PRODUCT CATALOG SURFACE PUMPS RESIDENTIAL & LIGHT COMMERCIAL. franklinwater.com

Transcription

1 PRODUCT CATALOG SURFACE PUMPS RESIDENTIAL & LIGHT COMMERCIAL franklinwater.com

2

3 RESIDENTIAL & LIGHT COMMERCIAL SURFACE PUMPS Jet Pumps... 2 Shallow Well VersaJet...3 SWJ (Cyclone) Series...5 Convertible VersaJet...6 Convertible Pro (RM2) Series... 1 Convertible C Series Air Charger Kit Injectors & Pressure Switches Pressure Tanks Self-Priming Pumps...18 Turf Boss FBSE Series...22 Booster Pumps MH Series...25 BT4 Series...3 BT4 Series 56C Pump Ends...36 Transfer Pumps...37 DDS Series...38 FCE Series... 4 S Series...42 A Series JCM Series For the most up-to-date product information, visit franklinwater.com.

4 JET PUMPS Franklin s jet pumps can be configured for a variety of pressures and flow choices, and are Ideal for supplying fresh water to homes, cabins, farms, or practically anywhere that has a suction lift of 1 feet or less. In addition, the material options range from cast iron to stainless steel, making the pumps a contractor s choice for any job. PRODUCT FAMILY Shallow Well VersaJet & VersaJet Pro SWJ Series Convertible VersaJet & VersaJet Pro Convertible Pro (RM2) Series C Series Jet Pump Accessories APPLICATIONS Fresh Water Supply (depths up to 1') FAMILY COMPARISON CHART Model Performance SW VersaJet Shut-off PSI 86 Max. Lift 25 VersaJet Pro Shut-off PSI 73 Max. Lift 25 SWJ (Cyclone) Series Shut-off PSI 68 Max. Lift 25 Conv. VersaJet Shut-off PSI 118 Max. Lift 9 Conv. VersaJet Pro Shut-off PSI 111 Max. Lift 9 Pro (RM2) Series Shut-off PSI 9 Max. Lift 1 C Series Shut-off PSI 9 Max. Lift 1 2

5 JET PUMPS - SHALLOW WELL VERSAJET FEATURES Revolutionary Quick-Change jet nozzle replacement system allows for easy customization of the pump; performance can be quickly changed from a high-pressure to high-flow setup without removing the plumbing or opening the case Impeller (with stainless steel insert), diffuser, jet nozzle, and venturi all molded with Modified PPO, a material that increases efficiency and hydraulic performance Heavy-duty cast iron case ensures optimum durability and long life Floating stainless steel eye seal for maximum performance and efficiency Powered by high quality, industry proven, UL778 approved, indoor/outdoor square-flange motors; three-phase inverter duty rated Pressure switch installed and set at 3/5 psi Built-in drain plug for easy winterizing and servicing Handles water temperatures up to 1 F/49 C and shut-off pressures up to 9 psi ORDERING INFORMATION Model HP Phase Dis. x Suc. (FNPT) Voltage Pump Unit Order No. Wt. (lbs) FVJ5CI 1/ FVJ7CI 3/ /23 FVJ1CI FVJ15CI 1-1/2 1" x 1-1/4" FVJ5CI-P 1/ FVJ7CI-P 3/4 3 8/23/ FVJ1CI-P DIMENSIONS Model HP A FVJ5CI 1/ " FVJ7CI 3/4 18." FVJ1CI " FVJ15CI 1-1/ " FVJ5CI-P 1/2 18." FVJ7CI-P 3/ " FVJ1CI-P " NOTE: Dimensions will vary according to motor manufacturer 1/2 AND 3/4 HP VERSAJET A 5.84" 1" NPT DISCHARGE 1-1/4" NPT SUCTION 1 AND 1.5 HP VERSAJET A 9.1" 8.15" 12.88" 9.9" 5.97" 7.97".47" TYP.56".41" TYP 2." 3.34" 1" NPT DISCHARGE 1-1/4" NPT SUCTION.56".41" TYP 2." 1.41" 8.26" 9.18" 3.44" 6.5" 4.44" 6.5".47" TYP 4.44" 8.7" 5.46" 1.68" 4.87" 3

6 JET PUMPS - SHALLOW WELL VERSAJET PERFORMANCE FVJ5CI 1" Dis. x 1-1/4" Suc. Discharge Pressure (PSI) Model Nozzle Total Suction Lift (ft) Gallons Per Minute (GPM) Nozzle B (Standard) FVJ7CI FVJ1CI FVJ15CI Nozzle C (High Pressure) Nozzle A (High Flow) Nozzle C (Standard) Nozzle D (High Pressure) Nozzle A (High Flow) Nozzle B (Standard) Nozzle C (High Pressure) Nozzle A (High Flow) Nozzle B (Standard) Nozzle C (High Pressure) Nozzle A (High Flow) Shut-off Pressure (PSI)

7 JET PUMPS - SWJ (CYCLONE) SERIES FEATURES Non-corrosive thermoplastic construction Replaceable inline nozzle design for maximum hydraulic efficiency and ease of service Self-cleaning, anti-clogging injector screen Thermoplastic impeller and diffuser ensure increased hydraulic performance Floating stainless steel eye seal for maximum performance and efficiency Square-flange mounting provides easy serviceability without disturbing the plumbing Built-in drain plug for easy winterizing and servicing Mechanical shaft seal allows positive protection against leaking Pressure switch is installed and set at 3/5 psi Handles water temperatures up to 1 F/49 C and working pressure up to 75 psi ORDERING INFORMATION Model HP Dis. x Suc. (FNPT) Voltage Pump Unit Order No. Wt. (lbs) FSWJ5P 1/ FSWJ7P 3/4 1" x 1-1/4" 115/ FSWJ1P DIMENSIONS Model HP A FSWJ5P 1/ " FSWJ7P 3/ " FSWJ1P " NOTE: Dimensions will vary according to motor manufacturer PERFORMANCE Model HP FSWJ5P 1/2 FSWJ7P 3/4 FSWJ1P 1 Total Suction Lift (ft) Discharge Pressure (PSI) Gallons Per Minute (GPM) Shut-off Pressure (PSI) " 4.13" 4.13" 8.13" A 6.25" 4.38" 5

