Propane torch. Model Assembly And Operation Instructions

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Propane torch. Model Assembly And Operation Instructions"

Transcription

1 Propane torch Model Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein Mission Oaks Blvd., Camarillo, CA Visit our website at: To prevent serious injury, read and understand all warnings and instructions before use. Copyright 1999 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call Manual revised 10/06

2 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner s record below: Model Serial No. Purchase Date SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Overall Length 31 Tube Diameter 1/2 I.D. Tip Diameter 7/8 Materials 1/2 ID Steel Tube; Brass Valve Warning: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT MUST BE SUPPLIED BY THE OPERATOR. The Operator PLEASE REMEMBER: Do not operate the product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment/reflexes might be impaired. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective gloves and non-skid footwear is recommended. Wear restrictive hair covering to contain long hair. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Maintain proper footing and balance at all times. Never reach across the Propane Torch while in use. Be aware that parts of the Torch become hot during operation. Allow time for the Torch to cool down before storing it away. Do not aim the burner at inflammable materials. Do not aim the burner at yourself, others or animals. Work Area Page

3 TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE YOUR WORK AREA IS: Free of damp, wet or rainy conditions. Free of children (never let them handle tools or machinery). Well-lit. Clean and uncluttered. Do not use or store any flammable liquids or materials in the area surrounding the Propane Torch. Before Operating Note: Propane Torch is for outdoor use only. Do not use the Propane Torch around or near buildings and structures. Do not use Propane Torch in proximity of any flammable substances. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Before operating your Propane Torch check for damaged parts. Never try to alter the torch as this could result in serious injury. Warning: Propane fuel is extremely flammable and under pressure. Do not store Propane fuel in temperatures over 120 degrees F. Never use a flame to check for leaks. Keep cylinder upright when using and storing. Never puncture or set fire to an empty propane cylinder. If while using this tool you notice a gas odor, immediately shut off the propane fueling the Torch. Extinguish all open flames, and carefully check for leaks by using soapy water. If the odor continues, do not use the Torch. Call your gas supplier for assistance. Before each use always check all gas connections and joints to make sure no leaks are present. Do not operate the Propane Torch if you feel that it is not operating normally. Warning: This product contains or produces a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code et seq.) Rev 03/02 Page 3

4 SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1. The Propane Torch is for outdoor use only. Use the Propane Torch only in well-ventilated areas. Keep Propane Torch away from structures and flammable materials. Inhalation of propane fumes may result in carbon monoxide poisoning, injury and/or death. 2. Risk of Explosion. Propane fuel is extremely flammable and under pressure. a. b. c. Contact local solid waste authorities for instructions on correct disposal or recycling of a propane cylinder. Never puncture or set fire to an empty propane cylinder. Never use a propane tank if it shows signs of: Dents, corrosion, gouges, bulges, fire damage, leakage, excessive rust, or any other form of visual external damage. Store propane cylinders properly: Store the cylinder in a well-ventilated area marked for cylinder storage only. Store propane cylinders away from oxidizing or corrosive gas cylinders. Store empty cylinders away from full cylinders and label empty cylinders clearly. Do not store propane fuel in temperatures exceeding 120 F. 3. Risk of Fire. a. Before each use, always check all propane connections and joints to make sure no leaks are present. Also check hoses for cracks or excessive wear. Always replace a damaged hose. b. c. d. e. f. g. h. i. If, while using the Propane Torch, you notice the odor of propane, immediately shut off the propane fueling the Torch. Extinguish all open flames, and carefully check for leaks by using soapy water. Never use a flame to check for leaks. If the odor continues, do not use the Torch and move the propane tank outside, if it is not already outside. Call your local propane supplier for assistance. Make sure the Control Wheel is turned to its OFF position and the propane tank (not included) is removed when the Propane Torch is not in use. Never use gasoline, kerosene, or other highly volatile fluids as a starter as they can explode. Never leave the Propane Torch unattended once it is lit. Keep a fire extinguisher handy. Always keep a commercial fire extinguisher nearby the Propane Torch in case of accidental fire. Do not clean the Propane Torch with combustible or corrosive cleaners. Do not paint any part of the Propane Torch. Never smoke while using the Propane Torch. Make sure all surrounding flames are extinguished. Page 4

