Pumping Sugar Mass and Magma in Sugar Cane Plants with NEMO pump
|
|
- Rudolf Dawson
- 6 years ago
- Views:
Transcription
1 Pumping Sugar Mass and Magma in Sugar Cane Plants with NEMO pump NEMO pump
2
3 NEMO PUMP FOR MAGMA: APPLICATION MAGMA AT AN OPEN TANK: -Temperature: C; -Density: 1,5 -Viscosity: up to cp -Sugar Concentration: Brix; -Suction: floaded with open tank; -Solid sugar cristals : size 0,3 0,9 mm
4 NEMO PUMP FOR MAGMA: OPEN TANK CAVITATION ANALYSIS
5 NEMO PUMP FOR MAGMA: OPEN TANK INSTALLATION DETAILS AT THE SUCTION SIDE
6 NEMO PUMP FOR MAGMA: OPEN TANK INSTALLATION DETAILS AT THE SUCTION SIDE
7 NEMO PUMP FOR MAGMA: OPEN TANK INSTALLATION DETAILS AT THE SUCTION SIDE
8 NEMO PUMP FOR MAGMA: OPEN TANK NOT RECOMENDED
9 NEMO PUMP FOR MAGMA: OPEN TANK NOT RECOMENDED
10 BEST PRACTICES NEMO PUMP FOR MAGMA: OPEN TANK The pump must be installed just under the tank; We should use a net in the bottom of the tank to broken the sugar stones; We suggest a 30mm net; The net must be in a position to not generate any restriction to the pump suction, to not block the suction side; We should have hat water connection to clean the pump and steam connection to clean the pipeline; Maximum speed recommended 60 RPM; Pump with inspection ports; We recommend the installation of sonic (radar) sensor in the suction tank to guaranty at least 0,5 meter of positive pressure
11 BEST PRACTICES NEMO PUMP FOR MAGMA: OPEN TANK NEMO PUMP serie SY with bearing house Pumping of Magma A, B, C up to 89 Brix. Flow rate: up 55 m 3 /h; Pressure: from up to 12 bar; Suction and discharge flange with inspection ports
12 NEMO PUMP FOR MAGMA: OPEN TANK BEST PRACTICES Model Pressure [bar] Flange [inch] Flow [m3/h] Area [m2] Flow [m3/s] Axial speed [m/s] NM148SY01L07Z ,5 0,073 0,015 0,211 NM148SY02S14Z ,7 0,073 0,009 0,121 NM148SY01L04J ,5 0,051 0,015 0,304 NM148SY02S08J ,7 0,051 0,009 0,174 NM125SY01L07J ,3 0,051 0,012 0,243 NM125SY02S14J ,5 0,051 0,005 0,090 NM105SY01L07J ,7 0,032 0,005 0,160 NM105SY02S14J ,1 0,032 0,003 0,
13 APPLICATION AT VACUMM PAN: -Temperature: C -Viscosity: up to cp -Density: 1,5 -Sugar concentration: Brix; -Suction side: flooed with closed tank; -Solid cristal sugar: size 1,0 1,8 mm
14 INSTALLATION
15 INSTALLATION
16 INSTALLATION
17 INSTALLATION
18 CAVITATION ANALYSIS:
19 DETAILS OF INSTALLATION
20 DETAILS OF INSTALLATION
21 DETAILS OF INSTALLATION
22 DETAILS OF INSTALLATION
23 DETAILS OF INSTALLATION
24 DETAILS OF INSTALLATION
25 NEMO PUMP FOR SUGAR MASS: CLOSED TANK -If it is possible we suggest to use suction and discharge piping with heated jacket; -We suggest to have steam conection to clean the pipeline and hot water conection to clean the pump; -To use the SY pump with a bigger flange connection trying to follow the customer pipeline to avoid restrictions in the suction side; -Pump with inspection ports; -Maximum speed recommended 60 RPM; BEST PRACTICES -The pump must have at least 12 meter of positive pressure
26 BEST PRACTICES NEMO serie SY with bearing house Pumping of Mass A, B, C up to 96 Brix. Flow rate: up to 32 m 3 /h; Pressure: up to 12 bar; Expanded suction flange; Inspection ports in the suction side
27 BEST PRACTICES Model Pressure [bar] Flange [inch] Flow [m3/h] Area [m2] Flow [m3/s] Axial speed [m/s] NM148SY02S14Z ,7 0,292 0,009 0,030 NM148SY02S08Z ,7 0,203 0,009 0,043 NM125SY02S14J ,5 0,051 0,130 0,035 NM105SY02S14J ,1 0,032 0,073 0,
PVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More informationSystem One Pumps Selecting Centrifugal Pumps S1-201
