The activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH TEST OR QUALIFICATION REFERENCE
|
|
|
- Poppy Beasley
- 5 years ago
- Views:
Transcription
1 S VALIDATED EVERY TWO YEARS 10-Sep-03 SUPERSEDING QPL Aug-01 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFI MIL-PRF FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFI FOR This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements. The activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH GOVERNMENT OR FM01A125V1/100A GMU 1/100A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V1/64A GMU 1/64A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V1/32A GMU 1/32A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V1/16A GMU 1/16A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V1/10A GMU 1/10A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V1/8A GMU 1/8A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V2/10A GMU 2/10A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V1/4A GMU 1/4A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V3/10A GMU 3/10A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V4/10A GMU 4/10A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V1/2A GMU 1/2A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V6/10A GMU 6/10A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V3/4A GMU 3/4A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V1A GMU 1A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V1-1/2A GMU 1-1/2A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V2A GMU 2A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V3A GMU 3A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V4A GMU 4A , /1 Cooper Bussmann (Goldsboro, NC) FM01A125V5A GMU 5A , /1 Cooper Bussmann (Goldsboro, NC) FM02A125V1/500A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1/200A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1/100A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1/64A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1/32A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1/16A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1/10A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1/8A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V2/10A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1/4A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V3/10A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V4/10A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V5/10A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V6/10A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V3/4A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V1-1/2A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V2A , /2 Littelfuse, Inc. (Centralia, IL) AMSC N/A DISTRIBUTION STATEMENT A. -1- Approved for public release; distribution is unlimited. FSC 5920
2 OR FM02A125V3A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V4A , /2 Littelfuse, Inc. (Centralia, IL) FM02A125V5A , /2 Littelfuse, Inc. (Centralia, IL) FM04A125V1/4A AS 1/4A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V3/8A AS 3/8A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V1/2A AS 1/2A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V3/4A AS 3/4A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V1A AS 1A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V1-1/2A AS 1-1/2A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V2A AS 2A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V3A AS 3A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V4A AS 4A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V5A AS 5A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V7A AS 7A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V10A AS 10A , /4 Cooper Bussmann (Goldsboro, NC) FM04A32V15A AS 15A , /4 Cooper Bussmann (Goldsboro, NC) FM04A125V1/16A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V1/8A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V1/4A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V3/8A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V1/2A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V3/4A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V1A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V1-1/2A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V2A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V3A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V4A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V5A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V7A , /4 Littelfuse, Inc. (Centralia, IL) FM04A125V10A , /4 Littelfuse, Inc. (Centralia, IL) FM04A32V15A , /4 Littelfuse, Inc. (Centralia, IL) FM07A125V1/500A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/200A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/100A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/64A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/32A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/16A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/10A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/8A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V2/10A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/4A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V3/10A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V4/10A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/2A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1/20A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V6/10A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V7/10A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V3/4A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V8/10A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V1-1/2A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V2A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V3A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V4A /7 Littelfuse, Inc. (Centralia, IL) FM07A125V5A /7 Littelfuse, Inc. (Centralia, IL) -2-
