR MANUFACTURING INTERNATIONAL, INC. SK2 Rev. C 3/2/0

14 PARTS LIST November 22, 200, Rev. O MODEL: G ASSEMBLY Fig No Part No Qty Description Application - C3-G09 ASSEMBLY COMPLETE 20V - C3-G095 ASSEMBLY COMPLETE 230CE/240V 2P-354 CAP-TWIST LOCK 20V 2P-Z00 PLUG, STRAIGHT BLADE 230CE/240V 2 2K-33 2 BUSHING 3 2E-Y03 CONDUIT 4 2E- CONNECTOR 5 2E-Y49 WASHER 2E-Z0325 WIRE #, WIRE KIT ASSEMBLY 20V 2E-Z WIRE #, WIRE KIT ASSEMBLY 230CE/240V 2E-Z0325 WIRE #2, WIRE KIT ASSEMBLY 20V 2E-Z0325 WIRE # (GND), WIRE KIT ASSEMBLY 20V C3-G045 WIRE #, (GND), WIRE KIT ASSEMBLY 230CE/240V 9 C3-G030 SHELL ASSEMBLY, OZ. 0 2C NUT-ACORN 2R-Y92 HANDLE 2 2P-Y092 RETAINING RING 3 2C-Y9 2 WASHER 4 2P-Y0 SPRING 5 2A-Y9 ROD-CATCH 2A-Y022 SET SCREW 2A-Y05 2 STOPPER 2C-H0 4 WASHER-LOCK 9 2C SCREW 20 C3-Y- CHANNEL-RUBBER 2 2C-250 NUT 22 2C-2 EXT. WASHER 23 C3-Y043 3 CLAMP 24 C3-Y042 CLAMP C3-Z524 LUG GB 20V 25 2E-Z032 WIRE #, WIRE KIT ASSEMBLY 20V 2E-Z WIRE #, WIRE KIT ASSEMBLY 230CE/240V 2T-23 20V (#G00925 & BELOW) 2 2T-Y422 20V (#G0092 & ABOVE) 2T-Y CE/240V (#G009 & ABOVE) 2 2N-Y5592 ELEMENT HEATING 420 WATT 20V 2N-Y5593 ELEMENT HEATING 420 WATT 230CE/240V 2 2A-Y02 SPACER-LONG 29 2A-Y02 2 SPACER 30 2F-Z009 PLATE- 3 C3-G029-PS LINER ASSEMBLY, STUDS 32 PS-G499 HIGH LIMIT REPLACMENT KIT 20V 2T-Z02 HIGH LIMIT, manufactured after Aug V/230CE/240V 33 2C-Z000 SCREW 34 2C-255 NUT 35 2C-25 LOCKWASHER NI C3-Z53 3/4 SLEEVING 4.5, WIRE 20V/240V 2M-Y35; Galaxy Popcorn Poppers Star International Holdings, Inc. Company

15 M-Y35; Galaxy Popcorn Poppers Sold as a kit MODEL G2 2 OZ. 20/240V/230CE STAR MANUFACTURING INTERNATIONAL, INC. SK3 Rev. D 3/2/0

16 PARTS LIST November 22, 200, Rev. O MODEL: G2 ASSEMBLY Fig No Part No Qty Description Application - C3-G20 ASSEMBLY COMPLETE 20V - C3-G09 ASSEMBLY COMPLETE 230CE/240V 2P-354 CAP-TWIST LOCK 20V 2P-Z00 PLUG, STRAIGHT BLADE 230CE/240V 2 2K-33 2 BUSHING 3 C3-Y03 CONDUIT 4 2E- CONNECTOR 5 2E-Y49 WASHER 2E-Z V WIRE #, WIRE KIT ASSEMBLY 2E-Z CE/240V 2E-Z V WIRE #2, WIRE KIT ASSEMLBY 2E-Z CE/240V 2E-Z V WIRE (GND), WIRE KIT ASSEMBLY 2E-Z CE/240V 9 C3-G030 SHELL ASSEMBLY, OZ. 0 2C NUT-ACORN 2R-Y92 HANDLE 2 2P-Y092 RETAINING RING 3 2C-Y9 2 WASHER 4 2P-Y0 SPRING 5 2A-Y9 ROD-CATCH 2A-Y022 SET SCREW 2A-Y05 2 STOPPER 2C-H0 4 WASHER 9 2C SCREW 20 C3-Y- CHANNEL RUBBER 2 2C-250 NUT 22 2C-2 0 EXT. WASHER 23 C3-Y043 3 CLAMP 24 C JUMPER-SHORT 20V 25 2E-Z V WIRE #, WIRE KIT ASSEMLBY 2E-Z CE/240V 2 C3-Z52 JUMPER 20V 20V C3-Z525 LUG G2-20V 2T-23 20V (#G20593 & BELOW) 2 2T-Y V (#G20594 & ABOVE) 2T-Y CE/240V (#G2052 & ABOVE) 2 2N-Y V ELEMENT HEATING 420 WATT 2N-Y V/230CE 29 2N-Y V ELEMENT HEATING 300 WATT 2N-Y V/230CE 30 2A-Y02 SPACER-LONG 3 2A-Y02 2 SPACER 32 2F-Z009 PLATE- 33 C3-G029-PS LINER ASSEMBLY, STUDS 34 PS-G499 HIGH LIMIT REPL. KIT 20V 2T-Z02 HIGH LIMIT, (manufactured after Aug. 200) 20V/230CE/240V 35 2E-Z032 WIRE #, WIRE KIT ASSEMLBY 20V 3 2E-Z040 WIRE #, WIRE KIT ASSEMLBY 230CE/240V 3 2C-Z000 2 SCREW 3 2C NUT 39 2C-25 2 LOCKWASHER 40 2C- 2 WASHER /4 NI C3-Z53 4 SLEEVING 4.5, WIRE 20V/240V 2M-Y35; Galaxy Popcorn Poppers Star International Holdings, Inc. Company