5 j. If the flame goes out: immediately shut off the controls, wait a few seconds and reignite. If the flame continues to go out, switch to another propane bottle. k. Use the torch only with the bottle underneath in an upright position. Using the torch upside-down or sideways may result in the valve clogging. l. Never separate the propane bottle from the torch until the control is completely shut and several seconds have passed to ensure that the flame is out. Make sure that no other ignition sources are nearby before separating the tank from the torch. m. Do not use this product with any fuels other than propane. 4. the Burner gets very hot during use. a. Do not aim the Propane Torch s Burner at yourself, others, or animals. Keep spectators clear of the work area. b. Always allow sufficient time for the Propane Torch to completely cool down before storing Do not use the Propane Torch in the rain. Do not store flammable liquids or materials in the area surrounding the Propane Torch. Maintain a firm grip with both hands on the Propane Torch while in use. Never reach across the Propane Torch while in use. Be aware that parts of the Propane Torch become extremely hot during operation. Maintain labels and nameplates on the Propane Torch. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. WARNING! The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). This product, when used with propane fuel, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code , et seq.) Page 5

6 Assembly Your Propane Torch will require some limited assembly. To assist you with assembly and operation, please refer to the Assembly Diagram and Parts List located on the last pages of this manual. It is important that your read the entire manual to become familiar with the unit BEFORE you use the Propane Torch. Before assembling your Propane Torch, be sure that you have all parts described in the Parts List. Operation To assist you with operation, please refer to the Assembly Diagram and Parts List located on pages 4 and 5. Never force the tool or attachment to do the work of a larger industrial tool. It is designed to do the job better and more safely at the rate for which it was intended. This tool is designed to be used and operated on LP Gas (Liquid Propane) which is usually found in a gas cylinder Make certain the Adjusting Knob (part #14) is OFF. Your Propane Torch uses a standard 14.1 oz. cylinder. Hold the cylinder upright and screw it into the Needle valve (part #12) clockwise. Screw the cylinder hand tight without using excessive force. Open the gas valve on the LP cylinder. Slowly allow for Air Flow by turning the Adjusting Knob (part #14). While making sure that you are clear of the outlet of the Torch, place a long match or similarly lit device near the Propane Torch s outlet. This will create a flame. Adjust the flame to a reasonable level by turning the Adjusting Knob (part #14). Note: The lit burner should operate with a blue flame with a small yellow tip. Adjust the knob if the flame is sputtering or popping. To extinguish the flame, close the Adjusting Knob. When the Torch is not to be used over an extended period of time, disconnect the Propane cylinder from the Torch. Make certain the Propane Torch is completely cooled off before storing. if there is any question about a condition being safe or unsafe, do not operate the tool. Unpacking UNPACK AND CHECK CONTENTS When unpacking your Propane Torch, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at Page 6

7 Parts List Part Description Quantity 1 Torch Tube 1 2 Handle Grip 1 3 Screw 1 4 Connector 1 5 Screw 1 6 Filter 1 7 Body-Valve 1 Part Description Quantity 8 Rubber Gasket 1 9 Washer 1 10 Inlet Nozzle 1 11 O Ring 1 12 Needle Valve 1 13 Adjusting Nut 1 14 Adjusting Knob 1 Assembly Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES That ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDER- TAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 7

PROPANE TORCH WITH TURBO BURNER

PROPANE TORCH WITH TURBO BURNER PROPANE TORCH WITH TURBO BURNER MODEL 91894 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,

More information

SUBMERSIBLE MINI-PUMP

SUBMERSIBLE MINI-PUMP SUBMERSIBLE MINI-PUMP Model 41287 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

BEARING ADAPTERS FWD/FRONT WHEEL. Model 45210

BEARING ADAPTERS FWD/FRONT WHEEL. Model 45210 BEARING ADAPTERS FWD/FRONT WHEEL Model 45210 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

