EAL Level 3 NVQ Extended Diploma in Installation and Commissioning (QCF) Qualification Code: 600/1650/4
|
|
|
- Alexandrina Carter
- 6 years ago
- Views:
Transcription
1 EAL Level 3 NVQ Extended Diploma in Installation and Commissioning (QCF) Qualification Code: 600/1650/4 Learners are required to complete the four mandatory units, plus three technically specific Performing Engineering Operations (PEO) level 2 units from Group A (Engineering Practices) or five units from Group B (Technical Support). Learners must then complete one of the level 3 pathways from Group C. Qualification Credit : Qualification (Guided Learning Hours): Mandatory Units QICM3/001 QICM3/002 Complying with statutory regulations and organisational safety requirements Using and interpreting engineering data and documentation A/601/ Y/601/5102 QICM3/003 Working efficiently and effectively in engineering K/601/5055 QICM3/004 Handing over and confirming completion of installation or commissioning activities D/601/0547 1
2 Group A: Engineering Practices Learners choosing this group must complete three PEO level 2 units from the list below. Note: Only one unit from 4, 32 and 61 may be included in the learner s choice of three. QPEO2/004 QPEO2/005 Producing mechanical engineering drawings using a CAD system Producing components using hand fitting techniques J/600/ Y/600/5797 QPEO2/006 Producing mechanical assemblies H/600/5799 QPEO2/007 Forming and assembling pipework systems T/600/5855 QPEO2/008 Carrying out aircraft detail fitting activities A/600/5856 QPEO2/009 Installing aircraft mechanical fasteners F/600/5857 QPEO2/010 Producing aircraft detail assemblies J/600/5858 QPEO2/011 Preparing and using lathes for turning operations L/600/5859 QPEO2/012 Preparing and using milling machines F/600/5860 QPEO2/013 Preparing and using grinding machines J/600/5861 QPEO2/014 Preparing and proving CNC machine tool programs R/600/5863 QPEO2/015 Preparing and using CNC turning machines Y/600/5864 QPEO2/016 Preparing and using CNC milling machines D/600/5865 QPEO2/017 Preparing and using CNC machining centres H/600/5866 QPEO2/018 Preparing and using industrial robots M/600/5868 QPEO2/019 Maintaining mechanical devices and equipment T/600/5869 QPEO2/020 Assembling and testing fluid power systems K/600/5870 QPEO2/021 Maintaining fluid power equipment F/600/5874 QPEO2/022 Producing sheet metal components and assemblies Y/600/5878 QPEO2/023 Producing platework components and assemblies R/600/5880 QPEO2/024 QPEO2/025 Cutting and shaping materials using thermal cutting equipment Preparing and proving CNC fabrication machine tool programs H/600/ M/600/5885 QPEO2/026 Preparing and using CNC fabrication machinery A/600/5887 Continues on page 3 2
3 QPEO2/027 QPEO2/028 QPEO2/029 QPEO2/030 QPEO2/031 QPEO2/032 Preparing and using manual metal arc welding equipment Preparing and using manual TIG or plasma-arc welding equipment Preparing and using manual MIG, MAG and other continuous wire welding equipment Preparing and using manual gas welding equipment Preparing and using manual flame brazing and bronze welding equipment Producing electrical or electronic engineering drawings using a CAD system J/600/ F/600/ R/600/ H/600/ Y/600/ M/600/5904 QPEO2/033 Wiring and testing electrical equipment and circuits J/600/5908 QPEO2/034 QPEO2/035 Forming and assembling electrical cable enclosure and support systems Assembling, wiring and testing electrical panels/components mounted in enclosures J/600/ R/600/5913 QPEO2/036 Assembling and testing electronic circuits K/600/5917 QPEO2/037 Maintaining electrical equipment/systems A/600/5923 QPEO2/038 Maintaining electronic equipment/systems J/600/5925 QPEO2/039 QPEO2/040 QPEO2/041 