NLS and NLT, method A, completely supported in prepared pit (welding)

Transcription

1 NS and NT, method A, completely supported in prepared pit (welding) 80 x 80 x 8 mm by others x x 40 mm by others flexible conduit Ø 50 mm for cables. model W () NS 0 7, NS 5 7, NS 0 7, NS 4 7, NS NS / NT NS / NT NS / NT NS NS / NT NS / NT NS / NT Edition : september 005

2 NS and NT, method, suspended with recessed angle (welding) x 0 80 x 80 x 8 40 x x 40 mm by others flexible conduit Ø 50 mm for cables. incline cm/m model W () NS 0 7, NS 5 7, NS 0 7, NS 4 7, NS NS / NT NS / NT NS / NT NS NS / NT NS / NT NS / NT Edition : september 005

3 NS and NT, method C, suspended with finishing of liquid concrete Prefabricated pit: Upperside edge - 00 mm below finished floor for lers type NS and NT chassis flexible conduit Ø 50 mm for cables model W () NS 0 7, NS 5 7, NS 0 7, NS 4 7, NS NS / NT NS / NT NS / NT NS NS / NT NS / NT NS / NT incline cm/m finished floor Steel strips (not supplied) have to be welded to the steel pins (by contractor) concrete chassis finished floor Edition : september 005

4 NS and NT, method D, with letter-box model W () NS 0 7, NS 5 7, NS 0 7, NS 4 7, NS NS / NT NS / NT NS / NT NS NS / NT NS / NT NS / NT Concrete floor plate elements with cut out ø60 mm for wiring (others) 60 0 injection channel Prefabricated concrete T-shaped elements, prepared for attachement of the rubber bumpers. Wall: prefabricated concrete or brickwork flexible conduit Ø 50 mm for cables (by others). threaded end eveller deck Note : Floor reinforcement must be attached to the ler at several spots. finished floor Edition : september 005

5 NS and NT, method D, with letter-box model W () NS 0 7, NS 5 7, NS 0 7, Chassis NS 4 7, NS NS / NT NS / NT NS / NT NS FF 50 - t.o.v.pei 50 mm 60 0 NS / NT NS / NT NS / NT Prefabricated pit: Upperside harsh concrete floor = max. finished floor - 00 mm. flexible conduit Ø 50 mm for cables. Steel reinforcement for the floor shuttering on the front face Threaded bushes For attachement of the bumpers (by others) Note Floor reinforcement must be attached to the ler at several points. eveller deck Edition : september 005

6 NS and NT "box-model", method E, without letter-box The net distance between the floor reinforcement should be as indicated below : type ler W () NS 0 7, NS 5 7, NS 0 7, NS 4 7, NS NS / NT NS / NT NS / NT NS NS / NT NS / NT NS / NT First cast floor to support the ler ler FF mm for NS and NT with liplength = 500 mm FF mm for NT with liplength = 000 mm FF = finished floor eveller deck Flexible conduit Ø 50 mm for cables. Steel reinforcement for the floor Connection flexible conduit Threaded bushes M6x00 for attachement of the bumpers Shuttering on the front face Note Floor reinforcement must be attached to the ler at several points. Edition : september 005

7 NS and NT "box-model", method E, with letter-box The net distance between the floor reinforcement should be as indicated below : model W () NS 0 7, NS 5 7, NS 0 7, NS 4 7, NS NS / NT NS / NT NS / NT NS NS / NT NS / NT NS / NT First cast floor to support the ler incline cm/m FF mm for NS and NT with liplength = 500 mm FF mm for NT with liplength = 000 mm FF = finished floor Finished Floor evel Shuttering platform : - stable - to be removed after casting the floor by contractor. eveller deck box-ler a a Flexible conduit Ø 50 mm for cables. Steel reinforcement for the floor Connection flexible conduit Threaded bushes M6x00 for attachement of the bumpers Note Floor reinforcement must be attached to the ler at several points. Shuttering on the front face Edition : september 005