CATALOGUE OF ORGAN BLOWERS OF TYPE LVM USA
|
|
|
- Chad Stevens
- 6 years ago
- Views:
Transcription
1 CATALOGUE OF ORGAN BLOWERS OF TYPE LVM USA HUNGARY, H-9061 Vámosszabadi, Hild József u. 5. Tel.: 00 36/ Tel./Fax: 00 36/ Information: GSM: 00 36/
2 Co nte nt s History 3 Organ blowers of type LVM4 4 Technical data 5 Dimensions for mounting 6 Organ blowers of type LVM 7 Technical data 8 Dimensions for mounting 9 Wiring diagram 10 Organ blowers of type LVM2 11 Technical data 12 Dimensions for mounting 13 Wiring diagram 14
3 H i s t o r y Our Company manufactures organ blowers developed and designed by ourselves since The organ blowers are high-class Hungarian product. The organ blowers are developed and designed specifically for producing air of pressure of 750 to PA specifically required for operation of organs, but we are able to fulfill other requirements on request, as well. We manufacture motors of various dimensions with rotation speeds of and rpm. their detailed technical descriptions are presented in the catalogue. Our variety of products enables to build a proper blower into any organ. As regards the noise level, quality and design, our motors compete with those of even the most renowned European manufacturers. The housing of organ blowers of types LVM and LVM2 is made of cast aluminium. The housing of organ blowers of type LVM4 is made of sheet-steel with welding. The inside of housing is covered with noise isolating and vibration damping lining. The inlet chamber is made of sheet-steel with welding. It is provided with a noise isolating and vibration damping lining and a closing trap and guard on the lower side. The electric motors are results of our own development and design. They are single-phase or rotary-current asynchronous motors of very little noise provided with sleeve-bearings. The foot is made of cast aluminum and provided with 4 rubber legs. The outside surface of blowers is painted with Hammerite paint of silver color. We provide guarantee of 3 years for organ blowers of types LVM, LVM2 and LVM4. Our organ blowers are sold all over the world.
4 ORGAN BLOWERS OF TYPE LVM4 HUNGARY, H-9061 Vámosszabadi, Hild József u. 5. Tel.: 00 36/ Tel./Fax: 00 36/ Information: GSM: 00 36/
5 ORGAN BLOWERS OF TYPE LVM4 TECHNICAL DATA 1680 rotations/minute / 60 cycles Wind pressure: Pa TYPE Wind production Wind pressure Motorpower Net weight app. For organ stops up to app. 3-ph. A.C., 208 V 1-ph. A.C., 240 V CFM Pa inch h.p. kw pound LVM /208 LVM / /4 0,53 0,4 200,62 LVM /208 LVM / /4 0,76 0,57 216,05 LVM /208 LVM / /4 1 0,75 251,33 LVM / /4 1,6 1,2 271,17 LVM / /4 2,01 1,5 282,19 LVM / /4 2,54 1,9 365,97 LVM / /4 3 2,25 370,38 LVM / /4 3,62 2,7 372,58 Other wind productions and wind pressures on request. We can supply other shape too: vertically down or up. Further information upon request. H-9061 Vámosszabadi, Hild J. u. 5. Tel.: +36/ Fax: +36/ Info: GSM: +36/
