LIFT TRUCK SPECIFICATIONS
|
|
|
- Paulina Cannon
- 5 years ago
- Views:
Transcription
1 LIFT TRUCK SPECIFICATIONS RT50 2-Wheel Drive 4-Wheel Drive RT60 2-Wheel Drive 4-Wheel Drive RT80 2-Wheel Drive 4-Wheel Drive
2 TABLE OF CONTENTS RT50 / RT60 / RT80 2-WD / 4WD Specifications / Dimensions. 1 Shipping Heights Mast Performance & Capacity Table Specifications Drawbar Pull / Gradeability / Travel Speeds... 4 Front View / Visibility (Photo) 5 Right Angle Photo with Optional Turf Tires / Strobe & Floodlights.. 6 Component Specifications Side View / Basic Unit. 10 Line of Sight Specifications Recommended Spare Parts List. 13 Front / Side View of RT60 with Optional Harris Cab & Full Free Triple Mast with Shaft Type Sideshift Carriage Table of Contents
3 RT50 / RT60 / RT80 2-WD / 4-WD DIMENSIONAL DATA mm 48 ( ( (3810 mm) Truck under clearances: Mast 11.5 (292 mm) Drive Axle 17.5 (445 mm) Center of Wheel Base 16 (407 mm) First Step 20 (508 mm) Counterweight: Lowest Point 11.5 (292 mm) 10 degrees back tilt 45 degrees forward tilt (1207 mmmm) 97.5 (2477 mm) ( x 25 Drive Tires 93 (237 mm) Wheel Base 93 (237 mm) Wheel Base Length to Fork Face 150 (3810 mm) 14 x 17.5 Steer Tires -Tab 4-1-
4 SHIPPING HEIGHTS 45 Degree A Dimension B Dimension Overhead Guard Forward Tilt Dimension Model Mast in mm in mm in mm RT Stage 76.4 / / / RT Stage 87.7 / / / RT Stage 98.9 / / / RT60/ Stage 84.2 / / / RT60/ Stage 92.7 / / / RT60/ Stage / / / RT60/ Stage 78.7 / / / RT60/ Stage 90.1 / / / RT60/ Stage / / / RT60/ Stage / / / RT60/ Stage / / / A Height measured from Top Overhead Guard (tilted 45 degrees) to ground. B Length of unit measured from Back of Counterweight to Front of Mast (tilted 45 degrees). -Tab 4-2- Subject to Change without Notice
5 MAST PERFORMANCE & CAPACITY TABLE Model Mast MFH Mast OAL Mast Wheel Weight Capacity in (mm) in (mm) Stages Drive Approx. lbs. (kg) RT Stage 2-WD 11,174 5,000 (2500) Stage 2-WD 11,324 5,000 (2500) Stage 2-WD 11,475 5,000 (2500) Stage 2-WD 12,680 4,200 (2100) Stage 2-WD 12,825 3,500 (1750) Stage 2-WD 13,109 3,000 (1500) RT Stage 4-WD 11,494 5,000 (2500) Stage 4-WD 11,644 5,000 (2500) Stage 4-WD 11,795 5,000 (2500) Stage 4-WD 13,000 4,200 (2100) Stage 4-WD 13,145 3,500 (1750) Stage 4-WD 13,429 3,000 (1500) RT Stage 2-WD 12,817 6,000 (3000) Stage 2-WD 12,968 6,000 (3000) Stage 2-WD 13,124 6,000 (3000) Stage 2-WD 13,750 5,200 (2600) Stage 2-WD 14,075 5,000 (2500) Stage 2-WD 14,400 4,400 (2200) RT Stage 4-WD 13,137 6,000 (3000) Stage 4-WD 13,288 6,000 (3000) Stage 4-WD 13,444 6,000 (3000) Stage 4-WD 14,070 5,200 (2600) Stage 4-WD 14,395 5,000 (2500) Stage 4-WD 14,720 4,400 (2200) RT Stage 2-WD 14,713 8,000 (4000) Stage 2-WD 14,864 8,000 (4000) Stage 2-WD 15,020 8,000 (4000) Stage 2-WD 15,646 7,500 (3750) Stage 2-WD 15,971 6,800 (3400) Stage 2-WD 16,296 6,200 (3100) Stage 2-WD 16,654 5,000 (2500) Stage 2-WD 17,028 3,300 (1650) RT Stage 4-WD 15,033 8,000 (4000) Stage 4-WD 15,184 8,000 (4000) Stage 4-WD 15,340 8,000 (4000) Stage 4-WD 15,966 7,500 (3750) Stage 4-WD 16,291 6,800 (3400) Stage 4-WD 16,616 6,200 (3100) Stage 4-WD 16,974 5,000 (2500) Stage 4-WD 17,348 3,300 (1650) Note: Any changes to Forklift such as Mast, Carriage, Forks (other than the Standard) and Attachments Requires a new Capacity Plate from the manufacturer. Reference ASME B56.6A-1994 Part II Tab 4-3 -
6 RT50 / 60 /80 2-WD & 4-WD SPECIFICATIONS RT DRAWBAR PULL (2-WD / 4-WD) Gear lbs. F rom 1 13,750 Test 2 9,160 Calculated 3 4,860 Calculated 4 2,650 Calculated RT GRADEABILITY (2-WD / 4-WD) Gear Grade 1 67% 2 46% 3 24% 4 15% TOP RT TRAVEL SPEEDS (2-WD / 4-WD) Gear mph Compartment or System REFILL CAPACITIES Measures Quarts / Gallons Metric Radiator / Cooling System 3 quarts (2.9 liters). Brake System 1.26 quarts (1.2 liters). Engine Crankcase with filter 10 quarts (9.5 liters). Hydraulic & Power Steering System 26 gallons (98 liters). Transmission 3.17 gallons (12 liters). Drive Axle 6.07 gallons (23 liters). Steer Axle 3.5 gallons (13 liters). Drive and Steer Hubs 0.5 gallons (1.9 liters). Fuel Tank 26 gallons (98 liters) Subject to Change without Notice -Tab 4-4-
