ROLLER GRILLS. MODEL 20C, 30C, 45C, 45ST, 50C, 50ST, 75C 54IC/ISC, 90IC/ISC Infinite and Electronic Controls. Installation and Operation Instructions

Transcription

1 ROLLER GRILLS MODEL 0C, 0C, 4C, 4ST, 0C, 0ST, C 4IC/ISC, 90IC/ISC Infinite and Electronic Controls Installation and Operation Instructions M-Z84 Rev. H 8/04/4 0SCBB

2 SAFETY SYMBOL These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability. Star reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star International Holdings Inc., Company exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use. MAINTENANCE AND REPAIRS Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service. Model No. Serial No. Voltage Purchase Date Authorized Service Agent Listing Reference the listing provided with the unit or for an updated listing go to: Website: customerservice@star-mfg.com Service Help Desk Business 8:00 am to 4:0 p.m. Central Standard Time Hours: Telephone: (4) 8-0 Fax: (4) 8-4 Website: customerservice@star-mfg.com Mailing Address: Star International Holdings Inc., Company 0 Sunnen Drive St. Louis, MO 4 U.S.A

3 TABLE OF CONTENTS PAGE NUMBER GENERAL SAFTEY INFORMATION GENERAL INSTALLATION INFORMATION 4 Connection Load 4 GENERAL OPERATING INSTRUCTIONS Cleaning ELECTRONICALLY CONTROLLED: Start-up, Heating & Programing WARRANTY WIRING DIAGRAM 8- EXPLODED VIEW (C Series), PARTS LIST 0 MODEL SERIES 4 0 MODEL SERIES, 4 MODEL SERIES, 8 0 MODEL SERIES 9, 0 MODEL SERIES, EXPLODED VIEW (ic/isc Island Series) 4 PARTS LIST 4 MODEL SERIES, 0 MODEL SERIES, 8 CAUTION GENERAL SAFETY INFORMATION This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. Before using your new equipment, read and understand all the instructions & labels associated with the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit. All shipping containers should be checked for freight damage both visible and concealed. This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier. Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a request for inspection of concealed damage must be made with carrier within days. Be certain to retain all contents plus external and internal packaging materials for inspection. The carrier will make an inspection and will supply necessary claim forms.

4 GENERAL INSTALLATION INFORMATION The grill should be connected to a wall type receptacle, a direct line or individual branch circuit. An individual branch circuit is preferred. If connected to an overloaded circuit the grill will not operate properly. The unit should be level when installed. Models equipped with bun boxes must be level to utilize the self-closing feature of the bun drawer. Adjustable 4-inch legs are standard on the series and available for all other models. This grill is equipped for the voltage shown on the nameplate. It will operate on alternating current only, however, the specified voltage must be applied. CONNECTION LOAD: INFINITE CONTROL MODEL SERIES WATTAGE 0C, 0SC 90 0C, 0SC, 0CF, 0SCF, 0CBB, 0CBBC, 0SCBB, 0CDV 0 4C, 4SC, 4CBB, 4SCBB, 4CDV 0 0C, 0SC, 0CF, 0SCF, 0CBB, 0CBBC, 0SCBB, 0CDV 4IC, 4ISC 0 C, SC, CBB, SCBB, FF, SCF 08/40V 80/400 C, SC, CBB, SCBB, CDV 0V 0 C, CF, SC, SCF, CBB, SCBB, CDV 0V 00 CFV 0V IC, 90ISC 08V 90IC, 90ISC 40V 840 ELECTRONIC CONTROL MODEL SERIES WATTAGE 0SCE 90 0CE, 0SCE, 0SCEX, 0CBBE 0SCBBE 0 4SCE, 4SCRE 0 0CE, 0SCE, 0SCEX 0CBBE, 0SCBBE, 0CBBES 4ICE, 4ISCE 0 CE, SCE, CBBE, CBBES, SCBBE, SCRE 08/40V, SCFE 80/400 CE, SCE, CBBE, SCBBE, SCRE 0V 0 90ICE, 90ISCE 08V 90ICE, 90ISCE 40V 840 DO NOT CONNECT TO DIRECT CURRENT (DC). WARNING IMPORTANT UNLEVEL UNITS COULD RESULT IN HAVING PRODUCT TRAVEL FROM ONE SIDE TO THE NEXT, OVER A PERIOD OF TIME. 4

5 GENERAL OPERATING PROCEDURES The main switch located on the control panel controls all the power to the unit. With the main switch on, the rollers will turn, but no heat will be supplied unless the heat controls are turned on. For flexibility the heating section of the grill is divided into two individually controlled heat sections. The right control regulates the heat to the rear section and the left control regulates the heat to the front section. The switch is lighted to indicate when the unit is turned on. On Infinite control grills a signal light is provided above each heat control and indicates when the heated section is on. An additional light is provided on the end housing of the unit. This light indicates the position of the main power switch when either the optional bun drawer front or merchandising door obstructs the control panel view. Bun box equipped models require the removal of the bun drawer to remove the bun pan and to remove the drip tray when access to the rear of the unit is obstructed. To remove the bun drawer, grab the drawer by both sides and pull it out all the way. Lift the front to unhook the drawer slide from rear drawer roller. Pull the drawer the remainder of the way out. Use caution not to drop the drawer when reaching the end of the drawer slide travel. To reinsert the drawer, first hook the drawer slide over the front roller then the back roller. Do not operate the grill without the drip tray in place. COOKING The heat controls provide an infinite range of settings for a wide variety of food products and installation conditions. The size, content and shape of the product and the installation of any sanitary food shields or sneeze guards will determine the proper heat setting. The National Sanitation Foundation requires that perishable foods be kept at 40 F or above during serving periods. Do not keep the food product on a low setting for more than two hours. The product should be kept refrigerated until ready for use. Cooking time will vary depending on the starting temperature and the qualities of the product. For best results when cooking hot dogs use a hot dog made for grilling. CAUTION CAUTION USE ONLY PLASTIC OR COATED UTENSILS FOR HANDLING THE FOOD PRODUCT. METAL COULD SCRATCH THE ROLLER COATING AND AFFECT THE CLEAN ABILITY OF THE ROLLERS. DO NOT USE STEEL WOOL OR ABRASIVE CLEANERS ON THE ROLLERS. SCRAPES WILL VOID THE WARRANTY. USE CAUTION WHEN CLEANING A HOT GRILL TO PREVENT BURNS OR BODILY INJURY. CLEANING Before cooking for the first time, wash the rollers with mild soap and water using a soft cloth. Do not use metal utensils when cooking. Scratches and scrapes will hamper the ability to easily clean the rollers. Never use steel wool or abrasive cleaners on the rollers. This will damage the finish and the roller bearings. The rollers clean most easily when hot. Use caution when cleaning to prevent burns and bodily injury. Clean the rollers with a clean wet cloth. Wipe from the ends to the center to prevent forcing debris into the roller seals. Do not allow the food product to build up and bake onto the roller surface. The exterior of the unit should be cleaned using a mild detergent or non-abrasive cleaner. Clean the entire unit daily to insure long life and satisfactory performance as well as to maintain an attractive appearance. Do not clean with water jet equipment. MAINTENANCE AND REPAIRS Contact the factory, a service representative or a local service company for service or required maintenance. Replacement cord sets must be purchased from Star Manufacturing International, Inc.

