Toggle Switches, A Series, Part Number Matrix
|
|
|
- Baldric Willis
- 5 years ago
- Views:
Transcription
1 Toggle Switches, A Series, Part Number Matrix "A" SERIES DESIGN FEATURES Toggle Machined brass, heavy nickel plated. Bushing & Frame Rigid one-piece die cast, copper flashed, heavy nickel plated. Fixed ontact Welded construction. Terminal Seal Epoxy sealing of terminals is standard. MATERIAL SPEIFIATIONS: ontacts...gold/gold flash Silver/tin lead ase Material...Thermoset Terminal Seal...Epoxy DESIGN.50 (.5).0 (.88).0 (.559) Without Locking Ring.50 (.5) TYPIAL PERFORMANE HARATERISTIS: ontact Rating...Silver: 50 VA or 5 5 VA Silver: 0 VD Gold: VA/D max. Insulation Resistance...,000 Megohms 500 VD. Dielectric Strength...,000 Volts sea level initial Electrical Life...Up to 0,000 ycles ENVIRONMENTAL SPEIFIATIONS Operating Temperature...-4 F to + 85 F (-0 to + 85 ) Storage Temperature F to + F (-45 to + 00 ) Note: Hardware included with switch (9.09).00 (.7) (..0).4 (5.94) Without Locking Ring (.5) (.9) (.5).00 (.7).90 (4.8) (.0).40 (.0) With Standard Locking Ring.450 (.0).58 (9.09) (..0) PART NUMBERING Model Function Toggle Bushing Terminal ontact K, K: ap olor Option A A Single Pole Double Pole 0 On-On 0 On-Off-On 05 (On)-Off-(On) 07 On-Off-(On) 08 On-(On) On-On-On On-On-(On) 5 (On)-On-(On) See page for SPT wiring diagram. double pole case only S K K M P P4 T T TP Bat. Long Locking Locking Bat. Short Flatted (with Y only) Flatted (with Y only) Large Toggle & Bushing (5/) Large Toggle & Bushing (5/) Large Flatted Toggle and Bushing (5/) Z Wire Lug Q Silver A Right Angle B Gold AV Vertical Right Angle G Gold over Silver Printed ircuit Vertical V0 V40 V90 Support W Wire Wrap Quick onnect atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK: Y Y9 W D D9 H Z /4-40 threaded,.5 long, slotted unthreaded,.5 long /4-40 threaded,.7 long, actuator & bushing flange environmental seals S & M Toggles only /4-40 threaded,.8 long, slotted Unthreaded,.8 long /4-40 threaded, flanged,.0 long (Nickel Standard) 0 Black Red Note: For surface mount termination, use the TST series, Page 7 N O P U.L.(Q or G contact only) Other Options Black finish toggle, bushing and hardware. Add N to end of part number, but before U.L. option. Internal O-ring environmental actuator seal. Add letter after toggle option: S & M. Anti-Push-In/Anti rotate. Add letter after toggle S & M.
2 Toggle Switches, A Series, Options FUNTIONS The following functions available in SP or DP. 0 Positions None indicates no mechanical position On None On 0 Positions Off indicates a mechanical position with no electrical connection. On Off On 05 Positions (On) indicates momentary action. (On) Off (On) 07 Positions (On) Off On 08 Positions (On) None On, connect terminals:, connect terminals: Positions On On On Positions (On) On On 5 Positions (On) On (On) Functions available in DP case only onnect terminals: WIRING DIAGRAM FOR FUNTIONS 5 Pos. Pos. Pos. * SPT functions achieved with external jumper installed by customer Ref. Slot OUT 5 OUT 4 SINGLE POLE POSITION* JUMPER IN OUT POS. (OUT) Ref. 5 (IN) Slot 4 POS. Ref. 5 Slot 4 (OUT) (IN) Ref. Slot POS. 5 (IN) 4 (OUT) TOGGLES S Standard T Dimension L Bushing.40 (0.4) Y, H, W.480 (.9) D, D9 Large Toggle/ Bushing 5/-NS.5 (.9) "L".40 (.0).87 (7.45).448 (.8).00 (.508) M Short T Large Toggle/ Bushing.05 (.7) Dimension L "L" Bushing Type.00 Y, H, W.70 D, D9 5/-NS.40 (.0).40 (.8).448 (.8).00 No bushing option needed for T or T. (.508) atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK: P P4 Actuator Dimension A B P.450 (.4).00 P4.50 (.5).5 (4.9) K Locking.050 (.7) /4-40NS "B" Flatted Available only with Y bushing. Pinned for anti-rotation. Use N--AG dress nut for enhancement. Pg (5.44).580 (4.7) Locked.00 (.54) "A".50 (.5) Unlocked.5 (8.0) Ref TP Flatted 5/- NS Pinned for anti-rotation K Locking.050 (.7) /4-40NS.4 (.5).4 (5.44).0 (5.49) Locked.0 (5.49).40 (.5).448 (.8).00 (.508).80 (7.7) Unlocked.5 (8.0) Ref No bushing option needed for K or K K locking levers are used to prevent accidental switching and must be lifted up prior to actuation. Standard nickel finish.