7 -Tab 4-5-
8 COMPONENT SPECIFICATIONS RT50 2WD with optional Turf Tires, Floodlights & Strobe Subject to Change without Notice -Tab 4-6-
9 MODELS - RT50, RT60 AND RT80 VEHICLE SPECIFICATIONS DRIVE OPTIONS - MAST / CARRIAGE - 2- and 4-Wheel Drive 2- or 3-Stage with Dual Cylinders, Dual Chains FREE LIFT - SIDE SHIFT- 2- or 3-Stage Masts have 12 Free Lift Entire Mast Side Shifts LIFT CAPACITY - RT50: 5,000 lbs. (168 2-Stage Mast) RT60: 6,000 lbs. RT80: 8,000 lbs. Model Horsepower Low Idle High Idle Displacement in Net Engine HP - 82 HP Maximum Net Torque ft/lbs. Thermo. - Shut Off ENGINE Perkins 1104C-44 diesel, 4-Cylinder / Tier II Compliant rpm SAE Net 1,400 RPM 209 ft. lbs. 800 rpm 2200 rpm Caution: Do not tamper with High Idle rpm Setting! Doing so will void Perkins Engine Warranty! Transmission - Manual 4-Speed Forward / Reverse TRANSMISSION CHASSIS Chassis - Welded Monocoque design ELECTRICAL ELECTRICAL - 12 Volt system / Alternator Rating - 65 amp hours 150 AMP HR. 80 degrees f degrees f degrees f. Note: Battery Box Dimensions 7.5 Wide x 13.2 Length Floodlight Wattage 55 watts -Tab 4-7- Subject to Change without Notice
10 SERVICE BRAKES SERVICE BRAKES - Self adjusting oil-cooled five-plate disk; Multi-plate / mineral oil immersed PARKING BRAKE PARKING BRAKE - Drive line disk brake, lever operated HYDRAULIC SYSTEM HYDRAULIC SYSTEM - Open loop gear pump rpm Main Relief Valve Setting 3,000 psi Full Flow Filtration, Filter Surface Area 476 in2 / Hydraulic Oil Filter 10 microns HYDRAULIC PUMP Beam Type / Sunstrand Liters per Minute (Flow) - 40 liters/minute (25 liters/minute RT50 ONLY) SIDE SHIFT Left / 3.8 Right STEER AXLE OSCILLATION - 18 TRAVEL SPEED - 18 mph GENERAL INFORMATION STEERING WHEEL ROTATION - 4 Turns Right / 5 Turns Left (Turns Lock to Lock) HYDRAULIC SYSTEM PRESSURES Pump Capacity rpm System Pressure - 3,000 psi Steering Circuit - 1,800 psi maximum Mast Circuit - 3,000 psi maximum VEHICLE DIMENSIONS AND WEIGHTS HYDRAULIC SYSTEM PRESSURES OVERALL DIMENSIONS Width 88 Length to Fork Face 150 Load Moment Constant (from center of front axle to fork face) 32.5 Height to Top of Overhead Guard 97.5 Seat Height 49 Head Clearance 47.5 Subject to Change without Notice -Tab 4-8
11 GROUND CLEARANCE At Center of Wheel Base - 16 Drive Axle At Lowest Point First Step - 20 WHEEL BASE - 93 TIRES Drive x 25 Steer - 14 x 17.5 Manufacturer Goodyear Manufacturer Goodyear Construction Bias Nylon Cord Construction Bias Nylon Cord Ply Rating 12 Ply Ply Rating 8 Ply STEERING STEERING - Hydrostatic Power Steering Double Acting Bore mm Rod Diameter mm Stroke mm MAST MAST FUNCTIONS Type Circuit Open Loop, Manual Operation Maximum System Pressure kpa CYLINDERS Lift Single Acting MAST TILT MAST TILT - 8 Degrees Forward / 10 Degrees Back (Tilt bypass allows Tilt to 45 Degrees for Transporting RT) Double Acting Bore mm Rod Diameter mm Stoke mm RIGHT ANGLE STACKING Basic minimum aisle for Right Angle Stacking (plus load length): 2-Wheel Drive Wheel Drive Tab 4-9- Subject to Change without Notice
12 RT80 2-Wheel Drive -Tab 4-10-
13 P.N Stage P.N Stage P.N Stage P.N Stage P.N Stage P.N Stage RT50 2 / 4 WD Visibility Chart -Tab 4-11-
14 P.N Stage P.N Stage P.N Stage P.N Stage P.N Stage P.N Stage P.N Stage P.N Stage RT60 / 80 2 / 4 WD Visibility Chart -Tab 4-12-
15 RECOMMENDED SPARE PARTS LIST Part Number Description Quantity BATTERY - 12V FILTER - HYD FILTER - TRANS 1 EP FILTER - ENGINE OIL FILTER - AIR - PRIMARY FILTER - AIR - SECONDARY FILTER - FUEL BELT FAN HOSE - LOWER RADIATOR (LARGE) HOSE - LOWER RADIATOR (4 EXIT) HOSE - UPPER RADIATOR TEMP SWITCH - ENGINE COOLANT TEMP SWITCH - TRANS OIL PRESSURE SWITCH - TRANS OIL 1 6T1546 PRESSURE SWITCH - ENGINE OIL SWITCH - PARKING BRAKE KIT - PARKING BRAKE PADS THERMOSTAT THERMOSTAT O-RING RELAY FUSE - 10A FUSE - 15A BULB - FLOODLIGHT BULB - BRAKE & TURN 4 EP SIDESHIFT CYL SEAL KIT LIFT CYL SEAL KIT (168 2-Stage) STEER CYL SEAL KIT 1 EP TILT CYL SEAL KIT MAST MOUNTING PIN BUSHING KIT - CONTROL VALVE SEALS (SECT.) KIT - CONTROL VALVE SEALS (SPG/CAP.) KIT - CONTROL VALVE SEALS (COMPL.) KIT - CONTROL VALVE SEALS (CHECK.) ACTUATOR - CONTROL VALVE DRAW LATCH HOOD CAP - RESERVOIR TANK SHIMS - CHANNEL ROLLER SHIMS - CHANNEL ROLLER SHIMS - SIDE THRUST ROLLER SHIMS - SIDE THRUST ROLLER SHIMS - SIDE THRUST ROLLER SHIMS - CARRIAGE WEAR PAD THRUST WASHER - MAST SIDESHIFT TILT LIMIT CONTROL VALVE TRANS VALVE SOLENOID ALTERNATOR 1 -Tab 4-13-