Selecting Centrifugal Pumps S1-201 Operating Parameters Head/Capacity Temperature Viscosity Density Vapor Pressure Solids Content Chemical Compatibility Multiple conditions Remember The system controls
More informationCAMERON HYDRAULIC DATA
CAMERON HYDRAULIC DATA Preface to the Twentieth Edition The Book is a Flowserve Corporation publication and, as in the previous nineteen editions, is published as an aid to engineers involved with the
More informationPositive Displacement Pump Technical Manual
Positive Displacement Pump Technical Manual R11: 12/9 www.fristam.com fristam@fristampumps.com 241 Parview Rd. Middleton, WI 53562 8-841-51 68-831-51 Fristam Pumps PD Tech Manual 3 Table of Contents Section
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP BSM bronze pumps are ideal for use where corrosion resistant materials are required such as providing circulation on water-jacketed engines, pumping saline solutions as well as a variety
More informationData sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.
Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical
More informationTopGear. Gear Pumps JOHNSON PUMP
TopGear Gear Pumps JOHNSON PUMP Axiom Technologies-Kolkata Ph:+91 33 32951385 admin@axiomtech.co.in TopGear When reliability is the priority Gear pumps are used in all types of manufacturing industries
More informationData sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6
Data sheet Item no.: Page: 1 / 6 Operating data Operating data determined for maximum inlet pressure Pumped medium Water Clean water Not containing chemical and mechanical substances which affect the materials
More informationPUMPS STEAM TURBINES BUILDING & FIRE WASTEWATER SERVICE PUMP CLINIC 15 MECHANICAL SEAL DESIGN, OPERATION AND MAINTENANCE PROBLEMS
PUMP CLINIC 15 MECHANICAL SEAL DESIGN, OPERATION AND MAINTENANCE PROBLEMS In my seminars I teach that mechanical seals fail prematurely because: The lapped faces open A seal component becomes damaged In
More informationINDEX. BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation. STRONG POINTS 7 Basic Design Spares & Services
DREDGING PUMPS 2017 BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation STRONG POINTS 7 Basic Design Spares & Services BELL HEADS 10 Sand Production Head Flat Barge Bead
More informationSIHI prime - Side Channel Pumps Self-priming, segmental type with very low NPSH
SIHI prime - Side Channel Pumps Self-priming, segmental type with very low NPSH CEH-X 1201 3608 TECHICAL DATA Capacity: Delivery head: Speed: from 0.4 up to 7.5 m³/h from 10 up to 322 m 1450 rpm (max.
More informationData sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74.
Data sheet Page: 1 / 5 Operating data Requested flow rate 160.00 m³/h Actual flow rate 159.85 m³/h Operating data determined for maximum inlet pressure Actual developed head 20.96 m Requested developed
More informationExperiment No.3: Flow through orifice meter. Background and Theory
Experiment No.3: Flow through orifice meter Background and Theory Flow meters are used in the industry to measure the volumetric flow rate of fluids. Differential pressure type flow meters (Head flow meters)
More informationVersaFlow Vortex 100 Vortex Flow Meter Specifications
VersaFlow Vortex 100 Vortex Flow Meter Specifications 34-VF-03-05 May 2011 The All-In-One Solution The VERSAFLOW is the only vortex flowmeter with integrated and temperature compensation in 2- wire technology.
More informationCOMPUTATIONAL FLOW MODEL OF WESTFALL'S 2900 MIXER TO BE USED BY CNRL FOR BITUMEN VISCOSITY CONTROL Report R0. By Kimbal A.
