Product Data Sheet. Recordall Disc Meters. Lead-Free Bronze Alloy, Sizes 5/8", 5/8" x 3/4", 3/4" & 1" NSF/ANSI Standards 61 and 372 Certified
|
|
- Magdalen Daniel
- 6 years ago
- Views:
Transcription
1 Recordall Disc Meters LeadFree Bronze Alloy, Sizes /8", /8" x 3/4", 3/4" & " NSF/ANSI Standards 6 and 372 Certified LP /8", /8" 3/4" 2 /8", /8" 3/4" 3 3/4" " 7 " DESCRIPTION The Recordall Disc Series meters meet or exceed the most recent revision of AWWA Standard C7 and are available in a leadfree bronze alloy. The meters comply with the leadfree provisions of the Safe Drinking Water Act, are certified to NSF/ANSI Standards 6 and 372 (Trade Designations: MLPLL, M2LL, M3LL, MLL, M7LL) and carry the NSF6 mark on the housing. All components of the leadfree bronze alloy meter (housing, measuring element, seals, and so on) comprise the certified system. Applications: For use in measurement of potable cold water in residential, commercial and industrial services where flow is in one direction only. Operation: Water flows through the meter s strainer and into the measuring chamber where it causes the disc to nutate. The disc, which moves freely, nutates on its own ball, guided by a thrust roller. A drive magnet transmits the motion of the disc to a follower magnet located within the permanently sealed register. The follower magnet is connected to the register gear train. The gear train reduces the disc nutations into volume totalization units displayed on the register or encoder face. Operating Performance: The Recordall Disc Series meters meet or exceed registration accuracy for the low flow rates (9%), normal operating flow rates ( ±.%), and maximum continuous operation flow rates as specifically stated in AWWA Standard C7. Construction: Recordall Disc meter construction, which complies with ANSI/AWWA standard C7, consists of three basic components: meter housing, measuring chamber and permanently sealed register or encoder. The meter is available in a leadfree bronze alloy with externallythreaded spuds. A corrosionresistant engineered polymer material is used for the measuring chamber. Magnetic Drive: Direct magnetic drive, through the use of highstrength magnets, provides positive, reliable and dependable register coupling for straightreading or AMR/AMI meter reading options. TamperProof Features: Unauthorized removal of the register or encoder is inhibited by the option of a tamper detection seal wire screw, TORX tamperresistant seal screw or the proprietary tamperresistant keyed seal screw. Each can be installed at the meter site or at the factory. Maintenance: Badger Meter Recordall Disc Series meters are designed and manufactured to provide longterm service with minimal maintenance. When maintenance is required, it can be performed easily either at the meter installation or at any other convenient location. To simplify maintenance, the register, measuring chamber, and strainer can be replaced without removing the meter housing from the installation. No change gears are required for accuracy calibration. Interchangeability of parts among likesized meters and meter models also minimizes spare parts inventory investment. The builtin strainer has an effective straining area of twice the inlet size. Connections: Tailpieces/Unions for installations of meters on various pipe types and sizes, including misaligned pipes, are available as an option. Meter Spud and Connection Sizes LP 2 3 L Size Designation Laying Length B Bore Dia. Coupling Nut and Spud Thread Tailpiece Pipe Thread (NPT) /8" 7/2" /8" 3/4" (/8") /2" /8" x 3/4" 7/2" /8", 3/4" " (3/4") 3/4" /8" 7/2" /8" 3/4" (/8") /2" /8" x 3/4" 7/2" /8", 3/4" " (3/4") 3/4" 3/4" 7/2" 3/4" " (3/4") 3/4" 3/4" 9" 3/4" " (3/4") 3/4" 3/4" x " 9" 3/4" /4" (") " " 3/4" " /4" (") " 7 " 3/4" " /4" (") " RDMDS464EN3 AWWA (October 2) Product Data Sheet
