P/A INDUSTRIES A BRIEF HISTORY

Transcription

1 SERVO FEEDS

2 P/ INDUSTRIES BRIEF HISTORY For well over half a century, P/ Industries has been providing equipment and application solutions to the Metal Stamping, Wire Forming and Electronic Connector Industries. proven industry leader, we are committed to our customers. We ve led the industry in product development since our first Servo was introduced in With over 7,000 P/ Servo Feeds in the field, we know that each application is unique. P/ s Sales and Design Engineers have years of hands-on experience with Servo technology and work closely with our Service Team to continuously improve our products. t P/, we are ready to help you design an application solution to increase your productivity and maintain your high quality standards. Management & Sales Team Executive Regional Sales Jerome E. Finn Chairman Since 1975 Edward Morris President Since 1999 Don Frank Regional Sales Manager Since 1996 Tim Qualls Regional Sales Manager Since 2002 Mark Beiner Regional Sales Manager Since 2006 Inside Sales Service Engineering Joe Palmer Inside Sales Manager Since 2004 Ken Jansen Sales Engineer Since 1993 John Labowski Sales Engineer Since 1999 David Gaffey Service Manager Since 1979 Dave Burnham Sales & Service Since 1999 Chris Crider Engineer Manager Since 1983 P/ International P/ Industries Inc. Headquarters U.S.. P/ GmbH P/ Mectool B P/ Bohemia SRO PROMK P/ BRSIL Ltda GERMNY SWEDEN CZECH REPUBLIC TURKEY 2

3 TBLE OF CONTENTS Servo Feed Page Roll Max. Stock Stock Model Number Diameter Thickness Width Micro inch.040 inch inch 35 mm 1,01 mm mm Mini inch.078 inch inch 45 mm 2,00 mm mm Edge inch.100 inch inch 90 mm 2,54 mm mm dvantage inch.188 inch inch 90 mm 4,78 mm mm Dynamax inch.040 inch inch 85 mm 1,00 mm mm Magnum inch.400 inch inch 120 mm 10,16 mm mm Maximus inch.500 inch inch 152 mm 12,70 mm mm Servo Feed Model.375 inch inch with Pull-Thru 18 Straightener Dependent 9,35 mm mm Stagger Model.188 inch inch Feed 20 Dependent 4,78 mm mm Profiled Parts Model.040 inch inch Feed 21 Dependent 1,01 mm mm Model Model Model Push-Pull 22 Dependent Dependent Dependent Bullet Series 23 Hi-Speed Feed Series Sequential Controls 24 Provides the ability for step feeding, tool signaling, gagging and multiple programs off of one press Options 25 Guide s, Strip Encoders, Limit Switch, Pilot Releases, Cut-to-Length Systems Reference 26 Production, Consumption, Speeds, Weights, Loop rea 3

4 MICRO FEED MECHNICL FETURES Hard Chrome Feed Rolls with Matte Finish to Provide Increased Grip djustable Roll Lift Quick Change Rolls Can be Machined to ccept Wire or Profiled Material Feed Rolls are Mounted in Permanently Sealed nti-friction Ball Bearings Two Quick Release djustable Edge Stock Guides Entrance Material Support Pneumatic Pilot Release ELECTRONIC FETURES ISO Certified Electrical Components wired to JIC, NEC and CE Standards Backlit, LCD Touchscreen Display Inch/Metric, Multi-Language Selectability Mushroom Emergency Stop with uxiliary Contacts for Multi-Unit Stop NEM 4/12/13 Enclosure Feed Complete Programmable Output Relay Batch Counter Jog-To-Length Built-In I/O Diagnostics Check Feed Synchronization Confirmation High Performance Digital Servo Drive, PLC and Motor Optional Hand Held Remote Jog Pendant MECHNICL OPTIONS Exit Support Bridge to Prevent Stock Buckling Feed Mounting Bracket for up to 2.3 (59 mm) of Die Height djustment Control Stand Polyurethane Coated Upper Roll for delicate material Factory Profiled Rolls 4

5 MICRO FEED SPECIFICTIONS SFE WORKING SPEEDS T VRYING LENGTHS Feed ngle at 270 Feed ngle at 180 Feed ngle at 90 TDC TDC TDC Strokes Per Minute Feed Length 25mm 50mm 75mm 100mm 125mm 150mm Performance data shown is for estimating purposes only. Production rates and capacities are dependent upon feed length and material. Consult P/ for specific application needs. DIMENSIONS Optional Exit Support Bridge Overall Height 10.9 (277 mm) Pass Line 2.2 (57 mm) 5.8 (149 mm) Optional Mounting Plate (258 mm) B DIMENSIONS inches Model B MF MF MF DIMENSIONS mm Model B MF MF MF SPECIFICTIONS US Feed Max Full Pulling C Model in. in. in. in. lbs. lbs. V/Ph/Hz kw MF-2P /1/ MF-4P /1/ MF-6P /1/ SPECIFICTIONS METRIC Feed Max Full Pulling C Model mm mm mm mm N N V/Ph/Hz kw MF-2P 35 1,52 1, /1/50 0,2 MF-4P 35 1,52 0, /1/50 0,2 MF-6P 35 1,52 0, /1/50 0,2 5