HYDRAULIC SPRING COMPRESSOR SET

HYDRAULIC SPRING COMPRESSOR SET HYDRAULIC SPRING COMPRESSOR SET Model 47890 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor

More information

MINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892

MINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892 MINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by

More information

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at AIR FILTER, REGULATOR AND LUBRICATOR 40312 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2000 by Harbor Freight

More information

WHEEL KIT FOR 13 HP GENERATOR

WHEEL KIT FOR 13 HP GENERATOR WHEEL KIT FOR 13 HP GENERATOR 94192 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

2-1/4 Gallon Sprayer

2-1/4 Gallon Sprayer 2-/4 Gallon Sprayer 94008 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights

More information

Model Due to continuing improvements, actual product may differ slightly from the product described herein.

Model Due to continuing improvements, actual product may differ slightly from the product described herein. 12 volt Oooga horn Model 96291 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

DISC BRAKE CALIPER TOOL SET

DISC BRAKE CALIPER TOOL SET DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

2 PIECE SOLAR LIGHT SET 93886

2 PIECE SOLAR LIGHT SET 93886 PIECE SOLAR LIGHT SET 93886 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA

More information

WOODEN SIDE PANEL KIT

WOODEN SIDE PANEL KIT WOODEN SIDE PANEL KIT Model 40141 (FOR USE WITH MODEL 42709 UTILITY TRAILER) ASSEMBLY INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http//www.harborfreight.com Copyright

More information

UTILITY WAGON WITH 1000 LB. CAPACITY

UTILITY WAGON WITH 1000 LB. CAPACITY UTILITY WAGON WITH 1000 LB. CAPACITY 94908 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

2 line price marking gun

2 line price marking gun 2 line price marking gun Model 95878 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

1200W Paint DRYING Lamp

1200W Paint DRYING Lamp 1200W Paint DRYING Lamp Model 97641 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

SIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein.

SIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein. SIDE-WIND, A-FRAME TRAILER JACK Model 95157 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

CAMBELT TENSION GAUGE

CAMBELT TENSION GAUGE CAMBELT TENSION GAUGE Model 96557 Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,

More information

Specifications. Important Safety Information

Specifications. Important Safety Information Specifications Gauge Range 0-30 IN. of mercury (in Hg) 0-760 torr Important Safety Information WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow instructions listed below may result in serious

More information

p.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual.

p.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual. p.t.o. Slip clutch 65517 Installation Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

MINI AIR ANGLE DIE GRINDER

MINI AIR ANGLE DIE GRINDER MINI AIR ANGLE DIE GRINDER Model 33171 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

Solar mosquito killer

Solar mosquito killer Solar mosquito killer Model 96415 Assembly And Operation Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

BATTERY ISOLATOR. Model 93801: 70 Amp Model 93802: 90 Amp

BATTERY ISOLATOR. Model 93801: 70 Amp Model 93802: 90 Amp BATTERY ISOLATOR Model 93801: 70 Amp Model 93802: 90 Amp Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011

More information

ANGLE DIE GRINDER KIT

ANGLE DIE GRINDER KIT ANGLE DIE GRINDER KIT Model 93157 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

Trailer Jack. Model Assembly and Operating Instructions

Trailer Jack. Model Assembly and Operating Instructions Trailer Jack Model 37792 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork

More information

ATD GALLON PRESSURIZED OIL DRAIN TANK

ATD GALLON PRESSURIZED OIL DRAIN TANK ATD-5203 30 GALLON PRESSURIZED OIL DRAIN TANK ASSEMBLY & OPERATING INSTRUCTIONS TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel: Adjusts from 47.25 to 70.5 Drain Funnel Diameter:

More information

AIRPLANE. Model Set up and Operating Instructions. Visit our website at:

AIRPLANE. Model Set up and Operating Instructions. Visit our website at: AIRPLANE FREE Flying model Model 43678 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com IMPORTANT: If damage is caused due to a crash, your warranty is void. Copyright

More information

MIG WELDER 131 ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at

MIG WELDER 131 ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at MIG WELDER 131 06098 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools. All rights

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Table of Contents. Safety... 2 Specifications... 3 Setup Parts List and Diagram Warranty Operation Maintenance

Table of Contents. Safety... 2 Specifications... 3 Setup Parts List and Diagram Warranty Operation Maintenance Table of Contents Safety Setup Operation Maintenance Safety... 2 Specifications... 3 Setup... 4 Operation... 5 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Diagram... 10 Warranty...