6 OPERATING PROCEDURES FOR ELECTRONIC GRILLS START-UP When initially turning on power to the electronic controlled grill, it will be in the HOLD mode. The displays will flash until the setpoint temperature is reached. The grill will beep once when it is up to temperature. Infinite controlled grills have no notification when operating temperature is reached. HEATING The size, content, and shape of the product and the installation of any sanitary food shields or sneeze guards will determine the proper heat setting. The National Sanitation Foundation requires that all perishable foods be kept at 40 F or above during serving periods. The product should be kept refrigerated until ready to use. Heating times vary depending on the starting temperature and the qualities of the product. For best results, use a hot dog made for grilling. Before cooking for the first time, wash the rollers with mild soap and water using a soft cloth. When the electronic controled grills are initially turned on, the displays will flash the HOLD temperature until the grill reaches that setpoint. With the grill preheated to the hold temperature, load with the desired product and press the HEAT button. The grill will then go into the heat mode and the displays will flash until the HEAT temperature is reached. After the heating cycle, the grill will beep four times and the food product will be at the serving temperature. NOTE: Based on the product being heated, some experimentation is required to find the optimal HEAT temperature and HEAT time to bring the product up to temperature in an acceptable amount of time. PROGRAMMING The electronic controls provide programmable HEAT and HOLD settings for a variety of food products and installation conditions. To program the electronic roller grill:. With the grill on, push and hold the and on the side you wish to program together for three seconds until the alarm beeps once and the display blanks.. To set the heat temperature and/or heat time, push the heat button. The last saved heat time will be displayed and the HEAT LED will flash and HEAT TIME indicator will be ON. Use the and buttons to adjust to the desired time, then press the HEAT button again. The HEAT TIME LED indicator will turn off and the HEAT TEMP LED indicator will now be lit. When programming the HEAT temperature is complete, push the HEAT button one more time to exit the programming mode.. To set the hold temperature, repeat step above then push the HOLD button. The last saved hold temperature will be displayed and HOLD LED will be ON. Use the and buttons to adjust to the desired temperature, then press the HOLD button again to exit programming mode. 4. To turn the heat off to the front or rear section, press and hold the for that section for seconds. "OFF" will be displayed. To turn the section back on, press the HEAT or HOLD button. Seal-Max PAT. #,8,80 PAT. #,0,0 DURATEC PAT. #,9,9 MADE IN U.S.A. Electronic Control Board

7 Visit our Website at: The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty. FOR ASSISTANCE THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit. LIMITED EQUIPMENT WARRANTY All workmanship and material in Star products have a one () year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken to the closest Star service agency, transportation prepaid. > Star will not assume any responsibility for loss of revenue. > On all shipments outside the United States and Canada, see International Warranty. * The warranty period for the Ultra-Max, Hot Plates, Griddles, Charbroilers is () years parts & labor. * The warranty period for the Star-Max, Charbroilers, Griddles, Hot Plates, Fryers & Finishing Oven is () years parts & labor. * The warranty period for the JetStar six () ounce & Super JetStar eight (8) ounce series popcorn machines is two () years. * The warranty period for the Chrome-Max Griddles is five () years on the griddle surface. See detailed warranty provided with unit. * The warranty period for Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identifiers and point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the non-stick properties of such materials. > This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six () months on parts and ninety (90) days on labor. > This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or the Service Center's sub-agency. > This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and Operating instructions. > This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician. PARTS WARRANTY Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted, the labor to replace the part is NOT warranted. SERVICES NOT COVERED BY WARRANTY. Travel time and mileage rendered beyond the 0 mile radius limit. Mileage and travel time on portable equipment (see below). Labor to replace such items that can be replaced easily during a daily cleaning routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc. 4. Installation of equipment. Damages due to improper installation. Damages from abuse or misuse. Operated contrary to the Operating and Installation Instructions 8. Cleaning of equipment 9. Seasoning of griddle plates installation OR created by acts of God PORTABLE EQUIPMENT Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below. These products should be taken to the Service Agency for repair: * The Model 0FD, 0FF Fryer. * The Model TOA Toaster Oven. * The Model J4R, 4 oz. Popcorn Machine. * The Model 8CMA & CMA Cheese Melter. * The Model MC & MC & 8MCP Hot Food Merchandisers. * The Model NCPW & NCPW Nacho Chip/Popcorn Warmer. * All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers. * All Nacho Cheese Warmers except Model WLA Series Nacho Cheese Warmer. * All Condiment Dispensers except the Model HPD & SPD Series Dispenser. * All Specialty Food Warmers except Model 0R, RW Series, and WSA Series. * All QCS/RCS Series Toasters except Model QCS & RCS Series. * All Fast Steamer Models except Direct Connect Series. 0. Voltage conversions. Gas conversions. Pilot light adjustment. Miscellaneous adjustments 4. Thermostat calibration and by-pass adjustment. Resetting of circuit breakers or safety controls or reset buttons. Replacement of bulbs. Replacement of fuses 8. Repair of damage created during transit, delivery, & ALL: * Pop-Up Toasters * Butter Dispensers * Pretzel Merchandisers (Model PD-A Only) * Pastry Display Cabinets * Nacho Chip Merchandisers * Accessories of any kind * Sneeze Guards * Pizza Ovens (Model PO Only) * Heat Lamps * Pumps-Manual Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or our Service Department. In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using. M-449- //4

8 F B R B 4 PILOT LIGHT L L H H H H E P L REAR E P L FRONT D ALL MODELS EXCEPT 0, 0S, 0D, 0SD - 0V MODEL: RG SERIES, INFINITE CONTROLS THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. (AS VIEWED FROM REAR OF PANEL) STAR MANUFACTURING INTERNATIONAL INC. SK4 Rev E //0 DR. STAR MANUFACTURING INTERNATIONAL INC. #0 SUNNEN DRIVE, ST. LOUIS, MO. 4, USA R BN CK. DATE //00 TOLERANCES UNLESS OTHERWISE NOTED FRACTIONS ± /4 DECIMALS ±.00 MATERIAL ~ FINISH ~ MODEL NO. TITLE REVISIONS PART NO. RG SERIES SK WIRE DIAGRAM LTR DATE DESCRIPTION OF CHANGE DR THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. REDRAWN TO NEW STAR TITLE NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. B //00 REDRAWN FOR CLARITY BN C /4/00 UPDATE WIRE CALLOUTS MCT D //00 UPDATE PILOT LIGHTS AND INFINITE CONTROL MCT L L L L H H H H H H H H D P L REAR B D P L FRONT B D P L REAR B D P L FRONT B (AS VIEWED FROM REAR OF PANEL) MODEL 0D & 0SD 0 VOLT (AS VIEWED FROM REAR OF PANEL) MODEL 0 & 0S 0 VOLT 8

9 STAR MANUFACTURING INTERNATIONAL INC. #0 SUNNEN DRIVE, ST. LOUIS, MO. 4, USA DR. CK. DATE DWD //0 TOLERANCES UNLESS OTHERWISE NOTED FRACTIONS ±/4 DECIMALS ±.00 ANGLES ± MATERIAL FINISH - MODEL NO. TITLE - REVISIONS THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. AFV WIRING DIAGRAM AFV-0V LTR DATE DESCRIPTION OF CHANGE A // PART NO. SK9 UPDATE PILOT LIGHTS AND INFINITE CONTROL DR MCT 8 R F (AS VIEWED FROM REAR OF PANEL) H P A 4 L H 4 L REAR R 9 0 A 8 H P L H L F FRONT FRONT REAR F R CONTROL BOARD REAR FRONT 9 4 F NEUTRAL LINE FRONT GRILL R SENSOR POWER BOARD REAR GRILL POWER SWITCH 8 0V AND 40V MODELS BLACK PILOT LIGHT WHITE MOTOR 0V MODELS MODEL: RGE SERIES, ELECTRONIC CONTROLS THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. 9 STAR MANUFACTURING INTERNATIONAL INC. SK9 Rev - 9//00