3 OR FM08A125V1/8A AH 1/8A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V1/4A AH 1/4A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V3/8A AH 3/8A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V1/2A AH 1/2A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V3/4A AH 3/4A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V1A AH 1A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V1-1/2A AH 1-1/2A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V2A AH 2A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V2-1/2A AH 2-1/2A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V3A AH 3A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V4A AH 4A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V5A AH 5A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V7A AH 7A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V10A AH 10A , /8 Cooper Bussmann (Goldsboro, NC) FM08A32V15A AH 15A , /8 Cooper Bussmann (Goldsboro, NC) FM08A125V1/8A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V1/4A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V3/8A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V1/2A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V3/4A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V1A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V1-1/2A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V2A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V2-1/2A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V3A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V4A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V5A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V7A , /8 Littelfuse, Inc. (Centralia, IL) FM08A125V10A , /8 Littelfuse, Inc. (Centralia, IL) FM08A32V15A , /8 Littelfuse, Inc. (Centralia, IL) FM09B250V1/10A MDA 1/10A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V1/8A MDA 1/8A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V1/4A MDA 1/4A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V3/8A MDA 3/8A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V1/2A ABC 1/2A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V1/2A MDA 1/2A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V6/10A MDA 6/10A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V3/4A MDA 3/4A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V3/4A ABC 3/4A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V8/10A MDA 8/10A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V12A ABC 12A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V1A ABC 1A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V1A MDA 1A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V1-1/4A MDA 1-1/4A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V1-1/4A ABC 1-1/4A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V1-1/2A MDA 1-1/2A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V1-1/2A ABC 1-1/2A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V1-6/10A MDA 1-6/10A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V2A ABC 2A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V2A MDA 2A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V2-1/2A MDA 2-1/2A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V2-8/10A MDA 2-8/10A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V3A MDA 3A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V3A ABC 3A , /9 Cooper Bussmann (Black Mountain, NC) FM09B250V3-2/10A MDA 3-2/10A , /9 Cooper Bussmann (Black Mountain, NC) -3-
4 OR FM09A250V4A ABC 4A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V5A ABC 5A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V6A ABC 6A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V8A ABC 8A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V10A ABC 10A , /9 Cooper Bussmann (Black Mountain, NC) FM09A250V15A ABC 15A , /9 Cooper Bussmann (Black Mountain, NC) FM09A125V20A ABC 20A , /9 Cooper Bussmann (Black Mountain, NC) FM09B125V4A MDA 4A , /9 Cooper Bussmann (Black Mountain, NC) FM09B125V5A MDA 5A , /9 Cooper Bussmann (Black Mountain, NC) FM09B125V6-1/4A MDA 6-1/4A , /9 Cooper Bussmann (Black Mountain, NC) FM09B125V7A MDA 7A , /9 Cooper Bussmann (Black Mountain, NC) FM09B125V8A MDA 8A , /9 Cooper Bussmann (Black Mountain, NC) FM09B125V10A MDA 10A , /9 Cooper Bussmann (Black Mountain, NC) FM09B125V12A MDA 12A , /9 Cooper Bussmann (Black Mountain, NC) FM09B125V15A MDA 15A , /9 Cooper Bussmann (Black Mountain, NC) FM09B125V20A MDA 20A , /9 Cooper Bussmann (Black Mountain, NC) FM10A125V1/8A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V1/4A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V3/8A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V1/2A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V3/4A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V1A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V1-1/2A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V2A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V3A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V4A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V5A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V7A /10 Littelfuse, Inc. (Centralia, IL) FM10A125V10A /10 Littelfuse, Inc. (Centralia, IL) FM10A32V15A /10 Littelfuse, Inc. (Centralia, IL) FM12A125V1/8A P600L-125-1/ , /12 AEM, Inc. FM12A125V1/4A P600L-125-1/ , /12 AEM, Inc. FM12A125V3/8A P600L-125-3/ , /12 AEM, Inc. FM12A125V1/2A P600L-125-1/ , /12 AEM, Inc. FM12A125V3/4A P600L-125-3/ , /12 AEM, Inc. FM12A125V1A P600L , /12 AEM, Inc. FM12A125V1.5A P600L , /12 AEM, Inc. FM12A125V2A P600L , /12 AEM, Inc. FM12A125V3A P600L , /12 AEM, Inc. FM12A125V4A P600L , /12 AEM, Inc. FM12A125V5A P600L , /12 AEM, Inc. FM12A72V1/8A P600L-72-1/ , /12 AEM, Inc. FM12A72V1/4A P600L-72-1/ , /12 AEM, Inc. FM12A72V1/2A P600L-72-1/ , /12 AEM, Inc. FM12A72V3/4A P600L-72-3/ , /12 AEM, Inc. FM12A72V3/8A P600L-72-3/ , /12 AEM, Inc. FM12A72V1A P600L , /12 AEM, Inc. FM12A72V1.5A P600L , /12 AEM, Inc. FM12A72V2A P600L , /12 AEM, Inc. FM12A72V3A P600L , /12 AEM, Inc. FM12A72V4A P600L , /12 AEM, Inc. FM12A72V5A P600L , /12 AEM, Inc. FM12A72V6A P600L , /12 AEM, Inc. FM12A72V7.5A P600L , /12 AEM, Inc. FM12A72V10A P600L , /12 AEM, Inc. -4-
5 OR FM12A72V15A P600L , /12 AEM, Inc. FM12A50V20A P600L , /12 AEM, Inc. -5-
6 Manufacturer and Supplier Location Information Manufacturer: AEM, Inc. (CAGE Code: 1GLF1) Location: Sorrento Valley Road, San Diego, CA , US Plant Location: Same Address as Manufacturer Manufacturer: Cooper Bussmann (CAGE Code: 71400) Location: P.O. Box 14460, St. Louis, MO 63178, US Plant Locations: 1. Cooper Bussmann (Black Mountain, NC), 1000 Cragmont Road, Black Mountain, NC 28711, US 2. Cooper Bussmann (Goldsboro, NC), 210 Dixie Trail, Goldsboro, NC 27530, US Manufacturer: Littelfuse, Inc. (CAGE Code: 75915) Location: 800 E. Northwest Highway, Des Plaines, IL , US Plant Location: Littelfuse, Inc. (Centralia, IL), 100 W. Johnson Street, Centralia, IL 62801, US -6-
ANNUALLY 12 September 1997 SUPERSEDING QPL-234l May 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION.
