Valves, Pipe Fittings, Gas Equipment, Hose & Clips

Transcription

1 Section Contents Valves, Pipe Fittings, Gas Equipment, Hose & Clips SECTION 2- Aquafax Packaging Options 4-8 Ball Valves 9-0 Valves/Filters -6 Hose Connectors & Pipe Fittings 7 Fuel Hoses, Copper & Nylon Tubing 8-9 PVC, Sanitation & Ducting Hoses Hose Clamps/Clips 2-27 Compression Fittings 28-4 Gas Fittings & Equipment Washers, Saddle Clamps, O Rings/Clips & Tube Clips Six Depots Nationwide Aquafax Limited, 4 Dencora Way, Sundon Business Park, Luton, Beds LU HP Tel:(082) Fax:(082) Aquafax Ltd. (Hamble), -2 Mitchell Point, Ensign Business Park, Hamble, Southampton SO 4RF Tel:(02) Fax:(02) Aquafax Ltd. (Plymouth), Unit Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU Tel:(072) Fax:(072) Aquafax Ltd. (Middlewich), Unit, Valley Court, Sanderson Way, Middlewich, Cheshire CW0 0GF Tel:(0606) 84 Fax:(0606) 8488 Aquafax Ltd. (Wroxham), Unit, Stalham Road Ind. Estate, Littlewood Lane, Hoveton, Norfolk NR2 8DZ Tel:(060) 7888 Fax:(060) 7898 Marinac Scotland (Aquafax Glasgow), 0-0 Barrie Road, Hillington Park, Glasgow G2 4PX Tel: (04) 8827 Fax: (04) 88 CATALOGUE H SECTION

2 Aquafax Packaging Aquafax offers many products packaged - either skin packed onto a display card, blister packed or bagged with a header card. All options feature a Euro slot for hanging. HOW TO ORDER The new part number will be the existing part number plus the letter P on the end which denotes a packaged item. i.e when carded is 2-600P. DISPLAY PACKAGING A price list of these products is currently available, but we will also consider any other products you would like carded and we will arrange a suitable packaging option for the product. Please state on your order form if you want an item carded as it will cost slightly more. Also, please allow an extra 24 hours for carded products. All products are bar-coded with a unique number. These packaging options are available for all sections of the Aquafax catalogue. DISPLAY STANDS We have white, revolving display stands available. These are issued free on loan with a 600 stocking order. Blank cards stating the part for re-ordering are available on request. Three sided revolving display Supplied with 40 detachable hooks Height:.7m Width: 0.7m 2 SECTION

3 Aquafax Packaging DISPLAY PACKAGING These packaging options are available for all sections of the Aquafax catalogue. Examples of specially assembled packaged products METRE ORANGE GAS HOSE TO BS22 (TYPE 2) Description -902/KP m Orange Gas Hose 8.0mm ID + 2x S/S Hose Clips (-886) -90/KP m Orange Gas Hose 0mm ID + 2x S/S Hose Clips (-8820) ISO 7840 A FUEL HOSE WITH S/S HOSE CLIPS M Description -7820/KP Fuel Hose 6mm ID + 2x S/S Hose Clips (-882) -782/KP Fuel Hose 8mm ID + 2x S/S Hose Clips (-886) -7822/KP Fuel Hose 0mm ID + 2x S/S Hose Clips (-8820) 0 ASSORTED COPPER WASHERS -960P Contains: x 8" BSM (-9600) 4 x 4" BSM (-960) x 8" BSM (-9602) 2 x 2" BSM (-960) 0 ASSORTED BRASS COMPRESSION RINGS -900P Contains: 2 x 4" (-904) x 6" (-90) x 8" (-906) 2 x 2" (-907) 0 ASSORTED COPPER COMPRESSION RINGS -900P Contains: 2 x 4" (-9024) x 6" (-902) x 8" (-9026) 2 x 2" (-9027) NOTE: We will also consider any other products you would like carded and we will arrange a suitable packaging option for the product. SECTION

4 DZR Brass & Bronze Ball Valves ISIS DZR BALL VALVE The ISIS is a robust, dezincification resistant ball valve that is particularly suitable for those installations where high aggressive water causes causes zinc leaching in the standard brass alloys and weakens the material molecular structure. Features: Dezincification resistant materials Blow-out proof stem Full bore Very fast opening/closing in case of emergency No maintenance - equipped with wrapping seats ensuring long life cycles Antifriction ring forms the first automatic sealing at high pressure Two self adjusting cone shaped seals, with Teflon sliding for second sealing at low pressure O ring in EPDM for sealing at low pressure and vacuum All valves are tested according to a strict procedure covering severe inspections on the entire production BSP A B C L D Bore 4" mm " mm " mm " mm " mm " mm " mm " mm " mm " mm " mm BALL VALVES L A Suitable for: Inlet for cooling engines Generators Air conditioning Refrigeration units Deck drain outlets Exhaust outlets Seawater inlets for toilets Seawater outlets for toilets Temperature Limits: Fluids: - C to +20 C Pressure Limits: Fluids: 2 Bar Thread: Female Parallel Thread ISO 228/ D C B Dezincification Resistance Why Specify DZR Copper Alloy? In certain aggressive water supplies, the dezincification of brass valves used to be a problem. However, with the introduction of the ISIS Ball Valve range in dezincification resistant copper alloy (CZ2) the use of more expensive alternatives can be avoided. ISIS protects against the leaching of zinc that can result in the failure of brass components. Also avoided is the risk of blockage due to the formation of a soft, white meringue corrosion product containing basic-zinc carbonate. Dezincification resistant copper, alloy is now specified in BS EN 26, the alloy being designated CW602N (CZ2). The symbol above indicates that ISIS valves have been manufactured to be dezincification resistant and will satisfy the requirements of the British Standard dezincification test. Dezincification resistance of CW602N (CZ2) alloy is maintained in seawater high in chlorides and other aggressive agents. Lloyds Register of Shipping Yacht and Small Craft Department accept the use of DZR copper alloy in through-hull fittings. Materials: Body & Threaded End: DZR Copper alloy CW602N (UNI EN 26) Gland: DZR Copper alloy CW64N (UNI EN 264) Stem: DZR Copper alloy CW602N (UNI EN 264) Ball: Chrome Plated DZR Copper alloy CW602N (UNI EN 264) Seals: Pure PTFE (Teflon) O-ring: EPDM Lever: Zinc plated steel, PVC coated Grip Fixing Nut: Zinc plated steel BRONZE BODIED BALL VALVES FF PN2 full flow lever ball valve Female Parallel Thread: BSP = IS07/(BS2) Lever handle zinc plated steel, PVC coated grip Smaller sizes available but we recommend the DZR ball valve above Materials: Body: Bronze Gland: Brass CW 64N Stem: Brass CW 64N Ball: Chrome Plated Brass BSP A D L H M 2 2" " OTHER SIZES AVAILABLE 4 SECTION

5 Gas Ball Valves GAS BALL VALVES A quality Italian made, high specification ball valve. Ideal for gas. Also suitable for hot & cold water, compressed air, pneumatic, hydraulic, and most industrial fluids. Materials: Body: Nickel plated brass CW 67N Ball: Hard chrome-plated brass CW 67N Stem: Brass CW 64N Seal: Pure teflon (P.T.F.E) O Rings: Viton / NBR Lever handle: Yellow coated zinc-plated steel Fe.P04 Tee handle: Yellow coated aluminium UNI 076 BALL VALVES FOR GAS Features: Quarter turn operation 00% full bore Individually tested EN approved Working Temperatures: -20 C to +60 C* * Warning: the formation of ice can severely damage valves & piping Technical Specifications: Male: BSP Taper Thread - ISO 7/R BS2 DIN 2999 Female: BSP Parallel Thread ISO 7/Rp BS2 DIN 2999 (equivalent to DIN EN and BS EN 0226-) Bar* - Pressure Atmosphere kg/cm PSI* - LBS working pressure Box* - All valves are sold & priced as each. Box quantities shown are for information purposes. FEMALE/FEMALE LEVER BSP A B C D E CH Bar* PSI* Box* 4" " " FEMALE/FEMALE TEE BSP A B C D E CH Bar* PSI* Box* 4" " " " MALE/FEMALE TEE BSP A B C D E CH Bar* PSI* Box* 4" " " NOTE: All valves are sold and priced as each. Box quantities shown are just for information purposes MINI GAS/DIESEL BALL VALVES COMPRESSION x COMPRESSION OR 8MM NOZZLE A range of mini gas ball valves with integral foot mount. These valves are designed for pipe to pipe applications or hose to copper pipe with an integral foot mount for a secure hold without additional pipe supports. All come complete with nuts and brass olives. For use with propane, butane, natural gas and diesel oil. Technical Specifications Body material: forged brass nickel plated Ball material: brass nickel/chrome plated Body seal: Teflon PTFE Shaft seal: nitrile 2 x NBR (max. temp + 90ºC) Operating temperature: -20ºC to +60ºC Max. operating pressure: 20 bar Anti-blow out stem with /4 turn positive shut-off Full bore operation - minimum pressure drop 00% factory tested Conforms to European Standard for Gas Valves - EN :99 Also suitable for diesel Compression x Compression x Hose ID 4" 4" " 6" -90 8" 8" mm -922 NOTE: IF INSTALLING IN A GAS SYSTEM USING COPPER PIPE THE BRASS OLIVES MUST BE EXCHANGED FOR COPPER OLIVES TO COMPLY WITH EN ISO 029:2000 (6.2.4) Description " pack of 0 Copper compression olives " pack of 0 Copper compression olives " pack of 0 Copper compression olives SECTION

