13CDU PART #: 13CDUCBC1B E WITH A 1" DIAMETER LINE 13CDUCBC1B CAPSTAN DRIVE-13CDUCBC1B FILL & VENT PORT

Transcription

1 4CDU PART #: 13947

2 13CDU FILL & VENT PORT REV. DESCRIPTION DATE DRAWN APPD. 7 RELEASE DIMENSIONAL DRAWING 4/18/2016 CR L 8 REVISE LOCATION OF ITEM 26 7/6/2016 MDR L LEVEL PORT DRAIN PORT 3/4-10UNC INLET & OUTLET PORTS SAE #8 O'RING 21/32 THRU UE (IN-LS) : 13,000 AT 15 GPM : 58 ) : 3250 : 121 : ) : 1300 : 304 PART #: 13CDUCC1 E WITH A 1" DIAMETER LINE 15 GPM ER NUMER CAPSTAN DRIVE-13CDUCC1 DRAWING 13CDUCC1

3 16CDU REV. DESCRIPTION DATE DRAWN APPD. E 2 RELEASE DIMENSIONAL AND CROSS SECTIONAL DRAWING 4/18/2016 CR L 3 UMP REV TO MATCH ASSEMLY DRAWING 3/13/2017 A L FILL & VENT PORT LEVEL PORT 3/4-10UNC DRAIN PORT 21/32 THRU TORQUE (IN-LS) : 16,000 RPM AT 16 GPM (LOW) : 37 RPM AT 16 GPM (HIGH) : 75 AN: L (L )HIGH : 2000 L (L) LOW : 4000 PM) HIGH : 157 PM) LOW: 78 PART #: 16CDUCC4 EEL : L (L) HIGH : 760 L (L) LOW : 1520 INLET & OUTLET PORTS SAE #8 O'RING SOLENOID VALVE-12VDC DRAWN Y: DS DATE: 9/15/05 ER NUMER CAPSTAN DRIVE-16CDUCC4 DRAWING WT: 130 lbs 16CDUCC4 HEAT :

4 24CDU FILL & VENT PORT REV. DESCRIPTION DATE DRAWN APPD. E 2 RELEASE DIMENSIONAL AND CROSS SECTIONAK DRAWING 4/18/2016 CR L LEVEL PORT 3/4-10UNC DRAIN PORT 21/32 THRU TORQUE (IN-LS) : 16,000 RPM AT 16 GPM (LOW) : 37 RPM AT 16 GPM (HIGH) : 75 AN: L (L )HIGH : 2000 L (L) LOW : 4000 PM) HIGH : 157 PM) LOW: 78 PART #: 24CDUCC2 EEL : L (L) HIGH : 760 L (L) LOW : 1520 PM) HIGH : 412 INLET & OUTLET PORTS SAE #8 O'RING SOLENOID VALVE-12VDC CAPSTAN DRIVE-24CDUCC2 ER NUMER DRAWING 24CDUCC2 HEAT

5 12U REV. DESCRIPTION WIRE ROPE DIA. 1/2 WINCH PER DRUM LAYER CAPACI (ft.) THE RATED LINE PULLS ARE CONSULT THE WIRE ROPE M ROPE RATINGS. CALE CAPACITIES ARE IN A ACTUAL CALE CAPACITIES GREAT THAN THOSE SHOW LAST LAYER CAPACITY DOE PERFORMANCE IS ASED O STD "AT&T" EXTENSION SHAFT CAPSTAN PER MODEL MAX FLOW (gpm) RPM MAXIM FLO 12U LINE PULL/SPEED IS ASED INLET/OUTLET PORTS JIC #8 PART #: 12U8X3L1H-001 This drawing is the pro Reproduction or the di data hereon is not perm specific approval of TW UMPE ER NUMER DRAWN Y: MDR DATE: 10/12/2017 W APPD. Y: L DATE: 11/13/17 S D

6 20U PART #: 20UA93R2G-011

7 30U WF FLANGE SELECTOR DRUM / SHAFT 5.21 TYP. 20 REF REV. DESCRIPTION DATE DRAWN APPD. E 1 CREATED DRAWING 2/1/2017 A ARREL SECTION - SECTION C-C A C A C D D AT&T SHAFT SECTION A-A SECTION D-D SAE #8 PORTS OTH SIDES PERFORMANCE DATA LAYER ROPE LINE LINE CAPACITY PULL SPEED FT L FPM PART 671 #: 30UA93R2F 9* EXTENSION SHAFT PERFORMANCE Output Shaft Model Torque Speed Line Pull Line Pull in-lb rpm lb lb 30U Line Pull/Speed based on Performance is based on psi with 1/2" rope The rated line pulls are for the winch only. Consult the rope manufacturer for rope ratings. 7" Capstan 1" nonmetallic rope. 20" C.R ER NUMER UMPER-WINCH-30UA93R2F DRAWING 30UA93R2F