Chief Universal Measuring System

Transcription

1 Chief Universal Measuring System Includes Related Accessories 00 Chief Automotive Systems, Inc.

2 CHIEF S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Systems, Inc. warrants for one year from date of installation and/or purchase any of its products which do not perform satisfactorily due to defect caused by faulty material or workmanship. Chief s obligation under this warranty is limited to the repair or replacement of products which are defective and which have been misused, carelessly handled, or defaced by repair or repairs made or attempted by others. CHIEF AUTOMOTIVE SYSTEMS, INC. DOES NOT ASSUME RESPONSI- BILITY FOR ANY DEATH, INJURY OR PROPERTY DAMAGE RESULTING FROM THE OPERATOR S NEGLIGENCE OR MISUSE OF THIS PRODUCT OR ITS ATTACHMENTS. CHIEF MAKES NO WRITTEN, EXPRESS OR IMPLIED WARRANTY WHATSOEVER OF MERCHANTABILITY OR FIT- NESS FOR A PARTICULAR PURPOSE OR OTHERWISE REGARDING THE EQUIPMENT OR ANY PART OF THE PRODUCT OTHER THAN THE LIMIT- ED ONE-YEAR WARRANTY STATED ABOVE. Returned merchandise requires a RETURNED GOODS AUTHORIZATION NUMBER on the package. Authorization numbers can be obtained by calling or writing the Customer Service Department, Chief Automotive Systems, Inc. No returned merchandise will be accepted without an authorization number. All returned merchandise must be shipped freight prepaid (and may be subject to a percent handling and restocking charge) to: Chief Automotive Systems, Inc. Attn: Returned Goods Department 9 E. Fourth St. P.O. Box 8 Grand Island, Ne or Your Authorized Chief Automotive Systems, Inc. Representative

3 INTRODUCTION If it becomes necessary to order replacement parts for the Universal Measuring System or any of its opotional accessories, contact a Chief Automotive Systems, Inc. representative, ( in USA only). If calling after hours, leave a message on the answering machine and your local representative will be contacted at the start of the next business day. When contacting Chief Automotive Systems, Inc. by telephone or mail, provide the following information: name, name of business, business telephone number and business address. Additional information needed when ordering: description of parts and part numbers. UNIVERSAL MEASURING SYSTEM F Block Vertical Scales Ladder Extension (Optional) Sockets Vertical Receptacles Overhead Bar Telescoping Tram G Block Rigid Tram Scale Guide Scale Centerline Bar ( or 8 Inch) Asymmetrical Scale Holder (Optional) Vertical Legs 8 Datum Bars Secondary Ladder Cones Vertical Scale Holders Ball Joint Locator (Optional) Main Ladder Tape Main Ladder

4 Refer to this page for systems manufactured from extrusions A and B shown below. For other extrusions, see Page. B A Main Ladder Assembly (Part No. 09) Secondary Ladder Assembly (Part No. 099) A B End view of extrusions used to manufacture systems with serial numbers 09, 00 and up. 09 Main Ladder Assembly, Complete (N/S) 098 UMS Main Ladder Tape 09 Tape Guide, Nylon, x / 008 SHCS Black, / x / 099 Secondary Ladder Assembly (N/S) 09 SHCS Assembly, / x / (N); Knob 09 SHCS Assembly, / x ; Knob 00 Washer, /, Flat, SAE 08 Plate, Adjustable, BA, /8 x / x 8

5 Centerline Bar Assemblies End view of extrusion used to manufacture systems with serial numbers 09, 00 and up. Main Ladder (Left Side) Included in 09 and 09 are: per centerline bar, 09 Socket Head Capscrew Assembly / x / (N); Knob. per centerline bar, 09 Socket Head Capscrew Assembly / x / (N); / Knob. Ref. Part No 09 Centerline Bar Assembly, 8 N/S 09 Centerline Bar Assembly, N/S

6 Vertical Leg Assembly (Right) Part No Vertical Leg Assembly (Left) Part No. 09 Ref. Part No. 09 Vertical Leg Assembly, LH CMP 09 Vertical Leg, LH Only 008 Plate, BA, /8 x / x ALMFLT 00 Washer, /, Flat, SAE 099 SHCS Assembly, / x /; Knob 0900 Vertical Leg Assembly, RH, CMP 098 Vertical Leg, RH Only 008 Plate, BA, /8 x / x ALMFLT 00 Washer, /, Flat, SAE 099 SHCS Assembly, / x /: Knob

7 Vertical Leg (LH) Overhead Bar/Mounting Assembly Part No,. 09 Vertical Leg (RH) 8 Rigid Tram Assembly Part No Overhead Bar And Mounting Assembly 09 Overhead Bar Sub-Assembly 09 SHCS Assembly, / x /; Knob 00 Washer, /, Flat, SAE 00 Clamp,, BA 0909 Spring, Complete, / x / 00 Clamp, x x.90, ALMFLT BA 0 Sleeve, /8 with /-0 Threaded 8 09 SHCS Assembly, / x : Knob 0900 Rigid Tram Assembly, Complete 0900 Rigid Tram Sub-Assembly 098 Vertical Scal Holder, HLE Assembly (See Page 9 for Piece Parts) 0908 Scale Guide Assembly 09 Guide, / x x., ALMFLT, BA 08 Clamp,, BA, D# 00 Washer, /, Flat, SAE 09 SHCS Assembly, / x /: Knob SHCS Black, /-0 x / BOP 9 09 SHCS Assembly, / x / (N); Knob 9 8

8 Telescoping Tram Assembly Part No Telescoping Tram, Complete 090 Telescoping Tram Assembly 0 Tube, CA, /8 OD x.0w x, ALTB 090 SHCS Assembly, x / (N); / Knob 0 Collar, BA, OD x.8w., ALTB 0 Pointer, CA, / Diameter x, ALRD 0 Bracket, BA, Square x. ALM Square 00 SHCS, Black, / x 8 00 Washer, /, Flat, SAE SHCS Assembly, / x /: Knob 8 Vertical Scale Guide Assembly Part No Scale and Scale Guide Assembly 0908 Scale Guide Assembly 09 Guide, / x x., ALMFLT, BA 08 Clamp,, BA, D# 00 Washer, /, Flat, SAE 09 SHCS Assembly, / x /: Knob 009 SHCS Black, /-0 x. BOP 09 SHCS Assembly, / x / (N); Knob Scale Assembly, 0/mm.00

9 Vertical Scale Holder Assemblies Part Nos. 09, 098 Vertical Scale Vertical Scale Receptacle Vertical Scale Holder, HLE Assembly 0 Vertical Scale Holder, HLE, BA, D#0 009 Plate, BA, /8 x / x, ALMFLT 00 Washer, /, Flat, SAE Decal, 0mm 09 SHCS Assembly, / x /; Knob 098 Vertical Scale Holder, HLE Assembly 0 Vertical Scale Holder, HLE, BA, D#0 009 Plate, BA, /8 x / x, ALMFLT 8 00 Washer, /, Flat, SAE 9 09 SHCS Assembly, / x /; Knob 8mm Datum Bar Assembly Part No mm Datum Bar Assembly mm Datum Bar Sub-Assembly 00 Plate, BA ALFLT, /8 x / x. 00 Washer, /, Flat, SAE 09 SHCS Assembly, / x ; / Knob 00 Scale Holder,., BA, D#0 09 SHCS Assembly, / x / (N) Knob

10 Cones, Fittings, X and K Body Adapters C-Cone 098 B-Cone 098 A-Cone 0908 Spring, Compression, / x / 098 F Block 098 G Block Assembly 098 #9 Socket (Black) #0 Socket # Socket (Black) # Socket 098 # Socket (Black) 0988 # Socket 0989 # Socket (Black) 0980 # Socket 098 # Socket (Black) 098 #8 Socket 098 #9 Socket (Black) # Socket (Black) # Socket # Socket 0900 X-Body Clamp Adapter 08 K-Body Clamp Adapter 8

11 Vertical Scale Receptacles Vertical Scales Optional Vertical Scale Receptacle Vertical Scale (0-,000mm) 098 Receptacle/Scale Assembly 0980 Receptacle Assembly 0980 Scale Assembly (Tape 8/0mm) 098 Receptacle/Scale Assembly 0980 Recptacle Assembly 0980 Scale Assembly (Tape 08/0mm) 098 Receptacle Scale Assembly 0980 Receptacle Assembly Scale Assembly (Tape /0mm) 098 Receptacle/Scale Assembly 0980 Receptacle Assembly Scale Assembly (Tape 0/8mm) 098 Receptacle/Scale Assembly 0980 Receptacle Assembly 0980 Scale Assembly (Tape 8/mm) 098 Receptacle/Scale Assembly 098 Receptacle Assembly 098 Scale Assembly (Tape /90mm) 090 SHCS Assembly, / x / (Nylon), / Knob 98 Receptacle/Scale Assembly ( only) 988 Receptacle Assembly 980 Scale Assembly (Tape 0/000mm) 090 SHCS Assembly, / x / (Nylon) / Knob 9

12 Optional Ball Joint Locator Part No. 9 9 Ball Joint Locator Assembly Pointer Guide, BA,, D#0 090 Washer, Steel, AN, #90-L Pointer, CA, / x / x, ALMFLT 098 SHCS assembly, / x /; Knob 0 Nut, /, Rounded and Machined Centerline Bar Optional Asymmetrical Vertical Scale Holder Part No. 9 Centerline Bar 9 Asymmetrical Vertical Scale Holder 0 Scale Holder/Tape Assembly 8 Guide, BA,., D#8 09 SHCS Assembly, / x /; Knob 00 Washer, /, Flat, SAE 00 Plate, BA, ALFLT, /8 x / x. 09 SHCS Assembly, / x / (N); / Knob 0

13 Optional Ladder Extension Assembly Part No. 9 9 Ladder Extension Assembly, N/S 9 Ladder Extension, N/S Adjustable Ladder Support Bar Assembly * Insert Bar (Right) * Insert Bar (Left) * 0 Flat Head Hex Socket Screw, /-0 x / Not 0 Set Screw (For Connecting Extension to Main Ladder) Shown * Part Of Assembly # Adjustable Ladder Support Bar Part No Adjustable Ladder Support Bar Assembly Ladder Support Bar Outside Tube 09 SHCS Assembly, / x /, Knob 0809 Hex Nut, /-0, Gr. 8, Plated 088 Inside Tube, Adjustable Ladder 00 SHCS, Black, /-0 x /8, Lg.

14 Optional Upper Body Measuring Assembly Part No. 9 Upper Body Tram Block Door Probe Upper Body Tram Receptacle and Scale Assembly Asymmetrical Vertical Scale Holder Upper Body Tram Block Assembly Upper Body Tram Block Assembly (Left) Upper Body Tram Block Assembly, Right Half 9 Upper Body Tram Block Assembly, Left Half Upper Body Tram Block, Right Half Upper Body Tram Block, Left Half 008 Plate, BA, /8 x / x, ALMFLT 09 SHCS Assembly, / x / (N); / Knob 09 SHCS Assembly, / x ; Knob 09 SHCS Assembly, / x /; Knob 00 Washer, /, Flat, SAE Decal, Read At Top Decal, Left Side Decal, Serial Number, UMS Upper Body

15 Optional Upper Body Measuring Package (continued) Vertical Receptacle/Vertical Scale Assembly Upper Body Tram 90 Upper Body Tram Tape, 9mm x 0, 0-9mm, / 00 Rigid Tram Plug, End, Red Door Probes 9 Vertical Scale Receptacle/Scale Assembly 9 Scale Assembly 0980 Receptacle Assembly 090 SHCS Assembly, / x / (N); / Knob 90 Door Probe Assembly, Long 90 Door Probe Assembly, Short NOTE: The Asymmetrical Vertical Scale Holder provided with the Upper Body Measuring Assembly is shown on Page of this Parts Manual.

16 Decals Part No (Includes Nos. 0-) SET LENGTH ON LEFT SIDE READ at TOP READ AT THIS EDGE READ at TOP LEFT SIDE -90 mm 8-mm 0-8 mm -0 mm 0 0mm YY X Z 08-0 mm 8-0 mm VERTICAL SETTING: Subtract mm A B C E F G Decal, Set Length On Left Side 090 Decal, Read At Top 090 Decal, Read At Top 0909 Decal, Read At This Edge 0900 Decal, Left Side Decal, 0mm 0900 Decal Set 8 X Y Z Decal, Vertical Setting Decal, Set Ladder Support Bar Decal, UMS Tool Box

17 Optional Diagnostic Worksheet (Lower Body/Underhood) Part No. 09 (Actual size 8 / x inches) DAMAGE DATUM CENTERLINE LENGTH Spec. Measures Repair Spec. Measures Repair Spec. Measures Repair Hours Hours Hours DATUM CENTERLINE LENGTH Sub Total Here Sub Total Here Sub Total Here Form DW-LB/U /9 99 Chief Automotive Systems, Inc. Part No. 09 UPPER BODY TOTAL HOURS (++)

18 Optional Diagnostic Worksheet (Upper Body) Part No. 09 (Actual size 8 / x inches) DAMAGE DATUM CENTERLINE LENGTH Location Right Left Repair Right Left Repair Right Left Repair Hours Hours Hours DATUM CENTERLINE Sub Total Sub Total LENGTH Sub Total TOTAL HOURS (++) CAMBER STRUT TOTAL Comparator Angles Spec. Reads Spec. Reads Spec. Reads Diagnosis Front Rear Comments: Prepared By: Form DW-UB /9 99 Chief Automotive Systems, Inc. Part No. 09

19 P.O. Box 8 Grand Island, Nebraska Ph Fax INTAIRCO S.A.R.L. CA de TREMBLAY CHARLES DE GAULLE 8, rue Henri FARMAN 99 TREMBLAY EN FRANCE CEDEX TEL 0 80 FAX Chief reserves the right to alter product specifications and/or package components without notice. Form UMSPM (Rev. /0) Part No. 000