COMPUTATIONAL FLOW MODEL OF WESTFALL'S 2900 MIXER TO BE USED BY CNRL FOR BITUMEN VISCOSITY CONTROL Report 412509-1R0 By Kimbal A. Hall, PE Submitted to: WESTFALL MANUFACTURING COMPANY May 2012 ALDEN RESEARCH
More informationMinuteman Vertical Pumps
Description: Condensate Pumps Type: Vertical Centrifugal Pumps Horsepower: /3 to /2 HP GPM: 0 to 37 PSIG: 0-35 Overview: vertical pumps are the workhorse of the NES pumps product offering. All minuteman
More informationIAC-15-C4.3.1 JET INDUCER FOR A TURBO PUMP OF A LIQUID ROCKET ENGINE
IAC-15-C4.3.1 JET INDUCER FOR A TURBO PUMP OF A LIQUID ROCKET ENGINE Martin Böhle Technical University Kaiserslautern, Germany, martin.boehle@mv.uni-kl.de Wolfgang Kitsche German Aerospace Center (DLR),
More informationXS8 Series. Technical Guide Submersible electropumps and motors for 8 wells
XS8 Series Technical Guide Submersible electropumps and motors for 8 wells XS8 Series t Index Sectors of application... Technical characteristics... Table of materials and identification data... 6 Hydraulic
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 2 205 PERFORMANCE CURVE 4 206 PERFORMANCE CURVE 7 207 PERFORMANCE
More information2-way and 3-way globe valves
2-way and 3-way globe valves Table of Contents Background Project planning 2 Flow characteristics 2 Principles of flow control 3 ydraulic circuits 4 Design and dimensioning Cavitation diagrams 5 Design
More informationYUTECH Infra Red Type Donnelly Chute Level Sensors and Indicating Transmitters
YUTECH Infra Red Type Donnelly Chute Level Sensors and Indicating Transmitters YU Technologies Pvt. Ltd. Registered Office: 315, A1, 22, Manishanagar, Off Sahyadrinagar, Sangli 416 416, Maharashtra, India.
More informationThe pumping action of the B series lobe displacement pump is achieved thanks to the counter-rotation of
INDUSTRY APPLICATION Rotary lobe pumps type B are positive displacement pumps for liquids of any viscosity with lubricating and non-lubricating properties. Lobe pumps are used in the chemical, pharmaceutical
More informationTopGear Internal Gear Pumps
TopGear Internal Gear Pumps TopGear When reliability is the priority Gear pumps are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from chocolate to
More informationParts Lists. Forward Series. Rev. Feb. 2017
s HSU09VHJ(DB)-G / HSU09VHJ(DB)-W HSU12VHJ(DB)-G / HSU12VHJ(DB)-W HSU18VHJ(DB)-G / HSU18VHJ(DB)-W HSU24VHJ(DB)-G / HSU24VHJ(DB)-W 1800 Valley Road Wayne, NJ 07470 Tel +973.617.1800 www.haier.com - Edition
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
More informationPRODUCT OBSOLETED 1Q16
VIKING HEAVY DUTY PUMPS FEATURES Section 6 Page 6. Issue C 9 SERIES 27 s Cutaway View (Packed Type) 60-200-280 GPM Sizes (36-45-64 m³/hr) Shown without over-pressure relief valve MECHANICAL SEAL (SERIES
More informationFILLING AND CHECK VALVE
Filling valves characteristics Size Max. Flow (l/min.) R-114 DN-32 160 Max. Press. Opening ratio 3.6:1 Decompr. ratio Min pilot pressure Max pilot pressure Min. suction opening pressure Pilot volume (cm
More informationSIHI prime - Side Channel Pumps Self-priming, segmental type
SIHI prime - Side Channel Pumps Self-priming, segmental type AKH-X 1201 3606 TECHICAL DATA Capacity: Delivery head: Speed: from 0.4 up to 7.5 m³/h from 10 up to 242 m 1450 rpm (max. 1800 rpm) Temperature:
More informationDensity Solution. TDF Series. Direct Insertion Density Meter. Characteristics
Density Solution TDF Series Direct Insertion Density Meter Xi an Tosilon Automation Co., Ltd No.299, Daqing Rd, Lianhu District, Xi'an Shaanxi, China Tel: +86-29-8823 8550 info@tosilon.com; www.tosilon.com
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
More information1 Full Year Factory Warranty SIKO PUMP
Catalogue No. SIKO-CQB-003 B A CATALOUGE FOR CQ MAG- DRIV E CEN TRIFUGAL PUMP 1 Full Year Factory Warranty Food & Beverage Mining Paints & Dyes Petrochemical Pharmaceutical Pulp & Paper Power & Energy
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
More informationGATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
More informationPUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar
/7 ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More information"A" Series Variable Displacement Piston Pumps Single Pump, Pressure Compensator Type
A"A" Series PISTON PUMPS Single Pump, Compensator Graphic Symbol M O Specifications Model s A-FRB- A-FRC/H- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- R S- A9- R S- A- R S- Geometric Displacement
More informationVERTICAL MULTI-STAGES CENTRIFUGAL PUMPS
Installation and Operating Instructions VERTICAL MULTI-STAGES CENTRIFUGAL PUMPS Models 1, 3, 5, 10, 15, 20, 32, 45, 64, 90, 120, 150 1. Model numbering and nameplate format 1.1 Model numbering Example:
More informationDosing Pump Operational Manual
Chemical Dosing Specialists Dosing Pump Operational Manual Pump Range WMPSP0110 - WMPSP0408 - WMPSP0607 - WMPSP0805 - WMPSP1204 - WMPSP1502 - WMPSP2001 1- Product Introduction 2 1.1 Product Overview 2
More informationThe Practical Pumping Handbook
The Practical Pumping Handbook by Ross Mackay ELSEVIER Contents Acknowledgements Dedication About the author xv xviii xix Centrifugal Pumps 1 1.1 The pump 1 1.2 Applications 2 1.3 Pump cases 4 1.3.1 Diffuser
More informationGauges, Sight Glasses and Vacuum Breakers
Gauges, Sight Glasses and Vacuum Breakers Gauges, Sight Glasses and Vacuum Breakers Gauges Pressure gauges Pressure gauges should be installed in at least the following situations: Upstream of a pressure
More informationMETAL PUMPS GVSO. Vertical Chemical Centrifugal Pumps One Concept for Maximum Flexibility.
METAL PUMPS GVSO Vertical Chemical Centrifugal Pumps One Concept for Maximum Flexibility. GVSO ALWAYS THE RIGHT CHOICE If you want to solve demanding pumping tasks in the industry efficiently, permanently
More informationGMZ series Slurry Pump
GMZ series Slurry Pump OPERATION MANUAL HL Mud Cleaning Equipment Co.,Ltd Contents 1. Summarizing 2. Structural Drawing 3. Technical Parameters 4. Points for attention for assembly 5. Operation 6. Care
More informationLiquid ring vacuum pumps with magnetic coupling
Liquid ring vacuum pumps with magnetic coupling LPH 75320, LPH 75330, LPH 75340 Pressure range: Suction volume flow: 33 to 1013 mbar 485 to 1615 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum
More informationINDEX. BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation. STRONG POINTS 7 Basic Design Spares & Services
DREDGING PUMPS 2016 BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation STRONG POINTS 7 Basic Design Spares & Services BELL HEADS 10 Sand production head Flat barge head
More informationParts Lists. Novel Series. Rev. Feb. 2017
s HSU09VHG(DB)-G / HSU09VHG(DB)-W HSU12VHG(DB)-G / HSU12VHG(DB)-W HSU18VHG(DB)-G / HSU18VHG(DB)-W HSU24VHG(DB)-G / HSU24VHG(DB)-W 1800 Valley Road Wayne, NJ 07470 Tel +973.617.1800 www.haier.com - Edition
More informationZS Stainless steel horizontal single stage centrifugal pump
ZS Series PRESENTATION Hydroo Pump Industries SL is an enterprise specialised in the research, development and large-scale production of Stainless Steel centrifugal pumps. We have a vertical integration
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable
More informationSubmersible Turbine Pumps
Submersible Turbine Pumps FW54 62 Supersedes NEW 5 to GPM For 5, 6, 7 and 8 inch wells High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More informationAPIFLO-M series Series
APIFLO-M series Series Horizontal Multistage Pump According to API610 Capacity: up to 650m 3 /h (50Hz) up to 780 m 3 /h (60Hz) Head: up to 1200m (50Hz) up to 1728 m (60Hz) Pressure: APIFLO-M: up to 25
More informationPumping Station. Marisa Handajani
Pumping Station Marisa Handajani Function To lift or to elevate the liquid from a lower elevation to an adequate height at which it can flow by gravity or overcome the hydrostatic head Applications: 1.
