Parts List. Recordall Turbo Series Meters
|
|
- Abigayle Carmel Fowler
- 5 years ago
- Views:
Transcription
1 Recordall Turbo Series Meters Models 160 (1-1/ in.), 00 ( in.), 450 (3 in.), 1000 (4 in.), 000 (6 in.), 3500 (8 in.), 5500 (10 in.), 600 (1 in.) Models without Integral Strainers, Sizes 1-1/ 1 in. Models with Integral Strainers, Sizes 1-1/ 4 in. RTS-PS-0004-EN-05 (July 016) Parts List
2 Recordall Turbo Series Meters Sizes 1-1/ in., in., 3 in. and 4 in. 1b c 1a b 3a 5a 7 4 5b 6a b 16a a 7 NOTE: Service Element Assembly (item 15) components are outlined in red. Numbered components are also available for individual purchase b , 31 Page RTS-PS-0004-EN-05 July 016
3 Parts List Item Description Part Numbers for Sizes 1-1/ in., in., 3 in. and 4 in. 1-1/ in. in. 3 in. 4 in. 1a Register flat lid (plastic) b Register flat lid (bronze) c Register flat lid and shroud (bronze) Register, 100 gallon T. C Register, 100 gallon T. C. (Reclaimed) Register, 10 cubic ft T.C Register, 10 cubic ft T.C. (Reclaimed) Register, 1 cubic meter T. C Register, 1000 gallon T.C. Register, 100 cubic ft T.C. Register, 10 cubic meter T.C. 3a Tamper-resistant screw, standard (for local register, ADE, RTR ) Tamper-resistant screw, standard (for HR-E LCD encoder, not shown) b Tamper-resistant TORX seal screw (for local register, ADE, RTR) Tamper-resistant TORX seal screw (for HR-E LCD encoder, not shown) c Tamper-resistant keyed seal screw, standard (for local register, ADE, RTR) Tamper-resistant keyed seal screw, short (for HR-E LCD encoder, not shown) Plastic shroud (bottom half) Plastic shroud (top half) Bronze shroud (for flat lid) Plastic insert for flat lid bronze shroud Flat lid hinge pin Head assembly (LL), complete Head assembly (LL), complete (for models with integral strainer) O-Ring, calibration shaft Seal plug, calibration shaft Lock screw, calibration shaft Calibration shaft Cover plate (LL) Service element assembly Service element assembly (for models with integral strainer) a Cage / nosecone setscrews ( required) b Cage setscrew (1 required) Magnet carrier with top ball O-Ring, head Cage seal Strainer cover (LL) (for models with integral strainer) Cover Bolt (for models with integral strainer) Screen (for models with integral strainer) Gasket (for models with integral strainer) Washer for strainer cover (for models with integral strainer) a Head bolt, w/seal hole (1 required) b Head bolt, w/o seal hole (3 required) a TORX seal screw driver and bit (long) b TORX seal screw driver and bit (stubby) Register test ring Plastic shroud disassembly tool Test plug (LL) Housing, round flange (LL), w/o test plug Housing, round flange (LL), w/ test plug Housing, round flange (LL), w/ test plug (for models with integral strainer) Housing, elliptical flnage (LL) w/o test plug Housing, elliptical flnage (LL) w/ test plug Housing, elliptical flnage (LL) w/ test plug (for models with integral strainer) TORX seal screw driver bit (not shown) Driver bit, keyed seal screw (not shown) Bit driver, stubby, without bit (not shown) Bit driver, standard, without bit (not shown) July 016 RTS-PS-0004-EN-05 Page 3
4 Recordall Turbo Series Meters Sizes 6 in., 8 in., 10 in. and 1 in. 1b 6 1c 1a 8 5 3b 3a a a 18 4a 4b 9 NOTE: Service Element Assembly (item 18) components are outlined in red. Numbered components are also available for individual purchase. 0b Page 4 RTS-PS-0004-EN-05 July 016
5 Parts List Item Description Part Numbers Part Numbers for Sizes 6 in., 8 in., 10 in. and 1 in. 6 in. 8 in. 10 in. 1 in. 1a Register flat lid (plastic) b Register flat lid (bronze) c Register flat lid and shroud (bronze) Register, 10,000 gallon T. C Register, 10,000 gallon T. C. (reclaimed) Register, 1000 cubic ft T.C Register, 1000 cubic ft T.C. (reclaimed) Register, 1 cubic meter T. C. Register, 1000 gallon T.C Register, 1000 gallon T.C. (reclaimed) Register, 100 cubic ft T.C Register, 100 cubic ft T.C. (reclaimed) Register, 10 cubic meter T.C a Tamper-resistant screw, standard (for local register, ADE, RTR) Tamper-resistant screw, standard (for HR-E LCD encoder, not shown) b Tamper-resistant TORX seal screw (for local register, ADE, RTR) Tamper-resistant TORX seal screw (for HR-E LCD encoder, not shown) c Tamper-resistant keyed seal screw, standard (for local register, ADE, RTR) Tamper-resistant keyed seal screw, short (for HR-E LCD encoder, not shown) Plastic shroud (bottom half) Plastic shroud (top half) Bronze shroud (for flat lid) Plastic insert for flat lid bronze shroud Flat lid hinge pin Head assembly (LL), complete Eyebolts Lock screw, calibration shaft Seal plug, calibration shaft O-Ring, calibration shaft Calibration shaft Head bolt, w/seal hole (6 in., 1 required; 8 1 in., required) Head bolt, w/o seal hole (6 in., 7 required; 8 1 in., 8 required) Calibration gear Cover plate (LL) Service Element Assembly O-Ring, head a Cage / nosecone setscrews ( required) b Cage setscrew (4 required) Magnet carrier (with top ball) Screw Cage seal a TORX seal screw driver and bit (long) b TORX seal screw driver and bit (stubby) Register test ring Plastic shroud disassembly tool Test plug (LL) Housing, round flange (LL) w/o test plug Housing, round flange (LL) w/ test plug Housing, round flange (Cast Iron) w/o test plug Washer (4 required) TORX seal screw driver bit (not shown) Driver bit, keyed seal screw (not shown) Bit driver, stubby, without bit (not shown) Bit driver, standard, without bit (not shown) July 016 RTS-PS-0004-EN-05 Page 5
6 Recordall Turbo Series Meters THIS PAGE INTENTIONALLY BLANK Page 6 RTS-PS-0004-EN-05 July 016
7 Parts List THIS PAGE INTENTIONALLY BLANK July 016 RTS-PS-0004-EN-05 Page 7
8 Recordall Turbo Series Meters Making Water Visible ADE, GALAXY, HR E, Making Water Visible, ORION, Recordall and RTR are registered trademarks of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists. 016 Badger Meter, Inc. All rights reserved. The Americas Badger Meter 4545 West Brown Deer Rd PO Box Milwaukee, WI México Badger Meter de las Americas, S.A. de C.V. Pedro Luis Ogazón N 3 Esq. Angelina N 4 Colonia Guadalupe Inn CP México, DF México Europe, Middle East and Africa Badger Meter Europa GmbH Nurtinger Str Neuffen Germany Europe, Middle East Branch Office Badger Meter Europe PO Box Dubai Silicon Oasis, Head Quarter Building, Wing C, Office #C09 Dubai / UAE Czech Republic Badger Meter Czech Republic s.r.o. Maříkova 08/ Brno, Czech Republic Slovakia Badger Meter Slovakia s.r.o. Racianska 109/B Bratislava, Slovakia Asia Pacific Badger Meter 80 Marine Parade Rd 1-06 Parkway Parade Singapore China Badger Meter Hangzhong Road Minhang District Shanghai China Switzerland I Badger Meter Swiss AG I Mittelholzerstrasse 8 I 3006 Bern I Switzerland I Legacy Document Numbers: RTS-P-1 and RTS-P-
Product Data Sheet DESCRIPTION
Turbo Series Meters Models 16 (11/), 2 (), 4 (3 in.), (4 in.), 2 (6 in.), 3 (8 in.), ( in.) and 62 (1) NSF/ANSI Standards 61 and 372 Certified DESCRIPTION Turbo Series meters meet or exceed the most recent
More informationProduct Data Sheet. Recordall Disc Meters. Lead-Free Bronze Alloy, Sizes 5/8", 5/8" x 3/4", 3/4" & 1" NSF/ANSI Standards 61 and 372 Certified
Recordall Disc Meters LeadFree Bronze Alloy, Sizes /8", /8" x 3/4", 3/4" & " NSF/ANSI Standards 6 and 372 Certified LP /8", /8" 3/4" 2 /8", /8" 3/4" 3 3/4" " 7 " DESCRIPTION The Recordall Disc Series meters
More informationProduct Data Sheet DESCRIPTION
Turbo Series Meters Models 16 (11/2"), 2 (2"), 4 (3"), (4"), 2 (6"), 3 (8"), ("), & 62 (12"); NSF/ANSI Standards 61 and 372 Certified DESCRIPTION Turbo Series meters meet or exceed the most recent revision
More informationProduct Data Sheet. Recordall Disc Meters. Lead-Free Bronze Alloy, Sizes 5/8, 5/8 x 3/4, 3/4 & 1 inch NSF/ANSI Standards 61 and 372 Certified
Recordall Disc Meters LeadFree Bronze Alloy, Sizes /8, /8 x 3/4, 3/4 & inch NSF/ANSI Standards 6 and 372 Certified 2 /8 in., /8 3/4 in. 3 3/4 in. in. 7 in. DESCRIPTION The Recordall Disc Series meters
More informationProduct Data Sheet. Industrial Oval Gear. Inline and Flanged Meters, 1/2", 3/4", 1", 1" HF, 1-1/2", 2", 3" DESCRIPTION OPERATING PRINCIPLE
Industrial Oval Gear Inline and Flanged Meters, 1/2", 3/4", 1", 1" HF, 1-1/2", 2", 3" DESCRIPTION The Badger Meter Industrial Oval Gear Meter, Model IOG is a modular flow meter design, economical yet highly
More informationProduct Data Sheet. Recordall Fire Series Assemblies (FSAA) Cold Water Meter & Strainer with Disc Bypass DESCRIPTION
Fire Series Assemblies (FSAA) Cold Water Meter & Strainer with Disc Bypass UL Certified & FM Standard Approved for Fire Service Applications NSF/ANSI Standards and Certified DESCIPTION Fire Series assemblies
More informationVariable Area Flow Meters and Flow Switches. Easy-to-Use and Reliable Flow Measurement.
