DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55116
|
|
- Thomasine Chapman
- 5 years ago
- Views:
Transcription
1 Specification Details: Specification: MIL-DTL Title: Connectors: Miniature Audio, Five Pin and Six Pin Federal Supply Class (FSC): 5935 Conventional: Yes Specification contains quality assurance program: No MIL-STD-790 Established Reliability & High Reliability: No MIL-STD-690 Failure Rate Sampling Plans & Procedures: No Weibull Graded: No Specification contains space level reliability requirements: No Specification allows test optimization: No Contact Information: DLA Land and Maritime - VQ Office of Primary Involvement: Passive Devices Branch, DLA Land and Maritime - VQP Primary Qualifying Activity Contact: , vqp.jbc@dla.mil Secondary Qualifying Activity Contact: , vqp.cr@dla.mil Notes: N/A Part Configuration: M55116/01-5 Specification Number Specification Sheet Cable Size M55116 /01-5 Date: 10/26/2016 Manufacturer Designation: ( ) Manufacturer Designation: M55116/1-( ) Manufacturer Designation: M55116/1-( ) Manufacturer Designation: AP Manufacturer Designation: MIL-DTL-55116/1Y Manufacturer Designation: ( )
2 Manufacturer Designation: AP Manufacturer Designation: MIL-DTL-55116/2Y Manufacturer Designation: S-( ) Manufacturer Designation: M55116/3-( ) Manufacturer Designation: M55116/3-( ) Manufacturer Designation: AP Manufacturer Designation: MIL-DTL-55116/4Y Manufacturer Designation: M55116/2-( ) Manufacturer Designation: M55116/2-( ) Manufacturer Designation: AP Manufacturer Designation: MIL-DTL-55116/3Y Manufacturer Designation: S-( ) Manufacturer Designation: M55116/4-( ) Manufacturer Designation: M55116/4-( )
3 Manufacturer Designation: ( ) Manufacturer Designation: M55116/5-( ) Manufacturer Designation: M55116/5-( ) Manufacturer Designation: AP Manufacturer Designation: MIL-DTL-55116/6Y, 4, Manufacturer Designation: S-( ) Manufacturer Designation: M55116/7-( ) Manufacturer Designation: M55116/7-( ) Manufacturer Designation: AP Manufacturer Designation: MIL-DTL-55116/8Y, 4, Manufacturer Designation: ( ) Manufacturer Designation: MIL-DTL-55116/9Y Manufacturer Designation: AP Manufacturer Designation: MIL-DTL-55116/5Y, 4, Manufacturer Designation: ( ) Manufacturer Designation: M55116/6-( ) Manufacturer Designation: M55116/6-( ) Manufacturer Designation: AP Manufacturer Designation: MIL-DTL-55116/7Y, 4, Manufacturer Designation: S-( ) Manufacturer Designation: M55116/8-( ) Manufacturer Designation: M55116/8-( ) Manufacturer Designation: AJ Manufacturer Designation: M55116/
4 Manufacturer Designation: ( ) Manufacturer Designation: MIL-DTL-55116/10Y Manufacturer Designation: ( ) Manufacturer Designation: MIL-DTL-55116/11Y Manufacturer Designation: ( ) Manufacturer Designation: MIL-DTL-55116/12Y Manufacturer Designation: S-( ) Manufacturer Designation: MIL-DTL-55116/13Y Manufacturer Designation: S-( ) Manufacturer Designation: MIL-DTL-55116/14Y Manufacturer Designation: AJ Manufacturer Designation: M55116/ Manufacturer Designation: AJ Manufacturer Designation: M55116/11-( ) Manufacturer Designation: AJ Manufacturer Designation: M55116/12-( ) Manufacturer Designation: AJ Manufacturer Designation: M55116/13-( ) Manufacturer Designation: AJ Manufacturer Designation: M55116/14-( )
5 Manufacturer and Supplier Location Information Manufacturer: (CAGE Code: SF116) Location: Plot No. 105, Bhosari Industrial Area, Pune, , India Manufacturer: (CAGE Code: 28986) Location: 50 Sunnyside Avenue, Stamford, CT 06904, US Manufacturer: Cooper Crouse-Hinds, LLC WPI Salem Division (Eaton) (CAGE Code: 25330) Location: 750 West Ventura Blvd, Camarillo, CA 93010, US 2. Calzada Industrial Nuevo Nogales 424 Nogales 84094, MEXICO Manufacturer: Glenair, Inc. (CAGE Code: 06324) Location: 1211 Air Way, Glendale, CA 91201, US Manufacturer: (CAGE Code: 0CS66) Location: 140 Wilbur Place, Bohemia, NY , US -5-
DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55116
Specification Details: Specification: MIL-DTL-55116 Title: Connectors: Miniature Audio, Five Pin and Six Pin Federal Supply Class (FSC): 5935 Conventional: Yes Specification contains quality assurance
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-28876
Specification Details: DLA Land and Maritime - VQ Specification: MIL-PRF-28876 Title: Connectors, Fiber Optic, Circular, Plug and Receptacle Style, Multiple Removable, Termini Federal Supply Class (FSC):
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-23419
Specification Details: Specification: MIL-PRF-23419 Title: Fuse, Cartridge, Instrument Type Federal Supply Class (FSC): 5920 Conventional: No Specification contains quality assurance program: No MIL-STD-790
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-19207
Specification Details: DLA Land and Maritime - VQ Specification: MIL-PRF-19207 Title: Fuseholders, Extractor Post Type, Blown Fuse Indicating and Nonindicating Federal Supply Class (FSC): 5920 Conventional:
More informationMS17340 N 12 A 1 FINISH AN EXAMPLE OF THE GOVERNMENT DESIGNATION WHICH IDENTIFIES THE COVER OR RECEPTACLE IS SHOWN B MS17343 C 20 FINISH SIZE -1-
QUALIFICATIONS VALIDATED EVERY 24 MONTHS 19-Jul-99 SUPERSEDING QPL-22992-40 31-Mar-98 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATI MIL-C-22992 CONNECTOR, PLUGS AND RECEPTACLES,
More informationP and P Receptacle PCB Hole Patterns
Series 79 790-028P and 790-043P 790-028P and 790-043P This section contains printed circuit board footprints for vertical mounted Series 79 receptacles. The contact identification numbers are shown for
More informationWEIGHT / COST-SAVING Dummy Contact Sealing Plugs (DCSP) For reliable sealing of unused contact cavities without the use of electrical contacts
Sealing Plugs (DCSP) For reliable sealing of unused contact cavities without the use of electrical contacts The use of color-coded M27488 type plastic sealing plugs in unused contact cavities is a requirement
More informationPCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
More informationSUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 50151 QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING QPL-50151-18 6 May 2014 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS
More informationPRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD AS50151
SUPPLEMENTAL INFORMATION SHEET FOR QPL 50151 S HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING QPL-50151-25 22 June 2017 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF PRODUCTS
More informationANNUALLY 12 September 1997 SUPERSEDING QPL-234l May 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION.
QUALIFICATIONS VALIDATED QPL-234l9-39 ANNUALLY 12 September 1997 SUPERSEDING QPL-234l9-38 5 May 1997 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-F-234l9 FUSE, CARTRIDGE,
More informationDETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II
INCH-POUND 08 December 2009 DETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II This specification is approved for use
More informationDEPARTMENT OF DEFENSE INTERFACE STANDARD
INCH-POUND MIL-STD-1560C 23 January 2017 SUPERSEDING MIL-STD-1560C 11 February 2015 DEPARTMENT OF DEFENSE INTERFACE STANDARD INSERT ARRANGEMENTS FOR MIL-DTL-38999, MIL-DTL-27599, AND SAE-AS29600 SERIES
More informationThe activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY TWO YEARS 10-Sep-03 SUPERSEDING QPL-23419-43 24-Aug-01 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFI MIL-PRF-23419 FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL
More informationDEFENSE LOGISTICS AGENCY LAND AND MARITIME P.O. BOX 3990 COLUMBUS, OH
DEFENSE LOGISTICS AGENCY LAND AND MARITIME P.O. BOX 3990 COLUMBUS, OH 43218-3990 July 26, 2018 MEMORANDUM FOR MILITARY/INDUSTRY DISTRIBUTION SUBJECT: Initial draft of MIL-STD-1560 w/change 2 (see table
More informationANNUALLY 29 May 1996 SUPERSEDING QPL October 1995 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-83503
QUALIFICATIONS VALIDATED ANNUALLY 29 May 1996 SUPERSEDING QPL-83503-30 3 October 1995 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-83503 CONNECTOR, ELECTRICAL, FLAT
More informationMINIATURE MIL-DTL TYPE AUDIO FREQUENCY CONNECTORS
SERIES 151 MINIATURE MIL-DTL-55116 TYPE AUDIO FREQUENCY CONNECTORS FEBRUARY 2012 SERIES 151 MINIATURE MIL-DTL-55116 TYPE AUDIO FREQUENCY CONNECTORS HIGH RELIABILITY PERFORMANCE FOR MISSION-CRITICAL COMMUNICATION
More informationThe activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY TWO YEARS 25-May-04 SUPERSEDING QPL-19207-44 18-Mar-03 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFI MIL-PRF-19207 FUSEHOLDERS, EXTRACTOR POST TYPE BLOWN FUSE
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/24H 8 June 2018 SUPERSEDING MIL-DTL-24308/24H w/amendment 4 8 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL,
More informationDETAIL SPECIFICATION SHEET
METRIC MIL-DTL-38999/31E 12 March 2014 SUPERSEDING MIL-DTL-38999/31D 19 April 2002 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, PLUG, LANYARD RELEASE, FAIL-SAFE, REMOVABLE CRIMP
More informationCOMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02
METRIC A-A-59584C 15 September 2008 SUPERSEDING A-A-59584B 23 September 2003 COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02 The General Services
More informationDETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R
INCH-POUND MS24266P 7 August 2015 SUPERSEDING MS24266N 20 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R Inactive for new design after 14
More informationCOMMERCIAL ITEM DESCRIPTION PINTLE ASSEMBLY, TOWING, MANUAL RELEASE, , AND LBS CAPACITY
[INCH-POUND] July 30, 1996 SUPERSEDING (see 7.5) COMMERCIAL ITEM DESCRIPTION PINTLE ASSEMBLY, TOWING, MANUAL RELEASE, 18 000, 40 000 AND 100 000 LBS CAPACITY The General Services Administration has authorized
More informationCOMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03
METRIC A-A-59585C 15 September 2008 SUPERSEDING A-A-59585B 23 September 2003 COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03 The General Services
More informationDETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
INCH-POUND MIL-DTL-23053/1C 17 June 1996 SUPERSEDING MIL-I-23053/1B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
More informationDETAIL SPECIFICATION SHEET SWITCHES, ROTARY, SNAP ACTION CLASS 1SR BASE MOUNTED, SIDE CONNECTED
INCH-POUND 6 February 2006 SUPERSEDING MIL-S-15291/3A(SH) 22 July 1991 DETAIL SPECIFICATION SHEET SWITCHES, ROTARY, SNAP ACTION CLASS 1SR BASE MOUNTED, SIDE CONNECTED This specification is approved for
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL
More information45 YEARS OF EXPERIENCE
ENGINE CONNECTORS 45 YEARS OF EXPERIENCE High Performance Connectors for Critical Environment Temperature Up to 350ºC / 662ºF Vibrations Fire Corrosion 45 YEARS OF EXPERIENCE OLD PRODUCTS DBA 3x NEW GENERATION
More informationQUALIFICATION TEST SUMMARY REPORT ESR Qualification Type Testing of Amphenol Corporation s 2M801 Series Connector
Page 1 of 13 QUALIFICATION TEST SUMMARY REPORT ESR-9389 Qualification Type Testing of Amphenol Corporation s Connector PREPARED BY: Patrick Cole Design Engineer AMPHENOL CORPORATION Aerospace Operation
More informationInstruction Manual. for 14-V DC Option Kits Part No and Part No For Use With Hobart Series 7003B Jet-Ex 4 Diesel Generator Sets
TO-212 121890 Instruction Manual for 14-V DC Option Kits Part No. 282565-1 and Part No. 282565-2 For Use With Hobart Series 7003B Jet-Ex 4 Diesel Generator Sets HOBART BROTHERS COMPANY Airport Systems
More informationDEFENSE AND AEROSPACE GUIDE
DEFENSE AND AEROSPACE GUIDE WWW.THERMISTOR.COM ABOUT QTI QTI is a privately-held manufacturer of temperature sensors and assemblies. Founded in 977, we have grown to be the trusted supplier of temperature
More informationFR ITS RJ45-1 W PHM F6
CODE SCALE SERIES SHEET WEIGHT CODE SCALE SERIES DESCRIPTION SHEET.2x45 R.2 Max. Max. specific indicationweight DATE File:RECEPTACLE_FEMM--PCB_3 - Copia DESCRIPTION.2x45 R.2 Max. Max. DATE File:RECEPTACLE_FEMM--PCB_3
More informationKNOCKOUTS Cat. # Bracket Plastic Clamp Conduit Cable Unit Qty. Wt. Lbs. Per 100 TP100 TP104 TP106 TP114
1" DEEP - NON-GANGABLE - 6.5 CUBIC INCH CAPACITY 1 15 /16" WIDE x 3 3 /4" LONG TP101 TP103 Cat. # Bracket Plastic Clamp Conduit Cable Unit Qty. Wt. Lbs. Per 100 TP101 "S" No 1 1 /2" 2 25 38 TP103 "S" Yes
More informationMILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL
INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used
More informationDETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 3 December 2012 SUPERSEDING 30 September 2011 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department of
More informationDepartment of Defense Standardization Program ASSIST UPDATE
Department of Defense Standardization Program (A bi-monthly summary of changes to the ASSIST document database) 1 January 2010 (For the Period 15 December 2009 to 31 December 2009) Documents listed in
More informationDETAIL SPECIFICATION SHEET TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL. Inactive for new design after 28 September 1993.
INCH-POUND MS500040K 17 November 2011 SUPERSEDING MS500040J 1 March 1991 DETAIL SPECIFICATION SHEET TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL Inactive for new design after 28 September 1993.
More informationCOMMERCIAL ITEM DESCRIPTION DRY CLEANING AND DEGREASING SOLVENT, PD680
NOT MEASUREMENT SENSITIVE 27 September 00 COMMERCIAL ITEM DESCRIPTION DRY CLEANING AND DEGREASING SOLVENT, PD680 The General Services Administration has authorized the use of this commercial item description
More informationDETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R
INCH-POUND MS24266R 1 December 2016 SUPERSEDING MS24266P 7 August 2015 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R Inactive for new design after
More informationDETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 30 September 2011 SUPERSEDING MS51844D 19 April 2007 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department
More informationSteel Outlet Boxes 4 11 /16" Welded
Steel Outlet Boxes 4 11 /16" Welded Steel Outlet Boxes Features & Benefits Ideal for exposed work applications, providing an easy method for the installation of electrical devices (switches, receptacles,
More informationC308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications
Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications
More informationSpace Products. A subsidiary of Data Device Corporation
Space Products A subsidiary of Data Device Corporation QUALIFICATIONS AND CERTIFICATIONS Beta has manufactured space-qualified standard and custom products for over 15 years. This experience includes being
More informationSeries IPT (26482 Type) Bayonet Coupler
IPT330 eedthrough with Jack-to-Jack RJ45 Sample Part Number IPT330 02PP G 18 5E 1 7 RJ45 Category 2 IPT330 Material/inish 02PP = ront Panel Mount Square lange receptacle G = Insert grounded to shell; Omit
More informationDETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
INCH-POUND 17 June 1996 SUPERSEDING MIL-I-23053/11B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED This specification
More informationDETAIL SPECIFICATION SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES
INCH-POUND MIL-DTL-83731/1B July 010 SUPERSEDING MIL-S-83731/1A 0 March 1987 DETAIL SPECIFICATI SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES Inactive for
More informationQUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-DTL FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 F MAXIMUM
QUALIFICATION CERTIFIED SEPTEMBER 2000 22 July 2002 SUPERSEDING QPL-18240-32 15 November 2001 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-DTL-18240 FASTENER ELEMENT,
More informationDETAIL SPECIFICATION SHEET DISK, VALVE. Inactive for new design after 15 October 1998.
INCH-POUND MS29521H 23 September 2015 SUPERSEDING MS29521G 7 April 2009 DETAIL SPECIFICATION SHEET DISK, VALVE Inactive for new design after 15 October 1998. This specification is approved for use by all
More informationaccess references POWERED DAVIT CARRIAGES (supplied & installed by others) Primary & secondary suspension lines connect to powered platfrom
POWERED DAVIT CARRIAGES ref.: M 4765 date: 10/98 D2C-type Powered Davit Carriages Los Angeles Convention Center 1201 South Figueroa Street Los Angeles, CA - ref.: 9636 George Hyman Construction Company
More information1459 Bessemer Dr, El Paso, TX 79936
Company Name SISD Vendor Number Company Contact Address, City, State, Zip Phone: Fax: Email: Web Page Deviations Warranty Period Return Policy Delivery FREIGHT: The district requests that all deliveries
More informationCOMMERCIAL ITEM DESCRIPTION HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY
[INCH-POUND] A-A-59613 August 16, 2001 SUPERSEDING ZZ-H-521F May 28, 1993 COMMERCIAL ITEM DESCRIPTION HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY The General Services Administration has authorized the
More informationNEW JERSEY. YEAR OF MANUFACTURE LICENSE PLATE USE: Registration or display not allowed.
Nebraska Department of Motor Vehicles Driver and Vehicle Records Division 301 Centennial Mall South P.O. Box 94789 Lincoln, NE 68509-4789 402-471-3918 http://www.dmv.state.ne.us/ dvrweb@dmv.ne.gov NEBRASKA
More informationDETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
INCH-POUND MIL-DTL-23053/5C 17 June 1996 SUPERSEDING MIL-I-23053/5B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED This specification
More informationAll Dealer Principals, General Managers, Service Managers, and Parts Managers
April 19, 2016 To: Subject: All Dealer Principals, General Managers, Service Managers, and Parts Managers Warranty Enhancement Program - ZLG Certain 2006 2007 GS 430, 2007 2011 GS 450h, 2008 2011 GS 460,
More informationThe cover screws and all other external metal parts are made of stainless steel (AISI 316L). International approvals
E X - J U N C T I O N B O X Plastic version for Zone 1,, 1 and The robust junction boxes made of plastic and light alloy are featured by their simple mounting and installation capability and their design.
More informationSection L MIL-DTL Micro-D Connectors
Section MI-DT-353 Micro-D Connectors Micro-D MI-DT-353 product selection guide Glenair s Complete Micro-D Product ine includes all M353 Micro-D connectors. Choose Solder Cup, Pre-Wired or PCB versions.
More informationSeries 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
More informationTitle: INSTRUCTION MANUAL HIGH INTENSITY RUNWAY LIGHT/QUARTZ (HRLQ) FAA L-862. DOCUMENT 8922 August 28, 2012 Revision S
Cooper Industries Crouse-Hinds Division Crouse-Hinds Airport Lighting Products 1200 Kennedy Road Windsor, CT 06095 860 683-4300 Fax 860 683-4354 DOCUMENT 8922 August 28, 2012 Title: INSTRUCTION MANUAL
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationEX-REPAIR AND MAINTENANCE RECEPTACLES
EX-REPAIR AND MAINTENANCE RECEPTACLES A 3 A plugs and receptacles plastic version for zones, 2, 2 and 22 For maintenance, repair and upgrading work, appliances such as drills, welding transformers, hand
More informationBaltic Marine Environment Protection Commission
Baltic Marine Environment Protection Commission Maritime Working Group Tallinn, Estonia, 6-8 September 2016 MARITIME 16-2016 Document title Information about remote sensing of SO 2 emissions from ships
More information2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
More informationAll Toyota Dealer Principals, Service Managers, Parts Managers
To: Subject: All Toyota Dealer Principals, Service Managers, Parts Managers Warranty Enhancement Program ZE7 Certain 2007-2009 Camry Certain 2007-2011 Camry Hybrid Certain 2007-2008 Camry Solara Certain
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, PLUNGER, 10 AMPERES 2PDT AND 7 AMPERES 4PDT, RESILIENT SEAL
INCH-POUND MIL-PRF-8805/100G 6 December 2012 SUPERSEDING MIL-PRF-8805/100F 4 October 2004 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, PLUNGER, 10 AMPERES 2PDT AND 7 AMPERES 4PDT, RESILIENT SEAL
More informationA6R-2218 Reversible Axial Piston Power Motors
Instruction Manual A6R-2218 Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM * Stall
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED
INCH-POUND MIL-PRF-8805/77H 19 September, 2000 SUPERSEDING MIL-PRF-8805/77G 3 September 1999 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED This
More information2.0 TEST PROCEDURES AND RESULTS Vibration Test TEST EQUIPMENT AND INSTRUMENTATION QUALITY ASSURANCE PROGRAM 7 ATTACHMENTS
Page No. 2 TABLE OF CONTENTS Page No. 1.0 INTRODUCTION 3 1.1 Scope 3 1.2 References 3 1.3 Test Specimen Description 3 1.4 Summary 3 2.0 TEST PROCEDURES AND RESULTS 4 2.1 Vibration Test 4 3.0 TEST EQUIPMENT
More informationCarter Underwing Refueling Nozzle. Model 64349
Carter Underwing Refueling Nozzle Model 64349 Design Concepts Eaton s Carter product line is the leading manufacturer of nozzles qualified in accordance with SAE AS5877 (MIL-N-5877). Eaton s Carter Model
More informationQDR Process for Defective Vehicles
QDR Process for Defective Vehicles Leonard Fedoruk Director, Vehicle Purchasing Division John Hampson, Branch Chief, Vehicle Engineering n GSA Fleet Value Proposition Right Vehicle Right Price Great Service
More informationAeroquip. Aluminum Compression Crimp Fittings
Aeroquip Aluminum Compression Crimp Fittings Table of Contents 666/667 Medium Pressure PTFE Hose and Aluminum Compression Crimp Fittings... 2 Aluminum Crimp Fittings... 3 Flared Fittings... 4 Flared Fitting
More informationPower distribution SynergEX panelboards. SynergEX. Class I, Division 2 panelboards
Power distribution SynergEX panelboards SynergEX Class I, Division 2 panelboards SynergEX panelboards for hazardous rated areas Maximum safety. Easy access, lower risk and less downtime. One of the biggest
More informationVG95234 Qualified Bayonet-Lock Connectors
Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
More informationDETAIL SPECIFICATION SHEET
METRIC MIL-DTL-38999/36 30 November 2006 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, PLUG, LANYARD RELEASE, FAIL-SAFE, REMOVABLE CRIMP CONTACTS, PINS, SHELL SIZE 25, SERIES III,
More informationINSTALLATION AND OPERATION MANUAL 14-V DC OPTION KITS
May 15/91 Revised INSTALLATION AND OPERATION MANUAL for 14-V DC OPTION KITS Part Numbers 488951-1, 488951-2, 488951-3 and 488951-4 For Use With Hobart Jet-Ex 4 Generator Sets Hobart Brothers Company Airport
More informationSUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD AS58091
SUPPLEMENTAL INFORMATION SHEET QPL 58091 S HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING -4 16 Sept 2014 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED
More informationReliability & Qualification Report for MEMS Based Variable Optical Attenuators
Reliability & Qualification Report for MEMS Based Variable Optical Attenuators P/N: MMVOA-1-1550-S-9/125-XX-0.25-1 Page 1 of 21 Revision History Rev Approval Date ECM/ECR Description of Change 00 10/18/2008
More informationThe parts you need are the parts we have.
When customers need a part that you don t have and the manufacturer can t deliver in time... That s when you call All Current. PART NEEDED PART NEEDED SORRY? CALL Corporate Headquarters 2500 McClellan
More informationMILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A
INCH-POUND MS35307E 25 April 1997 Superseding MS35307D 1 May 1969 MILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A This specification
More informationJoint Oil Analysis Program Spectrometer Standards VHG Labs Inc. Qualification Report For D19-0, D3-100 and D12-XXX Series Standards
Joint Oil Analysis Program Spectrometer Standards VHG Labs Inc. Qualification Report For D19-0, D3-100 and D12-XXX Series Standards NF&LCFT REPORT 441/13-010 Prepared By: MICHAEL PERETICH, PhD Oil Analysis
More informationSPAN CONTROLS. For Quality, Reliability And Service
Span Controls Established in 1987, Span Controls is now one of the leading manufacturers of Switch Mode Power Supplies, Battery Chargers, DC-DC Converters and LED Drivers in India. Having more than 25
More informationPERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
More informationPERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, 10 AMPERES AND LOW LEVEL, UNSEALED
INCH-POUND 2 January 201 SUPERSEDING 1 May 200 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, AMPERES AND LOW LEVEL, UNSEALED This specification is approved for use by all Departments and Agencies
More informationL-Series. Circuit Breaker
L-Series Circuit Breaker Carling Technologies is pleased to introduce the new L-Series Circuit Breaker, a compact, high performance breaker ideally suited for the rigors and confined spaces found in today
More informationArktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
More informationM.P. Hydraulics & Pneumatics
+91-8048014598 M.P. Hydraulics & Pneumatics https://www.indiamart.com/mphydraulicspneumatics/ We, M.P.Hydraulics and Pneumatics are leading Manufacturer and Supplier of Directional Valve, Hydraulic Cylinders,
More informationSUPPLEMENTAL INFORMATION SHEET QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
ULEMENTAL INFORMATION HEET QL 81703 QUALIFICATION HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TETING QL-81703-5 16 June 2015 ULEMENTAL INFORMATION HEET FOR QUALIFIED RODUCT LIT OF RODUCT QUALIFIED
More informationProduct Manual PL31-15LF 04/02/ LF Series Inline Grinders
Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust
More informationQQ-A-250/11F August SUPERSEDING QQ-A-250/GEN. August 27, 1971 FEDERAL SPECIFICATION SHEET ALUMINUM ALLOY 6061, PLATE AND SHEET
August 3 1982 SUPERSEDING QQ-A-250/11E August 27, 1971 FEDERAL SPECIFICATION SHEET ALUMINUM ALLOY 6061, PLATE AND SHEET This specification is approved by the Commissioner, Federal Supply Service, General
More informationAIRCRAFT HANGAR PINCHGUT LAKE
AIRCRAFT HANGAR PINCHGUT LAKE ABSTRACT Please find enclosed Environmental Assessment submission relating to a proposed Aircraft Hangar at Pinchgut Lake, File 200.20.2707. Calv Swift [Course title] File
More informationComponent Mass Study Statistical Benchmarking
Component Mass Study Statistical Benchmarking Benoit Singher, A2Mac1 Automotive Benchmarking Russ Balzer, WorldAutoSteel Donald Malen, University of Michigan GDIS217 Statistical mass benchmarking Programs
More informationSEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS
SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS JUNE 2014 SEACROW CONNECTORS Marine Bronze Connectors for Harsh Environmental Applications Shipboard Application Glenair
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More informationFEDERAL SPECIFICATION ETHER, PETROLEUM; TECHNICAL GRADE. 1.1 Scope. This specification covers technical grade petroleum ether to be used as a solvent.
METRIC 4 May 2015 SUPERSEDING O-E-751C 10 January 2003 FEDERAL SPECIFICATION ETHER, PETROLEUM; TECHNICAL GRADE The General Services Administration has authorized the use of this federal specification by
More informationMILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON
INCH-POUND 4 February 2004 SUPERSEDING MIL-M-38510/116 16 April 1980 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON This specification is approved for
More informationSUPER-MAX INDUCTION MOTOR
Compliance Certificate No.CC014A CSA Listed No. 1077944 SUPER-MAX INDUCTION MOTOR PREMIUM EFFICIENCY SERIES CSA Certified for Class I Division 2 Groups A, B, C, D T3C TOTALLY ENCLOSED FAN COOLED FRAME:
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND PERFORMANCE SPECIFICATION SHEET MIL-PRF-2886/E 28 Septmebr 206 SUPERSEDING MIL-PRF-2886/D w/amendment 0 May 2005 FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION,
More informationArizona-Sonora Border Master Plan. Plan Maestro para la Frontera Arizona-Sonora
Arizona-Sonora Border Master Plan Plan Maestro para la Frontera Arizona-Sonora Project Objectives Develop and implement a plan for identifying, prioritizing, and promoting land port of entry (LPOE), multi-modal
More informationDecember 13, This document was filed with the Board of Public Utilities on December 13, It is awaiting final approval by BPU staff.
JERSEY CENTRAL POWER & LIGHT UNIFORM TECHNICAL AND PROCEDURAL INTERCONNECTION REQUIREMENTS FOR NET METERING FACILITIES FOR INVERTER BASED WIND AND PHOTOVOLTAIC SYSTEMS OF 100 kw OR SMALLER for Atlantic
More informationFresno Yosemite International Airport to 2233 Ventura St, Fresno, CA Google Maps
Fresno Yosemite International Airport to 2233 Ventura St, Fresno, CA 93721 - Google Maps http://maps.google.com/maps?f=d&source=s_d&saddr=fresno+air+terminal,+east+clinton+way,+fresno... Page 2 of 2 Fresno
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-83536/15A 12 July 2004 SUPERSEDING MIL-PRF-83536/15 27 March 1992 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, PERMANENT
More information