2 Recordall Disc Meters, LeadFree Bronze Alloy, Sizes /8", /8" x 3/4", 3/4" & " SPECIFICATIONS Typical Operating Range (% ±.%) Low Flow Maximum Continuous Operation at Maximum Continuous Operation Maximum Operating Temperature Maximum Operating Pressure Measuring Element Meter Connections LP (/8" & /8" 3/4"). 2 gpm (. 4. m 3 /hr).2 gpm (.7 m 3 /hr) Min. 9% gpm (2.3 m 3 /hr) /8" size: 2 gpm ( m 3 /hr) /8" 3/4" size:. gpm (. 2.3 m 3 /hr) 2 (/8" & /8" 3/4"). 2 gpm (..7 m 3 /hr).2 gpm (.7 m 3 /hr) Min. 98.% gpm (3.4 m 3 /hr) /8" size: 3. gpm ( m 3 /hr) /8" 3/4" size: 2.8 gpm ( m 3 /hr) 3 (3/4").7 3 gpm ( m 3 /hr).37 gpm (.8 m 3 /hr) Min. 97% 2 gpm (.7 m 3 /hr) 2 gpm (.37 m 3 /hr) 8 F (26 C) psi ( bar) Nutating disc, positive displacement Available in NL bronze and engineered polymer to fit spud thread bore diameter sizes: /8" or 3/4" (DN mm) /8" size: /8" (DN mm) /8" 3/4" size: 3/4" (DN mm) (") gpm ( m 3 /hr). gpm (. m 3 /hr) Min. 9% 4 gpm (9. m 3 /hr) gpm ( m 3 /hr) 7 (").2 7 gpm (.28 6 m 3 /hr).7 gpm (.7 m 3 /hr) Min. 9% gpm (.3 m 3 /hr) 6. gpm (.4 m 3 /hr) 3/4" (DN 2 mm) " (DN 2 mm) " (DN 2 mm) MATERIALS Meter Housing Housing Bottom Plates Measuring Chamber Disc Trim Strainer LP (/8" & /8" 3/4") 2 (/8" & /8" 3/4") Leadfree bronze alloy, cast iron, engineered polymer 3 (3/4") Leadfree bronze alloy Engineered polymer Engineered polymer Stainless steel Engineered polymer (") Cast iron, leadfree bronze alloy 7 (") Disc Spindle Engineered polymer Stainless steel Stainless steel Engineered polymer Stainless steel Magnet Ceramic Ceramic Ceramic Polymer bonded Ceramic Magnet Spindle Engineered polymer Stainless steel Stainless steel Engineered polymer Stainless steel Lid and Shroud Engineered polymer, bronze Page 2 RDMDS464EN3 AWWA October 2
3 Product Data Sheet DIMENSIONS Meter Size A Laying Length B Height Reg. C Centerline Base Width Approx. Shipping Weight /8 and /8 3/4 ( mm) LP 7/2" (9 mm) 3.7" (94 mm).26" (32 mm) 3.7" (9 mm) 3 lb (.4 kg) /8" ( mm) 7/2" (9 mm) 4/6" (2 mm) /6" (42 mm) 4/4" (8 mm) 4/2 lb (2 kg) 2 /8" 3/4" ( mm) 7/2" (9 mm) 4/6" (2 mm) /6" (42 mm) 4/4" (8 mm) 4/2 lb (2 kg) 3/4" (2 mm) 7/2" (9 mm) /4" (33 mm) /8" (4 mm) " (27 mm) /2 lb (2. kg) 3/4" (2 mm) 3 9" (229 mm) /4" (33 mm) /8" (4 mm) " (27 mm) 3/4 lb (2.6 kg) 3/4" " (2 mm) 9" (229 mm) /4" (33 mm) /8" (4 mm) " (27 mm) 6 lb (2.7 kg) " (2 mm) 3/4" (273 mm) 6" (2 mm) 2/32" (2 mm) 6/4" (9 mm) 83/4 lb (3.9 kg) " (2 mm) 7 3/4" (273 mm) 6/2" (6 mm) 2/6" (9 mm) 73/4" (97 mm) /2 lb (.2 kg) REGISTERS / ENCODERS Standard SweepHand Registration The standard register is a straightreading, permanently sealed magnetic drive register. Dirt, moisture, tampering and lens fogging problems are eliminated. The register has a sixodometer wheel totalization display, 36 test circle with center sweep hand, and flow finder to detect leaks. gearing is made of selflubricating engineered polymer, which minimizes friction and provides long life. The multiposition register simplifies meter installation and reading. The register capacity is,, gallons (,, ft 3,, m 3 ). A 2 register is used in the following example: Recordall /8" 7 Gallons 6 Badger Meter Recordall Cubic Feet. Badger Meter /8" ,9 2 Recordall /7 m, /8", 3/4",7,,,6,4,,2 Badger Meter m3,3 Gallon Cubic Feet Cubic Meter LP. 2 (/8")./. 2 (/8" 3/4")./ Optional Encoders for AMR/AMI Reading Solutions AMR/AMI solutions are available for all Recordall Disc Series meters. All reading options can be removed from the meter without disrupting water service. Badger Meter encoders provide years of reliable, accurate readings for a variety of applications and are also available prewired to Badger Meter approved AMR/AMI solutions. See details at October 2 RDMDS464EN3 AWWA Page 3
4 Recordall Disc Meters, LeadFree Bronze Alloy, Sizes /8", /8" x 3/4", 3/4" & " PRESSURE LOSS CHARTS Rate of Flow in Gallons per Minute 2 LP /8" LP /8" 3/4" /8" Page 4 RDMDS464EN3 AWWA October 2
5 Product Data Sheet PRESSURE LOSS CHARTS (CONTINUED) Rate of Flow in Gallons per Minute 2 /8" 3/4" /4" " October 2 RDMDS464EN3 AWWA Page
6 Recordall Disc Meters, LeadFree Bronze Alloy, Sizes /8", /8" x 3/4", 3/4" & " PRESSURE LOSS CHARTS (CONTINUED) Rate of Flow in Gallons per Minute 2 7 " ACCURACY CHARTS LP /8" LP /8" 3/4" Page 6 RDMDS464EN3 AWWA October 2
7 Product Data Sheet ACCURACY CHARTS (CONTINUED) 2 /8" /8" 3/4" /4" October 2 RDMDS464EN3 AWWA Page 7