More informationDischarge rate* 2 L/min MPa (DE10-1) 37.8 MPa (DE10-7)
D VANE PUMPS D VANE PUMPS Operating pressure MPa {kgf/cm } Maximum Rated Discharge rate* L/min Permissible min Page DS DSP 7 {7} 7 {7} to D- MD Motor pumps incorporating a DSP D-4 DP DP DP DP 7. {7} 4
More informationUNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
More informationIGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
More information1.3 HIGH PRESSURE SERIES
1.3 HIGH PRESSURE SERIES content Ordering Code 1.3.1 High Pressure Series Technical Information 1.3.2 Specifications 1.3.3 Hydraulic Fluids 1.3.4 Viscosity Range 1.3.5 Temperature Range 1.3.6 Seals 1.3.7
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
More information316 Stainless Steel Submersible Pumps 8" 10" 12"
316 Stainless Steel Submersible umps 8" 10" 12" Stainless Steel Submersible umps 40 to 540 m 3 /h The FS Series pumps have been engineered in all AISI 316 stainless steel for efficient and reliable pumping
More informationEVAPORATOR ACCESSORIES
STEAM PAN > This option can be installed all types of evaporators (wood, pellet, oil). Many standard sizes available. > The use of the steam pan causes a significant reduction in energy consumption by
More informationVersaFlow Vortex 100 Vortex Flow Meter Specifications
VersaFlow Vortex 100 Vortex Flow Meter Specifications 34-VF-03-05 May 2011 The All-In-One Solution The VERSAFLOW is the only vortex flowmeter with integrated pressure and temperature compensation in 2-
More informationVIKING HEAVY DUTY PUMPS SERIES 225 AND 4225 JACKETED BRACKET, STANDARD CONSTRUCTION FEATURES
VIKING HEAVY DUTY PUMPS JACKETED BRACKET, STARD CONSTRUCTION FEATURES SERIES 5 Pumps Cutaway View 5-0-60-80-5 GPM Sizes (-7--8- m³/hr) Section Page. Issue C MECHANICAL SEAL (SERIES 5) H - LL SIZES LS -
More informationSERVICE MANUAL Moyno Mag Drive Series Motorized Pumps with Magnetic Drives 331, 332, 333, 344 MODELS
SERVICE MANUAL Moyno Mag Drive 500 300 Series Motorized Pumps with Magnetic Drives 331, 332, 333, 344 MODELS Section: Mag Drive 500 Pumps Page: 1 of 4 Date: January 2010 DESIGN FEATURES Housing: PVC or
More informationFristam Powder Mixer. Function Principle
Fristam Powder Mixer The Fristam Powder Mixer is used to dissolve or suspend powdery or liquid ingredients (e.g. sugar, milk powder, cocoa powder, thickeners, oils and liquid flavourings etc.) in a receiver
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationOperation & Maintenance Manual 4900 Series Pipeline Injection Pumps Bulletin 150
340 West Benson Avenue Grantsburg, WI 54840 1-800-366-1410 715-463-5177 www.northern-pump.com Table of Contents Introduction... 3 Rotation... 4 Hydraulic Balance... 5 Cautionary Statements... 6 Pump Installation...
More informationSEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive
SEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive SEMA-S SEMA-L with reference to DIN EN 734 SEMA-Z with reference to DIN EN 734 SEMA-Block in closed-coupled design for extremely low
More informationKAM E-IAS ELECTRIC ISOKINETIC AUTOMATIC SAMPLER
KAM E-IAS ELECTRIC ISOKINETIC AUTOMATIC SAMPLER PER API 8.2, ASTM D4177 AND ISO 3171 User Manual EIASMANUAL0718 TEL +1 713 784-0000 FAX +1 713 784-0001 Email Sales@Kam.com 3939 Ann Arbor Drive Houston,
More informationAlloy version available please call for specifications.