17 M-Y35; Galaxy Popcorn Poppers ILLUSTRATIVE PURPOSES ONLY AND IN CERTAIN INSTANCES MAY NOT BE AVAILABLE MODEL - G4/G 4 / oz. 20/240V/230CE STAR MANUFACTURING INTERNATIONAL, INC. SK Rev. E 2/2/3

18 PARTS LIST December 2, 20, Rev. O MODEL: G4, G 20V, 240V, 230CE Fig No Part No Qty Description Application - 2E-Y02 RECEPTACLE - WALL 20V - 2M-Y0 LABEL STRIPE YELLOW/BLUE - 2M-Y352 LABEL STRIPE 2M-Z9300 LABEL-PANEL 2 SWITCH manufacture after serial number G40433 G4 3 SWITCH manufacture before serial number G E-Z930 2 SWITCH manufacture after serial number G0 G 3 SWITCH manufacture before serial number G0 3 C3-Y952 BRACKET CATCH 4 2R-Y44 2 CATCH MAGNETIC 5 C3-Y953 COVER BRACKET C3-Y3 2 BRACKET HINGE-LEFT C3-Y44 2 BRACKET HINGE-RIGHT C3-Y LOWER DOOR 9 C3-Y45 2 DOOR PULL ASSEMBLY 0 C3-G4 LEFT DOOR ASSEMBLY C3-G45 RIGHT DOOR ASSEMBLY 2 2L-Y3 CUP-OIL MEASURE 2 CUP (PLASTIC) 3 2L-Y2 2 CUP MEASURE (PLASTIC) 4 2L-Y49 SCOOP-POPCORN (PLASTIC) C3-G435 20V 5 C3-G022 CORD SET ASSEMBLY 240V 2E-Z05 230CE 2K-Y29 BUSHING-STRAIN RELIEF 20V/240V C3-Y42 CORN DRAWER 2A FOOT NI 2P-Y PLUG NI 2C-55 4 SCREW 0 X 24- /2 STL RHP 9 2E-Y249 BLOCK TERMINAL 20 2P-45 9 CLIP-TY 2N-Y2 20V 2 ELEMENT 0 WATT 2N-Y V/230CE 22 2K-Y39 BUSHING HEYCO 23 2Q-Y3 2 GLASS - SIDE 24 2I-Y3 4 CHANNEL GLASS (SIDE - TOP & BOTTOM) 25 2I-Y40 CHANNEL GLASS (UPRIGHT) 2 2Q-Y05 GLASS-FRONT 2 2I-Y39 2 CHANNEL GLASS (FRONT - TOP & BOTTOM) 2E-Y22 LAMP SOCKET 2 2E-Y9433 SOCKET LAMP 230CE 2S-Y223 20V LAMP WATT 29 2S-Y34 240V 2S-Y2 LAMP -50 WATT 230CE 30 2B-Y29 LAMP SHIELD 2E-Y30 20V 3 CONTACTOR 2E-Y3 240V - N/A ON 230CE VERSION 2M-Y35; Galaxy Popcorn Poppers Star International Holdings, Inc. Company

19 PARTS LIST 2, 203, Rev. O 2M-Y35; Galaxy Popcorn Poppers MODEL: G4, G 20V, 240V, 230CE Fig No Part No Qty Description Application 2E-Y2 OUTLET LOCKING 20V 32 2E-Z009 FLANGED OUTLET, 5A 250V 230CE/240V after //2002 2E-Y290 OUTLET, LOCKING 5A, 250V 240V/ before // A-Y45 PIN STOPPER - SHORT 34 2C- 2 BURR 35 2C-Y4 SCREW 3 2A-Y032 PIN STOPPER 3 2F-Y5 HANGER REAR 3 2C-25 2 NUT 39 2C-Y4 SCREW 40 2A-Y2 ROD SPACER 4 2F-Y5 HANGER FRONT 42 2R-Y40 FAN 43 PS-G0 2U-Y23, MOTOR REPL KIT 20V PS-G02 2U-Y24, MOTOR REPL KIT 240V/230CE 44 2I-Y09 CUSHION - MOTOR 45 2C SCREW 4 2C-23 WASHER 4 C3-G4 LID ASSEMBLY - RIGHT 4 2R-Y39 TAB COVER 49 2B-Y25 BLADE AGITATOR 50 2A-Y02 COLLAR - AGITATOR 5 C3-G4 LID ASSEMBLY - LEFT 52 2F-Z502 CROSS BAR 54 2A-Y92 2 KNOB 55 C3-G4 SHAFT ASSEMBLY 2C-T00 GROOVE PIN 5 2D-Y044 SPINNER TOP 5 2C-Y4 SCREW 5 2A-G44 SHAFT-MOTOR ASSEMBLY 59 2E-Y9253 INLET 230CE ONLY 0 2R-Y3 KNOB 230CE C3-G09 LEFT FILLER ASSY 2 C3-G020 RIGHT FILLER ASSY 3 C3-Y954 BOTTOM FRONT WRAP Star International Holdings, Inc. Company

