BATTERY OPERATED BI-PLANE
|
|
- Shanon Randall
- 5 years ago
- Views:
Transcription
1 BATTERY OPERATED BI-PLANE ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA Visit our Website at IMPORTANT: If damage is caused due to a crash, your warranty is void. Copyright 2004 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts please call REV 10/05
2 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner s record below: Model Serial No. Purchase Date SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Upper Wing Span: 15-7/8" L x 2-1/2" W Bottom Wing Span: 14-3/8" L x 2-5/8" W Fuselage: 12-3/8" L x 1-5/8" W x 3" H Horizontal Tail: 6-3/4" L x 2-5/8" W Tail Height: 3-1/4" H x 2-3/4" W Also included: (1) spare propeller, (1) battery charger and glue. The Bi-Plane charger requires 4 AA size batteries. Not included. Safety Warnings and Precautions WARNING: When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this product! 1. Keep work area clean. Cluttered areas invite injuries. 2. Observe work area conditions. Keep work area well lit. Keep work area uncluttered and free of debris. Cluttered areas invite injury. 3. Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for any broken or damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately. 4. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. 5. Always check hardware and assembled parts after assembling. All connections should be tight and hardware tightened. 6. Children should only be allowed to play with the Bi-Plane when closely supervised by a responsible adult. 7. Store idle equipment. When not in use always lock up the Bi-Plane and keep it out of the reach of children. 8. Dress properly. Wear restrictive hair covering to contain long hair. 9. Use eye protection. Always wear ANSI approved impact safety goggles when assembling this product. 10. Maintain products with care. Keep the Bi-Plane in a dry location. Do not expose it to prolonged moisture. SKU For technical questions, please call Page 2
3 11. Do not modify this Bi-Plane and do not use this Bi-Plane for a purpose for which it was not intended. 12. Do not use or assemble the Bi-Plane if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not assemble or use the Bi-Plane. 13. Do not pick up the Bi-Plane while it is in motion. 14. Use only Batteries of the type recommended. 15. Do not mix old and new batteries. 16. Remove batteries if the Bi-Plane is not used for a long period of time. 17. Do not recharge non-rechargeable batteries. 18. Make certain to use the Bi-Plane in a large area free from interference from trees, electrical power lines and other obstacles. 19. Never fly near buildings, cars or busy streets. 20. Do not fly the Bi-Plane at or near other people or animals. 21. Do not fly the Bi-Plane if wind speeds are above 10 MPH. 22. Do not allow children to use glue without adult supervision. Make certain that the glue is stored out of reach of children and animals. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Assembly/ Operation Your Battery Operated Bi-Plane will require complete assembly. It is important that you read the entire manual to become familiar with the product BEFORE you use the Bi-Plane. Before assembling the Bi-Plane be sure that you have all parts described in the Parts List and Assembly Diagram located on the last pages of this manual. Set out all parts on a clear and level surface prior to assembly. 1. Insert the Battery/Switch Compartment Plug (13) into the plug located on the Fuselage (1)- see Figure Remove the backing from the tape on the center of the Lower Wing (11). IMPORTANT: If damage is caused due to a crash, your warranty is void. REV 05/06 SKU For technical questions, please call Page 3
4 Figure 1 Figure 2 Fuselage (1) Fuselage (1) Lower Wing (11) Battery/Switch Compartment Plug (13) Lower Wing (11) Note: Make certain to only peel off the backing. Peeling off too much will also remove the sticky tape so that the parts will not adhere to one another. The backing should peel off easily; if it is not coming off easily, you may be removing the backing and the tape. 3. Attach the Lower Wing (11) with Battery/Switch Compartment Plug (13) to the Fuselage-see Figure 2. Make certain that the Lower Wing (11) with Battery/Switch Compartment Plug (13) and the Fuselage (1) are lined up perfectly before pressing them together. 