Combination pumps Type BKP
|
|
|
- Cameron Robertson
- 5 years ago
- Views:
Transcription
1 Combination pumps Type BKP Features Compact design Self-priming and venting (gear pump and BRK) Various combinations Combination with MRK Multi-outlet radial piston pump as MKP on request Design Combination pump consists of an external gear pump and a BRK (501, 502, 701, 702, 11 oder 12) pump from Bieri Each pump provided with a suction and connection BRK pump is coupled through an intermediate flange and coupling onto the gear pump (primary pump) Completely assembled Special combination with 2-fold gear pump available on request Applications For two different hydraulics circuits with different s and displacements Presses Lifting and advancing systems Technical Data Hydraulic fluid Fluid temperature range -20 up to 80 C Ambient temperature range -30 up to 50 C Mineral oil according to DIN (other fluids on request)) Viscosity range 12 to 220 mm 2 /s Max. operating Suction 500, 700 or 1000 bar -0,2 bar up to 0,5 bar relative Filtration (recommendation) According to NAS 1638 class 6 resp. ISO/DIN /15/12 Radial force / Axial force onto driving shaft Installation position Max. speed Direction of rotation Suction height Material see product information Not allowed Any 2000 rpm Clocwise Max. 500 mm Gear pump: Housing: aluminium Gear: steel Shaft: steel Radial piston pump: see data sheet BRK pumps
2 Ordering code Example BKP 501-0, , V - C 00 Combination pump (BRK pump) of the BRK pump Max. operating of the BRK pump [bar] of the gear pump see product inform. see product information see product information Special design (00 for Standard) Part index Please leave it blan (small letters a-z; different letters do not effect interchangeability) Design revision see dimension drawings (capital letters A-Z; identical letters equal same connecting dimensions) Max. operating of the gear pump [bar] see product information Seal material V [FPM] other seal materials on request Calculation of torque on BKP M Total = M BRK + M ZP p V BRK g BRK M BRK = 62,8 ηbrk Calculation of performance M ZP = p ZP V g ZP 62,8 ηzp M Torque [Nm] P Driving power [W] n Speed [rpm] V g p [bar] η BRK Efficiency BRK approx. 0,8 η ZP Efficiency ZP approx. 0,7 Degree of uniformity (see product info) p BRK V g BRK n P BRK = ηbrk P ZP = p ZP V g ZP n ηzp 2/9
3 Mounting 3/9
4 Product information combination gear pump Type 2SP with: BRK501, 701 or 11 Technical data gear pump Type 2SP, including adapter and coupling Type Dim. A Dim. B Dim. C Dim. K Dim. L Dim. H Dim. M A4 4, ,5 25,4 G 1/2 61,0 G 1/2 61, ,8 A6 6,0 54,3 213,8 27,0 G 1/2 61,0 G 1/2 61, ,9 A8 8,5 58,5 218,0 29,1 G 1/2 61,0 G 1/2 61, ,1 A11 11,0 62,6 222,1 31,2 G 1/2 61,0 G 3/4 65, ,4 A14 14,0 67,6 227,1 33,7 G 1/2 61,0 G 3/4 65, ,5 A16 16,5 71,8 231,3 35,8 G 1/2 61,0 G 3/4 65, ,6 A19 19,5 76,8 236,3 38,3 G 1/2 61,0 G 3/4 65, ,8 A22 22,5 81,8 241,3 40,8 G 1/2 61,0 G 3/4 65, ,9 A26 26,0 87,6 247,1 43,7 G 1/2 61,0 G 3/4 65, ,1 Note All combinations are possible. However, the woring conditions in regard to s and displacements for both pumps have to be determinded carefully so that the max. permissible torque of 98 Nm on the driving shaft is not exceeded. Observe direction of rotation! Technical data BRK , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,4 Technical data BRK , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,9 4/9
5 Technical data BRK , ,0 11 0, ,0 11 0, ,5 11 1, , ,0 11 1, ,0 11 1, ,0 11 2, ,5 11 2, ,5 11 2, ,5 Dimensional drawing BRK501/701 with gear pump Type 2SP Dimensional drawing BRK11 with gear pump Type 2SP 5/9
6 Product information combination gear pump Type 3SP with: BRK501, BRK701 or BRK11 Technical data gear pump Type 3SP, inclouding adapter and coupling Type Dim. A Dim. B Dim. C Dim. K Dim. L Dim. H Dim. M A22 22,3 82,9 268,8 41,5 G 3/4 75,0 G 1 80, ,1 A29 29,3 88,9 274,8 44,5 G 3/4 75,0 G 1 80, ,4 A33 32,9 91,9 277,8 46,0 G 3/4 75,0 G 1 80, ,5 A36 36,4 94,9 280,8 47,5 G 3/4 75,0 G 1 80, ,6 A44 43,5 100,9 286,8 50,5 G 3/4 75,0 G 1 80, ,9 A52 51,7 107,9 293,8 54,0 G 3/4 75,0 G 1 80, ,2 A62* 61,1 115,9 301,8 58,0 G 3/4 75,0 G 1 80, ,6 Note All combinations are possible. However, the woring conditions in regard to s and displacements for both pumps have to be determinded carefully so that the max. permissible torque of 240 Nm on the driving shaft is not exceeded. Observe direction of rotation! * only on request Technical data BRK , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,4 Technical data BRK , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,2 6/9
7 Technical data BRK , ,0 11 0, ,0 11 0, ,5 11 1, , ,0 11 1, ,0 11 1, ,0 11 2, ,5 11 2, ,5 11 2, ,5 Dimensional drawing BRK501/701 with gear pump Type 3SP Dimensional drawing BRK11 with gear pump Type 3SP 7/9
8 Product information combination gear pump Type 3SP with: BRK502, BRK702, BRK12 Technical data gear pump Type 3SP Type Dim. A Dim. B Dim. C Dim. K Dim. L Dim. H Dim. M A22 22,3 82,9 282,8 41,5 G 3/4 75,0 G 1 80, ,3 A29 29,3 88,9 288,8 44,5 G 3/4 75,0 G 1 80, ,5 A33 32,9 91,9 291,8 46,0 G 3/4 75,0 G 1 80, ,7 A36 36,4 94,9 294,8 47,5 G 3/4 75,0 G 1 80, ,8 A44 43,5 100,9 300,8 50,5 G 3/4 75,0 G 1 80, ,1 A52 51,7 107,9 307,8 54,0 G 3/4 75,0 G 1 80, ,4 A62* 61,1 115,9 315,8 58,0 G 3/4 75,0 G 1 80, ,8 Note: All combinations are possible. However, the woring conditions in regard to s and displacements for both pumps have to be determinded carefully so that the max. permissible torque of 240 Nm on the driving shaft is not exceeded. Observe direction of rotation! * only on request 502 4, , , , , ,8 Technical data BRK702 Technical Type BKP data BRK502 or 1000 bar HP: 500, 700 0,24 to [cm 8,14 3 /rev] cm 3 /rev 702 4, , , , , , , , , ,7 Technical data BRK , ,5 12 1, ,5 12 2, ,5 12 3, ,5 12 4, ,5 8/9
9 Dimensional drawing BRK502/702 with gear pump Type 3SP Dimensional drawing BRK12 with gear pump Type 3SP Bieri Hydrauli AG Könizstrasse 274 CH-3097 Liebefeld Tel Fax The information in this brochure relates to the operating conditions and applications described. For applications and operating conditions not described, please contact the relevant technical department. Subject to technical modifications. 9/9 BKP_1808
Special Radial piston pumps Type SRK-ATEX
Special Radial piston pumps Type SRK-ATEX Features High volumetric efficiency Self-priming and venting Low pulsation Low noise level Design Radial piston pump of modular design With valve controlled pump
Type KKP. Combination pumps
Features Compact and light Integrated low-pressure unloading valve and fail safe valve (not suitable for continuons rating) Can be started in maximum pressure mode Self-priming Direct installation of motor
Compact hydraulic power unit Type BKA
Compact hydraulic power unit Type BKA Single- and two-stage up to 700 bar Features Compact design Self-venting Various combinations possible Single- or two-stage models Design Integrated low-pressure unloading
Applications. mineral oil according to DIN (other fluids on request) at 25 l/min (fully open) and 32 mm 2 /s: 155 bar
Throttle valve 500 Type SDM up to 25 l/min Features High-precision control Adjustable while under pressure Bi-directional flow Design Cartridge alone or in manifolds External surface stainless The valve
Subplates (AP) and multi-station subplates
Subplates and multi-station subplates Type AP700/RP700/ EP700 to 25 l/min Features Subplates (AP) and multi-station subplates (RP) with threaded connections End plate (EP) Compact design up to six stations
Seated valve bidirectional Type WVM-4B-Bi
Seated valve bidirectional Type WVM-4B-Bi Features Bidirectional (flow of fluid in both directions, independently of pressure prof) Low pressure drop Direct operated Leakage free Good resistance to corrosion
Applications. NG 6 according to DIN 24340/ISO 4401 CETOP RP 121 H
Seated valves Type WV700 Features Direct operated Leakage free High duty cycle Long lifetime through hardened poppets and valve seats Positive overlap (exceptions see product information) Available as
Seated valve 500 Type WVM-4B NG 4 up to 12 l/min
Seated valve 500 Type WVM-4B Features Direct operated Leakage free Good resistance to corrosion As 2/2-, 3/2-, 3/3-, 4/2-* or 4/3-valve with solenoid or alternative actuation * pilot-operated Design With
Seated valve 500 Type WVM-4B NG 4 up to 12 l/min
Seated valve 500 Type WVM-4B Features Direct operated Leakage free Good resistance to corrosion As 2/2-, 3/2-, 3/3-, 4/2-* or 4/3-valve with solenoid or alternative actuation * pilot-operated Design With
Seated valves. Type WV700 NG 6 ISO up to 25 l/min, up to 700 bar. Features. Applications. Design. Technical data
Seated valves Type WV700 Features Direct operated Leakage free (double tight) High operational safety and reliable switching High duty cycles and long lifetime Applications Control of cylinders and motors
Bieri Hydraulik standard components from 500 up to 1000 bar High pressure hydraulic systems for various applications
Bieri Hydraulik standard components from 500 up to 1000 bar High pressure hydraulic systems for various applications Including the new 500 serie Axial and radial piston pumps, valves, pressure switches,
Type of operation Depending on requirement either one or two dry DC-solenoid,
Features Leakage free High availability 100% duty cycle Porting NG 6 according to DIN 24340 Positive overlap Function and design The seated valves are direct operated. Depending on the desired control
Seated valves 500 bar
Seated valves 500 bar Type WVM-6I Features Solenoid actuated and direct operated Leakage free in every direction (double tight) High operational safety and reliable switching High duty cycles and long
Gear Motors. Series PGM Fixed Displacement Motors, Aluminium Designs
Gear Motors Series PGM Fixed Displacement Motors, Aluminium Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
RA / Internal Gear Pump Model GP2, Series 2X Fixed Displacement. Typical application:
Sizes 6.3 to 16 Internal Gear Pump Model GP2, Series 2X Fixed Displacement up to 576 PSI.397 to.98 in 3 (35 bar) (6.5 to 16 cm 3 ) RA 1 23/6.97 RA 1 23/6.97 Characteristics: Peak pressure of up to 576
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
IPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
RA / Internal Gear Pump Model GP3, Series 3X Fixed Displacement. Typical application:
Sizes 20 to 32 Internal Gear Pump Model GP3, Series 3X Fixed Displacement up to 5076 PSI 1.25 to 1.98 in 3 (350 bar) (20.6 to 32.5 cm 3 ) RA 10 234/07.97 Characteristics: Peak pressure of up to 5.076 PSI
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
IPV catalog High-pressure internal gear pumps
Voith Turbo IPV catalog High-pressure internal gear pumps Benefits that convince Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines worldwide. Sophisticated
RE 91808/ AA4VSE Plug-in dual displacement motor. High pressure range. Series 10 Axial piston swashplate design, SAE model
AA4VSE Plug-in dual displacement motor Series Axial piston swashplate design, SAE model RE 91808/09.90 RE 91808/09.90 Brueninghaus Hydromatik Size 250 Nominal pressure 350 bar Peak pressure 400 bar High
IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet
IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet Function 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial disc Axial
Fixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
5.1 MEDIUM HEAVY DUTY SERIES SIZE 2
.1 MEDIUM HEAVY DUTY SERIES SIZE 2 CONTENTS PGI100 Ordering Code.1.1 Medium Heavy Duty Series Technical Information.1.2 Specifications.1.3 Hydraulic fluids.1.4 Viscosity range.1. Temperature range.1.6
1.3 HIGH PRESSURE SERIES
1.3 HIGH PRESSURE SERIES content Ordering Code 1.3.1 High Pressure Series Technical Information 1.3.2 Specifications 1.3.3 Hydraulic Fluids 1.3.4 Viscosity Range 1.3.5 Temperature Range 1.3.6 Seals 1.3.7
Axial piston variable pump A7VO
Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program
Fixed Displacement Plug-In Motor A2FE
Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96
Feed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
IPV Catalog High-pressure Internal Gear Pumps
IPV Catalog High-pressure Internal Gear Pumps Benefits that convince Features that count Machines that run Internal gear pumps from Voith Turbo H + L Hydraulic are working reliably in hun dreds of thousands
Axial Piston Fixed Displacement Pump KFA
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Axial Piston Fixed Displacement Pump KFA RE 91 501/06.03 1/12
Axial Piston Fixed Pump A17FNO Series 10
Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with
Hydraulic Fixed Piston Rexroth A2FE Motor
Hydraulic Fixed Piston Rexroth A2FE Motor Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement
Brochure Hydraulic Pumps, Hydraulic Parts
www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr
Fixed Displacement Motor A2FM
rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97
4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
Pressure Relief Valve DB12 CE
Pressure Relief Valve DB12 CE up to 120 l/min Connection housings 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC pressure relief valves DB12-CE are valves for oil hydraulic systems to control
Feed Pumps Direct Drive Series 1.1.
1.1. FEED PUMP SERIES FZP AND MFZP 1. GENERAL The feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief
External Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
MOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
Axial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
Axial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
Fixed Displacement Motor AA2FM (A2FM)
Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400
SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
SCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
3.3 VARIABLE DISPLACEMENT MECHANICAL COMPENSATION
. VRIBL ISPLMNT MHNIL OMPNSTION ONTNTS PVV101 Ordering ode..1 Mechanical compensation Technical Information..2 Specifications.. Hydraulic fluids..4 Viscosity range..5 Temperature range..6 Seals..7 Filtration..8
MOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
Axial Piston Fixed Pump A17FNO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A17FNO RE 91510/03.10 1/12 Data sheet eries 10 ize 125 Nominal pressure 250 bar
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES
BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
Axial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
TPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Pumps. Product Overview X.XXX.0/01.09 E /03.13 E /03.13
Pumps Product Overview 1 1. General Information 1.1 Operating Fluid Designation Standard Features Basic chemical composition Recommended seal material HL Improved anti-rust and antioxidant characteristics
Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A600/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,
2-Circuit Axial Piston Fixed Pump A18FDO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice 2-Circuit Axial Piston Fixed Pump A18FDO E 91540/03.10 1/12 eplaces: 06.09 Data sheet eries 10 ize 63,
Axial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
Feed Pumps Direct Drive Series 1.1.
1.1. FEED PUMP SERIES FZP AND MFZP 1. GENERAL The feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief
AP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
SCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
Hydraulic Pump Series F1 Fixed Displacement
Fixed Displacement Catalog 9129 8201-02 August, 1997 GB Content General information 3 Specifications 4 Pump and line selection 5 Ordering code 5 Standard versions 5 Installation dimensions 6 Installation
Variable Displacement Pump A4VG for closed circuits
RE 92 003/05.99 RE 92 003/05.99 replaces: 02.98 Variable Displacement Pump A4VG for closed circuits Sizes 28...250 Series 3 Nominal pressure 400 bar Peak pressure 450 bar A4VG...EP Index Features 1 Ordering
Fixed Displacement Motor A10FM A10FE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Fixed Displacement Motor 10FM 10FE RE 91 172/06.06 1/24 Replaces: 01.03 Technical Data Sheet Size 10...63
Axial Piston Variable Pump A10VO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO RA 92703/11.07 1/44 Replaces: 06.07 Data sheet eries 52/53 ize 10...85
Pressure Compensated Flow Control Valves SRVR/SRVRP
Pressure Compensated Flow Control Valves /P up to 210 bar up to 160 l/min Type 1. DESCRIPTION 1.1. GENERAL flow control valves with check function are, in accordance with DIN-ISO 1219, valves for oil hydraulic
UŽSISAKYKITE internetu telefonu el. paštu
Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to
IGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
Axial piston variable displacement pump type V60N
Axial piston variable displacement pump type V60N For commercial veicles Open circuit Nominal pressure Maximum pressure p max Geometric displacement V max = 350 bar (5075 psi) = 400 bar (5800 psi) = 90
Hydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
Variable double pump AP2D
Variable double pump AP2D RJ B1015E/12.04 1/12 Open Circuit Size 12...36 Series 20 / 30 Axial piston swashplate design Nominal pressure 24.5 / 31.4 1 ) MPa 1 ) size 36 only Contents Features Ordering Code
Gear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs
Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table
THRU DRIVE HYDRAULIC VANE PUMP TQ/TV SERIES
THRU DRIVE HYDRAULIC VANE PUMP TQ/TV SERIES TQ/TV THRU-DRIVE HYDRAULIC VANE PUMPS TQ/TV SERIES Thru-drive pumps save installation space and cost by eliminating double shaft extension electric motors or
Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A60/E Axial piston pumps type PVP variable displacement, by a full line of mechanical controls PVPL4046 PVP are variable displacement axial piston pumps for high pressure operation,
Axial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007
Design 45 Variable Displacement February 2007 Introduction With thru drive for single and multiple pumps Swash plate type for open circuit Technical Features Low noise level Fast response (eg. PV046: upstroke
GMP-Type. Key Features: Integrated Motor-Pump Units
Integrated Motor-Pump Units GMP-Type Key Features: Direct coupling between motor and pump Rotation: Right (viewed from shaft end) Electric motor mounting type: special B3-B14 (IEC 34-7) Rated Voltage:
AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps
Variable Displacement Piston Pumps AR Series Variable Displacement Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa Variable
RV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
Air Cooler Mobile AC-LNH 8-14 with hydraulic motor
ir Cooler Mobile C-LNH 8-1 with hydraulic motor Symbol General The C-LNH air cooler series is designed specifically for mobile hydraulic systems where high performance and efficiency are required and physical
PVD /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE
14 100/117 ED PVD VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with mechanical pressure compensator. The pressure
Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X
Variable Vane Pump, Direct Controlled PV7...A Series 1X / X RE 1 Issue: 1.13 Replaces: 8.8 Sizes 1 to Maximum pressure 1 bar Displacement volume 1 to cm 3 Features Very short control times Low noise Mounting
TECHNICAL UNION
Bent Axis Pump This hydraulic pump is a Bent Axist type pump, with fixed displacement, developed under the design of spherical head pistons. This design is extremely efficient, as well as high performance.
Variable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
Brueninghaus Hydromatik Rexroth A2FO Pump & A2FM Motor
Brueninghaus Hydromatik Rexroth A2FO Pump & A2FM Motor Open and closed circuits Sizes 10...180 Series 6 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar Features Fixed displacement motor A2FM of
External gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
Axial Piston Fixed Motor A2FNM for Fan Drives and Flywheel Mass
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FNM for Fan Drives and Flywheel Mass RE 91007/02.11 1/16 Data sheet Series 61
PLP Pump (up to 16 cm 3 /r max. 120 bar) PHV Pump (up to 32 cm 3 /r max. 250 bar) PVS Pump (up to 100 cm 3 /r max. 100 bar)
General Catalogue MODEL PLP Pump (up to 16 cm 3 /r max. 120 bar) PHV Pump (up to 32 cm 3 /r max. 250 bar) PVS Pump (up to 100 cm 3 /r max. 100 bar) PSP Pump (up to 100 cm 3 /r max. 160 bar) PSPK Pump (up
Hydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
VINCKE HYDRAULIC PUMPS
: VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment
Oil/Air Cooler Units. Standard series EL Type. Test procedure certified following EN 1048
COMPLETE OIL / AIR COOLER SYSTEM WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. Application These high performance coolers with axial fans are suitable for hydraulic cooling applications with both return
Hydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
Truck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
TMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415