Product Data Sheet DESCRIPTION
|
|
- Robert Blair
- 5 years ago
- Views:
Transcription
1 Turbo Series Meters Models 16 (11/), 2 (), 4 (3 in.), (4 in.), 2 (6 in.), 3 (8 in.), ( in.) and 62 (1) NSF/ANSI Standards 61 and 372 Certified DESCRIPTION Turbo Series meters meet or exceed the most recent revision of AWWA Standard C71 Class II Standards and are available in a leadfree bronze alloy for sizes 11/ through in. and cast iron for 1 meters. Turbo Series meters comply with the leadfree provisions of the Safe Drinking Water Act. Sizes 11/ through in. meters are also certified to NSF/ANSI Standards 61 and 372 (Trade Designation: Turbo Series LLNS) and carry the NSF61 mark on the housing. All components of the leadfree alloy meter (housing, measuring element, seals and so on) comprise the certified system. Models 16 through 62 are designed for 11/ through 1 applications. These meters feature: Direct coupled turbine based on an exclusive in.floating rotor in. design that reduces bearing friction and associated wear and tear. Low pressure loss for improved system efficiency. Exceptional registration accuracy across low flow rate, normal operating flow rate and maximum continuous operation flow. Permanently sealed, tamperresistant register or encoder. Integral strainer option for sizes 11/ through 4 in. help protect your system from damaging debris and related downtime. Meters and encoders are compatible with AMR/AMI meter reading systems and other approved reading technologies. Applications: Turbo Series meters are designed for cold water, commercial and industrial applications where flows are consistent medium to high flows. Applications include hotels, apartment buildings, irrigations centers and manufacturing and processing plants. Turbo Series meters help reduce daytoday maintenance costs while delivering accurate and efficient performance. Operation & Performance: Direct magnetic drive is achieved when the magnet carrier is driven by a gear train coupled to the rotor. The gear train consists of two sets of gears connected by a vertical transmission shaft. One gear set is at the magnet carrier, the other is a worm gear set at the rotor shaft. When water flows into the Turbo Series meter measuring element, it contacts the multivaned rotor. The resulting rotor rotation is then transmitted by magnetic coupling to a sealed register or encoder. The direct magnetic drive is built to provides a reliable metertoregistration coupling. TamperProof Features: Unauthorized removal of the register or encoder is inhibited by the option of a tamper detection seal wire screw, TORX tamperresistant seal screw or the proprietary tamperresistant keyed seal screw. Each can be installed at the meter site or at the factory. Construction: The Turbo Series meter is constructed in compliance with ANSI and AWWA C71 standards. It consists of the following basic components: meter housing, interchangeable, unitized measuring element and permanently sealed direct reading registers or encoders. The measuring element consists of the transmission coupling, rotor, inlet and outlet straightening vanes with nose cones, and calibration ring assembly. The unique inlet and outlet straightening vanes minimize swirl from piping arrangements upstream as well as downstream. A strainer is recommended to help ensure optimal flow conditioning and protection for the measuring element. An integral strainer is available as an option for 11/ through 4 in. meter sizes. The stainless steel strainer is built into the inlet end and includes a removable cover plate to permit easy access for routine cleaning. External strainers are available in sizes through 1 To simplify maintenance, the registers or encoders and measuring elements can be removed without removing the meter housing. Interchangeability of certain parts between meters also minimizes spare parts inventory investment. Meter Installation: The meter is designed for installations where flow is in one direction only. Companion flanges for installation of meters on various pipe types and sizes are available in cast iron or NL bronze as an option. See the " Turbo Series Meters User Manual" for specific instructions. RTSDS32EN (July 216) Product Data Sheet
2 Turbo Series Meters SPECIFICATIONS Turbo Series Model Meter Flanges AWWA 12 Pound Class Typical Operating Range (% ± 1.%) Typical Low Flow (9% min.) Max. Continuous Flow Maximum Intermittent Flow Pressure Loss at Max. Continuous Flow Pressure Loss at Max. Continuous Flow: With Integral Strainer Max. Operating Pressure Max. Operating Temperature Optional Integral Strainer Optional External Strainer 16 11/ (4 mm) 2 ( mm) 4 3 in. (8 mm) 4 in. ( mm) 2 6 in. (1 mm) 3 8 in. (2 mm) in. (2 mm) Elliptical Elliptical or Round Round Round Round Round Round 4 2 gpm ( m 3 /h) 4 3 gpm ( m 3 /h) gpm ( m 3 /h) 12 gpm ( m 3 /hr) 2 2 gpm (4. 68 m 3 /h) 3 4 gpm ( m 3 /h) 7 gpm ( m 3 /h) 2. gpm (.6 m 3 /h) 2. gpm (.6 m 3 /h) 4 gpm (.9 m 3 /h) 6 gpm (1.4 m 3 /h) 12 gpm (2.7 m 3 /h) 2 gpm (4. m 3 /h) 3 gpm (6.8 m 3 /h) 16 gpm (36 m 3 /h) 2 gpm (4.4 m 3 /h) 2 gpm (4.4 m 3 /h) 3 gpm (7.4 m 3 /h) 4 gpm (2.2 m 3 /h) gpm (124.9 m 3 h) gpm (227.1 m 3 /h) 12 gpm (284 m 3 h) 2 gpm (44 m 3 /h) 2 gpm (68 m 3 /h) 3 gpm (79 m 3 /h) 4 gpm (22 m 3 /h) gpm (12 m 3 /h) 7 gpm (19 m 3 h) 62 1 (3 mm) Round AWWA 12 lb class 9 88 gpm ( m 3 /h) 6 gpm (14.8 m 3 /h) 62 gpm (148 m 3 /h) 88 gpm (1988 m 3 /h) 3.8 psi (.26 bar) 3.1 psi (.21 bar) 1.8 psi (.12 bar) 7.3 psi (. bar) 4.8 psi (.33 bar) 2. psi (.17 bar) 1.6 psi (.11 bar).8 psi (. bar) 9.9 psi (.68 bar) 8.3 psi (.7 bar) psi (.43 bar) 17.8 psi (1.2 bar) Built into inlet end. Removable cover plate permits access to strainer for cleaning. 1 psi ( bar) 12 F (49 C) Available for Models 2, 4,, 2, 3, and 62. Test Plug Standard with integral strainer; optional for other models. Optional for Models 2 and 3. MATERIALS Meter Housing Turbo Head Nose Cone & Straightening Vanes Rotor Rotor Radial Bearings Rotor Thruster Bearing Rotor Bearing Pivots Calibration Mechanism Magnet Trim Housing & Cover Optional Strainer and Trim Leadfree alloy (EXCEPTION: Model 62 meter housing is blue epoxycoated cast iron) Leadfree alloy Thermoplastic Thermoplastic Lubricated thermoplastic Sapphire jewels Passivated 316 stainless steel Stainless steel & thermoplastic Ceramic Stainless steel Thermoplastic or bronze Stainless steel Page 2 RTSDS32EN July 216
3 Product Data Sheet REGISTERS / ENCODERS Standard SweepHand Registration The standard register is a straightreading, permanently sealed magnetic drive register. Dirt, moisture, tampering and lens fogging problems are eliminated. The register has a sixodometer wheel totalization display, 36 test circle with center sweep hand, and flow finder to detect leaks. gearing is made of selflubricating engineered polymer, which minimizes friction and provides long life. The multiposition register simplifies meter installation and reading. The register capacity for the 11/,, 3 in. and 4 in. meters is,, gallons (,, ft 3, 1,, m 3 ). The register capacity for the 6 in., 8 in., and in. meters is 1,,, gallons (,, ft 3,,, m 3 ). The highflow register capacity for the 1 meter is,,, gallons (1,,, ft 3,,, m 3 ). s for 11/,, 3 in. and 4 in. Meters T16 11/2" Gallons T16 11/2" Cubic Feet ,8 6489,7,9,6 T16 11/2" m 3,,1,4,2,3 Sweep Hand Revolution Meter Model Gallon Cubic Feet Cubic Meter s for 6 in., 8 in. and in. Meters T2 6" Gallons T2 6" Cubic Feet T2 6" m Sweep Hand Revolution Meter Model Gallon Cubic Feet Cubic Meter 2 3 s for 1 Meters T62 12" Gallons T62 12" Cubic Feet T62 12" m Sweep Hand Revolution Meter Model Gallon Cubic Feet Cubic Meter Optional Encoders for AMR/AMI Reading Solutions AMR/AMI solutions are available for all Disc Series meters. All reading options can be removed from the meter without disrupting water service. encoders provide years of reliable, accurate readings for a variety of applications and are also available prewired to approved AMR/AMI solutions. See details at July 216 RTSDS32EN Page 3
4 Turbo Series Meters PHYSICAL DIMENSIONS OF METERS WITHOUT STRAINER D NPT Test Port & Test Plug (11/ ) C F B A Figure 1: Sample Illustration from 8 in. Model 3 Turbo Series Model Meter Flanges Meter & Pipe Size Net Weight Shipping Weight Qty. of Bolts NPT Test Port & Test Plug (optional) Length (A) Width (B ) Height (C) Flange (D) Bolt Circle (E) Centerline (F) / Elliptical 11/ (4 mm) 14.3 lb (6. kg) 16.8 lb (7.6 kg) Elliptical ( mm) 14.9 lb (6.8 kg) 16.4 lb (7.4 kg) Round 3 in. Round 4 in. Round 6 in. Round 8 in. Round ( mm) 17.4 lb (7.9 kg) 18.9 lb (8.6 kg) 3 in. (8 mm) 31 lb (14.1 kg) 34 lb (1.4 kg) 4 in. ( mm) 4 lb (18.1 kg) 4 lb (2.4 kg) 6 in. (1 mm) 77 lb (3 kg) 89 lb (4.4 kg) 8 in. (2 mm) 123 lb (.7 kg) 147 lb (66.6 kg) in. Round in. (2 mm) 2 lb (9.3 kg) 23 lb (6.6 kg) 1 Round 1 (3 mm) 262 lb (118.8 kg) 286 lb (129.7 kg) in. (2.4 mm) 13 in. (33 mm) 7/3 (133 mm) 69/3 (19 mm) 1/64 in. (2 mm) 4 in. (2 mm) 127/32 in. (47 mm) 11/ (4 mm) in. (24 mm) 27/3 (148 mm) 61/ (16 mm) 2/3 (2 mm) 41/ (114 mm) 21/16 in. (2 mm) 11/ (4 mm) in. (24 mm) 6 in. (12 mm) 73/3 (18 mm) /8 in. (16 mm) 43/4 in. (121 mm) 2/8 in. (67 mm) ( mm) 1 (3 mm) 71/ (191 mm) 811/16 in. (22 mm) 3/4 in. (19 mm) 6 in. (12 mm) 311/3 (8 mm) ( mm) 14 in. (36 mm) 9 in. (229 mm) 921/3 (24 mm) 13/16 in. (21 mm) 71/ (191 mm) 4/16 in. (9 mm) ( mm) 18 in. (47 mm) 11 in. (28 mm) 13/16 in. (338 mm) 7/8 in. (22 mm) 91/ (241 mm) 1/4 in. (133 mm) ( mm) (8 mm) 131/ (343 mm) 13/16 in. (38 mm) 1 in. (2 mm) 113/4 in. (298 mm) 63/8 in. (162 mm) 26 in. (66.4 mm) 16 in. (46.4 mm) 171/3 (443 mm) 11/16 in. (27 mm) 141/4 in. (362 mm) 77/8 in. (199.4 mm) 1911/16 in. ( mm) 19 in. (482 mm) 1911/16 in. ( mm) 1.26 in. (32 mm) 17 in. (432 mm) 87/8 in. (226 mm) Page 4 RTSDS32EN July 216
5 Product Data Sheet PHYSICAL DIMENSIONS OF METERS WITH INTEGRAL STRAINER Figure 2: Physical dimensions Turbo Series Model Meter Flanges Elliptical Elliptical Round Round Round Meter & Pipe Size 11/ (4 mm) ( mm) ( mm) 3 in. (8 mm) 4 in. ( mm) Net Weight 14.3 lb (6. kg) 24 lb (11 kg) 26 lb (12 kg) 49 lb (22 kg) 6 lb (27.22 kg) Shipping Weight 16.8 lb (7.6 kg) 28 lb (13 kg) 3 lb (14 kg) lb (2 kg) 7 lb (31.7 kg) Number of Bolts NPT Test Port & Test Plug (Standard) 1 in. (2.4 mm) 11/ (4 mm) 11/ (4 mm) ( mm) ( mm) Length (A) 13 in. (33 mm) 17 in. (432 mm) 17 in. (432 mm) 19 in. (483 mm) 23 in. (84 mm) Width (B ) 7/3 (133 mm) 27/3 (148 mm) 6 in. (12 mm) 71/ (191 mm) 9 in. (229 mm) Height (C) 69/3 (19 mm) 61/ (16 mm) 73/3 (18 mm) 81/16 in. (227 mm) 921/3 (24 mm) Flange (D) 1/64 in. (2 mm) 27/3 (47 mm) /8 in. (16 mm) 27/3 (21 mm) 13/16 in. (21 mm) Bolt Circle (E) 4 in. (2 mm) 41/ (114 mm) 43/4 in. (121 mm) 6 in. (12 mm) 71/ (191 mm) Centerline (F) 127/3 (47 mm) 21/16 in. (2 mm) 2/8 in. (67 mm) 319/3 (91 mm) 4/16 in. (9 mm) July 216 RTSDS32EN Page
6 Turbo Series Meters PRESSURE LOSS CHART FOR METERS WITHOUT STRAINER Rate of flow in gallons per minute (gpm) Pressure Loss P.S.I PRESSURE LOSS CHART FOR METERS WITH INTEGRAL STRAINER Rate of flow in gallons per minute (gpm) Pressure Loss P.S.I Page 6 RTSDS32EN July 216
7 Product Data Sheet ACCURACY CHARTS FOR METERS WITHOUT STRAINER Rate of flow in gallons per minute (gpm) 11/ Meter Meter in. Meter 4 in. Meter July 216 RTSDS32EN Page 7
8 Turbo Series Meters ACCURACY CHARTS FOR METERS WITHOUT STRAINER (CONTINUED) Rate of flow in gallons per minute (gpm) 6 in. Meter Undar 8 in. Meter in. Meter Meter Page 8 RTSDS32EN July 216
9 Product Data Sheet ACCURACY CHARTS FOR METERS WITH INTEGRAL STRAINER Rate of flow in gallons per minute (gpm) 1 11/ Meter Meter OO in. Meter 4 in. Meter July 216 RTSDS32EN Page 9
10 Turbo Series Meters INTENTIONAL BLANK PAGE Page RTSDS32EN July 216
11 Product Data Sheet INTENTIONAL BLANK PAGE July 216 RTSDS32EN Page 11
12 Turbo Series Meters Making Water Visible MAKING WATER VISIBLE and RECORDALL are registered trademarks of, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, reserves the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists. 216, Inc. All rights reserved. The Americas 44 West Brown Deer Rd PO Box 2436 Milwaukee, WI México de las Americas, S.A. de C.V. Pedro Luis Ogazón N 32 Esq. Angelina N 24 Colonia Guadalupe Inn CP México, DF México Europe, Middle East and Africa Europa GmbH Nurtinger Str Neuffen Germany Europe, Middle East Branch Office Europe PO Box Dubai Silicon Oasis, Head Quarter Building, Wing C, Office #C29 Dubai / UAE Czech Republic Czech Republic s.r.o. Maříkova 282/ Brno, Czech Republic Slovakia Slovakia s.r.o. Racianska 9/B Bratislava, Slovakia Asia Pacific 8 Marine Parade Rd 214 Parkway Parade Singapore China Hangzhong Road Minhang District Shanghai China Switzerland I Swiss AG I Mittelholzerstrasse 8 I 36 Bern I Switzerland I Legacy Document Numbers: RTST11/ and 12; RTSTI 11/2, 2, 3, and 4
Product Data Sheet DESCRIPTION
Turbo Series Meters Models 16 (11/2"), 2 (2"), 4 (3"), (4"), 2 (6"), 3 (8"), ("), & 62 (12"); NSF/ANSI Standards 61 and 372 Certified DESCRIPTION Turbo Series meters meet or exceed the most recent revision
More informationProduct Data Sheet. Recordall Disc Meters. Lead-Free Bronze Alloy, Sizes 5/8", 5/8" x 3/4", 3/4" & 1" NSF/ANSI Standards 61 and 372 Certified
Recordall Disc Meters LeadFree Bronze Alloy, Sizes /8", /8" x 3/4", 3/4" & " NSF/ANSI Standards 6 and 372 Certified LP /8", /8" 3/4" 2 /8", /8" 3/4" 3 3/4" " 7 " DESCRIPTION The Recordall Disc Series meters
More informationProduct Data Sheet. Recordall Disc Meters. Lead-Free Bronze Alloy, Sizes 5/8, 5/8 x 3/4, 3/4 & 1 inch NSF/ANSI Standards 61 and 372 Certified
Recordall Disc Meters LeadFree Bronze Alloy, Sizes /8, /8 x 3/4, 3/4 & inch NSF/ANSI Standards 6 and 372 Certified 2 /8 in., /8 3/4 in. 3 3/4 in. in. 7 in. DESCRIPTION The Recordall Disc Series meters
More informationProduct Data Sheet. Recordall Fire Series Assemblies (FSAA) Cold Water Meter & Strainer with Disc Bypass DESCRIPTION
Fire Series Assemblies (FSAA) Cold Water Meter & Strainer with Disc Bypass UL Certified & FM Standard Approved for Fire Service Applications NSF/ANSI Standards and Certified DESCIPTION Fire Series assemblies
More informationProduct Data Sheet. Recordall Fire Series Assembly (FSAA) Cold Water Meter & Strainer with Turbine Bypass DESCRIPTION
Fire Series Assembly (FSAA) Cold Water Meter & Strainer with Turbine Bypass UL Certified & FM Standard Approved for Fire Service Applications NSF/ANSI Standards and Certified DESCIPTION Fire Series assemblies
More informationParts List. Recordall Turbo Series Meters
Recordall Turbo Series Meters Models 160 (1-1/ in.), 00 ( in.), 450 (3 in.), 1000 (4 in.), 000 (6 in.), 3500 (8 in.), 5500 (10 in.), 600 (1 in.) Models without Integral Strainers, Sizes 1-1/ 1 in. Models
More informationProduct Data Sheet. Industrial Oval Gear. Inline and Flanged Meters, 1/2", 3/4", 1", 1" HF, 1-1/2", 2", 3" DESCRIPTION OPERATING PRINCIPLE
Industrial Oval Gear Inline and Flanged Meters, 1/2", 3/4", 1", 1" HF, 1-1/2", 2", 3" DESCRIPTION The Badger Meter Industrial Oval Gear Meter, Model IOG is a modular flow meter design, economical yet highly
More informationProduct Data Sheet. Turbine Flow Meter. QuikSert DESCRIPTION INSTALLATION FEATURES REPAIR KITS
DESCRIPTION Turbine Flow Meter QuikSert The QuikSert in-line turbine flow meter was developed for liquid applications where accuracy and dependability are needed. QuikSert s stainless steel body incorporates
More informationVariable Area Flow Meters and Flow Switches. Easy-to-Use and Reliable Flow Measurement.
Variable Area and Flow Switches Easy-to-Use and Reliable Flow Measurement. Variable Area and Flow Switches The Hedland product line features over 15,000 inline, variable area flow meters to measure oil,
More informationRecordall Combo Meter Lead-Free Bronze Alloy, Size 8" (DN 200) NSF/ANSI Standards 61 and 372 Certified RCO-UM EN-02 (October 2013) User Manual
Recordall Combo Meter Lead-Free Bronze Alloy, Size 8" (DN 200) NSF/ANSI Standards 61 and 372 Certified RCO-UM-00077-EN-02 (October 2013) User Manual Recordall Combo Meter, 8" Page ii October 2013 User
More informationProduct Data Sheet. Flow Sensors. Insert Style Flow Sensors SDI Series DESCRIPTION HOT TAP SENSORS (OPTIONAL) APPLICATIONS FUNCTIONALITY
DESCRIPTION Flow Sensors Insert Style Flow Sensors SDI Series The Data Industrial SDI Series insert flow sensors from Badger Meter offer accurate liquid flow measurement in closed pipe systems in an easy
More informationAutomotive Flow Measurement and Control Products
Automotive Flow Measurement and Control Products Control. Manage. Optimize. Automotive Flow Measurement and Control Products When every drop counts, choose automotive flow measurement and control products
More informationUser Manual. Recordall Compound Series Meter. Lead-Free Bronze Alloy, Sizes 2", 3", 4" & 6" NSF/ANSI Standards 61 and 372 Certified
Recordall Compound Series Meter Lead-Free Bronze Alloy, Sizes 2", 3", 4" & 6" NSF/ANSI Standards 61 and 372 Certified RCS-UM-00076-EN-04 (June 2016) User Manual Recordall Compound Series Meter, Lead-Free
More informationControl Valves. Type HP-10, 10,000 PSI. User Manual. RCV-UM EN-01 (August 2014)
Control Valves Type HP-10, 10,000 PSI RCV-UM-01034-EN-01 () User Manual Control Valves Type HP-10, 10,000 PSI Page ii User Manual CONTENTS Overview...........................................................................
More informationProduct Data Sheet. VN2000 Flow Meters. Compact Insertion Meter DESCRIPTION BENEFITS APPLICATIONS INSTALLATION
VN2000 Flow Meters Compact Insertion Meter DESCRIPTION The VN2000 Compact Insertion Vortex Flow Meter measures the volumetric or mass flow rate or BTU/energy of steam, gas or liquids over a large flow
More informationUser Manual. Ellipse Pitot Tube Meter. PFA Fire Pump System. PTT-UM EN-03 (March 2017) 2500 GPM 3000 F M
Ellipse Pitot Tube Meter PFA Fire Pump System 500 GPM 3000 000 3500 1500 1000 PFA-XXX X inch 50 SWP X/XX S/N AXXXXXXX 4000 METERS PTT-UM-0053-EN-03 () User Manual Ellipse Pitot Tube Meter, PFA Fire Pump
More informationTurbine Flow Meter. Model User Manual. TRB-UM EN-03 (December 2015)
Turbine Flow Meter Model 1200 TRB-UM-00290-EN-03 () User Manual Turbine Flow Meter, Model 1200 CONTENTS Scope of This Manual 3 Unpacking and Inspection 3 Safety 3 Terminology and Symbols 3 Considerations
More informationProduct Data Sheet. VN2000 Flow Meters. Wafer Plate Inline Meter DESCRIPTION BENEFITS OPERATION APPLICATIONS SIZING SOFTWARE
VN2000 Flow Meters Wafer Plate Inline Meter DESCRIPTION The VN2000 Wafer Plate Inline Flow Meter measures the volumetric or mass flow rate or BTU/energy of steam, gas or liquids over a large flow range.
More informationProduct Data Sheet. VN2000 Flow Meters. Hot Tap Insertion Meter DESCRIPTION BENEFITS APPLICATIONS INSTALLATION OPERATION SIZING SOFTWARE
VN2000 Flow Meters Hot Tap Insertion Meter DESCRIPTION The VN2000 Hot Tap Insertion Vortex Flow Meter measures the volumetric flow, mass flow rate or BTU/energy of steam, gas or liquids over a large flow
More informationIndustrial Turbo Meters. Sizes 2 in. through 6 in. User Manual. TUR-UM EN-21 (October 2017)
Industrial Turbo Meters Sizes 2 in. through 6 in. TUR-UM-00530-EN-21 () User Manual Industrial Turbo Meters, Sizes 2 in. through 6 in. Page ii TUR-UM-00530-EN-21 User Manual CONTENTS Scope of the Manual
More informationBIN & SEN Annular Pitot Tube Flow Meter. Form: 10-PTT-UM (December 2012) Installation & Operation Manual
BIN & SEN Annular Pitot Tube Flow Meter Form: 1-PTT-UM-349 (December 212) Installation & Operation Manual Installation Instructions 1. The primary station can be installed in any position on vertical or
More informationApplication Data Sheet. Chemical Compatibility Chart. IND-AS EN-01 (May, 2014) Metals Plastics Seals KEY. Good. Fair. Ethylene Propylene.
Chemical Compatibility Chart 6 Stainless Acetic Acid Acetone Acetylene Acidic Mine Water Acrylonitrile Ammonium Chloride Ammonium Hydroxide Ammonium Sulfate Ammonium Thio-Sulfate Anhydrous Ammonia Anhydrous
More informationProduct Data Sheet. VN2000 Flow Meters. Hot Tap Insertion Meter DESCRIPTION BENEFITS APPLICATIONS INSTALLATION OPERATION SIZING SOFTWARE
VN2000 Flow Meters Hot Tap Insertion Meter DESCRIPTION The VN2000 Hot Tap Insertion Vortex Flow Meter measures the volumetric flow, mass flow rate or BTU/energy of steam, gas or liquids over a large flow
More informationProduct Data Sheet. Turbine Flow Meter. B16D Series FloClean Sanitary DESCRIPTION INSTALLATION REPAIR KITS
DESCRIPTION Turbine Flow Meter The FloClean Sanitary turbine flow meter was developed for use in the food, beverage and pharmaceutical industries. The 36L stainless steel construction provides a durable
More informationU500w Ultrasonic Meter. Cold Water Meters. User Manual. ESM-UM EN-04 (September 2017)
U500w Ultrasonic Meter Cold Water Meters ESM-UM-02205-EN-04 () User Manual U500w Ultrasonic Meter CONTENTS About the U500w Ultrasonic Meter 3 Safety Information 3 Product Unpacking and Inspection 3 Meter
More informationUser Manual. Industrial Meters. Oscillating Piston, Sizes 1/2", 1" and 2" Model OP Sanitary (3A Approved) and Model OP Chemical
Industrial Meters Oscillating Piston, Sizes 1/2", 1" and 2" Model OP Sanitary (3A Approved) and Model OP Chemical OPM-DS-00291-EN-03 () User Manual Industrial Meters, Oscillating Piston, Sizes 1/2", 1"
More informationWATER METER MATERIAL & ORDER INFORMATION
WATER METER MATERIAL & ORDER INFORMATION Supplier Contact: National Meter & Automation, Inc. PO Box 8339 2250 Apollo Way #300 Santa Rosa, CA 95407 Kathy Richards Phone 707/575 0700 Fax 707/575 3786 Toll
More informationElectronic Preset Meter. Model EPM2-ADV-SF, Advanced Series, Special Fluids. User Manual. AUT-UM EN-05 (August 2015)
Electronic Preset Meter Model EPM2-ADV-SF, Advanced Series, Special Fluids AUT-UM-00916-EN-05 () User Manual Electronic Preset Meter, Model EPM2-ADV-SF, Advanced Series, Special Fluids Page ii AUT-UM-00916-EN-05
More informationProduct Data Sheet. Positive Displacement Flow Meter B1750 DESCRIPTION
ESRIPTION Positive isplacement Flow Meter 175 The lancett Model 175 positive displacement flow meter provides high measurement accuracy, trouble-free operation and long service life for fluids over a wide
More informationIndustrial Meters. Oscillating Piston, Model OP Chemical & Sanitary, Sizes 1/2", 1", 2" User Manual. OPM-UM EN-02 (August 2013)
Industrial Meters Oscillating Piston, Model OP Chemical & Sanitary, Sizes 1/2", 1", 2" OPM-UM-00291-EN-02 (August 2013) User Manual Industrial Meter, Oscillating Piston, Sizes 1/2" through 2" Model OP
More informationModel 200 Multi-Jet Flow Meter. 02-PDM-UM (July 2012) Installation & Operation Manual
Model 200 Multi-Jet Flow Meter 02-PDM-UM-00109 (July 2012) Installation & Operation Manual TABLE OF CONTENTS Introduction...3 Operating Principle...3 Specifications...4 Operating Limitations...5 Installation
More informationProduct Data Sheet. Electronic Valve Actuator. SEVA (Smart Electronic Valve Actuator) DESCRIPTION FEATURES APPROVALS / RATINGS OPERATION
Electronic Valve ctuator SEV (Smart Electronic Valve ctuator) DESCRIPTION The SEV is our next generation Smart Electric Valve ctuator that provides our customers with an electric actuator with best-in-class
More informationTurbine Flow Meter. B16N Series FloClean Tri-Clover End Fitting. User Manual. TRB-UM EN-01 (December 2016)
Turbine Flow Meter B16N Series FloClean Tri-Clover End Fitting TRB-UM-02253-EN-01 () User Manual Turbine Flow Meter, B16N Series FloClean Tri-Clover End Fitting CONTENTS Scope of This Manual 3 Unpacking
More informationModel Horizon. Horizon. Horizontal Turbine Meters Sizes 1-1/2" through 10" NOTICE OF DISCONTINUATION, Effective October 2011
Model tal Turbine Meters Sizes 1-1/2" through 10" NOTICE OF DISCONTINUATION, Effective October 2011 Mueller Systems has discontinued new sales of our meter line in an effort to introduce new metrology
More informationTurbine Flow Meter B1500. User Manual. TRB-UM EN-02 (June 2016)
Turbine Flow Meter B1500 TRB-UM-01789-EN-02 () User Manual Turbine Flow Meter, B1500 Page ii TRB-UM-01789-EN-02 User Manual CONTENTS Safety information 5 Safety Symbol Explanations 5 Unpacking & Inspection
More informationTurbine Flow Meter. User Manual. Top Load 1 in. and 2 in. Meters. TRB-UM EN-01 (September 2018)
Turbine Flow Meter Top Load 1 in. and 2 in. Meters TRB-UM-02597-EN-01 () User Manual Turbine Flow Meter, Top Load 1 in. and 2 in. Meters CONTENTS Unpacking and Inspection.........................................
More informationProduct Data Sheet. Flow Monitor. B2800 Series DESCRIPTION OPERATION FEATURES
Flow Monitor 2800 Series SRIPTION The 2800 flow monitor is designed to be comprehensive, user-friendly, flexible and cost efficient. This microprocessor-based display comes pre-calibrated when purchased
More information500 Series DI. 500 Series DI. Materials and Specifications. Magnetic Drive Positive Displacement Disc Meters Sizes 1-1/2 and 2. Features.
Features APPLICATIONS: Measurement of cold water for residential, commercial and industrial applications where water volumes are low, and low flow sensitivity is important. CONFORMANCE TO STANDARDS: Hersey
More information400 Series IIS Magnetic Drive Positive Displacement Disc Meters Sizes 5/8-3/4-1
Sizes 5/8 3/4 1 Features APPLICATIONS: Measurement of cold water for residential and small commercial applications where water volumes are low, and low flow sensitivity is important. CONFORMANCE TO STANDARDS:
More informationProduct Data Sheet. Turbine Flow Meters. Precision Series DESCRIPTION CALIBRATIONS APPLICATIONS
Turbine Flow Meters Precision Series DESRIPTION ox Precision Turbine Flow Meters have unprecedented mechanical linearity, resulting in minimizing, or negating, temperature induced viscosity influence.
More informationProduct Data Sheet. Exact Dual Rotor. Turbine Flow Meters DESCRIPTION CALIBRATIONS APPLICATIONS
Exact Dual Rotor Turbine Flow Meters DESRIPTION The ox Exact Dual Rotor Turbine Flow Meter is the pinnacle of turbine meter technology that delivers results not attainable with single rotor designs. The
More informationVN2000 Flow Meters. Hot Tap Insertion Meter. User Manual. VRX-UM EN-03 (April 2018)
VN2000 Flow Meters Hot Tap Insertion Meter VRX-UM-02217-EN-03 () User Manual VN2000 Flow Meters, Hot Tap Insertion Meter Page 2 VRX-UM-02217-EN-03 User Manual CONTENTS Purpose of this Document................................................................
More informationPFM Portable Hydraulic Testers. PFM6, PFM6BD and PFM8. User Manual. TUR-UM EN-02 (August 2014)
PFM Portable Hydraulic Testers PFM6, PFM6BD and PFM8 TUR-UM-73-EN-2 () User Manual PFM Portable Hydraulic Testers, PFM6, PFM6BD and PFM8 CONTENTS Introduction.........................................................................iii
More informationModel MVR. Model MVR. Materials and Specifications. Magnetic Drive Vertical Turbine Meters Sizes 3/4", 1", 1-1/2", 2", 3", 4" and 6" Features
Magnetic Drive Vertical Turbine Meters Sizes 3/4", 1", 11/2", 2", 3", 4" and 6" Features APPLICATIONS: Measurement of water for residential, commercial, industrial and residential fire applications, where
More informationVariable Area Flow Meters. Inline Pneumatic Flow Meter. User Manual. VAM-UM EN-02 (August 2014)
Variable Area Flow Meters Inline Pneumatic Flow Meter VAM-UM-00593-EN-02 () User Manual Variable Area Flow Meters, Inline Pneumatic Flow Meter CONTENTS Introduction.........................................................................
More informationFM 3. FM 3 with Bypass. Materials and Specifications. Fire Service Meter with Bypass Sizes 3, 4, 6, 8, 10. Features
Features APPLICATIONS: The Hersey Meters FM 3 fire service meter is designed for combined fire service and domestic water where a single supply line supports both fire and domestic or process needs. The
More informationOMNI Compound Water Meter
OMNI Compound Water Meter 1-1/2, 2, 3, 4, 6, 8 and 10 OMNI C 2 Meter The OMNI Compound Water Meter (C 2 ) operation is based on advanced Floating Ball Technology (FBT). DESCRIPTION: Floating Ball Technology
More informationInstallation & Operation Manual. Impeller Flow Sensors. IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE.
Impeller Flow Sensors 250 and 228 Metal Tee IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE. 872021-EN (August 2012) Rev. 8 Installation & Operation Manual 250 and 228
More informationo-ring, testing port and a convenient integral strainer.
OMNI TM T 1-1/,, 3,,, and OMNI T Meter Description 1-1/,, 3,,, and Sizes The OMNI T meter operation is based on advanced Floating Ball Technology (FBT). Totalization Mode AMR/AMI Mode Resettable Test Mode
More informationsure o-ring, testing port and a convenient integral strainer. OMNI ELECTRONIC REGISTER
DS-W-OMT---11-3-A OMNI T TM 1-1/,, 3,,, and OMNI T Meter Description 1-1/,, 3,,, and Sizes The OMNI T meter operation is based on advanced Floating Ball Technology (FBT). Totalization Mode AMR/AMI Mode
More informationmaincase using a high pressure o-ring, testing port and an AWWA compliant strainer.
DS-W-OMC---11-3-A OMNI TM C 1-1/,, 3,,, and OMNI C Meter Description 1-1/,, 3,,, and Sizes The OMNI C meter operation is based on advanced Floating Ball Technology (FBT). Totalization Mode Features AMR/AMI
More informationSection G: Brass Service Materials
G 1 G 2 G 3 G 3.1 G 3.2 G 4 G 4.1 G 5 G 6 G 7 Inline Valves Straight Couplings Meter Setters (5/8" X 3/4" Meter) Meter Setters (1" Meter) Meter Setters (1 1/2"& 2 Meter) Dual Service U-Branch (5/8" X 3/4"
More informationFlow-Alert. Flow Switch GPM LPM OIL FLOW-ALERT FLOW SWITCH 6000 PSI / 414 BARS MAX. User Manual. VAM-UM EN-02 (September 2014)
Flow-Alert Flow Switch GPM LPM OIL FLOW-ALERT FLOW SWITCH 6 PSI / 414 BARS MAX VAM-UM-646-EN-2 () User Manual Coriolis Flow Meter, Flow Switch CONTENTS Introduction.........................................................................
More informationIMPORTANT!!!! Read this manual before attempting any installation, wiring or operation.
Industrial Turbo Meters Sizes 2" through 6" Installation & Operation Manual IMPORTANT!!!! Read this manual before attempting any installation, wiring or operation. BadgerMeter,Inc. IOM-003-15 Part No.
More informationLiquid Turbine Flowmeters
NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement In 1957, this flowmeter was developed with a tungsten-carbide shaft and bearing to withstand the rugged conditions of the oil field. Over the years,
More informationFlow Sensors. Series 228PV PVC Tee Type Flow Sensors. User Manual. SEN-UM EN-10 (February 2018)
Flow Sensors Series 228PV PVC Tee Type Flow Sensors SEN-UM-01664-EN-10 () User Manual Flow Sensors, PVC Tee Type Flow Sensors CONTENTS Introduction.........................................................................
More informationUser Manual. Intrinsically Safe Flow Meters. RWG/RWBG Wafer Style Flow Meters RNG Insertion Style Flow Meters. VRX-UM EN-03 (October 2014) Flow
Intrinsically Safe Meters RWG/RWBG Wafer Style Meters RNG Insertion Style Meters FLOW VRX-UM-00374-EN-03 () User Manual Intrinsically Safe Meters, RWG/RWBG Wafer Style Meters & RNG Insertion Style Meters
More informationLiquid Turbine Flowmeters
MEASUREMENT SYSTEMS NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and
More informationPropeller Meters. Flow measurement solutions for water and wastewater
Propeller Meters Propeller Meters Flow measurement solutions for water and wastewater Perfect flow measurement solutions Water Specialties Propeller Meters are designed and manufactured with precise techniques
More informationIndustrial Turbo Meters, Sizes 2" through 6"
Industrial Turbo Meters Sizes 2" through 6" TUR-UM-00530-EN-19 (October 2014) User Manual Industrial Turbo Meters, Sizes 2" through 6" User Manual CONTENTS Scope of the Manual 5 Specifications 5 Product
More informationThermostatic Control Valves
Thermostatic Control Valves Model H Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationPFM Portable Hydraulic Testers. PFM6, PFM6BD, and PFM8. Badger Meter. Installation & Operation Manual. 05-TUR-UM EN (September 2012)
PFM Portable Hydraulic Testers PFM6, PFM6BD, and PFM8 Badger Meter 5-TUR-UM-193-EN (September 12) Installation & Operation Manual Page ii September 12 CONTENTS INTRODUCTION 5 PFM6 Digital Hydraulic Tester
More informationVortex Flow Meters. Shedding Flow Meter RVL Series. User Manual. VRX-UM EN-03 (April 2017)
Vortex Meters Shedding Meter RVL Series VRX-UM-00371-EN-03 () User Manual Vortex Meters, Shedding Meter Page ii VRX-UM-00371-EN-03 March 2017 User Manual CONTENTS Description 5 Operating Principle 5 Fluids
More informationY610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
More informationTURBINE METERS - WP Series
TURBINE METERS - WP Series Operating Pressure 150 psi Maximum Operating Temperature Cold Water 105 F (40 ) 3 Layers Epoxy Coating SIZE 2" 3" 4" 6" 8" Max. Flow Rate GPM 400 850 1100 2600 4400 Transition
More informationVane Pumps for Corrosive, Thin Liquids at Higher Pressures
Viking LVP Series Stainless Steel Vane Pumps Vane Pumps for Corrosive, Thin Liquids at Higher Pressures Higher pressures than other stainless positive displacement pumps Low-wear, long-life vanes Superior
More informationPrecision Flow Measurement Solutions. Test and Measurement
Precision Flow Measurement Solutions Test and Measurement Introduction Badger Meter is a leading innovator, manufacturer and marketer of flow measurement and control products, serving water and gas utilities,
More informationT205VB Series Tank Blanketing Vacuum Breakers
February 2014 T205VB Series Tank Blanketing Vacuum Breakers Figure 1. Typical T205VB Series Vacuum Breaker Introduction The T205VB Series vacuum breakers (Figure 1) are used for precise control of small
More informationModel H. Thermostatic Control Valves. Typical applications. Key benefits. Key features. Accreditations
Thermostatic Control Valves Model H Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationBARTON 7000 Series Liquid Turbine Meters
TECHNICAL SPECIFICATIONS BARTON 7000 Series Liquid Turbine Meters Cameron s BARTON 7000 series turbine meters are designed for a broad range of precise liquid measurement applications. Based on more than
More informationModel J. Thermostatic Control Valves. Typical applications. Key benefits. Key features. Accreditations available
Thermostatic Control Valves Model J Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationMADE IN THE USA BACKFLOW PREVENTERS
MADE IN THE USA BACKFLOW PREVENTERS TABLE OF CONTENTS Selection Guide........................................................................3 Double Check Valve (Series 40-100)......................................................4,5
More informationSelf-Operating Temperature Regulators
Self-Operating Temperature Regulators Remote Bulb for Heating, Cooling, Mixing and By-Pass Applications Powers # Regulators With Powers # Self-Operating Temperature Regulators, you no longer need external
More informationZTM AND ZTMB ZENNER TURBINE METERS INSTALLATION, MAINTENANCE AND SERVICING
ZTM AND ZTMB ZENNER TURBINE METERS INSTALLATION, MAINTENANCE AND SERVICING INSTALLATION 1. The meter is intended for measuring potable, cold water in one direction. 2. The meter is to be installed in a
More informationProduct Data Sheet. Coriolis Flow Meter RCT1000 DESCRIPTION APPLICATIONS MAINTENANCE OPERATION FLUID DIAGNOSTICS ADVANTAGES
oriolis Flow Meter ESRIPTION RT1000 The RT1000 oriolis mass flow meter identifies flow rate by directly measuring mass flow and density of fluids over a wide range of process temperatures with a high degree
More informationTurbine Flow Sensors. Activa, Ultima, Classic and Quad. User Manual. SEN-UM EN-02 (March 2015)
Turbine Flow Sensors ctiva, Ultima, Classic and Quad SEN-UM-00987-EN-02 () User Manual Turbine Flow Sensors, ctiva, Ultima, Classic and Quad Page 2 User Manual CONTENTS Introduction.........................................................................
More informationPilot Operated 2-Way Gas Valves
Pilot Operated 2-Way Gas Valves Model 2180ED - ductile iron Model 2180ES - cast steel Overview AMOT Model 2180 valves will shut off the fuel gas and vent the manifold when used on an internal combustion
More informationType MR108 Direct-Operated Backpressure Regulators
August 2013 Type MR108 Direct-Operated Backpressure Regulators P1202 P1203 TYPE MR108 WITH LOW- ACTUATOR TYPE MR108 WITH HIGH- ACTUATOR Figure 1. Type MR108 Direct-Operated Backpressure Regulators Contents
More informationModel E. Thermostatic Control Valves. Typical applications
Thermostatic Control Valves Model E Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationflowserve.com Kämmer Multi-Z Kämmer Multi-Z Severe Service Valves
flowserve.com Severe Service Valves 1 Introduction Solids and cavitation completely under control Users from the power generation, petrochemical and industrial chemicals industries are frequently confronted
More information100H, 150H, 225H, 275H
TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the
More informationPractical Guidelines for Specifying Orifice Fittings
Daniel White Paper February 2015 - Page 1 Practical Guidelines for Specifying Orifice Fittings This white paper provides detailed information on how to correctly specify an orifice fitting to meet oil
More informationMULTI-JET WATER METERS
MULTI-JET WATER METERS INSTALLATION INSTRUCTIONS General Information Technical Data 3 Features 3 Applications 3 Dimensions 3 Pulse Rate 3 Pressure Loss Curve 3 Shipping Weight 3 Installation Position 4
More informationLiquid Turbine Flowmeters
NuFlo Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and bearing to withstand
More informationTYPE PC Propeller Condensate Pumps
SHIPPENSBURG PUMP CO. INC. P.O. BOX 279, SHIPPENSBURG, PA 17257 PH 717-532-7321 FAX 717-532-7704 WWW.SHIPCOPUMPS.COM BULLETIN 103 Revised 8/17 TYPE PC Propeller Condensate Pumps with Cast Iron Receivers
More informationtype 630r relief Valve
December 2011 type 630r relief Valve W1934 Figure 1. Type 630R Relief Valve Introduction The Type 630R is a general relief valve that is available in NPS 1 and 2 / DN 25 and 50 body sizes. It is frequently
More information4P-300 4V-500 CONTINUOUS PRESSURE THERMOPLASTIC DUAL. PRINCIPLE (U & Z Flow) DUAL CHECK VALVE. PRINCIPLE (Stn.Steel) REDUCED PRESSURE
BFCA9000 5/01 TABLE OF CONTENTS Selection Guide................................................. 2 Double Check Valve (Series 40-100)................................. 3-8 Double Check Valve (Model DC)...................................
More informationCombustion Gas Turbine Fuel Pumps. CIRCOR White Paper
Combustion Gas Turbine Fuel Pumps CIRCOR White Paper The modern combustion gas turbine is one of the most reliable machines in use and a workhorse of the electric power generation industry. It can be on-site
More informationM SERIES Multi-Jet Cold Water Meter
M SERIES Multi-Jet Cold Water Meter /4 1 1-1/2" 2" Maximum Flow GPM 0 0 1 Minimum Flow GPM.2.7 1. 2.0 Maximum Operating Pressure 0 psi Maximum Operating Temperature F ( C) Also Available in Hot Water Applications
More informationThermostatic Control Valve
Thermostatic Control Valve Model R Typical applications Refrigeration compressors Industrial compressors Turbines Engines Gear boxes High pressure applications Model R Key benefits No leak design --No
More informationLiquid Turbine Flow Meters
NuFlo Liquid Turbine Flow Meters NuFlo developed its first flow meter for oilfield applications in 1957. The meter incorporated a tungstencarbide shaft and bearing to withstand the rugged conditions of
More informationLaboratory Evaluation Report for: Backflow Preventer for Beverage Dispensing Equipment
American Society of Sanitary Engineering Seal (Certification) Program Laboratory Evaluation Report for: Backflow Preventer for Beverage Dispensing Equipment Tested under ASSE Standard 1022 ASSE: 2003 ANSI:
More informationThermostatic Control Valve
Thermostatic Control Valve Model J Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationVic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730
Series 730 Vic-Strainer is lighter than flanged Y type strainers and provides straightthrough flow for lower pressure drop. It installs with two Victaulic couplings, and is rated up to 750 psi/5175 kpa
More informationHD Series. Pilot-Operated Regulating Valves. HD Series features & benefits
Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2004 Watson McDaniel Company features & benefits Ductile Iron body for higher pressures Full port strainer
More informationTriple offset technology for lower pressures.
Triple offset technology for lower pressures. Vanessa Series 30-RS Triple Offset Valves A triple offset valve designed for the specific needs of general applications in lower pressure classes. Emerson.com/FinalControl
More informationevoq4 Electromagnetic Water Meter Make every drop count
evoq4 Electromagnetic Water Meter Make every drop count www.elsteramcowater.com www.elster-evolution.com Elster AMCO Water 3 Elster AMCO Water evoq4 Electromagnetic water meter Today s water meters need
More informationFLOW METERS FOR MINING
N E T A F I M U S A FLOW METERS FOR MINING IRT FLOW METERS MINING DIVISION Ideal for Moderate to Dirty Water Conditions Description Netafim USA s IRT Flow Meter, with its specially designed paddle wheel
More informationVane Pumps for Corrosive, Thin Liquids at Higher Pressures
Viking LVP Series Stainless Steel Vane Pumps Vane Pumps for Corrosive, Thin Liquids at Higher Pressures Capacity to 36 M³/Hr (160 GPM) Pressure to 14 Bar (200 PSI) Viscosity 0.1 to 500 cst (28 to 2,300
More informationType HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications
March 2013 Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications High Capacity Compact Design High Capacity Internal Relief TYPE HSR ANGLE BODY Globe Bodies Angle
More information