4. Locate both Bi-Wing Supports (10). The Bi-Wing Supports (10) must be set on the Lower Wing (11) pointing forward and outward-see Figure 3. Remove the tape backing from both sides of the Lower Wing (11) and press the Bi-Wing Supports (10) into place as in Figure 3. Figure 3 Upper Wing Support (3) Figure 4 Tail Wing Support (8) Bi-Wing Support (10) Lower Wing (11) Horizontal Tail Wing (12) 5. Remove the four tape backings from under the Upper Wing (9). Line up the taped areas with the Upper Wing Supports (3) and the Bi-Wing Supports (10). Press the Upper Wing (9) into place. 6. Locate the two (2) Horizontal Tail Wings (12). Remove the tape backings from the Tail Wing Platform. Line up the taped areas of the Horizontal Tail Wings (12) with the Tail Wing Support (8) and press them into place-see Figure Snap the Landing Gear Assembly (15) into the slot at the front and bottom of the Fuselage (1)- see Figure With one hand holding the Fuselage (1), push the Propeller (16) and Spinner (17) onto the shaft located on the nose of the Fuselage (1). 9. Place the Decals (19) on the Bi-Plane. SKU For technical questions, please call Page 4
5 Figure 5 Figure 6 Charger (20) into the Battery/Switch Compartment (13) Landing Gear Assembly (15) 10. Make certain that the On/OFF switch for the Bi-Plane is in the OFF position. Install four (4) AA Batteries into the Charger (20) making certain that the (+) and (-) polarity marks are lined up correctly. 11. Plug the Charger (20) into the Battery/Switch Compartment (13)- see Figure 6. Charge the Batteries for 30 seconds only. WARNING! NEVER charge the batteries longer than 30 seconds. Overcharging can cause overheating, resulting in PERSONAL INJURY or property damage. Turn the Bi-Plane ON and allow the batteries to run through one cycle until the Bi-Plane runs down. Recharge battery at this point. First Motorized Test Flight Fly the Bi-Plane in an open area, free of obstructions (especially phone and electrical power lines) and fly it on a calm day. Never fly in winds above 10 MPH. Make certain that you fly in a large and clear area as you experiment with flight patterns. Wind can take the Bi-Plane a considerable distance. Flying the Bi-Plane 1. Turn the On/Off Switch on the Bi-Plane to the ON position. Tilt the Bi-plane with the nose 10 degrees upward and face it into the wind. Firmly toss the Bi-Plane. 2. Turning OFF the power for about 15 minutes between each flight will prolong your batteries life-span. 3. To adjust the flight radius of the Bi-Plane, you can bend the rudder of the Horizontal Tail Wing (12) two or three degrees left or right. 4. Check the Bi-Plane for damage before each use. Make certain that the wings are correctly aligned and that they are free from damage. Make certain that the Bi-Plane and all of its parts are free from damage. Make certain that the Propeller (16) is securely in place before using. 5. The Bi-Plane comes with one container of Glue for any minor repairs which are needed if damage occurs during use. REV 10/05 SKU For technical questions, please call Page 5
6 Unpacking When unpacking the Battery Operated Bi-Plane, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at Part # Description Quantity Part # Description Quantity 1 Fuselage 1 11 Low wing 1 2 Motor Mount 1 12 Horizontal Tail Wing 2 3 Upper Wing Support 2 13 Battery-Switch 4 Canopy 1 Compartment 1 5 Pilot 1 15 Landing Gear Assy 1 6 Vertical Tail Wing 1 16 Propeller 1 7 Horizontal Tail Wing 1 17 Spinner 1 8 Tail Support 1 18 Motor 1 9 Upper Wing 1 19 Decals 2 10 Bi-wing Support 2 20 Charger 1 Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. 19 Charger (20) not shown. SKU For technical questions, please call Page 6
AIRPLANE. Model Set up and Operating Instructions. Visit our website at:
AIRPLANE FREE Flying model Model 43678 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com IMPORTANT: If damage is caused due to a crash, your warranty is void. Copyright
More information2 PIECE SOLAR LIGHT SET 93886
PIECE SOLAR LIGHT SET 93886 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More information3 PC. SOLAR GARDEN LIGHT SET 92686
3 PC. SOLAR GARDEN LIGHT SET 92686 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All
More informationTURTLE SOLAR LIGHT 94412
TURTLE SOLAR LIGHT 92 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 39 Mission Oaks Blvd., Camarillo, CA 930 Visit
More informationUTILITY WAGON WITH 1000 LB. CAPACITY
UTILITY WAGON WITH 1000 LB. CAPACITY 94908 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationPNEUMATIC GARDEN STOOL
PNEUMATIC GARDEN STOOL 90473 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com 3 THANK YOU for choosing a HARBOR FREIGHT TOOLS product.