16 Right Angle View of RT60 2-Wheel Drive with Optional Harris Cab and Full Free Triple Mast & Side shift Carriage NOTES: - Tab
17 Rear Angle View of RT60 2-Wheel Drive With Optional Harris Cab, Full Free Triple Mast and Side shift Carriage NOTES: -Tab
18 Side View of RT60 2-Wheel Drive with Optional Harris Cab, Full Free Triple Mast and Side shift Carriage NOTES: - Tab
19 Notes: -Tab 4-17-
20 Notes: -Tab 4-18-
21 Notes: -Tab 4-19-
22 Powered by TCPDF (
TRAILER MATE SPECIFICATIONS
TRAILER MATE SPECIFICATIONS TM50 2-Wheel Drive 3-Wheel Drive TABLE OF CONTENTS TM50 2-WD / 3-WD Specifications / Dimensions. 1 General Specifications.... 2 Weights / Travel Speed / Tilt Table Degrees /
LIFT TRUCK SPECIFICATIONS
LIFT TRUCK SPECIFICATIONS TABLE OF CONTENTS R-Series General Specifications... 1-3 R40 / R50 / RC60 Specifications.. 4 Dimensions.... 5 Tables.... 6-10 RC60 Low Profile Arrangement.. 11 RC60 Low Profile
IC-35-D. Engineering Spec. Page 1 of 8 Date: June 2006
Engineering Spec IC-35-D Page 1 of 8 Replaces: Form HD14D Dated: May 24 BMC s IC-35-2D is a Self-Propelled Industrial Crane designed for in-plant lifting and material handling applications. It has special
IC-20-G. Engineering Spec. View thousands of Crane Specifications on FreeCraneSpecs.com. Page 1 of 7 Date: June 2006
Engineering Spec IC-20-G Page 1 of 7 Replaces: Form BD104G Dated: May 2004 The IC-20-1G is a self-propelled industrial crane designed for in-plant lifting and material handling applications. It is powered
Taylor Big Red THC Series Cushion Tire Lift Trucks
Taylor Big Red THC Series Cushion Tire Lift Trucks THC-300S THC-400L Features: Hydrostat Transmission and LP Engine options are available on some models Cummins Turbocharged diesel engines are standard
15,500 lb Capacity Diesel Pneumatic Tire Lift Truck
15,500 lb Capacity Diesel Pneumatic Tire Lift Truck XX More Power To You Count on rugged Cat lift trucks for the high performance, dependability, and comfort you need to sustain productivity and maximize
FGC35K-FGC70K 7,000 15,500 LB CAPACITY CUSHION TIRE FORKLIFT
BUILT TO PERFORM IN DEMANDING APPLICATIONS. FGC35K-FGC70K 7,000 15,500 LB CAPACITY CUSHION TIRE FORKLIFT 1. Comfortable Enhanced Ergonomics From the full-suspension seat to its full tilt steering column,
7 - S E R I E S P N E U M A T I C 3, ,5 0 0 L B S S P E C I F I C A T I O N S
7 - S E R I E S P N E U M A T I C 3, 0 0 0 -,5 0 0 L B S S P E C I F I C A T I O N S SAFETY CARB/EPA certified engine with 3-way Key lowering interlock Electric horn closed loop catalytic muffler system
S40-70FT SERIES TECHNICAL GUIDE
S40-70FT SERIES TECHNICAL GUIDE WWW.HYSTER.COM S40-70FT DIMENSIONS 21 17 36.7 (929) 36.0 (914) 24 5 Forward 5 Back MODEL LIFT CAPACITY LOAD CENTER lb (kg) in (mm) in (mm) percent S40FT 4000 (1814) 24 (610)
HIGH-CAPACITY IC PNEUMATIC
HIGH-CAPACITY IC PNEUMATIC 22000 72000 LBS. REACH NEW S SPECIFICATIONS THD2200-7200 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC PNEUMATIC CAPACITY 22000 72000
CX50 Pneumatic. 8,000 thru 11,000 lbs. Capacity. Preliminary Specifications
CX50 Pneumatic 8,000 thru 11,000 lbs. Capacity Preliminary Specifications CX50 Pneumatic Series 8,000 lb. Capacity GENERAL FG40ZTU-10 FD40ZTU-10 Power Type 1 LPG Diesel Operation Type 2 Sit-Down Sit-Down
TXB-250M PRODUCT LINE WHEELBASE & CAPACITIES. (30,000-lb. Cap. at 24" L.C., 140" WB)
PRODUCT LINE WHEELBASE & CAPACITIES TXB-180S TXB-200S TXB-250M TXB-300L (18,000-lb. Cap. at 24" L.C., 110" WB) (20,000-lb. Cap. at 24" L.C., 110" WB) (25,000-lb. Cap. at 24" L.C., 121" WB) (30,000-lb.