6 MINI SERVO ROLL FEED MECHNICL FETURES Rugged Steel Frame Unique Design Maintains Roll Parallelism with Off Center Loading Pilot Release Roller Cam Hand Knobs With Vernier Scale djust Roll Pressure on Material Hard Chrome Feed Rolls with Textured Finish To Provide Increased Grip Feed Mounting Bracket for up to 2.4 (61 mm) of Pass Line Height djustment Precision Gear Driven Upper Roll with nti-backlash Exit Support Bridge to Prevent Stock Buckling Stock Thickness djustment Lever Two Quick Release djustable Edge Stock Guides Roll Release Lever for Strip Insertion with Safety Lock Feed Rolls Mounted in Permanently Sealed nti-friction Ball Bearings ELECTRONIC FETURES ISO Certified Electrical Components wired to JIC, NEC and CE Standards Backlit, LCD Touchscreen Display Inch/Metric, Multi-Language Selectability Mushroom Emergency Stop with uxiliary Contacts for Multi-Unit Stop NEM 4/12/13 Enclosure Free Standing and Portable Console Stand Feed Complete Programmable Output Relay (Can Be Used for Cut-To-Length pplications) Batch Counter Jog-To-Length Built-In I/O Diagnostics Feed Synchronization Confirmation High Performance Digital Servo Drive, PLC and Motor Hand Held Remote Jog Pendant MECHNICL OPTIONS Pneumatic Release of Upper Roll for Strip Insertion and Piloting Mechanical Release By djustable Ram Mounted, Bullet Nose Cam Bar Extra Roll Opening 6

7 MINI SPECIFICTIONS SFE WORKING SPEEDS T VRYING LENGTHS Feed ngle at 270 Feed ngle at 180 Feed ngle at 90 TDC TDC TDC Strokes Per Minute Feed Length 25mm 50mm 75mm 100mm 125mm 150mm Performance data shown is for estimating purposes only. Production rates and capacities are dependent upon feed length and material. Consult P/ for specific application needs. DIMENSIONS B Pass Line Height djustment 2.4 (61 mm) djustable Pilot Release Roller Cam Bar 15.9 (404 mm) 9.4 (238 mm) 14.3 (363 mm) DIMENSIONS inches Model B SRF-105P SRF-220P SRF-320P DIMENSIONS mm Model B SRF-105P SRF-220P SRF-320P SPECIFICTIONS US Feed Max Full Pulling C Model in. in.* in. in. lbs. lbs. V/Ph/Hz kw SRF-105P /1/ SRFX-105P /1/ SRF-220P /1/ SRFX-220P /1/ SRF-320P /1/ SPECIFICTIONS METRIC Feed Max Full Pulling C Model mm mm* mm mm N N V/Ph/Hz kw SRF-105P 45 2,00 1, /1/50 0,4 SRFX-105P 45 2,00 2, /1/50 0,8 SRF-220P 45 2,00 0, /1/50 0,4 SRFX-220P 45 2,00 1, /1/50 0,8 SRF-320P 45 2,00 1, /1/50 0,8 * Optional Max. Roll Opening.098 inch * Optional Max. Roll Opening 2,5 mm 7

8 EDGE SERVO ROLL FEED MECHNICL FETURES Rugged Steel Frame Unique Design Maintains Roll Parallelism with Off Center Loading Precision Gear Driven Upper Roll with nti-backlash Roll Release Lever for Strip Insertion with Safety Lock Stock Thickness djustment Lever Large Diameter, Hard Chrome Feed Rolls are Texturized for Increased Grip Feed Mounting Bracket For 2.4 (61 mm) of Die Height djustment Pilot Release Roller Cam Exit Support Bridge to Prevent Stock Buckling Feed Rolls Mounted in Permanently Sealed, nti-friction Ball Bearings MECHNICL OPTIONS Pneumatic Release of Upper Roll for Strip Insertion and Piloting Edge Squaring Guides Mechanical Release by Mounted, djustable Bullet Nose Cam Bar Feed Mounting Cabinet with 12 (305 mm) of Height djustment Urethane Covered Catenary Rolls for dditional Material Protection Self-Centering Edge Guides for Strip Insertion ELECTRONIC FETURES ISO Certified Electrical Components Wired to JIC, NEC, & CE Standards Backlit, LCD Touchscreen Display Built-In I/O Diagnostics ssists in Troubleshooting Batch Counter Password Protected Job Storage On-The-Fly, Micro djust Feed Length Inch/Metric, Multi-Language Selectability Single Stroke or Continuous Press Mode Capability Jog Pendant Jog-To-Length Capability High Performance Digital Servo Drive nd Motor NEM 4/12/13 Enclosure Free Standing and Portable Console Stand Mushroom Emergency Stop with uxiliary Contacts for Multi-Unit Stop Lockable Power Disconnect Switch ELECTRONIC OPTIONS Integral Programmable Limit Switch for Setting Feed ngle, Cycle Reset, and Pilot Release with Digital Press Crankshaft Position Indicator SFI (Servo Feed Interface) Provides Communication with External Devices Cut-To-Length Systems vailable Sequential Feed Control Feed To Registration End of Stock Sensor Mounted to Entry Plate uxiliary Strip Encoder 8