More informationRio color changing solar light
Rio color changing solar light Model 95850 Assembly and operation instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More information4 TIER STOCKER SERVICE CART
4 TIER STOCKER SERVICE CART 90160 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationMINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892
MINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by
More informationWHEEL KIT FOR 13 HP GENERATOR
WHEEL KIT FOR 13 HP GENERATOR 94192 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationWOODEN SIDE PANEL KIT
WOODEN SIDE PANEL KIT Model 40141 (FOR USE WITH MODEL 42709 UTILITY TRAILER) ASSEMBLY INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http//www.harborfreight.com Copyright
More informationWINDSHIELD REMOVAL KIT
WINDSHIELD REMOVAL KIT 94180 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More information2 GALLON COOLANT PUMP
2 GALLON COOLANT PUMP Model 45333 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More informationLUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at
AIR FILTER, REGULATOR AND LUBRICATOR 40312 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2000 by Harbor Freight
More informationPISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER ASSEMBLY & OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA 93011
g ordon PISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER 4603 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Copyright 200 by Harbor Freight Tools. All rights reserved. No portion
More informationSquare Solar Garden Light 95706
Square Solar Garden Light 95706 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationMOUNTABLE WALL SINK ASSEMBLY AND OPERATING INSTRUCTIONS
MOUNTABLE WALL SINK 90326 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools. All
More information2-1/4 Gallon Sprayer
2-/4 Gallon Sprayer 94008 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More informationSTEEL SIDE PANEL KIT. Model (FOR USE WITH MODEL FOLDABLE UTILITY TRAILER)
STEEL SIDE PANEL KIT Model 47423 (FOR USE WITH MODEL 42709 FOLDABLE UTILITY TRAILER) Set up and Operating Instructions (MODEL 42709 TRAILER and TARP NOT INCLUDED. TARP SOLD SEPARATELY. Shown for illustration
More information25 GALLON PORTABLE OIL LIFT
25 GALLON PORTABLE OIL LIFT Model 92859 SET UP AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationbig foot panel wagon
big foot panel wagon Model 32826 assembly & Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More information4 in 1 solar bird bath
4 in 1 solar bird bath 66557 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationBucket Grease Pump ASSEMBLY AND OPERATING INSTRUCTIONS
Bucket Grease Pump 9793 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights
More informationDISC BRAKE CALIPER TOOL SET
DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationHYDRAULIC SPRING COMPRESSOR SET
HYDRAULIC SPRING COMPRESSOR SET Model 47890 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor
More informationFIRE PHOENIX RADIO CONTROLLED AIRPLANE
FIRE PHOENIX RADIO CONTROLLED AIRPLANE ASSEMBLY AND OPERATION INSTRUCTIONS YIN YAN MODEL TECH. MFT. 1 SPECIFICATIONS Material EPO Plane Battery Li-Po 1300mAh 11.1V Radio 4 Channel Wing Span 1200mm Length
More informationELECTRIC HYDRAULIC GEAR PUMP
ELECTRIC HYDRAULIC GEAR PUMP 46169 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More informationCompressor Duty Motor - 1 HP. Model 40132
Compressor Duty Motor - 1 HP Model 40132 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight
More information4-WHEEL CART ASSEMBLY INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at
4-WHEEL CART ASSEMBLY INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 003 by Harbor Freight Tools. All rights reserved. No portion of
More informationSwing Back Trailer Jack
Swing Back Trailer Jack Model: 91474 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationBEARING ADAPTERS FWD/FRONT WHEEL. Model 45210
BEARING ADAPTERS FWD/FRONT WHEEL Model 45210 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More information2 line price marking gun
2 line price marking gun Model 95878 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationSEALER-15-1/2 ELECTRICAL IMPULSE
SEALER-5-/ ELECTRICAL IMPULSE OPERATING INSTRUCTIONS 39 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 000 by Harbor Freight Tools. All rights reserved.
More informationSPOTLIGHT 30 MILLION CANDLEPOWER
SPOTLIGHT 30 MILLION CANDLEPOWER 93175 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight
More informationANALOG SOUND LEVEL METER
ANALOG SOUND LEVEL METER 92282 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools.
More informationSIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
SIDE-WIND, A-FRAME TRAILER JACK Model 95157 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More information14.4 CORDLESS DRILL ASSEMBLY AND OPERATING INSTRUCTIONS
14.4 CORDLESS DRILL 40209 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight Tools. All
More informationPOWER INVERTER 1,000 WATT / 2,000 WATT PEAK
POWER INVERTER 1,000 WATT / 2,000 WATT PEAK 94009 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS
More informationModel Due to continuing improvements, actual product may differ slightly from the product described herein.
