district heating
|
|
|
- Sabrina Owens
- 5 years ago
- Views:
Transcription
1 district heating
2 APPLICATION Lauridsen Industri Valve s special expertise covers the entire district heating system from district heating power station or heating plant, through the distribution piping network, to building specific substations. 2
3 The solution for district heating applications included a complete range of ball and butterfly-type shut-off valvs and butterfly-type control valves. Lauridsen Industri valve port folio further includes long stem ball valves designed for underground installation and hottapping and branching valves for expanding ecisting distribution pipingnetworks. 3
4 Anatomy map of fully welded ball valve Welded Ball Valve Material Description Pos Article Material 1 Body Steel ST End piece Steel ST Ball SS304 4 Seat PTFE+C 5 0-ring VITON 6 Disc spring 65Mn 7 Metal pad SS304 8 Sealing gasket PTFE+C 9 Sliding bearing PFTE+SPCB 10 Stem 2Cr13 11 Neck Steel ST Sealing gasket PTFE+C 13 0-ring VITON 14 Gland A Locating pin 2Cr13 16 Handle Galvanized Steel 17 Cap nut Galvanized Steel 4
5 Anatomy map of fully welded ball valve Welded Ball Valve Material Description POS Article Material D Body Steel ST End piece Steel ST Ball SS304 4 Body seat PTFE+C 5 0-ring VITON 6 Disc spring 65Mn 7 Metal pad SS304 8 Sealing gasket PTFE+C 9 Sliding bearing A36+PTFE 10 Stem 2Cr13 11 Neck Steel ST Sealing gasket PTFE+C 13 0-ring VITON 14 Gland A Top flange A Pin Steel ST Worm gear HT
6 A B D Standard fully welded ball valve L Nominal diameter: DN15-DN150 DN A B L D DN DN DN DN DN DN DN DN DN DN DN Standard fully welded ball valvewith turbine A B D E L Nominal diameter: DN200-DN1400 DN A B L D E DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN
7 Fully welded full bore ball valve A D B L Nominal diameter: DN15-DN300 DN A B L D DN DN DN DN DN DN DN DN DN DN DN Fully welded full bore ball valve with turbine A D E B L Nominal diameter: DN200-DN1400 DN A B L D E DN DN DN DN DN DN DN DN DN DN DN DN DN DN
8 Flanged fully welded ball valve D L z-ø C f Nominal diameter: DN15-DN1400 power plants, oil pipelines and other industrial areas of the L z-ø C f D DN L D Φη Z f C DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN
9 Underground fully welded ball valve L H DN L D DN DN DN DN DN DN DN DN DN DN DN DN DN DN Underground fully welded ball valve Nominal diameter: DN20-DN800 DN L D 1 DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN
10 Perforated fully welded ball valve Nominal diameter: DN65-DN150 DN A B L L1 L2 DN DN DN DN DN Fully welded full bore ball valve with turbine Nominal diameter: DN200-DN350 DN A B L L1 L2 DN DN DN DN
11 Screwed fully welded ball valve A RG D B L Nominal diameter: DN15-DN50 DN A B L D RG DN /2 DN /4 DN DN /4 DN /2 DN Screwed fully welded ball valve RG D C B Nominal diameter: DN200-DN350 L1 L2 DN A B L D RG DN /2 DN /4 DN DN /4 DN /2 DN
12 Double seal fully welded butterfly valve with flexible seat Nominal diameter: DN300-DN1400 Suitable temperaure: -29 C-425 C power plants, oil pipelines and other industrial areas of the DN L L1 L2 L3 H1 H2 H3 H4 D S Kv kg DN DN DN DN DN DN DN DN DN DN DN DN
13 Double seal fully welded butterfly valve with flexible seat Nominal diameter: DN300-DN1000 Suitable temperaure: -29 C-425 C power plants, oil pipelines and other industrial areas of the DN L L1 L2 L3 H1 H2 H3 H4 D D3 reiat kv kg DN DN DN DN DN DN DN DN DN
14 Technique note for fully welded ball valve: In the past 23 years, with our continuously innovation and improve on quality. Lauridsen Industri fully welded ball valve has been widely applied in underground heat supply Lauridsen Industri also won trust and good reputation of customers all over the world. Fully welded structure of Lauridsen Industri valve improved the sealing ability, lowered the machine weight, making the installation flexible and reducing the cost and time of manufacturing. Deep underground structure is convenient for operations to operate valve with T-type hand lever without going to the underground control room and avoids the potential risk. Lauridsen Industri underground ball valve designs different valve height according to customer gas pipeline length. Various port connection forms are designed for customer s needs. Lauridsen Industri fully welded ball valve including standard bore and full bore for your choice. JB9092 Valve size NPS Test Pressure Test time Sce DN50 1:5times the 100* F 15. min DN65-DN200 Rating of ANSI Class 60. min DN250 Max. Operating Pressure 180. min 100F JB9092 Valve size NPS Test Pressure Test time. Sce DN50 1:1times the 100*F 15. min DN65-DN200 Rating of ANSI Class 60. min DN250 Max. Operating Pressure 120. min 0,6Mpa Hydrostatic Seal Test The pressure should be 1.1 times more than working pressure by seal hydrostatic test. Air Seal Test Air seal leakage test is based on 80PSIG (6kgf/cm ) ninactiue gasor full filled with air, after close the valve, then check it is leakage or not by one side of the valve. 14
15 Note for fully welded ball valve installation 1. The valve shall be completely open when welded into horizontal piping. 3. When welding the valve into vertical piping. The valve shall be open when the upper seam is welded. 2. If the valve is closed when the upper seam is welded, it must be filled with water. 4. In gas welding the valve shall be closed when welding the bottom seam. 1. Remove the caps of both sides to check port. Clean the dirt to avoid damaging of valve seat sealing face. 2. To check the operation of ball valve by opening and closing the valve. 3. Wipe the pipe welding surface before installing to the You shouldn t consider the direction of installation (each can be installed to the upper side) 4. To open the valve to avoid welding slag during the welding. 5. After the welding, open and close valve until it cools down completely. 6. When installing worm gear actuator (size above DN 200 or special customized) to make actuator arrow coincide with valve switch arrow according to valve location and arrow direction. Joint the actuator and standard flange and adjust bolt to assure the completely shut and open of valves (open the button cap, loose the fixed nuts, adjust the bolt with a hexagonal wrench, then tighten the nuts and cover the cap ) referring the direction of arrow (arrow should be completely horizontal or vertical) 15
16 Forhandler: 23 years of experience More than valve + actuator different combinations Own engineering department og testing department (cycle and torque measuring; temperature testing) Own workshop (direct mounting or mounting according to EN 15081; limit switches setting Each actuated valve is tested before shipment Tracking number for each actuated valve ISO 9001: 2008 and ATEX certifications Produktion: Rosendahls a/s Lauridsen Industri Snedkervej 17, 6710 Esbjerg V Denmark T: M: F: E: info@danskventil.dk
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
LONG STEM BALL VALVE of carbon steel with welded ends series
with welded ends 38000 series C ont R o L Description Edition 05-07-2016 Ball valve series 38000 tested according to the EN488 standard and fulfill the requirements of this standard. Tight on-off valve
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 20-02-2015 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
Ref PTFE WAFER BUTTERFLY VALVE. Model/Ref:
Model/Ref: 1155 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and ISO PN20 ANSI150-25 C + 200 C Max Pressure : 16 Bars up to DN150
Ref Model/Ref: METAL/METAL WAFER BUTTERFLY VALVE ( NO TIGHTNESS )
Model/Ref: 1111-1112 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to 1400 mm Between flanges PN10/16 and ISO PN20 ANSI150-20 C for carbon steel and -30 C for S.S. type
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
Installation Operation Maintenance
Installation Operation Maintenance www.challengervalves.com.au 1 QAD#IM1015 REVC 3.10.15 Index 1. INTRODUCTION 3 1.1 Design Features 1.2 Flange and Pipe Compatibility 3 1.3 Operating Pressures and Temperatures
BUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
KLINGER Monoball One-Piece ball valves
KLINGER Monoball One-Piece ball valves Edition 02 KLINGER Monoball Fully welded end ball valves High demands Pre-insulated pipeline systems as used e..g. in district heating and waste water networks, are
Double Offset High Performance Butterfly Valve
Double Offset High Performance Butterfly Valve INSTALLATION OPERATION MAINTENANCE APOLLO INTERNATIONAL HIGH PERFORMANCE BFV IOM - Page 2 of 20 TABLE OF CONTENTS INTRODUCTION 3 PRODUCT STORAGE 3 PRODUCT
Two-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:
FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in
2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C
R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition
with welded / threaded / flanges ends C ont R o L Description Ball valve 440-445 series used for on/off services a wide range of applications in the chemical and process industries. It is used for oil,
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
EXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
Prem Chem Butterfly Valves
10 butterfly Valves Prem Chem Butterfly Valves butterfly Valves 11 Design standards: gb12238, API609, MSS SP-67, MSS SP-68 Butterfly valves have become very popular because of compactness, weight and ease
Two-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
IOM Manual. IOM Manual. Series 76/77.
IOM Manual IOM Manual Series 76/77 www.flowlinevalves.com Flow Line Valve and Controls, L.L.C. 110 Main Project Road Schriever, LA 70395 P.O. Box 677 Schriever, LA 70395 Phone 985-414-6004 * Toll Free
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric
Installation, Operation and Maintenance Manual for the HE Series
Installation, Operation and Maintenance Manual for the HE Series High Performance Butterfly Valve "Double Offset" CONTENT IOM-HP-100614-1 1. INTRODUCTION 1.1 GENERAL NOTE 1.2 STRUCTURE & TYPE 1.3 OPERATION
502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref:
Model/Ref: 270090022000 www.lauridsenindustri.com CHARACTERISTICS The 502+UM1.5 is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons,
BUTTERFLY VALVE POWER-PACK CONTROLLED BUTTERFLY VALVE
BEI JI NG JOI NTFLOW SYSTEM CO. BUTTERFLYVALVE Power-pack Controlled Butterfly Valve is a kind of tailor-made products, as it can be different combination with butterfly valve and control system. The basic
Two-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
BALL VALVE DOUBLE BLOCK & BLEED design RSD BB type TRUNNION MOUNTED, ANTISTATIC,FIRE SAFE DESIGN API607,API6FA
BALL VALVE DOUBLE BLOCK & BLEED design RSD BB type TRUNNION MOUNTED, ANTISTATIC,FIRE SAFE DESIGN API607,API6FA APPLICATIONS Designed and executed for use in pipeline systems, which convey fluids under
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
Ref FIRE SAFE BALL VALVE ISO PN16/40 FLANGED. Model/Ref:
Ref. 753-753 Model/Ref: 752-753 www.lauridsenindustri.com Ref. 752-753 Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ISO PN16/40 Flanges -50 C in SS and -20 C in carbon steel + 250
FULL BORE BALL VALVE of carbon steel with welded ends / flanges and series
FULL BORE BALL VALVE with welded ends / flanges 32000 and 32500 series C ont R o L Description Edition Ball valves series 32000 32500 are a tight on-off valves and suitable for liquid pipe systems. Such
Materials : Cast iron
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanges ISO PN16-10 C + 300 C Max Pressure : 16 Bars Specifications : Rising rotating stem and handwhell Bolted bonnet and gland packing
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
PRODUCE EVOLUTION. Be careful, our valves Ref are changing
ATEX DIN M3 PRODUCE EVOLUTION Be careful, our valves Ref.704-706 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new
FRP Ball Valves INSTALLATION & MAINTENANCE MANUAL
FRP Ball Valves INSTALLATION & MAINTENANCE MANUAL FRP BALL VALVES TABLE OF CONTENTS MAINTENANCE AND INSTALLATION INSTRUCTIONS 1. 2. 2.1 2.2 2.3 2.4 GENERAL...Page 1 HANDLING...1 Receiving and Storing...1
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Materials : Ductile iron EN GJS body, PTFE seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and Class 150 (PN20) - 25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
Konrad. Quality. Out of tradition & conviction. Armaturentechnik WATER ENERGY OIL & GAS STEEL CHEMICAL INDUSTRY
WATER ENERGY OIL & GAS STEEL CHEMICAL INDUSTRY Made in The Company Product >> Products from the early days of Alfred Maschinenfabrik >> Sectional drawing of one of the initial EXENTROMAT units CEO: Dipl.-Ing.
2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 220 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges ISO PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200
Materials : Ductile iron EN GJS 500-7, PTFE seat
Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug
HIGH PERFORMANCE BUTTERFLY VALVE
Figure HPA BUTTERFLY VALVES Features: Bi-directional Bubble-tight Shutoff Suitable for Saturated Steam Service to 150 PSI Angled Disc Available in Wafer (3 to 12 ) or Lug (3 to 24 ) Stocked in Carbon by
LUG BUTTERFLY VALVE PN10/16
LUG BUTTERFLY VALVE PN10/16 Model/Ref: 1133 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges ISO PN10/16-10 C + 110 C ( 130 C C temporarily) Max
KTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
Materials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 300 mm Between flanges PN10/16 and ISO PN20 ANSI150-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Long neck for isolation Wafer
HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
Broen Valves and Possibilities of Their Usage. Brzece,
Broen Valves and Possibilities of Their Usage. Brzece, 28.05.2015 BROEN BALLOMAX District Heating & Gas Andrzej Gonczar Export Director BROEN S.A. Pieszycka 10, 58-200 Dzierżoniów Poland www.broen.pl 2
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck length according HeizAnlV. External
Engineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
Installation, Operation And Maintenance Manual. Manual. For the 400 Series. ABZolute Seal. High Performance Butterfly Valve "Double Offset"
Installation, Operation And Maintenance Manual Manual For the 400 Series ABZolute Seal High Performance Butterfly Valve "Double Offset" ABZ VALVE & CONTROLS CONTENT 1. INTRODUCTION 1.1 GENERAL NOTE 1.2
Sempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
VALVES WITH NA ELECTRIC ACTUATOR
505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
LOW PRESSURE BALANCED VALVE DIAPHRAGM BALANCED
DIAPHRAGM BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to
VALVE WITH UV ELECTRIC ACTUATOR
762-763 VALVE WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 762-763+UV ball valve is dedicated to the automatic opening/shut-off of pipes carrying medium pressure unloaded industrial fluids. This full
BUTTERFLY VALVE WITH WELDED ENDS INSTALLATION AND MAINTENANCE MANUAL
BUTTERFLY VALVE 31300 SERIES INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE 1. Overview Read these instructions carefully before starting the valve installation and start-up work. Safe keep the instructions
Dura Water Wafer Butterfly Valve
Dura Water Wafer Butterfly Valve Specifications Recommended use Features Working Pressure The Dura butterfly valve is a soft sealing valve for installation with flanges drilled in accordance with AS 2129
VALVES WITH UV ELECTRIC ACTUATOR
505-507 VALVES WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 505+UV and 507+UV cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
VALVE WITH UV ACTUATOR
CHARACTERISTICS The 3-way stainless steel 783-5+AP (L-port) and 784-6 +AP (T-port) ball valves are dedicated to the mixing, diverting or automatic discharging of industrial unloaded fluids. The valves
ARI-ZESA / ARI-GESA / THEA Butterfly valves
ARI-ZESA - Fig. 012 - Free of maintenance butterfly valve with elongated eyelets - soft sealed ARI-GESA - Fig. 013 - Free of maintenance butterfly valve with threaded eyelets - soft sealed / THEA Butterfly
Installation, Operation, and Maintenance Manual
Industrial Process Installation, Operation, and Maintenance Manual Series PBFV Plastic Lined Butterfly Valve - Lug and Wafer Style Table of Contents Table of Contents Introduction and Safety...2 Safety
Materials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2 to 16 ) Flanges R.F. Class 300 (PN50) - 29 C + 425 C Max Pressure : 50 Bars Specifications : Swing check valve Bolted bonnet Vertical
Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
Size : Ends : Min Temperature : Max Temperature : Materials : Carbon steel ou Stainless Steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP, Socket or Butt Welding -30 C in S.S.and -20 C in carbon steel + 220 C Max Pressure : 63 Bars up to DN50, 40 Bars over Specifications
INSTALLATION & MAINTENANCE MANUAL SERIES 90SV/93V SEGMENTED V FLOW VALVES
BRIEF INTRODUCTION The Segmented V Flow valve is an advanced quarter-turn control valve which can be used switch on and off and proportionally adjusted. The ball core is designed with a special V type
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
Materials : Stainless Steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP, NPT, Socket or But Welding -20 C + 180 C Max Pressure : 63 Bars up to DN50 ( 40 bars over ) Specifications : ISO 5211 mounting
Butterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to 100 mm Flanges R.F. PN40-20 C + 220 C Max Pressure : 40 Bars Specifications : ISO 5211 mounting pad PTFE filled with stainless
BR 14b / BR 14c Application:
High - Performance Butterfly valve BR 14b / BR 14c Application: Tight-closing, double-eccentric butterfl y control valve especially for the chemical industry where aggressive media s are used, for example
PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing
PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking
Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range
ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
Materials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 130 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
XS VALVE WITH SA05 / SA-X05 ELECTRIC ACTUATOR. Model/Ref:
736-746XS VALVE WITH SA05 / SA-X05 ELECTRIC ACTUATOR Model/Ref: 272500023000 www.lauridsenindustri.com CHARACTERISTICS The 736XS (steel) and 746XS (stainless steel) + SA05 2-way ball valves are dedicated
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Page 6. Page 6. Page 6. Page 7. Page 8. Page 9. Page 10 / 11
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
Sempell High Pressure Stop Valves Model VA500 (ASME)
7 Sempell High Pressure Stop Valves Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
DN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4 to 4 Threaded BSP or NPT - 20 C + 180 C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore Materials
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class
NAF-Setball ball sector valves DN 25-400, PN 10-40, ANSI Class 150-300 Fk 41.51(12)GB 4.98 Replaces Fk 41.51(1GB 12.97 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
Size : Ends : Min Temperature : Max Temperature : Materials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
High Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6