9 EDGE SPECIFICTIONS SFE WORKING SPEEDS T VRYING LENGTHS Feed ngle at 270 Feed ngle at 180 Feed ngle at 90 TDC TDC TDC Strokes Per Minute Feed Length 25mm 50mm 75mm 100mm 125mm 150mm 175mm 200mm 225mm 250mm 275mm 300mm Performance data shown is for estimating purposes only. Production rates and capacities are dependent upon feed length and material. Consult P/ for specific application needs. DIMENSIONS Models SRF-125 thru SRF-600 Model SRF-100 B Pass Line Height djustment 2.4 (61 mm) 9.4 (239 mm) Pass Line Height djustment 2 (52 mm) 4.9 (124 mm) 12.6 (320 mm) 11.8 (300 mm) 6.4 (163 mm) 25.1 (638 mm) 4.9 (125 mm) 15.3 (389 mm) DIMENSIONS inches Model B SRF SRF SRF SRF SRF SRF SRF DIMENSIONS mm Model B SRF SRF SRF SRF SRF SRF SRF SPECIFICTIONS US Feed Max Full Pulling C Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SPECIFICTIONS METRIC Feed Max Full Pulling C Model mm mm mm mm N N V/Ph/Hz kw SRF ,50 2, /1/50 2 SRF ,50 2, /1/50 2 SRF ,50 2, /1/50 2 SRF ,50 2, /1/50 2 SRF ,50 1, /1/50 2 SRF ,50 1, /1/50 2 SRF ,50 1, /1/50 2 9

10 DVNTGE SERVO ROLL FEED MECHNICL FETURES Rugged Steel Frame Unique Design Maintains Roll Parallelism with Off Center Loading Precision Gear Driven Upper Roll with nti-backlash Roll Release Lever for Strip Insertion with Safety Lock Stock Thickness djustment Lever Large Diameter, Hard Chrome Feed Rolls are Texturized for Increased Grip Feed Mounting Bracket For 2.4 (61 mm) of Die Height djustment Pilot Release Roller Cam Exit Support Bridge to Prevent Stock Buckling Feed Rolls Mounted in Permanently Sealed, nti-friction Ball Bearings Precision Planetary Gearbox 5:1 Ratio Precision Planetary Gearbox 8:1 Ratio for Models SRF28 36 X Model offers a standard 8:1 Gearbox and extra thickness capacity MECHNICL OPTIONS Pneumatic Release of Upper Roll for Strip Insertion and Piloting Material Squaring Guides Mechanical Release by Mounted, djustable Bullet Nose Cam Bar Pull Through Straightener (See pages 18 & 19) Feed Mounting Cabinet with 12 (305 mm) of Height djustment Urethane Covered Catenary Rolls for dditional Material Protection Self-Centering Edge Guides for Strip Insertion ELECTRONIC FETURES ISO Certified Electrical Components Wired to JIC, NEC, & CE Standards Backlit, LCD Touchscreen Display Built-In I/O Diagnostics ssists in Troubleshooting Batch Counter Password Protected Job Storage On-The-Fly, Micro djust Feed Length Inch/Metric, Multi-Language Selectability Single Stroke or Continuous Press Mode Capability Jog Pendant Jog-To-Length Capability High Performance Digital Servo Drive nd Motor NEM 4/12/13 Enclosure Free Standing and Portable Console Stand Mushroom Emergency Stop with uxiliary Contacts for Multi-Unit Stop Lockable Power Disconnect Switch ELECTRONIC OPTIONS Integral Programmable Limit Switch for Setting Feed ngle, Cycle Reset, and Pilot Release with Digital Press Crankshaft Position Indicator SFI (Servo Feed Interface) Provides Communication with External Devices Cut-To-Length Systems vailable Sequential Feed Control Feed To Registration End of Stock Sensor Mounted to Stock Guide Table uxiliary Strip Encoder 10

11 DVNTGE SPECIFICTIONS SFE WORKING SPEEDS T VRYING LENGTHS Feed ngle at 270 Feed ngle at 180 Feed ngle at 90 TDC TDC TDC 500 Strokes Per Minute Feed Length 25mm 50mm 75mm 100mm 125mm 150mm 175mm 200mm 225mm 250mm 275mm 300mm Performance data shown is for estimating purposes only. Production rates and capacities are dependent upon feed length and material. Consult P/ for specific application needs. DIMENSIONS B 3.5 (89 mm) Pass Line Height djust. 2.4 (61 mm) 9.4 (239 mm) 12.6 (320 mm) DIMENSIONS in. Model B SRF SRF SRF SRF SRF SRF SRF SRF SRF DIMENSIONS mm Model B SRF SRF SRF SRF SRF SRF SRF SRF SRF (163 mm) Note: SRFX Models have same mechanical dimensions as SRF (638 mm) SPECIFICTIONS US Feed Max Full Pulling C Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRF /1/60 2 SRFX /1/60 2 SRFX /1/60 2 SRFX /1/60 2 SRFX /1/60 2 SRFX /1/60 2 SRFX /1/60 2 SPECIFICTIONS METRIC Feed Max Full Pulling C Model mm mm mm mm N N V/Ph/Hz kw SRF ,50 3, /1/50 2 SRF ,50 3, /1/50 2 SRF ,50 3, /1/50 2 SRF ,50 3, /1/50 2 SRF ,50 2, /1/50 2 SRF ,50 2, /1/50 2 SRF ,50 2, /1/50 2 SRF ,50 2, /1/50 2 SRF ,50 1, /1/50 2 SRFX ,77 4, /1/50 2 SRFX ,77 4, /1/50 2 SRFX ,77 4, /1/50 2 SRFX ,77 3, /1/50 2 SRFX ,77 3, /1/50 2 SRFX ,77 3, /1/