12 volt Oooga horn Model 96291 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationPropane torch. Model Assembly And Operation Instructions
Propane torch Model 39953 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationrechargeable umbrella light
rechargeable umbrella light Model 98154 assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationSolar mosquito killer
Solar mosquito killer Model 96415 Assembly And Operation Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationPORTABLE KEY SAFE OPERATING INSTRUCTIONS
PORTABLE KEY SAFE OPERATING INSTRUCTIONS 39 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools. All rights reserved. No portion
More information6 OFF ROAD LIGHT BAR
6 OFF ROAD LIGHT BAR LOUD speaker Model 95953 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More information1250 LB. CAPACITY MECHANICAL WHEEL DOLLY
1250 LB. CAPACITY MECHANICAL WHEEL DOLLY 67287 SET-UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationTWIN HALOGEN SHOP LIGHT
TWIN HALOGEN SHOP LIGHT 36787 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More informationCAMBELT TENSION GAUGE
CAMBELT TENSION GAUGE Model 96557 Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More informationSUBMERSIBLE PUMP. Model ASSEMBLY AND OPERATING INSTRUCTIONS
SUBMERSIBLE PUMP Model 37952 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationDigital Auto Multi-Tester
Digital Auto Multi-Tester 95625 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo,
More informationBATTERY ISOLATOR. Model 93801: 70 Amp Model 93802: 90 Amp
BATTERY ISOLATOR Model 93801: 70 Amp Model 93802: 90 Amp Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
More information4 color Solar light. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
4 color Solar light Model 95665 Setup And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor
More informationPROPANE TORCH WITH TURBO BURNER
PROPANE TORCH WITH TURBO BURNER MODEL 91894 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationSUBMERSIBLE MINI-PUMP
SUBMERSIBLE MINI-PUMP Model 41287 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationflexible infrared thermometer
flexible infrared thermometer Model 94233 assembly and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationALUMINUM JACK. 3,000 lb. Jack Capacity & JACK STAND COMBO. Model ASSEMBLY AND OPERATING INSTRUCTIONS
ALUMINUM JACK 3,000 lb. Jack Capacity & JACK STAND COMBO 6,000 lb. Jack Stand Capacity (when used in pairs) Model 91850 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationPUSH BUTTON KEY CABINET
PUSH BUTTON KEY CABINET Model 95689 INSTALLATION And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationp.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual.
p.t.o. Slip clutch 65517 Installation Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read
More informationPOLISHER KIT Model 95030
3 PNEUMATIC POLISHER KIT Model 95030 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More information1000 Lb. Motorcycle Lift
1000 Lb. Motorcycle Lift 91764 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
More information1/2 Ton - 2 Stage Transmission Jack
1/2 Ton - 2 Stage Transmission Jack 34032 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationATD GALLON PRESSURIZED OIL DRAIN TANK
ATD-5203 30 GALLON PRESSURIZED OIL DRAIN TANK ASSEMBLY & OPERATING INSTRUCTIONS TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel: Adjusts from 47.25 to 70.5 Drain Funnel Diameter:
More informationAIR COMPRESSOR 2 HP - 8 GALLON
AIR COMPRESSOR 2 HP - 8 GALLON 40400 ASSEMBLY & OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationWelding Clips. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
Welding Clips Model 95637 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationASSEMBLY and OPERATING INSTRUCTIONS Mission Oaks Blvd. / Camarillo, CA 93011
SPARK PLUG CLEANER ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More informationPOWER INVERTER 700 WATT / 1800 WATT PEAK
POWER INVERTER 700 WATT / 1800 WATT PEAK 91848 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationSUBMERSIBLE POND PUMP
SUBMERSIBLE POND PUMP 258 Gallons Per hour 47117 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor
More informationManual Operated Floor Jack
Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply
More informationSUBMERSIBLE PUMP 400 WATTS, WITH FLOAT Model 45019
SUBMERSIBLE PUMP 400 WATTS, WITH FLOAT Model 45019 ASSEMBLY and OPERATING INSTRUCTIONS Drain Water From Basements, Boats, Wells, Shafts, Containers and More! 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationSPECIFICATIONS GENERAL SAFETY RULES PERSONAL SAFETY. Save This Manual TOOL USE AND CARE WORK AREA
SPECIFICATIONS 2 Forged Safety Latch Hooks Cable extends to: 44 Drop forged steel hanging bracket Heavy duty 3/16 Steel Cable Pulling Capacity: 1200 LB. One piece double ratchet gear Save This Manual You
More informationTable of Contents. Safety... 2 Specifications... 3 Setup Parts List and Diagram Warranty Operation Maintenance
Table of Contents Safety Setup Operation Maintenance Safety... 2 Specifications... 3 Setup... 4 Operation... 5 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Diagram... 10 Warranty...