Alloy version available please call for specifications. 2 SEAL-LESS MAG-DRIVE PUMP SPECIALISTS From WARRENDER, Ltd. - The Leader in Magnetic Drive Pump Technology: 21st Century Design, Materials and Engineering.
More informationFREEWHEELING INSTRUCTIONS
FREEWHEELING INSTRUCTIONS Freewheeling options with SAI motors. FREEWHEELING OPTIONS WITH SAI MOTORS: Freewheeling is the operation to drive a SAI motor disconnected from the hydraulic circuit. It is a
More informationHorizontal And Vertical Centrifugal Pumps
Horizontal And Vertical Centrifugal Pumps Lip Bellow Type JP-840 Series Horizontal Centrifugal Pumps are driven by a direct-coupled motor (maximum 3,000 rpm). They are especially suitable for the rapid
More informationSPECIFY THE RIGHT HOT OIL PUMP FOR YOUR APPLICATION
SPECIFY THE RIGHT HOT OIL PUMP FOR YOUR APPLICATION Hot oil pumps are used in a range of industries, with their main user being the heat transfer oil customer. Often, oil temperatures will exceed 500 F
More informationFlow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body
Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure
More informationPlastic Repair. Characteristics This product hardens well at room temperature. Is odourless. The hard and flexible have a black colour.
Plastic Repair Bardahl Plastic Repair is a 2-component repair product that can be used in all car workshops. Arranged there where plastic and metal must be repaired. Bardahl Plastic Repair has been developed
More informationKROHNE 10/ Optimass 70 & 71 Single Tube Coriolis Mass Flowmeters for Food & Beverage Processing
KROHNE 10/02 7.02442.21.00 GR Optimass 70 & 71 Single Tube Coriolis Mass Flowmeters for Food & Beverage Processing Optimass One Tube... Optimass is a brand new family of Coriolis mass flowmeters from KROHNE.
More informationHigh-speed Centrifugal Pump according to API 610
EGS-L, EGS-W Series High-speed Centrifugal Pump according to API 610 Capacity: 2~90 m 3 /h (50Hz) 2.4~108 m 3 /h (60Hz) Head: up to 1500 m (50Hz) up to 2160 m (60Hz) Pressure: EGS-L: up to 15 MPa, EGS-W:
More informationOPTISWIRL 4070 Technical Datasheet
OPTISWIRL 4070 Technical Datasheet Vortex flowmeter Integrated pressure and temperature compensation Temperature compensation for saturated steam included as standard All OPTISWIRL versions in 2-wire technology
More informationOperation & Maintenance Manual for Northern Magnetic Drive Pumps. Operation Manual. Northern Magnetic Drive 4400 and 4600 Series
Operation Manual Northern Magnetic Drive 4400 and 4600 Series 340 West Benson Avenue Grantsburg, WI 54840 Telephone: 1-800-366-1410 715-463-5177 www.northern-pump.com Page 1 of 16 Table of Contents Cautionary
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More information5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
More informationHigh-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationCompany name: Created by: Phone: Note! Product picture may differ from actual product
Tender Text Product No.: 9848674 HYDRO MULTI-E CRE-9 Note! Product picture may differ from actual product GRUNDFOS Hydro Multi-E booster sets are designed for the transfer and pressure boosting of clean
More informationCompany name: GRUDNFOS VisMin Created by: Kimmboy Ancis Phone: Date: 13/03/2017
Position Qty. Description 1 CM5-4 S-R-I-E-AQQE Product No.: 98482185 Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The pump
More informationCompany name: Created by: Phone: Date: Note! Product picture may differ from actual product
Tender Text Product No.: 98494929 HYDRO MULTI-E 3 CME3-5 Note! Product picture may differ from actual product GRUNDFOS Hydro Multi-E booster sets are designed for the transfer and pressure boosting of
More informationSystems Operation Testing and Adjusting
M0064276 (en-us) December 2015 Systems Operation Testing and Adjusting 4008-30 Industrial Engine SD8 (Engine) Important Safety Information Most accidents that involve product operation, maintenance and
More informationMTB /158 A-F-A-BQQV 400D-2 5,5kW