20 Sold as a kit MODEL G4 / G STAR MANUFACTURING INTERNATIONAL, INC. 4 / OZ. 20/240V/230CE SK4 Rev. D 3/29/2 39 2M-Y35; Galaxy Popcorn Poppers

21 PARTS LIST December 2, 20, Rev. O 2M-Y35; Galaxy Popcorn Poppers MODEL: G4/ ASSEMBLY Fig No Part No Qty Description Application - C3-G49 ASSEMBLY COMPLETE 20V G4 - C3-G495 ASSEMBLY COMPLETE 230CE/240V G4 - C3-G494 ASSEMBLY COMPLETE 230CE/240V G 2P-Y25 PLUG 20A 25V 20V 2P-Z00 PLUG, STRAIGHT BLADE 230CE/240V on or after //2002 2P-Y29 PLUG 5A250V NEMA L-5P, 230CE/240V before // K-33 2 BUSHING 3 2E-Y405 CONDUIT 4 2E- CONNECTOR 5 2E-Y49 WASHER 2E-Z032 20V WIRE (GND) WIRE ASSEMBLY KIT 2E-Z04 230CE/240V 2E-Z032 20V WIRE #5, WIRE ASSEMBLY KIT 2E-Z04 230CE/240V 2E-Z032 20V WIRE #, WIRE ASSEMBLY KIT 2E-Z04 230CE/240V 9 C3-G4 SHELL ASSEMBLY 0 2C NUT-ACORN 2R-Y92 HANDLE 2 2P-Y092 RETAINING RING 3 2C-Y9 2 WASHER 4 2P-Y0 SPRING 5 2A-Y9 ROD-CATCH 2A-Y022 SET SCREW 2A-Y05 2 STOPPER 2C-H0 4 WASHER 9 2C SCREW 20 C3-Y-2 CHANNEL RUBBER 2 2C-2 2 WASHER 22 2C NUT 23 C3-Y33 3 CLAMP-ELEMENT 24 C3-Y043 2 CLAMP 25 C3-Z52 JUMPER 20V 2E-Z04 WIRE #5, WIRE ASSEMBLY KIT 230CE/240V 2 2E-Z032 WIRE #9, WIRE ASSEMBLY KIT 20V 2E-Z032 WIRE #25, WIRE ASSEMBLY KIT 230V/240V 2 2E-Z032 LUG-RIGHT, WIRE ASSEMBLY KIT 20V C3-Y335 LUG-RIGHT 240V 2 C3-Z52 LUG 20V G4 2T-23 20V (#G40352, G0299 & BELOW) 30 2T-Y422 20V (#G40353, G0300 & ABOVE) 2 2T-Y CE/240V (#G4034, G0300 & ABOVE) 2T V (BELOW #G0299, ENCLOSED STYLE) 3 2N-3 ELEMENT00 WATT 20V G4 2N-33 ELEMENT 00 WATT 230CE/240V G4 / G 2N-34 ELEMENT 00 WATT 230CE/240V G 32 2N-Y23 ELEMENT 400 WATT 230CE/240V 2N-Y22 ELEMENT 400 WATT 20V G4 33 2A-Y25 SPACER-LONG 34 2A-Y2 2 SPACER 35 2F-Z0020 PLATE- 3 C3-G422-PS LINER ASSEMBLY Star International Holdings, Inc. Company

22 PARTS LIST December 2, 20, Rev. O MODEL: G4/ ASSEMBLY Fig No Part No Qty Description Application 3 PS-G499 G4 & G, HIGH LIMIT REPLACEMENT KIT 20V/230CE 2T-Z02 2 HIGH LIMIT, manufactured after Aug V/230CE/240V 3 2E-Z032 WIRE #24, WIRE KIT ASSEMBLY 20V/230CE/240V 39 2E-Z032 2 WIRE #23, WIRE KIT ASSEMBLY 20V/230CE/240V 40 2C-Z000 2 SCREW 4 2C NUT 42 2C-25 2 LOCKWASHER 2M-Y35; Galaxy Popcorn Poppers Star International Holdings, Inc. Company

23

24 STAR INTERNATIONAL HOLDINGS INC. COMPANY Star - Holman - Lang - Wells - Bloomfield - Toastmaster 0 Sunnen Drive, St. Louis, MO 343 U.S.A. (34)