3 Toggle Switches, A Series, Options BUSHINGS Y /4-40 Thread.5 long, slotted (Standard).4 (7.98) /4-40NS.08 (.7).040 (.0).80 (7.) D9 Unthreaded.8 long Used with Z, & W terminations.040 (.0).50 (.5).08 (.7).80 (7.0) H /4-40 Thread Flanged,.0 long.5 (8.00) /4-40NS.00 (.5).5 (5.7).00 (7.) D /4-40 Thread.8 long, slotted.4 (7.98).08 (.7).040 (.0).040 (.0).05 (5.).08 (.7) W Threaded Splashproof.45 (.8).5 (5.7) /4-40NS.80 (7.) Used with A, AV, V0 V80 & V90 terminations.50 (.5).80 (7.) O-Ring For S & M Toggles /4-40NS.94 (7.47).00 (.5) TERMINALS Z Wire Lug Z Quick onnect W Wire Wrap Epoxy Seal Printed ircuit Epoxy Seal (.5).078 (.98) Epoxy Seal.50 (.5).050 (.7) Epoxy Seal.047 (.9).080 (.0).078 (.98).55 (.94).0 (.57).00 (.7) Mates with 454 or (.7) "A" Single pole.07 (.85) Double pole.90 (4.8).07 (.85) 4 atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
4 Toggle Switches, A Series, Options TERMINALS A Right Angle Single Pole.048 (.) (.8) (.7).00 (.7) (.85) (.).048 (.) Note: Terminal numbers viewed from top of P.. boards (.4).5 (.8).50 (.8) (.7) (.7) (.8) (.85).00 A Right Angle Double Pole Note: Terminal numbers viewed from top of P.. boards. AV.048 (.) (.8) (7).50 (.8).050 (.7).50 (.8) (.85).00 Vertical Right Angle Single Pole Note: Terminal numbers viewed from top of P.. boards. AV.048 (.).450 (.4).450 (.4).5 (.8) (.8) 5.00 (.7).050 (.7).90 (4.8).50 (.8) (4.8).07 (.85) Dia.00 Vertical Right Angle Double Pole Note: Terminal numbers viewed from top of P.. boards. atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
5 Toggle Switches, A Series, Options TERMINALS NOTE: Terminal numbers viewed from top of P.. board V0 V40 V90 Vertical Support Bracket Single Pole.00 (.508) (5.75).00 (.7).050 (.7).5 (.8).0 (8.) A (.).0 (5.75).07 (.85).5 (.8).70 (9.40) Option ode Dim."A" V0.40 (.8) V40.0 (.00) V90.50 (9.) Vertical Support Bracket Double Pole.00 (.508) (5.75).00 (.7).048 (.).0 (8.).450 (.4) A.85.5 (.8).0 (5.75).07 (.85).5 (.8).70 (9.40).07 (.85) Option ode Dim."A" V0.40 (.8) V40.0 (.00) V90.50 (9.) ONTATS ONTATS: opper alloy with B gold plate, welded button. TERMINALS: Brass with gold plate. ELETRIAL RATING: VA/D. Q ONTATS: opper alloy with silver, welded button. TERMINALS: Brass with tin/lead plate. ELETRIAL RATING: 5 5 VA, 50 VA, 0 VD. UL/SA RATING: 5 VA, A@ 50 VA. (Specify UL option code) G ONTATS: opper alloy with gold plate over silver, welded button. TERMINALS: Brass alloy, with gold plate. ELETRIAL RATING: O.4 0 VA/D or 5 5 VA, 50 VA, 0 VD. Note: This contact option can be used for low-level or power switching. If level is above VA/D, the switch is rendered usable only for power switching due to arcremoval of gold plate. UL/SA RATING: 5 VA, 50 VA (Specify UL option code) atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