More information

OPERATION MANUAL FOR BRAKE FLUID EXCHANGER

OPERATION MANUAL FOR BRAKE FLUID EXCHANGER PRODUCT AND COMPANY IDENTIFICATION Product Name: Brake Fluid Exchanger GS-432 Product Use: Brake fluid exchanger Date of issue : 27.05.2012 Revision Date : 05.09.2013 Company Information: Sudheimer Car

More information

POLISHER KIT Model 95030

POLISHER KIT Model 95030 3 PNEUMATIC POLISHER KIT Model 95030 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

Automatic Emergency Light

Automatic Emergency Light Automatic Emergency Light Item 38013 Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact

More information

Swing Arm Magnifying Lamp

Swing Arm Magnifying Lamp Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

POWER INVERTER 700 WATT / 1800 WATT PEAK

POWER INVERTER 700 WATT / 1800 WATT PEAK POWER INVERTER 700 WATT / 1800 WATT PEAK 91848 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,

More information

Installation Precautions. Use Precautions. Specifications

Installation Precautions. Use Precautions. Specifications Important Safety Information Safety Setup Operation Maintenance Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings

More information

ATD Gallon Pressurized Oil Drain Owner s Manual

ATD Gallon Pressurized Oil Drain Owner s Manual ATD-5203 30 Gallon Pressurized Oil Drain Owner s Manual TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel Working Height: 47.25 to 70.5 Drain Funnel Diameter: 15.75 Plastic Tray:

More information

For technical questions and replacement parts, please call

For technical questions and replacement parts, please call Digital CLAMP MULTIMETER 42396 95652 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA

More information

MOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:

MOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at: MOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY Model 94813 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure

More information

PRESSURE WASHER WITH ROBIN 6 HP ENGINE

PRESSURE WASHER WITH ROBIN 6 HP ENGINE PRESSURE WASHER WITH ROBIN 6 HP ENGINE Model 91142 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ

More information

4 AIR ANGLE GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:

4 AIR ANGLE GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at: 4 AIR ANGLE GRINDER Model 95504 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

ELECTRIC LONG SHAFT DIE GRINDER 44141

ELECTRIC LONG SHAFT DIE GRINDER 44141 ELECTRIC LONG SHAFT DIE GRINDER 44141 ASSEMBLY and OPERATING INSTRUCTIONS 1/4 Collet Accepts Most Popular Die Grinding Accessories Diagrams within this manual may not be drawn proportionally. Due to continuing

More information

CORDLESS 18V CIRCULAR SAW KIT

CORDLESS 18V CIRCULAR SAW KIT CORDLESS 8V CIRCULAR SAW KIT 374 ASSEMBLY and OPERATING INSTRUCTIONS www.harborfreight.com 349 Mission Oaks Blvd., Camarillo, CA 930 Copyright 997 by Harbor Freight Tools. All rights reserved. No portion

More information

IMPORTANT SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION Specifications Overall Dimensions Batteries 9" L x 6-3/4" W x 6-3/4" H 4 - AA (sold separately) IMPORTANT SAFETY INFORMATION Installation Precautions 1. Verify that installation surface has no hidden utility

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

OPERATING INSTRUCTIONS. Note: 6V Charging. Requires Manual Shut Off.

OPERATING INSTRUCTIONS. Note: 6V Charging. Requires Manual Shut Off. Requires Manual Shut Off. 6 / 2 AMP,, DUAL RATE BATTER TTERY CHARGER 45005 OPERATING INSTRUCTIONS E224783 E224783 Note: 6V Charging Due to continuing improvements, actual product may differ slightly from

More information

TRAILER SPRAYER 25 GALLON WITH TRAILER

TRAILER SPRAYER 25 GALLON WITH TRAILER TRAILER SPRAYER 25 GALLON WITH TRAILER Model 96660 ASSEMBLY And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ

More information

RECHARGEABLE 24 LED WORK LIGHT

RECHARGEABLE 24 LED WORK LIGHT RECHARGEABLE 24 LED WORK LIGHT MODEL 95181 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements; actual product may differ slightly from product described herein. 3491 Mission Oaks Blvd.

