Fluid Coolers Induced Draft

Transcription

1 Fluid Coolers Induced Draft PRODUCT CATALOGUE 2013 AUSTRALIAN MADE

2 2 Disclaimer The information or advice contained in this catalogue is intended for use only by persons who have had adequate technical training in the field to which the catalogue relates. The information in this catalogue is a guide only and not to be used for construction. The user should also establish the applicability of the information or advice in relation to any specific circumstances. While the information or advice is believed to be correct the employees and agents disclaim responsibility for any inaccuracies contained within the document including those due to any negligence in the preparation and publication of the catalogue.

3 3 Contents Disclaimer Contents Nomenclature Company Profile Fluid Coolers Induced Draft Components Engineering Design Layout Access and Maintenance Sound Levels Lifting Techniques Plinth Arrangements Variable Speed Drives Freight Site Assembly Compliance with the Standards Modular Design Notes Quick Selection Data Features Engineering Data Sound Data Line Drawing

4 4 Nomenclature (Model Number Legend) ctcf f 215 a ln 1. Open Cooling Towers CTCF - Cooling Tower Counter Flow CTDF - Cooling Tower Dual Flow CFSF - Cooling Tower Single Flow CTFD - Cooling Tower Forced Draft Evaporative Condensers ECCF - Evaporative Condenser Counter Flow ECFD - Evaporative Condenser Forced Draft Industrial Fluid Coolers IFCCF - Industrial Fluid Cooler Counter Flow IFCFD - Industrial Fluid Cooler Forced Draft 2. Material of Construction F - Fibreglass M - Metal Mild Steel SS - Stainless Steel 3. Cooling Towers Kilowatts Total Heat Rejection with conditions 35/ 29.5/ 24 Deg. Celcius divided by 10 Evaporative Condensers Kilowatts Total Heat Rejection with conditions 40.5 Deg. Celcius, 24 Deg. Celcius Wet Bulb divided by 10. For R22 and R134A Industrial Fluid Coolers Kilowatts Total Heat Rejection with conditions 35/ 29.5/ 24 Deg. Celcius divided by Series Fan Type S - Standard LN - Low Noise

5 5 AUSTRALIAN MADE FIBREFLOW COOLING TOWERS Company Profile Fibreflow Cooling Towers is wholly Australian owned and made. Fibreflow Cooling Towers was established in response to the demand for a quality HVAC manufacturer in Australia and develop and design composite products to related manufacturing methods. Various production methods include cold pressing heavy section FRP mouldings and forming hollow and complex one piece FRP sections. Our production methods use the best isophthalic, vinyl ester resins, gelcoats and high quality reinforcements. Our products are developed to stand the test of time with the quality, lifecycle and performance that goes above and beyond the expectations of our customers. With a combined experience of over 50 years in the industry, we have formed an insight as to what is required of our products, thus meeting the market with the best solutions for the application. Typical applications include cooling tower structures and components, support assemblies, motor mounts and bearing housing mounts in a variety of materials to suit the clients requirements. Our range of FRP Process Cooling equipment are developed and manufactured right here in Australia. With benefits ranging from the low cost of ownership to long service life, high quality materials and virtually no maintenance, we can provide a tailored solution for your application.

6 6 Fluid COOLERS Induced Draft

7 7 Fluid Coolers Quick Selection - Induced Draft - IFCCF Model DEG C hot water cold water wet bulb BOX SIZE model: ifc WATER FLOW - LITRES PER SECOND x x x x x x x x x x x x x x x x x x x x x x x x x x x x NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

8 8 Fluid Coolers Quick Selection - Induced Draft - IFCCF Model DEG C hot water cold water wet bulb BOX SIZE model: ifccf WATER FLOW - LITRES PER SECOND x x x x x x x x x x x x x x x x x x x x x NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

9 9 Fluid Coolers NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

10 10 Fluid Coolers Fluid Coolers Induced Draft 1 Motor and Drives a) High Efficiency MEPS 2 Standard IP66 TEF b) Power Band Drive System c) Cast Iron or Aluminium Pulleys SPB Minimum d) Heavy Duty Bearings 2 Fan a) High Efficiency b) Low Noise c) Aluminium/GRP/FRP Construction d) Anti Corrosive 3 Spray System a) High Pressure PVC Pipe b) ABS Anti Clog Distribution Nozzles 4 Casing a) Stainless Steel, Mild Steel or Fibreglass b) Isophthalic Polyesther Based Resins & Gelcoats c) High Quality Chemical and Corrosion resistant d) High Strength e) UV Resistant Flow Coat 5 Access Door a) High Strength, Lightweight Fibreglass b) Easily Removable 6 Hardware a) 304 Stainless Steel Minimum 7 Coil a) High Quality Copper/ Steel b) Stainless Steel Frame c) Pressure tested to 3000 KPA 8 Louvres a) Rigid PVC Anti splash Louvres b) Stainless Steel or PVC frames c) Easy to Maintain d) Easy to Remove and Self Retaining NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

11 11 Fluid Coolers Fluid Coolers Induced Draft NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