12 DYNMX SERVO ROLL FEED MECHNICL FETURES Rugged Steel Frame Unique Design Maintains Roll Parallelism with Off Center Loading Precision Gear Driven Upper Roll with nti-backlash Pneumatic Cylinders to provide Roll Pressure Pneumatic Pilot Release of Upper Roll for Strip Insertion and Piloting Smooth Finish Hard Chrome Feed Rolls Feed Mounting Bracket For 4.0 (102 mm) of Die Height djustment Exit Support Bridge to Prevent Stock Buckling Feed Rolls Mounted in Permanently Sealed, nti-friction Ball Bearings Precision Planetary Gearbox 7:1 Ratio MECHNICL OPTIONS Material Squaring Guides Feed Mounting Cabinet with 12 (305 mm) of Height djustment Urethane Covered Catenary Rolls for dditional Material Protection Self-Centering Edge Guides for Strip Insertion ELECTRONIC FETURES ISO Certified Electrical Components Wired to JIC, NEC & CE Standards Backlit, LCD Touchscreen Display Built-In I/O Diagnostics ssists in Troubleshooting Batch Counter Password Protected Job Storage On-The-Fly, Micro djust Feed Length Inch/Metric, Multi-Language Selectability Single Stroke or Continuous Press Mode Capability Jog Pendant Jog-To-Length Capability High Performance Digital Servo Drive nd Motor NEM 4/12/13 Enclosure Free Standing and Portable Console Stand Mushroom Emergency Stop with uxiliary Contacts for Multi-Unit Stop Lockable Power Disconnect Switch ELECTRONIC OPTIONS Integral Programmable Limit Switch for Setting Feed ngle, Cycle Reset, and Pilot Release with Digital Press Crankshaft Position Indicator SFI (Servo Feed Interface) Provides Communication with External Devices Cut-To-Length Systems vailable Sequential Feed Control Feed To Registration End of Stock Sensor Mounted to Stock Guide Table uxiliary Strip Encoder 12

13 DYNMX SERVO ROLL FEED SFE WORKING SPEEDS T VRYING LENGTHS Feed ngle at 270 Feed ngle at 180 Feed ngle at 90 TDC TDC TDC Strokes Per Minute Feed Length 75mm 150mm 225mm 300mm 375mm 450mm 525mm 600mm Performance data shown is for estimating purposes only. Production rates and capacities are dependent upon feed length and material. Consult P/ for specific application needs. DIMENSIONS 13.3 (338 mm) 2.6 (66 mm) 4.0 (102 mm) 26.8 (682 mm) 13.2 (335 mm) 7.1 (180 mm) 25.7 (653 mm) DIMENSIONS in. Model SRF SRF SRF DIMENSIONS mm Model SRF SRF SRF SPECIFICTIONS US Feed Max Full Pulling C Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRF /1/60 3 SRF /1/60 3 SRF /1/60 3 SPECIFICTIONS METRIC Feed Max Full Pulling C Model mm mm mm mm N N V/Ph/Hz kw SRF ,01 1, /1/50 3 SRF ,01 0, /1/50 3 SRF ,01 0, /1/

14 MGNUM SERVO ROLL FEED MECHNICL FETURES 1-1/2 (38 mm) Thick, Rugged Cast Iron Frame Unique Design Maintains Roll Parallelism with Off Center Loading Fail Safe Stock Clamping ssures Material Position in Die When Power is Off Two 3.15 (80 mm) Dia. Pneumatic Cylinders to Provide Roll Pressure; 3.94 (100 mm) on X Models Urethane Covered Catenary Rolls for dditional Material Protection Large Diameter, Hard Chrome Feed Rolls are Texturized for Positive Grip Pneumatic Pilot Release Precision, Low Backlash Worm Gearbox Digital Readout and Hand Wheel for ccurate Material Thickness Setting Precision Cluster Gearing of Upper Roll Exit Support Bridge to Prevent Stock Buckling Feed Mounting Bracket for 3.9 (100 mm) of Die Height djustment X Model offers a standard 30:1 Gearbox and larger cylinders for extra gripping force and extra thickness capacity MECHNICL OPTIONS Edge Squaring Guides Pull Through Straightener (See pages 18 & 19) Feed Mounting Cabinet with 12 (305 mm) of Height djustment Heavy Duty Catenary Rolls Self-Centering Edge Guides for Strip Insertion ELECTRONIC FETURES ISO Certified Electrical Components Wired to JIC, NEC, & CE Standards Backlit, LCD Touchscreen Display Built-In I/O Diagnostics ssists in Troubleshooting Batch Counter Password Protected Job Storage On-The-Fly, Micro djust Feed Length Inch/Metric, Multi-Language Selectability Single Stroke or Continuous Press Mode Capability Jog Pendant Jog-To-Length Capability High Performance Digital Servo Drive nd Motor NEM 4/12/13 Enclosure Free Standing and Portable Console Stand Mushroom Emergency Stop with uxiliary Contacts for Multi-Unit Stop Lockable Power Disconnect Switch ELECTRONIC OPTIONS Integral Programmable Limit Switch for Setting Feed ngle, Cycle Reset, and Pilot Release with Digital Press Crankshaft Position Indicator SFI (Servo Feed Interface) Provides Communication with External Devices Cut-To-Length Systems vailable Sequential Feed Control Feed To Registration End of Stock Sensor Mounted to Stock Guide Table uxiliary Strip Encoder 14