6 * Refer to Pages - for Toggle Switches, A Series, Vertical, Wire Lug, Long Bat Actuator SEE PAGE FOR PRODUT SPEIFIATIONS A0SYZQ On None On A0SYZQ 5 On Off On A05SYZQ 5 (On) Off (On) A07SYZQ 5 On Off (On) A08SYZQ On None (On) Gold ontacts A0SYZB On None On A0SYZB 5 On Off On A05SYZB 5 (On) Off (On) A07SYZB 5 On Off (On) 5. (8.40).40 REF. (0.4).50 (8.90).58 (9.09) /4-40 NS.8 EPOXY (.00).55 (.94) (0.7).5 (.70) (.05) A0SYZQ A0SYZQ On None On A0SYZQ On Off On A05SYZQ (On) Off (On) A07SYZQ On Off (On) A08SYZQ On None (On) ASYZQ SPT On On On ASYZQ SPT On On (On) A5SYZQ SPT (On) On (On) 5. REF (0.4)(8.90) /4-40 THREAD.58 (9.09).00 (.5).55 (.94).00 (0.7) (.0).08 (0.7).050 (.7).450 (.4) (4.8).040 (.0) A0SYZQ atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
7 * Refer to Pages - for Toggle Switches, A Series, P Terminals, Long Bat Actuators SEE PAGE FOR PRODUT SPEIFIATIONS / A0SYAB Horizontal Actuation.048 (.) (.) (5.).00 (0.7) (.50). (.0).8 (.00).8 (.00).40 (0.4). (8.7) REF. /4-40 NS.40 (0.4).58 (9.0).500 (.7).0 (0.40) (.8).050 (.7) EPOXY.050 (.7).85.0 (0.80) (.0) (.85) (.80) (.85) Gold ontacts A0SYAB On None On A0SYAB 5 On Off On A0SYAB On None On A08SYAB On None (On) /.5 (.70) (4.50) REF (0.4)(9.09).48 (.0) (.85).8 (.00) /4-40 NS EPOXY.00 (0.7).080 (.05).85 A0SYB.45 (.50) (4.50) REF (0.4)(9.09).48 (.0) (.7) (.85) A0SYB.8 (.00) /4-40 NS EPOXY.00 (0.7).040 (.00) 4.90 (4.8).85 Gold ontacts A0SYB On None On A0SYB 5 On Off On A08SYB On None (On) A0SYB On None On A0SYB On Off On A08SYB On None (On) 8 atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
8 Toggle Switches, A Series, Wire Wrap or Wire Lug, Long Bat Actuators * Refer to Pages - for SEE PAGE FOR PRODUT SPEIFIATIONS.5 (.70).45 (.50) (8.44).40 REF. (0.4).50 (8.90) /4-40 NS.8 (.00).58 (9.09) EPOXY. (8.44).40 REF. (0.4).50 (8.90) /4-40 NS.8 (.00).58 (9.09) EPOXY.750 (9.05).750 (9.05) (0.7) (0.7).080 (.0).080 (.05).90 (4.8).040 (.0) / A0SYWQ A0SYWQ On None On A0SYWQ 5 On Off On A0SYWQ On None On A0SYWQ On Off On A0SYWQ.5 (.70) (.9) REF (7.0) (9.09).480 (.9).55 (.94).85 /.8 /4-40 NS EPOXY (.00).00 (0.80).080 (.0).45 (.50) (.9) REF (7.0) (9.09).480 (.9).55 (.94) (.00).080 (.0) A0SDZQ.8 (.00) /4-40 NS EPOXY.00 (0.7) A0SDZQ On None On A0SDZQ 5 On Off On A0SDZQ On None On A0SDZQ On Off On A0SDZQ atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
9 * Refer to Pages - for Toggle Switches, A Series, P Tail, Straight or Right Angle, Long Bat Actuator SEE PAGE FOR PRODUT SPEIFIATIONS EPOXY A0SDQ (.50).040 (.0).08 (0.7) (.9) (7.)(9.09) /4-40 NS /4-40 NS EPOXY.00 (0.7).55 (.94).85 ( (0.7).050 (.).050 (.7) (.9).80 (7.).58 (9.09) (.94) (.00) A0SDQ A0SDQ On None On A0SDQ 5 On Off On A0SDQ On None On A0SDQ On Off On A08SDQ On None (On) / (5.) (.) (0.7).480 (.9).80 (7.) (.7).85 A0SD9AQ Horizontal Actuation.5 (.40).048 (.) (.50).8 (.00).480 (.9).87 (7.0). (8.) Ref..0 (.40) (.7).50 (.8).0 (0.80).040 (.00).85 A0SD9AQ Horizontal Actuation Alcoswitch Alcoswitch Type Act. ode P. M5 Gold ontacts A0SD9AQ A0SD9AB On None On A0SD9AQ A0SD9AB 5 On Off On A08SD9AQ On None (On) A0SD9AQ A0SD9AB On None On A08SD9AQ A08SD9AB On None (On) 0 atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