12 12 Fluid Coolers Engineering Data - Induced Draft - IFCCF Model COPPER COIL STEEL COIL Model BOX SIZE Length L Width W Height h Fan DiametER Motor Size Full Load CURRENT Air flow PUMP MOTOR Shipping Weight OPERATING Weight Shipping Weight OPERATING Weight IFCCF mm mm mm mm kw Amps L /sec KW kg kg kg kg x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

13 13 Fluid Coolers Engineering Data - Induced Draft - IFCCF Model COPPER COIL STEEL COIL Model BOX SIZE Length L Width W Height h Fan DiametER Motor Size Full Load CURRENT Air flow PUMP MOTOR Shipping Weight OPERATING Weight Shipping Weight OPERATING Weight IFCCF mm mm mm mm kw Amps L /sec KW kg kg kg kg x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

14 14 Fluid Coolers Sound Data - Induced Draft - IFCCF Model (Note: + / - 2 dba. Variable speed drives increase the noise from cooling towers) Model BOX Size MOTOR SIZE sound power levels db RE 10¹² Watt sound PRESSURE levels FAN AT 1.5M SPL in db RE microbar Sound Pressure levels fan at 15m SPL in db RE microbar IFCCF KW db(a) db(a) db(a) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

15 15 Fluid Coolers Sound Data - Induced Draft - IFCCF Model (Note: + / - 2 dba. Variable speed drives increase the noise from cooling towers) Model BOX Size MOTOR SIZE sound power levels db RE 10¹² Watt sound PRESSURE levels FAN AT 1.5M SPL in db RE microbar Sound Pressure levels fan at 15m SPL in db RE microbar IFCCF KW db(a) db(a) db(a) x x x x x x x x 18 2 x x 18 2 x x 18 2 x x x x x 18 2 x x 18 2 x x 18 2 x NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

16 16 Fluid Coolers NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

17 17 Fluid Coolers NOTE: Do not use for construction. Refer to your sales representative for certified weights & dimensions. Data subject to change for product improvement.

18 18 COMPONENTS AUSTRALIAN MADE components Fibreflow Components Include: PVC Fill Eliminators Inlet Louvres Centrifugal Fan Wheel Fan Housings Fan Shafts Fan Bearings Nozzles Float Valves Pultruded Components Axial Fans FRP Fan Stacks FRP Hot Water Basins Gearbox assemblies including new or rebuilds Pulleys and Belts Access ladders & Platforms Guard Rails Replacement Coils Custom Designs Engineering and Design Repair and Overhaul of Fans Balancing Facilities including Static and Dynamic Onsite vibration analysis and balancing Pattern and Mould making Facilities Manufacture of FRP Components using hand lay, Press Moulding and Vacuum Moulding Techniques Manufacture of Fan Housings and Fan Stacks High Performance Laminates in e-glass or Carbon Reinforcements

19 19 ENGINEERING DESIGN LAYOUT Air Flow When considering installation the unit must have suitable fresh air available to ensure correct operation of the system. Care must be taken to ensure moist air does reticulate back into the air inlets and due consideration must be given to ensuring discharge air does not flow into separate fresh air intake for building air-conditioning systems. Consult local regulations for details. Multiple Cells When using or combining multiple cells as a single component cooling source, equalizer lines must be installed to ensure balanced operation. Units must be mounted on the same level on secure plinths. Pipe Work Valves should be installed on all pipe connections and the correct pipe sizes must be used to ensure correct operation. Pipe work and other components to the system should be installed in a manner that ensures the system water does not flow into the cooling tower causing overflow and water loss on shut down. On start up the water level would drop considerably causing air to be introduced into the system. Preferably such pipe work and components should be located under the level of the basin operating level. Pipe work and ducting cannot be supported from the tower structure. De-Rating If installing cells hard against each other then a de-rating must be applied - generally around 5%. Consult Fibreflow Cooling Towers for confirmation. Placement When installing in plant rooms and applying ductwork and restricted air supply the external static pressure will increase. Motor size will need to be increased to overcome additional load - consult factory for advice. Layout Clearances Refer to engineering for layout clearances. Rule of thumb, 1500mm all around minimum.

20 20 ACCESS AND MAINTENANCE Health and Safety Fibreflow Cooling Towers adhears to local government regulations and Australian Standards. Working Platforms Fibreflow Cooling Towers offers a full range of working platforms with access ladders, low level and high level, multiple cell platforms and movable working platforms. All platforms conform to the Australian Standard AS1657. Configuration Standard configurations are available as shown, as well as custom-made to suit a specific location. Materials Material including hot dipped galvanized steel, aluminium, stainless steel and fibreglass. Crane Mounting Davit cranes mounted on platforms for motor removal are also available as shown.

21 21 SOUND LEVELS Noise The noise that humans can hear covers a frequency from 20Hz to 10,000Hz. There are exceptions, however these levels have become accepted for most practical purposes. This audio band has been divided into eight bands called octave bands. The noise of cooling towers is controlled by many contributing factors such as layout, adjacent structures, variable speed drives, etc. Low noise options are available please consult your representative for further assistance. Sickle Fan The Sickle axial fan series are the answer for generating pressure with low noise axial fans. The sickle blade s swept design and thin trailing edge reduce pure tones in the sound spectrum and decrease vortex shedding to generate low wake turbulence for a quieter axial fan. The sickle profile s large chord length and overall surface area also combine to generate greater pressure at slower speeds. The sickle axial fans are Fibreflows natural choice for applications where low noise capabilities are a much required first priority. Reduces noise by up to 7 db(a) Maintains performance at lower speeds Sickle Blade Large chord length generates greater pressure

22 22 LIFTING TECHNIQUES Lifting Lifting Cooling Towers incorrectly can cause the unit to buckle. Please take the following precautions when installing your towers or alternatively, have Fibreflow take care of installation for you. Use soft slings only Beware of possible crushing of the Tower Casing when Lifting Use only Tested and Tagged Lifting Gear Licensed Crane Operators Always insure there is an exclusion zone whilst lifting is underway Cooling Tower Being Lifted Refer to our factory for further information. Cooling Tower About to be Lifted

23 23 PLINTH ARRANGEMENTS Plinth arrangements are done based on the size and weight of the cooling tower. Please refer to our factory or your representative for further information.

24 24 VARIABLE SPEED DRIVES Variable Speed Drive Cooling Tower Fans Cooling towers are used in conjunction with water cooled chillers which are highly efficient. The tower fans cool the water with ambient temperature air. Drives replace two speed motors to regulate the condenser water temperature. During light loads or cool days, the cooling tower has too high of a capacity. The drive regulates the fans speed to maintain the set point to optimise the energy consumption. A temperature sensor is placed in the condenser water return line or in the cooling tower basin. A minimum speed of 15% is needed on gear driven fans to maintain proper gear lubrication. System Advantages Substantial Energy Savings No Air Surge/ Water Hammer on Start-up Redused Noise Wider Operating Range Cooling Tower Fans Sensor Placement Fibreflow Cooling Towers recommends the use of VSD s on all installations to conserve energy, and reduce wear on mechanical components.

25 25 FREIGHT Freight Depending on transport requirements, box sizes up to 3850 x 1450 are generally shipped assembled, unless otherwise specified x 2400 units are shipped in two sections for final assembly on site, alternatively these are supplied in complete knock down format (CKD) All other units are shipped in CKD format to reduce transport and handling costs. Cooling Tower Components Packed for Shipping Fiberflow has a fleet of trucks to deliver your Cooling Tower to any destination around Australia and can also ship to anywhere in the world. Cooling Tower Components Packed for Shipping

26 26 SITE ASSEMBLY Site Assembly Fibreflow Cooling Towers offer a complete onsite assembly service to ensure that the products are assembled in the correct manner. They can be assembled quickly and safely onsite or offsite depending on your needs. Fiberflow can work well with many companies/ contractors to ensure that the assembly is completed smoothly whilst onsite. It is not compulsory that Fibreflow Cooling Towers or its authorised representatives assemble the units however it is preferred. Cooling Tower Being Assembled CKD units can be purchased with assembly instructions for those wishing to assemble themselves. Cooling Tower Being Assembled

27 27 COMPLIANCE WITH THE STANDARDS Compliance with Standards Fibreflow Cooling Towers are designed and constructed to meet the following Standards: AS Air Handling and Water Systems of Buildings Microbial Control AS Drift Test AS Wind Loads AS Code for platforms, ladders, stairways and walkways AS Australian Plumbing Code CTI STD PVC materials for use with fill, louvres and drift eliminators BCA - Building Code of Australia MEPS - Electric Motor Standard Compliance Performance Guaranteed Fibreflow Cooling Towers guarantee the THERMAL PERFORMANCE of our cooling towers The performance evaluation is taken as per CTI Test Code ATC 105 The thermal performance guaranteed is that submitted in the technical data on which the purchase order was based in free field conditions unless otherwise stated

28 28 MODULAR DESIGN Modular Design Fibreflow Cooling Towers can be assembled on site. Dedicated professional team of tradesman to assemble on site Hard to get into plantrooms, no issues. Towers are manufactured modular for that exact reason. No issues with wide load movement No issues with rain delays or road works Assured quality construction if assembled on site with no transport issues Over 30 years of on site construction experience Safety is main priority No location too remote

29 29 NOTES

30 South east asia papua new guinea Australia pacific islands NEW ZEALAND HEAD OFFICE PO BOX 219 6/ 36 Blanck St Ormeau 4208 QLD Australia Phone: Fax: Mobile: Web: MANUFACTURING PLANT 2/ 4 Cumberland Avenue South Nowra 2541 NSW Australia Phone: (02) Fax: Web: factory@ctms.net.au pvc fill MANUFACTURING facility PO BOX 219 2/ 36 Blanck St Ormeau 4208 QLD Australia Phone: Fax: Web: info@fct.net.au Efficiency and Safety in Design Contact your Local Representative AUSTRALIAN MADE