15 MGNUM SPECIFICTIONS SFE WORKING SPEEDS T VRYING LENGTHS Feed ngle at 270 Feed ngle at 180 Feed ngle at 90 TDC TDC TDC 300 Strokes Per Minute Feed Length 75mm 150mm 225mm 300mm 375mm 450mm 525mm 600mm Performance data shown is for estimating purposes only. Production rates and capacities are dependent upon feed length and material. Consult P/ for specific application needs. DIMENSIONS 17.7 (450 mm) 19.0 (483 mm) 14.2 (361 mm) 8.7 (221 mm) Pass Line Height djust. 3.9 (100 mm) B DIMENSIONS inches Model B SRF-M SRF-M SRF-M SRF-M SRF-M SRF-M DIMENSIONS mm Model B SRF-M SRF-M SRF-M SRF-M SRF-M SRF-M Note: SRFX Models have same mechanical dimensions as SRF (866 mm) SPECIFICTIONS US Feed Max Full Pulling C Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRF-M /1/60 3 SRF-M /1/60 3 SRF-M /1/60 3 SRF-M /1/60 3 SRF-M /1/60 3 SRF-M /1/60 3 SRFX-M /1/60 3 SRFX-M /1/60 3 SRFX-M /1/60 3 SRFX-M /1/60 3 SRFX-M /1/60 3 SRFX-M /1/60 3 SPECIFICTIONS METRIC Feed Max Full Pulling C Model mm mm mm mm N N V/Ph/Hz kw SRF-M ,00 5, /1/50 3 SRF-M ,00 4, /1/50 3 SRF-M ,00 4, /1/50 3 SRF-M ,00 3, /1/50 3 SRF-M ,00 3, /1/50 3 SRF-M ,00 2, /1/50 3 SRFX-M ,16 8, /1/50 3 SRFX-M ,16 7, /1/50 3 SRFX-M ,16 6, /1/50 3 SRFX-M ,16 5, /1/50 3 SRFX-M ,16 4, /1/50 3 SRFX-M ,16 3, /1/

16 MXIMUS SERVO ROLL FEED ELECTRONIC FETURES MECHNICL FETURES 1.5 (38 mm) Thick, Machined Frame Two 5 (127 mm) Diameter Pneumatic Cylinders Provide Roll Pressure Self-Centering Edge Guides for Strip Insertion Urethane Covered Catenary Rolls for dditional Material Protection 6 Inch (152 mm) Diameter, Hard Chrome Feed Rolls are Texturized for Positive Grip Precision, Low Backlash Worm Gearbox Pneumatic Pilot Release Feed Mounting Cabinet with 12 (305 mm) of Height djustment MECHNICL OPTIONS Pull Through Straightener (See pages 18 & 19) uxiliary Strip Encoder nti-backup Rolls Motorized Cabinet/Pass Line Height djustment ISO Certified Electrical Components Wired to JIC, NEC, & CE Standards Backlit, LCD Touchscreen Display Built-In I/O Diagnostics ssists in Troubleshooting Batch Counter Password Protected Job Storage On-The-Fly, Micro djust Feed Length Inch/Metric, Multi-Language Selectability Single Stroke or Continuous Press Mode Capability Jog Pendant Jog-To-Length Capability High Performance Digital Servo Drive nd Motor NEM 4/12/13 Enclosure Free Standing and Portable Console Stand Mushroom Emergency Stop with uxiliary Contacts for Multi-Unit Stop Lockable Power Disconnect Switch ELECTRONIC OPTIONS Integral Programmable Limit Switch for Setting Feed ngle, Cycle Reset, and Pilot Release with Digital Press Crankshaft Position Indicator SFI (Servo Feed Interface) Provides Communication with External Devices Cut-To-Length Systems vailable Sequential Feed Control Feed To Registration End of Stock Sensor Mounted to Stock Guide Table uxiliary Strip Encoder 16

17 MXIMUS SPECIFICTIONS SFE WORKING SPEEDS T VRYING LENGTHS Feed ngle at 270 Feed ngle at 180 Feed ngle at 90 TDC TDC TDC Strokes Per Minute Feed Length 125mm 250mm 375mm 500mm 625mm 750mm Performance data shown is for estimating purposes only. Production rates and capacities are dependent upon feed length and material. Consult P/ for specific application needs. DIMENSIONS Pass Line 12.0 (305 mm) DIMENSIONS inches B Model B SRFHD SRFHD SRFHD SRFHD SRFHD SRFHD SRFHD vailable Pass Line C 74.8 (1900 mm) 55.3 (1405 mm) C inches C meters 0,94-1,27 1,14-1,47 1,32-1,65 DIMENSIONS mm Model B SRFHD SRFHD SRFHD SRFHD SRFHD SRFHD SRFHD SPECIFICTIONS US Feed Max Full Pulling C Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRFHD /3/60 10 SRFHD /3/60 10 SRFHD /3/60 10 SRFHD /3/60 10 SRFHD /3/60 10 SRFHD /3/60 10 SRFHD /3/60 10 SPECIFICTIONS METRIC Feed Max Full Pulling C Model mm mm mm mm N N V/Ph/Hz kw SRFHD ,7 12, /3/50 10 SRFHD ,7 10, /3/50 10 SRFHD ,7 9, /3/50 10 SRFHD ,7 7, /3/50 10 SRFHD ,7 6, /3/50 10 SRFHD ,7 4, /3/50 10 SRFHD ,7 3, /3/