8 Recordall Disc Meters, LeadFree Bronze Alloy, Sizes /8", /8" x 3/4", 3/4" & " ACCURACY CHARTS (CONTINUED) " Accuracy Per Cent _ 7 " Making Water Visible MAKING WATER VISIBLE and RECORDALL are registered trademarks of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists. 2 Badger Meter, Inc. All rights reserved. The Americas Badger Meter 44 West Brown Deer Rd PO Box 2436 Milwaukee, WI México Badger Meter de las Americas, S.A. de C.V. Pedro Luis Ogazón N 32 Esq. Angelina N 24 Colonia Guadalupe Inn CP México, DF México Europe, Middle East and Africa Badger Meter Europa GmbH Nurtinger Str Neuffen Germany Europe, Middle East Branch Office Badger Meter Europe PO Box Dubai Silicon Oasis, Head Quarter Building, Wing C, Office #C29 Dubai / UAE Czech Republic Badger Meter Czech Republic s.r.o. Maříkova 282/26 62 Brno, Czech Republic Slovakia Badger Meter Slovakia s.r.o. Racianska 9/B 83 2 Bratislava, Slovakia Asia Pacific Badger Meter 8 Marine Parade Rd 26 Parkway Parade Singapore China Badger Meter Hangzhong Road Minhang District Shanghai China Legacy Document Numbers: RDMDS62, 63, 64, 6, 66, and 73
Product Data Sheet. Recordall Disc Meters. Lead-Free Bronze Alloy, Sizes 5/8, 5/8 x 3/4, 3/4 & 1 inch NSF/ANSI Standards 61 and 372 Certified
Recordall Disc Meters LeadFree Bronze Alloy, Sizes /8, /8 x 3/4, 3/4 & inch NSF/ANSI Standards 6 and 372 Certified 2 /8 in., /8 3/4 in. 3 3/4 in. in. 7 in. DESCRIPTION The Recordall Disc Series meters
More informationProduct Data Sheet DESCRIPTION
Turbo Series Meters Models 16 (11/2"), 2 (2"), 4 (3"), (4"), 2 (6"), 3 (8"), ("), & 62 (12"); NSF/ANSI Standards 61 and 372 Certified DESCRIPTION Turbo Series meters meet or exceed the most recent revision
More informationProduct Data Sheet DESCRIPTION
Turbo Series Meters Models 16 (11/), 2 (), 4 (3 in.), (4 in.), 2 (6 in.), 3 (8 in.), ( in.) and 62 (1) NSF/ANSI Standards 61 and 372 Certified DESCRIPTION Turbo Series meters meet or exceed the most recent
More informationProduct Data Sheet. Recordall Fire Series Assemblies (FSAA) Cold Water Meter & Strainer with Disc Bypass DESCRIPTION
Fire Series Assemblies (FSAA) Cold Water Meter & Strainer with Disc Bypass UL Certified & FM Standard Approved for Fire Service Applications NSF/ANSI Standards and Certified DESCIPTION Fire Series assemblies
More informationParts List. Recordall Turbo Series Meters
Recordall Turbo Series Meters Models 160 (1-1/ in.), 00 ( in.), 450 (3 in.), 1000 (4 in.), 000 (6 in.), 3500 (8 in.), 5500 (10 in.), 600 (1 in.) Models without Integral Strainers, Sizes 1-1/ 1 in. Models
More informationProduct Data Sheet. Recordall Fire Series Assembly (FSAA) Cold Water Meter & Strainer with Turbine Bypass DESCRIPTION
Fire Series Assembly (FSAA) Cold Water Meter & Strainer with Turbine Bypass UL Certified & FM Standard Approved for Fire Service Applications NSF/ANSI Standards and Certified DESCIPTION Fire Series assemblies
More informationProduct Data Sheet. Industrial Oval Gear. Inline and Flanged Meters, 1/2", 3/4", 1", 1" HF, 1-1/2", 2", 3" DESCRIPTION OPERATING PRINCIPLE
Industrial Oval Gear Inline and Flanged Meters, 1/2", 3/4", 1", 1" HF, 1-1/2", 2", 3" DESCRIPTION The Badger Meter Industrial Oval Gear Meter, Model IOG is a modular flow meter design, economical yet highly
More informationProduct Data Sheet. Turbine Flow Meter. QuikSert DESCRIPTION INSTALLATION FEATURES REPAIR KITS
DESCRIPTION Turbine Flow Meter QuikSert The QuikSert in-line turbine flow meter was developed for liquid applications where accuracy and dependability are needed. QuikSert s stainless steel body incorporates
More informationAutomotive Flow Measurement and Control Products
Automotive Flow Measurement and Control Products Control. Manage. Optimize. Automotive Flow Measurement and Control Products When every drop counts, choose automotive flow measurement and control products
More informationVariable Area Flow Meters and Flow Switches. Easy-to-Use and Reliable Flow Measurement.
Variable Area and Flow Switches Easy-to-Use and Reliable Flow Measurement. Variable Area and Flow Switches The Hedland product line features over 15,000 inline, variable area flow meters to measure oil,
More informationProduct Data Sheet. Flow Sensors. Insert Style Flow Sensors SDI Series DESCRIPTION HOT TAP SENSORS (OPTIONAL) APPLICATIONS FUNCTIONALITY
DESCRIPTION Flow Sensors Insert Style Flow Sensors SDI Series The Data Industrial SDI Series insert flow sensors from Badger Meter offer accurate liquid flow measurement in closed pipe systems in an easy
More informationControl Valves. Type HP-10, 10,000 PSI. User Manual. RCV-UM EN-01 (August 2014)
Control Valves Type HP-10, 10,000 PSI RCV-UM-01034-EN-01 () User Manual Control Valves Type HP-10, 10,000 PSI Page ii User Manual CONTENTS Overview...........................................................................
More informationRecordall Combo Meter Lead-Free Bronze Alloy, Size 8" (DN 200) NSF/ANSI Standards 61 and 372 Certified RCO-UM EN-02 (October 2013) User Manual
Recordall Combo Meter Lead-Free Bronze Alloy, Size 8" (DN 200) NSF/ANSI Standards 61 and 372 Certified RCO-UM-00077-EN-02 (October 2013) User Manual Recordall Combo Meter, 8" Page ii October 2013 User
More informationApplication Data Sheet. Chemical Compatibility Chart. IND-AS EN-01 (May, 2014) Metals Plastics Seals KEY. Good. Fair. Ethylene Propylene.
Chemical Compatibility Chart 6 Stainless Acetic Acid Acetone Acetylene Acidic Mine Water Acrylonitrile Ammonium Chloride Ammonium Hydroxide Ammonium Sulfate Ammonium Thio-Sulfate Anhydrous Ammonia Anhydrous
More informationUser Manual. Industrial Meters. Oscillating Piston, Sizes 1/2", 1" and 2" Model OP Sanitary (3A Approved) and Model OP Chemical
Industrial Meters Oscillating Piston, Sizes 1/2", 1" and 2" Model OP Sanitary (3A Approved) and Model OP Chemical OPM-DS-00291-EN-03 () User Manual Industrial Meters, Oscillating Piston, Sizes 1/2", 1"
More informationTurbine Flow Meter. Model User Manual. TRB-UM EN-03 (December 2015)
Turbine Flow Meter Model 1200 TRB-UM-00290-EN-03 () User Manual Turbine Flow Meter, Model 1200 CONTENTS Scope of This Manual 3 Unpacking and Inspection 3 Safety 3 Terminology and Symbols 3 Considerations
More informationProduct Data Sheet. VN2000 Flow Meters. Compact Insertion Meter DESCRIPTION BENEFITS APPLICATIONS INSTALLATION
VN2000 Flow Meters Compact Insertion Meter DESCRIPTION The VN2000 Compact Insertion Vortex Flow Meter measures the volumetric or mass flow rate or BTU/energy of steam, gas or liquids over a large flow
More informationUser Manual. Ellipse Pitot Tube Meter. PFA Fire Pump System. PTT-UM EN-03 (March 2017) 2500 GPM 3000 F M
Ellipse Pitot Tube Meter PFA Fire Pump System 500 GPM 3000 000 3500 1500 1000 PFA-XXX X inch 50 SWP X/XX S/N AXXXXXXX 4000 METERS PTT-UM-0053-EN-03 () User Manual Ellipse Pitot Tube Meter, PFA Fire Pump
More informationProduct Data Sheet. VN2000 Flow Meters. Wafer Plate Inline Meter DESCRIPTION BENEFITS OPERATION APPLICATIONS SIZING SOFTWARE
VN2000 Flow Meters Wafer Plate Inline Meter DESCRIPTION The VN2000 Wafer Plate Inline Flow Meter measures the volumetric or mass flow rate or BTU/energy of steam, gas or liquids over a large flow range.
More informationBIN & SEN Annular Pitot Tube Flow Meter. Form: 10-PTT-UM (December 2012) Installation & Operation Manual
BIN & SEN Annular Pitot Tube Flow Meter Form: 1-PTT-UM-349 (December 212) Installation & Operation Manual Installation Instructions 1. The primary station can be installed in any position on vertical or
More informationProduct Data Sheet. Positive Displacement Flow Meter B1750 DESCRIPTION
ESRIPTION Positive isplacement Flow Meter 175 The lancett Model 175 positive displacement flow meter provides high measurement accuracy, trouble-free operation and long service life for fluids over a wide
More informationProduct Data Sheet. VN2000 Flow Meters. Hot Tap Insertion Meter DESCRIPTION BENEFITS APPLICATIONS INSTALLATION OPERATION SIZING SOFTWARE
VN2000 Flow Meters Hot Tap Insertion Meter DESCRIPTION The VN2000 Hot Tap Insertion Vortex Flow Meter measures the volumetric flow, mass flow rate or BTU/energy of steam, gas or liquids over a large flow
More informationIndustrial Meters. Oscillating Piston, Model OP Chemical & Sanitary, Sizes 1/2", 1", 2" User Manual. OPM-UM EN-02 (August 2013)
Industrial Meters Oscillating Piston, Model OP Chemical & Sanitary, Sizes 1/2", 1", 2" OPM-UM-00291-EN-02 (August 2013) User Manual Industrial Meter, Oscillating Piston, Sizes 1/2" through 2" Model OP
More informationElectronic Preset Meter. Model EPM2-ADV-SF, Advanced Series, Special Fluids. User Manual. AUT-UM EN-05 (August 2015)
Electronic Preset Meter Model EPM2-ADV-SF, Advanced Series, Special Fluids AUT-UM-00916-EN-05 () User Manual Electronic Preset Meter, Model EPM2-ADV-SF, Advanced Series, Special Fluids Page ii AUT-UM-00916-EN-05
More informationProduct Data Sheet. Turbine Flow Meter. B16D Series FloClean Sanitary DESCRIPTION INSTALLATION REPAIR KITS
DESCRIPTION Turbine Flow Meter The FloClean Sanitary turbine flow meter was developed for use in the food, beverage and pharmaceutical industries. The 36L stainless steel construction provides a durable
More informationU500w Ultrasonic Meter. Cold Water Meters. User Manual. ESM-UM EN-04 (September 2017)
U500w Ultrasonic Meter Cold Water Meters ESM-UM-02205-EN-04 () User Manual U500w Ultrasonic Meter CONTENTS About the U500w Ultrasonic Meter 3 Safety Information 3 Product Unpacking and Inspection 3 Meter
More informationProduct Data Sheet. VN2000 Flow Meters. Hot Tap Insertion Meter DESCRIPTION BENEFITS APPLICATIONS INSTALLATION OPERATION SIZING SOFTWARE
VN2000 Flow Meters Hot Tap Insertion Meter DESCRIPTION The VN2000 Hot Tap Insertion Vortex Flow Meter measures the volumetric flow, mass flow rate or BTU/energy of steam, gas or liquids over a large flow
More informationIndustrial Turbo Meters. Sizes 2 in. through 6 in. User Manual. TUR-UM EN-21 (October 2017)
Industrial Turbo Meters Sizes 2 in. through 6 in. TUR-UM-00530-EN-21 () User Manual Industrial Turbo Meters, Sizes 2 in. through 6 in. Page ii TUR-UM-00530-EN-21 User Manual CONTENTS Scope of the Manual
More informationUser Manual. Recordall Compound Series Meter. Lead-Free Bronze Alloy, Sizes 2", 3", 4" & 6" NSF/ANSI Standards 61 and 372 Certified
Recordall Compound Series Meter Lead-Free Bronze Alloy, Sizes 2", 3", 4" & 6" NSF/ANSI Standards 61 and 372 Certified RCS-UM-00076-EN-04 (June 2016) User Manual Recordall Compound Series Meter, Lead-Free
More informationModel 200 Multi-Jet Flow Meter. 02-PDM-UM (July 2012) Installation & Operation Manual
Model 200 Multi-Jet Flow Meter 02-PDM-UM-00109 (July 2012) Installation & Operation Manual TABLE OF CONTENTS Introduction...3 Operating Principle...3 Specifications...4 Operating Limitations...5 Installation
More informationProduct Data Sheet. Electronic Valve Actuator. SEVA (Smart Electronic Valve Actuator) DESCRIPTION FEATURES APPROVALS / RATINGS OPERATION
Electronic Valve ctuator SEV (Smart Electronic Valve ctuator) DESCRIPTION The SEV is our next generation Smart Electric Valve ctuator that provides our customers with an electric actuator with best-in-class
More informationProduct Data Sheet. Flow Monitor. B2800 Series DESCRIPTION OPERATION FEATURES
Flow Monitor 2800 Series SRIPTION The 2800 flow monitor is designed to be comprehensive, user-friendly, flexible and cost efficient. This microprocessor-based display comes pre-calibrated when purchased
More informationTurbine Flow Meter. B16N Series FloClean Tri-Clover End Fitting. User Manual. TRB-UM EN-01 (December 2016)
Turbine Flow Meter B16N Series FloClean Tri-Clover End Fitting TRB-UM-02253-EN-01 () User Manual Turbine Flow Meter, B16N Series FloClean Tri-Clover End Fitting CONTENTS Scope of This Manual 3 Unpacking
More information400 Series IIS Magnetic Drive Positive Displacement Disc Meters Sizes 5/8-3/4-1
Sizes 5/8 3/4 1 Features APPLICATIONS: Measurement of cold water for residential and small commercial applications where water volumes are low, and low flow sensitivity is important. CONFORMANCE TO STANDARDS:
More informationWATER METER MATERIAL & ORDER INFORMATION
WATER METER MATERIAL & ORDER INFORMATION Supplier Contact: National Meter & Automation, Inc. PO Box 8339 2250 Apollo Way #300 Santa Rosa, CA 95407 Kathy Richards Phone 707/575 0700 Fax 707/575 3786 Toll
More information500 Series DI. 500 Series DI. Materials and Specifications. Magnetic Drive Positive Displacement Disc Meters Sizes 1-1/2 and 2. Features.
Features APPLICATIONS: Measurement of cold water for residential, commercial and industrial applications where water volumes are low, and low flow sensitivity is important. CONFORMANCE TO STANDARDS: Hersey
More informationTurbine Flow Meter. User Manual. Top Load 1 in. and 2 in. Meters. TRB-UM EN-01 (September 2018)
Turbine Flow Meter Top Load 1 in. and 2 in. Meters TRB-UM-02597-EN-01 () User Manual Turbine Flow Meter, Top Load 1 in. and 2 in. Meters CONTENTS Unpacking and Inspection.........................................