6 6 ORGAN BLOWERS OF TYPE LVM4 DIMENSIONS 1680 rotations/minute / 60 cycles Wind pressure: Pa Unit: Inch (in) TYPE 3-ph. A.C., 208 V 1-ph. A.C., 240 V A B C D E F G H I K L M N O P R S LVM /208 LVM / /4 17-3/4 29-9/32 7-7/8 13-5/8 19-1/2 25-5/8 4-23/32 7-9/ /64 6-5/ /32 3-5/ / / /32 LVM /208 LVM / /4 17-3/4 29-9/32 7-7/8 13-5/ / /8 5-29/32 7-7/ /8 7-7/8 5-1/2 5-7/ / / /32 LVM /208 LVM / / /8 32-3/64 7-7/ / /4 30-7/8 7-3/32 8-7/ / /4 8-21/32 7-7/8 6-5/ /4 16-5/16 LVM / / /8 32-3/64 7-7/ / /4 30-7/8 7-3/32 8-7/ / /4 8-21/32 7-7/8 6-5/ /4 16-5/16 LVM / / /8 32-3/64 7-7/8 15-3/4 24-1/ /4 7-3/32 8-7/ / /4 8-21/32 7-7/8 6-5/ /4 16-5/16 LVM / /8 25-3/ /2 7-7/8 15-3/4 26-3/8 35-7/16 9-7/ / / / / / / / /8 21-1/4 LVM / /8 25-3/ /2 7-7/8 15-3/4 26-3/8 35-7/16 9-7/ / / / / / / / /8 21-1/4 LVM / /8 25-3/ /2 7-7/8 15-3/4 26-3/8 35-7/16 9-7/ / / / / / / / /8 21-1/4 H-9061 Vámosszabadi, Hild J. u. 5. Tel.: +36/ Fax: +36/ Info: GSM: +36/
7 ORGAN BLOWERS OF TYPE LVM HUNGARY, H-9061 Vámosszabadi, Hild József u. 5. Tel.: 00 36/ Tel./Fax: 00 36/ Information: GSM: 00 36/
8 ORGAN BLOWERS OF TYPE LVM TECHNICAL DATA 3360 rotations/minute / 60 cycles Pressure range: Pa TYPE Wind production Pressure range Motorpower Net weight app. For organ stops up to app. 1-ph. A.C., 120 V 1-ph. A.C., 240 V CFM Pa inch h.p. kw pound LVM /120 LVM / /16 0,2 0,145 44,09 LVM /120 LVM / /4 0,2 0,145 44,09 LVM /120 LVM / /8 0,25 0,185 50,71 LVM /120 LVM / /32 0,45 0,330 61,72 LVM /120 LVM / /8 0,65 0,496 70,54 LVM /120 LVM / /8 0,8 0,595 79,36 LVM /120 LVM / /8 1 0,755 94,79 - LVM / /32 0,6 0,435 78,26 H-9061 Vámosszabadi, Hild J. u. 5. Tel.: +36/ Fax: +36/ Info: GSM: +36/
9 9 ORGAN BLOWERS OF TYPE LVM DIMENSIONS 3360 rotations/minute / 60 cycles Wind pressure: Pa Unit: Inch (in) TYPE 1-ph. A.C., 120 V 1-ph. A.C., 240 V A B C D E F H I K M N R S T U V LVM /120 LVM / /32 7-5/ / / / /8 9-3/64 2-5/64 3-5/ / / /32 2-3/4 6-29/ / /64 LVM /120 LVM / /32 7-5/ / / / /8 9-3/64 2-5/64 3-5/ / / /32 2-3/4 6-29/ / /64 LVM /120 LVM / /64 7-5/ / / / /16 9-7/16 3-1/ / /64 5-7/ / / / / /64 LVM /120 LVM / / / / / / / / / / / / /32 7-1/4 5-7/64 5-7/64 LVM /120 LVM / /8 9-27/ / / / /8 9-27/32 4-1/8 4-17/32 6-3/32 6-3/ /64 7-1/4 5-35/ /64 LVM /120 LVM / / / / / / / / / / /64 6-1/2 7-19/32 5-5/16 7-1/4 5-29/ /32 LVM /120 LVM / / / / / / / /8 5-15/ /64 7-9/ / /64 6-3/32 7-1/4 6-19/ /16 - LVM / /32 7-5/ / / / / /8 2-3/4 2-3/ / / /64 3-5/ /64 3-7/ /64 H-9061 Vámosszabadi, Hild J. u. 5. Tel.: +36/ Fax: +36/ Info: GSM: +36/
10 WIRING DIAGRAM OF ORGAN BLOWERS OF TYPE LVM HUNGARY, H-9061 Vámosszabadi, Hild J. u. 5. Tel.: 00 36/ Fax: 00 36/ Mobil: 00 36/ web:
11 ORGAN BLOWERS OF TYPE LVM2 HUNGARY, H-9061 Vámosszabadi, Hild József u. 5. Tel.: 00 36/ Tel./Fax: 00 36/ Information: GSM: 00 36/
12 ORGAN BLOWERS OF TYPE LVM2 TECHNICAL DATA 3360 rotations/minute / 60 cycles Wind pressure: Pa Wind pressure Motorpower Net weight app. pound 1-ph. A.C., 120 V For reed organ sets app. Pa inch h.p. kw LVM2/ / /64 0,09 0,067 19,84 LVM2/ / /64 0,09 0,067 19,84 LVM2/ / /64 0,09 0,067 23,14 LVM2/ / /8 0,11 0,084 24,25 LVM2/ / /8 0,11 0,084 24,25 LVM2/ / /8 0,11 0,084 27,55 Wind production CFM TYPE For organ stops without 16 app. H-9061 Vámosszabadi, Hild J. u. 5. Tel.: +36/ Fax: +36/ Info: GSM: +36/
