ANALOG SOUND LEVEL METER
|
|
- Loren Briggs
- 5 years ago
- Views:
Transcription
1 ANALOG SOUND LEVEL METER ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA Visit our Web site at Copyright 2004 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call
2 Specifications Min/Max. Decibel Measurements db (7 Range Settings) Accuracy + / db A-Weighted Reading 500 to 10 KHz (Frequency) C-Weighted Reading 30 to 10 KHz (Frequency) Features: Built-in 5/8 Dia. Microphone, 9 Volt Battery Included, Fast and Slow Response Settings, Output Jack (to connect to test equipment or home theatre),1/4-20 Threaded Insert for Tripod Mount. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! 1. Keep work area clean. Cluttered areas invite injuries. 2. Observe work area conditions. Do not use electric products in damp or wet locations. Don t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids. 3. Keep children away. Children must never be allowed in the work area. Do not let them handle the Sound Level Meter. 4. Store idle equipment. When not in use, the Sound Level Meter must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. 5. Use the right tool for the job. Do not attempt to force a small Sound Level Meter to do the work of a larger industrial Sound Level Meter There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 6. Dress properly. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 7. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Use appropriate ear protection when testing. Make sure children, pets, and all bystanders are clear of the area when testing. High volume testing can result in permanent hearing damage without proper ear protection. 8. Maintain tools with care. The unit must be kept clean, dry, and free from oil and grease at all times. Page 2
3 9. Disconnect power. Remove the battery when not in use for a week or more. Leave the Range Selector in the Off position when not in use (to conserve battery power). 10. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 11. Check for damaged parts. Before using the Sound Level Meter, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly. 12. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. 13. Do not operate the Sound Level Meter if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. 14. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. 15. Pacemaker safety warning. People with pacemakers should consult with their physician(s) before using this product; operation of equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking, check to make sure the parts shown on page 7 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Page 3
4 Introduction Designed to measure sound intensity in acoustic environments, this Sound Level Meter works in continuous or intermittent, loud or soft, high/low pitched, or broadband conditions. Examples of usage areas include home theatre installations, factories, offices, schools, airports, auditoriums, and studios. You may connect directly to home theatre systems or external test equipment using the output jack (see Assembly Drawing on page 7). A and C weightings allow you to check compliance with safety regulations while analyzing area acoustics. Slow and Fast Response Settings check peak and average noise levels. Operation Refer to the Assembly Drawing on page 7. FIGURE 1 Installing the Battery This unit comes with a 9 Volt battery. To install or replace, use a Phillips head screwdriver (not included) to remove the screw on the battery compartment as shown in FIGURE 1. Remove the old battery, and replace it with a new one, making sure that the positive (+) and negative (-) battery terminals match polarity markings in the unit. Replace the back panel. Testing the Battery To test the battery, set the RANGE to BATT. If the meter shows a reading in the red BATT TEST region, the battery is still good. If the reading is out of the red BATT TEST region, it means you need to change the battery. When finished, to save power, set the RANGE to OFF. Remove the battery if you are not using the unit for more than a week. See FIGURE 2. FIGURE 2 Good Battery Area Page 4
5 Operation (continued) How the RANGE selector works. You can select one of seven sound level ranges, each containing 16 different ranges (see FIGURE 3). Each number on the range number refers to the mid-point of each range. The needle point on the scale (see FIGURE 2) shows the actual sound level, displaced from the mid-point. For example, If you set the range to 90, and the meter scale reads -3, the actual sound level is 87 (at value where the RANGE is set). FIGURE 3 7 Ranges Taking Sound Measurements. Never hold the Meter directly between you and the sound source. Doing so may produce an error (of several decibels) in the frequency range above 100 Hz. Position the Meter as if there were an imaginary line between you and the Meter, and the line is perpendicular to a line between the meter and the sound source. See FIGURE 4 below. FIGURE 4 Sound Source Imaginary Line Meter YOU Imaginary Line Note: Handle the Meter carefully. The fragile internal movement and microphone will be damaged if dropped. Never operate the Meter at a range setting that causes the needle to Peg back and forth. Pegging may damage the meter scale. 