More informationInstallation Precautions. Use Precautions. Specifications
Important Safety Information Safety Setup Operation Maintenance Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings
More informationTrailer Jack. Model Assembly and Operating Instructions
Trailer Jack Model 37792 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More informationOPERATING INSTRUCTIONS
8 FUNCTION DIGITAL MULTIMETER 90939 OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights
More informationAutomatic Emergency Light
Automatic Emergency Light Item 38013 Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact
More informationManual Operated Floor Jack
Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply
More informationTrailer Jack Lb. Ring Mount. Assembly & Operating Instructions.
2000 Lb. Ring Mount Trailer Jack Model 41006 Assembly & Operating Instructions www.harborfreight.com Copyright 1999 by Harbor Freight Tools. All Rights Reserved. No portion of this manual or any artwork
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationIMPORTANT SAFETY INFORMATION
Specifications Tricycle Height 26 Front Wheel 5/8 Axle Diameter, 13 Pneumatic Knobby Tire Back Wheels 5/8 Axle Diameter, 10 Pneumatic Knobby Tire Age Range 5 and up Weight Capacity 150 lb. IMPORTANT SAFETY
More informationComponent Size Weight Capacity
Specifications Component Size Weight Capacity Top Shelf 72 W x 19-1/2 L 1500 lb Drawer A (x3) 37-3/8 W x 19-1/2 L x 2-1/4 H 154 lb each Drawer B 37-3/8 W x 19-1/2 L x 5-1/4 H 220 lb Drawer C 37-3/8 W x
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,
More informationBACKPACK SPRAYER 12 VOLT GAL. CAPACITY
BACKPACK SPRAYER 12 VOLT - 4.8 GAL. CAPACITY Model 94573 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do
More informationMOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:
MOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY Model 94813 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure
More informationATD Gallon Pressurized Oil Drain Owner s Manual
ATD-5203 30 Gallon Pressurized Oil Drain Owner s Manual TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel Working Height: 47.25 to 70.5 Drain Funnel Diameter: 15.75 Plastic Tray:
More informationRECHARGEABLE 24 LED WORK LIGHT
RECHARGEABLE 24 LED WORK LIGHT MODEL 95181 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements; actual product may differ slightly from product described herein. 3491 Mission Oaks Blvd.
More informationwill result in death or serious injury. could result in death or serious injury. Indicates a hazardous situation which, if not avoided,
SAFETY SETUP OPERATION MAINTENANCE WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
More informationDC TO AC POWER INVERTER PWRIC150012W INSTRUCTION MANUAL
DC TO AC POWER INVERTER PWRIC150012W INSTRUCTION MANUAL SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts
More informationFor technical questions and replacement parts, please call
Digital CLAMP MULTIMETER 42396 95652 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationDC TO AC POWER INVERTER PWRINV150W INSTRUCTION MANUAL
DC TO AC POWER INVERTER PWRINV150W INSTRUCTION MANUAL SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts
More information1200W Paint DRYING Lamp
1200W Paint DRYING Lamp Model 97641 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationMINI AIR ANGLE DIE GRINDER
MINI AIR ANGLE DIE GRINDER Model 33171 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationANGLE DIE GRINDER KIT
ANGLE DIE GRINDER KIT Model 93157 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationELECTRIC LONG SHAFT DIE GRINDER 44141
ELECTRIC LONG SHAFT DIE GRINDER 44141 ASSEMBLY and OPERATING INSTRUCTIONS 1/4 Collet Accepts Most Popular Die Grinding Accessories Diagrams within this manual may not be drawn proportionally. Due to continuing
More informationASSEMBLY AND OPERATING INSTRUCTIONS
PRESSURE WASHER 2 HP,, ELECTRIC 45802 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight
More informationARTER AND DC POWER SOURCE
JUMPSTAR ARTER AND DC POWER SOURCE 91045 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 MISSION OAKS BLVD., CAMARILLO, CA 93011 VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM Copyright 2003 by Harbor Freight
More informationPRESSURE WASHER WITH ROBIN 6 HP ENGINE
PRESSURE WASHER WITH ROBIN 6 HP ENGINE Model 91142 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ
More information360 Watt Charge Controller
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationINSTALLATION, OPERATION, & MAINTENANCE MANUAL
INSTALLATION, OPERATION, & MAINTENANCE MANUAL MODEL: HDML-1500XLT-E 1,500 LB CAPACITY ELECTRIC MOTORCYCLE/ATV LIFT *OPTIONAL EQUIPMENT SHOWN FOLLOW THIS MANUAL CAREFULLY TO ENSURE THE MACHINE WILL FUNCTION
More informationFLOOR JACK CROSS BEAM
Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure
More information