18 SERVO FEED w/pull-thru STRIGHTENER Magnum C Series dvantage Series This space and cost saving design utilizes a Standard P/ Feed Model integrated with a non-motorized Pull-Thru Straightener that is mounted on an adjustable height cabinet. (B,C, and D Models) DVNTGE w/ PULL-THRU Series Pass Line DIMENSIONS inches Model SRF-5S SRF-8S SRF-12S SRF-20S SRF-24S DIMENSIONS mm Model SRF-5S5 303 SRF-8S5 378 SRF-12S5 479 SRF-20S5 578 SRF-24S (818 mm) SPECIFICTIONS US Feed Straightener Full Pulling C Roll Dia. Qty. Dia. Thickness at Width Peak Cont. Input Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRF-5S /1/60 2 SRF-8S /1/60 2 SRF-12S /1/60 2 SRF-20S /1/60 2 SRF-24S /1/60 2 SPECIFICTIONS Metric Feed Straightener Full Pulling C Roll Dia. Qty. Dia. Thickness at Width Peak Cont. Input Model mm mm mm mm N N V/Ph/Hz kw SRF-5S ,1 2, /1/50 2 SRF-8S ,1 2, /1/50 2 SRF-12S ,1 1, /1/50 2 SRF-20S ,1 1, /1/50 2 SRF-24S ,1 0, /1/50 2 DVNTGE w/ PULL-THRU B Series Pass Line 23 (584 mm) 3.5 (89 mm) 46 (1168 mm) DIMENSIONS inches Model SRF-12S5B 39 SRF-20S5B 45 SRF-24S5B 45 SRF-36S5B 52 B inches DIMENSIONS m Model SRF-12S5B 0,99 SRF-20S5B 1,14 SRF-24S5B 1,14 SRF-36S5B 1,32 B m vailable Pass Line B ,10-1,40 1,20-1,50 1,40-1,70 SPECIFICTIONS US Feed Straightener Full Pulling C Roll Dia. Qty. Dia. Thickness at Width Peak Cont. Input Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRF-12S5B /1/60 2 SRF-20S5B /1/60 2 SRF-24S5B /1/60 2 SRF-36S5B /1/60 2 SPECIFICTIONS Metric Feed Straightener Full Pulling C Roll Dia. Qty. Dia. Thickness at Width Peak Cont. Input Model mm mm mm mm N N V/Ph/Hz kw SRF-12S5B ,2 2, /1/50 2 SRF-20S5B ,2 2, /1/50 2 SRF-24S5B ,2 1, /1/50 2 SRF-36S5B ,2 1, /1/

19 SERVO FEED w/pull-thru STRIGHTENER PULL-THRU OPTIONS Option Series B C D 7 Roll Option N/ Optional Optional Optional Pinch Rolls for Threading Manually N/ Optional Standard Standard Motorized Pinch Rolls for Threading N/ Optional Optional Standard Pnuematic Release of Pinch Rolls N/ Optional Standard Standard Manual Height djustment Cabinet N/ Standard Standard Standard Motorized Height djustment Cabinet N/ Optional Optional Optional MGNUM w/ PULL-THRU C Series Pass Line 8.4 (213 mm) 15 (381 mm) vailable Pass Line B 73 (1854 mm) DIMENSIONS inches Model SRFM-12S5C 40 SRFM-24S5C 46 SRFM-36S5C 56 SRFM-48S5C 69 B inches DIMENSIONS m Model SRFM-12S5C 1,02 SRFM-24S5C 1,17 SRFM-36S5C 1,42 SRFM-48S5C 1,75 B m 0,94-1,27 1,14-1,47 1,32-1,65 SPECIFICTIONS US Feed Straightener Full Pulling C Roll Dia. Qty. Dia. Thickness at Width Peak Cont. Input Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRFM-12S5C /1/60 3 SRFM-24S5C /1/60 3 SRFM-36S5C /1/60 3 SRFM-48S5C /1/60 3 SPECIFICTIONS Metric Feed Straightener Full Pulling C Roll Dia. Qty. Dia. Thickness at Width Peak Cont. Input Model mm mm mm mm N N V/Ph/Hz kw SRFM-12S5C ,2 4, /1/50 3 SRFM-24S5C ,2 3, /1/50 3 SRFM-36S5C ,2 2, /1/50 3 SRFM-48S5C ,2 1, /1/50 3 MXIMUS w/ PULL-THRU D Series (2770 mm) DIMENSIONS inches Model DIMENSIONS m Model SRFHD-612S5D 38.5 SRFHD-624S5D 50.5 SRFHD-636S5D 62.5 SRFHD-648S5D 78.5 SRFHD-612S5D 0,98 SRFHD-624S5D 1,28 SRFHD-636S5D 1,59 SRFHD-648S5D 1,99 vailable Pass Line B B inches B m 0,94-1,27 1,14-1,47 1,32-1,65 SPECIFICTIONS US Feed Straightener Full Pulling C Roll Dia. Qty. Dia. Thickness at Width Peak Cont. Input Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRFHD-612S5D /3/60 15 SRFHD-624S5D /3/60 15 SRFHD-636S5D /3/60 15 SRFHD-648S5D /3/60 15 SPECIFICTIONS Metric Feed Straightener Full Pulling C Roll Dia. Qty. Dia. Thickness at Width Peak Cont. Input Model mm mm mm mm N N V/Ph/Hz kw SRFHD-612S5D 152, ,6 2,54-9, /3/50 15 SRFHD-624S5D 152, ,6 2,54-6, /3/50 15 SRFHD-636S5D 152, ,6 2,54-5, /3/50 15 SRFHD-648S5D 152, ,6 2,54-4, /3/