1. If you want to measure short bursts of sound, or peak values, set the RESPONSE to FAST. If you want to measure average sound levels, set the RESPONSE to SLOW. 2. To measure noise level, set the WEIGHTING to A. Set the WEIGHTING to C to measure sound levels of musical material. Note: In the A position, the Meter measures frequencies in the 500 to 10 KHz frequency. In the C position, the Meter measures in the 30 to 10 KHz frequency. Page 5
6 Operation (continued) 3. Set the RANGE to the highest setting (120 db) and then adjust it down until there is a significant deflection of the needle. Always use the lower of any two possible settings. For example, If the RANGE is set at 90 db and the Meter reads around -5, reset the Range to 80 db so that the Meter reads +3 for an actual sound level of 83 db. Note: For an accurate reading, any sound that you measure must be at least 10 db louder than the background noise level. Note: For the best reading, point the Microphone toward the sound source. Use the following chart to determine the acceptable level of noise: Extracted from the U.S. Dept. of Labor Noise Regulations Using the Tripod Adapter You can mount the Meter on a standard tripod (1/4-20 thread) to help eliminate hand noise and noise reflected off of your body. It is also preferable to use a tripod when using external recording or test equipment. Calibration Although the unit comes pre-calibrated from the factory and should not need further calibrating, it may become necessary in the future. If so, take the unit to an authorized audio professional, who can recalibrate the unit by inserting special equipment into the CAL hole on the side of the unit. See page 7. Maintenance 1. Keep the unit clean and dry. Wipe it off with a lint free cloth after each use. 2. Remove the batteries if you are not using the unit for over a week. 3 Store the unit in a dry location. Do not let it freeze or sit in direct sunlight. Page 6
7 Assembly Drawing Microphone Calibration Hole (only to be accessed by an authorized audio professional) Range Selector Weighting Selector Response Selector Output Jack Scale Battery Compartment (Access on back of unit) No Replacement Parts Available For This Unit PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. Page 7
4 TIER STOCKER SERVICE CART
4 TIER STOCKER SERVICE CART 90160 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationWHEEL KIT FOR 13 HP GENERATOR
WHEEL KIT FOR 13 HP GENERATOR 94192 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationWINDSHIELD REMOVAL KIT
WINDSHIELD REMOVAL KIT 94180 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationMINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892
MINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by
More informationELECTRIC HYDRAULIC GEAR PUMP
ELECTRIC HYDRAULIC GEAR PUMP 46169 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More informationCompressor Duty Motor - 1 HP. Model 40132
Compressor Duty Motor - 1 HP Model 40132 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight
More information2 GALLON COOLANT PUMP
2 GALLON COOLANT PUMP Model 45333 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More informationHYDRAULIC SPRING COMPRESSOR SET
HYDRAULIC SPRING COMPRESSOR SET Model 47890 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor
More informationPOWER INVERTER 1,000 WATT / 2,000 WATT PEAK
POWER INVERTER 1,000 WATT / 2,000 WATT PEAK 94009 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS
More informationSquare Solar Garden Light 95706
Square Solar Garden Light 95706 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationMOUNTABLE WALL SINK ASSEMBLY AND OPERATING INSTRUCTIONS
MOUNTABLE WALL SINK 90326 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools. All
More informationLUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at
AIR FILTER, REGULATOR AND LUBRICATOR 40312 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2000 by Harbor Freight
More information14.4 CORDLESS DRILL ASSEMBLY AND OPERATING INSTRUCTIONS
14.4 CORDLESS DRILL 40209 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight Tools. All
More informationBucket Grease Pump ASSEMBLY AND OPERATING INSTRUCTIONS
Bucket Grease Pump 9793 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights
More informationDISC BRAKE CALIPER TOOL SET
DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationSEALER-15-1/2 ELECTRICAL IMPULSE
SEALER-5-/ ELECTRICAL IMPULSE OPERATING INSTRUCTIONS 39 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 000 by Harbor Freight Tools. All rights reserved.
More information2-1/4 Gallon Sprayer
2-/4 Gallon Sprayer 94008 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More informationPOWER INVERTER 700 WATT / 1800 WATT PEAK
POWER INVERTER 700 WATT / 1800 WATT PEAK 91848 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationflexible infrared thermometer
flexible infrared thermometer Model 94233 assembly and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationWOODEN SIDE PANEL KIT
WOODEN SIDE PANEL KIT Model 40141 (FOR USE WITH MODEL 42709 UTILITY TRAILER) ASSEMBLY INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http//www.harborfreight.com Copyright
More informationTURTLE SOLAR LIGHT 94412
TURTLE SOLAR LIGHT 92 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 39 Mission Oaks Blvd., Camarillo, CA 930 Visit
More information2 PIECE SOLAR LIGHT SET 93886
PIECE SOLAR LIGHT SET 93886 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationDigital Auto Multi-Tester
Digital Auto Multi-Tester 95625 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo,
More informationRio color changing solar light
Rio color changing solar light Model 95850 Assembly and operation instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationPISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER ASSEMBLY & OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA 93011
g ordon PISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER 4603 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Copyright 200 by Harbor Freight Tools. All rights reserved. No portion
More informationBEARING ADAPTERS FWD/FRONT WHEEL. Model 45210
BEARING ADAPTERS FWD/FRONT WHEEL Model 45210 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationSTEEL SIDE PANEL KIT. Model (FOR USE WITH MODEL FOLDABLE UTILITY TRAILER)
STEEL SIDE PANEL KIT Model 47423 (FOR USE WITH MODEL 42709 FOLDABLE UTILITY TRAILER) Set up and Operating Instructions (MODEL 42709 TRAILER and TARP NOT INCLUDED. TARP SOLD SEPARATELY. Shown for illustration
More information3 PC. SOLAR GARDEN LIGHT SET 92686
3 PC. SOLAR GARDEN LIGHT SET 92686 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All
More informationSwing Back Trailer Jack
Swing Back Trailer Jack Model: 91474 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationSUBMERSIBLE PUMP. Model ASSEMBLY AND OPERATING INSTRUCTIONS
SUBMERSIBLE PUMP Model 37952 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationUTILITY WAGON WITH 1000 LB. CAPACITY
UTILITY WAGON WITH 1000 LB. CAPACITY 94908 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationASSEMBLY and OPERATING INSTRUCTIONS Mission Oaks Blvd. / Camarillo, CA 93011
SPARK PLUG CLEANER ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More informationOPERATING INSTRUCTIONS
8 FUNCTION DIGITAL MULTIMETER 90939 OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights
More information6 OFF ROAD LIGHT BAR
6 OFF ROAD LIGHT BAR LOUD speaker Model 95953 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationModel Due to continuing improvements, actual product may differ slightly from the product described herein.
12 volt Oooga horn Model 96291 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationBATTERY OPERATED BI-PLANE
BATTERY OPERATED BI-PLANE 91311 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Website at www.harborfreight.com IMPORTANT: If damage is caused due to a crash,
More information2 line price marking gun
2 line price marking gun Model 95878 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationSPOTLIGHT 30 MILLION CANDLEPOWER
SPOTLIGHT 30 MILLION CANDLEPOWER 93175 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight
More information1000 Lb. Motorcycle Lift
1000 Lb. Motorcycle Lift 91764 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
More informationSolar mosquito killer
Solar mosquito killer Model 96415 Assembly And Operation Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More information4 color Solar light. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
4 color Solar light Model 95665 Setup And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor
More informationPNEUMATIC GARDEN STOOL
PNEUMATIC GARDEN STOOL 90473 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com 3 THANK YOU for choosing a HARBOR FREIGHT TOOLS product.
More informationSUBMERSIBLE POND PUMP
SUBMERSIBLE POND PUMP 258 Gallons Per hour 47117 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor
More information25 GALLON PORTABLE OIL LIFT
25 GALLON PORTABLE OIL LIFT Model 92859 SET UP AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationSIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
SIDE-WIND, A-FRAME TRAILER JACK Model 95157 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationTrailer Jack. Model Assembly and Operating Instructions
Trailer Jack Model 37792 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More informationFor technical questions and replacement parts, please call
Digital CLAMP MULTIMETER 42396 95652 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationCAMBELT TENSION GAUGE
CAMBELT TENSION GAUGE Model 96557 Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More information4 in 1 solar bird bath
4 in 1 solar bird bath 66557 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationTWIN HALOGEN SHOP LIGHT
TWIN HALOGEN SHOP LIGHT 36787 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More informationALUMINUM JACK. 3,000 lb. Jack Capacity & JACK STAND COMBO. Model ASSEMBLY AND OPERATING INSTRUCTIONS
ALUMINUM JACK 3,000 lb. Jack Capacity & JACK STAND COMBO 6,000 lb. Jack Stand Capacity (when used in pairs) Model 91850 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationSUBMERSIBLE MINI-PUMP
SUBMERSIBLE MINI-PUMP Model 41287 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationrechargeable umbrella light
rechargeable umbrella light Model 98154 assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationPROPANE TORCH WITH TURBO BURNER
PROPANE TORCH WITH TURBO BURNER MODEL 91894 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationPropane torch. Model Assembly And Operation Instructions
Propane torch Model 39953 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationBATTERY ISOLATOR. Model 93801: 70 Amp Model 93802: 90 Amp
BATTERY ISOLATOR Model 93801: 70 Amp Model 93802: 90 Amp Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
More information4-WHEEL CART ASSEMBLY INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at
4-WHEEL CART ASSEMBLY INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 003 by Harbor Freight Tools. All rights reserved. No portion of
More informationPOLISHER KIT Model 95030
3 PNEUMATIC POLISHER KIT Model 95030 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More information1/2 Ton - 2 Stage Transmission Jack
1/2 Ton - 2 Stage Transmission Jack 34032 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationSUBMERSIBLE PUMP 400 WATTS, WITH FLOAT Model 45019
SUBMERSIBLE PUMP 400 WATTS, WITH FLOAT Model 45019 ASSEMBLY and OPERATING INSTRUCTIONS Drain Water From Basements, Boats, Wells, Shafts, Containers and More! 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationOPERATION MANUAL FOR BRAKE FLUID EXCHANGER
PRODUCT AND COMPANY IDENTIFICATION Product Name: Brake Fluid Exchanger GS-432 Product Use: Brake fluid exchanger Date of issue : 27.05.2012 Revision Date : 05.09.2013 Company Information: Sudheimer Car
More informationDC TO AC POWER INVERTER PWRIC150012W INSTRUCTION MANUAL
DC TO AC POWER INVERTER PWRIC150012W INSTRUCTION MANUAL SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts
More informationp.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual.
p.t.o. Slip clutch 65517 Installation Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read
More information4 in 1 POWER STATION Model: 7226
Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this product. Observe all safety information to protect yourself and others. Failure to observe
More informationELECTRIC LONG SHAFT DIE GRINDER 44141
ELECTRIC LONG SHAFT DIE GRINDER 44141 ASSEMBLY and OPERATING INSTRUCTIONS 1/4 Collet Accepts Most Popular Die Grinding Accessories Diagrams within this manual may not be drawn proportionally. Due to continuing
More information1250 LB. CAPACITY MECHANICAL WHEEL DOLLY
1250 LB. CAPACITY MECHANICAL WHEEL DOLLY 67287 SET-UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationAIR COMPRESSOR 2 HP - 8 GALLON
AIR COMPRESSOR 2 HP - 8 GALLON 40400 ASSEMBLY & OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationDC TO AC POWER INVERTER PWRINV150W INSTRUCTION MANUAL
DC TO AC POWER INVERTER PWRINV150W INSTRUCTION MANUAL SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts
More informationPUSH BUTTON KEY CABINET
PUSH BUTTON KEY CABINET Model 95689 INSTALLATION And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More information1200W Paint DRYING Lamp
1200W Paint DRYING Lamp Model 97641 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationPORTABLE KEY SAFE OPERATING INSTRUCTIONS
PORTABLE KEY SAFE OPERATING INSTRUCTIONS 39 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools. All rights reserved. No portion
More informationAluminum Plus Low Profile Service Jack
Aluminum Plus Low Profile Service Jack Operating Instructions & Parts Manual Model Number ATD7344 ATD7345 Capacity 1.5 Ton 2.5 Ton Model ATD7344 Model ATD7345! This is the safety alert symbol. It is used
More informationOPERATING INSTRUCTIONS. Note: 6V Charging. Requires Manual Shut Off.
Requires Manual Shut Off. 6 / 2 AMP,, DUAL RATE BATTER TTERY CHARGER 45005 OPERATING INSTRUCTIONS E224783 E224783 Note: 6V Charging Due to continuing improvements, actual product may differ slightly from
More informationMIG WELDER 131 ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at
MIG WELDER 131 06098 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools. All rights
More informationARTER AND DC POWER SOURCE
JUMPSTAR ARTER AND DC POWER SOURCE 91045 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 MISSION OAKS BLVD., CAMARILLO, CA 93011 VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM Copyright 2003 by Harbor Freight
More informationCORDLESS 18V CIRCULAR SAW KIT
CORDLESS 8V CIRCULAR SAW KIT 374 ASSEMBLY and OPERATING INSTRUCTIONS www.harborfreight.com 349 Mission Oaks Blvd., Camarillo, CA 930 Copyright 997 by Harbor Freight Tools. All rights reserved. No portion
More informationbig foot panel wagon
big foot panel wagon Model 32826 assembly & Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationWelding Clips. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
Welding Clips Model 95637 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationPRESSURE WASHER WITH ROBIN 6 HP ENGINE
PRESSURE WASHER WITH ROBIN 6 HP ENGINE Model 91142 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ
More informationwill result in death or serious injury. could result in death or serious injury. Indicates a hazardous situation which, if not avoided,
SAFETY SETUP OPERATION MAINTENANCE WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
More informationAIMS POWER INVERTER 2500 WATT / 5000 WATT PEAK
AIMS POWER INVERTER 2500 WATT / 5000 WATT PEAK PWRINV 2500W ASSEMBLY AND OPERATING INSTRUCTIONS TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. ITEM Continuous
More information4 AIR ANGLE GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:
4 AIR ANGLE GRINDER Model 95504 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationSPECIFICATIONS GENERAL SAFETY RULES PERSONAL SAFETY. Save This Manual TOOL USE AND CARE WORK AREA
SPECIFICATIONS 2 Forged Safety Latch Hooks Cable extends to: 44 Drop forged steel hanging bracket Heavy duty 3/16 Steel Cable Pulling Capacity: 1200 LB. One piece double ratchet gear Save This Manual You
More informationATD GALLON PRESSURIZED OIL DRAIN TANK
ATD-5203 30 GALLON PRESSURIZED OIL DRAIN TANK ASSEMBLY & OPERATING INSTRUCTIONS TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel: Adjusts from 47.25 to 70.5 Drain Funnel Diameter:
More information& OPERATING INSTRUCTIONS
ELECTRIC WINCH 12 / 24 VOLT DC DW5000 (5000LBs/2272Kg) DW6000 (6500LBs/2727Kg) DW8000 (8000LBs/3663Kg) DW8500 (8500LBs/3863Kg) DW9000 (9000LBs/4091Kg) ASSEMBLY & OPERATING INSTRUCTIONS DW5000 Specification
More informationPOND KIT WITH LINER 9 X 6
POND KIT WITH LINER 9 X 6 94945 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. To prevent serious injury, Read
More informationAIRPLANE. Model Set up and Operating Instructions. Visit our website at:
AIRPLANE FREE Flying model Model 43678 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com IMPORTANT: If damage is caused due to a crash, your warranty is void. Copyright
More information1000-LB. HYDRAULIC HOIST OWNER S MANUAL
1000-LB. HYDRAULIC HOIST OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationTJ lb Capacity Trailer Jack. 2-in-1 Combo With Swing Back Design. Assembly & Operating Instructions
TJ1500 1500 lb Capacity Trailer Jack 2-in-1 Combo With Swing Back Design Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationTrailer Jack Lb. Ring Mount. Assembly & Operating Instructions.
2000 Lb. Ring Mount Trailer Jack Model 41006 Assembly & Operating Instructions www.harborfreight.com Copyright 1999 by Harbor Freight Tools. All Rights Reserved. No portion of this manual or any artwork
More informationManual Operated Floor Jack
Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply
More informationMINI AIR ANGLE DIE GRINDER
MINI AIR ANGLE DIE GRINDER Model 33171 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationTable of Contents. Safety... 2 Specifications... 3 Setup Parts List and Diagram Warranty Operation Maintenance
Table of Contents Safety Setup Operation Maintenance Safety... 2 Specifications... 3 Setup... 4 Operation... 5 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Diagram... 10 Warranty...
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,
More informationComponent Size Weight Capacity
Specifications Component Size Weight Capacity Top Shelf 72 W x 19-1/2 L 1500 lb Drawer A (x3) 37-3/8 W x 19-1/2 L x 2-1/4 H 154 lb each Drawer B 37-3/8 W x 19-1/2 L x 5-1/4 H 220 lb Drawer C 37-3/8 W x
More informationSUBMERSIBLE DIRTY WATER PUMP
SUBMERSIBLE DIRTY WATER PUMP Model 93819-1 HP Model - 1.2 HP ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed
More informationInstallation Precautions. Use Precautions. Specifications
Important Safety Information Safety Setup Operation Maintenance Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings
More information