QPEO2/042 QPEO2/043 QPEO2/044 QPEO2/045 Maintaining and testing process instrumentation and control devices Wiring and testing programmable controller based systems Using wood for pattern, modelmaking and other engineering applications Assembling pattern, model and engineering woodwork components Producing composite mouldings using wet lay-up techniques Producing composite mouldings using pre-preg laminating techniques Producing composite mouldings using resin infusion techniques D/600/ K/600/ T/600/ A/600/ J/600/ L/600/ Y/600/5945 Continues on page 4 3
4 QPEO2/046 Producing composite assemblies K/600/5948 QPEO2/047 QPEO2/048 QPEO2/049 Producing components by rapid prototyping techniques Producing and preparing sand moulds and cores for casting Producing and preparing molten materials for casting M/600/ M/600/ A/600/5954 QPEO2/050 Producing cast components by manual means J/600/5956 QPEO2/051 Fettling, finishing and checking cast components L/600/5960 QPEO2/052 Finishing surfaces by applying coatings or coverings R/600/5961 QPEO2/053 Finishing surfaces by applying treatments H/600/5964 QPEO2/054 Carrying out heat treatment of engineering materials T/600/5967 QPEO2/055 Carrying out hand forging of engineering materials A/600/5968 QPEO2/056 QPEO2/057 QPEO2/058 QPEO2/059 QPEO2/060 QPEO2/061 Stripping and rebuilding motorsport vehicles (precompetition) Inspecting a motorsport vehicle during a competition Diagnosing and rectifying faults on motorsport vehicle systems (during competition) Carrying out maintenance activities on motorsport vehicle electrical equipment Stripping and rebuilding motorsport engines (precompetition) Producing CAD models (drawings) using a CAD system T/600/ F/600/ H/600/ H/600/ L/600/ Y/600/5993 4
5 Pathway ICC: Traction Lift Installation Learners choosing this pathway must complete all of the following: QICM3/035 Carrying out fault diagnosis on lift installations R/601/0660 QICM3/036 Measuring and setting out lift installations M/601/0665 QICM3/037 Installing lift well and ancillary equipment A/601/0667 QICM3/038 Installing traction lift equipment F/601/0668 QICM3/039 Installing lift ropes and chains J/601/0669 QICM3/040 Installing lift doors, frames and ancillary components J/601/0672 QICM3/041 Checking and setting lift installations L/601/0673 8
6 Pathway ICD: Hydraulic Lift Installation Learners choosing this pathway must complete all of the following: QICM3/035 Carrying out fault diagnosis on lift installations R/601/0660 QICM3/036 Measuring and setting out lift installations M/601/0665 QICM3/037 Installing lift well and ancillary equipment A/601/0667 QICM3/039 Installing lift ropes and chains J/601/0669 QICM3/040 Installing lift doors, frames and ancillary components J/601/0672 QICM3/041 Checking and setting lift installations L/601/0673 QICM3/042 Installing hydraulic lift equipment R/601/0674 9
EAL Level 3 NVQ Extended Diploma in Electrical and Electronic Engineering (QCF) 600/9931/8
Rule of combination (qualification structure) Structure of the EAL Level 3 NVQ Extended Diploma The Extended Diploma is comprised of a Level 3 Engineering Qualification extended by inclusion of technically
NGINEERING. Level 3 NVQ Diploma in. Mechanical Manufacturing Engineering. Qualification Specification. Issue 1.1
1 www.eal.org.uk Level 3 NVQ Diploma in NGINEERING Mechanical Manufacturing Engineering Qualification Specification Overview A qualification designed to cover the skills and knowledge of a wide variety
Stripping and rebuilding motorsport engines (pre-competition)
Unit 060 Stripping and rebuilding motorsport engines Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to re-build
This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.