QUALIFICATIONS VALIDATED QPL-234l9-39 ANNUALLY 12 September 1997 SUPERSEDING QPL-234l9-38 5 May 1997 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-F-234l9 FUSE, CARTRIDGE,
The activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY TWO YEARS 25-May-04 SUPERSEDING QPL-19207-44 18-Mar-03 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFI MIL-PRF-19207 FUSEHOLDERS, EXTRACTOR POST TYPE BLOWN FUSE
DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-23419
Specification Details: Specification: MIL-PRF-23419 Title: Fuse, Cartridge, Instrument Type Federal Supply Class (FSC): 5920 Conventional: No Specification contains quality assurance program: No MIL-STD-790
ANNUALLY 29 May 1996 SUPERSEDING QPL October 1995 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-83503
QUALIFICATIONS VALIDATED ANNUALLY 29 May 1996 SUPERSEDING QPL-83503-30 3 October 1995 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-83503 CONNECTOR, ELECTRICAL, FLAT
MS17340 N 12 A 1 FINISH AN EXAMPLE OF THE GOVERNMENT DESIGNATION WHICH IDENTIFIES THE COVER OR RECEPTACLE IS SHOWN B MS17343 C 20 FINISH SIZE -1-
QUALIFICATIONS VALIDATED EVERY 24 MONTHS 19-Jul-99 SUPERSEDING QPL-22992-40 31-Mar-98 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATI MIL-C-22992 CONNECTOR, PLUGS AND RECEPTACLES,
QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-DTL FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 F MAXIMUM
QUALIFICATION CERTIFIED SEPTEMBER 2000 22 July 2002 SUPERSEDING QPL-18240-32 15 November 2001 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-DTL-18240 FASTENER ELEMENT,
SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD AS58091
SUPPLEMENTAL INFORMATION SHEET QPL 58091 S HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING -4 16 Sept 2014 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED
DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-19207
Specification Details: DLA Land and Maritime - VQ Specification: MIL-PRF-19207 Title: Fuseholders, Extractor Post Type, Blown Fuse Indicating and Nonindicating Federal Supply Class (FSC): 5920 Conventional:
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-24236/24E 5 April 2006 SUPERSEDING MIL-PRF-24236/24D 22 January 2001 PERFORMANCE SPECIFICATION SHEET SWITCHES, THERMOSTATIC, (BIMETALLIC), SUBMINIATURE, TYPE I, HERMETICALLY SEALED,
SUPPLEMENTAL INFORMATION SHEET QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
ULEMENTAL INFORMATION HEET QL 81703 QUALIFICATION HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TETING QL-81703-5 16 June 2015 ULEMENTAL INFORMATION HEET FOR QUALIFIED RODUCT LIT OF RODUCT QUALIFIED
COMMERCIAL ITEM DESCRIPTION RELAYS, ELECTROMAGNETIC, GENERAL PURPOSE 10 AMPERES, 1-3PDT, AC AND DC COILS, SOCKET MOUNT
INCH-POUND A-A-55143/1C 28 February 200 SUPERSEDING A-A-55143/1B 15 October 2000 COMMERCIAL ITEM DESCRIPTION RELAYS, ELECTROMAGNETIC, GENERAL PURPOSE 10 AMPERES, 1-, AC AND DC COILS, SOCKET MOUNT The General
COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET FUSE, CARTRIDGE, INSTRUMENT TYPE, 5 MM X 20 MM, QUICK-ACTING, LOW-BREAKING CAPACITY
[METRIC] 4 May 2009 SUPERSEDING --59688/2 October 28, 2004 COMMERCIL ITEM DESCRIPTION SPECIFICTION SHEET FUSE, CRTRIDGE, INSTRUMENT TYPE, 5 MM X 20 MM, QUICK-CTING, LOW-REKING CPCITY The General Services
DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-28876
Specification Details: DLA Land and Maritime - VQ Specification: MIL-PRF-28876 Title: Connectors, Fiber Optic, Circular, Plug and Receptacle Style, Multiple Removable, Termini Federal Supply Class (FSC):
MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, NAND GATES, MONOLITHIC SILICON
INCH-POUND MIL-M-38510/370A 15 July 2004 SUPERSEDING MIL-M-38510/370(USAF) 18 March 1983 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, NAND GATES, MONOLITHIC
PERFORMANCE SPECIFICATION SHEET BATTERY, RECHARGEABLE, NICKEL CADMIUM, VENTED, 1.2-VOLT, 13 AMPERE- HOUR, BB-475/A CELL
INCH-POUND 25 FEB 2011 PERFORMANCE SPECIFICATION SHEET BATTERY, RECHARGEABLE, NICKEL CADMIUM, VENTED, 1.2-VOLT, 13 AMPERE- HOUR, BB-475/A CELL This specification is approved for use within Army CECOM Life
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED
INCH-POUND MIL-PRF-8805/77H 19 September, 2000 SUPERSEDING MIL-PRF-8805/77G 3 September 1999 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED This
This specification is approved for use by all Departments and Agencies of the Department of Defense.
INCH-POUND MIL-PRF-39014/5F 16 September 1997 SUPERSEDING MIL-C-39014/5E 16 August 1978 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), ESTABLISHED RELIABILITY,
SERVICE No- 355 BULLETIN
PIPER SERVICE No- 355 BULLETIN Piper Aircraft Corporation Lock Haven, Pennsylvan ia, U. S.A. FAA DOA SO-1 Approved June 5, 1972 S Subject: Fuel Selector Valve Lubrication Models and Serial Numbers Affected:
MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON
INCH-POUND 4 February 2004 SUPERSEDING MIL-M-38510/116 16 April 1980 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON This specification is approved for
PERFORMANCE SPECIFICATION SHEET RUBBER, SYNTHETIC, TUBING
INCH-POUND 15 June 2009 SUPERSEDING MIL-R-6855/4 16 February 1987 PERFORMANCE SPECIFICATION SHEET RUBBER, SYNTHETIC, TUBING This specification is approved for use by all Departments and Agencies of the
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
INCH-POUND MIL-DTL-23053/1C 17 June 1996 SUPERSEDING MIL-I-23053/1B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
COMMERCIAL ITEM DESCRIPTION PINTLE ASSEMBLY, TOWING, MANUAL RELEASE, , AND LBS CAPACITY
[INCH-POUND] July 30, 1996 SUPERSEDING (see 7.5) COMMERCIAL ITEM DESCRIPTION PINTLE ASSEMBLY, TOWING, MANUAL RELEASE, 18 000, 40 000 AND 100 000 LBS CAPACITY The General Services Administration has authorized
DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT
INCH-POUND 16 February 2010 SUPERSEDING AN818 Rev 19 15 June 1994 DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT This specification is approved for use by all Departments and Agencies of the Department
MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05
INCH-POUND MIL-C-11015/18E 14 May 2001 SUPERSEDING MIL-C-11015/18D 28 September 1970 MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05 The requirements for
BULLETIN Piper Aircraft Corporation Lock Haven, Pennsylvania, U.S.A.
SERVICE No. 35 BULLETIN Piper Aircraft Corporation Lock Haven, Pennsylvania, U.S.A. "FAA DOA SO-1 Approved" June 5, 1972 S Subject: Subject: Fuel Selector valve LuDricatlon Models and Serial Numbers Affected:
PERFORMANCE SPECIFICATION SHEET BATTERY, STORAGE, AIRCRAFT, MAINTENANCE-FREE, 24-VOLT, 1.5-AMPERE-HOUR
METRIC MIL-PRF-8565/6A (AS) 25 June 2001 SUPERSEDING DOD-B-8565/6(AS) 26 June 1987 PERFORMANCE SPECIFICATION SHEET BATTERY, STORAGE, AIRCRAFT, MAINTENANCE-FREE, 24-VOLT, 1.5-AMPERE-HOUR This specification
DETAIL SPECIFICATION SHEET SWITCHES, ROTARY, SNAP ACTION CLASS 1SR BASE MOUNTED, SIDE CONNECTED
INCH-POUND 6 February 2006 SUPERSEDING MIL-S-15291/3A(SH) 22 July 1991 DETAIL SPECIFICATION SHEET SWITCHES, ROTARY, SNAP ACTION CLASS 1SR BASE MOUNTED, SIDE CONNECTED This specification is approved for
COMMERCIAL ITEM DESCRIPTION RELAYS, ELECTROMAGNETIC, GENERAL PURPOSE 10 AMPERES, 1-3PDT, AC AND DC COILS, FLANGE MOUNT
INCH-POUND w/amendment 1 1 November 2005 SUPERSEDING A-A-55143/2A 15 October 2000 COMMERCIAL ITEM DESCRIPTION RELAYS, ELECTROMAGNETIC, GENERAL PURPOSE 10 AMPERES, 1-, AC AND DC COILS, FLANGE MOUNT The
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22710/14F 20 April 2001 SUPERSEDING MIL-S-22710/14E 18 October 1982 PERFORMANCE SPECIFICATION SHEET SWITCHES, CODE INDICATING WHEEL (PRINTED CIRCUIT), (THUMBWHEEEL SWITCH ASSEMBLY, INTEGRAL
PERFORMANCE SPECIFICATION SHEET
INCH-POUND PERFORMANCE SPECIFICATION SHEET MIL-PRF-2886/E 28 Septmebr 206 SUPERSEDING MIL-PRF-2886/D w/amendment 0 May 2005 FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION,
DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT
INCH-POUND 19 August 2014 SUPERSEDING w/amendment 1 23 January 2013 DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT This specification is approved for use by all Departments and Agencies of the Department
DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55116
Specification Details: Specification: MIL-DTL-55116 Title: Connectors: Miniature Audio, Five Pin and Six Pin Federal Supply Class (FSC): 5935 Conventional: Yes Specification contains quality assurance
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, 10 AMPERES AND LOW LEVEL, UNSEALED
INCH-POUND 2 January 201 SUPERSEDING 1 May 200 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, AMPERES AND LOW LEVEL, UNSEALED This specification is approved for use by all Departments and Agencies
DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55116
Specification Details: Specification: MIL-DTL-55116 Title: Connectors: Miniature Audio, Five Pin and Six Pin Federal Supply Class (FSC): 5935 Conventional: Yes Specification contains quality assurance
DETAIL SPECIFICATION SHEET DISK, VALVE. Inactive for new design after 15 October 1998.
INCH-POUND MS29521H 23 September 2015 SUPERSEDING MS29521G 7 April 2009 DETAIL SPECIFICATION SHEET DISK, VALVE Inactive for new design after 15 October 1998. This specification is approved for use by all
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
INCH-POUND 17 June 1996 SUPERSEDING MIL-I-23053/11B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED This specification
DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 3 December 2012 SUPERSEDING 30 September 2011 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department of
COMMERCIAL ITEM DESCRIPTION HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY
[INCH-POUND] A-A-59613 August 16, 2001 SUPERSEDING ZZ-H-521F May 28, 1993 COMMERCIAL ITEM DESCRIPTION HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY The General Services Administration has authorized the
COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02
METRIC A-A-59584C 15 September 2008 SUPERSEDING A-A-59584B 23 September 2003 COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02 The General Services
COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03
METRIC A-A-59585C 15 September 2008 SUPERSEDING A-A-59585B 23 September 2003 COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03 The General Services
SANDAG Vanpool Program Guidelines as of February 2018
SANDAG Vanpool Program Guidelines as of February 2018 The San Diego Association of Governments (SANDAG) administers the SANDAG Vanpool Program to provide alternative transportation choices to commuters,
DETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II
INCH-POUND 08 December 2009 DETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II This specification is approved for use
Circuit Protection Solutions Product Guide
Circuit Protection Solutions Product Guide Product Guide Low Voltage Fuses and Fusegear NH DIN Industrial fuse links and bases Conforms to IEC 60269 & VDE 0636 General purpose full range & Motor protection
MILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A
INCH-POUND MS35307E 25 April 1997 Superseding MS35307D 1 May 1969 MILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A This specification
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
INCH-POUND MIL-DTL-23053/5C 17 June 1996 SUPERSEDING MIL-I-23053/5B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED This specification
QQ-A-250/11F August SUPERSEDING QQ-A-250/GEN. August 27, 1971 FEDERAL SPECIFICATION SHEET ALUMINUM ALLOY 6061, PLATE AND SHEET
August 3 1982 SUPERSEDING QQ-A-250/11E August 27, 1971 FEDERAL SPECIFICATION SHEET ALUMINUM ALLOY 6061, PLATE AND SHEET This specification is approved by the Commissioner, Federal Supply Service, General
PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE
INCH-POUND 12 December 2014 SUPERSEDING MIL-PRF-6081D w/amendment 1 30 January 2009 PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE This specification is approved for use by all Departments and Agencies
DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 30 September 2011 SUPERSEDING MS51844D 19 April 2007 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department
PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
MILITARY SPECIFICATION SHEET
INCH-POUND MS21363B 2 July 2007 SUPERSEDING MS21363A(USAF) 2 July 1985 MILITARY SPECIFICATION SHEET COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, MAGNETICALLY SHIELDED, (FERRITE CORE-FERRITE SLEEVE),
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, PLUNGER, 10 AMPERES 2PDT AND 7 AMPERES 4PDT, RESILIENT SEAL
INCH-POUND MIL-PRF-8805/100G 6 December 2012 SUPERSEDING MIL-PRF-8805/100F 4 October 2004 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, PLUNGER, 10 AMPERES 2PDT AND 7 AMPERES 4PDT, RESILIENT SEAL
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/24H 8 June 2018 SUPERSEDING MIL-DTL-24308/24H w/amendment 4 8 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL,
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-83536/15A 12 July 2004 SUPERSEDING MIL-PRF-83536/15 27 March 1992 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, PERMANENT
DETAIL SPECIFICATION SHEET
METRIC MIL-DTL-38999/31E 12 March 2014 SUPERSEDING MIL-DTL-38999/31D 19 April 2002 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, PLUG, LANYARD RELEASE, FAIL-SAFE, REMOVABLE CRIMP
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED
INCH-POUND 14 June 2010 SUPERSEDING 22 May 2006 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED This specification is approved for use by all Departments and Agencies of the Department
MILITARY SPECIFICATION SHEET
m MIL-C-85049/Z6A 30 November 19YLI SUPERSEDING MIL-C-85049/2ti 16 January 1980 MS3419C 10 Ma 19&? MS316fB 10 May 198Z MILITARY SPECIFICATION SHEET CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL,
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22710/15H 20 April 2001 SUPERSEDING MIL-S-22710/15G 29 March 1985 PERFORMANCE SPECIFICATION SHEET SWITCHES, CODE INDICATING WHEEL (PRINTED CIRCUIT), (THUMBWHEEEL SWITCH ASSEMBLY, SEALED
PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE
INCH-POUND 10 November 1997 SUPERSEDING MIL-L-6081C 15 April 1964 PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE This specification is approved for use by all Departments and Agencies of the Department
MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL
INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used
DETAIL SPECIFICATION SHEET
METRIC MIL-DTL-38999/36 30 November 2006 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, PLUG, LANYARD RELEASE, FAIL-SAFE, REMOVABLE CRIMP CONTACTS, PINS, SHELL SIZE 25, SERIES III,
Fast-acting supplemental fuse. For superior protection, Bussmann recommends upgrading to Low-Peak Class CC fuses. See data sheet # 1023.
Technical Data 2020 Effective April 204 Supersedes April 200 KLM Series 3 32 x - 2 600Vac/dc Fast-acting supplemental fuses 600Vac/dc to 30A Description Fast-acting supplemental fuse. For superior protection,
DETAIL SPECIFICATION SHEET TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL. Inactive for new design after 28 September 1993.
INCH-POUND MS500040K 17 November 2011 SUPERSEDING MS500040J 1 March 1991 DETAIL SPECIFICATION SHEET TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL Inactive for new design after 28 September 1993.
DETAIL SPECIFICATION SHEET CAP INSERT, ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING
INCH-POUND Rev 13 7 August 2014 SUPERSEDING w/amendment 1 20 November 2013 DETAIL SPECIFICATION SHEET CAP INSERT, ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING This specification is approved for use by
REVISIONS LTR DESCRIPTION DATE APPROVED
REVISIONS LTR DESCRIPTION DTE PPROVED Change CGE code from 037Z3 to 16236 and e-mail address for comments. Removed approved sources requirements. 4 June 2008. bdouni Prepared in accordance with SME Y14.100
PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS
METRIC 20 January 2012 SUPERSEDING MIL-PRF-7024E 1 October 1997 PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS Comments, suggestions, or questions on this document should
DEPARTMENT OF DEFENSE STANDARD PRACTICE IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE
NOTICE OF CHANGE INCH-POUND MIL-STD-681D NOTICE 1 19 June 2000 DEPARTMENT OF DEFENSE STANDARD PRACTICE IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE TO ALL HOLDERS OF MIL-STD-681D: 1. THE
Navigating Safety and Compliance in Registration is now open online for the 2018 Idealease/NPTC Safety Seminars!
In This Issue: Navigating Safety and Compliance in 2018 Registration is now open on line for the 2018 Idealease/NPTC Safety Seminars! Seminar Schedule Are You Sharing Your Driver With Another Company?
Genuine Aircraft Hardware Co. MIL H 6000 B It is for push on and clamp applications.