LX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm
S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40
555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)
555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements
HIGH-CAPACITY IC PNEUMATIC
HIGH-CAPACITY IC PNEUMATIC 22000 72000 LBS. REACH NEW S SPECIFICATIONS THD 2200 7200 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC PNEUMATIC CAPACITY 22000 72000
Technical Specifications
140 Motor Grader Technical Specifications Engine Engine Model Cat C9.3 Net Power ISO 9249/SAE J1349 186 kw 250 hp Net Power EEC 80/1269 186 kw 250 hp Net Power All-Wheel Drive (AWD) 201 kw 270 hp VHP Plus
S P E C I F I C A T I O N S
S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m
BRAKES BRAKE SWITCH PARK LEVER (LT-) PISTON ORING LARGE PISTON ORING SMALL BRAKE LINE ADAPTER COOLING RESERVOIR BRACKET
DOOSAN COMMON PARTS MODEL: D20/25/30/33S-5 D35C-5 SERIAL: LR / LS / LT ENGINE = CUMMINS (B3.3 TIER III) SERIAL NUMBER INFO PREFIX MODEL ENGINE FUEL/TRANS BRAKE LR D20/25S-5 CUMMINS B3.3 DIESEL OCDB LS
Property of American Airlines
MH Utility Vehicle Section 3 SECTION 3: SPECIFICATIONS AND CAPABILITIES A. DIMENSIONS 1. Length, Excluding Coupler... 153 inches (389 cm) 2. Width, Overall... 78 inches (198 cm) 3. Height, Overall... 78
PS360C. Pneumatic Tire Compactor. Cat 3054C Turbocharged Diesel Engine. Courtesy of Machine.Market
PS36C Pneumatic Tire Compactor Cat 354C Turbocharged Diesel Engine Gross Power 98 kw Maximum Operating Weight 25 kg Rolling Width 2.28 m 13 hp 55,115 lb 7' 6" Reliability and Versatility You Can Depend
C-5 SERIES. Profile Sheet. IC Pneumatic Tire
C-5 SERIES Profile Sheet IC Pneumatic Tire 42.9" 33 5 8 * Soft Cab top increases OVHG Height.65" 7 *86" -40, -50 *87" -60, -65 6 0 34.0" 32 9 4 Powertrain Chassis Dimensions General Information Manufacturer
DIESEL FORKLIFT TRUCKS
RATED OUTPUT Gross: 129 kw 173 HP / 2200 min-1 Net: 122 kw 164 HP / 2200 min-1 Gross: 165 kw 221 HP / 2200 min-1 Net: 154 kw 207 HP / 2200 min-1 CAPACITY - 25000 FD 250 DIESEL FORKLIFT TRUCKS Photos may
S530 SKID-STEER LOADER SPECIFICATIONS
Loader Dimensions S530 SKID-STEER LOADER SPECIFICATIONS Dimensions are given for loader equipped with standard tires and 68 inch Construction and Industrial bucket and may vary with other bucket types.
SECTION 5 SPECIFICATIONS
SECTION 5 SPECIFICATIONS ENGINE Type S753 Diesel S773 Diesel Engine Gross Horsepower 15.7 kw (21hp) 17.9 kw (24 hp) Cylinders 3 3 Bore 75 mm (2.95") 75 mm 77 mm Stroke 72 mm 72 mm Displacement 0.954 L
Technical Specifications
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier Final HP (18 kw) 8,9 lb (8, kg) Reach
HIGH-CAPACITY IC CUSHION
HIGH-CAPACITY IC CUSHION 18000 22000 LBS. SPECIFICATIONS THDC1800-2200B-24 THDC1800-36 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY IC CUSHION CAPACITY 18000 22000 LBS.
HIGH-CAPACITY IC PNEUMATIC
HIGH-CAPACITY IC PNEUMATIC REACH NEW HEIGHTS 22000 51000 LBS. SPECIFICATIONS 50-4FD100-135 50-4FDK150-160 4FD150-230 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC
15,500 lb Capacity. Diesel Pneumatic Tire Forklift
15,500 lb Capacity Diesel Pneumatic Tire Forklift A Reputation For Reliability Achieving the perfect balance of innovation and value is a near obsession at Mitsubishi Forklift Trucks. Our company-wide
HIGH-CAPACITY LARGE IC CUSHION
HIGH-CAPACITY LARGE IC CUSHION 25000 100000 LBS. SPECIFICATIONS T HDC2500-3500-24 T HDC2500-5000-30 T HDC3000-5500-36 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY LARGE
CORE IC PNEUMATIC SPECIFICATIONS LBS. REACH NEW HEIGHTS CLASS 8FGU FDU15-32 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE
CORE IC PNEUMATIC 3000 6500 LBS. REACH NEW HEIGHTS SPECIFICATIONS 8FGU15-32 8FDU15-32 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com CORE IC PNEUMATIC CAPACITY 3000 6500 LBS. MAXIMUM
IC-40-2C. Tech Spec. Industrial Crane. Four-wheel drive for tough applications. View thousands of Crane Specifications on FreeCraneSpecs.