NZQF NQ Ref 1416 Version 3 Page 1 of 20 National Certificate in Motor Industry (Automotive Specialist Engineering) (Level 4) with strands in Automotive Heating, Ventilation, and Air Conditioning; Automotive
Stripping and rebuilding motorsport vehicles (precompetition)
Unit 856 Stripping and rebuilding motorsport vehicles (precompetition) UAN: T/600/5970 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: This unit has been derived from national occupational
Heavy vehicle service and maintenance technician standard: Employer Occupational Brief
Heavy vehicle service and maintenance technician standard: Employer Occupational Brief July 2016 Competence expectations at gateways There are three gateway competency points in the bus and coach engineering
Bus and coach engineering technician standard: Employer Occupational Brief
Bus and coach engineering technician standard: Employer Occupational Brief July 2016 Competence expectations at gateways There are three gateway competency points in the bus and coach engineering technician
Level 2 NVQ Diploma in Specialist Installation Occupations (Construction)
Qualification Title: Level 2 NVQ Diploma in Specialist Installation Occupations (Construction) Pathway 1: Level 2 NVQ Diploma in Specialist Installation Occupations (Insulated Enclosures Industrial) Pathway
THIELE company profile
Bucket-Elevator Chains THIELE company profile The THIELE company The THIELE Company was founded more than 75 years ago and is now one of the world s foremost chain manufacturers. THIELE s product line
Electric. equipment. ICE Level 2. as; cal Installation. qualified. Page 1 of 5
Electric cal Installation Level 2 - International Competen nce: Engineering Construction (Red Card) OCCUPATION PROFILE ELECTRICAL FITTER The occupation of Electrical Fitter involves the installation, commissioning,
Liv-Elir d.o.o. Contact Info: Tel/Fax.: Mob.: Mail: REPAIR AND SERVICE / PRODUCTION
REPAIR AND SERVICE / PRODUCTION REPAIR AND SERVICE Asynchronous, synchronous and collector machines of low and high voltage: Production of coil insulation class B, F, H Production of coil for voltage level
50 years experience in offering tailor made solutions to suit every customer s need.
Digital Brochure 50 years experience in offering tailor made solutions to suit every customer s need. Mages Group was established in 1960 by Mr William Mages and has since grown to become one of the South
THE WARREN WORK TABLE
THE WARREN WORK TABLE Size - 24" x 30" x 36" Height is adjustable 30" to 36" Weight capacity - 800 lbs. Top - ⁵ ₁₆" HR Steel Frame - 2" x 2" x ¹ ₄" angle Shelf - 11 gauge HR Steel Wheels - Casters With
Siemens Centre of Excellence Course Plan
Siemens Skill Development Initiatives Industry Relevant Skill Development Program for Gujarat Siemens Centre of Excellence Course Plan Page 1 Table of Contents Labs in the Siemens COE... 3 Courses offered
ADVANCED TRAINING INSTITUTE, HYDERABAD PR04/F01
Revision: 01 LEARNING CONTENT Page 1 of 8 III COURSE CODE MTM-01 COURSE TITLE MACHINE TOOL MAINTENANCE V DURATION 02 Weeks On completion of the course, the learner will be able to understand various test
Electrical Maintenance
Electrical Maintenance Level 3 - International Competence: Engineering-Construction (Blue Card) OCCUPATION PROFILE ELECTRICAL MAINTENANCE PERSONNEL Electrical maintenance personnel are responsible for
Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 Aim This unit aims to extend learners understanding of pneumatic and hydraulic fluid power systems
OIL & GAS INDEX 1- CAPABILITIES 2- ENGINEERING SERVICES 3- PRODUCTS: 3b- SYSTEMS. 3a- MAXIMIZING TECHNOLOGY. 3c- INSTRUMENTATION
INDEX 1- CAPABILITIES 2- ENGINEERING SERVICES 3- PRODUCTS: 3a- MAXIMIZING TECHNOLOGY 3a.1- Oil & Gas HP Valves / Control Valves 3a.2- Oil & Gas Special flanges, pipes & accessories 3a.3- Custody Transfer
Industrial Robotics: Current and Emerging Technologies and Applications. Sang Choi, ABB US CRC Robotics CASE 2012 ABB USCRC - 1 -
Sang Choi, ABB US CRC Robotics CASE 2012 Industrial Robotics: Current and Emerging Technologies and Applications ABB USCRC - 1 - Contents Major drivers for industrial robots Current application areas Demands
Subcontracting TEC. Components & subassemblies for electric machines. Electric Components