6 Lever, Tee & L Port Ball Valves BALL VALVES Good quality Italian made full flow ball valves at competitive prices. Suitable for industrial, pneumatic & hydraulic installations, including gasoline, fuel oils, kerosene, petrol & diesel. Ideal for hot & cold water, different oils & compressed air. Minimum 00,000 operation design 90 degree movement by either lever or tee handle Materials: Body: Nickel plated brass CW 67N Ball: Hard chrome-plated brass CW 67N Stem: Brass CW 64N Seal: Pure teflon (P.T.F.E) O Rings: Viton / NBR Lever handle: Red coated zinc-plated steel Fe.P04 Tee handle: Red coated aluminium UNI 076 Working Temperatures: -20 C* to 0 C in absence of steam * Warning: the formation of ice can severely damage valves & piping Technical Specifications: BSP Parallel Thread - ISO 228 (equivalent to DIN EN ISO 228 & BS EN ISO 228) Bar* - Pressure Atmosphere kg/cm PSI* - LBS working pressure Box* - All valves are sold & priced as each. Box quantities shown are for information purposes. FEMALE/FEMALE LEVER BSP A B C D E Bar* PSI* Box* 4" " " " " " " " " " " MALE/FEMALE LEVER BSP A B C D E Bar* PSI* Box* 4" " " " " " " " FEMALE/FEMALE TEE BSP A B C D E Bar* PSI* Box* 4" " " " " MALE/FEMALE TEE BSP A B C D E Bar* PSI* Box* 4" " " " " The direction of the flow is shown by the marking on the lever. Position A: from Position B the handle is operated by a clockwise quarter turn. Position B: from Position A the handle is operated by an anticlockwise quarter turn. Position A Position B L PORT BALL VALVES Made in nickel plated brass (CW67N), with chromed brass ball (CW67N), P.T.F.E. seats and aluminium alloy handle. L port allows two of three ports open only. i.e. for diverting 0 bar maximum pressure limit For fluids from -0ºC to +00ºC Full bore G/BSP A B ØC ØD E L L Port 4'' '' '' '' '' '' '' '' G/BSP = Female Taper Thread ISO 7/ (UNI EN 0226) 6 SECTION NOTE: All valves are sold and priced as each. Box quantities shown are just for information purposes.

7 T Port, Y & Lever Ball Valves & Bracket BALL VALVES PN6 T PORT BALL VALVES Made in nickel plated brass, with chromed ball, P.T.F.E. sealing and painted pressed steel levers. T port allows as L port or allows all ports open. G/BSP A D L H M T Port 4'' '' '' '' '' '' '' '' G/BSP = Female Taper Thread ISO 7/ (BS2) Y BALL VALVE DOUBLE OUTLET Nickel plated brass body & polished Chrome ball in Brass Teflon sealing with plasticized steel lever G*/BSP G A/A H M 2'' 8'' x 8'' '' 2'' x 2'' '' 4'' x 4'' '' '' x '' G/BSP = Female Parallel Thread ISO 228/ (BS 2779) BALL VALVES High Specification PN0 Rated Forged Brass Body, Nickel plated Nickel Chrome plated mirror finish solid ball Plated Steel lever handle with plastic grip Full Flow G/BSP Parallel Female Thread ISO 228/ (BS 2779) G/BSP D L H M 8" " " " " " STAINLESS STEEL BALL VALVES Use as an ON-OFF valve for chemical products, water and pneumatic installations, gas, water, vacuum. BRASS HANDLED BALL VALVES A good quality valve with nickel plated brass lever handle which won t rust or corrode like normal commercial models. Full flow, PN 40 rated Made in brass with nickel plated body PTFE Seat G/BSP Parallel Female Thread ISO 228/ (BS 2779) Working Temperature: -20ºC to 0ºC G/BSP A D L H M 4'' '' '' '' '' '' '' '' '' Full flow monobloc design AISI 6 Stainless Steel PTFE seals Temperature limits: -20ºC to 0ºC Blow-out proof stem BSP Parallel Thread ISO 7/Rp - DIN 2999 BSP Bar 4'' '' '' '' '' '' '' Larger sizes to order BALL VALVE BRACKET Brass R/Angle bracket drilled for compression fitting, securing when threaded into valve, at each end. Two hole base fixing. Description For 4'' BSP Valves For 8'' BSP Valves For 2'' BSP Valves SECTION 7

8 Ball Valves BULKHEAD FITTING BALL VALVE Suitable for: industrial pneumatic and hydraulic installations. Ideal for hot/cold water, different oils and compressed air. Useful for shower, or fuel taps, particularly cockpit fitting Max. bulkhead thickness 2mm Exterior chromed brass lever and s/s back plate F/F BSP Parallel Thread ISO 228 Working Temperatures: 0 C* to 0 C in absence of steam. * Warning: The formation of ice can severely damage this valve FOOT VALVE Case in brass with slotted base for water entry but not debris. Threaded BSP fitting to pipe or hose connectors G*/BSP Parallel Female Thread ISO 228/ (BS2779) BALL VALVES AND MISCELLANEOUS VALVES BSP A B C D E F G H Bar PSI 2" " Other sizes available to order G*/BSP H D 4" " " " " TOTAL BALL VALVE FF TEE HANDLE Suitable for: gas & water distribution, industrial & domestic heating, hydraulics, oil, steam & vacuum. Full bore with perfect air bubble sealing No maintenance - equipped with wrapping seats ensuring long life cycles Four self-adjusting cone-shaped seals, with PTFE-PTFE sliding eliminating wear, form two sealing with automatic functioning An adjusting gland allows the sealing reset on the stem Materials: Body & threaded end: Nickel plated Brass CW 67N Gland & gland nut: Nickel plated Brass CW 64N Stem: Brass CW 64N Ball: Chrome plated Brass CW 64N Seals: Pure PTFE (Teflon) Tee Handle: Black coated Aluminium UNI 076 Fixing screw: Zinc plated steel Temperature Limits: for fluids: -20ºC to +0ºC for gas: -20ºC to +60ºC Pressure Limits: for fluids: 64 bar for gas: PN4 TOTAL BALL VALVE FF LEVER HANDLE As above but with lever handle. BSP OA Length Body inc. handle Length 8" 99mm 48mm BSP Length 8" 0mm " mm BSP Thread: Female ISO7/ (BS2) PUSH BUTTON VALVE Cast in brass with heavy S/S spring which keeps valve open when pushed 8" BSP Parallel Female Threads ISO 228/ (BS 2779) SYPHON BREAK VALVE Suitable for exhausts, engine inlet, water systems etc. Nickle plated brass body with neoprene ball and cap washer. G/BSP G H L B 2" 8" G/BSP Parallel Thread ISO 228/ (BS 2779) G/BSP L A H SW 8" SECTION

9 DRAIN COCKS DRAIN COCK Chrome plated brass 4" BSP 8" ID Hose connection T handle operated Max Working Temperature: 80ºC Thread ISO 228 Drain Cocks, Check Valves & Filters G/BSP A B C Bar* PSI* 4" Bar* - Pressure Atmosphere kg/cm PSI* - LBS working pressure G/BSP P B L A H 4" DRAIN COCK BALL VALVE Chrome plated brass ball valve with plastic lever allowing compact fitting. 4" BSP Male Parallel Thread ISO 228/ (BS 2779) 2" hose barb CHECK VALVES & FILTERS BRASS SWING CHECK VALVE Integral metal seat and swing type disk for vertical or horizontal fixing Working temperature: 0ºC to 90ºC BSP Parallel Thread ISO 228 BSP A B Bar* PSI* Part No 8" " " " " " " " " " Bar* - Pressure Atmosphere kg/cm PSI* - LBS working pressure DRAIN COCK Solid brass Needle valve action by knurled knob opening 2mm dia. vent/outlet 6mm 8" BSP male parallel Length Length Closed Open mm mm -77 PEGLER BRONZE SWING CHECK VALVE Integral metal seat and swing type disk for horizontal or vertical fixing (upward flow only) Body arrow indicates direction of flow Suitable for steam, water & oil BSP Taper Thread ISO7 - (BS2) Manufactured to BS 4 PN2 Series B BSP A B Part No 2" " " " " " " SPRING CHECK VALVE Suitable for hot water, oils, compressed air. Inline spring operated. Universal mounting Body: Hot pressed brass Stem Seat: Nylon/Glass Fibre Seat: Rubber GSCB/0-B Spring: 8/8 Stainless Steel ISO 228 Working Temperature: -20ºC to 00ºC BSP D H Bar PSI 8" " " " " " " INLINE Y TYPE STRAINER Cast brass body with hex ended threaded BSP parallel ports. Stainless steel filter gauze with perforations approx. 9 to Linear C.M. Filter removable through hex head cap G*/BSP Parallel Threads ISO 228 G*/BSP H L 8" " " " " " " SECTION 9

10 Gate Valves GATE VALVES PEGLER FULL BORE GATE VALVES (BS 4B) Non rising stem High quality lubricated packing in the gland which may be re-packed under pressure with valve fully open Kitemarked BS 4 Pressure Limit: PN20 Suitable for steam, water and oil WHEEL HANDLES For gate valves Red plastic coated alloy Square tapered socket. (W2 Iron). Approx. sizes. Bronze BSP A B C D Parallel 8" " " " " " Specification Body Bronze Bonnet Brass Stem Brass Gland & Nut Brass Handle Aluminium Parallel Thread ISO 228 (BS 2779) Square O.Dia. Type 6mm mm W -70 7mm 6mm W mm 70mm W4-70 8mm 80mm W mm 90mm W6-70 0mm 00mm W7-706 mm mm W8-707 BRASS GATE VALVES Suitable for industrial & hydraulic installations. Ideal for hot/cold water & different oils. Technical Specifications: BSP Parallel Thread - ISO 228 Bar* - Pressure Atmosphere kg/cm PSI* - LBS working pressure Working Temperature: 0 C to 20 C (in absence of steam) BSP A B C D E F Bar* PSI* 4" " " " " " " " " " BRONZE GATE VALVES Suitable for industrial & hydraulic installations. Ideal for hot/cold water & different oils. Technical Specifications: BSP Parallel Thread - ISO 228 Bar* - Pressure Atmosphere kg/cm PSI* - LBS working pressure Working Temperature: 0 C to 20 C (in absence of steam) BSP A B C D E F Bar* PSI* 4" " " " " " " " " " BRONZE LEVER GATE VALVES Quick closing gate valve 4 Turn of a lever opens solid wedge Suitable for oil and water Bronze body with S/S spindle Painted alloy lever G/BSP* Parallel Thread: ISO 228/ BS 2779 Other Sizes Available To Order G/BSP* A D L H B 2" " " " " SECTION