More information

BACKPACK SPRAYER 12 VOLT GAL. CAPACITY

BACKPACK SPRAYER 12 VOLT GAL. CAPACITY BACKPACK SPRAYER 12 VOLT - 4.8 GAL. CAPACITY Model 94573 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do

More information

5.5 HP GAS POWERED auger

5.5 HP GAS POWERED auger 5.5 HP GAS POWERED auger with 4 Bit Model 96657 Set up, Operating, and Servicing Instructions Danger Using an engine indoors CAN KILL YOU IN MINUTES. Engine exhaust contains carbon monoxide. This is a

More information

IMPORTANT SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION Specifications Outer Dimensions Inner Dimensions Lockbox Inner Dimensions Panel Features Includes 21 W x 15 D x 59 H 20-1/2 W x 12 D x 49-1/2 H 20-1/2 W x 11 D x 7-5/8 H Dual Security System for Keyed

More information

3/8 CORDLESS DRILL 18 VOLT - KEYLESS CHUCK

3/8 CORDLESS DRILL 18 VOLT - KEYLESS CHUCK 3/8 CORDLESS DRILL 18 VOLT - KEYLESS CHUCK Model 93440 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may

More information

POND KIT WITH LINER 9 X 6

POND KIT WITH LINER 9 X 6 POND KIT WITH LINER 9 X 6 94945 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. To prevent serious injury, Read

More information

SUBMERSIBLE DIRTY WATER PUMP

SUBMERSIBLE DIRTY WATER PUMP SUBMERSIBLE DIRTY WATER PUMP Model 93819-1 HP Model - 1.2 HP ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed

More information

ASSEMBLY AND OPERATING INSTRUCTIONS

ASSEMBLY AND OPERATING INSTRUCTIONS PRESSURE WASHER 2 HP,, ELECTRIC 45802 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight

More information

Trailer Jack Lb. Ring Mount. Assembly & Operating Instructions.

Trailer Jack Lb. Ring Mount. Assembly & Operating Instructions. 2000 Lb. Ring Mount Trailer Jack Model 41006 Assembly & Operating Instructions www.harborfreight.com Copyright 1999 by Harbor Freight Tools. All Rights Reserved. No portion of this manual or any artwork

More information

2,000 LB. REMOTE CONTROL UTILITY ELECTRIC WINCH

2,000 LB. REMOTE CONTROL UTILITY ELECTRIC WINCH 2,000 LB. REMOTE CONTROL UTILITY ELECTRIC WINCH Model 92860 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to

More information

ELECTRIC PORTABLE PIPE THREADER. Model ASSEMBLY AND OPERATING INSTRUCTIONS

ELECTRIC PORTABLE PIPE THREADER. Model ASSEMBLY AND OPERATING INSTRUCTIONS ELECTRIC PORTABLE PIPE THREADER Model 93880 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

MANUAL FLUID EXTRACTOR

MANUAL FLUID EXTRACTOR Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure

More information

TRENCHER ASSEMBLY AND OPERATING INSTRUCTIONS. Due to continuing improvements, actual product may differ slightly from the product described herein.

TRENCHER ASSEMBLY AND OPERATING INSTRUCTIONS. Due to continuing improvements, actual product may differ slightly from the product described herein. TRENCHER 93167 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

MOTORCYCLE LIFT RAMP

MOTORCYCLE LIFT RAMP MOTORCYCLE LIFT RAMP 99900 Set up and Operating Instructions Motorcycle Lift Ramp partially hidden in truck bed. Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA

More information

TJ lb Capacity Trailer Jack. 2-in-1 Combo With Swing Back Design. Assembly & Operating Instructions

TJ lb Capacity Trailer Jack. 2-in-1 Combo With Swing Back Design. Assembly & Operating Instructions TJ1500 1500 lb Capacity Trailer Jack 2-in-1 Combo With Swing Back Design Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information