Subcontracting Components & subassemblies for electric machines TEC Electric Components Complex solutions in outsourcing Independent producer of our own line and supplier of custom made products and services
Knowledge of diagnosis and rectification of light vehicle engine faults
Unit 157 Knowledge of diagnosis and rectification of light vehicle engine faults UAN: F/601/3733 Level: No Level Credit value: 6 GLH: 45 Relationship to NOS: This unit is linked to LV07 Diagnose and Rectify
Knowledge of Diagnosis and Rectification of Light Vehicle Engine Faults
Unit 157 Knowledge of Diagnosis and Rectification of Light Vehicle Engine Faults UAN: F/601/3733 Level: Level 3 Credit value: 6 GLH: 45 Relationship to NOS: This unit is linked to LV07 Diagnose and Rectify
Pearson Higher Nationals Recognition of Prior Learning (RPL)
earson Higher Nationals Recognition of rior Learning (RL) MAING DOCUMENT QCF earson BTEC Level 4 Higher National Certificate in Engineering unit content mapped to the Level 4 units available in the earson
John Deere Agricultural Equipment Technician A Guide to Course Content
John Deere Agricultural Equipment Technician A Guide to Course Content Note: Regular Agricultural Equipment Technician apprentices see AET guide to course content pamphlet. Agricultural Equipment Technicians
Bogie Information. Issue 1
Bogie Information Issue 1 William Cook Rail Bogie Information Issue 1: 16 March 2017 Copyright 2014-2017 William Cook Rail Ltd. All rights reserved. This document is protected by copyright and design right
Your partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making
Your partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making Picture on front page: By kind permission of Werk5 GmbH,
Qualification structure for the Edexcel Level 2 NVQ Certificate in Plant Operations (Construction) (QCF)
Qualification structure for the Edexcel Level 2 NVQ Certificate in Plant Operations (Construction) (QCF) With effect from January 2012 this version of the structure replaces all previously published versions.
4.1. Manufacturing field F2 Preformed and field coil windings
4.1 Manufacturing field F2 Preformed and field coil windings 4.1.2.2 Manufacturing field F2 - Preformed and field coil windings 4.1.2.2.1 Range of services preformed coils One of the most important areas
This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1445 Version 2 Page 1 of 33 National Certificate in Motor Industry (Automotive Heavy Engineering) (Level 3) with strands in Agricultural Equipment, Materials Handling Equipment, Plant and Equipment,
APPRENTICESHIP SCHEMES
APPRENTICESHIP SCHEMES COSWORTH FOUNDERS Keith Duckworth and Mike Costin WHO ARE WE? Since Cosworth was formed in 1958 by Mike Costin and Keith Duckworth, we have become the most successful independent
Introduction. Established as reliable and innovative tier 2 supplier
Coversheet Introduction Company founded in 2000 Established as reliable and innovative tier 2 supplier Product portfolio: Aircraft interior Hardware products: Latches, retainers and stowing devices Aircraft
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 and 3 Diploma in Auto Electrical and Mobile Electrical Competence (4270-62/63) October 2013 Version 2.1 Qualification at a glance Subject area City & Guilds number 4270 Age
Vehicle Systems and Technology
Unit 75: Vehicle Systems and Technology Unit code: D/601/1374 QCF level: 5 Credit value: 15 Aim This unit will develop learners understanding of the operating principles associated with advanced vehicle
MANUFACTURING OF PUMP SETS FOR AGRICULTURAL (SUBMERSIBLE)
Profile No.: 17 NIC Code: 28132 MANUFACTURING OF PUMP SETS FOR AGRICULTURAL (SUBMERSIBLE) 1. INTRODUCTION: Submersible Pump sets are the ones which are submerged in water to pump up lift the water from
Three-Phase Motors and Drives
Unit 63: Three-Phase Motors and Drives Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose K/600/7117 BTEC Nationals This unit aims to give learners knowledge of three-phase
Campbell County Gillette, Wyoming
Campbell County Gillette, Wyoming Job Classification Title: FLSA Status: Non-Exempt Job Type: 1926 1940 Pay Range/Band: 52/23 56/25 Class specifications are intended to present a descriptive list of the
DEPARTMENT OF PRODUCTION ENGINEERING. Established in 1983