10 REAR FRONT REAR FRONT REAR GRILL R F 4 SIDE L L H H H H A P L REAR A P L FRONT R F 4 SIDE H L H H L H A P L REAR A P BLACK L FRONT WHITE MODEL: IC/ISC ISLAND INFINITE CONTROL THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. STAR MANUFACTURING INTERNATIONAL INC. SK Rev. A /4/0 R CONTROL BOARD F RIBBON CABLE PILOT LIGHT 9 FRONT GRILL F NEUTRAL LINE 0 SENSOR R SIDE POWER BOARD REAR GRILL R CONTROL BOARD F RIBBON CABLE FRONT GRILL F NEUTRAL LINE SENSOR R SIDE POWER BOARD POWER SWITCH 8 PILOT LIGHT 0V AND 40V MODELS BLACK WHITE MOTOR 0V MODELS MODEL: ICE/ISCE ISLAND ELECTRONIC CONTROL THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. STAR MANUFACTURING INTERNATIONAL INC. SK9 Rev. - /4/00 0

11

12 4 4 4 If your motor looks liks this, replace with motor. replace with kit. (current motor design) (previous motor design, no longer available) NAMEPLATE INFINITE CONTROLS ELECTRONIC CONTROLS Motor Mount Discontinued November 0 MOUNT SPRING BETWEEN FRAME & ARM HOLES REFER TO THE PARTS LIST SPECIFIC TO YOUR MODEL FOR MORE DETAIL INFORMATION. STAR MANUFACTURING INTERNATIONAL INC. SK09 Rev. D //4

13 0 9 4 REFER TO THE PARTS LIST SPECIFIC TO YOUR MODEL FOR MORE DETAIL INFORMATION STAR MANUFACTURING INTERNATIONAL INC. SK0 REV. B --

14 PARTS LIST Model: Grill-Max Roller Grills 0 Series August 04, 04, Rev. H Fig No Part No Qty Description Application A-RG08 0CR/SCR BODY ASSY A-RG0 OC/SC A-Z84 DRIP TRAY 0C/SC A-Z8409 BACK-CHAIN RETAINER SPACER 0C/SC 4 A-Z840 ANGLE CHAIN RETAINER UPPER 0C/SC A-Z9 SIDE PANEL 0C/SC N-Z8 ELEMENT 0V 0 0C-0V N-Z ELEMENT 0V 0 0C-0V A-Z9 CHAIN GUIDE 0C/SC 8 P-Z4 CHAIN 0C/SC PS-RG09 ROLLER ASSY CHROME 0C 9 PS-RG00 ROLLER ASSY POLY 0SC PS-RG049 ROLLER ASSY HI-GRIP 0SC 0 P-Z89 IDLER SPROCKET ALL A-Z80 BUSHING, IDLER ALL A-RG0 IDLER ARM ASSY-CHAIN TENS ALL P-Z804 SPRING ALL 4 P-Z8 ALL /8 MOTOR SHAFTS MOTOR SPROCKET P-Z8 ALL / MOTOR SHAFTS U-Z84 MOTOR GEAR, 0V 0V, w/ / DIA SHAFT PS-RG09 KIT MOTOR, SPROCKET-0 VOLT 0V, w/sprocket & MNT PLATE U-Z8 MOTOR GEAR, 40V 0/40V, w/ / DIA SHAFT PS-RG00 KIT MOTOR, TENSION-0/40V 0/40V, w/sprocket & MNT PLATE A-RG04 MOTOR MOUNTING ASSY 0C/SC A-RG0 CORD ASSY 0V 0C/SC (0V MODELS EXCEPT CSA) E-Z0 CORD SET EUR 0AMP 0C/SC (0V MODELS) 8 K-Y98 0C/SC 0V CORD BUSHING K-Y40 0C/SC 40V 9 E-Y9 CORD INLET IEC0 0 AMP 0C/SC (0V MODELS) 0 A-Z BOTTOM COVER PLATE ALL A-Z944 MOUNTING BRACKET 0C/SC PS-RG09 KIT, CONTROL 0/40 VOLT 0C/SC PS-RG094 KIT, CONTROL 0 VOLT 0C/SC 4 K-Z9 9 SPACERS 0SCE PS-RG0 KIT, SERVICE FNT PROBE REPL 0SCE, mfg before /04 J-Z99 THERMISTOR, FRONT. DIA 0SCE, mfg after /04 J-Z4 THERMISTOR, REAR.X.00 LG 0SCE, 8 PS-RG08 KIT POWER BOARD 0SCE 0 A-Z8 CONTROL PANEL 0C/SC A-RG04 CONTROL PANEL 0SCE M-Z8 0C M-Z84 CONTROL PANEL LABEL 0SC M-Z99 0SCE J-Z9 PILOT LIGHT RED 0C/SC (0V & 40V MODELS) J-Z PILOT LIGHT YELLOW 0C/SC (0V MODELS) E-Z88 SWITCH-RED LIGHTED 0V & 40V MODELS E-Z SWITCH-YELLOW LIGHTED 0V MODELS 4 R-Z84 KNOB W/SET SCREW 0C/SC A-Z09 4 PANEL-INSULATOR 0C/SC I-Z98 O-RING SILICONE, TUBE SEAL 0C/SC, manuf. after 8/0 P-Z4 TUBE SEAL, SOLID 0C/SC, manuf. before 8/0 I-Z O-RING SEAL 0C/SC 8 P-Z4 TUBE GUIDE 0C/SC 9 R-Z84 4 LEGS 0C/SC 40 K-Z89 4 ANTI SHORT BUSHING ALL 4 A-Z0 ELEMENT RETAINER - UPPER 0C/SC A-Z89 ELEMENT MOUNT UPPER 0SCE 4 A-Z ELEMENT RETAINER - LOWER 0C/SC A-RG00 ASSY, ELEM THERMISTOR MT CT 0SCE 4 P-Y9 SNAP BUTTON Goes with No A-0RGMD optional MERCHANDISING DOOR OPTIONAL ASSESSORY 8 A-Z44 TONGS ALL 4 V-Z84 THERMAL, BLOCK 0SCE NI E-Z9 WIRE SET-0V MODELS NI E-Z80 WIRE SET-0V MODELS 0C/SC NI PS-Z08 -- TUBE ASSEMBLY SLEEVE M-Z84: Grill-Max Rollergrill, Star Manufacturing International