More information

ELECTRIC PORTABLE PIPE THREADER. Model 95955

ELECTRIC PORTABLE PIPE THREADER. Model 95955 ELECTRIC PORTABLE PIPE THREADER Model 95955 Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the

More information

INSTALLATION, OPERATION, & MAINTENANCE MANUAL

INSTALLATION, OPERATION, & MAINTENANCE MANUAL INSTALLATION, OPERATION, & MAINTENANCE MANUAL VPJ-1500EZ & VPJ-1500EZ-XL Hydraulic Vehicle Positioning Jacks FOLLOW THIS MANUAL CAREFULLY TO ENSURE THE PRODUCT WILL FUNCTION CORRECTLY AND PROVIDE MANY

More information

4.8 VOLT RECHARGEABLE CORDLESS SCREWDRIVER

4.8 VOLT RECHARGEABLE CORDLESS SCREWDRIVER 8 VOLT RECHARGEABLE CORDLESS SCREWDRIVER Model 95065 Set up And Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so

More information

ELECTRONIC WHEEL BALANCER

ELECTRONIC WHEEL BALANCER ELECTRONIC WHEEL BALANCER Model 47211 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

19.2V 1/2 Cordless impact

19.2V 1/2 Cordless impact 19.2V 1/2 Cordless impact wrench Model 96448 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

THREE INCH CLEAR WATER PUMP WITH 6.5 HP ENGINE

THREE INCH CLEAR WATER PUMP WITH 6.5 HP ENGINE THREE INCH CLEAR WATER PUMP WITH 6.5 HP ENGINE 94943 ASSEMBLY AND OPERATING INSTRUCTIONS WARNING! Your Warranty is voided if You do not put engine oil in the Engine s crankcase prior to its first use.

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

18 VOLT CORDLESS DRILL

18 VOLT CORDLESS DRILL 18 VOLT CORDLESS DRILL Model 95848 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

PS MIG Volt MIG Welder Assembly & Operating Instructions

PS MIG Volt MIG Welder Assembly & Operating Instructions PS07570 201205 MIG135 115 Volt MIG Welder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation

More information

Belt/Disc. Set up and Operating Instructions

Belt/Disc. Set up and Operating Instructions Belt/Disc Sander 34951 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

OWNER S MANUAL. Affordable Tools Achieve More. MIG140. Visit Our Website at:

OWNER S MANUAL. Affordable Tools Achieve More.  MIG140. Visit Our Website at: Affordable Tools Achieve More Visit Our Website at: www.uwelding.com MIG140 OWNER S MANUAL Carefully read the operation manual prior to using, installing and maintaining the electric welding machine IMPORTANT

More information

AIMS POWER INVERTER 2500 WATT / 5000 WATT PEAK

AIMS POWER INVERTER 2500 WATT / 5000 WATT PEAK AIMS POWER INVERTER 2500 WATT / 5000 WATT PEAK PWRINV 2500W ASSEMBLY AND OPERATING INSTRUCTIONS TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. ITEM Continuous

More information

MORTAR MIXER 6 CU. FT. - 8 HP Briggs &

MORTAR MIXER 6 CU. FT. - 8 HP Briggs & MORTAR MIXER 6 CU. FT. - 8 HP Briggs & Stratton ENGINE Model 95906 Assembly And Operation Instructions IMPORTANT! Your Warranty is voided if: You do not put Engine oil in the Engine s crankcase prior to

More information

48 in. DELUXE ALUMINUM CARGO CARRIER WITH RAMP

48 in. DELUXE ALUMINUM CARGO CARRIER WITH RAMP 48 in. DELUXE ALUMINUM CARGO CARRIER WITH RAMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other

More information

CORDLESS POWER SHEAR 19.2 volts 99735

CORDLESS POWER SHEAR 19.2 volts 99735 CORDLESS POWER SHEAR 19.2 volts 99735 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

18V CORDLESS GREASE GUN. (Tube Grease Is Not Including)

18V CORDLESS GREASE GUN. (Tube Grease Is Not Including) 8V GREASE GUN 8V CORDLESS GREASE GUN (Tube Grease Is Not Including) ' PRODUCT SPECIFICATION Charger Input Power Battery Output Power - Battery Capacity Battery Pack Charge Time Maximum Operating Pressure

More information

12V Lithium-Ion. Model Set up and Operating Instructions. Visit our website at:

12V Lithium-Ion. Model Set up and Operating Instructions. Visit our website at: 12V Lithium-Ion Multifunction Tool Model 67707 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result

More information

Read instructions carefully and follow rules for safe operation. Failure to do so could result in serious injury. Fradan Manufacturing Corp.