More informationProduct Data Sheet. Exact Dual Rotor. Turbine Flow Meters DESCRIPTION CALIBRATIONS APPLICATIONS
Exact Dual Rotor Turbine Flow Meters DESRIPTION The ox Exact Dual Rotor Turbine Flow Meter is the pinnacle of turbine meter technology that delivers results not attainable with single rotor designs. The
More informationPFM Portable Hydraulic Testers. PFM6, PFM6BD and PFM8. User Manual. TUR-UM EN-02 (August 2014)
PFM Portable Hydraulic Testers PFM6, PFM6BD and PFM8 TUR-UM-73-EN-2 () User Manual PFM Portable Hydraulic Testers, PFM6, PFM6BD and PFM8 CONTENTS Introduction.........................................................................iii
More informationTurbine Flow Meter B1500. User Manual. TRB-UM EN-02 (June 2016)
Turbine Flow Meter B1500 TRB-UM-01789-EN-02 () User Manual Turbine Flow Meter, B1500 Page ii TRB-UM-01789-EN-02 User Manual CONTENTS Safety information 5 Safety Symbol Explanations 5 Unpacking & Inspection
More informationSection G: Brass Service Materials
G 1 G 2 G 3 G 3.1 G 3.2 G 4 G 4.1 G 5 G 6 G 7 Inline Valves Straight Couplings Meter Setters (5/8" X 3/4" Meter) Meter Setters (1" Meter) Meter Setters (1 1/2"& 2 Meter) Dual Service U-Branch (5/8" X 3/4"
More informationModel Horizon. Horizon. Horizontal Turbine Meters Sizes 1-1/2" through 10" NOTICE OF DISCONTINUATION, Effective October 2011
Model tal Turbine Meters Sizes 1-1/2" through 10" NOTICE OF DISCONTINUATION, Effective October 2011 Mueller Systems has discontinued new sales of our meter line in an effort to introduce new metrology
More informationProduct Data Sheet. Turbine Flow Meters. Precision Series DESCRIPTION CALIBRATIONS APPLICATIONS
Turbine Flow Meters Precision Series DESRIPTION ox Precision Turbine Flow Meters have unprecedented mechanical linearity, resulting in minimizing, or negating, temperature induced viscosity influence.
More informationModel MVR. Model MVR. Materials and Specifications. Magnetic Drive Vertical Turbine Meters Sizes 3/4", 1", 1-1/2", 2", 3", 4" and 6" Features
Magnetic Drive Vertical Turbine Meters Sizes 3/4", 1", 11/2", 2", 3", 4" and 6" Features APPLICATIONS: Measurement of water for residential, commercial, industrial and residential fire applications, where
More informationVariable Area Flow Meters. Inline Pneumatic Flow Meter. User Manual. VAM-UM EN-02 (August 2014)
Variable Area Flow Meters Inline Pneumatic Flow Meter VAM-UM-00593-EN-02 () User Manual Variable Area Flow Meters, Inline Pneumatic Flow Meter CONTENTS Introduction.........................................................................
More informationVN2000 Flow Meters. Hot Tap Insertion Meter. User Manual. VRX-UM EN-03 (April 2018)
VN2000 Flow Meters Hot Tap Insertion Meter VRX-UM-02217-EN-03 () User Manual VN2000 Flow Meters, Hot Tap Insertion Meter Page 2 VRX-UM-02217-EN-03 User Manual CONTENTS Purpose of this Document................................................................
More informationFM 3. FM 3 with Bypass. Materials and Specifications. Fire Service Meter with Bypass Sizes 3, 4, 6, 8, 10. Features
Features APPLICATIONS: The Hersey Meters FM 3 fire service meter is designed for combined fire service and domestic water where a single supply line supports both fire and domestic or process needs. The
More informationInstallation & Operation Manual. Impeller Flow Sensors. IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE.
Impeller Flow Sensors 250 and 228 Metal Tee IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE. 872021-EN (August 2012) Rev. 8 Installation & Operation Manual 250 and 228
More informationFlow-Alert. Flow Switch GPM LPM OIL FLOW-ALERT FLOW SWITCH 6000 PSI / 414 BARS MAX. User Manual. VAM-UM EN-02 (September 2014)
Flow-Alert Flow Switch GPM LPM OIL FLOW-ALERT FLOW SWITCH 6 PSI / 414 BARS MAX VAM-UM-646-EN-2 () User Manual Coriolis Flow Meter, Flow Switch CONTENTS Introduction.........................................................................
More informationOMNI Compound Water Meter
OMNI Compound Water Meter 1-1/2, 2, 3, 4, 6, 8 and 10 OMNI C 2 Meter The OMNI Compound Water Meter (C 2 ) operation is based on advanced Floating Ball Technology (FBT). DESCRIPTION: Floating Ball Technology
More informationo-ring, testing port and a convenient integral strainer.
OMNI TM T 1-1/,, 3,,, and OMNI T Meter Description 1-1/,, 3,,, and Sizes The OMNI T meter operation is based on advanced Floating Ball Technology (FBT). Totalization Mode AMR/AMI Mode Resettable Test Mode
More informationsure o-ring, testing port and a convenient integral strainer. OMNI ELECTRONIC REGISTER
DS-W-OMT---11-3-A OMNI T TM 1-1/,, 3,,, and OMNI T Meter Description 1-1/,, 3,,, and Sizes The OMNI T meter operation is based on advanced Floating Ball Technology (FBT). Totalization Mode AMR/AMI Mode
More informationFlow Sensors. Series 228PV PVC Tee Type Flow Sensors. User Manual. SEN-UM EN-10 (February 2018)
Flow Sensors Series 228PV PVC Tee Type Flow Sensors SEN-UM-01664-EN-10 () User Manual Flow Sensors, PVC Tee Type Flow Sensors CONTENTS Introduction.........................................................................
More informationmaincase using a high pressure o-ring, testing port and an AWWA compliant strainer.
DS-W-OMC---11-3-A OMNI TM C 1-1/,, 3,,, and OMNI C Meter Description 1-1/,, 3,,, and Sizes The OMNI C meter operation is based on advanced Floating Ball Technology (FBT). Totalization Mode Features AMR/AMI
More informationResidential Metering Technologies. By: Ryan Fields TAUD Technical Conference Gatlinburg, TN March 2013
Residential Metering Technologies By: Ryan Fields TAUD Technical Conference Gatlinburg, TN March 2013 1 Today s Agenda: Why the need for Advancements? Mechanical Meter Technologies Multi-jet Positive Displacement
More informationUser Manual. Intrinsically Safe Flow Meters. RWG/RWBG Wafer Style Flow Meters RNG Insertion Style Flow Meters. VRX-UM EN-03 (October 2014) Flow
Intrinsically Safe Meters RWG/RWBG Wafer Style Meters RNG Insertion Style Meters FLOW VRX-UM-00374-EN-03 () User Manual Intrinsically Safe Meters, RWG/RWBG Wafer Style Meters & RNG Insertion Style Meters
More informationModel J. Thermostatic Control Valves. Typical applications. Key benefits. Key features. Accreditations available
Thermostatic Control Valves Model J Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationIMPORTANT!!!! Read this manual before attempting any installation, wiring or operation.
Industrial Turbo Meters Sizes 2" through 6" Installation & Operation Manual IMPORTANT!!!! Read this manual before attempting any installation, wiring or operation. BadgerMeter,Inc. IOM-003-15 Part No.
More informationThermostatic Control Valves
Thermostatic Control Valves Model H Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationPropeller Meters. Flow measurement solutions for water and wastewater
Propeller Meters Propeller Meters Flow measurement solutions for water and wastewater Perfect flow measurement solutions Water Specialties Propeller Meters are designed and manufactured with precise techniques
More informationLiquid Turbine Flowmeters
NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement In 1957, this flowmeter was developed with a tungsten-carbide shaft and bearing to withstand the rugged conditions of the oil field. Over the years,
More informationPFM Portable Hydraulic Testers. PFM6, PFM6BD, and PFM8. Badger Meter. Installation & Operation Manual. 05-TUR-UM EN (September 2012)
PFM Portable Hydraulic Testers PFM6, PFM6BD, and PFM8 Badger Meter 5-TUR-UM-193-EN (September 12) Installation & Operation Manual Page ii September 12 CONTENTS INTRODUCTION 5 PFM6 Digital Hydraulic Tester
More informationMULTI-JET WATER METERS
MULTI-JET WATER METERS INSTALLATION INSTRUCTIONS General Information Technical Data 3 Features 3 Applications 3 Dimensions 3 Pulse Rate 3 Pressure Loss Curve 3 Shipping Weight 3 Installation Position 4
More informationModel H. Thermostatic Control Valves. Typical applications. Key benefits. Key features. Accreditations
Thermostatic Control Valves Model H Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationflowserve.com Kämmer Multi-Z Kämmer Multi-Z Severe Service Valves
flowserve.com Severe Service Valves 1 Introduction Solids and cavitation completely under control Users from the power generation, petrochemical and industrial chemicals industries are frequently confronted
More informationProduct Data Sheet. Coriolis Flow Meter RCT1000 DESCRIPTION APPLICATIONS MAINTENANCE OPERATION FLUID DIAGNOSTICS ADVANTAGES
oriolis Flow Meter ESRIPTION RT1000 The RT1000 oriolis mass flow meter identifies flow rate by directly measuring mass flow and density of fluids over a wide range of process temperatures with a high degree
More informationVortex Flow Meters. Shedding Flow Meter RVL Series. User Manual. VRX-UM EN-03 (April 2017)
Vortex Meters Shedding Meter RVL Series VRX-UM-00371-EN-03 () User Manual Vortex Meters, Shedding Meter Page ii VRX-UM-00371-EN-03 March 2017 User Manual CONTENTS Description 5 Operating Principle 5 Fluids
More informationPrecision Flow Measurement Solutions. Test and Measurement
Precision Flow Measurement Solutions Test and Measurement Introduction Badger Meter is a leading innovator, manufacturer and marketer of flow measurement and control products, serving water and gas utilities,
More informationFlow-Alert Flow Switch
Flow-Alert Flow Switch GPM LPM OIL FLOW-ALERT FLOW SWITCH 6000 PSI / 414 BARS MAX FORM #04-VAM-UM-00229 (September 2012) Installation & Operation Manual I - INTRODUCTION The Flow-Alert flow meter combines
More informationVic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730
Series 730 Vic-Strainer is lighter than flanged Y type strainers and provides straightthrough flow for lower pressure drop. It installs with two Victaulic couplings, and is rated up to 750 psi/5175 kpa
More informationFlow meter Type Recordall (RCDL)
Badger Meter Europa GmbH Nürtinger Str. 76 72639 Neuffen (Germany) Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de badger@badgermeter.de Flow meter Type Recordall (RCDL) Bronze model Features
More informationLiquid Turbine Flowmeters
MEASUREMENT SYSTEMS NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and
More informationMADE IN THE USA BACKFLOW PREVENTERS
MADE IN THE USA BACKFLOW PREVENTERS TABLE OF CONTENTS Selection Guide........................................................................3 Double Check Valve (Series 40-100)......................................................4,5
More informationBulletin: Floating Ball Valve. Tartarini Floating Ball Valve. Introduction. Features and Benefits
Tartarini Floating Ball Valve Bulletin: Floating Ball Valve May 2011 Figure 1. Tartarini Floating Ball Valve Introduction Tartarini Floating Ball Valve is a general-purpose valve. It is used for long range
More informationT205VB Series Tank Blanketing Vacuum Breakers
February 2014 T205VB Series Tank Blanketing Vacuum Breakers Figure 1. Typical T205VB Series Vacuum Breaker Introduction The T205VB Series vacuum breakers (Figure 1) are used for precise control of small
More informationEMISSION-PAK SERIES 7000 AND 9000 BALL VALVES
EMISSION-PAK SERIES 7000 AND 9000 BALL VALVES The Emission-Pak provides a simple and economical method to meet emissions standards. It is supplied as a factory mounted valve assembly. The Emission-Pak
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationSelf-Operating Temperature Regulators
Self-Operating Temperature Regulators Remote Bulb for Heating, Cooling, Mixing and By-Pass Applications Powers # Regulators With Powers # Self-Operating Temperature Regulators, you no longer need external
More informationModel E. Thermostatic Control Valves. Typical applications
Thermostatic Control Valves Model E Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationTriple offset technology for lower pressures.
Triple offset technology for lower pressures. Vanessa Series 30-RS Triple Offset Valves A triple offset valve designed for the specific needs of general applications in lower pressure classes. Emerson.com/FinalControl
More informationY610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
More informationK81-D FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-D FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J L M K N P Q S R
More information5LS, 7LS, 10LS, 13LS, 18LS & 25LS 5-25 GPM, ½ 1½ HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
More informationVane Pumps for Corrosive, Thin Liquids at Higher Pressures
Viking LVP Series Stainless Steel Vane Pumps Vane Pumps for Corrosive, Thin Liquids at Higher Pressures Higher pressures than other stainless positive displacement pumps Low-wear, long-life vanes Superior
More informationIndustrial Turbo Meters, Sizes 2" through 6"
Industrial Turbo Meters Sizes 2" through 6" TUR-UM-00530-EN-19 (October 2014) User Manual Industrial Turbo Meters, Sizes 2" through 6" User Manual CONTENTS Scope of the Manual 5 Specifications 5 Product
More information100H, 150H, 225H, 275H
TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationK81-DD FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-DD FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J K M L N P Q S R
More informationAWWA C 504 Type - Butterfly Valves AWWA C 504 BUTTERFLY VALVES
AWWA C 504 BUTTERFLY VALVES 19 PRODUCT FEATURES: NSF Certified Fusion Bonded Epoxy Coating and EPDM rubber are used for valves to be used for in direct contact with potable (drinking) water, while all
More informationSeries 758 FireLock Actuated System Valve
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 58 FireLock Actuated System Valve With Deluge Trim Grooved X Grooved and Flanged X Grooved 30.04 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT
More informationreliable actuators to
reliable actuators to & Fit Forget Pneumatic Rack & Pinion Actuators a new look Reliable As Ever 40 years of success and still delivering The EL-O-Matic F-Series actuator is the result of 40 years of production
More informationWater and Chemical Batching. Precision Measurement for Ready-Mix and Concrete Batch Plants. Concrete Meter Overview
Water and Chemical Batching. Precision Measurement for Ready-Mix and Concrete Batch Plants. Concrete Meter Overview Every drop counts. Measure and precisely control the amount of water and chemical additives
More informationTurbine Flow Sensors. Activa, Ultima, Classic and Quad. User Manual. SEN-UM EN-02 (March 2015)
Turbine Flow Sensors ctiva, Ultima, Classic and Quad SEN-UM-00987-EN-02 () User Manual Turbine Flow Sensors, ctiva, Ultima, Classic and Quad Page 2 User Manual CONTENTS Introduction.........................................................................
More informationKämmer Multi-Z Severe Service Valves
flowserve.com Käer Multi-Z Severe Service Valves Käer Multi-Z Introduction and cavitation completely under control Users from the power generation, petrochemical and industrial chemicals industries are
More informationInstallation Instructions
Installation Instructions CPM Series Dual, cartridge mounted, flexible stator pusher seal designed for general service applications CPM PP Experience In Motion Description The CPM PP seal is a cartridge
More informationHS10S-FA. Water station. Product specification sheet
HS10S-FA Water station Product specification sheet Range of Application Medium Drinking water Inlet pressure Max. 16 bar Outlet pressure 1.5-6.5 bar Installation position Horizontal with filter bowl downwards
More informationSeries 756 FireLock Dry System Check Valve
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock Dry System Check Valve Grooved X Grooved and Flanged X Grooved 0.0 VICTAULIC IS AN ISO 900 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic
More informationThermostatic Control Valve
Thermostatic Control Valve Model J Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More information