Features: Dimensions (in.) Number Size A B C D E F G H WT/100
|
|
- Erin Harvey
- 5 years ago
- Views:
Transcription
1 Apollo Full Flow Sea Flange Valves An bronze ball type valve developed to replace plug and other types of sea cocks in the boating industry. Features like these make the full flow Apollo Sea Flange your best choice for long-lasting performance and value. Underwriters Laboratories listed All AYBA recommended materials All bronze wetted metallic components Large flow ports (designated by F at the end of the part #)** RPTFE seats and seals Chromium plated bronze ball resists damage from marine growth Easy on-off operation Winterizing drain plug No thumb screws to create seal Compact, streamlined efficient design No lubrication required Bonding screw standard 1. Lever & grip 7. Seat (2) 2. Gland screw 8. Stem 3. Stem seals 9. Body 4. Body seal, except 3/4 10. Lever nut 5. Retainer 11. Plug 6. Ball Part Thread F** 3/4" " /4" F** 1 1/2" " /2" A 3" A 4" * Contact Customer Service for availability on locking handle option Apollo Economy Sea Flange Valves Same great features and quality all-bronze construction as Full Flow Sea Flange valves, but with standard port design and lower cost. Part Thread /4" /2" * Contact Customer Service for availability on locking handle option 2
2 Center tap drain allows winterization of the valve. Bonding screw allows valve to be connected to the vessel s bonding system /900 Series Bronze Valve with Center Drain Bronze body Chromium plated brass ball RPTFE seats and stuffing box ring Blow-out-proof stem design Mounting pads Tapered pipe threads /4" " /4" /2" " The bronze full port Apollo with mounting pads for easy, secure installation and quick, convenient bonding. Use in any valve application where full flow is required. Bronze Body Chromium Plated Brass Ball RPTFE Seats And Stuffing Box Ring Blow-Out-Proof Stem Design Stainless Steel Lever And Nut Series Shut-Off Valve Options: 316 stainless steel ball and stem Part NPT /4" NC /8" NC /2" NC /4" NC " /4-20NC /4" /4-20NC /2" /16-24NF " /16-24NF /2" /4-20NC
3 Series Shut-Off Valve The mainstay of our valve line. Dependable, competitive and available with stainless steel lever and nut. Bronze body Chromium plated brass ball RPTFE seats and stuffing box ring Blow-out-proof stem design Options: 316 stainless steel ball and stem A B C E D NPT Number Size A B C D E WT/ /4" /8" /2" /4" " /4" /2" " A 2 1/2" " Port Fuel Tank Selector Ball Valve Models & A Unique ball design allows for higher flow capacities. Perfect for tank selection on larger vessels. Five port construction allows access to four tanks using only one valve. Five NPT connections Bronze ball valve with stainless steel lever and nut RPTFE stem packing (virgin seats) Stem packing adjustable for wear 50 psig pressure rating Operation: Four selected inlets feed one common outlet - pointer on handle indicates the selected inlet Non-lubricated Easy mounting design /2" A 3/4" /
4 Fuel tank selection, oil transfer, and water tank selection are only a few of the uses for this versatile valve. Bronze body Chromium plated bronze ball RPTFE seats and stuffing box ring Mounting/bonding pads Blow-out-proof stem design 400 psig service rating Adjustable packing gland Series Three-Way Diverter Valve FLOW PATTERN NOTE: Open port pressure must exceed Closed port pressure Also available in all Stainless Steel. Specify Series. Number Size A B C D E F G H I WT/ /2" /4" " /4" / /2" / " / Quality bronze valve features mounting ears for quick easy installation, and positive mounting. Can also be used for bonding. Surface mounted 400 psig service rating RPTFE seats and seals All wetted metallic parts are brass or cast bronze Fast 90 on-off turn Tested 100 psig air under water Optional with stainless steel ball and stem Ball Type Fuel Shut-Off Valve NPT Both Ends (Optional Tee Handle Illustrated) Number Size A B C D E WT/ /4" /8" /2" /4"
5 Bronze Ball Cone Check Valve 61 Series SHOWN Prevents reverse flow with minimum change in flow velocity. Tight shut off No radial alignment necessary Straight through and streamlined for minimum change in velocity Ball-Cone Check Is spring loaded for fast seating action (constructed of RPTFE) Not recommended for reciprocating pumps and similar applications conducive to repetitious vibrations Optional light spring Soft seat design - specify Series Solder connections specify Series Part Part Approximate Number Number Size A B C Open Pressure WT/ /4" 2-1/16 1 1/8 1 1/8 1/2 PSIG /8" 2-1/8 1 1/8 1 1/8 1/2 PSIG /2" 2-5/18 1 1/8 1 1/8 1/2 PSIG /4" 2-7/8 1 3/8 1 1/2 1/2 PSIG " 3-1/2 1 3/4 1 15/16 1/2 PSIG /4" 4-3/16 2 1/8 2 3/8 1/2 PSIG /2" 4-15/16 2 1/2 2 13/16 1/2 PSIG /16 1/2 PSIG 630 Stainless Steel Ball Cone Check Valve 62 Series Prevents reverse flow with minimum change in flow velocity. Tight shut off No radial alignment necessary Straight through and streamlined for minimum change in velocity Ball-Cone Check Is spring loaded for fast seating action (constructed of RPTFE) All wetted metal parts are 316 stainless steel Not recommended for reciprocating pumps and similar applications conducive to repetitious vibrations Optional light spring Soft seat design - specify Series SHOWN Part Part Approximate Number Number Size A B C Open Pressure WT/ /4" 2-1/16 1 1/8 1 1/8 1/2 PSIG /8" 2-1/8 1 1/8 1 1/8 1/2 PSIG /2" 2-5/18 1 1/8 1 1/8 1/2 PSIG /4" 2-7/8 1 3/8 1 1/2 1/2 PSIG " 3-1/2 1 3/4 1 15/16 1/2 PSIG /4" 4-3/16 2 1/8 2 3/8 1/2 PSIG /2" 4-15/16 2 1/2 2 13/16 1/2 PSIG " /16 1/2 PSIG 630 6
6 Conbraco offers a wide selection of thru-hull connections and components, available in a wide range of sizes in both chrome plated or plain bronze. ** = Specify BF for Bronze Fitting only. Specify BN for Bronze Fitting with nut. Specify CF for chrome fitting only. Specify CN for Chrome Fitting with nut. Designed and built with large surface to distribute load, for longer service life and more reliable connections; bronze. Part No. Size A B C D WT/ /2" /2" NPSM /4" /4" NPSM " " NPSM* /4" /4" NPSM* /2" /2" NPSM* " " NPSM* /2" /2" NPSM* " " NPSM* " " NPSM 369 * = Also available in British threads (BSP). Thru-Hull Connections and Components Bronze Flange Nuts Plain Bronze Finish Only For connections below the waterline; Bronze Part No. Size A B C D E WT/100** 65-**7-63 1/2" /2" NPSM **7-50 3/4" /4" NPSM **7-51 1" " NPSM* ** /4" /4" NPSM* ** /2" /2" NPSM* **7-54 2" " NPSM* ** /2" /2" NPSM* **7-64 3" " NPSM* **7-66 4" " NPSM 746 * = Also available in British threads (BSP). ** = Weights are listed without nuts Thru-Hull Connections (Excludes 1/2, 3/4 ) Extra long to allow for thru-hull connections through the transom or through the bottom of foam filled hulls; bronze. Max.Hull Part No. Thickness A B C D E Pipe Size WT/100** 65-** /4" NPSM ** " NPSM ** /4" NPSM ** /2" NPSM ** " NPSM ** /2" NPSM 314 ** = Weights are listed without nuts Extra Long Thru-Hull Connections (Excludes 3/4 ) 7
7 Thru-Hull Connections and Components Recommended for use above the waterline; bronze. Thru-Hull Connections - Barbed (Excludes 1/2, 3/4 ) Pipe Hose Max. Size Size Part No. Hull A B C D E F G WT/100** 65-** /2" NPSM ** /4" NPSM ** " NPSM ** /4" NPSM ** /2" NPSM ** /4" NPSM ** = Weights are listed without nuts 90º Thru-Hull Assembly with Hose Adapter Allows hose to be connected to thru-hull in tight spaces above the waterline. Ideally suited for generator exhaust outlet, fish box drain, cockpit drain and air conditioning outlet. Patented design simplifies installation, lowers cost and improves the integrity of the connection. Features a unique bonding tab for protection against galvanic corrosion; bronze. Elbow available seperately (add E to suffix). U.S. Pat No. 5,456,499 Min.-Max. Part Hose Hull Hex No. Size Thickness Size A B C D E WT/100** 65-**8-54 3/ **8-59 3/ **8-60 3/ ** /8 1-1/ ** /8 3/8 1-1/ ** /4 3/8 1-1/ ** /2 3/8 1-1/ ** /8 1-1/ Consult factory for additional hull thickness range. **= Specify BF for Bronze, CF for Chrome. ** = Weights are listed without nuts 8
8 Intake Strainer One Piece Designed for long life, easy installation; bronze. (Excludes 1/2, 3/4 ) Max Hull Strainer Part No. Thickness Dim. In A B C D E F Pipe Size WT/100* 65-** X /2" NPSM ** X /4" NPSM ** X " NPSM ** /4 X4 1/ /4" NPSM ** /2 X4 3/ /2" NPSM ** /2 X4 3/ " NPSM 429 ** = Specify BF For Bronze Fitting Only. Specify BN For Bronze Fitting With Nut. * = Weights are listed without nuts 9
9 Pipe To Hose Adapter Features single-piece construction. Cast-in wrench flats make installation easier bronze. Part No. NPT Hose I.D. A B C D WT/ /2" 1/2" or 5/8" /4" 3/4" * 1" 1" * 1 1/4" 1 1/4" * 1 1/2" 1 1/2" * 2" 2" * 2 1/2" 2 1/2" * 3" 3" / * 4" 4" / * Also available in British Threads (BSP) 90º Pipe To Hose Adapter One-piece adapter simplifies right angle connections. Cast with wrench flats for easy installation; bronze. Part No. NPT Hose Size Hex A B C D E WT/ /2" 1/2" and 5/8" 5/8" /4" 3/4" 7/8" * 1" 1" 1 1/8" * 1 1/4" 1 1/4" 1 3/8" * 1 1/2" 1 1/2" 1 5/8" * 2" 2" 2 1/8" * 2 1/2" 2 1/2" 2 5/8" * 3" 3" 3 1/8" " 4" 4 1/8" * Also available in British Threads (BSP) 10
MARINE VALVES AND FITTINGS
Sea Flange Valves APOLLO FULL FLOW SEA FLANGE VALVES An 85-5-5-5 bronze ball type valve developed to replace plug and other types of sea cocks in the boating industry. Features like these make the full
More informationSECTION E CONTENTS THREE WAY VALVES DESCRIPTION
SECTION E CONTENTS THREE WAY VALVES DESCRIPTION PAGE 70-600 Series, Threaded Bronze E-1 70-900 Series, Solder Bronze E-2 76-600 Series, Threaded Stainless Steel E-3 77-640 Series, Full Port E-4 3-Way Valve
More informationSee Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section.
See Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section. water gauges 20-100 Series light Pattern Bronze Water Gauges LEAD FREE OPTION COMING SOON!
More informationSeries. Stainless Steel Ball Valve 1/4-1
76-100 Series Stainless Steel Ball Valve 1/4-1 Threaded, 2000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C,
More informationCarbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationSECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
More information29 Series OEM Style Bronze Safety Valves for Steam, Air and Non-Hazardous Gas
Section I Power Boilers OEM Style for Steam, Air and Non-Hazardous Gas Section VIII Pressure Vessels Conbraco is ideally suited for OEM applications where compact size, dependable performance and maximum
More informationPneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:
COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball
More information87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
More information62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves
Table of Contents Bronze Ball Valves 3 Series See Commercial Price List [CPPL9000] 70 Series...4-5 71 Series...5 75 Series...6 77 Series...7-8 77C Series...8-9 77W Series See Commercial Price List [CPPL9000]
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationSeries 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
More informationBRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More information3/4 Fittings. 3/4 Fittings
091911 33 Qwik-Lok Fittings Qwik-Lok Sockets MA-014 Qwik-Lok Socket, Straight Latching Arm Holds socket securely in place. Locking Ring Locks Latching Arms and used for 2-finger socket removal. Hose Stop
More informationSECTION J CONTENTS OPTIONAL CONFIGURATIONS DESCRIPTION
SECTION J CONTENTS OPTIONAL CONFIGURATIONS DESCRIPTION PAGE Options Identification & Description J-1 Options Identification & Description J-2 Options Identification & Description J-3 Options Identification
More informationVents & Fuel Fittings. Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys
7 Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys Hose Adapter Drains Deck Fills Deck Fill Keys Gas Tank Vents Ski Tows Vents & Fuel Fittings 7 Vents & Fuel Fittings LOUVERED
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationMAINTENANCE MANUAL. Covering Models: Series (1/4-10 ) S Series (1/4-1 ) Series (3-10 )
BFMM4000 1-09 MAINTENANCE MANUAL Covering Models: 40-200 Series (1/4-10 ) 40-200S Series (1/4-1 ) 40-700 Series (3-10 ) REDUCED PRESSURE PRINCIPLE (RPZ) BACKFLOW PREVENTERS 1/4" - 10" AND REDUCED PRESSURE
More informationBA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical
More informationTable of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More informationCall for Pricing
Brass Hex Extension Elbows Pipe A Positive Socket Wrench Installation 1-piece Construction Ensures Positive Alignment and Complete Removal Easy Length Adjustment with Adjustable Threads Custom Elbows are
More informationSECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
More informationValve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
More informationBRASS & BRONZE VALVES
BRASS & BRONZE VALVES V200 series Cast Brass are economical general service valves. Ball valves feature chrome plated balls with teflon seats, adjustable packing glands and blowout-proof stems. V205 gate
More informationBall Valves. Full Port Ball Valves - Compression w/ Drain Cap - Forged Brass. Full Port Mini Ball Valve - Forged Brass 05/06/15
05/06/15 G8 Full Port - Compression w/ Drain Cap - Forged Brass Rated for cold water, oil & gas Blow-out proof stem Temperature Range: -30 to 150C (-22 to 302F) Working Pressure: 600 psi Blue handle Lead-Free
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More information08 general Purpose Pumps
070 08 general Purpose Pumps InTRODuCTIOn Ballast Pumps Today s Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested
More informationFROM SIMPLE TO COMPLEX DESIGNS. Flo-Tite Offers A Complete Line of High Quality Engineered Ball Valves For Your Most Demanding Applications
SG-2013 BALL VALVES FROM SIMPLE TO COMPLEX DESIGNS Sanitary Valves Cryogenic Valves Automated Valves Fusible Link Valves Cavity Filled Valves V-Port Control Valves Dribble Control Valves Instrumentation
More informationSanitary Solutions Valves/Product Recovery System Catalog Distributed By:
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions
More informationSeries 4600F. HSC Fire Pumps & Packaged Systems
Series 4600F HSC Fire Pumps & Packaged Systems FILE NO: F43.11 DATE: May 26, 2008 SUPERSEDES: F43.11 DATE: Dec. 15, 2007 Series 4600F Series 4600F - Truly Superior The Series 4600F, drawing on over 100
More informationSuction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3
Special Purpose Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x 20...2 Technical Data...3 Triple Duty Valve - Iron Body Style TDV 125# Flanged 2-20...4 Technical Data...5 Pressure
More informationUsed for Safety Shower combination stations: SE-603 SE-616 SE-690 SE-693 SE-695 SE-697
INSTRUCTIONS FOR MODELS Used for Safety Shower combination stations: SE-60 SE-616 SE-690 SE-69 SE-695 SE-697 Pipe Wrench Adjustable Wrench TOOLS AND SUPPLIES Strap Wrench Hex Key Wrench Level Not Included
More informationMueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
More informationMADE IN THE USA BACKFLOW PREVENTERS
MADE IN THE USA BACKFLOW PREVENTERS TABLE OF CONTENTS Selection Guide........................................................................3 Double Check Valve (Series 40-100)......................................................4,5
More informationBrown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
More informationBALL VALVES. Industry-Leading 300psi Low Lead Ball Valves
BALL VALVES Industry-Leading 300psi Low Lead Ball Valves Designed and Manufactured to Meet Your Needs 1 Lockwing Accepts bullet lock (when equipped on meter valve). 2 Stainless steel reinforced seat gaskets
More informationA Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide PDF processed with CutePDF evaluation edition www.cutepdf.com 3 Piece Valves Triad Series Models FP/SP-2000/3000
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationJHawk Instrument Inc. warrants the
Warranty Statement JHawk Instrument Inc. warrants the component parts and workmanship of its products under normal use and service for a period of one year from the date of the shipment. All obligations
More informationWATER GAUGES AND LIQUID LEVEL GAUGES
Available Water Gauges 20-100 Series Standard Pattern 20-150 Standard Pattern Automatic 20-200 Series Heavy Pattern 20-250 Heavy Pattern Automatic 20-300 Series 20-350 Series Automatic 20-410 Series Left
More informationRecoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION
Polyurethane Recoil Hose Greater durability than Nylon or Hytrel recoil hoses due to exceptional wear characteristics Longer life expectancy due to kink resistant properties Superior recoil memory due
More informationFIRE PUMPS & PACKAGED
4600F Series HSC FIRE PUMPS & PACKAGED Systems FILE NO: 11-1 DATE: December 2004 SUPERSEDES: K13.110 DATE: April 1998 4600F Series Horizontal split case HSC fire pumps Armstrong Holden Brooke Pullen takes
More informationLubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
More informationDWS 41. Installation Data 44 Performance Specs DWS & DW-PRV Series
IRRIGATION Title Description Details Page Intro 3 2000 Series 4 Model 2000 Solenoid 1 3 12 Model 2000 Solenoid 4 8 15 Model 2030 Low Power Solenoid 1 3 17 Model 2030 Low Power Solenoid 4 8 19 Model 2160
More informationcatalog C-NPS-1014 NIBCO Press System
catalog C-NPS-1014 ahead of the flow NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
More informationDCAP Series 40-4 X X - X X X. Dual Check w/ Atmospheric Port Backflow Preventers
Dual Check w/ Atmospheric Port DCAP Series DUAL CHECK WITH ATMOSPHERIC PORT BACKFLOW PREVENTER The Apollo DCAP Series Backflow Preventer is designed to protect residential and commercial water supply lines
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationS200-P Passport Series Fire Pump Service Parts List
Document Number Issue Date 04/08/13 Rev. Date 9/24/18 S200-P Passport Series Fire Pump Service Parts List Index: Component See Pages Body and Impeller 2, 3 Pedestal and Primers 4, 5 Cross Section Views
More informationLubrication Fittings. General Information. Alemite Lubrication Fittings include:
General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11
More informationSPEAKMAN. SE-675 Installation, Operation, and Maintenance Instructions SAFE-T-ZONE EMERGENCY SHOWER AND EYE/FACE WASH
SE-675 Installation, Operation, and Maintenance Instructions SAFE-T-ZONE EMERGENCY SHOWER AND EYE/FACE WASH DESCRIPTION Floor mounted emergency deluge shower and non-aerated eye/face wash combination unit.
More informationTaps, Valves & Components. Section 1
Taps, Valves & Components Section 1 taps, valves & components index Index 1 SECTION PAGE sink taps 1.1-1.4 sink taps & spares 1.5 basin taps 1.6 general purpose taps & valves 1.7 flexible connectors, angle
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationQuality, Service. A history of. and Innovation
A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company s headquarters
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
More informationVALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines
230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationVES VAL NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW
...170-214 LEAD FREE...171-174 LEAD FREE BALL...171-173 BRASS...175-197 LF Gate and Check valves... 174 Full Port Ball... 175 Locking Handle... 176 Butterfly Handle... 177 MIP x FIP... 188-189 N/P Ball
More informationHYDRAULIC VARIABLE PUMPS
HYDRAULIC VARIABLE S EFFICIENT VARIABLE DELIVERY Checkball pump delivery is controlled by variable inlet ports in each piston pumping chamber. In these hydraulic variable models, output is regulated by
More informationSECTION VALVES. A. Extent of Valve Work is indicated on the Drawings and by the Requirements of this Section.
PART 1 GENERAL 1.01 DESCRIPTION OF WORK SECTION 22412 VALVES A. Extent of Valve Work is indicated on the Drawings and by the Requirements of this Section. B. All valves, except those are 2 in diameter
More informationAIR SHOWER & TUB REP
SHOWER & TUB REPAIR 02-2091 Price Pfister, Ball Joint, O-Ring, 403927 For Shower Head. 03-1251 403954 Fiberglass Shower Drain, Fits 2 Cast Iron, Steel, ABS, or PVC, Seals With Compression Gasket. 02-3027
More informationMarine Catalog Second Edition
Marine Catalog Second Edition Company Information... 3 Valves, Actuators and Cable... 5 Aerators... 11 3/4 Fittings... 17 1-1/8 Fittings... 25 Accessories... 31 Parts & Hardware... 35 Our Team Flow-Rite
More informationAccutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs
s Meriam s Flow Sensors are lab-tested and field-proven flow elements perfect for gas, liquid or steam service. With thousands in use worldwide, the continues to be the right choice when ease of installation,
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
More informationPRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationR.C. PLATH CO. Specialty Marine Hardware 2010 PLATH
R.C. PLATH CO. Specialty Marine Hardware 2010 PLATH Specialty Marine Hardware Portland, Oregon The finest accessories for adding safety, pleasure, and value to your craft. No craft too small or large for
More information1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
More informationDOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES Table of Contents DESCRIPTION PAGE Standard Compliance... 2 Advantages... 3 Resilient Seat Exploded View... 4 Fire Safe Seat Exploded View... 5 CLASS 15
More informationPB18 Series Portable Pump Assembly Service Parts List
Document Number Issue Date 09/20/94 Rev. Date 02/02/12 PB18 Series Portable Pump Assembly Service Parts List Index: Component Pump Model (Located on Pump Serial Plate) See Page PB18-2515, PB18-2515B 2,
More informationDistributed By: M&M Control Service, Inc
A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company s headquarters
More informationTHE DEFENDER 4D-200 SERIES
THE DEFENDER 4D-200 SERIES SPECIFICATIONS The Reduced Pressure Principle Assembly shall protect against backflow by either backpressure or back-siphonage from a crossconnection between potable water system
More informationSERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19
More informationSuction Guide & Flo-Trex Valve Series
Suction Guide & Flo-Trex Valve Series Pump Trim FILE NO: 6-1 DATE: August 2010 SUPERSEDES: 6-1 DATE: July 200 Series SG & FTV Suction Guides Designed for direct mounting on the suction flange of horizontal
More informationINSTALLATION, OPERATION, AND MAINTENANCE MANUAL
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL MODEL 4D-200 REDUCED PRESSURE PRINCIPLE (RPZ) & MODEL 4D-700 REDUCED PRESSURE DETECTOR ASSEMBLY (RPDA) BACKFLOW PREVENTERS 2 ½ 10 Conbraco Industries Inc.
More informationSAN JUAN ENGINEERING & MANUFACTURING CO. 766 Marine Drive Bellingham, WA USA PH: (360) FAX: (360)
SANJUAN FRESH WATER COOLING Remove automatic drain, (a) Locate the SYSTEMSt automatic drain reservoir (ADR) on the front, right side and mounted low. (Gray plastic unit with blue plastic drain plug). 4.3/5.0/5.7
More informationGuide Specification SECTION HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 21 16 - HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Air
More informationStandard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
More informationPRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
More informationKENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
More informationInstallation. Installation. 12. System Diagram... 10
Pressure Control Systems Installation Instructions Form No. F-1031 Section 3010 Issue Date 08/20/96 Rev. Date 9/11/17 Table of Contents Discharge Relief Valve System System Description....................................
More informationAnti Siphon Ballcock RP Anti-Siphon Ballcock
UR PS1115 Effective November 1, 2015 (SUPERCEDES PS0514 ) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Anti Siphon Ballcock 109-603RP Anti-Siphon
More informationValves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
More informationAvailable with T93R MAXX Tip & Guard
7500 PSI (500 BAR) Maximum Pressure Airless Gun High-strength aluminum alloy handle is light-weight, solid and strong single piece forging that features an anodized protective finish that is highly corrosive
More informationTYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationSOLDER RING FITTINGS GENERAL RANGE
Product Guide Size Pk Pk Code SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are designed for jointing tubes to BS EN 7 in hot and cold
More informationPRESSURE RELIEF VALVES AND ACCESSORIES FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS. safety and relief valve catalog
PRESSURE RELIEF VALVES AND ACCESSORIES FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS safety and relief valve catalog Table of Contents PRODUCTS Valve Selection Guide.......................................................................
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationBid # Plumbing Supplies RESULTS
BOARD APPROVED Bid # 15-4 - Plumbing Supplies Page 1 of 16 Grant Plumbing North Brunswick NJ PVC PIPE, SCHEDULE 40 1 1-1/4" PVC Pipe, SCH 40, 20' feet 60 $0.598 $35.88 2 1-1/2" PVC Pipe, SCH 40, 20' feet
More informationALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
More informationSOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationBALL VALVE PRICE LIST BVPL9000 EFFECTIVE 22JAN18
BALL VALVE BVPL9000 EFFECTIVE 22JAN18 BRONZE BALL VALVES 70 Series...6-7 70B Series...8 70-HC Series...8 70LF Series...9 70LF-HC Series... 10 71 Series... 10 75 Series...13 77 Series... 16 77C-A Series...
More informationMueller 300 Ball Valves Industry-leading 300psi low lead ball valves
Mueller 300 Ball Valves Industry-leading 300psi low lead ball valves Mueller 300 Ball Valves Your assurance of quality, dependable ball valves The ball valve designed for 300 psig working pressure Before
More informationBronze Y Type Strainers
SETION 9a Bronze Y Type Strainers Tel: + ()95 7 Fax: + ()95 72 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents and Numerical Index Bronze Y Strainers ontents Page Figure Number
More informationPRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
More informationBALL VALVE PRICE LIST BVPL9000 EFFECTIVE 18SEP17 (REVISED 05SEP17)
BALL VALVE BVPL9000 EFFECTIVE 18SEP17 (REVISED 05SEP17) BRONZE BALL VALVES 70 Series...6-7 70B Series...8 70-HC Series...8 70LF Series...9 70LF-HC Series... 10 71 Series... 10 75 Series...13 77 Series...
More information509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
More informationSECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More information