Read instructions carefully and follow rules for safe operation. Failure to do so could result in serious injury. Fradan Manufacturing Corp. OPERATOR MANUAL FRADAN POWER BLOWERS Part No. 888-011-222-0 Read instructions carefully and follow rules for safe operation. Failure to do so could result in serious injury. Fradan Manufacturing Corp.

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

2 1/4 TON HYDRAULIC FLOOR JACK

2 1/4 TON HYDRAULIC FLOOR JACK 2 1/4 TON HYDRAULIC FLOOR JACK Item Number W1611 OWNER S MANUAL WARNING It is the owner and/or operators responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product

More information

3000 lb. gas-driven winch

3000 lb. gas-driven winch 3000 lb. gas-driven winch Model 95888 Set up, Operating, and Servicing Instructions Danger Using an engine indoors CAN KILL YOU IN MINUTES. Engine exhaust contains carbon monoxide. This is a poison you

More information

Belt Sander 3 x 21. Model Set up and Operating Instructions. Visit our website at:

Belt Sander 3 x 21. Model Set up and Operating Instructions. Visit our website at: Belt Sander 3 x 21 Model 90045 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

6/12V Battery charger/ starter

6/12V Battery charger/ starter 6/12V Battery charger/ starter 67855 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

H.V.L.P. Gravity Feed Spray Gun

H.V.L.P. Gravity Feed Spray Gun H.V.L.P. Gravity Feed Spray Gun Stock Number M708 OWNER'S MANUAL FOR YOUR SAFETY, please read these instructions carefully and retain them for future use. Illustrations and photographs are intended for

More information

Airless paint spray machine

Airless paint spray machine Airless paint spray machine 99702 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

WARNING! Decals. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. Xxxx xxx xxxx xx xxxx x xxxx.

WARNING! Decals. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. Xxxx xxx xxxx xx xxxx x xxxx. symbols and decals Xxxx xxx xxxx xx xxxx x xxxx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader DOES NOT follow the instructions given in the manual.

More information

440/880LB ELECTRIC HOIST STF-4488EH

440/880LB ELECTRIC HOIST STF-4488EH ELECTRIC HOIST 440/880LB WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

1 MECHANICAL FUEL METER

1 MECHANICAL FUEL METER 1 MECHANICAL FUEL METER USER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

VAc A. Rc Ah. Table of contents. OpERATION MAINTENANcE. Safety... 2 Specifications... 6 Operation Maintenance Warranty...

VAc A. Rc Ah. Table of contents. OpERATION MAINTENANcE. Safety... 2 Specifications... 6 Operation Maintenance Warranty... Table of contents Safety... 2 Specifications... 6 Operation... 7 Maintenance... 10 Warranty... 12 SAFETy SpEcIFIcATIONS OpERATION MAINTENANcE VAc A cca Rc Ah WARNING SyMBOLS AND DEFINITIONS This is the

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

PS Inch (177.8mm) Polisher / Sander Assembly & Operating Instructions

PS Inch (177.8mm) Polisher / Sander Assembly & Operating Instructions PS07401 7-Inch (177.8mm) Polisher / Sander Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation

More information

PRESSURISED SANDBLASTER

PRESSURISED SANDBLASTER PRESSURISED SANDBLASTER MODEL NO: CPSB200 PART NO: 7640128 OPERATION & MAINTENANCE INSTRUCTIONS LS1211 INTRODUCTION Thank you for purchasing this Clarke Pressurised Sandblaster. Before you try to use this

More information