Variable Area and Flow Switches Easy-to-Use and Reliable Flow Measurement. Variable Area and Flow Switches The Hedland product line features over 15,000 inline, variable area flow meters to measure oil,
More informationProduct Data Sheet. Turbine Flow Meter. QuikSert DESCRIPTION INSTALLATION FEATURES REPAIR KITS
DESCRIPTION Turbine Flow Meter QuikSert The QuikSert in-line turbine flow meter was developed for liquid applications where accuracy and dependability are needed. QuikSert s stainless steel body incorporates
More informationProduct Data Sheet. Recordall Fire Series Assembly (FSAA) Cold Water Meter & Strainer with Turbine Bypass DESCRIPTION
Fire Series Assembly (FSAA) Cold Water Meter & Strainer with Turbine Bypass UL Certified & FM Standard Approved for Fire Service Applications NSF/ANSI Standards and Certified DESCIPTION Fire Series assemblies
More informationProduct Data Sheet. Flow Sensors. Insert Style Flow Sensors SDI Series DESCRIPTION HOT TAP SENSORS (OPTIONAL) APPLICATIONS FUNCTIONALITY
DESCRIPTION Flow Sensors Insert Style Flow Sensors SDI Series The Data Industrial SDI Series insert flow sensors from Badger Meter offer accurate liquid flow measurement in closed pipe systems in an easy
More informationProduct Data Sheet. VN2000 Flow Meters. Wafer Plate Inline Meter DESCRIPTION BENEFITS OPERATION APPLICATIONS SIZING SOFTWARE
VN2000 Flow Meters Wafer Plate Inline Meter DESCRIPTION The VN2000 Wafer Plate Inline Flow Meter measures the volumetric or mass flow rate or BTU/energy of steam, gas or liquids over a large flow range.
More informationApplication Data Sheet. Chemical Compatibility Chart. IND-AS EN-01 (May, 2014) Metals Plastics Seals KEY. Good. Fair. Ethylene Propylene.
Chemical Compatibility Chart 6 Stainless Acetic Acid Acetone Acetylene Acidic Mine Water Acrylonitrile Ammonium Chloride Ammonium Hydroxide Ammonium Sulfate Ammonium Thio-Sulfate Anhydrous Ammonia Anhydrous
More informationAutomotive Flow Measurement and Control Products
Automotive Flow Measurement and Control Products Control. Manage. Optimize. Automotive Flow Measurement and Control Products When every drop counts, choose automotive flow measurement and control products
More informationProduct Data Sheet. VN2000 Flow Meters. Compact Insertion Meter DESCRIPTION BENEFITS APPLICATIONS INSTALLATION
VN2000 Flow Meters Compact Insertion Meter DESCRIPTION The VN2000 Compact Insertion Vortex Flow Meter measures the volumetric or mass flow rate or BTU/energy of steam, gas or liquids over a large flow
More informationUser Manual. Ellipse Pitot Tube Meter. PFA Fire Pump System. PTT-UM EN-03 (March 2017) 2500 GPM 3000 F M
Ellipse Pitot Tube Meter PFA Fire Pump System 500 GPM 3000 000 3500 1500 1000 PFA-XXX X inch 50 SWP X/XX S/N AXXXXXXX 4000 METERS PTT-UM-0053-EN-03 () User Manual Ellipse Pitot Tube Meter, PFA Fire Pump
More informationProduct Data Sheet. VN2000 Flow Meters. Hot Tap Insertion Meter DESCRIPTION BENEFITS APPLICATIONS INSTALLATION OPERATION SIZING SOFTWARE
VN2000 Flow Meters Hot Tap Insertion Meter DESCRIPTION The VN2000 Hot Tap Insertion Vortex Flow Meter measures the volumetric flow, mass flow rate or BTU/energy of steam, gas or liquids over a large flow
More informationControl Valves. Type HP-10, 10,000 PSI. User Manual. RCV-UM EN-01 (August 2014)
Control Valves Type HP-10, 10,000 PSI RCV-UM-01034-EN-01 () User Manual Control Valves Type HP-10, 10,000 PSI Page ii User Manual CONTENTS Overview...........................................................................
More informationTurbine Flow Meter. Model User Manual. TRB-UM EN-03 (December 2015)
Turbine Flow Meter Model 1200 TRB-UM-00290-EN-03 () User Manual Turbine Flow Meter, Model 1200 CONTENTS Scope of This Manual 3 Unpacking and Inspection 3 Safety 3 Terminology and Symbols 3 Considerations
More informationBIN & SEN Annular Pitot Tube Flow Meter. Form: 10-PTT-UM (December 2012) Installation & Operation Manual
BIN & SEN Annular Pitot Tube Flow Meter Form: 1-PTT-UM-349 (December 212) Installation & Operation Manual Installation Instructions 1. The primary station can be installed in any position on vertical or
More informationProduct Data Sheet. VN2000 Flow Meters. Hot Tap Insertion Meter DESCRIPTION BENEFITS APPLICATIONS INSTALLATION OPERATION SIZING SOFTWARE
VN2000 Flow Meters Hot Tap Insertion Meter DESCRIPTION The VN2000 Hot Tap Insertion Vortex Flow Meter measures the volumetric flow, mass flow rate or BTU/energy of steam, gas or liquids over a large flow
More informationProduct Data Sheet. Turbine Flow Meter. B16D Series FloClean Sanitary DESCRIPTION INSTALLATION REPAIR KITS
DESCRIPTION Turbine Flow Meter The FloClean Sanitary turbine flow meter was developed for use in the food, beverage and pharmaceutical industries. The 36L stainless steel construction provides a durable
More informationIndustrial Turbo Meters. Sizes 2 in. through 6 in. User Manual. TUR-UM EN-21 (October 2017)
Industrial Turbo Meters Sizes 2 in. through 6 in. TUR-UM-00530-EN-21 () User Manual Industrial Turbo Meters, Sizes 2 in. through 6 in. Page ii TUR-UM-00530-EN-21 User Manual CONTENTS Scope of the Manual
More informationUser Manual. Industrial Meters. Oscillating Piston, Sizes 1/2", 1" and 2" Model OP Sanitary (3A Approved) and Model OP Chemical
Industrial Meters Oscillating Piston, Sizes 1/2", 1" and 2" Model OP Sanitary (3A Approved) and Model OP Chemical OPM-DS-00291-EN-03 () User Manual Industrial Meters, Oscillating Piston, Sizes 1/2", 1"
More informationElectronic Preset Meter. Model EPM2-ADV-SF, Advanced Series, Special Fluids. User Manual. AUT-UM EN-05 (August 2015)
Electronic Preset Meter Model EPM2-ADV-SF, Advanced Series, Special Fluids AUT-UM-00916-EN-05 () User Manual Electronic Preset Meter, Model EPM2-ADV-SF, Advanced Series, Special Fluids Page ii AUT-UM-00916-EN-05
More informationProduct Data Sheet. Positive Displacement Flow Meter B1750 DESCRIPTION
ESRIPTION Positive isplacement Flow Meter 175 The lancett Model 175 positive displacement flow meter provides high measurement accuracy, trouble-free operation and long service life for fluids over a wide
More informationRecordall Combo Meter Lead-Free Bronze Alloy, Size 8" (DN 200) NSF/ANSI Standards 61 and 372 Certified RCO-UM EN-02 (October 2013) User Manual
Recordall Combo Meter Lead-Free Bronze Alloy, Size 8" (DN 200) NSF/ANSI Standards 61 and 372 Certified RCO-UM-00077-EN-02 (October 2013) User Manual Recordall Combo Meter, 8" Page ii October 2013 User
More informationProduct Data Sheet. Electronic Valve Actuator. SEVA (Smart Electronic Valve Actuator) DESCRIPTION FEATURES APPROVALS / RATINGS OPERATION
Electronic Valve ctuator SEV (Smart Electronic Valve ctuator) DESCRIPTION The SEV is our next generation Smart Electric Valve ctuator that provides our customers with an electric actuator with best-in-class
More informationTurbine Flow Meter. B16N Series FloClean Tri-Clover End Fitting. User Manual. TRB-UM EN-01 (December 2016)
Turbine Flow Meter B16N Series FloClean Tri-Clover End Fitting TRB-UM-02253-EN-01 () User Manual Turbine Flow Meter, B16N Series FloClean Tri-Clover End Fitting CONTENTS Scope of This Manual 3 Unpacking
More informationUser Manual. Recordall Compound Series Meter. Lead-Free Bronze Alloy, Sizes 2", 3", 4" & 6" NSF/ANSI Standards 61 and 372 Certified
Recordall Compound Series Meter Lead-Free Bronze Alloy, Sizes 2", 3", 4" & 6" NSF/ANSI Standards 61 and 372 Certified RCS-UM-00076-EN-04 (June 2016) User Manual Recordall Compound Series Meter, Lead-Free
More informationIndustrial Meters. Oscillating Piston, Model OP Chemical & Sanitary, Sizes 1/2", 1", 2" User Manual. OPM-UM EN-02 (August 2013)
Industrial Meters Oscillating Piston, Model OP Chemical & Sanitary, Sizes 1/2", 1", 2" OPM-UM-00291-EN-02 (August 2013) User Manual Industrial Meter, Oscillating Piston, Sizes 1/2" through 2" Model OP
More informationModel 200 Multi-Jet Flow Meter. 02-PDM-UM (July 2012) Installation & Operation Manual
Model 200 Multi-Jet Flow Meter 02-PDM-UM-00109 (July 2012) Installation & Operation Manual TABLE OF CONTENTS Introduction...3 Operating Principle...3 Specifications...4 Operating Limitations...5 Installation
More informationU500w Ultrasonic Meter. Cold Water Meters. User Manual. ESM-UM EN-04 (September 2017)
U500w Ultrasonic Meter Cold Water Meters ESM-UM-02205-EN-04 () User Manual U500w Ultrasonic Meter CONTENTS About the U500w Ultrasonic Meter 3 Safety Information 3 Product Unpacking and Inspection 3 Meter
More informationProduct Data Sheet. Flow Monitor. B2800 Series DESCRIPTION OPERATION FEATURES
Flow Monitor 2800 Series SRIPTION The 2800 flow monitor is designed to be comprehensive, user-friendly, flexible and cost efficient. This microprocessor-based display comes pre-calibrated when purchased
More informationTurbine Flow Meter B1500. User Manual. TRB-UM EN-02 (June 2016)
Turbine Flow Meter B1500 TRB-UM-01789-EN-02 () User Manual Turbine Flow Meter, B1500 Page ii TRB-UM-01789-EN-02 User Manual CONTENTS Safety information 5 Safety Symbol Explanations 5 Unpacking & Inspection
More informationProduct Data Sheet. Turbine Flow Meters. Precision Series DESCRIPTION CALIBRATIONS APPLICATIONS
Turbine Flow Meters Precision Series DESRIPTION ox Precision Turbine Flow Meters have unprecedented mechanical linearity, resulting in minimizing, or negating, temperature induced viscosity influence.
More informationWATER METER MATERIAL & ORDER INFORMATION
WATER METER MATERIAL & ORDER INFORMATION Supplier Contact: National Meter & Automation, Inc. PO Box 8339 2250 Apollo Way #300 Santa Rosa, CA 95407 Kathy Richards Phone 707/575 0700 Fax 707/575 3786 Toll
More informationTurbine Flow Meter. User Manual. Top Load 1 in. and 2 in. Meters. TRB-UM EN-01 (September 2018)
Turbine Flow Meter Top Load 1 in. and 2 in. Meters TRB-UM-02597-EN-01 () User Manual Turbine Flow Meter, Top Load 1 in. and 2 in. Meters CONTENTS Unpacking and Inspection.........................................
More informationVN2000 Flow Meters. Hot Tap Insertion Meter. User Manual. VRX-UM EN-03 (April 2018)
VN2000 Flow Meters Hot Tap Insertion Meter VRX-UM-02217-EN-03 () User Manual VN2000 Flow Meters, Hot Tap Insertion Meter Page 2 VRX-UM-02217-EN-03 User Manual CONTENTS Purpose of this Document................................................................
More informationProduct Data Sheet. Exact Dual Rotor. Turbine Flow Meters DESCRIPTION CALIBRATIONS APPLICATIONS
Exact Dual Rotor Turbine Flow Meters DESRIPTION The ox Exact Dual Rotor Turbine Flow Meter is the pinnacle of turbine meter technology that delivers results not attainable with single rotor designs. The
More informationVariable Area Flow Meters. Inline Pneumatic Flow Meter. User Manual. VAM-UM EN-02 (August 2014)
Variable Area Flow Meters Inline Pneumatic Flow Meter VAM-UM-00593-EN-02 () User Manual Variable Area Flow Meters, Inline Pneumatic Flow Meter CONTENTS Introduction.........................................................................
More informationPFM Portable Hydraulic Testers. PFM6, PFM6BD and PFM8. User Manual. TUR-UM EN-02 (August 2014)
PFM Portable Hydraulic Testers PFM6, PFM6BD and PFM8 TUR-UM-73-EN-2 () User Manual PFM Portable Hydraulic Testers, PFM6, PFM6BD and PFM8 CONTENTS Introduction.........................................................................iii
More informationInstallation & Operation Manual. Impeller Flow Sensors. IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE.
Impeller Flow Sensors 250 and 228 Metal Tee IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE. 872021-EN (August 2012) Rev. 8 Installation & Operation Manual 250 and 228
More informationFlow-Alert. Flow Switch GPM LPM OIL FLOW-ALERT FLOW SWITCH 6000 PSI / 414 BARS MAX. User Manual. VAM-UM EN-02 (September 2014)
Flow-Alert Flow Switch GPM LPM OIL FLOW-ALERT FLOW SWITCH 6 PSI / 414 BARS MAX VAM-UM-646-EN-2 () User Manual Coriolis Flow Meter, Flow Switch CONTENTS Introduction.........................................................................
More informationFlow Sensors. Series 228PV PVC Tee Type Flow Sensors. User Manual. SEN-UM EN-10 (February 2018)
Flow Sensors Series 228PV PVC Tee Type Flow Sensors SEN-UM-01664-EN-10 () User Manual Flow Sensors, PVC Tee Type Flow Sensors CONTENTS Introduction.........................................................................
More informationUser Manual. Intrinsically Safe Flow Meters. RWG/RWBG Wafer Style Flow Meters RNG Insertion Style Flow Meters. VRX-UM EN-03 (October 2014) Flow
Intrinsically Safe Meters RWG/RWBG Wafer Style Meters RNG Insertion Style Meters FLOW VRX-UM-00374-EN-03 () User Manual Intrinsically Safe Meters, RWG/RWBG Wafer Style Meters & RNG Insertion Style Meters
More informationProduct Data Sheet. Coriolis Flow Meter RCT1000 DESCRIPTION APPLICATIONS MAINTENANCE OPERATION FLUID DIAGNOSTICS ADVANTAGES
oriolis Flow Meter ESRIPTION RT1000 The RT1000 oriolis mass flow meter identifies flow rate by directly measuring mass flow and density of fluids over a wide range of process temperatures with a high degree
More informationVortex Flow Meters. Shedding Flow Meter RVL Series. User Manual. VRX-UM EN-03 (April 2017)
Vortex Meters Shedding Meter RVL Series VRX-UM-00371-EN-03 () User Manual Vortex Meters, Shedding Meter Page ii VRX-UM-00371-EN-03 March 2017 User Manual CONTENTS Description 5 Operating Principle 5 Fluids
More informationPFM Portable Hydraulic Testers. PFM6, PFM6BD, and PFM8. Badger Meter. Installation & Operation Manual. 05-TUR-UM EN (September 2012)
PFM Portable Hydraulic Testers PFM6, PFM6BD, and PFM8 Badger Meter 5-TUR-UM-193-EN (September 12) Installation & Operation Manual Page ii September 12 CONTENTS INTRODUCTION 5 PFM6 Digital Hydraulic Tester
More informationIMPORTANT!!!! Read this manual before attempting any installation, wiring or operation.
Industrial Turbo Meters Sizes 2" through 6" Installation & Operation Manual IMPORTANT!!!! Read this manual before attempting any installation, wiring or operation. BadgerMeter,Inc. IOM-003-15 Part No.
More informationPrecision Flow Measurement Solutions. Test and Measurement
Precision Flow Measurement Solutions Test and Measurement Introduction Badger Meter is a leading innovator, manufacturer and marketer of flow measurement and control products, serving water and gas utilities,
More informationFlow-Alert Flow Switch
Flow-Alert Flow Switch GPM LPM OIL FLOW-ALERT FLOW SWITCH 6000 PSI / 414 BARS MAX FORM #04-VAM-UM-00229 (September 2012) Installation & Operation Manual I - INTRODUCTION The Flow-Alert flow meter combines
More informationSection G: Brass Service Materials
G 1 G 2 G 3 G 3.1 G 3.2 G 4 G 4.1 G 5 G 6 G 7 Inline Valves Straight Couplings Meter Setters (5/8" X 3/4" Meter) Meter Setters (1" Meter) Meter Setters (1 1/2"& 2 Meter) Dual Service U-Branch (5/8" X 3/4"
More informationTurbine Flow Sensors. Activa, Ultima, Classic and Quad. User Manual. SEN-UM EN-02 (March 2015)
Turbine Flow Sensors ctiva, Ultima, Classic and Quad SEN-UM-00987-EN-02 () User Manual Turbine Flow Sensors, ctiva, Ultima, Classic and Quad Page 2 User Manual CONTENTS Introduction.........................................................................
More informationNational Crane Series 1100
National Crane Series 1100 Product Guide Features ř 25,4 t (28 USt) rating ř 32,0 m (105 ft) four-section boom m ř Self-lubricating Easy Glide wear ar pads Features National Crane 1100 Four-section boom
More informationCOUNCIL ACTION FORM CONTRACT RENEWAL FOR WATER METERS AND RELATED ACCESSORIES
ITEM # _27 DATE 06-09-15 COUNCIL ACTION FORM SUBJECT: CONTRACT RENEWAL FOR WATER METERS AND RELATED ACCESSORIES BACKGROUND: On February 10, 2015, Itron, Inc. was awarded a contract for the procurement
More informationSteel Outlet Boxes 4 11 /16" Welded
Steel Outlet Boxes 4 11 /16" Welded Steel Outlet Boxes Features & Benefits Ideal for exposed work applications, providing an easy method for the installation of electrical devices (switches, receptacles,
More informationPLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of
More informationLight Engine Duct Upgrade Instruction Sheet
Light Engine Duct Upgrade Instruction Sheet This document provides procedures to install a light engine duct upgrade kit in Christie CP4220 and CP4230 projectors. The light engine duct upgrade kit improves
More informationThermostatic Control Valves
Thermostatic Control Valves Model H Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationHYGIENIC CENTRIFUGAL PUMPS
Capacity to 900 GPM (210 M³/hr) Pressure to 190 PSI (13 Bar) Viscosity to 2,700 SSU (0 cps) Temperature to 380 F (195 C) HYGIENIC CENTRIFUGAL PUMPS TRA 0 Series The TRA 0 Series Centrifugal Pump With its
More informationESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC
6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial
More informationRectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
More informationY610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
More informationIllustrated Parts List FRY HOLDING UNIT (FHU) Duke Manufacturing Co. MODELS FHU1 FHU2
Illustrated Parts List FRY HOLDING UNIT (FHU) MODELS FHU1 FHU2 This manual is Copyright 2014 Duke Manufacturing Co. All rights reserved. Reproduction without written permission is prohibited. Duke is a
More informationPARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
More informationreplacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
More informationBARTON 7000 Series Liquid Turbine Meters
TECHNICAL SPECIFICATIONS BARTON 7000 Series Liquid Turbine Meters Cameron s BARTON 7000 series turbine meters are designed for a broad range of precise liquid measurement applications. Based on more than
More informationsee. think. act. ZF cpower
see. think. act. ZF cpower ZF cpower Tailor-made for the markets The fully powersplit, continuously variable technology benefits from the long-term experience gained in the agricultural machinery sector
More informationBP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
More informationEaton Hydrostatic Transaxle. Parts Information. Transaxle Series 751. May, 1999
Eaton Hydrostatic Transaxle May, 999 Parts Information Transaxle Series 75 Series 75 3 4 5 6 7 50 47 48 5 49 8 Barb Fitting or Plug 5 Port Plate (Horizontal Mount) 9 0 48 6 4a 4 7a 53 7 3 8 0 9 50 0a 5
More informationModel E. Thermostatic Control Valves. Typical applications
Thermostatic Control Valves Model E Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationIndustrial Turbo Meters, Sizes 2" through 6"
Industrial Turbo Meters Sizes 2" through 6" TUR-UM-00530-EN-19 (October 2014) User Manual Industrial Turbo Meters, Sizes 2" through 6" User Manual CONTENTS Scope of the Manual 5 Specifications 5 Product
More informationProduct Data Sheet. Transit Time Ultrasonic Flow Meters. TFX-500w Clamp-On Meter DESCRIPTION FEATURES BENEFITS OPERATION APPLICATION
Transit Time Ultrasonic low Meters TX-500w Clamp-On Meter ECRIPTION The TX-500w transit time ultrasonic flow meter measures volumetric flow of clean water in pipes 10 in. or smaller. y clamping on the
More informationDaniel Measurement & Control - Product Training Calendar
2014 Course Calendar: Dates for North America - Houston, TX D4420 Introduction to Daniel Senior Orifice Fittings 1 Day 17 D4120 Introduction to Natural Gas Orifice Flow Measurement 3 Days 23-25 D4320 Advanced
More informationPilot Operated 2-Way Gas Valves
Pilot Operated 2-Way Gas Valves Model 2180ED - ductile iron Model 2180ES - cast steel Overview AMOT Model 2180 valves will shut off the fuel gas and vent the manifold when used on an internal combustion
More informationPotain MD. Range. Characteristics. Max. jib: 62,5 à 80,0 m Max. load: 10,0 à 40,0 t Tip load: 2,0 à 5,4 t Mast: 1,60 à 2,45 m Hoist: 33 à 150 LVF
Potain MD Range Characteristics Max. jib: 62,5 à 80,0 m Max. load: 10,0 à 40,0 t Tip load: 2,0 à 5,4 t Mast: 1,60 à 2,45 m Hoist: 33 à 150 LVF Considered to be the parent range to tower cranes, MD cranes
More informationLiquid Turbine Flowmeters
NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement In 1957, this flowmeter was developed with a tungsten-carbide shaft and bearing to withstand the rugged conditions of the oil field. Over the years,
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationUXC.COM A PUBLICATION OF. NPO Overview 1501 MACY DRIVE ROSWELL, GA PH FX
2019 A PUBLICATION OF UXC.COM NPO Overview 1501 MACY DRIVE ROSWELL, GA 30076 PH +1 770 642-7745 FX +1 770 643-2954 NOTICE UxC, LLC ( UxC ) shall have title to, ownership of, and all proprietary rights
More informationVane Pumps for Corrosive, Thin Liquids at Higher Pressures
Viking LVP Series Stainless Steel Vane Pumps Vane Pumps for Corrosive, Thin Liquids at Higher Pressures Higher pressures than other stainless positive displacement pumps Low-wear, long-life vanes Superior
More informationWORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
More informationModel H. Thermostatic Control Valves. Typical applications. Key benefits. Key features. Accreditations
Thermostatic Control Valves Model H Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationJAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES
JAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES JT series angle stem tank bottom valves provide a compact assembly with additional space for actuator clearance on insulated vessels. Large port
More information860 Tapping Machine. Features
860 Tapping Machine Tapping Sizes: 4- to 20-inches Model 860B Bulletin No: 1000.008.07 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.008.06 (8.2016) Split Frame Boring Bar Description Features
More informationUNIVERSAL. The Ultimate Performance CMM
UNIVERSAL The Ultimate Performance CMM UNIVERSAL Extruded Bridge Beam with Dovetail Guideways Ultra Rigid Advanced Alloy Platform Dynamic Wireless Thermal CMM & Part Compensation 90mm x 90mm Z Ram Cross-Section
More informationtype 122a three-way Switching Valve
Instruction Manual Form 2279 Type 122A January 2016 type 122a three-way Switching Valve! WarnIng Failure to follow these instructions or to properly install and maintain this equipment could result in
More informationKämmer Series Corrosive Application Valves
Kämmer Corrosive Application Valves 1 Introduction Optional test port NPT ¼" Anti-blowout stem design Guided stem PN 16 modified PTFE bellows seal,as standard configuration Metal to metal body/bonnet connection
More informationPotain MDT CITY. Range Brochure. Model Max. load Max. jib Tip load Mast Hoist. MDT98 6 t 55 m 1,2 t to 55 m 3,8-4,5 m 25 & 33 ch
Potain MDT CITY Range Brochure Model Max. load Max. jib Tip load Mast Hoist MDT98 6 t 55 m 1,2 t to 55 m 3,8-4,5 m 25 & 33 ch MDT128 6 t 55 m 1,6 t to 55 m 3,8-4,5 m 25, 33 & 50 ch MDT178 8 t 60 m 1,5
More informationDrive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
More informationPSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
More informationEnhanced Classic Line (ECL) Mixers PORTABLE/FIXED MOUNT MIXERS
Enhanced Classic Line (ECL) Mixers PORTABLE/FIXED MOUNT MIXERS A World Leader In Industrial Mixing Since 1923. Lightnin has over 85 years of unrivaled experience in industrial mixing technology, process
More informationLiquid Turbine Flowmeters
MEASUREMENT SYSTEMS NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and
More information3-Way Temperature Control Valve
12/06 3-Way Temperature Control Valve G Valve Typical applications Lubricating oil temperature control Jacket water cooling Charge air temperature control Central cooling Sea water cooling Key benefits
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationNational Crane Series NBT50
National Crane Series NBT50 Preliminary Product Guide Features 31,1 m (102 ft) four-section full power boom and optional 39,01 m (128 ft) five-section full power boom 45,36 t (50 USt) at 2,44 (8 ft) and
More informationBulletin: Floating Ball Valve. Tartarini Floating Ball Valve. Introduction. Features and Benefits
Tartarini Floating Ball Valve Bulletin: Floating Ball Valve May 2011 Figure 1. Tartarini Floating Ball Valve Introduction Tartarini Floating Ball Valve is a general-purpose valve. It is used for long range
More informationTriple offset technology for lower pressures.
Triple offset technology for lower pressures. Vanessa Series 30-RS Triple Offset Valves A triple offset valve designed for the specific needs of general applications in lower pressure classes. Emerson.com/FinalControl
More informationJohn Deere Power Systems
John Deere Power Systems Diesel Engines Reliable power in any environment More than 170 years ago, John Deere said, I will never put my name on a product that does not have in it the best that is in me.
More informationVersaFlow Vortex 100 Vortex Flow Meter Technical Datasheet. Specification. The all-in-one solution. Highlights. Industries.
VersaFlow Vortex 100 Vortex Flow Meter Technical Datasheet 34-VF-03-05 September 3rd, 2008 Specification The all-in-one solution The VERSAFLOW is the only vortex flowmeter with integrated pressure and
More informationKämmer Series Low Flow Valves
flowserve.com Kämmer Series 030000 Low Flow Valves Description Kämmer series 030000 low flow valves are designed for precision controlling up to PN40. The body is a precision casting for high finishing
More information