10 * Refer to Pages - for.048 (.).048 (.) 5 Toggle Switches, A Series, Vertical, Right Angle, Long Bat Actuator (.9) (7.).50 (.8).00 (0.7).5 (.8).70 SEE PAGE FOR PRODUT SPEIFIATIONS (.).50 (.8) (.00) (8.7) (.8) (.50) (.00).0 (0.40).480 (.9).87 (7.0).500 EPOXY.5 (.8).00 (0.7).50 (.8).050 (.7) (.85).90 (4.8).07 (.85).00 A0SD9AVQ Vertical Actuation A0SD9AVQ Vertical Actuation A0SD9AVQ On None On A0SD9AVQ 5 On Off On A0SD9AVQ On None On A0SD9AVQ On Off On A08SD9AVQ On None (On) Toggle Switches, A Series, Wire Lug, Locking Toggle.70 /4-40 NS.050 (.7) (.0) (0.7) (.50).8 (.00).580 (4.7) Locked (4.7) Locked.50 (.5) Unlocked.50 (.5) Unlocked.5 (8.00) /4-40 NS.58 (9.09).050 (.7).5 (8.00).58 (4.00) Ref (.00).080 (.00) A0KZQ.5 (8.00).58 (9.09).00 (0.7).89 A0KZQ Alcoswitch Type Act. ode P. M A0KZQ On None On A0KZQ 5 On Off On Alcoswitch Gold ontacts Alcoswitch Type Act. ode P. M5 A0KZB A0KZQ On None On A0KZB A0KZQ On Off On A05KZB A05KZQ (On) Off (On) AKZB AKZQ SPT On On On atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
11 * Refer to Pages - for SEE PAGE FOR PRODUT SPEIFIATIONS Toggle Switches, A Series, Right Angle, Short Bat Actuators A0MD9AQ Horizontal Actuation A0MD9AQ Horizontal Actuation.048 (.).048 (.) (0.7).05 (5.) (.5).80 (7.) (.7).85.5 (.8) (.85).00 Alcoswitch Alcoswitch Type Act. ode P. M5 Gold ontacts A0MD9AQ A0MD9AB On None On A0MD9AQ A0MD9AB 5 On Off On A08MD9AQ A08MD9AB On None (On) (5.).00 (0.7) (7.) (.7).50 (.8) (.0) (.8).07 (.85) Alcoswitch Alcoswitch Type Act. ode P. M5 Gold ontacts A0MD9AQ A0MD9AB On None On A0MD9AB On Off On A0MD9AVQ Vertical Actuation.048 (.).040 (.0) (.). (.0).5 (.40) (.70).90 (.0) Ref..0 (0.40) (7.0).50 (.8).0 (0.8).5 (.8).050 (.).50 (.8) (.85).00 A0MD9AVAQ Vertical Actuation.45 (.50).048 (.).040 (.0) Alcoswitch Alcoswitch Type Act. ode P. M5 Gold ontacts A0MD9AVQ A0MD9AVB On None On A0MD9AVQ A0MD9AVB 5 On Off On A08MD9AVQ On None (On).5 (.40) (.70).90 (.0) Ref. Alcoswitch Alcoswitch Type Act. ode P. M5 Gold ontacts A0MD9AVQ A0MD9AVB On None On A0MD9AVQ A0MD9AVB On Off On A08MD9AVQ A08MD9AVB On None (On) atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK: (7.0).0 (0.40) (.8).5 (.8) (0.8).050 (.) (.8) (4.8) (.85)