13 13 ORGAN BLOWERS OF TYPE LVM2 DIMENSIONS 3360 rotations/minute / 60 cycles Wind pressure: Pa Unit: Inch (in) TYPE 1-ph. A.C., 120 V A B C D E F G H I K L M N LVM2/ / / / /32 3-1/ / /64 3-1/32 2-3/ /64 - LVM2/ / / / /16 3-1/ / /64 3-1/32 2-3/ /64 3-1/32 LVM2/ / / /32 9-7/16 7-3/ /8 3-1/ / /64 3-1/32 2-3/ /64 - LVM2/ / /8 13-3/ /8 6-6/8 4-1/32 2-3/64 2-3/4 4-1/32 3-5/ /64 - LVM2/ / /8 13-3/ /8 6-57/64 4-1/32 2-3/64 2-3/4 4-1/32 3-5/ /64 3-1/32 LVM2/ / /8 13-3/ /32 7-3/64 6-1/8 9-7/16 4-1/32 2-3/64 2-3/4 4-1/32 3-5/ /64 - H-9061 Vámosszabadi, Hild J. u. 5. Tel.: +36/ Fax: +36/ Info: GSM: +36/
14 WIRING DIAGRAM OF ORGAN BLOWERS OF TYPE LVM2 HUNGARY, H-9061 Vámosszabadi, Hild J. u. 5. Tel.: 00 36/ Fax: 00 36/ Mobil: 00 36/ web:
Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
fan solutions for residential, commercial and industrial applications
fan solutions for residential, commercial and industrial applications Eighty Years and Growing. From Past to Present HEATING AIR CONDITIONING VENTILATION REFRIGERATION Responding with solutions to the
Portable HEPA System
Operation and Maintenance Manual Portable HEPA System Series - PHS MONOXIVENT - SOURCE CAPTURE SYSTEMS - info@ Oct. - 2015 PORTABLE HEPA SYSTEM GENERAL INFORMATION SAFETY PRECAUTIONS: Keep all paper work
Data sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
50 HERTZ METRIC BLOWER
CAPACITIES 50 HERTZ METRIC BLOWER Pressure Range 500mm 20 wc 12 osi 700mm 27 wc 16 osi 900mm 35 wc 20 osi 1100mm 43 wc 24 osi Model Number TBA 500-1.5 TBA 500-2.2 TBA 500-3 TBA 500-4 TBA 500-5.5 TBA 500-
YKK High-voltage Three-phase Asynchronous Motor
YKK High-voltage Three-phase Asynchronous Motor 1. PRODUCT INTRODUCTION YKK series medium-sized high-voltage three-phase asynchronous motor, the motors are news products that our company made on the basis
Standard features. Optional features
FABRIQUÉ AU CANADA MADEIN CANADA Standard features 3/8 inch inner grooved copper tubing up to 5 fan long units. Reduced refrigerant charge with high heat-transfer. Tube sheets with oversized holes and
Submittal Data 3450 RPM 60 Hertz JOB or CUSTOMER:
Redi-Flo4 Environmental Submersible Pumps 5E Submittal Data 3450 RPM 60 Hertz JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: APPROVED BY: ORDER NO: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM
Standard features. Optional features
FABRIQUÉ AU CANADA MADEIN CANADA Standard features 3/8 inch inner grooved copper tubing up to 5 fan long units. Reduced refrigerant charge with high heat-transfer. Tube sheets with oversized holes and
HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS
HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS OUR COMMITMENT TO THE ENVIRONMENT Sodeca has begun a new stage of study and design of new trends in ventilation which will help to preserve the environment and
AC Fans. AC Fans Overview 117. AC Axial Fans 118. AC Radial Fans 138. Technology. DC Axial Fans. DC Radial Fans. Specials. ACmaxx Axial Fans.
4 AC Fans AC Fans Overview 7 AC Axial Fans 8 AC Radial Fans 38 AC Radial Fans AC Axial Fans AC Fans ACmaxx Axial Fans Technology DC Axial Fans Specials DC Radial Fans 5 Accessories AC Fans Technical Informations
Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
TRIVAC NT 16 and NT 25
TRIVAC NT 16 and NT 25 idealvac.com (505)872-0037 idealvac.com TRIVAC NT 16 Type DN a b b1 c h h1 h2 l m n o NT 16 1) mm 25 KF 32 175 137 135 243 227 261 540 280 140 132 in. 25 KF 1.26 6.89 5.39 5.31 9.57
UNIVERSAL PRODUCTION EDGE BELT SANDERS
UNIVERSAL PRODUCTION EDGE BELT SANDERS Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing
Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
AXIAL FANS Catalogue CN0050C01 May 2008
ADTA AXIAL FANS Catalogue CN0050C01 May 2008 ADTA AXIAL FANS Catalogue CN0050C01 May 2008 Construction Specifications Impellers: Breezax aerfoil blades are available in four types of material: Glass Reinforced
SuperBlower filter ATEX. Operating range. Surface. Connection HPBS side channel blower: Inlet. HPBS filter control system:
01.01.2011 The is an under- and over-pressure filter designed to run in constant operation. Constructed as a self-supporting sheet metal construction in high tensile steel modules. Process air is passed
TECHNICAL CATALOGUE SELF CONTAINED HORIZONTAL AIRCONDITIONERS Rev105
TECHNICAL CATALOGUE WPHA Cooling only WPHBA Heat pump Models 091, 121, 141, 171, 201, 251, 351, 401, 501, 701, 751, 1001, 1201 Cooling capacities from 2,4 kw to 41 kw Heating capacities from 2,8 kw to
CIRCULATION HEATERS SPECIFICATIONS DESCRIPTION FEATURES CH & CHP SERIES HEAT EXCHANGE AND TRANSFER, INC. 6 to 480 kw and higher. Flanged construction
SPECIFICATIONS 6 to 480 kw and higher CIRCULATION HEATERS CH & CHP SERIES Flanged construction 208 volt through 575 volt, 3 phase 5 to 40 watts/in 2 and higher NEMA 4/12 Terminal housing DESCRIPTION Type
Sankosha Finishing Solutions. Laundry
Sankosha Finishing Solutions Laundry LP-590U Single Buck Shirt Press Superior Quality LP-690U Single Collar Cuff Press Tensioning Type Sleeve Arm Up/Down Function Our newly designed sleeve arms now move
Specifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).
Specifications Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Housings: PP* Single block strong high density UV treated and
LOW STATIC FAN COIL UNITS District Cooling Chilled Water Application
STATIC FAN COIL UNITS District Cooling Chilled Water Application CLASSIFIED INSULATION & FILTER MEDIA GFC LD Series Cooling Capacity Range 9,690 yo 46,064 BTU/HR (4 ROWS ) GFC-LD-TC-10-13 3 General Specifications
Temperature Measurement Resistance thermometers
Temperature transmitters for mounting in the connection head The following temperature transmitters are available for mounting in the connection head: SITRANS TH100 Programmable two-wire temperature transmitter
CM5-5 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM5-5 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686818 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686818/cm5-5-a-r-a-e-avbe.html
COIL OVER FITTING HARDWARE
COIL OVER FITTING HARDWARE COIL OVER PRODUCTS www.toperformance.com.au HIGH QUALITY FITTING HARDWARE Lower Spring Seats Threaded Sleeve FH1006 Internal Diameter 42.2mm / Length 75mm Threaded Universal
PROPOSAL. Fume-A-Vent 4 Drop Source Capture Diesel Fume Extraction System for Firehouse/EMS
PROPOSAL Page 1 of 2 826 HORAN DRIVE FENTON, MO 63026 Phone: (636) 349-4400 Fax: (636) 349-0556 http://www.aircleaningspecialists.com Order Number: Order Date: Salesperson: Customer Number: 0084040 9/20/2017
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E Speed-up and Splitter Gearboxes Contents General Information 4-5 Speed-up Gearboxes Series 60000-10 kw
LAYCOCK SYSTEMS, INC North 43rd Street, Tampa, FL 33605
LAYCOCK SYSTEMS, INC. 1601 North 43rd Street, Tampa, FL 33605 Ph: 813-248-3555 / Fax: 813-242-0514 Email: sales@laycocksystems.com / Web: www.laycocksystems.com INSTRUCTIONS FOR AIR OPERATED COIL WINDING
SIL Inline Single Stage Centrifugal Pumps
SIL Inline Single Stage Centrifugal Pumps SIL Inline Pump Range True Reliability Sulzer s new inline pump range (SIL) has been designed to fulfill efficiency regulations across all industries and also
NCF 60 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
Unobox units with backward curved centrifugal impellers
Unobox Fans Unobox units with backward curved centrifugal impellers Type Code UNO 67-450 -4 E W Unobox Box size 50=500mm ; 67=670mm 80=800mm ; 102=1020mm Impeller diameter Number of poles D - Three Phase
Armatures and Heaters
Armatures and Heaters - more than functional I n d e K l i m a M i l j ø A / S IndeKlimaMiljø A/S, or just, takes advantage in many years of experience as well internally as with our partners and suppliers
Innovative Engineering. Catalogue. Condenser. ECU, ECV and ECW Industrial Condenser Series. Technical Brochure
Innovative Engineering Catalogue Condenser ECU, ECV and ECW Industrial Condenser Series Technical Brochure Product range Applicable for all HFC refrigerants Series Capacity kw Fin Spacing Air-flow direction
MB Series AC Centrifugal Blowers
MB Series AC Centrifugal Blowers Impeller Diameter 6.3 in. dia. ( 16 mm) SAFETY STD. AC INPUT Specifications c Materials Motor Case: Casing: Impeller: Aluminum Voltage Frequency Current Input Power Max.
PARTS LIST FOR AIR COMPRESSOR/GENERATOR/WELDER AGW-SR14-30M AGW-SR14-B
PARTS LIST FOR AIR COMPRESSOR/GENERATOR/WELDER AGW-SR14-30M AGW-SR14-B ENGINE: SUBARU ENGINE OIL GRADE: SAE 10W-30 ENGINE OIL CAPACITY: 40.5 oz. MAXIMUM PRESSURE: COMPRESSOR OIL GRADE: COMPRESSOR OIL CAPACITY:
HDP Series. Hydraulic Gear Pumps. high performance, custom design, low noise emission, high efficiency...
HDP Series Hydraulic Gear s high performance, custom design, low noise emission, high efficiency... www.hidrocel.com.tr 1 Contents Design of HDP s Range and characteristics HDP 3/61 ISO HDP 3/61 UNI HDP
Brochure Hydraulic Pumps, Hydraulic Parts
www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr
BIFLOW SB CON Product Brochure
BIFLOW SB CON Brochure Available for next day delivery with ELTA SELECT Bifurcated Conical Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
Duct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ
Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3
NCF fans 50 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
CRN A-F-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN32-1-2 A-F-G-V-HQQV 3x4/69 5 HZ Grundfos pump 96122396 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn32/96122396/crn-32-1-2-a-f-g-v-hqqv.html
Engineering Data Book
40VMA Outside Air Processing Unit for Variable Refrigerant Flow (VRF) Systems Engineering Data Book Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without
Rotary heat exchangers
Rotary heat exchangers Introduction Among the available energy recovery systems, the rotary heat exchangers ensure the best efficiency, ranging from 60% to 90%, depending upon operating conditions. This
EKOS & EKOS PLUS. patented
aluminium radiators EKOS & patented i r r e s i s t i b l y r o u n d e d Global has manufactured aluminium radiators since 1971 and has reached an experience in the area of aluminium radiators that always
TRIVAC NT, Two-Stage Rotary Vane Vacuum Pumps TRIVAC NT 5 to NT 25
TRIVAC NT, Two-Stage Rotary Vane Vacuum Pumps TRIVAC NT 5 to NT 25 (505)872-0037 The TRIVAC NT is the latest generation of well-proven rotary vane pumps. The performance and handling characteristics of
CM10-3 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-3 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686946 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686946/cm1-3-a-r-a-e-avbe.html
AFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)
AFA TS GmbH - Werner von Siemens Str.3 - D-72661 Grafenberg Copyright 2009 Tel.: +49(0)7123-97382-0 - Fax: +49(0)7123-97382-90 - E-Mail: mail@afa-ts.de Page 1-15 www.afa-ts.com Exhaust Extraction Systems
CR45-3 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR45-3 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos pump 9612281 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9612281/cr-45-3-a-f-a-e-hqqe.html
Bennett Pump Company
Bennett Pump Company SB-100 Meters Operation, Service & Parts Manual Only Trained Personnel May Work on This Equipment For more information, please contact: Jim Biesecker, Component Sales 1218 E. Pontaluna
.3 Section Vibration Isolation and Seismic Control..2 ANSI/AMCA 210/ASHRAE 51 Laboratory Methods of Testing Fans for Rating.
Issued 2005/06/01 Section 15831 Commercial Fans Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal..2 Section 15053 Motors, Drives and Guards..3 Section 15072
SQBI BLOWERS BACKWARD INCLINED CLASS II CLASS IIP CLASS III. OEM and Industrial Air Handling Specialist
OEM and Industrial Air Handling Specialist SQBI BLOWERS BACKWARD INCLINED CLASS II CLASS IIP CLASS III 7697 Snider Road, Mason, OH 4040-913 Telephone: 13-73-0600 Visit us at www.cincinnatifan.com for more
CR A-F-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR6-1-1 A-F-A-E-HQQE 3xD 5 HZ Grundfos pump 96123526 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/96123526/cr-6-1-1-a-f-a-e-hqqe.html
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
From 16 June 2011, motors placed for the first-time on the market shall have a minimum efficiency class of IE2.
INTRODUCTION New efficiency classes for the low-voltage three-phase motors (IE = International Efficiency). Along with the international discussion on energy efficiency a worldwide harmonized energy efficiency
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
CRN120-3 A-F-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN12-3 A-F-G-V-HQQV 3x4/69 5 HZ Grundfos pump 9592221 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn12/9592221/crn-12-3-a-f-g-v-hqqv.html
CR15-14 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR15-1 A-F-A-E-HQQE 3x/69 5 HZ Grundfos pump 965193 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/965193/cr-15-1-a-f-a-e-hqqe.html
Dynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
HS18 HS18 SERIES CONDENSING UNITS EXPANSION VALVE AIR CONDITIONING SYSTEM. 3.6 to 16.0 kw ( to Btuh) Cooling Capacity ENGINEERING DATA
ENGINEERING DATA ENGINEERING DATA MATCHED CONDENSING REMOTE SYSTEMS UNITS 50hz HS18 SERIES CONDENSING UNITS EXPANSION VALVE AIR CONDITIONING SYSTEM 3.6 to 16.0 kw (12 200 to 54 700 Btuh) HS18 Bulletin
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
RIELLO 40 F SERIES. One Stage Light Oil Burners FIRING RATES LIGHT OIL. F kw F kw F kw
The Riello 40 F series of one stage light oil burners, is a complete range of products developed to respond to any request for light industrial applications. The Riello 40 F series is available in three
Sabre Plate Mounted Sickle Fans (VSP)
Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation
2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
CRN5-22 A-P-G-V-HQQV 3x400D 50HZ
GRUNDFOS DATA BOOKLET CRN5-22 A-P-G-V-HQQV 3x4D 5HZ Grundfos pump 9651354 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn5/9651354/crn-5-22-a-p-g-v-hqqv.html
CR10-08 A-A-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR10-08 A-A-A-E-HQQE 3x400D 50 HZ Grundfos pump 96501230 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/96501230/cr-10-8-a-a-a-e-hqqe.html
Air Handling Units. Geniox. Accessories
Air Handling Units Geniox Accessories The right accessories are important to optimise your Geniox air handling unit to the task at hand. SystemairCAD provides you with a wide selection of accessories.
CRI15-04 A-FGJ-I-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRI15-4 A-FGJ-I-E-HQQE 3x4D 5 HZ Grundfos pump 9651913 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri15/9651913/cri-15-4-a-fgj-i-e-hqqe.html
CR5-18 A-FGJ-A-E-HQQE 3x400D 50HZ
GRUNDFOS DATA BOOKLET CR5-18 A-FGJ-A-E-HQQE 3x4D 5HZ Grundfos pump 96513388 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/96513388/cr-5-18-a-fgj-a-e-hqqe.html
300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
WELDING FUME EXHAUSTERS & ARMS
WELDING FUME EXHAUSTERS & ARMS The Ace 75 Series is our flexible and effective line of welding fume exhausters and extraction arms for shops that elect to exhaust their weld fumes outdoors instead of through
11 Control Panels, Distribution Panels and Components
Control Panels, Distribution Panels and Components Motor Switches Explosion protection to CENELEC IEC For use in Zone and Zone Isolator Motor switching capacity Rated working voltage up to Rated working
CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
FOX TrimAway INSTALLATION AND OPERATING INSTRUCTIONS FAMILIARIZE YOURSELF WITH THE SYSTEM COMPONENTS
FOX TrimAway INSTALLATION AND OPERATING INSTRUCTIONS FAMILIARIZE YOURSELF WITH THE SYSTEM COMPONENTS Check your shipment against the packing list, the original quote and the following drawings. Contact
SERIES 450 TABLES. MOD CHROMED LEGS Legs: chromed steel tube diam. 60 mm with adjustable feet.
SERIES 450 TABLES MOD. 450020 TABLE 20 Dimension: 80x50x76 h. 12 kg. 0,04 cu.m. MOD. 450092 CHROMED LEGS Legs: chromed steel tube diam. 60 mm with adjustable feet. MOD. 450045 TABLE 24 mm thick. with rounded
CRN10-09 A-FGJ-G-V-HQQV 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN1-9 A-FGJ-G-V-HQQV 3x4D 5 HZ Grundfos pump 9651394 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1/9651394/crn-1-9-a-fgj-g-v-hqqv.html
Precision Cooling For Business-Critical Continuity. Liebert CW. System Design Manual kW, 50 & 60Hz
Precision Cooling For Business-Critical Continuity Liebert CW System Design Manual - 26-181kW, 50 & 60Hz TABLE OF CONTENTS LIEBERT CW MODEL NUMBER NOMENCLATURE....................................1 1.0
Spring Mounts Damped Type To 200 lbs.
Spring Mounts Damped Type To 200 lbs. CO MP O NE NTS MATERIAL: Base Plate Mild Steel Spring igh-tensile Steel - Phosphated & Dyed Black End Cap Cast Light Alloy STAINLESS STEEL MES FOR LOADS OF 60 TO 200
Data sheet. Page: 1 / 7. ETL GG AV11D BKSBIE3M Inline pump. Operating data. Design
Data sheet Page: 1 / 7 Operating data Requested flow rate Requested developed head Pumped medium Ambient air temperature 20.0 C Fluid temperature 20.0 C Fluid density 998 kg/m³ Water Clean water Not containing
Propeller Fan BE Series
Propeller Fan BE Series ENCLOSED BELT DRIVEN WALL EXHAUST FAN THESE LOW PRESSURE BELT DRIVEN FANS ARE IDEALLY SUITED FOR VENTILATION OF UNDERGROUND GARAGES OF APARTMENT BUILDINGS, WAREHOUSES, PUBLIC BUILDINGS,
LIFTSON M-LIX L. LIFT-PUMP MODULES Domestic waste water 50 Hz Complies with standard EN RANGE OF APPLICATION APPLICATIONS ADVANTAGES
RANGE OF APPLICATION Flows up to: 40 m 3 /h Manometric head up to: 22 m Maximum water temperature: + 3 à 40 C Particle size: 45 mm Inlet pipe: DN 40/50/100/150 Outlet: DN 80 Vent: DN 70 LIFTSON M-LIX L
an ISO 9001 Company Bulletin BCPF 100 NEW Design 70 PLUG FANS CHICAGO BLOWER CORPORATION GLENDALE HEIGHTS, ILLINOIS USA
an ISO 9001 Company Bulletin BCPF 100 NEW Design 70 PLUG FANS New Energy Saving Wheel Mounted Motors to 125 HP Pre-Engineered Sizes to 60" Capacities to 156,000 CFM CHICAGO BLOWER CORPORATION GLENDALE
Centrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
REVOLUTION SLCX Product Brochure
REVOLUTION SLCX Brochure Available for next day delivery with ELTA SELECT ATEX Long Cased Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
Centrifugal Roof Supply Fans Models RSF and RSFP. Forward Curved
Centrifugal Roof Supply Fans Models and Forward Curved April 2008 Centrifugal Filtered Roof Supply Fan When you buy a Greenheck model or, you receive a fan with the industry s best performance and durability
PRO-BRACE HYDRAULIC FRAME
PRO-BRACE HYDRAULIC FRAME THE LEADING PRODUCER & DISTRIBUTOR OF TRENCH SHIELDING & SHORING EQUIPMENT SINCE 1995 Pro-Tec Equipment Pro-Brace Hydraulic Frame What is the Pro-Brace Hydraulic Frame? The Pro-Brace
STREET HIGH EFFICIENCY LED STREET LUMINAIRES MADE IN THE EU
STREET HIGH EFFICIENCY LED STREET LUMINAIRES MADE IN THE EU Address Contact info Šuceva 27, 4000 Kranj, Slovenia, EUROPE E-mail: luxtella@luxtella.com WWW.LUXTELLA.COM Tel: + 386 4 20 20 246 Fax: + 386
AC Commercial Fans Edition. ErP ready
AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application
PARTS LIST FOR AIR COMPRESSORS 15 Hp Industrial Duplex. Copyright 2009, Mi-T-M Corporation
PARTS LIST FOR AIR COMPRESSORS 15 Hp Industrial Duplex 1 This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Gasoline Air Compressor was constructed and designed with
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
Customised drive solutions
Customised drive solutions Electric motors & systems Drive components Services Introduction 03 Halm quality drive technology Over 50 years of experience in developing electric motors with asynchronous
Centrifugal Roof Supply Fans Models RSF and RSFP. Forward Curved
Centrifugal Roof Supply Fans Models and Forward Curved B U I L D I N G V A L U E I N A I R. April 2008 Centrifugal Filtered Roof Supply Fan When you buy a Greenheck model or, you receive a fan with the
PRIDE IN THE USA CRAFTED WITH. At DiamondBack Truck Covers, we re a team dedicated to rolling up our sleeves, getting
CRAFTED WITH PRIDE IN THE USA At DiamondBack Truck Covers, we re a team dedicated to rolling up our sleeves, getting dirty, and building quality products that make a difference. We re proud to have always
JCB DIESEL GENERATOR TECHNICAL SPECIFICATIONS
JCB DIESEL GENERATOR TECHNICAL SPECIFICATIONS G115QX G115X ELECTRICAL FREQUENCY VOLTAGE PRIME STAND BY 50Hz 3ph 400/230v 107.7kVA / 86.2kW 118.5kVA / 94.8kW 60Hz 3Ph 380/220v 102.0kVA / 81.6kW 111.9kVA
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
CRN1S-9 A-P-G-V-HQQV 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN1S-9 A-P-G-V-HQQV 3x23/4 HZ Grundfos pump 965168 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/965168/crn-1s-9-a-p-g-v-hqqv.html
MMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
Aerofoil Ventilation Fans. Fantek. Quality & Performance at Affordable Prices
Aerofoil Ventilation Fans Quality & Performance at Affordable Prices GENERAL FEATURES, located in Chennai strives to deliver quality products at affordable costs to all its customers. Our company s vision
BA series - brake motors. for wind turbine generators
series brake motors for wind turbine generators general information on MGM brake motors MGM brake motors are asynchronous three phase totally enclosed fan cooled motors. In case of power failure motors
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page - SPECIFICATIONS 200-201 SELECTION CHART 202 SELECTION CHART TABLE 203 TYPE KEY AND CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS