STEEL SIDE PANEL KIT. Model (FOR USE WITH MODEL FOLDABLE UTILITY TRAILER)
|
|
- Thomasine Shepherd
- 5 years ago
- Views:
Transcription
1 STEEL SIDE PANEL KIT Model (FOR USE WITH MODEL FOLDABLE UTILITY TRAILER) Set up and Operating Instructions (MODEL TRAILER and TARP NOT INCLUDED. TARP SOLD SEPARATELY. Shown for illustration purposes only) Visit our website at: Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright 2002 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call Manual Revised 10d
2 SPECIFICATIONS TABLE Overall Dim. Front Panel Dim. Rear Panel Dim. Side Panel Dim. Rear Panel Latch Weight 96 L x 48-9/16 W x 15-7/8 H 48-9/16 W x 15-7/8 H x 2 T 44-5/8 L x 15-7/8 H x 2 T 96 L x 15-7/8 H x 2 T Swing Over, Cam Slotted 92 Pounds SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference. GENERAL SAFETY WARNINGS AND PRECAUTIONS KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas invite injuries. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product. 3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product. USE EYE AND HAND PROTECTION. Wear ANSI-approved safety impact goggles and heavy-duty work gloves when using this product. ANSI-approved safety impact goggles and heavy-duty work gloves are available from Harbor Freight Tools. 6. DRESS SAFELY. Do not wear loose clothing or jewelry, as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up above elbows. 7. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera. 8. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS. 9. STAY ALERT. Watch what you are doing at all times. Use common sense. Do not use this product when you are tired or distracted from the job at hand CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately. REPLACEMENT PARTS AND ACCESSORIES: When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools. MAINTAIN THIS PRODUCT WITH CARE. Keep this product clean and dry for better and safer performance. 13. MAINTENANCE: For your safety, service and maintenance should be REV 03f Page 2
3 14. performed regularly by a qualified technician. USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed. It will do the job better and more safely at the capacity for which it was intended. Do not modify this equipment, and do not use this equipment for a purpose for which it was not intended. 15. WARNING: The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors, which cannot be built into this product, but must be supplied by the operator. 1. SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS THIS STEEL SIDE PANEL KIT IS DESIGNED FOR USE ONLY WITH THE MODEL TRAILER (AVAILABLE FROM HARBOR FREIGHT TOOLS) THE MODEL TRAILER. Make sure to attach the Steel Side Panel Kit to the Trailer manufacturer s recommended assembly points. ALWAYS EXAMINE THE STEEL SIDE PANEL KIT FOR LOOSE MOUNTING BOLTS, STRUCTURAL CRACKS, BENDS, DAMAGE, AND ANY OTHER CONDITION THAT MAY AFFECT ITS SAFE OPERATION. Do not use the Steel Side Panel Kit even if minor damage appears. When installing the Steel Side Panel kit, the trailer must be located on a level, solid surface, with tires blocked so that the trailer cannot roll. UNPACKING When unpacking, check to make sure all the parts shown on the Parts List (page 9) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible PROFESSIONAL TECHNICAL ASSEMBLY KNOWLEDGE IS REQUIRED TO SECURELY AND PERMANENTLY ATTACH THE STEEL SIDE PANEL KIT TO THE MODEL TRAILER. ONLY A QUALIFIED TECHNICIAN SHOULD PERFORM THE ASSEMBLY. MAKE SURE TO READ AND UNDERSTAND ALL INSTRUCTIONS AND SAFETY PRECAUTIONS AS OUTLINED IN THE MANUFACTURER S MANUAL FOR Page 3
4 PRODUCT OVERVIEW The Steel Side Panel Kit is designed for use only with the Model Trailer (available from Harbor Freight Tools). Its assembly onto the Trailer requires a 3/4 thick, 4 x 8 plywood board (not provided). Attaching the Steel Side Panel Kit to the Trailer will also require drilling mounting holes through the plywood board. ONLY A QUALIFIED TECHNICIAN SHOULD PERFORM THE AS- SEMBLY. ASSEMBLY INSTRUCTIONS NOTE: For additional references to the parts listed below, refer to the Assembly Diagram (page 9). DRILL 3/8 HOLES notch FIGURE A notch 2. Use the measurements taken in Step #1 to mark and drill ten holes through the 3/4 thick, 4 x 8 plywood board. (See Figure A.) NOTE: You will need to notch out the plywood to allow for the hinge as shown in Figure A. ALIGN PRE-DRILLED HOLES IN PLYWOOD WITH FRAME MOUNTING HOLES 3/4, 4 x 8 PLYWOOD BOARD 1. Measure the on-center distance between the ten mounting holes located on the front frame and two side frames of the Trailer, locations indicated above. FIGURE B MODEL TRAILER 3. With assistance, place the 3/4 thick, 4 x 8 plywood board on the frame of the Trailer. Make sure to align the ten predrilled holes in the plywood board with the ten mounting holes on the front and two sides of the Trailer frame. (See Figure B.) 4. Place the Front Panel (1) on the front of the front end of the Trailer and underneath the plywood board. Make sure to align the two mounting holes at the bottom of the Front Panel with the Page 4
5 previously aligned holes in the plywood board and Trailer frame. Insert two Bolts (6-1) downward through the holes in the Front Panel, plywood board, and Trailer frame. Then, screw on a Nut (7) to each of the two Bolts extending through the underside of the Trailer frame. Do not fully tighten the Nuts in this Step. (See Figure C.) 9. Check to make sure the Steel Side Panel Kit is setting square on the Trailer. Then, firmly wrench tighten all Bolts and Nuts. (See Figure C.) Place one Left Side Panel (2-1) on one side of the Trailer and underneath the plywood board. Slide the Side Panel forward into the lip of the Front Panel (1), and make sure to align the four mounting holes at the bottom of the Side Panel with the previously aligned holes in the plywood board and Trailer frame. Insert four Bolts (6-1) downward through the holes in the Side Panel, plywood board, and Trailer frame. Then, screw a Nut (7) onto each of the four Bolts extending through the underside of the Trailer frame. Do not fully tighten the Nuts in this Step. (See Figure C.) Repeat Step #5 for the remaining Right Side Panel (2-2). (See Figure C.) 7. Align the four mounting holes on one side of the Front Panel (1) with the four mounting holes on the front end of one Left Side Panel (2-1). Insert four Bolts (8) through the four mounting holes on the side of the Front Panel and through the four mounting holes on the front end of the Side Panel. Then, screw a Nut (9) onto each of the four Bolts extending through the inner side of the Side Panel. Do not fully tighten the Nuts in this Step. (See Figure C.) 8. Repeat Step #7 for the other side of the Front Panel (1) and remaining Right Side Panel (2-1). (See Figure C.) REV 05k, 10d Page 5
6 (#6-1) (#6-1) FIGURE C REV 10d Page 6
7 To Attach And Remove The Rear Panel: (#11-1) (#10-1) (#5-1) 1. The Rear Panel (3) is removable for loading and unloading. (See Figure D.) FIGURE D To attach the Rear Panel (3) to the Steel Side Panel Kit, hold the Rear Panel with both hands and insert the Extending Rods at the bottom of the Rear Panel into the Rod Clamps. Then, turn the Left/Right Latch (4-1,4-2) on each rear end of the Left/Right Side Panels (2-1,2-2) to their locked position. (See Figure D.) To temporarily remove the Rear Panel (3), turn the Latches (4-1,4-2) on each rear end of the Left/Right Side Panels (2-1,2-2) to their unlocked position and pull the Extending Rods of the Rear Panel up and out of the Rod Clamps. (See Figure D.) INSPECTION, MAINTENANCE, AND CLEANING 1. BEFORE EACH USE, inspect the general condition of the Steel Side Panel Kit. Check for loose mounting bolts, misalignment or binding of moving parts, cracked, bent, or broken parts and any other condition that may affect its safe operation. Importantly, check the Steel Side Panel Kit regularly to assure the welds remain solid. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment. 2. TO CLEAN, use only water and a mild detergent. REV 03f, 10d Page 7
8 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. PARTS LIST / ASSEMBLY DIAGRAM Part Description Qty. 1 Front Panel Left Side Panel Right Side Panel 1 3 Rear Panel Left Latch Right Latch Bolt (M8) Bolt (M10 x 20) 10 Part Description Qty. 7 Nut (M10) 10 8 Bolt (M8 x 16) 8 9 Nut (M8) Fixed Ring Bolt (M6 x 20) 2 12 Washer 4 14 Nut (M6) 2 15 Pin 2 (#6-1) (#6-1) (#5-1, #9) (#10-1) (#11-1, 14) NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. REV 03f, 10d Page 8
WOODEN SIDE PANEL KIT
WOODEN SIDE PANEL KIT Model 40141 (FOR USE WITH MODEL 42709 UTILITY TRAILER) ASSEMBLY INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http//www.harborfreight.com Copyright
More informationBEARING ADAPTERS FWD/FRONT WHEEL. Model 45210
BEARING ADAPTERS FWD/FRONT WHEEL Model 45210 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationWHEEL KIT FOR 13 HP GENERATOR
WHEEL KIT FOR 13 HP GENERATOR 94192 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More information4 TIER STOCKER SERVICE CART
4 TIER STOCKER SERVICE CART 90160 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationWINDSHIELD REMOVAL KIT
WINDSHIELD REMOVAL KIT 94180 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationMINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892
MINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by
More informationSwing Back Trailer Jack
Swing Back Trailer Jack Model: 91474 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationHYDRAULIC SPRING COMPRESSOR SET
HYDRAULIC SPRING COMPRESSOR SET Model 47890 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor
More information2 GALLON COOLANT PUMP
2 GALLON COOLANT PUMP Model 45333 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More informationMOUNTABLE WALL SINK ASSEMBLY AND OPERATING INSTRUCTIONS
MOUNTABLE WALL SINK 90326 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools. All
More informationSEALER-15-1/2 ELECTRICAL IMPULSE
SEALER-5-/ ELECTRICAL IMPULSE OPERATING INSTRUCTIONS 39 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 000 by Harbor Freight Tools. All rights reserved.
More informationDISC BRAKE CALIPER TOOL SET
DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationSUBMERSIBLE PUMP. Model ASSEMBLY AND OPERATING INSTRUCTIONS
SUBMERSIBLE PUMP Model 37952 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationELECTRIC HYDRAULIC GEAR PUMP
ELECTRIC HYDRAULIC GEAR PUMP 46169 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More informationSquare Solar Garden Light 95706
Square Solar Garden Light 95706 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationRio color changing solar light
Rio color changing solar light Model 95850 Assembly and operation instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationCompressor Duty Motor - 1 HP. Model 40132
Compressor Duty Motor - 1 HP Model 40132 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight
More information2 line price marking gun
2 line price marking gun Model 95878 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More information2-1/4 Gallon Sprayer
2-/4 Gallon Sprayer 94008 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More information6 OFF ROAD LIGHT BAR
6 OFF ROAD LIGHT BAR LOUD speaker Model 95953 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationLUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at
AIR FILTER, REGULATOR AND LUBRICATOR 40312 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2000 by Harbor Freight
More information14.4 CORDLESS DRILL ASSEMBLY AND OPERATING INSTRUCTIONS
14.4 CORDLESS DRILL 40209 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight Tools. All
More informationALUMINUM JACK. 3,000 lb. Jack Capacity & JACK STAND COMBO. Model ASSEMBLY AND OPERATING INSTRUCTIONS
ALUMINUM JACK 3,000 lb. Jack Capacity & JACK STAND COMBO 6,000 lb. Jack Stand Capacity (when used in pairs) Model 91850 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationBucket Grease Pump ASSEMBLY AND OPERATING INSTRUCTIONS
Bucket Grease Pump 9793 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights
More informationSIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
SIDE-WIND, A-FRAME TRAILER JACK Model 95157 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More information25 GALLON PORTABLE OIL LIFT
25 GALLON PORTABLE OIL LIFT Model 92859 SET UP AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationCAMBELT TENSION GAUGE
CAMBELT TENSION GAUGE Model 96557 Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More information3 PC. SOLAR GARDEN LIGHT SET 92686
3 PC. SOLAR GARDEN LIGHT SET 92686 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All
More informationbig foot panel wagon
big foot panel wagon Model 32826 assembly & Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationANALOG SOUND LEVEL METER
ANALOG SOUND LEVEL METER 92282 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools.
More information2 PIECE SOLAR LIGHT SET 93886
PIECE SOLAR LIGHT SET 93886 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationPOWER INVERTER 1,000 WATT / 2,000 WATT PEAK
POWER INVERTER 1,000 WATT / 2,000 WATT PEAK 94009 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS
More information1250 LB. CAPACITY MECHANICAL WHEEL DOLLY
1250 LB. CAPACITY MECHANICAL WHEEL DOLLY 67287 SET-UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationUTILITY WAGON WITH 1000 LB. CAPACITY
UTILITY WAGON WITH 1000 LB. CAPACITY 94908 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationPOLISHER KIT Model 95030
3 PNEUMATIC POLISHER KIT Model 95030 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationPROPANE TORCH WITH TURBO BURNER
PROPANE TORCH WITH TURBO BURNER MODEL 91894 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationBATTERY OPERATED BI-PLANE
BATTERY OPERATED BI-PLANE 91311 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Website at www.harborfreight.com IMPORTANT: If damage is caused due to a crash,
More information4 in 1 solar bird bath
4 in 1 solar bird bath 66557 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationSPECIFICATIONS GENERAL SAFETY RULES PERSONAL SAFETY. Save This Manual TOOL USE AND CARE WORK AREA
SPECIFICATIONS 2 Forged Safety Latch Hooks Cable extends to: 44 Drop forged steel hanging bracket Heavy duty 3/16 Steel Cable Pulling Capacity: 1200 LB. One piece double ratchet gear Save This Manual You
More informationSolar mosquito killer
Solar mosquito killer Model 96415 Assembly And Operation Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationPISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER ASSEMBLY & OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA 93011
g ordon PISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER 4603 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Copyright 200 by Harbor Freight Tools. All rights reserved. No portion
More informationTURTLE SOLAR LIGHT 94412
TURTLE SOLAR LIGHT 92 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 39 Mission Oaks Blvd., Camarillo, CA 930 Visit
More informationAIR COMPRESSOR 2 HP - 8 GALLON
AIR COMPRESSOR 2 HP - 8 GALLON 40400 ASSEMBLY & OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationp.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual.
p.t.o. Slip clutch 65517 Installation Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read
More informationPUSH BUTTON KEY CABINET
PUSH BUTTON KEY CABINET Model 95689 INSTALLATION And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationATD GALLON PRESSURIZED OIL DRAIN TANK
ATD-5203 30 GALLON PRESSURIZED OIL DRAIN TANK ASSEMBLY & OPERATING INSTRUCTIONS TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel: Adjusts from 47.25 to 70.5 Drain Funnel Diameter:
More information1000 Lb. Motorcycle Lift
1000 Lb. Motorcycle Lift 91764 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
More informationModel Due to continuing improvements, actual product may differ slightly from the product described herein.
12 volt Oooga horn Model 96291 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More information4 color Solar light. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
4 color Solar light Model 95665 Setup And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor
More informationrechargeable umbrella light
rechargeable umbrella light Model 98154 assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationDigital Auto Multi-Tester
Digital Auto Multi-Tester 95625 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo,
More informationMOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:
MOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY Model 94813 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure
More informationASSEMBLY and OPERATING INSTRUCTIONS Mission Oaks Blvd. / Camarillo, CA 93011
SPARK PLUG CLEANER ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More information1/2 Ton - 2 Stage Transmission Jack
1/2 Ton - 2 Stage Transmission Jack 34032 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationBATTERY ISOLATOR. Model 93801: 70 Amp Model 93802: 90 Amp
BATTERY ISOLATOR Model 93801: 70 Amp Model 93802: 90 Amp Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationflexible infrared thermometer
flexible infrared thermometer Model 94233 assembly and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationPNEUMATIC GARDEN STOOL
PNEUMATIC GARDEN STOOL 90473 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com 3 THANK YOU for choosing a HARBOR FREIGHT TOOLS product.
More information4-WHEEL CART ASSEMBLY INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at
4-WHEEL CART ASSEMBLY INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 003 by Harbor Freight Tools. All rights reserved. No portion of
More informationPOWER INVERTER 700 WATT / 1800 WATT PEAK
POWER INVERTER 700 WATT / 1800 WATT PEAK 91848 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationPropane torch. Model Assembly And Operation Instructions
Propane torch Model 39953 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationTWIN HALOGEN SHOP LIGHT
TWIN HALOGEN SHOP LIGHT 36787 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More informationManual Operated Floor Jack
Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply
More informationWelding Clips. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
Welding Clips Model 95637 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationAIRPLANE. Model Set up and Operating Instructions. Visit our website at:
AIRPLANE FREE Flying model Model 43678 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com IMPORTANT: If damage is caused due to a crash, your warranty is void. Copyright
More informationMINI AIR ANGLE DIE GRINDER
MINI AIR ANGLE DIE GRINDER Model 33171 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationCOIL SPRING COMPRESSOR CT1945
COIL SPRING COMPRESSOR CT1945 ORIGINAL INSTRUCTIONS INSTRUCTIONS It is important that you read and understand this instruction manual before using this product. You will need this manual for the safety
More informationAluminum Plus Low Profile Service Jack
Aluminum Plus Low Profile Service Jack Operating Instructions & Parts Manual Model Number ATD7344 ATD7345 Capacity 1.5 Ton 2.5 Ton Model ATD7344 Model ATD7345! This is the safety alert symbol. It is used
More information1200W Paint DRYING Lamp
1200W Paint DRYING Lamp Model 97641 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions 2000LB DUAL WHEEL TRAILER JACK (SKU#1227931) Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance
More informationINSTALLATION, OPERATION, & MAINTENANCE MANUAL
INSTALLATION, OPERATION, & MAINTENANCE MANUAL MODEL: HDML-1500XLT-E 1,500 LB CAPACITY ELECTRIC MOTORCYCLE/ATV LIFT *OPTIONAL EQUIPMENT SHOWN FOLLOW THIS MANUAL CAREFULLY TO ENSURE THE MACHINE WILL FUNCTION
More informationOPERATING INSTRUCTIONS
8 FUNCTION DIGITAL MULTIMETER 90939 OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights
More informationANGLE DIE GRINDER KIT
ANGLE DIE GRINDER KIT Model 93157 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationOPERATOR PROTECTIVE EQUIPMENT. Owner s Responsibility
CONGRATULATIONS! You have just made the first step toward making your tire changing chores much easier! This DAA Assist Arm assembly guide will help you to assemble and install your new DAA Assist Arm
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,
More informationSUBMERSIBLE MINI-PUMP
SUBMERSIBLE MINI-PUMP Model 41287 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationSUBMERSIBLE POND PUMP
SUBMERSIBLE POND PUMP 258 Gallons Per hour 47117 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor
More informationManual Operated Floor Jack
Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply
More informationPORTABLE KEY SAFE OPERATING INSTRUCTIONS
PORTABLE KEY SAFE OPERATING INSTRUCTIONS 39 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools. All rights reserved. No portion
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationTrailer Jack Lb. Ring Mount. Assembly & Operating Instructions.
2000 Lb. Ring Mount Trailer Jack Model 41006 Assembly & Operating Instructions www.harborfreight.com Copyright 1999 by Harbor Freight Tools. All Rights Reserved. No portion of this manual or any artwork
More informationATD Gallon Pressurized Oil Drain Owner s Manual
ATD-5203 30 Gallon Pressurized Oil Drain Owner s Manual TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel Working Height: 47.25 to 70.5 Drain Funnel Diameter: 15.75 Plastic Tray:
More informationTWO POST LIFT 7,000 LBS.
R TWO POST LIFT 7,000 LBS. Model 46299 ASSEMBLY AND OPERATING INFORMATION 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight
More informationSPOTLIGHT 30 MILLION CANDLEPOWER
SPOTLIGHT 30 MILLION CANDLEPOWER 93175 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight
More informationINSTALLATION, OPERATION, & MAINTENANCE MANUAL
INSTALLATION, OPERATION, & MAINTENANCE MANUAL VPJ-1500EZ & VPJ-1500EZ-XL Hydraulic Vehicle Positioning Jacks FOLLOW THIS MANUAL CAREFULLY TO ENSURE THE PRODUCT WILL FUNCTION CORRECTLY AND PROVIDE MANY
More informationTable of Contents. Safety... 2 Specifications... 3 Setup Parts List and Diagram Warranty Operation Maintenance
Table of Contents Safety Setup Operation Maintenance Safety... 2 Specifications... 3 Setup... 4 Operation... 5 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Diagram... 10 Warranty...
More information4 AIR ANGLE GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:
4 AIR ANGLE GRINDER Model 95504 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationTrailer Jack. Model Assembly and Operating Instructions
Trailer Jack Model 37792 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More informationInstallation Precautions. Use Precautions. Specifications
Important Safety Information Safety Setup Operation Maintenance Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings
More informationAutomatic Emergency Light
Automatic Emergency Light Item 38013 Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact
More informationSUBMERSIBLE PUMP 400 WATTS, WITH FLOAT Model 45019
SUBMERSIBLE PUMP 400 WATTS, WITH FLOAT Model 45019 ASSEMBLY and OPERATING INSTRUCTIONS Drain Water From Basements, Boats, Wells, Shafts, Containers and More! 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationELECTRONIC WHEEL BALANCER
ELECTRONIC WHEEL BALANCER Model 47211 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationBACKPACK SPRAYER 12 VOLT GAL. CAPACITY
BACKPACK SPRAYER 12 VOLT - 4.8 GAL. CAPACITY Model 94573 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do
More information1000-LB. HYDRAULIC HOIST OWNER S MANUAL
1000-LB. HYDRAULIC HOIST OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationFor technical questions and replacement parts, please call
Digital CLAMP MULTIMETER 42396 95652 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationOPERATION MANUAL FOR BRAKE FLUID EXCHANGER
PRODUCT AND COMPANY IDENTIFICATION Product Name: Brake Fluid Exchanger GS-432 Product Use: Brake fluid exchanger Date of issue : 27.05.2012 Revision Date : 05.09.2013 Company Information: Sudheimer Car
More informationFLOOR JACK CROSS BEAM
Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure
More information& OPERATING INSTRUCTIONS
ELECTRIC WINCH 12 / 24 VOLT DC DW5000 (5000LBs/2272Kg) DW6000 (6500LBs/2727Kg) DW8000 (8000LBs/3663Kg) DW8500 (8500LBs/3863Kg) DW9000 (9000LBs/4091Kg) ASSEMBLY & OPERATING INSTRUCTIONS DW5000 Specification
More informationELECTRIC LONG SHAFT DIE GRINDER 44141
ELECTRIC LONG SHAFT DIE GRINDER 44141 ASSEMBLY and OPERATING INSTRUCTIONS 1/4 Collet Accepts Most Popular Die Grinding Accessories Diagrams within this manual may not be drawn proportionally. Due to continuing
More informationPOND KIT WITH LINER 9 X 6
POND KIT WITH LINER 9 X 6 94945 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. To prevent serious injury, Read
More information