11 BRONZE HOSE CONNECTORS Bronze & Brass Hose Connectors BRASS HOSE CONNECTORS HOSE CONNECTOR Cast in Bronze with hex shoulder and serrated tail BSP Parallel Male Thread STRAIGHT TYPE BSP Hose 2'' 2'' -72 4'' 4'' -722 '' '' -72 4'' 4'' '' 2'' -72 2'' 2'' '' 2 2'' -727 '' '' '' 4'' DEGREE BEND TYPE 90º HOSE CONNECTOR 90 Degree full bore Hot stamped in DZR Brass BSP Parallel Male Thread BSP Hose BSP Hose 2'' 2" -72 2" 4" " 4" -722* 4" " " " -72* " 4" " 4" -724* 4" 2" " 2" -72* 2" 2" -726 * Available with NPT Thread - ask for details 4 Degree full bore Hot stamped in DZR Brass BSP Parallel Male Thread 90º HOSE CONNECTOR 90 Degree full bore Hot stamped in DZR Brass BSP Hose 8" 2" " 4" " " " 4" " 2" º HOSE CONNECTOR BSP Hose 2" 4" " " " 4" " 2" CAP & TAIL HOSE CONNECTOR Cast in Bronze, with hex. nut & loose serrated tail including rubber washer STRAIGHT TYPE BSP Hose 2'' 2'' '' 4'' '' '' '' 4'' '' 2'' '' 2'' BRONZE HOSE CONNECTORS BSP Taper Male Thread Hex Shoulder BSP Hose ID mm 2" " " " " " " " " " DEGREE BEND TYPE BSP Hose 2" 2" " 4" " " " 4" " 2" 2" 2" BSP Hose ID mm 2" " " " " LUG UNION Loose wing nut type Brass: 4" - " DZR: 4" - " 90º CAP & TAIL 90º Degree loose hex nut type Brass: -760 DZR: -766 & -769 BSP(F) Hose ID 2" 2" " 8" " 4" -769 HOSE CONNECTOR NPT thread hose connectors may be available to order BSP Hose ID 2" 2" " 2" " 4" " 2" " 4" " " " " " 4" " 4" " 2" " 2" For more Brass Hose Connectors see page BSP PARALLEL THREAD ISO 228/ (BS 2779) BSP TAPER THREAD ISO 7/ (BS 2) SECTION

12 Bronze Pipe Fittings BRONZE PIPE FITTINGS NEW 90 ELBOW (FxF) s BSP Radius 2" " -782 " " " " " " " EQUAL TEE (FxFxF) s BSP 2" -78 4" -782 " -78 4" " -78 2" " -787 " " -789 REDUCING SOCKET (FxF) BSP 4" x 2" -72 " x 4" -722 " x 2" -72 4" x " " x " -72 2" x 4" " x 2" ELBOW (MxF) BSP Male Thread BSP Radius 2" " -782 " " " " " " " EQUAL SOCKET (FxF) s BSP 2" " " " " " " " FLANGED BACK NUT Heavy Duty Wide flanged BSP Flange Dia. 2" 42mm -70 4" 0mm -702 " 9mm -70 4" 6mm " 74mm -70 2" 90mm " 2mm -707 " 27mm " 6mm '' 224mm -704 FOR STANDARD WEIGHT BRONZE BACK NUTS SEE PAGE 6 4 ELBOW (FxF) BSP 2" " " " " " NEW UNION BSP 2" " " " " " '' '' PLUG BSP Taper Male Thread BSP 2" " " " " " EQUAL HEX NIPPLE BSP Male Thread BSP 2" " " " " " " " " ELBOW (MxF) BSP Taper Male Thread BSP 8" " " " " " -784 HEX BUSH BSP Parallel Female Thread BSP Taper Male Thread BSP BSP 8" x 4" " x 4" " x 8" " x 4" " x 8" " x 2" " x 8" " x 2" " x 4" " x 4" " x " " x 4" " x " " x 4" " x 4" " x 2" " x 2" " x 2 2" " x " -7829* *DZR Brass UNEQUAL HEX NIPPLE BSP Taper Male Thread BSP 2" 8" " 2" " 4" " " " 4" " 2" SECTION ON THIS PAGE ALL BSP THREADS ARE: BSP Parallel Female Thread: ISO 7/ (BS 2) BSP Male Thread Taper: ISO 7/ ( 8'' - 2'') BSP Male Thread Parallel: ISO 228/ (2 2'' - 4'')

13 Brass Hose Connectors BRASS HOSE CONNECTORS HOSE CONNECTOR BSP Taper Male Thread Straight with hex shoulder Brass: 8" - 8" DZR: 2" - 2 2" Some sizes are available with NPT Threads to special order BSP(T) Hose ID 8'' 8'' '' 6'' '' 4'' '' 6'' '' 8'' '' 2'' '' 8'' '' 6'' '' 4'' '' 6'' '' 8'' '' 2'' '' 8'' '' 4'' '' 6'' '' 8'' '' 2'' '' 8'' '' 4'' '' 8'' '' 2" " 8" " 4" " " " 8" " 2" " 8" " 4" " " " 2" " 4" " " " 4" -760 " 4 " -7604* " 2 " " 4" " " " 4" " 2" " " " 4" " 2" " 2" " 2" " 60mm " 2 2" " 2 2" * Short HOSE CONNECTOR Straight with hex shoulder Brass: 8" x 6-4" x 8" DZR: 4" x 4" - 2" x 2'' BSP Hose ID 8'' 6'' '' 8'' '' 4'' '' 6'' '' 8'' '' 2'' '' 4'' '' 6'' '' 8'' '' 2'' '' 8'' '' 4'' '' 6'' '' 8'' '' 2'' '' 8'' '' 4'' -76 4'' 8'' '' 4'' '' 7 8'' '' '' -762 '' 8'' '' 4'' '' '' -760 '' 4'' -76 '' 2'' -76 4'' '' '' 4'' '' 2 '' '' 4'' '' 2'' '' 2'' º HOSE CONNECTOR HOSE CONNECTOR BSP Parallel Male Thread Straight with hex shoulder Brass BSP Hose ID 8" 6mm " 8mm " 6mm " 0mm " 0mm " mm " mm " 4mm " 6mm " 20mm " 22mm " 6mm " 9mm " 22mm " 2mm " 28mm " 2mm " 28mm -720 " 2mm " 2mm " mm " 8mm " 4mm " 8mm " 40mm " 4mm " 0mm " 4mm " 0mm " mm " 60mm " 60mm " 6mm " 70mm " 76mm " 80mm " 90mm " 00mm Degree full bore Brass with hex shoulder BSP Parallel Male Thread BSP Hose ID 8" mm " 20mm " 2mm " 0mm " 40mm HOSE CONNECTOR Straight with hex shoulder Brass BSP Hose ID 4" 0mm " mm " mm " mm " mm " mm " 20mm " 20mm " 2mm " 2mm " 0mm " 2mm " mm " 40mm " 40mm " 4mm " 0mm " 0mm " 80mm SPECIAL HOSE CONNECTORS Brass Popular on engines BSP Parallel Thread Hose ID M4 x. 8" M4 x. 2" See pages 8 & 9 for our range of Hoses SECTION

14 Brass Pipe Fittings BRASS PIPE FITTINGS (CW67N) 90 SWEPT BEND (FxF) s BSP Radius 8" " " " " " " SWEPT BEND (MxF) BSP Taper Male Thread BSP Radius 8" " " " " " " ELBOW (FxF) s BSP 2" " " " " " ELBOW (MxF) BSP Taper Male Thread BSP 2" " " " " " ELBOW (FxF) s BSP Radius 8" " " " " " " " " " " " ELBOW (MxF) BSP Male Thread Taper: 8" - 2" Parallel: 2 2" - 4" BSP Radius 8" " " " " " " " " " " " CROSS (FEMALE) s BSP 8" " " " " " " REDUCING SOCKET (FxF) BSP 8" x 8" " x 4" " x 4" " x 8" " x 8" " x 2" " x 2" " x 4" " x 4" " x " " x " " x 4" " x 4" " x 2" Y CONNECTOR way Female Y Connector s BSP Part No 8" " -780 EQUAL SOCKET (FxF) BSP 8" " " " " " " " " " EQUAL TEE (FxFxF) BSP 8" " " " " " " " " " " " SECTION ON THIS PAGE ALL BSP THREADS ARE: Female Parallel: ISO 228/ (BS 2779) Male Taper: ISO 7/ (BS 2) Male Parallel: ISO 228/ (BS 2779)

15 Brass & DZR Pipe Fittings BRASS & DZR PIPE FITTINGS BRASS HEX BUSH BSP Male Thread Taper: up to 2" Parallel: over 2" Male x Female 4" x 8" " x 8" -77 8" x 4" " x 4" " x 8" " x 8" " x 4" " x 8" " x 2" -720 " x 8" -72 " x 2" " x 4" " x 4" " x " " x 4" -72 2" x " " x 4" " x 4" " x 2" " x 2" " x 2 2" " x " DZR NIPPLE BSP Parallel Threads Female Male 4" 8" " 8" " 4" " 8" " 4" " 8" " 8" " 2" " 8" " 2" -769 " 4" " 8" " 4" " " " 4" " " " 4" " " " 2" " BULKHEAD FITTING By use of parallel threaded nipple you can with flanged backnuts (page 6) make bulkhead fitting to suit most applications. EQUAL HEX NIPPLE BSP Male Thread Taper: up to & inc. 2" Parallel: 2 2" & over BSP Thread 8" 0mm " 2mm " 4mm " 6mm " 8mm " 20mm " 2mm " 24mm " 2mm " 26mm " 26mm " 28mm BRASS NIPPLE BSP Parallel External Thread BSP Length 4" 20mm " 2mm " 0mm -70 4" 0mm -702 " mm -70 4" 40mm " 4mm -70 2" 0mm -706 UNEQUAL HEX NIPPLE BSP Male Thread Taper: up to " BSP Parallel: 4" & over BSP 4" 8" " 4" " 8" " 2" " 4" " " " 4" " 2" " 2" " 2 2" " " s in Red = To Order Only DZR RUNNING NIPPLE BSP Parallel External Thread BSP Length 8" 00mm " 00mm " 00mm " 00mm " 0mm " 0mm -764 MANIFOLD FEMALE CONNECTIONS s Up to 2 spurs per size available BSP Spurs 4" 2 x 2" " x 2" " 2 x 2" " x 2" -789 " x 2" " 2 x 2" " x 2" " 4 x 2" " x 2" We offer over 6,000 quality marine and industrial products from all around the world. Visit our website: BARREL NIPPLE Extended brass tube BSP Taper Male Thread Length O.A.00mm BSP Thread* 2" mm -7 4" 6mm -72 " 8mm -7 4" 2mm -74 2" 2mm -7 2" 2mm -76 * Length of thread at each end THREADED TUBE BSP Parallel External Thread Length 000mm BSP Bore 8" mm " mm " 9mm " 2mm " 4mm " 40mm " 0mm ON THIS PAGE ALL BSP THREADS ARE: BSP Parallel Thread ISO 228/ (BS 2779) BSP Taper Thread ISO 7/ (BS 2) SECTION

