SHACON WORM GEAR BOXES
|
|
- Poppy Holland
- 6 years ago
- Views:
Transcription
1 SHACON WORM GEAR BOXES
2 About Our Products SHACON WORM REDUCTION GEAR BOXES are convenient, efficient and economical means of power transmission. SHACON Gear Boxes incorporate advanced designs and are manufactured by specialized techniques. Standardised sizes developed facilitate interchangeability of gear boxes and spares. Design : SHACON Gear Boxes incorporate worm gearing that conforms to National / International standards. Derived from our experience and based on the development efforts of our engineers, valuable modifications have been incorporated to obtain rugged, silent, efficient and long lasting gearing. Generously sized bearings and shafts sustain external loads and increased life of gear boxes. Box type gear case with ribs used in SHACON Gear Boxes have proved to be capable of handling heavy duty loads and highly efficient to radiate heat thus increasing power transmitting capacity of the gear box. Worm Shaft : selected steel is used for worm shafts for increased strength and life. Precision machined involute thread form used make gearing more efficient and silent running. nalised metric sizes of shaft extensions are available as standard. Worm Wheel : Smaller worm wheels are of single piece construction and made out of chilled cast high grade Phosphor Bronze. Larger size worm wheels are made out of centrifugally cast high grade Phosphor Bronze rims shrink fitted on CI center and positively secured by special pegs. Finely distributed and refined grains of Bronze matrix give high impact strength, reduce friction and subsequent heating and increase life of gearing. Worm wheel teeth profiles are generated by specially developed Hobbing and Reaming cutters to obtain true conjugate action between worm thread and worm wheel teeth thus ensuring high load carrying capacity, silent running and efficient power transmission. Each and every worm wheel is inspected on a specially developed gear checker to ensure adherence of quality standards and interchangeability between any worm and wheel of that size and ratio. Specialised assembly methods used to obtain optimum tooth bearing contacts and proper bearing per-loads for actual conditions of the gear boxes when in service. Output Shaft : In a standard SHACON Gear Boxes this is made out of quality plain carbon steel and precision machined. nalised metric sizes of shaft extensions are available as standard. Gear Case : This is made out of fine quality cast iron and accurately machined with the help of jigs and fixtures to ensure accuracies of important parameters, ease of maintenance and interchangeability of spares. Bearings : Generously sized dual purpose bearings are used to sustain gearing and external shaft loads for longer life. Lubrication : SHACON Gear Boxes have built-in splash lubrication system that splashes and cools the oil effectively. On larger size gear boxes this is further assisted by an external cooling fan. Quality Assurance : It has been our endeavour at SHACON to manufacture the products worthy of money the buyer spends and hence all the products we manufacture undergo quality and inspection checks governed by our quality assurance scheme. This scheme provides for the purchase of materials to testing of every assembled gear box. Special custom built gear boxes : We also undertake design, development and manufacture of special worm gear boxes such as aeration cone gears, lift gears, cooling tower gears, agitator gears, tube mill gears etc.
3 POWER RATINGS SHACON 1¾ Ctr. 2¼ Ctr. 3 Ctr. Nominal Capacity :1 4.75: : : :1 7.33: : : : : : : ½:1 1: : : : :1 21.0: : : : : : :1 30.0: : : : : : :1 70.0: : : Power ratings are based on 12 hrs/day running with uniform loading. Output torque values are in inch-lb. 1 Kw = 1.34 HP 1 Kg-m = 86.8 inch-lb
4 POWER RATINGS SHACON 4" Ctr. 5 Ctr. 6 Ctr. Nominal Capacity :1 5.17: : : :1 7.50: : : :1 9.67: : : ½:1 1: : : : : :1 20.0: : : : :1 31.0/ : : : : : :1 49.0/ : : : :1 69.0: : : Power ratings are based on 12 hrs/day running with uniform loading. Output torque values are in inch-lb. 1 Kw = 1.34 HP 1 Kg-m = 86.8 inch-lb
5
6 Horizontal Dimensions W1 Assembly Arrangement V1 F Input Shaft Y Output Shaft Vertical A: Plan B: Elevation C: Assembly No. F: Input Shaft G: Output Shaft All dimensions are in mm, unless otherwise stated Tolerence grades Dimension Tolerence F & G h6 W1 & W2 h9 V1 & V2 0.0 / -0.2 Design and dimensions are subject to change Manufactured by : Shacon Engineering Company 14,Veena Dalvai Industrial Estate,S.V.Road, Oshiwara,Jogeshwari (W),Bombay Tel : / Fax : E mail : shacon@vsnl.com
INVOLUTE TOOLING CORPORATION
MANUFACTURERS OF DRIVES AND TRANSMISSIONS OFFICE: 13, JORBAGH, NEW DELHI - 110 003, INDIA, TEL: +91(011)24621453 FAX: +91(011) 24603609 WORKS: PLOT-65, SEC-27C, FARIDABAD - 121 003. INDIA, TEL: +91(0129)
More informationDEPARTMENT OF MECHANICAL ENGINEERING Subject code: ME6601 Subject Name: DESIGN OF TRANSMISSION SYSTEMS UNIT-I DESIGN OF TRANSMISSION SYSTEMS FOR FLEXIBLE ELEMENTS 1. What is the effect of centre distance
More informationRing Granulator. Unique crushing action results in higher output and lower power consumption.
Technical Features Specially designed for high capacity crushing of coal and lignite (range from 40 to 1700 TPH). Unique crushing action results in higher output and lower power consumption. Maximum feed
More informationKINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK Sub Code/Name: ME 1352 DESIGN OF TRANSMISSION SYSTEMS Year/Sem: III / VI UNIT-I (Design of transmission systems for flexible
More informationSHAFT MOUNTED HELICAL GEAR REDUCER
Shaft Mounted Helical Gear Assembly INTRODUCTION The VIGNESSH Shaft Mounted Helical Gear Units are the result of experience in design and production, taking advantage of the most recent relevent research
More informationSHREE SHAKTI GEARED MOTORS are warranteed for Twelve Months against any manufacturing defects.
SHREE SHAKTI Geared Motors are designed to provide, a most efficient, economical and compact drive for low speed Applications. It is a most compact combination of an electric motor (A.C. or D.C.) and a
More informationPart VII: Gear Systems: Analysis
Part VII: Gear Systems: Analysis This section will review standard gear systems and will provide the basic tools to perform analysis on these systems. The areas covered in this section are: 1) Gears 101:
More informationUNIT -I. Ans: They are specified by the no. of strands & the no. of wires in each strand.
VETRI VINAYAHA COLLEGE OF ENGINEERING AND TECHNOLOGY, THOTTIAM, NAMAKKAL-621215. DEPARTMENT OF MECHANICAL ENGINEERING SIXTH SEMESTER / III YEAR ME6601 DESIGN OF TRANSMISSION SYSTEM (Regulation-2013) UNIT
More informationSelection of Gear Box
orm Speed educers Selection of ear ox or ood performance of ear ox, The right selection is very important. The ear Unit Selection is made by comparing actual transmitted loads with catalogue ratings are
More informationME6601 DESIGN OF TRANSMISSION SYSTEMS
SYED AMMAL ENGINEERING COLLEGE (Approved by the AICTE, New Delhi, Govt. of Tamilnadu and Affiliated to Anna University, Chennai) Established in 1998 - An ISO 9001:2008 Certified Institution Dr. E.M.Abdullah
More informationInstallation Tensioning Procedure
Contents PARTICULARS Introduction PIX X treme HTD Belts Construction Features Designation Pitch range Length range Pulley Dimensions Length tolerances Width tolerances PIX X treme Classical Belts Construction
More information11. GEAR TRANSMISSIONS
11. GEAR TRANSMISSIONS 11.1. GENERAL CONSIDERATIONS Gears are one of the most important elements used in machinery. There are few mechanical devices that do not have the need to transmit power and motion
More informationGear Engineering Data. Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables
Engineering Gear Engineering Data Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables G-79 Gear Selection Stock Spur Gear Drive Selection When designing a stock gear drive using the horsepower
More informationGEAR GENERATION GEAR FORMING. Vipin K. Sharma
GEAR GENERATION GEAR FORMING 1 GEAR MANUFACTURING Manufacturing of gears needs several processing operations in sequential stages depending upon the material and type of the gears and quality desired.
More informationPRODUCT INFORMATION FENNER V-BELTS AND WEDGE BELTS
PRODUCT INFORMATION FENNER V-BELTS AND WEDGE BELTS Not all belts are the same. Fenner belts are made to exacting specifications and have set the standard in technical development in the toughest applications
More informationGearboxes. Gearboxes
254 Brammer provide a comprehensive nationwide industrial repair service. Strategically located Gearbox Centres around the UK Complete service from emergency repair or gearbox replacement to scheduled
More informationTooth thickness Dedendum. Addendum. Centre distance Nominal
FORMULAS SPUR GEARS TO FIND:- PCD ØD MODULE No. of TEETH CP ADDENDUM DEDENDUM MODULE No. of TEETH x MOD (mm) (No. of TEETH + ) x MOD (mm) 5.4 MODULE CP π (mm) PCD MODULE (mm) MODULE x π (mm) MODULE (mm)
More informationINDUCTION MOTOR. There is no physical electrical connection to the secondary winding, its current is induced
INDUCTION MOTOR INTRODUCTION An induction motor is an alternating current motor in which the primary winding on one member (usually the stator) is connected to the power source and a secondary winding
More informationCHENDU COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK
CHENDU COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK Sub Code: ME 2342 DESIGN OF TRANSMISSION SYSTEM UNIT - I 1. How the bevel gears are classified? Explain with
More informationDescription. Power range: 4 ~5000 KW; Features. Optional accessories. Main application. Offshore Hoisting, lifting and transportation
Perfect Accord Engineering Sdn. Bhd. Boneng H series Helical Gear Units Power range: 4 ~5000 KW; Transmission ratio range: 1.25-450(imax 138000); Torque range: 2.3-900KN.m; Highly modular design, highly
More informationCHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
More informationRADIAL GATES USES CONSTRUCTION FEATURES FACE PLATE SEALS
RADIAL GATES USES Maintenance of water elevations in canals or spillways Increased storage capacity for reservoirs Diversion of water for irrigation Flow control preserving wide, clear waterways Other
More informationSUDARSHAN GEARS ISO CERTIFIED COMPANY MADE IN INDIA ALUMINIUM WORM GEAR BOXES
ALUMINIUM WORM GEAR BOXES Plot N. 7, Mira Co-op industrial Estate, National Highway No. 8, KashiMira Naka, Mira Road (E), Dist. Thane - 4004. India Tel.: 022 28455990/9/85 Fax No.: 022-28455982 Email:
More informationMAAG TM LGD lateral gear drive for horizontal mills
MAAG TM LGD lateral gear drive for horizontal mills 2 Our Quality Policy FLSmidth MAAG Gear is committed to creating long lasting relationships that establish us as a trustworthy, reliable and professional
More informationFEATURES / BENEFITS... 2 SPECIFICATION / HOW TO ORDER... 4 NOMENCLATURE... 11
CONTENTS QUANTIS RHB FEATURES / BENEFITS.................................... 2 SPECIFICATION / HOW TO ORDER........................... 4 NOMENCLATURE......................................... 11 GEARMOTORS
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationKeyseat 180 from split. Available Sure-Grip Bushings (Millimeter Bores-Inch Bolt) F J M N P SKL SFL EL QT JA SH SDS SD SK SF E
B u s h i n g s Sure-Grip * Quick Detachable bushings are easy to install and remove. They are split through flange and taper to provide a true clamp on the shaft that is the equivalent of a shrink fit.
More informationTotal Gear and Mechanical Power Transmission Solutions
GEARTECH ENGINEERS PVT. LTD An ISO 9001 : 2008 Company Total Gear and Mechanical Power Transmission Solutions The Most reliable Gear Reducers Planetary, Helical, Bevel Helical & Innovative Combination
More informationCONTENTS ComboGear Updated 5/17/2016
MASTER CONTENTS Updated 5/17/2016 Contents Features / Benefits...CG-2 Specification...CG-4 How To Order...CG-4 Nomenclature...CG-4 Easy Selection...CG-5 Selection Using Rating Tables...CG-12 Dimensions...CG-23
More informationPA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
More informationKISSsoft 03/2017 Tutorial 15
KISSsoft 03/2017 Tutorial 15 Bevel gears KISSsoft AG Rosengartenstrasse 4 8608 Bubikon Switzerland Tel: +41 55 254 20 50 Fax: +41 55 254 20 51 info@kisssoft.ag www.kisssoft.ag Contents 1 Starting KISSsoft...
More informationMAE 322 Machine Design Shafts -3. Dr. Hodge Jenkins Mercer University
MAE 322 Machine Design Shafts -3 Dr. Hodge Jenkins Mercer University Setscrews Setscrews resist axial and rotational motion They apply a compressive force to create friction The tip of the set screw may
More information4 Fenner Torque Drive Plus 3
Fenner Torque Drive Plus 3 offers; State of the art power ratings. Compact drive package - reduced weight. Quiet operation. Accuracy of positioning. Anti-static as standard. Runs on standard HTD pulleys.
More informationKOMPRESSOREN Air + Nitrogen
Air + Nitrogen. Fotos: Ralf Deichelmann HIGH PRESSURE INTEGRATED SYSTEM TECHNOLOGY CUSTOM-BUILT FOR SPECIFIC INDUSTRIAL APPLICATIONS Modern industrial processes require absolute operating safety, flexible
More informationUGE 180 N, 2 UGE 180 N UNDERFLOOR WHEEL LATHE
UGE 180 N, 2 UGE 180 N UNDERFLOOR WHEEL LATHE BASIC SPECIFICATIONS Range of wheel tread diameters: Maximum axle load: Available multi track gauge version 350 to 1,270 mm 18 10 kn PURPOSE The UGE 180 N
More information900 Series Split Case Fire Pump Systems
BULLETIN 900/REV. E 900 Series Split Case Fire Pump Systems MODEL 481 MODEL 483 FM Approved U L Listed motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48
More informationChapter 1 Gear Design
Chapter 1 Gear Design GTU Paper Analysis Sr. No. Questions Nov 16 May 17 Nov 17 May 18 Theory 1. Explain the following terms used in helical gears: (a) Helix angle; (b) Normal pitch; (c) Axial pitch; (d)
More informationFig. 1 Two stage helical gearbox
Lecture 17 DESIGN OF GEARBOX Contents 1. Commercial gearboxes 2. Gearbox design. COMMERICAL GEARBOX DESIGN Fig. 1 Two stage helical gearbox Fig. 2. A single stage bevel gearbox Fig. 4 Worm gearbox HELICAL
More informationKISSsoft 03/2013 Tutorial 15
KISSsoft 03/2013 Tutorial 15 Bevel gears KISSsoft AG Rosengartenstrasse 4 8608 Bubikon Switzerland Tel: +41 55 254 20 50 Fax: +41 55 254 20 51 info@kisssoft.ag www.kisssoft.ag Contents 1 Starting KISSsoft...
More informationSARAVEL CENTRIFUGAL FANS For Airconditioning & Industrial Application
CAT.NO. 120-97 SARAVEL CENTRIFUGAL FANS For Airconditioning & Industrial Application TABLE OF CONTENTS Introduction......3 Selection Examples......4-5 Correction Factors......6 Rating Tables.........7-17
More informationGearbox standard series Your industrial Gearboxes. Standard Industrial NH/NHK
www.gamesagearbox.com Standard Industrial 1 Contents Gear Design and Construction 3 Service Factors 5 Example of Selection 7 Spur Gearboxes NH I 8 NH II, NHS II, NHZ I2 NH III, NHS III, NHZ II7 NH IV,
More informationCylindrical and Needle Roller Bearings for Vibratory Machinery. Reliable solutions for extreme requirements
Cylindrical and Needle Roller Bearings for Vibratory Machinery Reliable solutions for extreme requirements Cylindrical and needle roller bearings for vibratory machinery Reliable solutions for extreme
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationACETARC ACETARC FOUNDRY LADLES ENGINEERING. General design specification
ACETARC ENGINEERING ACETARC FOUNDRY LADLES General design specification Acetarc foundry ladles are available as two standard design options: Westminster medium duty foundry ladle For non-ferrous foundries
More informationMANUFACTURING OF GEAR BOXES
Profile No.: 29 NIC Code: 29301 MANUFACTURING OF GEAR BOXES 1. INTRODUCTION: Gears play a prominent role in mechanical power transmission. A gear or cogwheel is a rotating machine part having cut teeth,
More informationBEARINGS The lower bearing assemble is constructed to allow continuous operation when fully submerged in wastewater.
GENERAL SPECIFICATION INTENT The equipment to be supplied by manufacturer includes the screw pumps, support for the drive unit, profile plates, motors, gearboxes, couplings, guards, upper and lower bearing
More informationFisher 1077 Manual Handwheel Rotary Actuator
1077 Handwheel Actuator Product Bulletin Fisher 1077 Manual Handwheel Rotary Actuator Fisher 1077 manual only handwheel actuator is for use with rotary shaft valves such as the 9500 butterfly valve; 8532,
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com STRAIGHT 90 DUAL OUTPUT
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationCH#13 Gears-General. Drive and Driven Gears 3/13/2018
CH#13 Gears-General A toothed wheel that engages another toothed mechanism in order to change the speed or direction of transmitted motion The gear set transmits rotary motion and force. Gears are used
More informationL Jaw Type Couplings. Coupling Selection Example
Coupling Selection Example A coupling is required to drive a pulp grinder from a 0 RPM, 20HP, 26TC motor approximately 6 hours per day. Motor shaft is 8 diameter with a 8 key and grinder shaft is 8 diameter
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationMAAG Gear Units for the Mining Industry KA and KB Transmission Gears
MG Gear Units for the Mining Industry K and KB Transmission Gears Heavy Quality. Mining Industry Gear Units Ka & KB Transmission Gears Introduction Technical description Gear wheels Bearings Gear casing
More informationSplitter Boxes from Liebherr. Strong and quiet-running
Splitter Boxes from Liebherr Strong and quiet-running Long operating life Liebherr multi-output pump transmissions are designed and built for tough operating conditions in construction machinery, and are
More informationPINS & BUSHINGS METRIC
PINS & BUSHINGS METRIC PINS & BUSHINGS METRIC CONTENTS PAGE NUMBER General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable Guide Posts 4 Automotive Straight Guide Posts
More informationCOUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
More informationSHAFT MOUNT REDUCERS. For Additional Models of Shaft Mount Reducers See Sections F & J G-1
SHAFT MOUNT REDUCERS PowerTorque Features and Description... -2 Nomenclature... -4 Selection Instructions... -5 Selection By Horsepower... -7 Mechanical Ratings... -12 Dimensions... -14 Accessories...
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationRoller chains TPM - QRC pag. 40 Roller chains RCX pag. 43 Conveyor chains CRT pag. 45 Chain guide rails in polyethylene pag. 48
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationM.H INDUSTRIAL EQUIPMENTS
M.H INDUSTRIAL EQUIPMENTS Tyre Flexible Cushion Coupling Highly flexible & resilient Absorbs Large Misalignment Low Torsional Stiffness Dampens shock & Vibration Flexible element easily replaceable insitu
More informationWemco Screw Classifiers
Wemco Screw Classifiers 2 Wemco Classifiers Leaders in Classification FLSmidth has provided quality equipment to the mining industry since the early 1900s. Through years of intensive research and development
More informationGRADERS 845B VHP I 865B VHP I 885B VHP
GRADERS 845B VHP I 865B VHP I 885B VHP GRADERS 845B VHP I 865B VHP I 885B VHP Technological innovation for high performance and excellent results Case has a commitment to its customers to produce results.
More information1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
More informationChoose quality. FIMA 1
S C R E W C O M P R E S S O R S M A D E I N I T A L Y Choose quality. FIMA 1 AIR COMPRESSORS AND ACCESSORIES FIMA has been operating on the international market for over 15 years. Its staff has over 40
More informationAlways the right gear unit. The widest gear unit range worldwide. ... to large ones. From small. FLENDER gear units. Answers for industry.
Always the right gear unit The widest gear unit range worldwide... to large ones. From small FLENDER gear units Answers for industry. From universal Solutions for many applications Modern drive solutions
More informationPRODUCT MANUAL B-FLEX COUPLING
RATHI TRANSPOWER PVT. LTD. PUNE - INDIA PRODUCT MANUAL B-FLEX COUPLING R-PM-B-01/02-01/14 Page 1 INDEX CONTENTS PAGE Features of B-FLEX Coupling 3 At a glance 3 Components of B-FLEX Coupling 3 How B-FLEX
More informationGEARED TO EXCEL SMSR GEAR BOX PLUMMER BLOCK HELICAL GEAR PUMP V BELT PULLEY
www.nisukaindustries.com GEARED TO EXCEL SMSR GEAR BOX PLUMMER BLOCK HELICAL GEAR PUMP V BELT PULLEY COMPANY PROFILE The Industries Private Limited was established in 994 for manufacturing High Quality
More informationTHE ORIGINAL SPLIT ROLLER BEARING. Visit CooperBearings.com
OVERVIE W THE ORIGINAL SPLIT ROLLER BEARING Visit CooperBearings.com THE COMPANY Since inventing the split roller bearing in 1907, Cooper has become synonymous with the manufacture of quality, long-lasting
More informationSITEX ST Couplings SITEX ST
STX ST Couplings STX ST STX ST couplings Description STX ST couplings are fully manufactured in high quality steel. They are made of 1 or 2 geared hubs which are coupled with one sleeve through which the
More informationSECTION 8 BEVEL GEARING
SECTION 8 BEVEL GEARING For intersecting shafts, bevel gears offer a good means of transmitting motion and power. Most transmissions occur at right angles, Figure 8-1, but the shaft angle can be any value.
More informationSUBMERSIBLE SEWAGE PUMPS TYPE : NS
SUBMERSIBLE SEWAGE PUMPS TYPE : NS SUBMERSIBLE SEWAGE PUMPS TYPE - NS Range : Delivery size upto300 mm Capacity up to 1800 m³/hr (Max.) Head up to 90 m (Max.) Max. permissible solid size up to 300 mm Applications
More informationProduct Brochure. MagnaGear XTR reducers
Product Brochure MagnaGear XTR reducers We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers, processes over the total lifecycle
More informationchain sprocket SIMPLEX DUPLEX TRIPLEX
chain sprocket SIMPLEX DUPLEX TRIPLEX CHAIN SPROCKET DRIVE The Transmission of mechanical power without slippage and with a high degree of maintained efficiency is a basic function of the Roller Chain
More informationMAAG TM WPU two-stage gear unit for vertical mills
MAAG TM WPU two-stage gear unit for vertical mills 2 Our Quality Policy FLSmidth MAAG Gear is committed to creating long lasting relationships that establish us as a trustworthy, reliable and professional
More informationViking In-Line Helical Gear Reducers
Page 615.1 Gear Ratio Range: (varies by reducer size) Output Speeds (with 1750 rpm input) Reducer Horsepower Range: From 2.63:1 to 38.0:1 (Varies by reducer size) 46 665 rpm.5 HP (.37 kw) to 350 HP (261
More informationMechanism Feasibility Design Task
Mechanism Feasibility Design Task Dr. James Gopsill 1 Contents 1. Last Week 2. Types of Gear 3. Gear Definitions 4. Gear Forces 5. Multi-Stage Gearbox Example 6. Gearbox Design Report Section 7. This Weeks
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationL1 (Standard Motor Length) L2 (Brake Motor Length)
HepcoMotion Geared Motor Option The optional geared motor will be the preferred choice for many applications as it provides an excellent combination of power, accuracy, flexibility and value. HepcoMotion
More informationANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A.
ANGLgear right angle drives Inch and Metric Series The Original Right Angle Gear Drive Made in the U.S.A. INDEX Intro to ANGLgear Inch & Metric Series pg. 2-3 2 Flange Units, Inch Series pg. 4 3 Flange
More informationTRANSMISSION BELTS. Friction Belts. Reliable Trusted Connected
TRANSMISSION BELTS Friction Belts Reliable Trusted Connected Reliable Trusted Connected Fenner Friction Belts World renowned for their rugged construction and efficient performance, Fenner friction belts
More informationA04. WORM GEAR REDUCERS AND GEARMOTORS P 1 0, hp, M N lb in, i N , n 2 0, rpm
WORM GEAR REDUCERS AND GEARMOTORS P 1 0,09... 55 hp, M N2 1 900 lb in, i N 10... 16 000, n 2 0,056... 400 rpm A04 Index 1 - Symbols 2 2 - Specifications 5 3 - Designation 9 4 - Thermal power P t [hp] 10
More informationViking Helical Gear Reducers
Page 610.1 Issue J Gear Ratio Range: (varies by reducer size) 1.87:1 to 7.95:1 Output Speeds (with 1750 rpm input) Reducer Horsepower Range: 950 to 220 rpm 1.4 HP (.1 kw) to 49.8 HP (37.2 kw) THREE SIZES
More informationT-smart Butterfly Valves. Made by GEA Tuchenhagen. GEA Mechanical Equipment / GEA Tuchenhagen
Liquids to Value T-smart Butterfly Valves Made by GEA Mechanical Equipment / T-smart Butterfly Valves For many years, butterfly valves have proven their worth in process plants with different types of
More informationCommissioning & Maintenance Instructions. for. COBRA linear stepping motors
Commissioning & Maintenance Instructions for COBRA linear stepping motors ACP&D Limited. 86 Rose Hill Road, Ashton-under-Lyne, Lancashire, OL6 8NS. Tel : +44 (0)161 343 1884 Fax: +44 (0)161 343 7773 e-mail:
More informationPLANETARY DRIVE. A Better Planetary Reduction Gear Drive. (ISO Company)
PLANETARY DRIVE A Better Planetary Reduction Gear Drive. BEACON GEAR TRANSMISSIONS (P) LTD. (ISO 9001-2015 Company) GENERAL Beacon Gear Transmissions (P) Ltd is one of the leading manufacturer of Planetary
More informationDUDLEY'S" HANDBOOK OF PRACTICAL GEAR DESIGN AND MANUFACTURE. Stephen P. Radzevich
Second Edition DUDLEY'S" HANDBOOK OF PRACTICAL GEAR DESIGN AND MANUFACTURE Stephen P. Radzevich LßP) CRC Press VV J Taylors Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor
More informationRSS 120-M SHREDDER, IRON SEPARATOR AND SCREENER
Asphalt Recycling RSS 120-M SHREDDER, IRON SEPARATOR AND SCREENER A 3-IN-1 MACHINE The Ammann RSS 120-M takes on shredding, separating and screening as if it were custom-built for each task. The machine
More informationWorld Series Monorail Hoists
World Series Monorail Hoists Capacities from 1 to 15 ton Shaw-Box World Series monorail wire rope hoists are built for the world market and combine over 130 years of experience with the latest in manufacturing
More informationPRODUCTS AND SERVICES 2017
PRODUCTS AND SERVICES 2017 www.wagears.com.au INTRODUCTION WA Gears Pty Ltd is a precision gear manufacturing company based in Henderson, Western Australia. We specialise in manufacturing gears and precision
More informationPINS & BUSHINGS METRIC
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS METRIC www.danly.com PINS & BUSHINGS METRIC CONTENTS General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable
More informationGEAR NOISE REDUCTION BY NEW APPROACHES IN GEAR FINISHING PROCESSES
GEAR NOISE REDUCTION BY NEW APPROACHES IN GEAR FINISHING PROCESSES Nikam Akshay 1, Patil Shubham 2, Pathak Mayur 3, Pattewar Vitthal 4, Rawanpalle Mangesh 5 1,2,3,4,5 Department of Mechanical Engineering,
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 Includes Tools 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Lathe Tooling
More informationRibbed Belts FRICTION BELT DRIVES FRICTION BELT DRIVES. Drive Design & Maintenance Manual
BELT DIMENSIONS & PHYSICAL PROPERTIES Belt Section PJ PK PL PM Rib pitch E (mm) 2.4.56 4.70 9.40 Belt thickness H (mm).50 5.00 7.00 12.00 Mass/unit length/rib (g/m/rib) 8.20 19.50 2.00 110.00 Maximum belt*
More information1100 Series Multi-Stage Vertical Turbine Pumps
1100 Series Multi-Stage Vertical Turbine Pumps Capacities to 40,000 GPM Heads to 1,500 Feet Temperatures to 200 F Water Lubricated Open Lineshaft Vertical Hollow Shaft Motor The vertical hollow shaft motor
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationbutterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
More informationSeries 54 and S54 Resilient Couplings
Series 54 and S54 Resilient s Bibby Transmissions Resilient s Bibby are the world originator of the resilient grid type shaft coupling, which is universally accepted by engineers to be one of the most
More informationWorm gears Worm wheel sets
Worm gears Worm wheel sets Unique level of effectiveness, torque and lifespan www.cavex-drivetechnology.com 7 Winning Arguments: Technology - Made in Germany 1 Our superior CAVEX gearing Our worm gearboxes
More informationDomestic Pumps. Pumps. Self Priming Monoblock Pumps Open Well & Submersible Pumps
Domestic Pumps Pumps Self Priming Monoblock Pumps Open Well & Submersible Pumps Self Priming Monoblock Pump Features: Operating Conditions Operating water temperature: upto 65 C Max working pressure: 5.5
More information