8 JET PUMPS - CONVERTIBLE VERSAJET FEATURES Heavy-duty cast iron case ensures optimum durability and long life Modular suction flange system to retrofit current installations without disturbing the existing plumbing Thermoplastic impeller and diffuser precision molded for high efficiency and dependability Phenolic/Ceramic mechanical shaft seal ensures leakproof fit and maximum pressure handling capability Adjustable pressure switch is factory set at 3/5 psi Powered by high quality, industry proven, UL778 approved, indoor/outdoor squareflange motors Built-in drain plug for easy winterization and servicing ORDERING INFORMATION Shallow-Well Kits Deep-Well Kits Model HP Dis. x Suc. (FNPT) Voltage Order No. Incl. Injector Wt. (lbs) Order No. Incl. Injector Wt. (lbs) FCVJ5CI 1/ SW SW DW DW5 49 FCVJ7CI 3/ SW SW DW DW1 52 1" x 1-1/4" 115/23 FCVJ1CI SW SW DW DW4 55 FCVJ15CI 1-1/ SW SW DW DW2 59 NOTE: Deep-well installations require a 4" inside well diameter and control valve DIMENSIONS Model HP A B FCVJ5CI 1/2 9.63" 13.31" FCVJ7CI 3/4 1.38" 14.6" FCVJ1CI 1 11." 13.68" FCVJ15CI 1-1/ " 15.56" B A 3.68" 1.33" 2.19" 5.75" 1.69" 3.7" 1"-11.5 NPT DISCHARGE 3.7" 2.32" MIN 3.93" MAX 4." MIN 5.81" MAX 7.1" MIN 8.71" MAX 8.7" MIN 1.31" MAX 1.25"-11.5" NPT NOTE: Dimensional illustration shown with K1-S flange installed 1"-11.5" NPT 6

9 JET PUMPS - CONVERTIBLE VERSAJET SHALLOW-WELL PERFORMANCE CVJ Series Model HP Injector Kit Total Suction Lift (ft) FCVJ5CI 1/2 FCVJ7CI 3/4 FCVJ1CI 1 FCVJ15CI 1-1/2 SW1 SW2 SW3 SW5 SW6 SW7 SW4 SW5 SW6 SW4 SW5 SW6 NOTES: Pressure switch preset to 3-5 psi; maximum pump working pressure is 15 psi Discharge Pressure (PSI) Gallons Per Minute (GPM) Shut-off Pressure (PSI)

10 JET PUMPS - CONVERTIBLE VERSAJET DEEP-WELL PERFORMANCE CVJ Series Model HP Injector Kit Total Suction Lift (ft) FCVJ5CI 1/2 FCVJ7CI 3/4 FCVJ1CI 1 FCVJ15CI 1-1/2 DW2 DW5 DW2 DW1 DW2 DW4 DW3 DW2 DW4 NOTES: Pressure switch preset to 3-5 psi; maximum pump working pressure is 15 psi Discharge Pressure (PSI) Gallons Per Minute (GPM) Shut-off Pressure (PSI)

11 JET PUMPS - CONVERTIBLE VERSAJET CUSTOM ORDERING INFORMATION STEP 1: Select a pump and motor size (a small amount of distributor or contractor assembly required). Pump (w/o Flange Kit) Model HP Dis. x Suc. (FNPT) Voltage Order No. Wt. (lbs) FCVJ5CI 1/ FCVJ7CI 3/ " x 1-1/4" 115/23 FCVJ1CI FCVJ15CI 1-1/ STEP 2: (skip for new installations): Select the suction flange kit (modular face plate) needed for replacement (if the injector assembly remains on the pipe and only the pump and motor are being replaced). K1-S K2-G K3-F K4-M NOTE: Contact Franklin Electric customer relations for competitive replacement identification. STEP 3: (optional for replacement installations): Select the injector kit based on performance requirements (K1-S face plate flange and hardware included with all injector kits). A control valve is required for deep-well installations. Shallow-Well Injector Kits Model Order No. Wt. (lbs) SW SW SW SW SW SW SW Deep-Well Injector Kits* Model Order No. Wt. (lbs) DW DW DW DW DW * Deep-well installations require a 4" inside well diameter and control valve

12 JET PUMPS - CONVERTIBLE PRO (RM2) SERIES FEATURES Heavy-duty cast iron case and stainless steel impeller ensure optimum durability Thermoplastic diffuser is molded for efficiency and dependability Screw-in injector for easy conversion from shallow- to deep-well installation Shaft coupling designed for easy removal of motor Mechanical shaft seal ensures leakproof fit and continuous water lubrication High service factor 56C-frame motor for maximum performance Hardware kit allows for versatility of installation and includes pressure gauge, plugs, shallow-well injector, and bypass plug Adjustable pressure switch installed and set at 3/5 psi Maximum temperature of 14 F/6 C ORDERING INFORMATION Model HP Phase Dis. x Suc. (FNPT) Voltage Order No. Pump Unit Shallow-Well Injector Deep-Well Injector Wt. (lbs) Total Suction Lift (ft) Order No. Wt. (lbs) Total Suction Lift (ft)* Order No.** E E E123 FP5CI-C 1/ R 1 FP7CI-C 3/ R 1" x 1-1/4" 115/ R E1118 FP1CI-C R E R E11 NOTES: Order deep-well injector separately; minimum inside well diameter requirement of 4" for deep-well injectors; parallel pipe injectors are required for deep well installtions * 3-phase for model numbers FP7CI-C and FP1CI-C apply for both 3-6 ft and 5-1 ft total suction lift for the deep well injector ** 3-phase for model numbers FP7CI-C and FP1CI-C apply for both 3-6 ft and 5-1 ft order numbers for the deep well injector Wt. (lbs) DIMENSIONS Model HP A FP5CI-C 1/ " FP7CI-C 3/ " FP1CI-C " NOTE: Dimensions will vary according to motor manufacturer 3.88" 6." 4.25" 5.25" 8.13" 6.47" 7.97 A 1

13 JET PUMPS - CONVERTIBLE PRO (RM2) SERIES SHALLOW-WELL PERFORMANCE Model HP 1" Dis. x 1-1/4" Suc. Discharge Pressure (PSI) Injector Order No. FP5CI-C 1/ R FP7CI-C 3/ R FP1CI-C R FP1CI-C (High Head) R Total Suction Lift (ft) Gallons Per Minute (GPM) Shut-off Pressure (PSI) NOTES: Pressure switch pre-set 3-5 psi; the appropriate injector is included with the units; maximum pump working pressure is 15 psi; all the above discharge pressures were measured using 1.25" PVC suction pipe and 1.25" foot valve DEEP-WELL PERFORMANCE 1" Dis. x 1-1/4" Suc. 1" Drive Pipe Discharge Pressure (PSI) Shut-off Model HP Injector Total Suction Pressure Order No. Lift (ft) Gallons Per Minute (GPM) (PSI) E FP5CI-C 1/ E E FP7CI-C 3/ E E FP1CI-C E NOTES: Pressure switch pre-set 3-5 psi; maximum pump working pressure 15 psi; all above discharge pressures were measured using 1.25" PVC suction pipe and 1.25" foot valve and 1 drive pipe Inj. Min. Operating Pressure

14 JET PUMPS - CONVERTIBLE C SERIES FEATURES Heavy-duty cast iron construction for long life Stainless steel impeller for high performance Thermoplastic diffuser is molded for efficiency and dependability Screw-in injector for easy conversion from shallow- to deep-well installation Stainless steel shaft on motor for direct mounting of impeller Mechanical shaft seal ensures leakproof fit and continuous lubrication Factory assembled as a shallow-well unit Hardware kit allows for versatility of installation and includes pressure gauge, pipe plug, shallow-well injector, and bypass plug Deep-well injector must be ordered separately Standard 3-5 psi adjustable pressure switch ORDERING INFORMATION Model No. HP Suc. x Dis. (FNPT) Voltage Pump Unit Deep-Well Injector Order No. Wt. (lbs) Total Suction Lift (ft) Order No. Wt. (lbs) E118 FE5CI-C 1/ E /4" x 1" 115/ E E FE7CI-C 3/ E E914 NOTE: Order deep-well injector separately; minimum inside well diameter requirement of 4" for deep-well injectors; 12

15 JET PUMPS - CONVERTIBLE C SERIES SHALLOW-WELL PERFORMANCE C Series Model No. HP Injector Order No. Total Suction Lift (ft) Discharge Pressure (PSI) Gallons Per Minute (GPM) Shut-off Pressure (PSI) FE5CI-C 1/ R FE7CI-C 3/ R NOTE: The appropriate shallow-well injector is included; pressure switch preset to 3-5 psi;. maximum pump working pressure is 15 psi DEEP-WELL PERFORMANCE Model No. HP FE5CI-C 1/2 FE7CI-C 3/4 C Series Injector Order No. 147E E E E E E914 Total Suction Lift (ft) Discharge Pressure (PSI) Gallons Per Minute (GPM) Shut-off Pressure (PSI)

16 JET PUMP ACCESSORIES - AIR CHARGER KIT FEATURES Specifically designed to prevent water-logging typically associated with a conventional galvanized pressure tank Automatically maintains a proper balance of air and water volume in the tank Eliminates short cycling, thus extending motor life and reducing power consumption Eliminates tank draining normally required with water-logged tanks Unit consists of air charger, reducer bushing, adapter nut, 1/4" polyethylene tubing, and male connector CHARACTERISTICS Order No. Wt. (lbs)

17 JET PUMP ACCESSORIES - INJECTORS & PRESSURE SWITCHES SCREW-IN, SHALLOW-WELL INJECTORS Model Injector Code Order No. Wt. (lbs) FP5CI-C, FP1CI-C R FP7CI-C R.5 FP1CI-C R EXTERNAL CONTROL VALVE Description Order No. Wt. (lbs) External Control Valve DEEP-WELL, 2-PIPE INJECTORS (4" WELLS) Model Total Suction Lift (ft) Order No. Wt. (lbs) FP5CI-C E915 FP7CI-C E123 FP7CI-C E1118 FP5CI-C E11 7 FP1CI-C E11 FP1CI-C E1125 Injector kit includes: Cast iron body, thermoplastic nozzle and venturi, and bronze foot valve INJECTOR KITS Model Order No. Description 1/2 Injector Kit Injector Kit for JPC-5-C 3/4 Injector Kit Injector Kit for JPC-75-C/JPC-1-C PRESSURE GAUGES Order No. Pressure Reading (PSI) PRESSURE SWITCHES Model PSI Setting Order No. Wt. (lbs) /4 PRSW4 Global Series 3/5 PRSW35 4/6 PRSW46 /4 69ES1AZ4 1 Furnas Pro Series 3/5 69ES1AZ35 4/6 69ES1AZ46 Pressure Gauge (-1 psi; 1/4" b.m.)

18 JET PUMP ACCESSORIES - PRESSURE TANKS FEATURES NSI/NSF Standard 61 approved assures safe, clean drinking water Blended butyl rubber diaphragm system isolates the air charge from the water chamber; reinforced in specific wear areas for longer life Heavy-duty, cold-rolled steel construction Leak-resistant, O-ring sealed air valve cap allows adjustment of air pre-charge Inline Unique, patented dual water/air seal design offers superior leak protection Durable two-part paint finish is suitable for outdoor use and provides hundreds of hours of UV and salt spray protection in moderate climates* PERFORMANCE Horizontal Vertical Model Item No. UPC Gallons 3/5 psi (gal) Fixtures Type System Connect RL Inline 3/4" MNPT RL Inline 3/4" MNPT RL Inline 3/4" MNPT RL6H Horizontal 3/4" MNPT RL14H Horizontal 3/4" MNPT RL16* Vertical 1" NPT RLH* Horizontal 1" NPT RL21* Vertical 1" NPT RL34* Vertical 1" NPT RL4* Vertical 1" NPT RL Vertical 1-1/4" NPT RL Vertical 1-1/4" NPT SIZING Model Length Width Height Weight (lbs) Carton Cubes (cu ft) Pallet Quantity Quantity per Layer RL2 8.33" 8.33" 12.75" RL " 11.12" 15" RL8 13.5" 19.5" 13.5" RL6H 1.5" 18" 12.25" RL14H 15.75" 21.25" 17.25" RL " 15.75" 25.13" RLH 15.75" 29" 17.25" RL " 15.5" 32.75" RL " 17.5" 43.25" RL4 21.5" 21.25" 37.25" RL " 21.5" 6" RL " 26.75" 61.5" Layers per Pallet 3 PSI 4 PSI 5 PSI 16

19 JET PUMP ACCESSORIES - PRESSURE TANKS TANK REPLACEMENT GUIDE Flexcon Amtrol Other Franklin Challenger Well-Rite H2 Pro Well-X-Trol Wel-Flow Champion How 2 Tank Century State Perma Tank WellMate Pro-Source RL2 PRJ6 PJR6 PJR6 WX-11 WF-6 CM11 HT V6P PIL-2 WM8L N/A 5 RL6H PJRS PJRS PJRS WX15 N/A N/A N/A N/A N/A WM25L PS RL PC66 WR6 WWT- WX-2 WF6 CM42 HT V6 PAD- WM6 PS42T-T2 42 RL33 PC122 WR1 WWT-35 WX-3 WF11 CM83 HT32 V1 WM9 WM9 PS82T-T5 82 RL44 PC144 WR14 WWT-45 WX-25 WF14 CM15 HT44 V14 WM14 WM14 PS1-T5 82 RL62 PC211 WR WWT-65 WX-251 WF CM151 HT44 V PAD-52 WM PS-T51 2 RL85 PC266 WR26 WWT-85 WX-32 WF26 CM172 HT86 V25 PAD-86 WM25L PS2-T52 2 RL119 PC366 WR36 WWT-1 WX-35 WF36 CM25 HT119 V35 PAD-119 WM35 N/A 315 NOTE: Add S for horizontal models with pump stand DRAW-DOWN FACTORS Max. System Pressure (Cut-Out) PSIG BAR (1.38) 25 (1.72) 3 (2.6) 35 (2.41) 4 (2.76) 45 (3.1) 5 (3.45) Min. System Pressure (Cut-In) - PSIG (bar) 55 (3.8) NOTE: To convert values to kpa, multiply BAR by 1 6 (4.16) 65 (4.48) 7 (4.83) 75 (5.17) 8 (5.51) 85 (5.86) 9 (6.) 95 (6.55) 1 (6.89) 15 (7.24) Std. Galv. (gal) 11 (7.58) 17

20 SELF-PRIMING PUMPS Irrigation and sprinkler pumps are designed for supplying large volumes of water from a lake or pond supply to an irrigation system. They can also be in highvolume applications transferring water between locations. Franklin s quality selection features shut-off pressures up to 13 feet and flow rates exceeding 9 gallons per minute that will please any contractor s job. PRODUCT FAMILY Turf Boss FBSE Series APPLICATIONS Agricultural Irrigation Lawn Sprinkling Industrial Dewatering HVAC Systems (Heat Pump and Air Conditioning) Water Transfer and Supply Freshwater Pumping Commercial/Industrial Liquid Transfer Dewatering Flood Irrigation Livestock Watering Septic Tank Installations (in areas with drainage problems) FAMILY COMPARISON CHART Model Performance Turf Boss Shut-off PSI 56 Max. Lift 25 FBSE Series Shut-off PSI 3 Max. Lift 25 18

21 SELF-PRIMING IRRIGATION PUMPS - TURF BOSS FEATURES Self-priming design with the ability to lift water from a depth of 25' Easily serviced through a back pull-out design, which leaves all the plumbing and both the pump s base and case undisturbed in their original location Rugged cast iron case ensures optimum durability, quiet operation, and long life Modified PPO hydraulic components and floating stainless steel impeller eye-seal ensures dependable and efficient operation 34 stainless steel impeller available for maximum durability 1- and 3-phase motors available with dual voltage on smaller horsepower models; three-phase inverter duty rated Mechanical shaft seal allows positive protection against leaking Integral 1" NPT priming plug and built-in drain plug for easy winterizing and servicing Shut-off pressures to 13 feet, flow rates to 7 gpm, and water temperatures to 1 F ORDERING INFORMATION Complete Pump Pump End Only Model HP Phase Suc. x Dis. (FNPT) Voltage Order No. Wt. (lbs) Model Order No. Wt. (lbs) FTB1CI 1 115/ FTB1CI-PE FTB15CI 1-1/ / FTB15CI-PE FTB2CI FTB2CI-PE FTB1CI-SSI* 1 115/ FTB1CI-SSI-PE* FTB15CI-SSI* 1-1/ /2" x 1-1/2" 115/ FTB15CI-SSI-PE* FTB2CI-SSI* FTB2CI-SSI-PE* FTB1CI-SSI-T* / FTB15CI-SSI-T* 1-1/ / FTB2CI-SSI-T* / FTB3CI FTB3CI-PE " x 2" FTB3CI FTB5CI FTB5CI-PE /2" x 2" FTB5CI * Stainless steel impeller DIMENSIONS Model HP A (1-Phase) A (3-Phase) FTB1CI 1." 23.4" FTB15CI 1-1/2 21.6" 25." FTB2CI " 25." FTB3CI " 23.75" FTB5CI " 23.38" A 7.9" 3.85" 1.5" FNPT SUCTION 1.5" FNPT DISCHARGE.5".4" 7.27" 8.87" 7.15" 4.5" 3.94" 3.5" 2.93" 19

22 SELF-PRIMING IRRIGATION PUMPS - TURF BOSS PERFORMANCE: 1-2 HP INCREMENTAL PRESSURE INCREASE METERS PSI FEET HP /2 HP HP GPM L/MIN M 3 /H FLOW Model HP FTB1CI 1 FTB15CI 1-1/2 FTB2CI 2 Total Suction Lift (ft) Discharge Pressure (PSI) Gallons Per Minute (GPM) Shut-off Pressure (PSI)

23 SELF-PRIMING IRRIGATION PUMPS - TURF BOSS PERFORMANCE: 3-5 HP NOMINAL SPEED: 36 RPM 18 5 HP HP 1 HEAD (FEET) FLOW (GPM) 21

24 K C SELF-PRIMING EFFLUENT PUMPS - FBSE SERIES Cast iron volute with tapped openings for priming, venting, and draining Semi-open cast iron impeller that is blind-hold tapped so liquid will not corrode the shaft; Ideal for handling fertilizer, salt water, dirty water, and other liquids Mechanical seal with carbon/ceramic faces, FKM elastomers, and 3-series stainless steel components Reliable, industry-standard 1/2-3 hp motor; higher than NEMA service factor Capacities to 5 gpm; Heads to 92 feet 75 psi maximum working pressure; 1 F maximum temperature Clockwise rotation when viewed from motor end Complete Pump Pump End Kit Model HP PH Volts Dis. x Suc. (NPT) Order No. Wt. (lbs) Model Order No. Wt. (lbs) FBSE-5-S 1/ /23 1-1/4" x 1-1/4" FBSE-5-K FBSE-75-S 3/ /23 1-1/4" x 1-1/4" FBSE-75-K FBSE-1-S /23 1-1/4" x 1-1/4" FBSE-1-K FBSE-15-S 1-1/ /23 2" x 2" FBSE-15-K FBSE--S " x 2" FBSE--K FBSE-3-S " x 2" FBSE-3-K FBSE-3-T /46 2" x 2" FBSE-3-K NOTE: Pump End Kits (less motor) use 56J C face motors Model HP Fig. Dis. x Suc. (NPT) CP A BA C D E F K X Y Z ZO FBSE-5-S 1/ /4" x 1-1/4" 15.46" 4." 1.69" 9.86" 3.98" 2." 3." 7.61" 5.23" 3.25" 2." 7.5" FBSE-75-S 3/ /4" x 1-1/4" 15.96" 4." 1.69" 9.86" 3.98" 2." 3." 7.61" 5.23" 3.25" 2." 7.5" FBSE-1-S /4" x 1-1/4" 16.96" 4." 1.69" 9.86" 3.98" 2." 3." 7.61" 5.23" 3.25" 2." 7.5" FBSE-15-S 1-1/2 1 2" x 2" 17.91" 4.26" 1.69" 11." 3.98" 2." 3." 8.36" 5.44" 3.17" 2.13" 8.5" FBSE--S 2 1 2" x 2" 19.16" 4.26" 1.69" 11." 3.98" 2." 3." 8.36" 5.44" 3.17" 2.13" 8.5" FBSE-3-S 3 2 2" x 2" 19.23" 4.26".85" 11.44" 4.38" 2.13" N/A 8.37" 6.69" 3.17" 2.13" 8.5" FBSE-3-T 3 2 2" x 2".43" 4.26".85" 11.44" 4.38" 2.13" N/A 8.37" 6.69" 3.17" 2.13" 8.5" NOTE: Dimensions are for estimating purposes only FIG. 1 FIG. 2 CP DISCHARGE A X 3/4" NPT Z PRIMING PLUG Y SUCTION 4X.44 D K C FEATURES ORDERING INFORMATION DIMENSIONS 4X.5 CP X Y A Z D F BA 3/4" NPT DRAIN PLUG E ZO E BA 2X.44 DIA. E ZO E 22

25 SELF-PRIMING EFFLUENT PUMPS - FBSE SERIES PERFORMANCE HEAD (FEET) 4 FBSE-75 3/4 HP FBSE-5 1/2 HP FBSE /2 HP FBSE-1 1 HP FBSE- 2 HP FBSE-3 3 HP FLOWRATE (USGPM) Discharge Pressure (PSI) Model HP Shut-off Head (ft) Gallons Per Minute (GPM) FBSE-5 1/ FBSE-75 3/ FBSE FBSE / FBSE FBSE

26 BOOSTER PUMPS Franklin s booster pumps feature a stainless steel construction and are designed to meet any pressure-boosting need. The selection is available in a range of horsepower sizes, in single- and three-phase configurations, and offer high performance for a wide variety of applications. Whether boosting water pressure from a city main or a private water system, Franklin s quality pumps will fulfill the task. PRODUCT FAMILY MH Series BT4 Series BT4 Series 56C Pump Ends APPLICATIONS Pressure Boosting (from city mains or private water systems) Water Transfer and Circulation Lawn and Crop Irrigation Residential Lawn Sprinkler Systems Reverse Osmosis (MH/SS BT4) Filtration (SS BT4) Pressure Washing Poultry Houses Equipment Spray Cooling Evaporative Cooling System Misters General Purpose Plumbing Aeration Wash-Down Applications Commercial Water Features and Fountains Cisterns FAMILY COMPARISON CHART Model Performance MH Series Shut-off PSI 14 Max. GPM 64 BT4 Series Shut-off PSI 326 Max. GPM 32 24

27 MULTI-STAGE BOOSTER PUMPS - MH SERIES FEATURES 3-series stainless steel wet end FKM mechanical shaft seal for added chemical resistance High quality, industry proven, UL778 approved, indoor/outdoor square-flange motors; three-phase inverter duty rated Available in 15, 3, and 45 gpm flow rates High pressure capability of 14 psi Able to pump fluids at temperatures up to 225 F Can operate in suction lift installation up to 1 feet ORDERING INFORMATION Model No. HP Phase Dis. x Suc. (NPT) Stage GPM Voltage Order No. Wt. (lbs) 15FMH5S2 1/ FMH7S3 3/ FMH1S4 1 1" x 1-1/4" FMH15S5 1-1/ FMH2S FMH7S2 3/ / FMH1S " x 1-1/4" 3 3FMH15S4 1-1/ FMH2S FMH15S2 1-1/ /4" x 1-1/2" 45 45FMH2S FMH5S2-T 1/ FMH7S3-T 3/ FMH1S4-T 1 1" x 1-1/4" FMH15S5-T 1-1/ FMH2S6-T FMH7S2-T 3/ / FMH1S3-T " x 1-1/4" 3 3FMH15S4-T 1-1/ FMH2S5-T FMH15S2-T 1-1/ /4" x 1-1/2" 45 45FMH2S3-T

28 MULTI-STAGE BOOSTER PUMPS - MH SERIES DIMENSIONS Model HP Phase GPM Stage A B C 15FMH5S2 1/ " 8.75" 16.75" 15FMH7S3 3/ " 8.75" 17.5" 15FMH1S " 9.69" 19.7" 15FMH15S5 1-1/ " 1.64".81" 15FMH2S " 11.58" 22.59" 3FMH7S2 3/ " 8.75" 17.5" 3FMH1S " 8.75" 19." 3 3FMH15S4 1-1/2 4 5." 9.69".7" 3FMH2S " 1.64" 21.64" 45FMH15S2 1-1/ " 9.34" 19.67" 45 45FMH2S " 9.34".5" 15FMH5S2-T 1/ " 8.75" 16.97" 15FMH7S3-T 3/ " 8.75" 17.62" 15FMH1S4-T " 9.69" 18.92" 15FMH15S5-T 1-1/ " 1.64".78" 15FMH2S6-T " 11.58" 22.56" 3FMH7S2-T 3/ " 8.75" 17.62" 3FMH1S3-T " 8.75" 18.85" 3 3FMH15S4-T 1-1/2 4 5." 9.69".67" 3FMH2S5-T " 1.64" 21.61" 45FMH15S2-T 1-1/ " 9.34" 19.64" 45 45FMH2S3-T " 9.34".47" C A 4." 8." 2." B 4.9" 7." 26

29 MULTI-STAGE BOOSTER PUMPS - MH SERIES PERFORMANCE - 15 GPM FEET 8 25 GPM OPERATING RANGE HP 3 15 NPSH /2 HP 1 1 HP HEAD 15 3/4 HP 1 1/2 HP 5 1. GPM 25 FT FLOW GPM Model 15FMH5S2 15FMH5S2-T 15FMH7S3 15FMH7S3-T 15FMH1S4 15FMH1S4-T 15FMH15S5 15FMH15S5-T 15FMH2S6 15FMH2S6-T HP Total Head (ft) Capacities (GPM) 1/ / / Shut-off Head (PSI) 27

30 MULTI-STAGE BOOSTER PUMPS - MH SERIES PERFORMANCE - 3 GPM FEET 15 4 GPM OPERATING RANGE HP NPSH 1-1/2 HP HEAD 15 1 HP 1 3/4 HP 5 1. GPM 25 FT FLOW GPM Model 3FMH7S2 3FMH7S2-T 3FMH1S3 3FMH1S3-T 3FMH15S4 3FMH15S4-T 3FMH2S5 3FMH2S5-T HP Total Head (ft) Capacities (GPM) 3/ / Shut-off Head (PSI) 28

31 MULTI-STAGE BOOSTER PUMPS - MH SERIES PERFORMANCE - 45 GPM FEET GPM OPERATING RANGE NPSH 2 HP 15 HEAD 1 1-1/2 HP 5 2. GPM 25 FT FLOW GPM Model 45FMH15S2 45FMH15S2-T 45FMH2S3 45FMH2S3-T HP Total Head (ft) Capacities (GPM) 1-1/ Shut-off Head (PSI) 29

32 HIGH PERFORMANCE BOOSTER PUMPS - BT4 SERIES FEATURES Stainless steel discharge on all models Stainless steel or cast iron bracket with a rugged support foot for horizontal or vertical mounting and a handle for portability Built with Franklin s patented (U.S. patent) 7,29,984 Tri-Seal floating stage system, providing maximum efficiency, longevity, and performance Acetal impellers, Modified PPO diffusers, and 3-series stainless steel hub, eye seals, shaft, and shell Mechanical seal with standard phenolic/ceramic faces, FKM elastomers, and stainless steel components Industry-proven ODP square-flange motors easily serviced through a back pull-out design, leaving the pump and plumbing undisturbed in their original location High service factor, 1/2-3 hp, dual-voltage motors; three-phase inverter duty rated Shut-off pressures up to 27 psi, flow rates from 5-25 gpm, and temperatures up to 1 F/49 C ORDERING INFORMATION Model HP Phase Suc. x Dis. (NPT) GPM Construction Volts Order No. Wt. (lbs) 5FBT5S4-T 1/ FBT7S4-T 3/ / FBT1S4-T FBT5S4-T 1/ FBT7S4-T 3/ /46 7FBT1S4-T FBT15S4-T 1-1/ FBT5S4-T 1/ FBT7S4-T 3/ FBT1S4-T / FBT15S4-T 1-1/ FBT2S4-T FBT7S4-T 3/4 3 1" x 1" Stainless Steel FBT1S4-T /46 15FBT15S4-T 1-1/ FBT2S4-T FBT7S4-T 3/ FBT1S4-T FBT15S4-T 1-1/2 8-23/ FBT2S4-T FBT3S4-T FBT1S4-T FBT15S4-T 1-1/ /46 25FBT2S4-T FBT3S4-T

33 HIGH PERFORMANCE BOOSTER PUMPS - BT4 SERIES ORDERING INFORMATION Model HP Phase Suc. x Dis. (NPT) GPM Inlet Construction Volts Order No. Wt. (lbs) 5FBT5S4 1/ FBT7S4 3/4 Stainless Steel FBT1S FBT5C4 1/ FBT7C4 3/4 Cast Iron FBT1C FBT5S4 1/ FBT7S4 3/ Stainless Steel 7FBT1S FBT15S4 1-1/ FBT5C4 1/ FBT7C4 3/ Cast Iron 7FBT1C FBT15C4 1-1/ FBT5S4 1/ FBT7S4 3/ FBT1S4 1 Stainless Steel FBT15S4 1-1/ /23 1FBT2S FBT5C4 1/ FBT7C4 3/ FBT1C4 1 Cast Iron FBT15C4 1-1/ FBT2C FBT7S4 3/ " x 1" 15FBT1S Stainless Steel 15FBT15S4 1-1/ FBT2S FBT7C4 3/ FBT1C Cast Iron 15FBT15C4 1-1/ FBT2C FBT7S4 3/ FBT1S FBT15S4 1-1/2 Stainless Steel FBT2S FBT3S FBT7C4 3/ FBT1C /23 FBT15C4 1-1/2 Cast Iron FBT2C FBT3C FBT1S FBT15S4 1-1/2 115/ Stainless Steel 25FBT2S FBT3S FBT1C FBT15C4 1-1/2 115/ Cast Iron 25FBT2C FBT3C NOTE: Includes FKM mechanical seal and high service factor motor. 31

34 HIGH PERFORMANCE BOOSTER PUMPS - BT4 SERIES DIMENSIONS GPM HP Stage A B C D 1/ / / / / / / / / / / / / / / / / / / A 3.3 B 6.5 C 1.79 D 32

35 HIGH PERFORMANCE BOOSTER PUMPS - BT4 SERIES PERFORMANCE: 5 GPM METERS FEET 7 1 HP 18 6 PUMP OPERATING RANGE BEST EFFICIENCY RANGE /4 HP 14 HEAD /2 HP (PUMP END ONLY) 1/3 HP 6.5 GPM 5 FT FLOW GPM M 3 /H PERFORMANCE: 7 GPM METERS 24 2 FEET /2 HP PUMP OPERATING RANGE BEST EFFICIENCY RANGE HP HEAD 1 4 3/4 HP /2 HP GPM 5 FT FLOW GPM M 3 /H 33

36 HIGH PERFORMANCE BOOSTER PUMPS - BT4 SERIES PERFORMANCE: 1 GPM METERS FEET HP /2 HP 18 6 PUMP OPERATING RANGE BEST EFFICIENCY RANGE HP HEAD /4 HP 1/2 HP GPM 5 FT GPM FLOW M 3 /H PERFORMANCE: 15 GPM METERS FEET HP PUMP OPERATING RANGE BEST EFFICIENCY RANGE /2 HP 14 HEAD HP 3/4 HP 6 1 GPM 5 FT FLOW GPM M 3 /H 34

37 HIGH PERFORMANCE BOOSTER PUMPS - BT4 SERIES PERFORMANCE: GPM METERS FEET HP HP PUMP OPERATING RANGE BEST EFFICIENCY RANGE /2 HP HEAD HP 6 3/4 HP 2.5 GPM 5 FT FLOW GPM M 3 /H PERFORMANCE: 25 GPM METERS FEET HP PUMP OPERATING RANGE BEST EFFICIENCY RANGE HP /2 HP HEAD HP 5 FT GPM GPM FLOW M 3 /H 35

38 HIGH PERFORMANCE BOOSTER PUMPS - BT4 SERIES 56C PUMP ENDS FEATURES 56C standard motor bracket for use with any customer-supplied motor All stainless steel construction, including a stainless steel bracket with a rugged support foot for horizontal or vertical mounting and a handle for portability Built with Franklin s patented (U.S. patent) 7,29,984 Tri-Seal floating stage system, providing maximum efficiency, longevity, and performance Acetal impellers, Modified PPO diffusers, and 3-series stainless steel hub, eye seals, shaft, and shell Mechanical seal with standard phenolic/ceramic faces, FKM elastomers, and stainless steel components Shut-off pressures up to 27 psi, flow rates from 5-25 gpm ORDERING INFORMATION Model HP Suc. x Dis. (NPT) GPM Order No. Wt. (lbs) 5BT3S4-PE 1/ BT5S4-PE 1/ BT7S4-PE 3/ BT1S4-PE BT5S4-PE 1/ BT7S4-PE 3/ BT1S4-PE BT15S4-PE 1-1/ BT5S4-PE 1/ BT7S4-PE 3/ BT1S4-PE BT15S4-PE 1-1/ BT2S4-PE BT5S4-PE 1/ " x 1" 15BT7S4-PE 3/ BT1S4-PE BT15S4-PE 1-1/ BT2S4-PE BT5S4-PE 1/ BT7S4-PE 3/ BT1S4-PE BT15S4-PE 1-1/ BT2S4-PE BT3S4-PE BT1S4-PE BT15S4-PE 1-1/ BT2S4-PE BT3S4-PE

39 TRANSFER PUMPS For times when transferring water is required, Franklin offers a wide variety of pumps that accomplish most any task. Whether circulating water or other liquids, Franklin s transfer pumps have a range of horsepowers in single- and three-phase configurations to complete the job. Throughout the selection, the centrifugal pumps and motors are available for indoor and outdoor use with UL approvals. PRODUCT FAMILY DDS Series FCE Series A Series S Series JCM Series APPLICATIONS Pressure Boosting Water Transfer General Purpose Water Features Fountains General Dewatering Aquariums (A Series, S Series, JCM Series) FAMILY COMPARISON CHART Model Performance DDS Series Shut-off PSI 51 Max. GPM 62 FCE Series Shut-off PSI 54 Max. GPM 1 S Series Shut-off PSI 31 Max. GPM 89 A Series Shut-off PSI 29 Max. GPM JCM Series Shut-off PSI 27 Max. GPM 88 37

40 STAINLESS STEEL TRANSFER PUMPS - DDS SERIES FEATURES Stainless steel construction on all models Back pull-out design provides access to internal parts without disturbing the plumbing Mechanical shaft seal ensures a leakproof fit and continuous water lubrication Maximum temperature of 14 F/6 C and a maximum working pressure of 5 psi Square-flange, open drip-proof motor for easy service and reliability Enclosed impeller design for increased efficiencies FKM mechanical shaft seal for added chemical resistance 34 stainless steel case and seal plate ORDERING INFORMATION Dis. x Suc. Single-Phase (115/23 V) Three-Phase (8-23/46 V) Pump End Kits HP (FNPT) Model Order No. Wt. (lbs) Model Order No. Wt. (lbs) Model Order No. Wt. (lbs) 1/2 5FPDDS1-S FPDDS1-T /4 7FPDDS1-S FPDDS1-T " x 1-1/4" FPDDS1-K R FPDDS1-S FPDDS1-T /2 15FPDDS1-S FPDDS1-T DIMENSIONS Model HP A B C D E F G H 5FPDDS1-S 5FPDDS1-T 1/ " 7FPDDS1-S 7FPDDS1-T 3/ " 1FPDDS1-S 1FPDDS1-T " 2.38" 5.31" 4.44" 3.5" 4.63" 8.75" 5.5" 15FPDDS1-S 15FPDDS1-T 1-1/ " A B E D 1.31" 1.88" 2.75" 1.81" F 2." H G.41".56" 5.5" 2." C.47" 4.44" 6.5" 38

41 STAINLESS STEEL TRANSFER PUMPS - DDS SERIES PERFORMANCE PSI FEET BEST EFFICIENCY RANGE HEAD /2 HP 3/4 HP 1 HP 1-1/2 HP /2 to 1-1/2 HP 5 NPSHR FLOW GPM Model 5FPDDS1-S 5FPDDS1-T 7FPDDS1-S 7FPDDS1-T 1FPDDS1-S 1FPDDS1-T 15FPDDS1-S 15FPDDS1-T HP Total Head (ft) Capacities (GPM) 1/ / / Shut-off Head (ft) 39

42 CAST IRON TRANSFER PUMPS - FCE SERIES FEATURES Three-way, cast iron volute can be rotated for ease of installation Modified PPO impeller with stainless steel hub for efficiency and performance Powered by high quality, industry proven, UL778 approved, indoor/outdoor squareflange motors Built-in drain plug for easy winterizing and servicing Can be mounted in a vertical or horizontal position. Shut-off pressures up to 124 feet and flow capacities up to 1 gpm Handles water temperatures up to 16 F/71 C ORDERING INFORMATION Single-Phase Three-Phase Pump Kits HP Dis. x Suc. (FNPT) Model Voltage Order No. Wt. (lbs) Model No. Voltage Order No. Wt. (lbs) Model No. Order No. Wt. (lbs) 1/2 1" x 1-1/4" FCE5CI 115/ FCE5CI-T /4 1" x 1-1/4" FCE7CI 115/ FCE7CI-T CE7CI-PE " x 1-1/4" FCE1CI 115/ FCE1CI-T /46 1-1/2 1" x 1-1/4" FCE15CI 115/ FCE15CI-T CE15CI-PE /2" x 1-1/4" FCE2CI FCE2CI-T CE2CI-PE DIMENSIONS Model HP CP D E F L M N OP X Y FCE5CI FCE5CI-T 1/ FCE7CI FCE7CI-T 3/ FCE1CI FCE1CI-T FCE15CI FCE15CI-T 1-1/ FCE2CI FCE2CI-T NOTE: Dimensions are for estimating purposes only Y M N D OP X F CP L E 4

43 CAST IRON TRANSFER PUMPS - FCE SERIES PERFORMANCE FEET HP 1-1/2 HP 1 HP 3/4 HP 1/2 HP HEAD FLOW GPM Total Head (ft) Model HP Shut-off Head (ft) Capacities (GPM) FCE5CI / FCE5CI-T 1/ FCE7CI / FCE7CI-T 3/ FCE1CI / FCE1CI-T FCE15CI / FCE15CI-T 1-1/ FCE2CI / FCE2CI-T

44 NON-CORROSIVE TRANSFER PUMPS - S SERIES FEATURES Non-corrosive plastic construction and stainless steel for components in contact with liquid Motor shaft is completely insulated from any contact with pumping liquid Nitrile and stainless steel mechanical seal with ceramic/carbon faces Patented, air-cooled heat sink allows pump to run dry or in loss-of-prime conditions without damage to the shaft seal Unconditional two-year warranty against seal failure Floating eye seal on the impeller maximizes pump efficiency for best flow and pressure Accepts a standard 1-1/2" union (ordered separately) or a male 1-1/2" pipe thread UL and CSA agency listing applies to clean water applications only ORDERING INFORMATION Model HP Dis. x Suc. (MNPT) Voltage Order No. Wt. (lbs) S7KM 3/ S1KM /2" x 1-1/2" S15KM 1-1/ S2M 2 115/ Fittings kit contains (2) 1-1/2" slip x threaded connection union halves NOTE: Set of union halves must be purchased separately DIMENSIONS Model HP A C S7KM 3/ " 7.19" S1KM " 7.19" S15KM 1-1/ " 7.69" S2M " 7.13".25" 4.13" 7.75".5" 3.5" 3." A C 4.88" 6.5" 42

45 NON-CORROSIVE TRANSFER PUMPS - S SERIES PERFORMANCE PSI FEET HP 6 1-1/2 HP INCREMENTAL PRESSURE INCREASE HP 3/4 HP 5 GPM 5 FT GPM FLOW Total Head (ft) Model HP Shut-off Head (ft) Capacities (GPM) S7KM 3/ S1KM S15KM 1-1/ S2M

46 NON-CORROSIVE TRANSFER PUMPS - A SERIES FEATURES High-tech, non-corrosive plastic construction and stainless steel for components in contact with liquid Motor shaft is completely insulated from any contact with pumping liquid Standard 2" union connections (ordered separately) ensure easy service and optimum water flow Three-way volute discharge port rotates at 9 increments without removing motor Lightweight design ORDERING INFORMATION Model HP Dis. x Suc. (MBPT) Voltage Order No. Wt. (lbs) S2A 2 115/ S3A S35A 3-1/2 2" x 2" S4A S45A 4-1/ Fittings kit contains (2) 2" slip x threaded connection union halves NOTE: Set of union halves must be purchased separately. DIMENSIONS Model HP A D E S2A " 3.38" 7.94" S3A " 3.38" 8.6" S35A 3-1/ " 3.5" 8.6" S4A " 3.5" 8.6" S45A 4-1/2 17.5" 3.5" 8.6".25" 2.13" 7.44".25" 4.88" 44

47 NON-CORROSIVE TRANSFER PUMPS - A SERIES PERFORMANCE METERS PSI FEET BEST EFFICIENCY RANGE INCREMENTAL PRESSURE INCREASE HP 4 HP 4-1/2 HP 3-1/2 HP 3 HP 5 GPM 5 FT GPM L/SEC M 3 /H FLOW Model HP Total Head (ft) Capacities (GPM) S2A S3A S35A 3-1/ S4A S45A 4-1/ Shut-off Head (ft) 45

48 NON-CORROSIVE TRANSFER PUMPS - JCM SERIES FEATURES High-tech, non-corrosive plastic construction and stainless steel for components in contact with liquid Patented, air-cooled heat sink allows pump to run dry or in loss-of-prime conditions without damage to the shaft seal Floating eye seal between the closed impeller and the pump case maximizes pump efficiency for best flow and pressure Accepts a standard 1-1/2" union (ordered separately) UL and CSA agency listings apply to clean water applications only ORDERING INFORMATION Model HP Dis. x Suc. (MNPT) Voltage Full Load Amps Order No. Wt. (lbs) S7JCM 3/ S1JCM S15JCM 1-1/ S2JCM 2 115/ / /2" x 1-1/2" S7JCM-A3* 3/ S1JCM-A3* S15JCM-A3* 1-1/ S2JCM-A3* (2) S15UNS Straight Union * Built-in air switch and 3 cord with standard three-prong plug DIMENSIONS Model HP A S7JCM / S7JCM-A3* 3/ " S1JCMt / S1JCM-A3* " S15JCM / S15JCM-A3* 1-1/2 17.6" S2JCM / S2JCM-A3* " NOTE: Dimensions will vary according to motor manufacturer.25" 5.75" 7.5".5" 1.75" 3." A 8.88" 4." 6.25" 46

49 NON-CORROSIVE TRANSFER PUMPS - JCM SERIES PERFORMANCE METERS PSI FEET HP 6 1-1/2 HP 25 INCREMENTAL PRESSURE INCREASE HP 3/4 HP GPM 5 FT GPM L/SEC M 3 /H FLOW Model HP Total Head (ft) Capacities (GPM) S7JCM / S7JCM-A3* 3/ S1JCMt / S1JCM-A3* S15JCM / S15JCM-A3* 1-1/ S2JCM / S2JCM-A3* Shut-off Head (ft) 47

50 NOTES 48

51

52 franklinwater.com M