16 Brass Pipe Fittings BRASS PIPE FITTINGS (CW67N) ELBOWED UNION (FxF) Female / Female Brass with tapered seat BSP " " " CAP Brass with hex head BSP 8" " " " " " " " " ELBOWED UNION (MxF) Male / Female Brass with tapered seat BSP 8" PLUG BSP Taper Male Thread Brass with square head BSP 8" " " " " " " " " " -746 UNION (FxF) Female / Female Shell moulded in Brass, with tapered internal connection BSP " " " FLANGED PLUG Brass with hex. on top BSP Parallel Male Thread BSP 4" " " UNION (MxF) Male / Female Shell moulded in Brass, with tapered internal connection BSP 8" " " " " " " FLANGED PLUG Nickel plated brass flanged plug c/w O ring BSP Parallel Male Thread BSP 8" " " " " WASHERS Sizes 8" - ": Machined Sizes 4" - 4": Cast Thickness: -6mm BSP OD ID 8" " " " " " " " " " HEX. LOCKNUTS Brass, BSP Parallel Thread L/Weight H/Weight BSP 4" " " " " " " " " " " BRASS FLANGED BACK NUTS BSP Flange Dia. 8" 0mm " mm -70 4" 40mm -702 " 0mm -70 4" 60mm " 66mm -70 STANDARD WEIGHT BRONZE BACK NUTS BSP Flange Dia. 2" 40mm " 46mm " 8mm " 68mm " 76mm " 90mm " 0mm " 22mm " 0mm FOR BRONZE HEAVY DUTY WIDE FLANGED BACK NUTS SEE PAGE 2 6 SECTION

17 Test Requirement: Titan Performance: Burst Pressure Test:.6 Mpa 2. to 7. Mpa Fire Test (about 70 C): 0 seconds 20 to 220 seconds Fuel Permeation: 4g (m2h).2 to.9 (m2h) Fuel Hose, Copper & Nylon Tubing FUEL HOSES TO: BS EN ISO 7840 TITAN FUEL HOSE ASSEMBLIES BS EN ISO 7840 CLASS A These hoses completely meet the EC Recreational Craft Directive, which is a rarity, being tested by B.S.I. and given an EC type examination certificate by Lloyds register in order to totally comply with the regulation unlike many marketed. In most cases TITAN greatly exceeded the test requirements. Specification: Special nitrile rubber inner metal braided and then sleeved to show specification. The ends have heavy copper extension spigots swaged in brass with hexagon collar for securing when fitting to compression fittings. 2" Size available to order. SPIGOT SIZE Length 4" 6" 8" 2" " " " " " MARINE FUEL HOSE COILS EN ISO 7840 A & A2 Black, fuel, (petrol & diesel oil) resistant NBR rubber tube Cover is abrasion, ozone, weather, heat & oil resistant Resistant to flame, abrasion, oil and sea conditions Temperature range: -ºC to +00ºC Type A2 is mandrell wound and also features twin steel wire helix reinforcement Hose Size Working Bend NOM ID OD Pressure Radius Weight 0m Coil Long Coil Type Inch mm mm PSI BAR mm kg/mtr A (00m) A (00m) A (00m) A (00m) A (00m) A (0m) A (0m) A (40m) A (40m) A (0m) A (0m) Available in cut metre lengths (premium price). Add in front of large coils i.e and state length required. The difference between Type A and Type A2 is the fuel permeation rate in a test environment. Type A is hose tested with a permeation rate of 4g/m sq per hour or less. Type A2 is hose tested with a permeation rate of 4g/m sq per hour up to & including 2g/m sq per hr. COPPER TUBING NYLON TUBING COPPER AND NYLON TUBING COPPER TUBING Annealed soft copper tubing in 0m or 0m coils Manufactured to BS EN 27-:200 Tube Wall Gauge Working s OD Thickness Pressure PSI 0m 0m 8".7mm ".7mm ".94mm ".94mm ".94mm ".94mm Tube OD Wall PSI 0m 0m 4mm 0.6mm 99-0 mm 0.8mm mm.0mm mm.0mm mm.0mm mm.0mm NYLON TUBING - 0m Flexible, natural colour Suitable for pneumatic, fuel and lubrication Working Temperature: -0ºC to +80ºC Sold in 0m coils *Working Pressures: values given are based on the short-term burst pressure of nylon at 20ºC using a safety factor of 4:. Tube Tube Pressure* OD ID PSI Bar 6".7" 40-02C 4".70" C 6".22" C 8".20" C 6mm 4mm C 8mm.mm 2-6C 0mm 7mm C OTHER SIZES TO ORDER ALTERNATIVE COLOURS & SIZES MAY BE AVAILABLE TO ORDER SECTION 7

18 Suction & Delivery and Clear PVC Hoses STANDARD SUCTION & DELIVERY HOSE - 0m HOSES Colour: Black. Temperature Range: - C to +60 C Description: Strong, flexible and smooth, plasticized PVC, shock, crush, abrasion and weather resistant. Light corrugated outside with white nylon spiral. Applications: For general purposes in agriculture, marine, general and building industries. Suitable for deck drains, pump outlets and low suction inlets. Conveyance of liquids, granules, dust and powder. Burst Bend ID Pressure Vacuum Radius Weight Inch mm Bar M.H 2 O mm gr/m -9002C 2'' C 8'' C 4'' C '' C 8'' C 4'' C 2'' C 2'' C 2 2'' C '' MEDIUM SUCTION & DELIVERY HOSE - 0m Colour: Green. Temperature Range: - C to +60 C Description: Strong, flexible and smooth plasticized PVC, shock and crush resistant. Light corrugated outside with shock resistant PVC spiral. Abrasion, ozone and weather resistant smooth natural and synthetic rubber cover. Applications: For all suction and pumping applications in agriculture, marine, light chemicals, general and building industries. Conveyance of water, sludge, slurries & waste matter. Suitable for engine, bilge and deck wash pumps. Burst Bend ID Pressure Vacuum Radius Weight Inch mm Bar M.H 2 O mm gr/m -9002C '' C 4'' C 2'' C 2'' C 2 2'' C '' CLEAR BRAIDED PVC HOSE - 0m Colour: Transparent Temperature Range: -20 C to +6 C Description: Transparent plasticized PVC hose reinforced with high tensile synthetic textile. Non-toxic, abrasion, ozone and weather resistant. Applications: Gardening, irrigation, and general water discharge and low pressure airlines. Made with FDA approved ingredients and is suitable for food applications. -900R-C -900B-C Working Burst Bend ID OD Pressure Pressure Radius Inch mm mm Bar Bar mm -9004C 4" C 6" C 8" C* 2" C 8" C* 4" C " C 4" C 2" C 2" " & 4" ID are available in red or blue. *To order add R or B to i.e. -900R-C or -900B-C CLEAR PVC HOSE - 0m Colour: Clear Temperature Range: -0 C to +60 C Description: Strong, very flexible and smooth transparent plasticized PVC Applications: For conveying liquids, air, light chemicals, oil, detergents and many other liquids including potable water. Also used as suds pipes and protection and decoration of metal tubes, wooden dowelling and yacht rigging. Under most conditions it is suitable for use with oils, greases and solvents. Made with FDA approved ingredients and is suitable for food applications. ID OD Inch mm mm -9020C 6" C 4" C 6" C 6" C 4" C 2" C 2" C 2" 9 ID OD Inch mm mm -9026C 8" C 4" C " 2-902C 4" C 2" SECTION

19 PVC, Sanitation & Ducting Hoses HOSES CLEAR NON-TOXIC STEEL SPIRAL PVC HOSE - 0m Colour: Clear. Temperature Range: - C to +60 C EEC Directive: 90/8 Description: Strong very flexible and smooth non-toxic, transparent plasticized PVC with shock resistant galvanised steel wire spiral. Abrasion and weather resistant, smooth outside. Applications: For suction and delivery of water, mineral water, fruit juices and liquids. Ideal for waterpump and watermaker installations. Burst Bend ID Pressure Vacuum Radius Weight Inch mm Bar M.H 2 O mm gr/m C 2'' C 8'' C 4'' C '' C 4'' C 2'' C 4'' C 2'' SANITATION HOSE SANITATION HOSE IS A SERVICEABLE ITEM AND SHOULD BE ACCESSIBLE TO FACILITATE REPLACEMENT. SANIFLEX PREMIUM RUBBER SANITATION HOSE - 0m or 40m Colour: White Temperature Range: - C to +70 C Description: Black, SBR rubber tube, reinforced with high tensile synthetic fabric. White, ozone, weather and abrasion resistant SBR rubber cover. Available in 0m and 40m Applications: Conveyance of effluent, odour free suction and discharge for sanitary installations in marine and domestic use with low odour permeability. Hose Size Working Burst Bend 0m 40m ID OD Pressure Pressure Radius Weight Length Length Inch mm mm Bar PSI Bar PSI mm gr/m 4'' '' '' SANIFLEX PREMIUM PVC SANITATION HOSE - 0m Colour: White Temp Range: -ºC to +60ºC Description: Strong, very flexible and smooth, white plasticized PVC, with shock resistant galvanised steel spiral wire. Applications: Suction and discharge for sanitary installation in marine and domestic use. Burst Bend ID Pressure Vacuum Radius Weight Inch mm Bar M.H 2 O mm gr/m C 4" C " C 2" DUCTING HOSE LIGHTWEIGHT PVC DUCTING HOSE - 0m Colour: Grey Temp Range: - 0 C to +60 C Description: Extremely light and flexible plasticized PVC with shock resistant PVC spiral. Chemical agents, abrasion and weather resistant, corrugated outside. Applications: Industrial ventilation and airflow systems, suction of duct, air, gases, powders, liquids etc. Bend ID Vacuum Radius Weight Inch mm M.H 2 O mm gr/m -90C 2 4" C 2 2" C " C 2" For Heating Products & Accessories - See our Section 9 Catalogue SECTION 9

20 JCS Hose Clips & Multi-Torque Kits Technical Specification Size A B C D E F Recommended mm mm mm mm mm mm Setting Torque Nm lb-in Material Specification: HI-GRIP: All parts - Mild Steel, Bright Zinc Plated & Passivated HI-GRIP STAINLESS: All parts BS04 - EN.40 HI-GRIP Band Edges Hi-Grip Band Edges HI-GRIP WORM DRIVE HOSE CLIPS HI-GRIP ZINC PLATED MILD STEEL High quality hose clips where the band threads are pressed in (rather than perforated) enhancing the thread strength and providing a smooth and snag-free band surface. Made from heavily zinc plated mild steel Tough construction Manufactured to BS*, has BSI Kitemark and NATO approved Typical hose clip with turned up edges All HI-GRIP hose clips have fully rounded edges to give the best possible protection to the hose. DISPLAY STANDS & ASSORTMENT BOXES Full details available on request. Description HI-GRIP Zinc plated hose clip display (60 clips) HI-GRIP Zinc plated hose clip assortment box ( clips) -880 HI-GRIP S/S hose clip display (60 clips) HI-GRIP S/S hose clip assortment box (76 clips) HI-TORQUE Marine hose clamp display * BS is recognised as one of the most stringent standards for hose clips worldwide HI-GRIP STAINLESS STEEL Hose clips are made entirely in 8/8 marine quality stainless steel and therefore are ideal for salt water and other highly corrosive environments. Lloyds Register Type Approval for marine, offshore and industrial use High quality and performance Industry standard for marine applications HI-GRIP FLEXIBLE SCREWDRIVER Specially made screwdriver will not slip off screwhead whilst turning. The flexible shaft enables easy fitting even in awkward places Size Old Size Dia.mm Dia. ins Zinc Plated S/Steel Unit Box of 0 6 M Box of Box of Box of 0 2 0X Box of 0 0 A Box of Box of 0 40 X Box of Box of 0 0 2A Box of Box of X Box of Box of 0 80 X Each Each 00 4X Each Each 40 6 & 6X Each Each Each JCS MULTI-TORQUE KITS JCS have coupled the strength of HI-TORQUE hose clamps with the convenience of being able to produce instant hose clamps to any desired diameter from a kit. MULTI-TORQUE kits are manufactured to the same high quality standards as HI-TORQUE clamps. Ideal for maintenance applications All parts are 00% stainless steel (8/8 marine quality - BS 04) Significantly stronger than other adjustable banding products. By cutting off the required length from banding roll and engaging one end into each housing on the MULTI-TORQUE connector a hose clamp is made and it is reusable. Description Multi-Torque S/S Band Connectors per Multi-Torque S/S Banding per 0m -88 Multi-Torque S/S Band Kit m SECTION

21 HI-TORQUE HEAVY DUTY S/S HOSE CLAMPS HI-TORQUE STAINLESS STEEL Specifically designed for tough wire-reinforced hoses and where an extra margin of safety and reliability is required. Hi-Torque clamps out perform nut and bolt type clamps due to: Higher sealing pressure due to more uniform tightening Offer a larger adjustment for each size No loose parts so quicker to fit and requires less space Unique Straight Line housing, ensures that every thread in the screw is fully engaged in the band Twice the strength of ordinary worm drive hose clips due to the high tensile banding and hardened rolled thread screw Sold singly Lloyds Register Type Approval for marine, offshore and industrial use. They are specifically approved for the critical application of sealing wet diesel exhaust hoses. Material Specification: All Parts: BS04 - EN.40 Tensile strength = 0 N/mm 2 approx (7 tons/in 2 ) Recommended Setting Torques: Nm (0 lb.in) Hi-Torque Band Edges All HI-TORQUE Stainless hose clips have fully rounded edges to give the best possible protection to the hose. Hi-Torque Band Edges 8/8 STAINLESS STEEL P CLIPS Marine quality Stainless Steel clips with a TPE rubber liner TPE rubber liner absorbs vibration, stops water seeping into the clamped area & prevents damage to pipe or cable Special strengthening rib keeps clips flush with the surface TPE liner is UV and ozone resistant Elongated upper hole to help line up the bolt when fitting Fixing nuts and bolts not supplied Packed in bags of 2 Dimensions in mm Dimensions in mm Typical hose clip with turned up edges JCS Hose Clips & P Clips Size Old Size Dia.mm Dia. ins & & & & HI-TORQUE Hose Clamp T Bar Screwdriver HI-TORQUE Hose Clamp Ratchet JCS P CLIPS FOR PIPES, CABLES & HOSES Material Specification: Stainless P Clip: BS04 - EN.40-8/8 S/S Liner: TPE rubber (black) - 6 IRHD hardness Service Temp -0ºC to + 0ºC CARDED P CLIPS per card ( - 2mm) add suffix /P to 2 per card (2-60mm) add suffix /2P to Hose Clips Sold as Each M6 Dimensions Int. Dia. A B C mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 40mm mm mm mm mm mm M6 D E F G mm M0 Dimensions Int. Dia. A B C mm 6mm mm mm 0mm mm mm mm mm mm 22mm mm mm mm 2mm mm 6mm mm mm mm mm mm 60mm M0 D E F G mm SECTION 2

22 Jubilee Heavy Duty Bolt Clamps JUBILEE HEAVY DUTY BOLT CLAMPS Min-Max Screw Band Band Max. Rec. Screw Dia. mm DIN 9 Width Thickness Tightening Head A/F Zinc S/Steel (A) mm (B) mm (C) Torque Nm* mm (D) Plated Some alternative sizes To Order only. JUBILEE SUPERCLAMPS Used for demanding situations, the Jubilee Superclamp is easily adjusted by a single nut and bolt. Available in Zinc plated mild steel (yellow passivated) and 6 (A4) Stainless steel M M M M * Maximum recommended tightening torque (Nm) figures are based on Zinc Plated Mild Steel range. KWICK-KAM COUPLINGS KWICK-KAM COUPLINGS Polypropylene - Glass-coupled Polypropylene A quick, simple and safe method of extending hoses Ideal for pump out machines BSP parallel flat seal undercut Handles & pins are 6 Stainless Steel Working pressure up to 8. Bar (2PSI) Standard seal EPDM/Polypropylene Alloy Interchangeable with other couplings of similar design to MIL-C Alternative sizes available to order from 4" to 4" 4", ", 2" POLY COUPLERS 4", ", 2" POLY ADAPTERS No. Description 4" P/No. " P/No. 2" P/No. Poly Coupler x Hose Poly Coupler x BSPM Poly Coupler x BSPF Poly Coupler x Dust Cap -767 No. Description 4" P/No. " P/No. 2" P/No. Poly Adapter x Hose Poly Adapter x BSPM Poly Adapter x BSPF Poly Adapter x Dust Plug SECTION

23 Compression Fittings BRITISH MADE COMPRESSION PIPE FITTINGS We normally stock either WADE fittings or an alternative British made supplier depending on availability. WADE Fittings have been manufactured and distributed for 0 years. So successful has the product been, that Wade Brass has become the generic term for Brass Compression Fittings for engineering purposes. WADE Brass, which is synonymous with durability and reliability, provides a comprehensive range of fittings for both imperial and metric OD tube sizes. These are available in a full range of connecting threads. Through the adoption of a standard body, a variety of tubes of similar and dissimilar material can be connected. WADE Fittings can be found in general use throughout the following industries: hydraulic, pneumatic, automotive, locomotive, LPG, oil and gas, power generation, air conditioning, heating and ventilation. All our compression fittings are manufactured to BS 20 Part 2 and from material to all of the following standards: Bar Parts: BS EN 264, CW609N Stampings: BS EN 264, CW67N Castings: BS EN 982, CC49K Copper Rings: BS EN 2449, CW024A All compression fittings are complete with nuts and annealed copper rings as standard, for use with copper tube. METRIC/IMPERIAL IDENTIFICATION METRIC NUT IMPERIAL NUT NPT / BSPT IDENTIFICATION NPT THREAD CHAMFERED FACE BSPT THREAD FLAT FACE WORKING PRESSURES The recommended maximum working pressures conform to BS 20 part for temperatures up to 6ºC under vibration free conditions. Please ensure the tube to be used is suitable for the pressures required. IMPERIAL PRESSURE PSI OD Inches Hydraulic Pneumatic 8-6,000,00 8 2,000, , , METRIC PRESSURE BAR OD mm Hydraulic Pneumatic COMPRESSION RINGS - BRASS Sold per 0 Size 8" -90 6" -90 4" " -90 8" " " " -909 " COUPLING NUTS Sold Singly Tube OD BSP 8" 8" -09 6" 8" " 4" " 4" " 8" -00 2" 2" -0 COMPRESSION RINGS - COPPER Sold per 0 Size 8" " " " " " " COMPRESSION FERRULES Sold per 0 To suit medium size flexible nylon tubing Tube OD Tube ID 6".7mm ".70mm -90 6".22mm ".20mm -90 Size 4mm mm mm mm mm mm Tube OD BSP 6mm 4" mm 4" mm 8" Size 4mm mm mm mm mm mm -907 mm Tube OD Tube ID 6mm 4.0mm mm.mm mm 7.0mm -904 FOR PACKAGED ASSORTED COMPRESSION RINGS SEE PAGES 2 - SECTION 2

24 Compression Fittings COMPRESSION FITTINGS STRAIGHT COUPLINGS (EQUAL & REDUCING) Tube OD x Tube OD 8" x 8" " x 8" " x 6" " x 8" " x 6" " x 4" " x 6" " x 4" -20 6" x 6" " x 6" -22 8" x 4" -20 8" x 6" " x 8" -20 2" x 4" " x 6" " x 8" " x 2" " x 2" -29 8" x 8" Tube OD x Tube OD 4mm x 4mm -20 mm x mm mm x 4mm -20 6mm x 6mm mm x 8mm mm x 6mm mm x 8mm mm x 0mm mm x 8mm mm x 0mm mm x 2mm mm x mm For Imperial to Metric Straight Couplings see page 26 BSP LOCK NUTS BSP 8" " " " -974 MALE STUD COUPLINGS BSP PARALLEL Tube OD x BSP Male 8" x 8" -00 6" x 8" " x 4" " x 8" -06 4" x 8" " x 4" " x 8" " x 2" -00 6" x 8" -0 6" x 4" -20 6" x 8" -0 6" x 2" -40 8" x 4" -0 8" x 8" -60 8" x 2" -70 2" x 4" -80 2" x 8" -90 2" x 2" " x 2" -20 4" x 4" -220 " x " -20 Tube OD x BSP Male 4mm x 8" -270 mm x 4" mm x 4" mm x 8" mm x 8" mm x 4" mm x 8" mm x 2" mm x 4" mm x 8" mm x 2" mm x 4" mm x 8" mm x 2" mm x 2" BLANK NUTS BSP 8" " -97 8" " -97 MALE STUD COUPLINGS BSP TAPER 8" x 8" " x 4" -40 6" x 8" " x 4" " x 8" " x 4" " x 8" " x 2" " x 8" " x 8" *-409 6" x 4" " x 4" *-40 6" x 8" -40 6" x 2" -4 8" x 8" -47 8" x 4" " x 8" -40 8" x 2" " x 4" -40 2" x 8" " x 2" " x 2" " x 4" -490 SCREWED PLUG TAPER THREAD BSP 8" " " " -972 FEMALE STUD COUPLINGS BSP PARALLEL Tube OD x BSP Taper Tube OD x BSP Female Tube OD x BSP Taper 4mm x 8" mm x 4" -222 mm x 4" mm x 8" mm x 4" mm x 8" mm x 4" mm x 8" mm x 4" mm x 8" mm x 2" mm x 4" -20 2mm x 8" mm x 2" -20 mm x 8" -24 mm x 2" " x 8" " x 4" " x 8" " x 4" " x 8" " x 8" " x 4" " x 8" " x 2" " x 8" " x 4" " x 8" -70 6" x 2" " x 4" " x 8" " x 2" " x 8" " x 2" " x 4" -70 " x " -720 Tube OD x BSP Female 4mm x 4" mm x 4" mm x 8" mm x 4" mm x 8" mm x 4" mm x 8" mm x 4" mm x 8" mm x 2" mm x 8" mm x 2" mm x 2" FLANGED MALE PLUGS PARALLEL BSP 8" " -97 8" " -97 4" -974 " SECTION * FITTED WITH 6" OD FERRULE FOR NYLON TUBE

25 COMPRESSION FITTINGS Compression Fittings EQUAL ELBOW COUPLINGS Tube OD x Tube OD 8" x 8" " x 6" " x 4" " x 4" " x 6" " x 8" " x 2" -80 Tube OD x Tube OD 4mm x 4mm mm x 6mm mm x 8mm mm x 0mm mm x 2mm mm x mm FEMALE STUD COUPLING - BSPT Tube BSPT 4" 4" " 8" -74 6" 8" -74 6" 4" -70 6" 8" -7 8" 4" " 8" " 2" -780 MALE STUD ELBOW BSP TAPER Tube OD x BSP Male 8" x 8" " x 8" -80 6" x 4" -8 4" x 8" " x 4" -80 4" x 8" -8 6" x 8" " x 4" -80 6" x 8" -8 6" x 2" -86 8" x 4" " x 8" " x 2" " x 8" " x 2" FEMALE PRESSURE GAUGE CONNECTORS BSP PARALLEL Tube BSP 4" 8" " 8" " 2" Tube BSP 6mm 4" mm 2" FEMALE STUD ELBOW BSP PARALLEL Tube OD x BSP Female 6" x 8" -80 4" x 4" " x 8" -86 6" x 4" " x 8" -87 8" x 4" " x 8" " x 2" -89 2" x 8" " x 2" Tube OD x BSP Female 8mm x 8" mm x 4" mm x 4" mm x 8" mm x 8" mm x 2" Tube OD x BSP Male mm x 8" mm x 4" mm x 4" mm x 4" mm x 8" mm x 2" mm x 4" mm x 8" mm x 2" mm x 2" -270 SINGLE BANJO COUPLING With steel bolt Supplied with copper washers as standard Tube Bolt 8mm 4" mm 8" -44 2mm 8" FEMALE TO FEMALE ADAPTORS BSP PARALLEL BSP BSP 8" 8" " 8" " 4" " 8" " 4" " 8" " 4" " 8" " 2" BRASS PLUG COCK Ideal for applications requiring a quick and positive shut-off where easily visible open & shut positions are needed Maximum working pressure 0psi/2bar STEM NOZZLE ADAPTOR SPECIALS: Hose ID 6" " Description -420 MALE STUD COUPLING M4 x. 4" TUBE -42 MALE STUD COUPLING M4 x. 6" TUBE -422 MALE STUD COUPLING M4 x. 8" TUBE TUBE X BSP MALE PARALLEL STUD Foot mounted for tube. Tube OD BSP 4" 4" TUBE X TUBE Tube OD Tube OD 4" 4" " 6" " 8" Tube OD Tube OD 8mm 8mm We also stock NPT Threaded versions of these fittings: Male Stud Couplings Female Stud Couplings Male Stud Elbows Screwed Plugs SECTION 2

26 Compression Fittings COMPRESSION FITTINGS EQUAL TEE COUPLING Tube OD 8" x 8" x 8" " x 6" x 6" " x 4" x 4" " x 6" x 6" " x 8" x 8" " x 2" x 2" " x 8" x 8" " x 4" x 4" UNEQUAL BRANCH TEE Tube Tube Branch 4" 4" 6" " 6" 6" " 6" 4" " 6" 8" " 8" 4" " 8" 6" " 8" 2" " 2" 8" -898 FEMALE BRANCH TEE BSP PARALLEL Tube Tube Stud OD OD Stud 4" 4" 4" -87 6" 6" 4" " 8" 4" MALE BRANCH TEE - BSP TAPER Tube Tube T. OD OD Stud 4" 4" 4" " 6" 8" " 6" 4" " 8" 4" " 8" 8" " 2" 2" Tube OD (mm) 4 x 4 x x x x 6 x x 8 x x 0 x x 2 x x x BULKHEAD COUPLINGS Tube Max. B/Head OD Thickness 8" 4" " 8" -70 4" 6" -7 4" 8" " 8" -72 6" 6" " 8" -70 6" 8" -7 8" 8" " 4" -74 2" 2" -70 2" 4" -7 4" 2" -760 Tube Max. B/Head OD Thickness 4mm 8" mm 8" mm 8" mm 8" mm 8" mm 8" mm 8" EQUAL ENDED CROSS Tube OD 6" " -77 IMPERIAL TO METRIC STRAIGHT COUPLING Tube OD Tube OD 4" 6mm " 0mm " mm BULKHEAD NOZZLE For rubber hose. Bulkhead thickness 4" max Tube OD Hose ID 4" 8" -62 6" 8" " 8" -627 UNEQUAL TEE Tube Tube Tube 4" 6" 6" -90 8" 6" 6" -909 UNEQUAL RUN TEE Tube Tube Tube 2" 6" 6" -90 2" 8" 8" -9 STOP END Tube OD 6" -90 4" " -90 8" " -90 6mm mm mm mm Tube Tube T. OD OD Stud 0mm 0mm 4" TEST POINT UNION Tube OD 6" " mm mm TEST POINT ELBOW Tube OD 4" " " " mm mm TEST POINT NIPPLE Tube OD 8" BSPM SECTION SOME FITTINGS ARE AVAILABLE WITH NPT & METRIC THREAD

27 COMPRESSION FITTINGS Compression Fittings HOSE CONNECTOR Fulham Nozzle to BSP(M) HOSE CONNECTOR Fulham Nozzle to BSP(T) BSP(M) Hose ID BSP(T) Hose ID BSP(F) Hose ID Tube OD Hose ID 8" 8" or 0mm " 8" or 0mm " 8" or 0mm " 8" or 0mm " 8" or 0mm " 8" or 0mm " 8" or 0mm -629 HOSE NOZZLE ADAPTOR With swivel nut for hose Parallel thread 8" 8" or 0mm " 8" or 0mm " 8" or 0mm -626 HOSE CONNECTOR Fulham Nozzle to BSP(F) BSP Hose ID 4" 4" " 6" " 8" " 2" -622 HOSE CONNECTOR Fulham Nozzle to Tube OD 4" 8" or 0mm " 8" or 0mm " 8" or 0mm STRAIGHT COUPLING Copper x copper mm x mm mm x 22mm mm x 28mm mm x mm mm x 42mm mm x 4mm -404 PRESTEX COMPRESSION FITTINGS (TYPE A) Manufactured to EN 24 (formerly BS864/2), Prestex Type A compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone onto the tube without the application of heat. The range is designed for use with copper tube to BS EN 07: 996 (formerly BS287: Part ), BS287: Part 2, or stainless steel tube to BS427: 994. We normally stock the Bronze or DZR Brass Range. Where a is followed by the letter B this indicates the material is Brass i.e. -24B. STRAIGHT COUPLING Copper x female iron mm x 2" BSP -4 22mm x 4" BSP mm x " BSP mm x " BSP -428 mm x 4" BSP -4 42mm x 2" BSP mm x 2" BSP -44 Medium Service Temp Maximum Working Pressure up to ºC BAR PSI Water or light mineral oils to 4mm sizes Compressed air Non-shock to 28mm sizes only Saturated Steam 20 4 LPG & natural gas 0 8 to 28mm sizes only STRAIGHT COUPLING Copper x male iron mm x 2" BSP mm x 4" BSP mm x " BSP mm x 4" BSP mm x 2" BSP mm x 2" BSP -424 BENT SWIVEL TAP ADAPTER Copper x union nut mm x 2" BSP -4B 22mm x 4" BSP -422B BENT COUPLING Copper x copper mm mm mm mm mm -444 BENT COUPLING Copper x male iron mm x 2" BSP -4 22mm x 4" BSP -422 mm x 4" BSP -4 42mm x 2" BSP mm x 2" BSP -44 TEE WITH BRACKET Copper x female branch mm x 2" BSP -400 TEE BRANCH REDUCED All ends for copper 22 (2) x mm -22 BENT COUPLING Copper x female iron mm x 2" BSP mm x 4" BSP mm x 4" BSP mm x 2" BSP mm x 2" BSP -464 BENT COUPLING Copper x female iron 8mm ( 2") screw with backnut 22mm x 4" -4722B 28mm x " NOTE: Jointing compounds or sealants are not necessary with Prestex fittings; the use of these materials could impair the efficiency of the joint and may contravene local water regulations. SECTION 27