20 STGGER FEED MECHNICL FETURES Utilizes the same rugged feed bodies as the Mini and dvantage Feeds Mechanical Ball Screw for Side to Side Motion Pneumatic release of Upper Roll for piloting and strip insertion Standard djustable Entry and exit guides ELECTRONIC FETURES Utilizes the same user-friendly touch-screen interface as the Edge, dvantage, Magnum and Maximus Feeds second servo motor and drive with absolute encoder to monitor side to side motion Basic operation to include touch-screen inputs for blank size, feed length, material width and number of parts per width. bility to process patterns up suit material strip Forward/Backward movement to enable faster speeds for side motion SPECIFICTIONS US Feed Max Full Pulling C Model in. in. in. in. lbs. lbs. V/Ph/Hz kw SRF-105MZZ /1/60 2 SRF-220MZZ /1/60 2 SRF-5ZZ /1/60 2 SRF-8ZZ /1/60 2 SRF-12ZZ /1/60 2 SPECIFICTIONS US Feed Max Full Pulling C Model mm mm mm mm N N V/Ph/Hz kw SRF-105MZZ 45 2,00 1, /1/50 2 SRF-220MZZ 45 2,00 1, /1/50 2 SRF-5ZZ 90 3,50 3, /1/50 2 SRF-8ZZ 90 3,50 3, /1/50 2 SRF-12ZZ 90 3,50 3, /1/

21 PROFILED PRTS FEED The profiled parts feed has special collared rolls to feed parts that have a shape or profile that would not fit in a traditional roll feed. These collars are adjustable to suit different shapes. DIMENSIONS 2.0 (51 mm) Pass Line DIMENSIONS inches Model B C D E PPF PPFX PPF B E Max. DIMENSIONS mm Model B C D E PPF ,5 PPFX ,5 PPF ,5 7.5 (191 mm) C D SPECIFICTIONS US Max. Roll Full Capacity Feed Opening Part clearance Pulling C Roll between Web between pass t Power Power Dia. collars Thickness line & shaft Width Peak Cont. Input Model in. in. in. in. (E) in. lbs. lbs. V/Ph/Hz kw PPF /1/ PPFX /1/ PPF /1/ SPECIFICTIONS Metric Max. Roll Full Capacity Feed Opening Part clearance Pulling C Roll between Web between pass t Power Power Dia. collars Thickness line & shaft Width Peak Cont. Input Model mm mm mm mm (E) mm N N V/Ph/Hz kw PPF ,52 1,52 31, /1/50 0,8 PPFX ,52 1,52 51, /1/50 0,8 PPF ,52 1,52 31, /1/50 0,8 21

22 PUSH-PULL SERVO ROLL FEED P/ s Push/Pull F eeds can be configured in any of P/ s Servo Feed Models. The control consists of tandem llen Bradley Ultra 5000 Motion controllers. The second drive follows the master drive at a programmable ratio. This ratio can be tweaked by the operator to set the amount of tension in the strip. Why a Push/Pull Feed? For Delicate pplications to VOID tension Feed No. 1 PUSHES Material into Press Press Feed No. 2 PULLS Material from Press For Delicate pplications to INDUCE tension Feed No. 1 PUSHES Material into Press Press Feed No. 2 PULLS Material from Press Die Feed No. 1 PUSHES Material into Press Wasted material at beginning of strip For MTERIL SVINGS on strip Die Wasted material at end of strip Feed No. 2 PULLS Material from Press Die Feed No. 1 PUSHES Material into Press No wasted material Feed No. 2 PULLS Material from Press 22

23 BULLET Series Every manufacturer wants to produce their product as quickly and efficiently as possible. The P/ Bullet series allows you to do just that. Using dvanced Design software, we are able to address each customer s individual needs for additional speed by using Mechanical and Electronic enhancements to our standard Servo Roll Feeds. Our Engineering Team analyzes each application to come up with the configuration that best suits each customer s needs. Whatever you produce appliances, electronic stampings, hardware, even running a high speed canning line the Bullet can make your lines run faster, and more efficiently. EXMPLE (179mm) Wide x.013 (0,32mm) Brass 1.65 (42mm) Feed Length 60 Feed Window With SRF-105P Mini 60 SPM With Bullet 140 SPM EXMPLE (0,61mm) Wide x 26 (660mm) Wide Steel (15,88mm) Feed Length 270 Feed Window With SRF-32 dvantage 540 SPM With Bullet 600 SPM EXMPLE (77mm) Wide x.060 (1,5mm) Steel 91 (2,3m) Feed Length 120 Feed Window With SRF-8 dvantage 8 SPM Strokes Per Minute Strokes Per Minute Strokes Per Minute SRF-105P SRF-32 BULLET BULLET With Bullet 25 SPM SRF-8 BULLET vailable w/servo Pilot Release for Speeds above 350 SPM. Performance data shown is for estimating purposes only. Production rates and capacities are dependent upon feed length and material. Consult P/ for specific application needs. 23

24 SEQUENTIL CONTROLS Sequential software provides the ability for step feeding, tool signaling, gagging and multiple parts on one press or punching machine. Ideal for the racking, lighting, strapping, appliance, screen perforating and other industries that make parts where changing the feed pitch during the operation is necessary. Easy step-by-step programming and job storage provide maximum flexibility and reduced set-up time. SEQUENTIL Capable of sequential, multiple length feeding Provides programmable outputs for tool and/or machine signaling Standard programs are available with up to 1000 programmable steps 2 5 programmable outputs complete with relays. Solenoids ctivated by Sequential Control Punching Stations OMNIMX RS Logix Platform Kinetix Multi-xis Servo Drive Compact Logix PLC Sequential, multiple length feeding and provides programmable outputs for tool and/or machine signaling Unlimited programmable outputs available complete with relays. Selectable multiple output capability (Gag Tooling) Inputs for Tool Verification 50 steps per tool 200 tools Pass Line TYPICL PRTS PRODUCTION Straps and Hangers djustable Shelving and Hangers Hose Clamps Perforating Filter Screens, Electronic Shielding Hole Saw Blades or Hack Saw Blades Light Fixtures and Drawer Slide Frames 24