12 * Refer to Pages - for Toggle Switches, A Series, Vertical, Wire Lug, Flat or Long Bat Actuator SEE PAGE FOR PRODUT SPEIFIATIONS (.0).09 (0.74) 5 /4-40 NS (0.80).080 (.0) A0PYZQ On None On A0PYZQ 5 On Off On A05PYZQ 5 (On) Off (On) A07PYZQ 5 On Off (On) A08PYZQ On None (On).450 (.4).50 (8.89).45 (.50).58 (9.09).55 (.94).450 (.4).54 (9.) Ref. /4-40NS.55 (.94).040 (.00).080 (.0) A0PYZQ A0PYZQ On None On A0PYZQ On Off On A05PYZQ (On) Off (On) A07PYZQ On Off (On) A08PYZQ On None (On) APYZQ SPT On On On A5PYZQ SPT (On) On (On) (.50).47 (8.80).58 (9.09) (0.80).90 A0PYZQ.5 (.70) (.05) A0TZQ On None On A0TZQ 5 On Off On 5.87 (7.45) 5/- NS (.89) (9.09) Epoxy Seal.55 (.84) (0.80).080 (.00) A0TZQ.455 (.55).87 (7.45) (.89) (9.09).55 (.94).040 (.00).080 (.0) A0TZQ On None On A0TZQ On Off On ATZQ SPT On On On 5/- NS Epoxy Seal.00 (0.80).85 A0TZQ atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
13 * Refer to Pages - for SEE PAGE FOR PRODUT SPEIFIATIONS Toggle Switches, A Series, Wire Lug, 5/ Bushing, Short Bat Actuator A0TZQ.5 (.70) (.05) 5.40 (.8).48 (.89) 5/ NS.58 (9.09).55 (.94) (0.80).080 (.00) A0TZQ On None On A0TZQ 5 On Off On A05TZQ 5 (On) Off (On) A08TZQ On None (On).8 (.05).40 (.8) (.89) (9.09) (.00) (.94) (.0) A0TZQ / NS.00 (0.80) A0TZQ On None On A0TZQ On Off On A05TZQ (On) Off (On) A07TZQ On Off (On) A08TZQ On None (On) ATZQ SPT On On On 4 atalog 0890 Dimensions are in inches Dimensions are shown for USA: South America: Issued 9-04 and millimeters unless otherwise reference purposes only. anada: Hong Kong: specified. Values in parentheses Specifications subject Mexico: Japan: or brackets are metric equivalents. to change.. America: UK:
General Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
General Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
Distributed by: www.jameco.com -800-8- The content and copyrights of the attached material are the property of its owner. FUNTIONS The following functions available in SP or DP. Toggle Switches, E Series,
TYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
General Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
C&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES
FEATURES Dry circuit through power ratings. ompact size SPST momentary and alternate action models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPEIFIATIONS
.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
General Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
C&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
7000 SERIES ROCKER AND PADDLE SWITCHES Overview
Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right
General Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
SERIES 34A Miniature Toggle Switches
DIP Switches Toggle Switches Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations
SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
TYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
.138 (3.50).024 (0.60) .370 (9.40) .185 (4.70) TYP. EPOXY SEAL.030 (0.80) .083 (2.11).740 (18.7) TYP. Standard Paddle Color - (Black) EPOXY SEAL
The Gemini Series "" Series Paddles Refer to Pages -7 For dditional Options MTRIL SPCIFICTIONS: Contacts/Terminals... Gold/gold flash Silver/tin lead Case Material... Thermoset 9V-0 ctuator Material...