15 M-Z84: Grill-Max Rollergrill, Star Manufacturing International PARTS LIST Model: Grill-Max Roller Grills 0 Series Fig No Part No Qty Description Application A-RG0 0C/SC/STE A-RG00 0CBB/SCBB A-RG08 0CBBC/SCBBC BODY ASSY A-RG08 0CF/SCF A-RG0 0CR/SCR A-RG0 0CRBB/SCRBB A-Z8 DRIP TRAY 0C/SC A-Z8409 BACK-CHAIN RETAINER SPACER 0C/SC 4 A-Z840 ANGLE CHAIN RETAINER UPPER 0C/SC A-Z9 0C/SC SIDE PANEL A-Z40 0CF/SCF N-Z8 ELEMENT 0V 0/4 0C/SC/STE-0V N-Z94 ELEMENT 0V 0/4 0C/SC-0V A-Z9 CHAIN GUIDE 0C/SC 8 P-Z4 0C/SC CHAIN P-Z84 0CF/SCF PS-RG0 ROLLER ASSY CHROME 0C 9 0SC before serial no. C0040 PS-RG08 ROLLER ASSY POLY 0SCE before serial no. C004 0SC serial no or after. C0040 A-RG4 ROLLER ASSY HI-GRIP 0SCE serial no or after. C0040 A-RG0 RLR ASY STALTEK 0ST/4ST 0STE 0 P-Z89 IDLER SPROCKET ALL A-Z80 BUSHING, IDLER ALL A-RG0 IDLER ARM ASSY-CHAIN TENS ALL P-Z804 SPRING ALL 4 P-Z8 ALL /8 MOTOR SHAFTS MOTOR SPROCKET P-Z8 ALL / MOTOR SHAFTS U-Z84 MOTOR GEAR, 0V 0V, w/ / DIA SHAFT PS-RG09 KIT, MOTOR, 0V 0V, w/sprocket & MNT PLATE PS-RG0 KIT, MOTOR, -0V FLAT 0V, FLAT w/sprocket & MNT PLATE U-Z8 MOTOR GEAR, 40V 0/40V, UNITS w/ / DIA SHAFT PS-RG00 KIT, MOTOR, -0/40V 0/40V, UNITS w/sprocket & MNT PLATE PS-RG0 KIT, MOTOR, -0/40V FLAT 0/40V, FLAT UNITS w/sprocket & MNT PLATE A-RG0 0C/SC/STE MOTOR MOUNTING ASSY A-RG0 0CF/SCF A-RG0 CORD ASSY 0V 0C/SC/STE (0V MODELS EXCEPT CSA) E-Z0 CORD SET EUR 0AMP 0C/SC (0V MODELS) 8 K-Y40 0C/SC 40V CORD BUSHING K-Y98 0C/SC/STE 0V, 0CSA 9 E-Y9 CORD INLET IEC0 0 AMP 0C/SC (0V MODELS) 0 A-Z BOTTOM COVER PLATE ALL P-Z40 HOLE PLUG ALL EXCEPT CLEAR BUNBOX MODELS A-Z944 MOUNTING BRACKET 0C/SC A-RG44 MOUNTING BRACKET ASSY 0CE/SCE/STE PS-RG09 KIT, CONTROL 0/40 VOLT 0C/SC PS-RG094 KIT, CONTROL 0 VOLT 0C/SC 4 K-Z9 9 SPACERS 0CE/SCE PS-RG0 KIT, SERVICE FNT PROBE REPL 0CE/SCE, mfg before /04 J-Z99 THERMISTOR, FRONT. DIA 0CE/SCE/STE, mfg after /04 J-Z4 THERMISTOR, REAR.X.00 LG 0CE/SCE 8 PS-RG08 KIT, CONTROL, ELECTRONIC 0CE/SCE, mfg before /00 E-Z8 ELECTRONIC CONTROL RG 0CE/SCE/STE, mfg after /00 A-Z 0C/SC 0 A-Z 0CBB/SCBB CONTROL PANEL A-RG09 0CE/SCE/STE A-RG0 0CBBE/SCBBE August 04, 04, Rev. H

16 PARTS LIST Model: Grill-Max Roller Grills 0 Series Fig No Part No Qty Description Application M-Z8 0C M-Z8 0CBB M-Z88 0CBBE M-Z8 0CE CONTROL PANEL LABEL M-Z89 0SC M-Z80 0SCBB M-Z8 0SCBBE M-Z8 0SCE/STE J-Z9 PILOT LIGHT RED 0C/SC (0V & 40V MODELS) J-Z PILOT LIGHT YELLOW 0C/SC (0V MODELS) J-Z9 PILOT LIGHT RED 0CE/SCE/STE (0V & 40V MODELS) J-Z PILOT LIGHT YELLOW 0CE/SCE (0V MODELS) E-Z88 SWITCH-RED LIGHTED 0V & 40V MODELS E-Z SWITCH-YELLOW LIGHTED 0V MODELS 4 R-Z84 KNOB W/SET SCREW 0C/SC A-Z09 4 PANEL-INSULATOR 0C/SC I-Z98 O-RING SILICONE, TUBE SEAL 0C/SC serial no. or after C0040 P-Z4 TUBE SEAL, SOLID 0C/SC, before serial no. C0040 I-Z98 O-RING SILICONE, TUBE SEAL 0CE/SCE/STE, serial no. or after C004 P-Z4 TUBE SEAL, SOLID 0CE/SCE/STE, before serial no. C004 I-Z ORING SEAL, TUBE GUIDE 0C/SC 8 P-Z4 TUBE GUIDE 0C/SC 9 R-Z84 4 LEGS 0C/SC 40 K-Z89 4 ANTI SHORT BUSHING ALL A-Z0 ELEMENT RETAINER - UPPER 0C/SC 4 A-RG00 ELEMENT RTN & TERM MT. CLIPS 0CE/SCE made between 0/0 to /04 A-Z89 ELMENT MOUNT UPPER, COUNT 0CE/SCE/STE 4 A-Z ELEMENT RETAINER - LOWER 0C/SC A-Z94 ELEMENT MT., LOWER CT 0CE/SCE 4 P-Y9 SNAP BUTTON Goes with No A-0RGMD MERCHANDISING DOOR OPTIONAL ASSESSORY 4 P-Z098 GREASE SEAL 0CDV/SCDV 4 A-Z8 GRILL DIVIDER 0CDV/SCDV 4 D-Z898 PAN / X 4 DEEP 0CBB/SCBB 48 P-Z0 4 DRAWER ROLLER W/SCREW ALL BUNBOX (CBB/SCBB) MODELS 49 A-RG00 DRAWER ASSY 0CBB/SCBB 0 A-RG009 DRAWER FRONT ASSEMBLY 0CBB/SCBB M-Z DRAWER LABEL 0CBB/SCBB A-Z4 SHAFT 0CBBC/SCBBC A-Z40 DOOR BRACKET 0CBBC/SCBBC 4 C-Z480 RETAINER RING 0CBBC/SCBBC A-Z4 SPRING MOUNT BRACKET 0CBBC/SCBBC A-Z4 DOOR ARM 0CBBC/SCBBC P-Z48 EXTENSION SPRING 0CBBC/SCBBC 8 A-Z44 TONGS ALL 9 A-Z4 RETAINER PIN 0CBBC/SCBBC 0 P-Z4 COMPRESSION SPRING 0CBBC/SCBBC A-Z4 SHOULDER SCREW 0CBBC/SCBBC A-RG0 FRONT DOOR A-RG0 FRONT DOOR-GLASS 4 V-Z84 THERMAL, BLOCK 0SCE/STE NI E-Z80 WIRE SET 0C/SC (INFINITE CONTROLS) NI E-Z844 WIRE SET 0CE/SCE/STE (ELECTRONIC CONTROLS) NI E-Z ELEMENT WIRE, FRONT 0CE/SCE/STE (ELECTRONIC CONTROLS) NI PS-Z08 -- TUBE ASSEMBLY SLEEVE August 04, 04, Rev. H M-Z84: Grill-Max Rollergrill, Star Manufacturing International

