HOLLAND FIFTH WHEEL REBUILD KITS AND MOUNTING BRACKETS PARTS IDENTIFICATION GUIDE FOR HOLLAND FIFTH WHEEL REBUILD KITS AND MOUNTING BRACKETS

Transcription

1 HOLLAND FIFTH WHEEL REBUILD KITS AND MOUNTING S PARTS IDENTIFICATION GUIDE FOR HOLLAND FIFTH WHEEL REBUILD KITS AND MOUNTING S

2 FIFTH WHEEL REBUILD & REPAIR KITS FWAL LOW LUBE Make the smart decision when it s time to rebuild or replace your HOLLAND fifth wheel top plate. Don t give up the best when it comes to durable and reliable performance choose HOLLAND. TOP PLATE REBUILD KIT JAW KIT HANDLE KIT LUBE PLATE & POCKET INSERTS XA-AL-A-L-P (LH) RK-AL-A-L RK-AL RK AL-P RK-AL-1 LUBE PLATE KIT: RK POCKET INSERTS: RK-PKT-3 FW35 TOP PLATE REBUILD KIT JAW KIT HANDLE KIT XA-351-A-L-P (LH) XA-351-A -P (RH) RK-351-A-L (LH) RK-351-A (RH) RK RK NOTE: If the HOLLAND fifth wheel number you are looking for is not mentioned in this flyer, please contact our customer service representatives for assistance at

3 FW333 LOW LUBE TOP PLATE REBUILD KIT JAW KIT HANDLE KIT LUBE PLATE & POCKET INSERTS XA-331-A-L-P (LH) XA-331-A-P (RH) RK-351-A-L (LH) RK-351-A (RH) RK RK RK LUBE PLATE KIT: RK POCKET INSERTS: RK-PKT-2 FW31 NO LUBE TOP PLATE REBUILD KIT JAW KIT HANDLE KIT LUBE PLATE & POCKET INSERTS XA-311-A-L-P (LH) XA-311-A-P (RH) RK-311-A-L (LH) RK-311-A (RH) RK-311-LK RK RK LUBE PLATE KIT: RK POCKET INSERTS: RK-PKT-2 FW8 TOP PLATE REBUILD KIT HANDLE KIT FOR FIFTH WHEELS MANUFACTURED PRIOR TO 1999, ADD WEDGE KIT RK XA-201-A-L-P (LH) XA-201-A-P (RH) RK-201-A3-L (LH) RK-201-A3 (RH) RK (LH) RK (RH) ORIGINAL SERVICE PARTS TO KEEP YOU ROLLING CALL TODAY

4 FWS1 TOP PLATE REBUILD KIT JAW KIT 31 XA-S1-A-L-P RK-FWS-A-L RK FW17 TOP PLATE REBUILD KIT JAW KIT HANDLE KIT XA-17-A-L-P RK-17-A-L RK RK FW16 LOW LUBE 6 E TOP PLATE REBUILD KIT JAW KIT HANDLE KIT XA-16-A-L-P (LH) XA-16-A-P (RH) RK-161-A (both LH and RH) RK RK (both LH and RH) NOTE: If the HOLLAND fifth wheel number you are looking for is not mentioned in this flyer, please contact our customer service representatives for assistance at LUBE PLATE KIT: RK POCKET INSERTS: RK-PKT-2

5 FW35 TERMINAL TRACTOR REBUILD KITS WITH STAINLESS STEEL AIR CYLINDER ASSEMBLY NUMBER TOP PLATE Includes Bracket Pins and Bushings REBUILD KIT with Stainless Steel Cylinder AIR CYLINDER Stainless Steel Not Bushed, Order Bushing Separately HEIGHT FW FW FW Drilled/Auto Lube FW Drilled/Auto Lube FW FW FW FW FW Drilled/Auto Lube FW FW XA P XA-2524-R XA-0357 REBUILD KITS WITH ALUMINUM AIR CYLINDER ASSEMBLY NUMBER TOP PLATE Includes Bracket Pins and Bushings REBUILD KIT with Aluminum Cylinder AIR CYLINDER Aluminum Not Bushed, Order Bushing Separately HEIGHT FW FW FW Drilled/Auto Lube FW Drilled/Auto Lube FW FW FW FW FW Drilled/Auto Lube FW FW XA P XA XA-0357 AIR CYLINDERS: NOTE AIR INLET AND PORT LOCATIONS FOR PROPER CYLINDER SELECTION AIR INLET AIR INLET PORT PORT BLIND END ROD END STAINLESS STEEL XA-2524-R-13-2 ALUMINUM XA FOR ALL TERMINAL TRACTOR MODELS JAW KIT: RK : RK BUSHINGS: XB-0011

6 MOUNTING S TRADITIONAL SLIDER - INTEGRATED FOR ANGLE MOUNT FIFTH WHEEL ASSEMBLY PART NUMBER GUIDE FW 35 X X XX X X XX* ILS SLIDER - FOOT MOUNT WITH ANGLE MOUNT XL-FW20094AL-en-US Rev B Amendments and errors reserved SAF-HOLLAND, Inc. SAF-HOLLAND, SAF-HOLLAND Original Parts, SAF, HOLLAND and, NEWAY are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc. General Holland prefix indicating complete fifth wheel assembly Fifth Wheel Series 35 = FW35 Series 33 = FW33 Series Low Lube 31 = FW31 Series NoLube 17 = FW17 Series 16 = FW16 Series LowLube AL = FWAL Series Low Lube Mounting Style Standard Duty Sliders A = Outboard (1 pc tie-bar) B = Inboard (serrated 3 pc tie-bar) Standard Duty Stationaries Z= Integrated Plate Mount Y = Foot Mount X = Bracket Castings Only (no angle or base plate) V = Brackets with 5 Vertical Leg Angle W = Brackets with 4" Vertical Leg Angle Travel 00 = Stationary 12 = = = = = = 6 No-Tilt 18 = 18 No-Tilt 30 = 30 No-Tilt 42 = 42 No-Tilt 11 = 10.7 Komp 17 = 16.8 Komp 25 = 24.5 Komp 41 = 41.3 Komp 54 = 53.6 Komp 66 = 65.8 Komp Angles Release Handle L = left-hand (road-side) R = right-hand (curb-side) No Angle Mounting Systems W = Aftermarket Inboard No-Tilt & FW33 Komp (serrated edge) X = Outboard Slider or Inboard Slider w/o angles or Stationary w/o Angles Y = Outboard No-Tilt & FW33 Komp Z = OEM Inboard No-Tilt & FW33 Komp (straight edge) Option Code** 00 = No Option 02 = Manual Secondary Lock 24 = Drilled & Tapped for Auto Lube 28 = Dolly Release Handle EL = Electronic Lock Indicator (ELI) Specialty Mounting Systems K = Kompensator (FW33 only) N = No-Tilt Height (approx.) 6 = 6" (stationary only) 7 = 7" 8 = 8" 9 = 9" 0 = 10 (FW33 Komp only) 1 = 11 (FW33 Komp only) 2 = 12 (FW33 Komp only) 3 = 13 (FW33 Komp only) Mounting Angle Frame Width A = 33.25" B = 33.38" C = 33.50" D = 33.62" E = 33.75" F = 33.88" G = 34.00" H = 34.12" J = 34.25" K = 34.38" L = 34.50" The following frame widths are available only on V Stationaries M = N = P = Q = R = S = T = U = V = W = *Please note that no "dashes" are used for the complete fifthwheel assembly new part number **Please note that not all options are available on every top plate. Multiple option combinations are available. safholland.us SAF-HOLLAND, Inc Fax