4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches
.7 ontents Description Product Selection...................... Technical Data and Specifications.......... Dimensions........................... Page V-T-8 V-T-9 V-T-9 Product Description One-Hole Panel
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
Snap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
General Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
ET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
General Specifications
Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive
ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
Distinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
G Series Instrument Grade Miniature Slide Switches
SPCIFICATIONS Contact ratings: Gold; 0.4 Volt-Amps (VA) max. at 20 V max. (AC or DC) Silver; 4 A at 125 VAC,2 A at 250 VAC or 3 A at 30 VDC Initial contact resistance: 10 milliohms max. Insulation resistance:
T Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINIATURE TOGGLE SWITCHES K FEATURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
C&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
C&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
5000 SERIES - MINIATURE TOGGLE SWITCHES
000 SERES - MNATURE TOGGLE SWTCHES A SPECFCATONS SUBJECT TO CHANGE WTHOUT NOTCE FEATURES Broadest selection offered in miniature switches. SPDT, DPDT, PDT & PDT models with numerous options. Numerous configurations
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
T101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.
T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you
DOWN Position. Base Circuit See Page V11-T4-35. (Keyway) 1PST ON NONE OFF A (8.74) (11.91)
. Toggle Switches General Purpose Toggles Rated Product Selection Rated Toggle SwitchesSingle-Pole Rating 6, 5 Vac, 50 Vac 0, 50 Vac / hp, 50 Vac 5, 5 Vac 0, 50 Vac / hp, 50 Vac / hp, 5V Vac 5, 5 Vac 0,
Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
T80-T Miniature Toggle Switches Compliant
T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial
General Specifications
Series CK High Security Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 3A @ 50V AC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
Y Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
Contents Pushbuttons. AB Series...C6 0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC
ontents Pushbuttons B Series... 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P BB Series... ntistatic; 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P DB Series...
5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview
600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6
General Specifications
Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation
Miniature Switches. Rocker, Toggle, Pushbutton & Slide
Worldwide Headquarters Carling Technologies, Inc., Connecticut, USA (860) 793-928, fax: (860) 793-923 e-mail: sales@carlingtech.com Eastern U.S. and Eastern Canada: (860)586-843, fax: (860) 586-853 e-mail:
Distinctive Characteristics
Distinctive Characteristics High insulating material for 6mm CKM models withstands over 5 kilovolts of electrostatic discharge, thus providing antistatic feature. Rugged, die cast housing 9mm CKL models
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
Pushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
General Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
C&K EP Series Sealed Tiny Pushbutton Switches
Models Available Features/enefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available Typical Applications
RoHS ON - OFF. ON - OFF (momentary ON) ON - OFF. (momentary OFF) ON - ON ON - ON. (momentary 1 side) ON - OFF - ON µ. (momentary 1 side)
900 Metal Lever Switches 6A 50Vac Metal lever switches Ratings up to 0A, 77V ac Single and double pole hoice of circuits including position and momentary 6.mm and solder terminals Guard option 6(4)A 50Vac
Series 47B: Sealed Miniature Rocker and Paddle Switches
Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
RTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
2M Series Sub-Miniature Toggle Switches
M Series Sub-Miniature Toggle Switches SPECIFICATIS CTACT RATING: Dependent upon contact material See Page 8. MECHANICAL LIFE: 0,000 make-and-break cycles. CTACT RESISTANCE: 0 m max. initial @ -VDC 00mA
Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless