Dimensions Type DT/DV Motors and Brakemotors - Foot Mounted

Transcription

1 Dimensions Type DT/DV Motors and Brakemotors - Foot Mounted Motor Model A B BA C CB D E F G H J K LB OA P WA DV132S DV132M ) ) 89 DV132ML 2) DV160M DV160L ) ) 108 Output Shaft Model U UY V VO Key M DV132S DV132M DV132ML DV160M DV160L x.31 x 2.76 M12 x x 8 x 70 M12 x x.31 x 2.76 M12 x x 8 x 70 M12 x x.31 x 2.76 M12 x x 8 x 70 M12 x x.31 x 2.76 M16 x x 8 x 70 M16 x x.31 x 2.76 M16 x x 8 x 70 M16 x 36 Conduit Box AA AB X XA XC XJ 3 4 NPT NPT NPT NPT NPT ) Fan Guard flattened at base. 2) D dimension is not per IEC. Dimensions are inch mm Dimension LB is for brake option. Dimension CB is for brake release access. Eye bolts are removable. USCS Dimensions subject to change without notice

2 Parts List AC squirrel-cage motors DFV112M-DFV132S To be mounted to gear units D34+D35 D35 No. Description DIN standard label Part No. Qty No. Description DIN standard label Part No. Qty 1 Rotor cpl. DFV112M Nameplate 1 1 Rotor cpl. DFV112M Round head pin DIN1476 2x4-X5CrNi Rotor cpl. DFV132S Gasket f. p Rotor cpl. DFV132S Terminal box bottom Woodruff key DIN6888 8x11-ST Cheese head screw DIN84 AM5x16Sp Hexagon screw DFV112M DIN931 M8x A1C Terminal block KTM Hexagon screw DFV132S DIN931 M8x A1C Terminal clamp DIN46282 C10-Ms-vn Stator compl Hexagon head cap screw DIN933 M5x12Sz-CU3-E2E Nilos ring 6207-ZAV Lock washer DIN vn Hexagon head cap screw DIN933 M5x7Z1-8.8-A2C Cheese head screw DIN84 AM5x16Sp Lifting eyebolt DIN580 M Hexagon head cap screw DIN933 M5x16Sp-8.8-A2C Key DIN6885 A10x8x X Screw plug DIN46320 NPg21-FS Circlip/snap ring DIN471 32x1, Sealing ring DIN7603 A28x33-Gi X 1 35 Fan guard Gasket f. p Fan Terminal box cover V-ring V Screw plug DIN46320 NPg11-FS Equalizing ring 61x71x0,4 K Sealing ring DIN7603 A18x22-Gi B side brg. end shield Connect. terminal cpl. a) Deep groove ball bearing DIN J Label plate a) a)parts for TF version When ordering spare parts always quote nameplate data with serial number and designation with part number! 01/1996 Copyright reserved! All rights reserved acc. to DIN 34.

3 Parts List AC motor EN Page 1 / 2 DV/DVE 112M-132S EM Foot mounting No. Description Additional specifications SEW standard label Part No. Qty. 1 Rotor IEC 28x60 DV112M Rotor IEC 28x60 DV112M Rotor IEC 28x60 DV112M12/ Rotor IEC 28x60 DVE112M Rotor IEC 38x80 DV132S Rotor IEC 38x80 DV132S Rotor IEC 38x80 DV132S12/ Rotor IEC 38x80 DVE132S Key for IEC 28x60 DIN A8x7x50 +C Key for IEC 38x80 DIN A10x8x70 +C A bearing end shield Circlip DIN471 40x1, Deep groove ball bearing Z-J-K2P Circlip DIN472 80x2, Hex head screw DV112M ISO4014 M8x ADB Hex head screw DVE112M/DV132S ISO4014 M8x ADB Hex head screw DVE132S ISO4014 M8x A2F Stator * 1 22 Hex head screw DIN933 M5x7 Z1-8.8-A2F Lifting eye bolt DIN580 M Key DIN6885 A10x8x25-C45K X 1 32 Circlip DIN471 32x1, Fan Guard Fan V-seal W4278 V-35S-NBR Equalizing ring W x71x0, * order-dependently When ordering spare parts always quote nameplate data with serial number and designation with part number! Copyright reserved! All rights reserved according to DIN ISO SEW-EURODRIVE GmbH & Co KG Postfach 3023 D Bruchsal Tel. (07251) 75-0 Fax (07251)

4 Parts List AC motor EN Page 2 / 2 DV/DVE 112M-132S EM Foot mounting No. Description Additional specifications SEW standard label Part No. Qty. 42 B bearing end shield Deep groove ball bearing DIN Z-J-K2P Foot DV/DVE112M; parts included in stator complete 90 Foot DV/DVE132S; parts included in stator complete 91 Hex nut parts included in stator complete ISO4032 M Lock washer parts included in stator complete DIN128 A8-FST-PHR Machine screw parts included in stator complete ISO4762 M8x Oil seal without spring DIN3760 A40x55x7-NBR X Oil seal for 2-pole version DIN3760 A40x55x7-FKM Nameplate * Grooved Pin ISO8746 2x4-X5CRNI Gasket for lower part Terminal box lower part 1x M32x1,5 / 1x M16x1, Pan head screw parts included in stator complete W4046 M5x16-Tx-ST-A2F-GM Terminal Block parts included in stator complete W4723 KTM Terminal clip DIN46282 C10-MS-VN Hex head screw ISO4017 M5x12SZ-CU3-E2E Lock washer DIN FST-VN Pan head screw W4046 M5X16-TX-SZ-ST-A2F-GM Hex head screw ISO4017 M5x16SP-8.8-A2F Screw Plug with O-Ring W4411 M32x1,5-FS-NBR-OZ Gasket for cover Terminal Box Cover Screw Plug with O-Ring W4411 M16x1,5-FS-NBR-OZ Reference Plate for TF version W TF Terminal clip complete for TF version * order-dependently When ordering spare parts always quote nameplate data with serial number and designation with part number! Copyright reserved! All rights reserved according to DIN ISO SEW-EURODRIVE GmbH & Co KG Postfach 3023 D Bruchsal Tel. (07251) 75-0 Fax (07251)

5 Parallel Helical Reducer R/RF132/133A PARTS LIST US 1 R132/133A with in. Dia. Shaft 3 R132/133A with 90mm Dia. Shaft 2 RF132/133A with in. Dia. Shaft 4 RF132/133A with 90mm Dia. Shaft 2-gear stages When ordering parts, please supply nameplate data with serial number or S.O. number, model number, description of part and part number. All gears are stamped with a part number. Item Part Name Description Part No Qty 1 Pinion 1 2 Gear 1 3 Pinion Shaft 1 4 Gear 1 5 Pinion 1 6 Gear 1 7 Output Shaft in. Dia Output Shaft 34 90mm Dia Key 12 7/8x7/8x4-5/8 in Key 34 A25x14x140mm X 1 9 Oil Seal AS105x140x12mm Oil Seal A105x140x12mm Ball Bearing Retaining Ring 200x4mm Internal Hex Head Screw 13 M16x40mm Hex Head Screw 550mm Fl.24 M16x40mm Hex Head Screw 450mm Fl.24 M16x45mm Lockwasher 24 B16mm Output Cover Output Flange mm Dia X 1 16 Output Flange mm Dia Spacer Key B28x16x90mm Breather Plug M22x1.5mm X 1 22 Gearcase Gearcase Spacer X 1 24 Eyebolt M24mm Roller Bearing 22215E SEW-EURODRIVE, INC. X - As required Shaded items denote recommended spare parts. S - Sealant for all flanged sealing surfaces. 3-gear stages Item Part Name Description Part No Qty 26 Shim 75x90x0.1mm X 26 Shim 75x90x0.3mm X 28 Retaining Ring 75x4mm External Taper Roller Bearing Key-Hardened 2 Stage B14x9x40mm Key-Hardened 3 Stage B16x10x40mm Roller Bearing NUP2310E Nilos Ring 30310AV Taper Roller Bearing Shim 90x110x0.1mm X 38 Shim 90x110x0.3mm X X 39 Retaining Ring 110x4mm Internal Retaining Ring 110x4mm Internal Roller Bearing Key-Hardened B12x8x28mm Ball Bearing Retaining Ring 100x3mm Internal Thrust Washer S40x50x2.5mm Thrust Washer S45x55x3mm Retaining Ring 50x2mm External X 1 58 Drain Plug M22x1.5mm Drain Plug M22x1.5mm Retaining Ring 3 Stage 50x2mm External X 1 62 Shim 3 Stage 50x62x0.1mm X 62 Shim 3 Stage 50x62x0.3mm X 64 Shim 70x90x0.1mm X 64 Shim 70x90x0.3mm X 83 Nilos Ring 6319JV Retaining Ring 90x3mm Internal Anaerobic Sealant S Tube X 7/02

6 Technical Note AD..Input Shaft Assembly Dimension Comparisons CQ Mechanical FV FU Gear Unit R..27/37 F..37/47 K..37 S..37/47/57 R..47/57/67 F..57/67 K..47/57/67 S..67 R..77 F..77 K..77 S..77 R..87 F..87 K..87 S..87 R..97 F..97 K..97 S..97 R..107 F..107 K..107 CQ Dimension (inches) Input Size OLD AD1 AD2 AD3 AD3 AD4 AD5 AD6 AD7 AD8.625 x.75 x.875 x x FU x FV (in) x 2.36 x 3.15 x 4.33 x 4.33 x R R..147 F..127 K..127 R..167 F..157 K..157/ Indicates the new AD Input Size that has the same shaft dimensions (FU x FV) as the old Input Assembly. Date: Replaces: GM GM Page 1 of 1

7 Technical Note R Series Helical Units Dimension Comparisons Flange Mounted Q Old New V RF80/82/83 RF87 RF92/93 RF97 RF102/103 RF107 BD U DB OA RF132/133 RF137 SA RF142/143 RF152/162 RF147 RF167 AD AH Dimensions are millimeters, unless otherwise indicated. Size AD DB OA Q SA *AH BD in U mm V RF / RF RF82/ RF / RF92/ RF / RF102/ RF / RF132/ RF / RF142/ RF / RF RF Indicates dimensional change. * An optional shaft is available to match the AH dimension of the Figure I flange of the old series. Date: Replaces: R R Page 4 of 6