28 Gas Systems HIGH LEVEL AIR VENT FROM OUTSIDE 6 Typical LPG Installation (Propane or Butane) 9 GAS INSTALLATION INFORMATION ALL PRODUCTS SHOULD BE INSTALLED BY QUALIFIED AND COMPETENT PERSONS IN ACCORDANCE WITH THE MANUFACTURERS INSTRUCTIONS * See Below ** 9 2 GAS DRAIN TO OUTSIDE. Gas Bottles 2. Double Bottle Auto Change Over Kit. Alde Gas Leak Detector (Bubble Type) 4. Copper Tubing. Gas Locker Bulkhead Fitting 6. Pipe Clips (spaced at least 00mm intervals for rigid metal piping and within 0mm of a joint) 7. Plastic Sleeve or Grommet for bulkhead 8. Auto Cut Off Valve (**required if MCA approved) 9. Compression Fitting 0. Test Point Fitting (Tee or Elbow) 4. Manual Isolation Tap 2. Flexible Gas Hose to BS 22/2. Compression Coupling 4. Appliance Fitted with FFD. Gas Drain 6. Air Vent (High level should be above the high pressure components) 0 2 For high capacity systems it may be necessary to include a loop for testing the system only. The operation valve MUST be opened once a test has been completed using the bubble tester. Bubble testers MUST be situated in a gas locker. From gas regulator 2 To cabin appliances BP/CALOR GAS BOTTLE SECURING KIT Suitable for: Calor bottles - 6kg & kg Propane or 7kg & kg Butane. BP Gaslight - kg & 0kg bottles. Meets the requirements of Boat Safety Scheme.. Unequal Branch Tee 2. Mini Gas Ball Valve. Alde Gas Leak Detector (Bubble Type) Kit includes: Plastic floor and bulkhead mount brackets and adjustable retention strap. -904P WARNING: Any work in gas installation should only be carried out by suitably qualified and competent persons. Attention is drawn to the Gas Safety (Installation and Use) Regulations 998 No. 24 (as amended) which require the installation of appropriate appliances, regular maintenance and testing of appliances, concerning those boats in scope. PD 482 part 200 refers to installation of LPG appliance in boats, yachts and other vessels. AQUAFAX UNDERTAKES TO SUPPLY GAS APPLIANCES OR FITTINGS ON THE ASSUMPTION THAT THE INSTALLER IS QUALIFIED AND COMPETENT. 28 SECTION

29 Gas Systems SMALL SINGLE BOTTLE PROPANE SYSTEMS SINGLE BOTTLE SYSTEM REGULATOR -908 x " or x " W20 PIGTAILS + + WALL BLOCK -92 REGULATOR -909 For complete range of Gas Regulators & Changeover Kits see pages 0 & DOUBLE BOTTLE SYSTEM x " or x " W20 PIGTAILS + + WALL BLOCK -920 REGULATOR -909 DOUBLE BOTTLE MANUAL CHANGEOVER MANUAL CHANGEOVER KIT -90 (without safety regulator) or -907 (with safety regulator) DOUBLE BOTTLE AUTO CHANGEOVER AUTO CHANGEOVER KIT (with OPSO) -906 (Budget) OPTIONAL 4 CYLINDER UPGRADE KIT 4 Bottle Installation SMALL SINGLE BOTTLE BUTANE SYSTEMS LARGE SINGLE BOTTLE CLIP ON REGULATOR REGULATOR -908 REGULATOR DOUBLE BOTTLE MANUAL CHANGEOVER MANUAL CHANGEOVER KIT -908 CAMPINGAZ OR USE See page 4 REGULATOR ADAPTOR -909 REGULATOR For spare gas pigtails see page 2 SECTION 29

30 Gas Regulators GAS REGULATORS (ALL TO BS 06) EN EN EN EN949 & 2864/D EN EN78 CONNECTIONS INLET PRESSURE OPERATING CAPACITY Btu/hr Gas Inlet Outlet max (bar) min mbar kg/hr kw/hr Propane 0P Pol 0 LP Nozzle (8mm) , Butane 28B Union 09 Butane Nut LP Nozzle (8mm) , Propane 7P Pol 0 LP Nozzle (8mm) , Propane 7P POL 0 /8" BSPF , LPG M20 x. 0mm Compression , Butane 28B Union 09 Butane Nut 8" BSPF , Butane 28B 20mm Clip-on LP Nozzle (8mm) , Butane 28B 2mm Clip-on LP Nozzle (8mm) , Campingaz M6 x. LP Nozzle (8mm) , Propane POLM 8 LH BS FEM Re ,000 AUTOMATIC CUT OFF VALVE For use with either Propane or Butane Quick acting quarter turn shut off Must be placed in the gas line between the regulator and the appliance Detects both loss of pressure or excess flow Cuts off gas supply to the appliance automatically and can only be reset manually A cut off valve of this type is suitable to comply with MCA marine guidance note for use on fishing vessels MGN2(F). CONNECTIONS INLET PRESSURE OPERATING CAPACITY Btu/hr Gas Inlet Outlet max (bar) min mbar kg/hr kw/hr -902 Propane or Butane 8" BSPF 8" BSPF ,000 0 SECTION AQUAFAX UNDERTAKES TO SUPPLY GAS APPLIANCES OR FITTINGS ON THE ASSUMPTION THAT THE INSTALLER IS QUALIFIED AND COMPETENT.

31 CHANGEOVER KITS Changeover Kits Automatic Changeover Regulators ensure continuous gas supply to the customer. When the pressure in the supply cylinder falls, the changeover regulator switches automatically to the reserve cylinder. The indicator arrow turns red when the system has changed over and points to the empty cylinder. The indicator turns white when turned towards the new service cylinder. OPSO = Over pressure shut off - i.e. in excess of 7mbar. PROPANE AUTOMATIC CHANGEOVER KIT WITH OPSO* Kit comprises of: One automatic changeover regulator Two 0cm (20") W20 pigtails with high pressure black hose to BS 22: Type 2 POL connectors incorporating excess flow & non-return valves One 2" F x F shut off valve WITH OPSO Capacity: 4.2kg (200,000 Btu/per hour) Inlet: POL Max. Inlet Pressure: 20 bar (294 p.s.i) Outlet: 2" BSP Female Outlet Pressure: 7 mbar (4.8"wg) PROPANE AUTOMATIC CHANGE OVER KIT Kit comprises of: One 924S regulator One automatic change over valve One Isolation valve Two 0cm (20") W20 pigtails with high pressure black hose to BS22: Type 2 POL connectors incorporating excess flow & non return valves 4 Cylinder Upgrade Kit: (See page 2) 4 Cylinder Upgrade Kit: (See page 2) BUDGET VERSION Capacity: 6kg per hour Inlet: POL Max Inlet Pressure: 20 bar Outlet: 8" BSP Female Operating Pressure: 7 mbar -906 PROPANE MANUAL CHANGEOVER KIT Kit comprises of: One regulator One manual changeover valve One thread adaptor Two 0cm (20") W20 pigtails with high pressure black hose to BS 22 : Type 2 POL connectors incorporating excess flow and non-return valves Capacity: 4kg ( Btu/per hour) Inlet: POL Max. Inlet Pressure: bar (60 p.s.i) Outlet: 8" BSP Female Outlet Pressure: 7 mbar (4.8 wg) Cylinder Upgrade Kit: (See page 2) BUTANE MANUAL CHANGE OVER KIT Kit comprises of: One 74 regulator One manual changeover valve One threaded adaptor Two 0cm (20") W20 pigtails with high pressure black hose to BS22: Type 2 Butane connectors incorporating excess flow & non return valves Capacity:.2kg per hour Inlet: Union 09 Max Inlet Pressure: 6 bar Outlet: 8" BSP Female Operating Pressure: 28 mbar -908 PROPANE MANUAL CHANGEOVER KIT WITH SAFETY REGULATOR The Propane Gold 776P Safety Plus, single stage manual changeover regulator has enhanced safety regulation and safety features suitable for modern high capacity gas appliances. Features safety relief valve protecting low pressure side of the gas system. kg/h (69kW) capacity at 7mbar and 2" BSPF low pressure outlet. Kit includes 2 x propane 20" flexible pigtails, regulator, manual changeover valve, bulkhead mounting bracket and a 2" BSP low pressure main gas isolation valve Capacity: kg per hour Inlet: POL Max Inlet Pressure: 20 bar Outlet: 2" BSP Female Operating Pressure: 7 mbar CYLINDER UPGRADE KIT 4 Bottle Installation See page 2 for details. * OPSO = OVER PRESSURE SHUT OFF SECTION

32 Gas Equipment A B GAS HOSES & EQUIPMENT PIGTAIL GAS HOSES TO BS 22 (TYPE 2) For use between gas bottle & regulator but not to exceed 7. Bar Supplied complete with excess flow valves (EFV) & non-return valves (NRV) End End 2 Length N2 4" BSP Female compression Butane Nut 0cm (20") N2 4" BSP Female compression Propane POL 0cm (20") -906 N2 4" BSP Female compression Butane Nut 7cm (0") N2 4" BSP Female compression Propane POL 7cm (0") -906 W20 Butane Nut 0cm (20") W20 Propane POL 0cm (20") -922 W20 Butane Nut 7cm (0") W20 Propane POL 7cm (0") -922 PROPANE WALL BLOCKS Brass body on steel mounting bracket. Double units have non-return valve. Photo Description Inlet Outlet -920 A Double Wall Block Propane W20 POL Connection -92 B Single Wall Block Propane W20 POL Connection MINI GAS/DIESEL BALL VALVES COMPRESSION x COMPRESSION OR 8MM NOZZLE A range of mini gas ball valves with integral foot mount. These valves are designed for pipe to pipe applications or hose to copper pipe with an integral foot mount for a secure hold without additional pipe supports. All come complete with nuts and brass olives. For use with propane, butane, natural gas and diesel oil. 2 Technical Specifications Body material: forged brass nickel plated Ball material: brass nickel/chrome plated Body seal: Teflon PTFE Shaft seal: nitrile 2 x NBR (max. temp + 90ºC) Operating temperature: -20ºC to +60ºC Max. operating pressure: 20 bar Anti-blow out stem with /4 turn positive shut-off Full bore operation - minimum pressure drop 00% factory tested Conforms to European Standard for Gas Valves - EN :99 Also suitable for diesel 4 CYLINDER UPGRADE KIT Kit contains: 2 x 0" W20 Pigtails 2 x W20 T Pieces For use with manual, automatic & high pressure changeovers Propane only Enable upgrade from 2 to 4 cylinders SECTION Compression x Compression x Hose ID 4" 4" " 6" -90 8" 8" mm -922 NOTE: IF INSTALLING IN A GAS SYSTEM USING COPPER PIPE THE BRASS OLIVES MUST BE EXCHANGED FOR COPPER OLIVES TO COMPLY WITH EN ISO 029:2000 (6.2.4) Description " pack of 0 Copper compression olives " pack of 0 Copper compression olives " pack of 0 Copper compression olives GAS SPANNERS LIGHT WEIGHT SPANNER For Butane and Propane Nuts Length: 60mm HEAVY WEIGHT SPANNER For Butane and Propane Nuts Length: 20mm -904 BRASS GAS SPANNER Solid Polished Brass 200mm overall length AQUAFAX UNDERTAKES TO SUPPLY GAS APPLIANCES OR FITTINGS ON THE ASSUMPTION THAT THE INSTALLER IS QUALIFIED AND COMPETENT.

33 Gas Equipment GAS HOSES TO BS 22 (TYPE 2) RCD APPROVED ORANGE BRAIDED GAS HOSE ASSEMBLIES Made in high pressure orange hose (not to exceed 7. Bar) and fitted with copper extension spigots held by swaged S/S ferrules. RCD and BSS approved up to m. S/S metal braided outer for use in installations where hose is subject to movement abrasion. Longer sizes available to order (may be subject to minimum order quantity). 4" SPIGOT SIZE 6" Length Orange Braided Orange Braided Orange Braided Orange Braided 8" B B B 24" B B B 0" -840B B B -870B 6" B B B -876B 42" -8442B -842B -8642B 8" 2" ORANGE GAS HOSE IN COILS BS22 (TYPE 2) Bore 0m Coil 0m Coil Carded 8mm 6" /KP* 0mm 8" /KP* *Contains m & 2 Clips COMMERCIAL GRADE PTFE TAPE Sold per 0 Suitable for metal, and plastic thread sealing Resistant to water, air, steam and most chemicals Complies with BS 7786 requirements Temp Range: -240 C to +260 C Width Length Thickness 2mm 2m.07mm NOT FOR USE ON LPG OR NATURAL GAS FITTINGS CLESSETITE LPG THREAD SEALANT Handy 0ml bottle with applicator Suitable for LPG Gas, natural gas and potable water Metal thread sealant for use with copper, steel, brass, bronze, aluminium & alloys Certified to EN7 part and meets pressure requirements for part 2 (Class A & B) Individual or retail pack of 0 bottles available Part No: -907/ Single bottle Part No: -907 Box of 0 PTFE GAS THREAD SEALING TAPE A premier grade pure PTFE tape for thread sealing particularly recommended for natural gas and LPG Resistant to most chemicals, acids, alkalis etc. Temperature range -240ºC to +260ºC Complies with BS 6974 and BS EN Sold Singly Width Length Thickness 2mm m.20mm For Gas Safety Accessories See Next Page... For Copper Tubing See Page 7 SECTION

34 Gas Leak & Carbon Monoxide Detection GAS SAFETY FIREBLITZ FIREHAWK BATTERY OPERATED CARBON MONOXIDE ALARM (CO7 Series) The FireHawk CO7 range battery operated Carbon Monoxide alarm is ideal for the home and travelling on holiday. It s compact size takes up little room in the baggage but gives you invaluable protection from faulty heating and cooking appliances wherever you are. Sealed-in long life lithium battery 7 Year Sensor: top quality Figaro electro-chemical sensor ensures accuracy and longevity Automatic sensor test End of life indicator: short beeps every minute indicate end of sensor life LCD display (CO7BD only). Displays CO concentration in parts per million (ppm), peak CO level for preceding 2 hours and Carboxyhaemoglobin (COHb) percentage measurement CO alarm silence: silences alarm for up to 0 mins Silence low battery warning chirp for up to 0 hours. Ideal for night-time use LED indicators for power, alarm and fault condition Versatile mounting system allows alarm to be fixed to a surface or to be used free-standing NEW BUBBLE GAS LEAK DETECTOR This leak detector is designed to be connected close to the outlet side of the gas regulator. It then provides an instant visible check for leaks. Bubbles in the sightings chamber indicate a leak downstream of the bubble tester. Supplied complete with fluid. It may be used in boats, caravans and other applications. The Boat Safety Scheme states that an approved bubble tester is highly recommended. The bubble tester is approved by BSS. N mm N mm Technical Specification: Dimensions (HxWxD): Max. working pressure: Capacity: Pipe connections: CAMPINGAZ ADAPTER Butane Regulator Adaptor Fits Campingaz 90, 904, 907 cylinders -909 Spare Fluid: N-2900 (Fluid) 90 x 60 x 0mm 2 bar (29.4psi) 2kW 8mm/0mm compression inlet & outlet GAS LEAK DETECTOR FLUID SPRAY Solution comes in a durable plastic spray 00ml bottle SMOKE ALARMS OPTICAL BATTERY OPERATED SMOKE ALARM (FHB Series) All FireHawk Photoelectric type smoke alarms are approved to EN , the most recent and rigorous European Smoke Alarm Standard. The Photoelectric sensing chamber is particularly sensitive to slow smouldering fires typically originating in living rooms, bedrooms and hallways whilst being highly resistant to nuisance alarms. Battery Operated: year 9 volt PP type battery Approved to EN4604:200, smoke alarm devices Low Battery Warning: Alarm gives one beep every 40 seconds Red LED flashes approximately every 40 seconds confirming unit is receiving power and ready to detect fire conditions (Quiescent Mode) Loud 8 Decibel Piezo Electric Alarm: automatically resets when hazardous condition has passed and chamber is clear. Test Button: Tests for sensitivity, circuitry, battery and alarm sounder. Year Guarantee: (Except Battery) NEW LONG LIFE BATTERY OPERATED SMOKE ALARM (FHB0 Series) The new and exciting range of optical smoke alarms comes with our unique X-Profile photoelectric chamber, controlled by bespoke software and featuring TSE-Technology (Thermal Stability Enhancement), specifically designed to reduce nuisance alarms while maximising the detection of smoke and fire. Auto Switch Mounting Base Plate: power automatically switched on when alarm is installed onto mounting plate and automatically switched off when alarm removed. Unique X-Profile detection chamber, protected by insect screen & controlled by bespoke software. TSE-Technology (Thermal Stability Enhancement) provides stability across a range of environmental conditions, reducing nuisance alarms whilst enhancing detection. Alarm Silence Button: ideal in non-emergency situations (nuisance alarms). Silence low battery warning chirp function for up to 0 hours. Maintains continuous protection during sleeping hours. End of alarm life indication. LPCB approved to EN 4604: 200 NEW SECTION

35 MISCELLANEOUS Washers, Saddle Clamps, O Rings & Tube Clips COPPER WASHERS Sold per 0 For BSP Male Thread Size (Approx.) BSPM BSPF A B C '' " 8'' " 2'' " 4' " 7 8'' " '' " " 8 2. O CLIPS Sold per 0 or per 0 Mild steel zinc plated Tube Adjustment OD mm (0) (0) 6" Q 4" Q 6" Q 8" Q 7 6" Q 2" Q 9 6" Q 8" Q 6" Q 4" Q SADDLE CLAMPS Sold per 0 Copper pressings D L approx Tube OD L D Inch mm mm mm " " " " " " 9 NYLORACK TUBE CLIPS Sold per 0 Tube OD Way 4" " " " " NITRILE WASHERS Each For BSP(F) joints as inside female threaded hose connectors Thickness approx. mm Suitable for water or oil BSP OD ID mm mm 2" " " " " " NITRILE WASHERS Each For fitting over male BSP threads as on tank fittings, male threaded hose connections etc. Thickness approx. mm Suitable for water or oil BSP OD ID mm mm 8" " " " " " " " " WASHERS (FIBRE) Sold per 0 Inca fibre washers are a durable jointing for general purpose, medium performance duties Suitable for steam, condensate, water, air, oils, solvents BSP OD ID mm mm 8" " " " " " NITRILE O RINGS Sold per 0 A basic range to fit either BSP(M) or BSP(F) threaded joints suitable for water, oil, petrol, etc. To BS 806 standard. Sizes are approx. Temp. range approx: -0 to + 20 C Dia. ID ID OD BSP(M) BSP(F) " " " 2" " " mm thick Meets all requirements of BS7 Grade Y WRAS approved for use with hot and cold potable water up to 8ºC SECTION

36 The Aquafax Catalogue Valves, Pipe Fittings, Gas Equipment, Hose & Clips Hull & Engine Room Fittings 2 Plastic Seacocks & Pipe Fittings Ultraflex Controls & Steering 4 Paints, Sealants & Consumables 6 General Boat Equipment and Accessories Cabin Fittings, Hinges, Padlocks, & General Hardware 7 Electrical - Batteries, Cables, Terminals, Chargers & Inverters 8 9 Calorifiers, Toilets, Pumps, Taps, Sinks & Fittings Johnson Pump - Engine Cooling, Bilge, Deckwash & Macerators 0 M Mastervolt Electricals - Complete Systems Lewmar - Windlasses, Anchors, Thrusters, Winches, Hardware & Steering L Narrowboat Equipment NB We offer over 6,000 quality marine and industrial products from all around the world. Our range can be viewed online or in the Aquafax printed catalogues. 6 SECTION