17 M-Z84: Grill-Max Rollergrill, Star Manufacturing International PARTS LIST Model: Grill-Max Roller Grills 4 Series Fig No Part No Qty Description Application August 04, 04, Rev. H A-RG4 4C/SC A-RG4 4CBB/SCBB BODY ASSY A-RG44 4CR/SCR A-RG4 4CRBB/SCRBB A-Z8 DRIP TRAY 4C/SC A-Z84 BACK-CHAIN RETAINER SPACER 4C/SC 4 A-Z84 ANGLE CHAIN RETAINER UPPER 4C/SC A-Z 4C/SC SIDE PANEL A-Z4 4CF/SCF N-Z8 ELEMENT 0V 0/4 4C/SC-0V N-Z94 ELEMENT 0V 0/4 4C/SC-0V A-Z CHAIN GUIDE 4C/SC 8 P-Z 4C/SC CHAIN P-Z 4CF/SCF PS-RG0 ROLLER ASSY CHROME 4C 9 A-RG4 ROLLER ASSY HI-GRIP 0S/4S 4SC, serial no. or after C40 PS-RG08 ROLLER ASSY POLY 4SC, serial no. or before C40 A-RG0 RLR ASY STALTEK 0ST / 4ST 4STBDE-0V 0 P-Z89 IDLER SPROCKET ALL A-Z80 BUSHING, IDLER ALL A-RG0 IDLER ARM ASSY-CHAIN TENS ALL P-Z804 SPRING ALL 4 P-Z8 ALL /8 MOTOR SHAFTS MOTOR SPROCKET P-Z8 ALL / MOTOR SHAFTS U-Z84 MOTOR GEAR, 0V 0V, w/ / DIA SHAFT PS-RG09 KIT MOTOR, SPROCKET-0V 0V, w/sprocket & MNT PLATE PS-RG0 KIT MOTOR, SPROCKET-0V FLAT 0V, FLAT w/sprocket & MNT PLATE U-Z8 MOTOR GEAR, 40V 0/40V, UNITS w/ / DIA SHAFT PS-RG00 KIT MOTOR, SPROCKET-0/40V 0/40V, UNITS w/sprocket & MNT PLATE PS-RG0 KIT MTR, SPROCKET-0/40V FLAT 0/40V, FLAT UNITS w/sprocket & MNT PLATE A-RG0 4C/SC MOTOR MOUNTING ASSY A-RG0 4CF/SCF A-RG0 CORD ASSY 0V 4C/SC (0V MODELS EXCEPT CSA) E-Z0 CORD SET EUR 0AMP 4C/SC (0V MODELS) A-RG04 CORD ASSY 0V 4C/SC (0V CSA MODELS) K-Y40 4C/SC 40V MODELS 8 K-Y98 CORD BUSHING 4C/SC 0V K-Y98 4CSA 9 E-Y9 CORD INLET IEC0 0 AMP 4C/SC (0V MODELS) 0 A-Z BOTTOM COVER PLATE ALL P-Z40 HOLE PLUG ALL EXCEPT CLEAR BUNBOX MODELS A-Z944 MOUNTING BRACKET 4C/SC A-RG44 MOUNTING BRACKET ASSY 4CE/SCE PS-RG09 KIT, CONTROL 0/40 VOLT 4C/SC PS-RG094 KIT, CONTROL 0 VOLT 4C/SC 4 K-Z9 9 SPACERS 4CE/SCE PS-RG0 KIT, SERVICE FNT PROBE REPL 4CE/SCE, mfg before /04 J-Z99 THERMISTOR, FRONT. DIA 4CE/SCE, mfg after /04 J-Z4 THERMISTOR, REAR. DIA X LONG 4CE/SCE 8 PS-RG08 KIT, E-Z REPLACMENT 4CE/SCE, mfg before /00 E-Z8 ELECTRONIC CONTROL RG 4CE/SCE, mfg after /00 9 PS-RG09 CONTROL BOARD 4CE/SCE

18 PARTS LIST Model: Grill-Max Roller Grills 4 Series Fig No Part No Qty Description Application A-Z 4C/SC 0 A-Z 4CBB/SCBB CONTROL PANEL A-RG09 4CE/SCE A-RG0 4CBBE/SCBBE M-Z8 4C M-Z8 4CBB M-Z8 CONTROL PANEL LABEL 4CE M-Z89 4SC M-Z80 4SCBB J-Z9 PILOT LIGHT RED 4C/SC (0V & 40V MODELS) J-Z PILOT LIGHT YELLOW 4C/SC (0V MODELS) J-Z9 PILOT LIGHT RED 4CE/SCE (0V & 40V MODELS) J-Z PILOT LIGHT YELLOW 4CE/SCE (0V MODELS) E-Z88 SWITCH-RED LIGHTED 0V & 40V MODELS E-Z SWITCH-YELLOW LIGHTED 0V MODELS 4 R-Z84 KNOB W/SET SCREW 4C/SC A-Z0 4 PANEL-INSULATOR 4C/SC I-Z98 O-RING SILICONE, TUBE SEAL 4C/SC, serial no. or after C40 P-Z4 TUBE SEAL, SOLID 4C/SC, serial no. or before C40 I-Z ORING SEAL 4C/SC 8 P-Z4 TUBE GUIDE 4C/SC 9 R-Z84 4 LEGS 4C/SC 40 K-Z89 4 ANTI SHORT BUSHING ALL A-Z9 ELEMENT RETAINER - UPPER 4C/SC mfg between /004 to 0/0 4 A-Z9 ELEMENT MT,UPPER CT 4C/SC mfg. after 0/0 A-Z88 ELEMENT MOUNT UPPER 4CE/4SCE mfg. after /04 4 A-Z9 ELEMENT MT LOWER CT 4C/SC A-RG ELEMENT RET & THERM MT, CLIPS 4CE/SCE 0/0 to /04 4 P-Z098 GREASE SEAL 4CDV/SCDV 4 A-Z GRILL DIVIDER 4CDV/SCDV 4 D-Z898 PAN / X 4 DEEP 4CBB/SCBB 48 P-Z0 4 DRAWER ROLLER W/SCREW ALL BUNBOX (CBB/SCBB) MODELS 49 A-RG00 DRAWER ASSY 4CBB/SCBB 0 A-RG009 DRAWER FRONT ASSEMBLY 4CBB/SCBB M-Z DRAWER LABEL 4CBB/SCBB 8 A-Z44 TONGS ALL NI E-Z80 WIRE SET 4C/SC (INFINITE CONTROLS) NI E-Z844 WIRE SET 4CE/SCE (ELECTRONIC CONTROLS) NI PS-Z08 -- TUBE ASSEMBLY SLEEVE August 04, 04, Rev. H M-Z84: Grill-Max Rollergrill, Star Manufacturing International

19 M-Z84: Grill-Max Rollergrill, Star Manufacturing International PARTS LIST Model: Grill-Max Roller Grills 0 Series March, 0, Rev. H Fig No. Part No Qty Description Application A-Z0 DRIP TRAY 0C/SC A A-Z4 DRIP TRAY 0SC-ST, 0SCE-ST, 0SC-STS B A-RG0 DRIP TRAY ASSY 0SC-ST, 0SCE-ST, 0SC-STS, 0SCEQT A-Z8409 BACK-CHAIN RETAINER SPACER 0C/SC 4 A-Z840 ANGLE CHAIN RETAINER UPPER 0C/SC A-Z9 0C/SC SIDE PANEL A-Z40 0CF/SCF N-Z9 ELEMENT 0V 0 0C/SC-0V N-Z9 ELEMENT 0V 0/ 0C/SC-0V A-Z9 CHAIN GUIDE 0C/SC 8 P-Z4 CHAIN 0C/SC P-Z84 CHAIN 0CF/SCF PS-RG ROLLER ASSY CHROME 0C A-RG0 ROLLER ASSY HI-GRIP 0SC serial no. or after C PS-RG ROLLER ASSY POLY 0SC serial no. or before C004, 0SCFESW A-RG009 RLLR ASSY., J COAT, 0/ 0SCEQT A-RG RLR ASY STALTECK 0ST / ST 0STE, 0STBD, 0STBDE 0 P-Z89 IDLER SPROCKET ALL A-Z80 BUSHING, IDLER ALL A-RG0 IDLER ARM ASSY-CHAIN TENS ALL P-Z804 SPRING ALL 4 P-Z8 ALL /8 MOTOR SHAFTS MOTOR SPROCKET P-Z8 ALL / MOTOR SHAFTS U-Z84 MOTOR GEAR, 0V 0V, w/ / DIA SHAFT PS-RG09 KIT MOTOR, SPROCKET-0V 0V, w/sprocket & MNT PLATE PS-RG0 KIT MOTOR, SPROCKET-0V FLAT 0V, FLAT w/sprocket & MNT PLATE U-Z8 MOTOR GEAR, 40V 0/40V, UNITS w/ / DIA SHAFT PS-RG00 KIT MOTOR, SPROCKET-0/40V 0/40V, UNITS w/sprocket & MNT PLATE PS-RG0 KIT MTR, SPROCKET-0/40V FLAT 0/40V, FLAT UNITS w/sprocket & MNT PLATE A-RG0 MOTOR MOUNTING ASSY 0C/SC A-RG0 MOTOR MOUNTING ASSY 0CF/SCF A-RG0 CORD ASSY 0V 0C/SC (0V MODELS EXCEPT CSA), 0SCFESW-0V A-RG04 CORD SET ASSY 0V CSA CSA UNITS E-Z0 CORD SET EUR 0AMP 0C/SC (0V MODELS) K-Y40 0C/SC 40V 8 K-Y98 CORD BUSHING 0C/SC 0V K-Y98 0CSA, 0C 9 E-Y9 CORD INLET IEC0 0 AMP 0C/SC (0V MODELS) 0 A-Z BOTTOM COVER PLATE ALL P-Z40 HOLE PLUG ALL EXCEPT CLEAR BUNBOX A-Z944 MOUNTING BRACKET 0C/SC A-RG44 MOUNTING BRACKET ASSY 0CE/SC PS-RG09 KIT, CONTROL 0/40 VOLT 0C/SC PS-RG094 KIT, CONTROL 0 VOLT 0C/SC 4 K-Z9 9 SPACERS 0CE/SCE PS-RG0 KIT, SERVICE FNT PROBE REPL 0CE/SCE, mfg before /04 J-Z99 THERMISTOR, FRONT. DIA 0CE/SCE, mfg after /04 J-Z4 THERMISTOR, REAR.X.00 LG 0CE/SCE 8 PS-RG08 KIT, E-Z REPLACMENT 0CE/SCE, mfg before /00 E-Z8 ELECTRONIC CONTROL RG 0CE/SCE, mfg after /00 9 PS-RG09 CONTROL BOARD 0CE/SCE A-Z 0C/SC 0 A-Z80 0CBB/SCBB CONTROL PANEL A-RG0 0CBBE/SCBBE A-RG 0CE/SCE

20 PARTS LIST March, 0, Rev. H Model: Grill-Max Roller Grills 0 Series M-Z8 0C M-Z84 0CBB M-Z8 0CBBE M-Z8 0CE M-Z8 CONTROL PANEL LABEL 0SC M-Z88 0SCBB M-Z840 0SCBBE M-Z89 0SCE M-Z004 0SCE-CT (FRENCH DECAL) J-Z9 PILOT LIGHT RED 0C/SC (0V & 40V MODELS) J-Z PILOT LIGHT YELLOW 0C/SC (0V MODELS) J-Z9 PILOT LIGHT RED 0CE/SC (0V & 40V MODELS) J-Z PILOT LIGHT YELLOW 0CE/SC (0V MODELS) E-Z88 SWITCH-RED LIGHTED 0V & 40V MODELS E-Z SWITCH-YELLOW LIGHTED 0V MODELS 4 R-Z84 KNOB W/SET SCREW 0C/SC A-Z09 4 PANEL-INSULATOR 0C/SC I-Z98 O-RING SILICONE, TUBE SEAL 0C/SC serial no. or after C0048 P-Z4 TUBE SEAL, SOLID 0C/SC serial no. or before C004 I-Z ORING SEAL 0C/SC 8 P-Z4 TUBE GUIDE 0C/SC 9 R-Z84 4 LEGS 0C/SC 40 K-Z89 4 ANTI SHORT BUSHING ALL A-Z0 ELEMENT RETAINER - UPPER 0C/SC 4 A-RG00 ELEMENT RTN & TERM MT. CLIPS 0CE/SCE made between 0/0 to /04 A-Z89 ELEMENT MOUNT UPPER, COUNT 0CE/SCE made after /04 4 A-Z94 ELEMENT MT., LOWER CT 0CE/SCE A-Z ELEMENT RETAINER - LOWER 0C/SC 4 P-Y9 SNAP BUTTON 0SCBDESW0, 0SCESW-0V, 0SCFE-0C, 0SCESW A-0RGMD optional MERCHANDISING DOOR OPTIONAL ASSESSORY 4 P-Z098 GREASE SEAL 0CDV/SCDV 4 A-Z8 GRILL DIVIDER 0CDV/SCDV 4 D-Z899 PAN FULL X 4 DEEP 0CBB/SCBB 48 P-Z0 4 DRAWER ROLLER W/SCREW ALL BUNBOX (CBB/SCBB) MODELS 49 A-RG0 DRAWER ASSY 0CBB/SCBB 0 A-RG004 DRAWER FRONT ASSEMBLY 0CBB/SCBB M-Z80 DRAWER LABEL 0CBB/SCBB A-Z4 SHAFT 0CBBC/SCBBC A-Z40 DOOR BRACKET 0CBBC/SCBBC 4 C-Z480 RETAINER RING 0CBBC/SCBBC A-Z4 SPRING MOUNT BRACKET 0CBBC/SCBBC A-Z4 DOOR ARM 0CBBC/SCBBC P-Z48 EXTENSION SPRING 0CBBC/SCBBC 8 A-Z44 ALL TONGS P-Z084 0SCFESW 9 A-Z4 RETAINER PIN 0CBBC/SCBBC 0 P-Z4 COMPRESSION SPRING 0CBBC/SCBBC A-Z4 SHOULDER SCREW 0CBBC/SCBBC A-RG0 FRONT DOOR-GLASS 0CBBC/SCBBC 4 V-Z84 THERMAL, BLOCK 0CE/SCE A-TH BODY BACK ASSY, HOLDER CERTAIN MODELS A-TH00 - BODY ASSY, HOLDER CERTAIN MODELS P-Z40 - SNAP HOOK CERTAIN MODELS 8 B-Z49 - CABLE ASSY CERTAIN MODELS NI E-Z80 WIRE SET 0C/SC (INFINITE CONTROLS) NI E-Z844 WIRE SET 0CE/SCE (ELECTRONIC CONTROLS) NI PS-Z08 -- TUBE ASSEMBLY SLEEVE NI M-Z08 LABEL, CAUTION HOT IN FRENCH 0SCE-CT-0 M-Z84: Grill-Max Rollergrill, Star Manufacturing International

21 PARTS LIST March, 0, Rev. H M-Z84: Grill-Max Rollergrill, Star Manufacturing International Model: Grill-Max Roller Grills Series Fig No. Part No Qty Description Application A-RG4 C/SC A-RG4 CR/SCR A-RG4 CF/SCF A-RG48 BODY ASSY CBB/SCBB A-RG49 CRBB/SCRBB A-RG CFV A-RG80 SCESW A-Z0 DRIP TRAY C/SC A-Z84 BACK-CHAIN RETAINER SPACER C/SC 4 A-Z84 ANGLE CHAIN RETAINER UPPER C/SC A-Z SIDE PANEL C/SC A-Z4 SIDE PANEL CF/SCF N-Z9 ELEMENT 0V 0/ C/SC-0V N-Z98 ELEMENT 0V 0 W C/SC-0V A-Z CHAIN GUIDE C/SC 8 P-Z CHAIN C/SC P-Z CHAIN CF/SCF A-RG0 ROLLER ASY HIGRIP 0S/S SCE 9 PS-RG ROLLER ASSY CHROME C PS-RG ROLLER ASSY POLY SC 0 A-Z4 IDLER ALL A-Z80 BUSHING, IDLER ALL K-Z89 ANTI SHORT BUSHING ALL A-RG0 IDLER ARM ASSY-CHAIN TENS ALL P-Z804 SPRING ALL 4 P-Z8 ALL /8 MOTOR SHAFTS MOTOR SPROCKET P-Z8 ALL / MOTOR SHAFTS U-Z84 MOTOR GEAR, 0V 0V, w/ / DIA SHAFT PS-RG09 KIT MOTOR, SPROCKET-0V 0V, w/sprocket & MNT PLATE U-Z8 MOTOR GEAR, 40V 0/40V, UNITS w/ / DIA SHAFT PS-RG00 KIT MOTOR, SPROCKET-0/40V 0/40V, UNITS w/sprocket & MNT PLATE A-RG0 MOTOR MOUNTING ASSY C/SC A-RG040 MOTOR MOUNTING ASSY CF/SCF E-Y9 CORD SET EUR AMP C/SC (0V MODELS) A-RG04 CORD SER 40V W/TERMINALS C/SC (40V MODELS) A-RG04 CORD ASSY 0V C/SC (0V MODELS) 8 K-Y40 CORD BUSHING C/SC (0V & 40V MODELS) 9 E-Y9 CORD INLET IEC0 AMP C/SC (0V MODELS) 0 A-Z BOTTOM COVER PLATE ALL P-Z40 HOLE PLUG ALL EXCEPT CLEAR BUNBOX MODELS (CBBC, SCBBC) A-RG44 MOUNTING BRACKET ASSY CE/SCE A-Z4 MOUNTING BRACKET C/SC PS-RG09 KIT, CONTROL 0/40 VOLT C/SC PS-RG094 KIT, CONTROL 0 VOLT C/SC 4 K-Z9 9 SPACERS CE/SCE PS-RG0 KIT, SERVICE FNT PROBE REPL CE/SCE, mfg before /04 J-Z99 THERMISTOR, FRONT. DIA CE/SCE, mfg after /04 J-Z4 THERMISTOR, REAR. DIA X LONG CE/SCE PS-RG08 KIT, E-Z REPLACMENT CE/SCE, mfg before /00 8 E-Z8 ELECTRONIC CONTROL RG 0V CE/SCE, mfg after /00 A-Z40 ELECTRONIC CONTROL RG 40V CE/SCE, mfg after /00

22 PARTS LIST March, 0, Rev. H Model: Grill-Max Roller Grills Series Fig No. Part No Qty Description Application A-RG0 CE/SCE 0 A-RG CE/SCE, BUN BOX CONTROL PANEL A-Z C/SC A-Z80 CBB/SCBB M-Z8 C M-Z84 CBB M-Z8 CE M-Z8 CBBE CONTROL PANEL LABEL M-Z8 SC M-Z88 SCBB M-Z89 SCE M-Z840 SCBBE J-Z9 PILOT LIGHT RED CE/SCE (0V & 40V MODELS) PILOT LIGHT RED C/SC (0V & 40V MODELS) J-Z PILOT LIGHT YELLOW CE/SCE (0V MODELS) PILOT LIGHT YELLOW C/SC (0V MODELS) E-Z88 SWITCH-RED LIGHTED 0V & 40V MODELS E-Z SWITCH-YELLOW LIGHTED 0V MODELS 4 R-Z84 KNOB W/SET SCREW C/SC A-Z0 4 PANEL-INSULATOR C/SC P-Z4 TUBE SEAL, SOLID C/SC I-Z ORING SEAL C/SC 8 P-Z4 TUBE GUIDE C/SC 9 R-Y09 4 LEGS 4 C/SC 40 K-Z89 4 ANTI SHORT BUSHING ALL A-Z9 ELEMENT RETAINER - UPPER C/SC mfg between /004 to 0/0 4 A-Z9 ELEMENT MT,UPPER CT C/SC mfg. after 0/0 A-Z88 ELEMENT MT,UPPER CT CE/SCE mfg. after /04 4 A-RG ELEMENT RET & THERM MT, CLIPS CE/SCE 0/0 to /04 A-Z9 ELEMENT MT LOWER CT 4 P-Y9 SNAP BUTTON SCF-SA, SCFE-SA 44 A-RG CONTROL PANEL COVER SCF-SA, SCFE-SA, SCESW 4 P-Z098 GREASE SEAL CDV/SCDV 4 A-Z GRILL DIVIDER CDV/SCDV 4 D-Z899 PAN FULL X 4 DEEP CBB/SCBB 48 P-Z0 4 DRAWER ROLLER W/SCREW ALL BUNBOX (CBB/SCBB) MODELS 49 A-RG0 DRAWER ASSY CBB/SCBB 0 A-RG004 DRAWER FRONT ASSEMBLY CBB/SCBB M-Z80 DRAWER LABEL CBB/SCBB 8 A-Z44 TONGS ALL 4 V-Z84 THERMAL, BLOCK CE/SCE A-TH BODY BACK ASSY, HOLDER CERTAIN MODELS A-TH00 - BODY ASSY, HOLDER CERTAIN MODELS P-Z40 - SNAP HOOK CERTAIN MODELS 8 B-Z49 - CABLE ASSY CERTAIN MODELS NI E-Z80 WIRE SET C/SC (INFINITE CONTROLS) NI E-Z844 WIRE SET CE/SCE (ELECTRONIC CONTROLS) NI PS-RG99 AR CHAIN REPAIR KIT FLAT FLAT ROLLER CHAIN REP SER. KIT M-Z84: Grill-Max Rollergrill, Star Manufacturing International

23

24 Non Switch Side INFINITE CONTROLS 4 ELECTRONIC CONTROLS NAMEPLATE MOUNT SPRING BETWEEN FRAME & ARM HOLES REFER TO THE PARTS LIST SPECIFIC TO YOUR MODEL FOR MORE DETAIL INFORMATION. STAR MANUFACTURING INTERNATIONAL INC. SK -0-0

25 PARTS LIST September, 008 Rev. H MODEL Grill-Max Island Roller Grills 4IC Series Key Number Part Number Number Per Unit Description & Model Designation A-RG098 BODY ASSY 4IC/ISC A-Z8 DRIP TRAY A-RG00 DRIP PAN ASSY 4IC/ISC 4 A-Z880 SIDE PANEL IC/ISC A-Z90 9 ELEMENT 90W 0V 4IC/ISC A-Z88 CHAIN GUIDE A-Z880 CHAIN GUIDE 8 A-Z88 CHAIN RETAINER-ANGLE 9 A-Z88 CHAIN RETAINER-FLAT 0 P-Z89 ROLLER CHAIN A-RG00 9 ROLLER ASSY CHROME 4IC A-RG00 9 ROLLER ASSY POLY 4ISC P-Z89 4 IDLER SPROCKET ASSY A-Z80 4 BUSHING IDLER 4 K-804 BUSHING HEYCO K-Y40 BUSHING SR - ICE/ISCE A-RG04 ARM ASSY-CHAIN TENSIONER P-Z804 EXTENSION SPRING 8 P-Z8 MOTOR SPROCKET 9 K-Z89 BUSHING IC/ISC K-Z89 4 BUSHING ICE/ISCE 0 A-RG04 MOTOR MOUNTING ASSY U-Z48 GEAR MOTOR, 0V A-RG0 CORD SET 0V W/TERMINALS J-Z9 PILOT LIGHT IC/ISC J-Z9 PILOT LIGHT ICE/ISCE 4 A-RG44 INSIDE MOUNTING ASSY ICE/ISCE A-Z944 INSIDE MOUNTING BRACKET 4IC/ISC J-Z9 4 INFINITE CONTROLS 0V IC/ISC K-Z9 8 SPACER ICE/ISCE E-Z- RIBBON CONNECTOR ICE/ISCE 8 E-Z- SENSOR FRONT ICE/ISCE 9 E-Z-4 SENSOR REAR ICE/ISCE 0 E-Z- POWER BOARD ICE/ISCE PS-RG09 CONTROL BOARD ICE/ISCE A-RG09 CONTROL PANEL ICE/ISCE A-Z CONTROL PANEL 4IC/ISC M-Z8 LABEL-CNTRL PNL-SWITCH SIDE 4IC M-Z8 LABEL-CNTRL PNL-SWITCH SIDE 4ICE M-Z89 LABEL-CONTROL PANEL-SWITCH SIDE 4ISC M-Z8 LABEL-CNTRL PNL-SWITCH SIDE 4ISCE M-Z89 LABEL CNTTROL PNL-NON SWITCH SIDE 4ISC M-Z9 CONTROL PNL LABEL-NON SWITCH SIDE 4IC/ISC M-Z94 CONTROL PNL LABEL-NON SWITCH SIDE 4ICE/ISCE M-Z9 CNTRL PNL LABEL - NON SWITCH SIDE 4ISCE 4 E-Z88 SWITCH-LIGHTED R-Z84 4 KNOB-CONTROL IC/ISC A-Z09 4 PANEL INSULATOR P-Z4 8 TUBE SEAL, SOLID 8 I-Z 8 O-RING SEAL 9 P-Z4 8 TUBE GUIDE 40 R-Z84 4 FOOT-ROLLER GRILLS 4IC/ISC IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. PAGE OF Star Manufacturing International, Inc.

26 PARTS LIST September, 008 Rev. H MODEL Grill-Max Island Roller Grills 4IC Series Key Number Part Number Number Per Unit Description & Model Designation 4 P-Z40 PLUG-HEYCO / DIA. IC/ISC P-Z40 4 PLUG-HEYCO / DIA. ICE/ISCE 4 A-RG0 ELEMENT RETAINER ASSY LOWER ICE/ISCE A-Z8808 ELEMENT RETAINER-LOWER IC/ISC 4 A-RG0 ELEMENT RETAINER ASSY LOWER ICE/ISCE A-Z8809 ELEMENT RETAINER-LOWER IC/ISC 44 A-Z888 ELEMENT RETAINER-UPPER 4 A-Z889 ELEMENT RETAINER-UPPER 4 A-Z88 COVER PLATE 4 A-Z44 TONGS-PLASTIC NI E-Z89 WIRE SET IC/ISC NI E-Z989 WIRE KIT ICE/ISCE IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. PAGE OF Star Manufacturing International, Inc.

27 PARTS LIST September, 008 Rev. H MODEL Grill-Max Island Roller Grills 90IC/ISC Series Key Number Part Number Number Per Unit Description & Model Designation A-RG BODY ASSY 90IC/ISC A-Z988 DRIP TRAY 90IC/ISC A-RG DRIP PAN ASSY 90IC/ISC 4 A-Z880 SIDE PANEL IC/ISC N-Z9 9 ELEMENT W, 0V 90IC/ISC A-Z88 CHAIN GUIDE A-Z880 CHAIN GUIDE 8 A-Z88 CHAIN RETAINER-ANGLE 9 A-Z88 CHAIN RETAINER-FLAT 0 P-Z89 ROLLER CHAIN A-RG0 9 ROLLER ASSY CHROME 90IC A-RG0 9 ROLLER ASSY POLY 90ISC P-Z89 4 IDLER SPROCKET ASSY A-Z80 4 BUSHING IDLER 4 K-804 BUSHING HEYCO K-Y40 BUSHING SR - ICE/ISCE A-RG04 ARM ASSY-CHAIN TENSIONER P-Z804 EXTENSION SPRING 8 P-Z8 MOTOR SPROCKET 9 K-Z89 8 BUSHING 90IC/ISC 9 K-Z89 4 BUSHING ICE/ISCE 0 A-RG04 MOTOR MOUNTING ASSY U-Z48 GEAR MOTOR, 40V A-RG04 CORD SET 40V W/TERMINALS 90ICE A-RG9 CORD W/TERMINALS 40V, -P 90IC J-Z9 PILOT LIGHT IC/ISC J-Z9 PILOT LIGHT ICE/ISCE 4 A-RG44 INSIDE MOUNTING ASSY ICE/ISCE A-Z4 INSIDE MOUNTING BRACKET 90IC/ISC J-Z9 4 INFINITE CONTROLS 40V IC/ISC K-Z9 8 SPACER ICE/ISCE E-Z- RIBBON CONNECTOR ICE/ISCE 8 E-Z- SENSOR FRONT ICE/ISCE 9 E-Z-4 SENSOR REAR ICE/ISCE 0 E-Z- POWER BOARD ICE/ISCE PS-RG09 CONTROL BOARD ICE/ISCE A-RG0 CONTROL PANEL 90ICE/ISCE A-Z CONTROL PANEL 90IC/ISC M-Z8 LABEL-CONTROL PNL-SWITCH SIDE 90IC M-Z8 LABEL-CONTROL PANEL-SWITCH SIDE 90ICE M-Z8 LABEL-CNTRL PNL-SWITCH SIDE 90ISC M-Z89 LABEL-CNTRL PNL-SWITCH SIDE 90ISCE M-Z898 LABEL-CNTRL PNL-NON-SWITCH SIDE 90ISC M-Z9 CONTROL PNL LABEL-NON SWITCH SIDE 90ICE M-Z9 CONTROL PNL LABEL-NON SWITCH SIDE 90IC M-Z98 LABEL-CNTRL PNL-NON-SWITCH SIDE 90ISCE 4 E-Z88 SWITCH-LIGHTED R-Z84 4 KNOB-CONTROL IC/ISC A-Z09 4 PANEL INSULATOR P-Z4 8 TUBE GUIDE 8 I-Z 8 O-RING SEAL 9 P-Z4 8 TUBE SEAL, SOLID IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. PAGE OF Star Manufacturing International, Inc.

28 PARTS LIST September, 008 Rev. H MODEL Grill-Max Island Roller Grills 90IC/ISC Series Key Number Part Number Number Per Unit Description & Model Designation 40 R-Y09 4 BLACK PLASTIC LEG 90IC/ISC 4 P-Z40 PLUG-HEYCO / DIA. IC/ISC P-Z40 4 PLUG-HEYCO / DIA. ICE/ISCE 4 A-RG0 ELEMENT RETAINER ASSY LOWER ICE/ISCE A-Z8808 ELEMENT RETAINER-LOWER IC/ISC 4 A-RG0 ELEMENT RETAINER ASSY LOWER ICE/ISCE A-Z8809 ELEMENT RETAINER-LOWER IC/ISC 44 A-Z888 ELEMENT RETAINER-UPPER 4 A-Z889 ELEMENT RETAINER-UPPER 4 A-Z88 COVER PLATE 4 A-Z44 TONGS-PLASTIC NI E-Z89 WIRE SET 90IC/ISC NI E-Z989 WIRE SET 90ICE/ISCE IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. PAGE OF Star Manufacturing International, Inc.