Tech Spec Industrial Crane Four-wheel drive for tough applications Rated Capacity Limiter... Standard Capacity on Outriggers... 9,000 lbs Pick and Carry Capacity... up to 7,200 lbs Height... 6 8 Width...
TXB-250M. The master parts depot ships genuine TAYLOR parts nationwide and is a key component in the Sudden Service, Inc. dealer network.
PRODUCT LINE WHEELBASE & CAPACITIES TXB-180S (18,000-lb. Cap. at 24" L.C., 110" WB) TXB-200S (20,000-lb. Cap. at 24" L.C., 110" WB) TXB-250M (25,000-lb. Cap. at 24" L.C., 121" WB) TXB-300L (30,000-lb.
H HD/S SERIES TECHNICAL GUIDE
H800-1050HD/S SERIES TECHNICAL GUIDE WWW.HYSTER.COM H800-1050HD/S DIMENSIONS 4-24 4-21 4-25b 4-25a 4-35 4-1 4-1 H800-1050HD/S MAST DIMENSIONS 4.4 Lift Height (Top of Fork) 4.2 Mast Lowered Height* 2 Stage
PRODUCT LINE WHEELBASE & CAPACITIES
PRODUCT LINE WHEELBASE & CAPACITIES TX-4030 (30,000-lb. Cap. at 36" L.C., 132" WB) Rigger Application: 40,000-lbs. Cap. at 36 L.C. if traveling less than 1 mph up to 48-in. lift. Truck is shown with available
PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS
PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS EXPECT PRODUCTIVITY. EXPERIENCE ENHANCED PERFORMANCE WITH A POWERFUL LOW-EMISSIONS ENGINE
DEPARTMENT OF THE ARMY TECHNICAL MANUAL TECHNICAL MANUAL OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL TRUCK, LIFT, FORK, POWER SHIFT G.E.D.
TM 10-3930-624-12 DEPARTMENT OF THE ARMY TECHNICAL MANUAL TECHNICAL MANUAL OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL TRUCK, LIFT, FORK, POWER SHIFT G.E.D., 6,000 LB CAPACITY, SRT. 180 IN. LIFT (ALLIS
Engine-Powered Forklift Trucks ton (Counter-Balanced Type)
Engine-Powered Forklift Trucks 1.5-3.5 ton (Counter-Balanced Type) ENHANCED OPERATOR COMFORT SUPERIOR MANEUVERABILITY AND ASSURED SAFETY Excellent operator visibility Wider forward visibility Clearer visibility
534E LA LANDFILL COMPACTOR. Operating Weight - w/ blade kg (50,485 lb) - w/ bucket kg (53,351 lb) Net Horsepower 169 kw (227 hp)
534E LA LANDFILL COMPACTOR Net Horsepower 169 kw (227 hp) Compaction ratio 1 : 3.5 Operating Weight - w/ blade 22 900 kg (50,485 lb) - w/ bucket 24 200 kg (53,351 lb) The best in the business for productivity
IC-20-J. Tech Spec. Industrial Crane. Features the exclusive rotating boom
Tech Spec IC-20-J Industrial Crane Features the exclusive rotating boom Capacity on Outriggers... 5,000 lbs (2,270 kg) Pick and Carry Capacity... up to 2,500 lbs (1,130 kg) Height... 5 6 (1.66 m) w/o Operator
Hyster E45-65Z Lift Truck Dimensions
Hyster E45-65Z Lift Truck Dimensions 16 4.0 (102) 36 19 16 EQUAL INTERSECTING RIGHT ANGLE AISLE WITH 42" (1 067) WIDE LOAD AND 32" (813) LONG LOAD. 65.2" (1 656) 65.9" (1 674) 67.1" (1 704) 69.1" (1 755)
S30-40FT SERIES TECHNICAL GUIDE
S30-40FT SERIES TECHNICAL GUIDE WWW.HYSTER.COM DIMENSIONS 21 17 37.0 (940) 22 24 For 90 Stacking Aisle, Add Outside Turning Radius Plus Dimension 22 Plus Load Length. 21 15 15 19 18 10 Head Clearance When
HIGH-CAPACITY ELECTRIC CUSHION
HIGH-CAPACITY ELECTRIC CUSHION 15000 40000 LBS. SPECIFICATIONS THDE1500-4000-24 THDE3000-4000-30 CLASS 1 ELECTRIC MOTOR RIDERS ToyotaForklift.com HIGH-CAPACITY ELECTRIC CUSHION CAPACITY 15000 40000 LBS.
DRIVETRAIN. NOTE: Travel speeds at full engine throttle. ELECTRICAL
321D Articulated Wheel Loader ENGINE Model... Perkins 1004-42 Type... 4-stroke, turbocharged Cylinders... 4 Bore/Stroke... 4.06 x 5.00 (105 X 127 mm) Displacement... 258 in 3 (4.23 L) Fuel injection...
HYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE consolidatedcrane.com Houston, TX 713.641.3330 Max. Lift Capacity: 500,000 lbs Max. Length: 300 ft Max. + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500-II CRAWLER CRANE
C-G. 8,000-12,000 lb. Capacity IC Pneumatic Tire. Specifications
C-G 8,000-12,000 lb. Capacity IC Pneumatic Tire C IC Pneumatic Tire 15 20 13 17 8 16 18 9 3 37 21 33 11 14 Characteristics Dimensions Performance Weight Chassis 1 Model CG35S-7 CG40S-7 CG45S-7 CG50C-7
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
Technical Guide. Heavy-Duty Forklift Truck
Technical Guide Heavy-Duty Forklift Truck H300-360HD 2 DIMENSIONS 4-21 Equal intersecting right angle aisle with 76" (1930 mm) wide x 72" (1829 mm) long load: H300HD 2 155 (3936) H330HD 2 155 (3936) H360HD
SB-60 PRELIMINARY PIPELAYER. Net Horsepower 238 kw (320 hp) Max Lifting Capacity kg (158,731 lb) Operating Weight kg (112,655 lb)
SB-60 PIPELAYER Net Horsepower 238 kw (320 hp) Max Lifting Capacity 72 000 kg (158,731 lb) Operating Weight 51100 kg (112,655 lb) PRELIMINARY SB-60 PIPELAYER High stability and low ground pressure Easy
IC-PNEUMATIC CMP20/25/30. M Series. Pneumatic Tire Lift Trucks Gasoline / LPG. 4,000 lbs 2000 kg 5,000 lbs 2500 kg 6,000 lbs 3000 kg
IC-PNEUMATIC CMP20 CMP25 CMP30 Pneumatic Tire Lift Trucks Gasoline / LPG 4,000 lbs 2000 kg 5,000 lbs 2500 kg 6,000 lbs 3000 kg CMP20/25/30 M Series CLARK THE FORKLIFT North America Korea w w w. c l a r
Rigger Truck. 36-in. Load Center Machine TX-4030* TX-4030 Capacities
Taylor machine works, inc. Rigger Truck 36-in. Load Center Machine TX-4030* TX-4030 Capacities TX-4030 (36,000-lb. Cap. at 36" L.C., 132" WB) Rigger Application: TX-4030 (40,000-lb. Cap. at 36" L.C., 132"
HIGH-CAPACITY ADJUSTABLE WHEELBASE
HIGH-CAPACITY ADJUSTABLE WHEELBASE 15000 80000 LBS. SPECIFICATIONS T HDA15/25 T HDA25/35 T HDA40/60 T HDA60/80 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY ADJUSTABLE
7,000-12,000 lb Capacity Electric Cushion Tire Lift Trucks
7,000-12,000 lb Capacity Electric Cushion Tire Lift Trucks Getting It Done MODEL STD / OPT BASE VOLTAGE CAPACITY (LBS.) E7000 ES / EE 7,000 36 / 48 E8000 ES / EE 8,000 36 / 48 E10000 ES / EE 10,000 36
Number of rollers Top, each track 1 Bottom, each track 5 Number of shoes Triple grouser each side 39. Gradeability 70%
CX75 EXCAVATOR TIER III CERTIFIED ENGINE Model Isuzu AU-4LE2X,Tier III certified Type 4-stroke turbocharged Cylinders 4 Bore/Stroke 3.35 in x 3.78 in (85 x 96 mm) Displacement 133 in 3 (2179 cc) Fuel injection
Doosan XHP1070WCAT Bid Specifications
MANUFACTURER MODEL Doosan Infracore XHP1070WCAT ENGINE TIER 1 Make/model CATERPILLAR 3406TA Number of cylinders 6 Displacement 893 cid 14.6 L Bore and stroke 5.4 x 6.5 13.7cm x 16.5cm Speed idle / full
C-G SERIES. Specifications. IC Pneumatic Tire 8,000-12,000 lbs
C-G SERIES IC Pneumatic Tire 8,000-12,000 lbs C C-G Series IC Pneumatic Tire 14 11 21 19 50" (1270 mm) 16 8 87.6-87.8" (2225-2230 mm) Std 15 18 19.8" (503 mm) - Class III* 24.3" (617 mm) - Class IV* *Carriage
PS360C. Pneumatic Tire Compactor
PS36C Pneumatic Tire Compactor Cat 354C Turbocharged Diesel Engine Gross Power 98 kw 13 hp Maximum Operating Weight 25 kg 55,115 lb Rolling Width 2.28 m 7' 6" Reliability and Versatility You Can Depend
DL250TC TECHNICAL DATA
DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
140H. Motor Grader. Global Version. Cat 3176 ETA Engine. Weights. Variable Horsepower Arrangement. Moldboard. Variable Horsepower Plus Arrangement
140H Motor Grader Global Version Cat 3176 ETA Engine Base Power (all gears) 123 kw Variable Horsepower Arrangement - gears 1-3 123 kw - gears 4-8 138 kw Variable Horsepower Plus Arrangement - gears 1-3
Technical Guide. Heavy-Duty Forklift Truck
Technical Guide Heavy-Duty Forklift Truck H190-280HD 2 DIMENSIONS 4-21 Equal intersecting right angle aisle with 48" (1219 mm) forks and 67" (1702 mm) wide x 72" (1829 mm) long load: H190HD 2 140 (3545)
36,000 lb. Forklift Chassis Flipper Sect. 4 - Equipment Specification Page 1 of 6
4.0 SCOPE OF WORK: A. Work includes, but is not limited to, providing all labor, materials, equipment, and services required for the design, manufacture, fabrication, assembly, sandblasting, painting,
CUSHION TIRE FORKLIFT 3,000-6,500 LB CAPACITY LP GAS MODELS COMFORT AND CONVENIENCE YOU CAN RELY ON
CUSHION TIRE FORKLIFT 3,000-6,500 LB CAPACITY LP GAS MODELS COMFORT AND CONVENIENCE YOU CAN RELY ON COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FGC15N-FGC33N CUSHION TIRE FORKLIFT
H40-60XT SERIES TECHNICAL GUIDE
H40-60XT SERIES TECHNICAL GUIDE WWW.HYSTER.COM DIMENSIONS 10 10 11 11 TRUCK MODEL C D E T W X in (mm) percent percent in (mm) in (mm) in (mm) H40XT 17.1 (434) 70 53 6.6 (168) 13.7 (349) 27.6 (702) H50XT
8 feet 4 inches (2.54m) 11 feet 2 inches (3.4m) 9 feet 5 inches (2.87m) 15 inches (38cm) 23 MPH (37 km/h)
Page 1 of 9 RT-300-G ENGINEERING SPEC Replaces Form GD111F Dated June 2011 BMC s RT-300 Rough Terrain Crane is a self-propelled crane designed for lifting and material handling applications, with the special
534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)
534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice
Bid Specifications HP935WCU PORTABLE AIR COMPRESSOR
Bid Specifications HP935WCU PORTABLE AIR COMPRESSOR GENERAL: TANDEM AXLE; STANDARD Working weight 10400 lbs 4717 kg Length 203.5 5.169 m Width 79.6 2.022 m Height 93 2.362 m Track 65.2 1.656 m Tire Size
H HDS SERIES TECHNICAL GUIDE
H400-450HDS SERIES TECHNICAL GUIDE WWW.HYSTER.COM H400-450HDS DIMENSIONS 4-21 4-35 4-1 4-1 4-5 4-4 4-2 4-7 4-31 4-32 1-8 1-9 4-19 4-20 Circled dimensions correspond to the line numbers on the tabulated
CORE IC CUSHION REACH NEW HEIGHTS
CORE IC CUSHION REACH NEW HEIGHTS 3000 6500 LBS. SPECIFICATIONS 8FGCU15-32 8FGCSU20 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com CORE IC CUSHION CAPACITY 3000 6500 LBS. WHEELBASE
SB-85 PIPELAYER. Net Horsepower 238 kw (320 hp) Max Lifting Capacity kg (220,460 lb) Operating Weight kg (134,700 lb)
SB-85 PIPELAYER Net Horsepower 238 kw (320 hp) Max Lifting Capacity 100 000 kg (220,460 lb) Operating Weight 61 100 kg (134,700 lb) SB-85 PIPELAYER High stability and low ground pressure Easy operation
Help take operator support to a new level with Mitsubishi forklift trucks.
A Reputation For Reliability Achieving the perfect balance of innovation and value is a near obsession at Mitsubishi Forklift Trucks. Our company-wide commitment is to build forklifts that deliver reliability,
Technical Specifications SENNEBOGEN Rubber Tired Material Handler
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB.-C Tier Final HP ( kw) Reach standard optional '" (. m) (stick pin) '" (
SPECIFICATIONS. General Specifications. Dimensions
General s Engine RPM Setting Spark Plug TX 420 22306 Ser #200000100-200000999 / CH20S-64637 Ser #210000100-240000999 / CH20S-64656 Ser #250000100-270000999 / CH20S-64725 Ser #280000100-280000999 / CH20S-64762
PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS
PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS EXPECT PRODUCTIVITY. EXPERIENCE ENHANCED PERFORMANCE WITH A POWERFUL LOW-EMISSIONS ENGINE.
IC-80-1J: 3-section hydraulically extended boom with capacity of 18,000 pounds (8,160 kg) at a 5-foot load (1.5 m) load radius.
IC-80-J ENGINEERING SPEC Page 1 of 14 Replaces Form CD111J Dated November 2011 The IC-80-J is a self-propelled Industrial Crane designed for in-plant lifting and material handling applications, with special
C-D. 8,000-12,000 lb. Capacity IC Pneumatic Tire. Specifications
C-D 8,000-12,000 lb. Capacity IC Pneumatic Tire C IC Pneumatic Tire 15 20 13 17 8 16 18 9 3 37 21 33 11 14 Chassis Weight Performance Dimensions Characteristics 1 Model CD35S-7 CD40S-7 CD45S-7 CD50C-7
Technical Guide. Heavy Duty Forklift Truck
Technical Guide Heavy Duty Forklift Truck H360-36/48HD DIMENSIONS 4-21 4-35 4-1 4-1 4-5 4-4 4-7 4-2 1-6 1-5 4-32 4-31 1-8 4-19 4-20 1-9 2 H360-36/48HD SPECIFICATIONS PERFORMANCE MISC. DIMENSIONS WHEELS
Platinum II Series. 3,000 7,000 lb. Capacities. Pneumatic Tire / Engine Powered Models / LPG, Gasoline, Dual Fuel, Diesel
Platinum II Series Pneumatic Tire / Engine Powered Models / LPG, Gasoline, Dual Fuel, Diesel 3,000 7,000 lb. Capacities Platinum II pneumatic series Dimensions PF30 PF35 PFS40 42.5" MFH OHL FL 22 32 Mast
ELECTRIC RIDERS. TMX13/15/15s/ 18/20x. Tri-Wheel Multi-Tire Lift Trucks Electric 48 Volt. TMX13 TMX15 TMX15s TMX18 TMX20x
ELECTRIC RIDERS TMX13 TMX15 TMX15s TMX18 TMX20x Tri-Wheel Multi-Tire Lift Trucks Electric 48 Volt TMX13/15/15s/ 18/20x 1250 1500 1500 1815 2000 CLARK THE FORKLIFT Europe orth Amerika South Korea w w w.
Unprecedented precision and ease of operation.
RM123 MOTORGRADER Unprecedented precision and ease of operation. The frame, drawbar forged steel circle are designed for durability in heavy duty applications. The strong frame drawbar uses a durable material.
FORKLIFTS. Final Drives Type...heavy-duty, inboard planetary final drives evenly distribute shock loads over three gears
485E 486E 488E FORKLIFTS SPECIFICATIONS CONSTRUCTION EQUIPMENT DIVISION JD Engine 485E / 486E / 488E Type...John Deere 4045D Naturally Aspirated Rated power @ 2,200 rpm...73 SAE net hp (54.4 kw) / 78 SAE
TF45/60 (metric) by LIFT SYSTEMS, INC. Global Leaders in Specialized. Lifting Equipment! Courtesy of Crane.Market
(metric) by LIFT SYSTEMS, INC. Global Leaders in Specialized Lifting Equipment! GENERAL SPECIFICATIONS STANDARD EQUIPMENT ENGINE: FORKS: GM 3.0L, 4 cylinder, 56 Kw (75 hp) propane engine PUMP: 2,438mm
301.5, 301.6, Mini Hydraulic Excavator
301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563
IC-40-2C. Engineering Spec. Page 1 of 8 Date: July Form JD112C. Manufacturing Corp. Replaces: Dated:
Engineering Spec Manufacturing Corp. (913) 888-0606 FAX (913) 888-8431 www.broderson.net IC-40-2C Page 1 of 8 Replaces: Dated: BMC s IC-40-2C is a self-propelled, industrial crane designed for in-plant
IC-100-A: 3-section hydraulically extended boom with capacity of 20,000 pounds (9,000 kg) at a 5-foot load (1.5 m) radius.
IC-100-A ENGINEERING SPEC Page 1 of 10 The IC-100-A is a self-propelled 10 US ton rated Industrial Carry Deck Crane designed for in-plant lifting and material handling applications. It is designed to incorporate
8,000-12,000 lb Capacity Pneumatic Tire Forklift Trucks
8,000-12,000 lb Capacity Pneumatic Tire Forklift Trucks Built Tough: The FG40N performs well in outdoor environments where surface conditions are often rough, wet and dusty and loads include unprocessed
ZX210F-3. Road Builder. 122 kw (164 hp) Live Heel Fixed Heel Butt & Top ZX210F
ZAXIS DASH-3 Foresters Road Builder Processor Live Heel Fixed Heel Butt & Top Power Clam Models 122 kw (164 hp) ZX210F ZAXIS DASH-3 Foresters EXTREME Productivity. tough machines for tough jobs. Hitachi
1021F/XR. Transmission: 4F/ 3R Proportional w/ Electronic Control Module torque sensing autoshift /manual shift and modulation
1021F/XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Case / FPT Model F2CFE614C Tier 4 interim certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore / Stroke 4.61 in x 5.31 in (177
Engine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged,
SK/SK TC Engine SK SK TC Manufacturer and Model John Deere PowerTech TM E HT7 turbocharged, standard John Deere PowerTech E HT6 turbocharged, standard Non-Road Emissions Standard EPA Interim Tier /EU Stage
Lubricant and Coolant Capacity
Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt
Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)
9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...
PNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT
PNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FG40N-FG55N
POWERTRAIN. NOTE: Travel speeds at 2334 engine rpm with 19.5L x 24 rear tires. Speeds decrease with 17.5L x 24 rear tires.
580L Series 2 Loader/Backhoe ENGINE Model... Case 4-390 diesel Type... 4-stroke, naturally aspirated Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection...
Section 00 Chapter 3 GENERAL SPECIFICATIONS AND SPECIAL TORQUES NH
Section 00 Chapter 3 GENERAL SPECIFICATIONS AND SPECIAL TORQUES 6-13870NH TABLE OF CONTENTS GENERAL SPECIFICATIONS... 0-3 Fluid Capacities and Types... 0-3 Hydraulic Specifications... 0-3 Electrical Specifications...
VX Series. Diesel Forklift Trucks. 17,000 / 17,500 / 19,000 lbs.
VX Series Diesel Forklift Trucks 17,000 / 17,500 / 19,000 lbs. Low cost of operation is derived from increased uptime, low maintenance and high productivity Designed for dependability in the most rigorous
LARGE IC CUSHION REACH NEW HEIGHTS
LARGE IC CUSHION REACH NEW HEIGHTS 8000 15500 LBS. SPECIFICATIONS 8FGC35U-70U CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com LARGE IC CUSHION CAPACITY 8000 15500 LBS. WHEELBASE 61.8
CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
3,000-7,000 lb Capacity Gas, LP Gas, and Diesel Pneumatic Tire Lift Trucks
3,000-7,000 lb Capacity Gas, LP Gas, and Diesel Pneumatic Tire Lift Trucks Boost Productivity Comfort and convenience rise to a higher level in these Cat lift trucks. In the spacious operator s compartment,
Hyster H40-70FT Lift Truck Dimensions
Hyster H40-70FT Lift Truck Dimensions 21 Dual Tread 63.0 (1597) Standard Tread 45.6 (1157) 44.9 (1140) Wide Tread 52.6 (1336) 2 18 Equal Intersecting Right Angle Aisle with 42.0 (1067) Wide Load and 48.0
RT-300-B. Tech Spec. Preliminary Information. * 30,000 pounds capacity at 10 ft. radius. * 4-wheel drive. * 4-wheel steer
Tech Spec RT-300-B * 30,000 pounds capacity at 10 ft. radius * 4-wheel drive * 4-wheel steer * 360 degree continuous rotation * 60 ft. of full power main boom reach RT-300-2B CAPACITIES APPLY TO OPERATION
Mantis Rerailer. General Specifications
General Specifications 1. Typical Operating Parameters 2. General 1.1 Operating temperatures will typically be between -4 F (-20 C) to 122 F (50 C). 1.2 Relative humidity ranges between 20% and 100%. 1.3
ESC-AD. Three-Wheel Stand. 3,000 / 3,500 / 4,000 lbs.
ESC-AD Three-Wheel Stand 3,000 / 3,500 / 4,000 lbs. Multifunction control handle provides simultaneous control of travel and hydraulic functions Yale Smart Operator Sensing System includes no pedals providing