Genuine Aircraft Hardware Co. MIL H 6000 B This oil-resistant tube is reinforced with a high strength, mildew-resistant yarn designed to withstand oil, alcohol, coolant, fuel, water and temperatures from
Helicopter Dynamic Components Project. Presented at: HCAT Meeting January 2006
Helicopter Dynamic Components Project Presented at: HCAT Meeting January 2006 Report Documentation Page Form Approved OMB No. 0704-0188 Public reporting burden for the collection of information is estimated
NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links
Version:- 7.0 Date of Issue:- July 2017 Page 1 of 19 NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links 1. Purpose The purpose of this document is to detail
Transaction Trend. United States. Report Q LE s Real Estate Intelligence is Your Strategic Advantage
Sa m pl e Q4 2016 United States Transaction Trend Report LE s Real Estate Intelligence is Your Strategic Advantage Lodging Econometrics 500 Market Street, Suite 13 Portsmouth, NH 03801-3481 USA +1 603.427.9542
Electric vehicle auxiliary fuses 500 Vdc, A
Supersedes February 2017 BUSSMANN SERIES 500 Vdc, 20-50 A Agency information Designed to: JASO D622 ISO 8820-8 Manufactured under a TS16949 quality system for compliance with automotive requirements RoHS
DEPARTMENT OF DEFENSE INTERFACE STANDARD
INCH-POUND MIL-STD-1560C 23 January 2017 SUPERSEDING MIL-STD-1560C 11 February 2015 DEPARTMENT OF DEFENSE INTERFACE STANDARD INSERT ARRANGEMENTS FOR MIL-DTL-38999, MIL-DTL-27599, AND SAE-AS29600 SERIES
[INCH-POUND] A-A December 1999 SUPERSEDING MIL-C-4109F 31 October 1986
![[INCH-POUND] A-A December 1999 SUPERSEDING MIL-C-4109F 31 October 1986](/thumbs/90/102223285.jpg "[INCH-POUND] A-A December 1999 SUPERSEDING MIL-C-4109F 31 October 1986")
[INCH-POUND] 30 December 1999 SUPERSEDING MIL-C-4109F 31 October 1986 COMMERCIAL ITEM DESCRIPTION COUPLING HALVES, QUICK-DISCONNECT The General Services Administration has authorized the use of this commercial
National Routing Number Administration p-ani Activity and Projected Exhaust Report
National Routing Number Administration 2016 p-ani Activity and Projected Exhaust Report The ATIS Industry Numbering Committee developed the P-ANI Administration Guidelines, which contain the following
DETAIL SPECIFICATION HOSE, SYNTHETIC RUBBER - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT
INCH-POUND 16 April 2007 SUPERSEDING MIL-DTL-8794E 22 September 2000 DETAIL SPECIFICATION HOSE, SYNTHETIC RUBBER - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT This specification is approved for use by all
DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R
INCH-POUND MS24266P 7 August 2015 SUPERSEDING MS24266N 20 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R Inactive for new design after 14
PERFORMANCE SPECIFICATION GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395
METRIC 24 January 2005 SUPERSEDING MIL-PRF-81322F 21 July 1998 PERFORMANCE SPECIFICATION GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395 This specification is approved for use
SPECIFICATION SHEET P700L CURRENT LIMITING FUSE SURFACE MOUNT MODEL
11525 Sorrento Valley Rd. San Diego, California 92121 (858) 481-0210 SPECIFICATION SHEET P700L CURRENT LIMITING FUSE SURFACE MOUNT MODEL REVISION: A B C D E F G H J DATE: 10/95 2/96 2/00 10/95 2/96 10/98
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/52D 12 September 2012 SUPERSEDING MIL-DTL-55302/52D 17 December 2003 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU,
The Highest Quality Heavy Duty Vehicular Electrical Switches and Components at Competitive Prices
The Highest Quality Heavy Duty Vehicular Electrical Switches and Components at Competitive Prices UCOM INC was created in 1994 to fill a specific niche in the marketplace. We specialize in providing the
DETAIL SPECIFICATION GASKETS, WAVEGUIDE FLANGE GENERAL SPECIFICATION FOR
INCH-POUND 25 November 1998 SUPERSEDING MIL-G-24211 28 MARCH 1966 DETAIL SPECIFICATION GASKETS, WAVEGUIDE FLANGE GENERAL SPECIFICATION FOR This specification is approved for use by all Departments and
Cold Resistance (Ohm) Note 1
P700L Series Part Numbering System P700L - 72-1.0 Fuse Type Voltage Amp Part Number/Rating Cold Resistance (Ohm) Note 1 Overload Interrupt Time (Second) Nominal Rating - Note 2/3 Maximum I 2 T (Ampere
QQ-A-200/1D 23 June 1983 SUPERSEDING QQ-A-200/1C August 20, 1970 FEDERAL SPECIFICATION SHEET
23 June 1983 SUPERSEDING QQ-A-200/1C August 20, 1970 FEDERAL SPECIFICATION SHEET ALUMINUM ALLOY 3003, BAR, ROD, SHAPES, TUBE AND WIRE, EXTRUDED This specification was approved by the Assistant Administrator,
DETAIL SPECIFICATION SHEET
INCHPOUND MILDTL85052/1C 30 March 2005 SUPERSEDING MILC85052/1B 30 MAY 1984 DETAIL SPECIFICATION SHEET CLAMP, LOOP, TUBE177 PH CRES, 275 o F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT This specification
6.3 mm reverse quick connect
BUSSMANN SERIES Pre-production and sample electric vehicle auxiliary fuses 500 Vdc, 5-50 A Agency information Designed to: JASO D622 ISO 8820-8 Manufactured under a IATF 16949 quality system for compliance
SM1206 Series. Overload Interrupt Time (Second) Nominal Rating - Note 2. Cold Resistance (Ohm) Note 1. Maximum I 2 T (Ampere 2 Second) Nominal Rating
SM1206 Series Part Numbering System SM1206-32 - 1.0 Fuse Type Voltage Amp Part Number/Rating Cold Resistance (Ohm) Note 1 Overload Interrupt Time (Second) Nominal Rating - Note 2 Maximum I 2 T (Ampere
Net Metering Service. Customer Information Package
Net Metering Service Customer Information Package March 20, 2017 Net Metering - The means of measuring the difference between the electricity supplied by an electric utility and the electricity generated
DETAIL SPECIFICATION SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES
INCH-POUND MIL-DTL-83731/1B July 010 SUPERSEDING MIL-S-83731/1A 0 March 1987 DETAIL SPECIFICATI SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES Inactive for
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL
ALERT SERVICE LETTER
Citation TITLE ALERT SERVICE LETTER ASL525-32-21 LANDING GEAR - TRANSMITTAL OF GOODRICH 2-1559-32-4, MAIN LANDING GEAR - BRAKE ASSEMBLY - P/N S 2-1559-1 AND 2-1559-2 - CESSNA CITATION AIRCRAFT - INTRODUCTION
PERFORMANCE SPECIFICATION
METRIC 05 November 2015 SUPERSEDING MIL-PRF-7870D 30 April 2010 PERFORMANCE SPECIFICATION LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) This specification is approved for use by all Departments
ILLUSTRATED PARTS CATALOG STC SR01616SE
ILLUSTRATED PARTS CATALOG STC SR066SE ENGINE INLET BARRIER FILTER SYSTEM Sikorsky S-76A+/A++/C/C+ This document provides information to assist with the identification of parts and assemblies for the 076T-
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21023-6 Any reference to SABS 0241 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Tachograph centres Installation
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-17361/4B(SH) 19 September 2006 SUPERSEDING MIL-C-17361/4A(SH) 13 March 1995 DETAIL SPECIFICATION SHEET CIRCUIT BREAKERS, AIR, ELECTRIC, INSULATED HOUSING (SHIPBOARD USE) TYPES AQB-A101,
MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)
This data sheet contains the MIL-PRF-39006 ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please
Electrical & Power Study May Sponsored by:
Electrical & Power Study May 2013 Introduction & Methodology Objective This study was conducted by Consulting-Specifying Engineer to evaluate customer awareness, usage of and preference for suppliers of
DETAIL SPECIFICATION SHEET
INCH-POUND 25 November 1996 SUPERSEDING MIL-F-16377/53A(SH) 9 December 1988 DETAIL SPECIFICATION SHEET FIXTURES, INCANDESCENT, DETAIL LIGHTING, LANTERN, HAND, PORTABLE AND RELAY WATERTIGHT SYMBOLS 100.2,
GOVERNMENT RELATIONS BULLETIN
GOVERNMENT RELATIONS BULLETIN September 2, 2015 GRB 15-008 Contact: Kathy Van Kleeck Summary of State Laws Governing Mopeds September 2015 This chart summarizes the laws governing "limited displacement/speed"
Page 1 of 5 CUSTOMER CLASS FILE Cooper Bussmann, Inc. 1422-30 053787_C_000 P.O. Box 14460, FUSES-Supplemental Fuses - Component Acceptance St. Louis MO 63178-4460 USA Refer to Class Description for program