25 OPTIONS Profiled Rolls Graphic Cut-To-Length System dj. Self-Centering Guides Squaring Guides FEED TO REGISTRTION Used when it is more important to register to a feature than a length Picture shown to the right is showing a saw blade profile. The customer requires the blade to be sheared at the root (lowest part) of the tooth. light fork sensor is used to detect that the blade is positioned to cut at the root Other features to register include marks, notches, color changes and any other feature that can be sensed electronically Feed to Registration 25

26 REFERENCE DT PRODUCTION PRTS PER HOUR (Figures Based Upon One Part Per Press Stroke) Press Speed (Strokes Per Minute) % % % Efficiency Rate 75% % % % STRIP CONSUMPTION FEET PER MINUTE Feed Length (Inches) Press Speed (Strokes Per Minute) COIL ROTTIONL SPEEDS REVOLUTIONS PER MINUTE Strip Consumption (Feet Per Minute) Coil Diameter (Inches) COIL WEIGHT REFERENCE CHRT Based on 1 Inch Strip Width Steel. Factor From Chart x Width of Coil = Total Coil Weight. To Obtain Weight of: luminum Multiply Total Wt. x.344 Brass Multiply Total Wt. x 1.08 Copper Multiply Total Wt. x 1.14 Stainless Steel Multiply Total Wt. x 1.02 Inside Diameter Outside Diameter FREE LOOP RE & SLCK MTERIL VILBILITY FOR MILD STEEL COIL STOCK H R Free Loop Length, L R Loop Pit R R = Radius desirable to avoid distortion of material in free loop calculated at approximately 360 times metal thickness. Loop Pit can provide 2 inches of additional slack material for each inch of depth; once H is equal to at least two times R. Chart below shows inches of loop required for a given thickness & inches of slack material in a full loop. Material Free Loop Pass Line Height H (Inch) Thickness Length T (Inch) L (Inch) ccumulated Slack

27 P/ OFFERS COMPLETE LINE OF PRESS FEEDING ND COIL HNDLING EQUIPMENT YOU SUPPLY THE PRESS... WE LL SUPPLY THE REST. PYOFF REELS Palletizer Light Duty Stock Reel Medium Duty Dual Stock Reel Heavy Duty Reel STRIGHTENERS Flip Top Straightener Medium Duty Straightener Heavy Duty Straightener Magnum Straightener SENSORS Loop Control UltraSonic System RF System FEEDS Micro Feed Precision ir Feed Mini Servo Feed Ultra Magnum Servo Feed OILERS SO-100 SO-300 SO-600 CUTTERS Scrap Chopper ir Scrap Chopper Pneumatic Scrap Chopper TRNSPORTERS TP-3 TP-10 TP-40 TP-140 ETP-25 WINDERS Rewind Reel utomatic Rewind Equipment utomatic Horizontal System Traverse Layer Winder COMPLETE SYSTEMS Wire Feed Line utomatic Threading Laminating Line 27

28 ir Feeds Straighteners Shears Transporters Wire Feeds Coil Handling Equipment P/ PLEDGE: P.O.M.G. Peace of Mind WRRNTY We warrant our mechanical parts against defects under normal use and service for a period of 1 year after date of shipment. We warrant all components installed, but not manufactured by P/, for 1 year after date of shipment. Our obligation under this warranty is limited to replacing or repairing (at our option) the defective part without charge, F.O.B. our plant in Bloomfield, Connecticut. The defective part must be forwarded to our plant, freight-prepaid, for our inspection prior to replacement or repair. EXCEPT S EXPRESSLY PROVIDED HEREIN, THIS WRRNTY IS IN LIEU OF LL OTHER WRRNTIES, EXPRESS OR IMPLIED, INCLUDING WRRNTY OF MERCHNTBILITY OR FITNESS FOR PRTICULR PURPOSE. WRNING! This equipment offers various means of operating metal forming machines, delivers material or parts to the machine, or removes material, parts, or scrap from the machine. The operator s hands must NOT be in or near the point-of-operation of the machine, or the operating parts of any equipment installed on the machine, or bodily injury could result. The EMPLOYER must post adequate warning signs on the press with proper warnings for his machine and the specific application to which the machine and equipment are being applied. If the EMPLOYER requires help in preparing wording for his application after he has determined the details of that application, he is invited to contact P/ Industries for such help. The EMPLOYER must meet all OSH regulations including, but not limited to, , , , and all applicable state laws. ll equipment manufactured by P/ Industries is designed to meet the construction standards of OSH in effect at the time of sale, but the EMPLOYER installs the equipment, and therefore the EMPLOYER is responsible for installation, use, application, training, and maintenance, as well as adequate signs on the press or other machine onto which this equipment will be installed. ll P/ products are sold for use only in accordance with our installation and operating instructions which accompany the products. P/ accepts no responsibility for any use or application not in accordance with our instructions, or for any modification or alteration of the product. ccident-free press operation will result from a well developed, management-sponsored and enforced press safety program. P/ Industries is not responsible for notifying the user of this equipment of further changes in State or Federal laws, construction standards, or changes in P/ designed and built products. P/ Industries Inc. P/ Technology Park 522 Cottage Grove Road Bloomfield, CT US Telephone: Worldwide: Fax: sales@pa.com FORM Since 1953