GRUNDFOS DATA BOOKLET MTB 5-1/158 A-F-A-BQQV D- 5,5kW Grundfos pump 95879 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/95879/mtb-5-1-158-a-f-a-bqqv.html
More informationRegenerative Turbine Pumps
Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine
More informationMedium and high pressure pumps
Screw pumps Medium and high pressure pumps Installation and Start-up Instruction This instruction is valid for all standard high pressure pumps: E4, D4 and D6 Contents Page Pump identification 2 Installation
More informationLubricating Oil Pan
007-025 Lubricating Oil Pan Preparatory Steps Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce
More informationNote! Product picture may differ from actual product
Tender Text Phone: +234835621265 Date: 16/3/217 Product No.: 9913375 HYDRO MULTI-E 3 CRE15-4 Note! Product picture may differ from actual product GRUNDFOS Hydro Multi-E booster sets are designed for the
More informationVERTICAL CHEMICAL CENTRIFUGAL PUMP MADE FROM METAL TYPE GVSO
VERTICAL CHEMICAL CENTRIFUGAL PUMP MADE FROM METAL TYPE GVSO Applications From sulphur and sulphuric acid to molten salts. Rheinhütte PumpEN The right solution. For any fluid. GVSO: ALWAYS THE RIGHT CHOICE
More informationHygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS
Hygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS Process Equipment GEA Tuchenhagen GEA Tuchenhagen -VARIFLOW Series TPS The hygienic self-priming GEA Tuchenhagen -VARIFLOW TPS
More informationOPTISWIRL 4070 Technical Datasheet
OPTISWIRL 4070 Technical Datasheet Vortex flowmeter Integrated pressure and temperature compensation Temperature compensation for saturated steam included as standard All OPTISWIRL versions in 2-wire technology
More informationMechanical Seals OVERVIEW OF TYPES
Mechanical Seals OVERVIEW OF TYPES From our Production Range: Standard Mechanical Seals acc. to EN 12756 (DIN 24960) For more than four decades NIDEC GPM has been developing and manufacturing precision
More information4WN. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE MULTISTAGE PUMPS. Pag
CONTENTS Pag - SPECIFICATIONS 200 PUMP SPECIFICATION 200 MOTOR SPECIFICATION 201 SECELTION CHART 202-203 TYPE KEY AND CURVES SPECIFICATIONS 204-205 PERFORMANCE CURVE 1 206 PERFORMANCE CURVE 2 207 PERFORMANCE
More informationMicro Motion Insertion Density and Viscosity Meter Accessories
Product Data Sheet PS-001057, Rev. F pril 2013 Micro Motion Insertion Density and Viscosity Meter ccessories Micro Motion insertion density and viscosity meters are built to tackle the most demanding process
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationPrecision-24 Manual & Specification
Precision-24 Manual & Specification 1 Product Introduction... - 1-1.1 Product Overview... - 1-1.2 Technical Parameter...- 2-1.2.1 General Parameter...- 2-1.2.2 Performance Parameter... - 3-1.2.3 Installation
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationOil/Air Cooler Units. Compact application with AC Motor OK-ELC Type
COMPACT OIL / AIR COOLERS NEW COMPACT DESIGN WITH AC ELECTRIC FANS AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for hydraulic applications where high performance and
More informationVISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
UNIVERSL PRODUCT LINE: SERIES 724, 4724 Section 1706 Page 1706.1 Issue B TBLE OF CONTENTS Features & Benefits...2 Cutaway View & Pump Features...2 Model Number Key...3 Standard Materials of Construction...3
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y PS For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative
More informationS4G Series. Technical Guide. 4 submersible pumps
SG Series Technical Guide submersible pumps SG Series t Index Sectors of application... Technical characteristics SG... 5 Table of materials and identification data... 6 Nominal data... Hydraulic performance
More informationMTB /183 A-F-A-BQQV 400D-2 11kW
GRUNDFOS DATA BOOKLET MTB 65-2/13 A-F-A-BQQV D-2 11kW Grundfos Pump 965751 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/965751/mtb-65-2-13-a-f-a-bqqv.html
More information