DEPARTMENT OF PRODUCTION ENGINEERING Established in 1983 MILESTONES IN THE DEPARTMENT 1983 Production department started 1987 M.E (Manufacturing Tech.) course started 1993 First Ph.D. produced in the department
automotive engineering 2014/15
automotive engineering 2014/15 always the right course Contents Automotive Starting Grid...1 Introduction to Automotive Engineering Advanced Skills..1 City & Guilds 4290-11 Level 1 Diploma in Vehicle Maintenance
Edexcel BTEC Level 2 and Level 3 Diploma in Motorcycle Maintenance and Repair Principles (QCF)
Specification Edexcel BTEC Level 2 and Level 3 Diploma in Motorcycle Maintenance and Repair Principles (QCF) Edexcel BTEC Level 2 and Level 3 Diploma in Motorcycle Maintenance and Repair Competence (QCF)
Equipment available due to closure
Epec - Fabrication and Engineering Equipment available due to closure (Ends: 2017-02-15 14:00:00.0) Epec - Fabrication and Engineering Equipment available due to closure Lot 1 Renault Master CC LL 35 Dci
AFTER GAZETTING (WORKING DOCUMENT FOR A 3 YEAR PERIOD) DATE PAGE PARAGRAPH DESCRIPTION ORIGINATOR APPROVED
PART B-07 TITLE: SERVICE CONNECTIONS SPECIFICTION NO: B-07 INCEPTION DATE: AFTER GAZETTING (WORKING DOCUMENT FOR A 3 YEAR PERIOD) AMENDMENTS / REVISIONS DATE PAGE PARAGRAPH DESCRIPTION ORIGINATOR APPROVED
(Construction) Minimum credit to be achieved at, or above, the level of the qualification: 49
Qualification Title: Level 2 NVQ Diploma in Piling Operations (Construction) Pathway 1: Level 2 NVQ Diploma in Piling Operations (Piling Rig Operator) Pathway 2: Level 2 NVQ Diploma in Piling Operations
agriculture tanks for sprayers fuel tanks for tractors roofs mudguards hoppers for spreaders
agriculture tanks for sprayers fuel tanks for tractors roofs mudguards hoppers for spreaders factories ROTO is a global producer of high-quality plastic products from polyethylene, polypropylene, polyamide,
EXPERIENCED - RELIABLE - FAST. Wind power generators. permanently excited. General machine building. Lift motors. permanently excited
EXPERIENCED - RELIABLE - FAST permanently excited General machine building Lift motors permanently excited 1 Christian Partzsch Managing director If you want satisfied customers, then you need experienced
Focus Area Level Report Including Knowledge and Skills, and Performance Indicators
Including Knowledge and Skills, and PST 01. Use physical science principles and engineering applications with power, structural and technical systems to solve problems and improve performance. PST 01.01.
Packaging and spool types
Packaging and spool types Contents Home 471 Packaging Stick electrodes Rutile and low-hydrogen electrodes are packed in cardboard packs with polyethylene shrink wrapping. They are supplied in units of
National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans
NZQF NQ Ref 0413 Version 6 Page 1 of 13 National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans Level 4 Credits
Pearson Edexcel Level 2 NVQ Certificate in Plant Operations (Construction) (QCF) 601/6018/4
Amendment Notification May 2015 CITB, the Sector Skills Council (SSC) for Construction, in consultation with the industry, have changed the National Occupational Standards (NOS) so it is important we update
Large Composite Wind Turbine Blades
Large Composite Wind Turbine Blades IMAC 19 th March 2009 vestas.com What To Look Forward To Brief overview of the industry A look at Vestas and our current range Types of processes, Wet lay-up, Pre-preg,
machine tools for railways
machine tools for railways RAFAMET S.A. Comprehensive solutions, advanced technologies and cost efficient productivity now much more than ever before are obvious requirements that the right equipment supplier
NZQF NQ Ref 1421 Version 2 Page 1 of 39
NZQF NQ Ref 1421 Version 2 Page 1 of 39 National Certificate in Motor Industry (Automotive Electrical and Mechanical Engineering) (Level 3) with strands in Electrical and Electronics, Light Vehicle, Motorcycle,
Motor Vehicle Apprenticeship Programmes
Motor Vehicle Apprenticeship Programmes The Motor Vehicle Industry With over 20 million private cars on the road in addition to commercial vehicles, it is not surprising that over half a million people
Matt Morgan Assistant Superintendent of Support Services. Kristine Johnston Director of Purchasing. Date: January 12, 2017
To: Matt Morgan Assistant Superintendent of Support Services From: Kristine Johnston Director of Purchasing Date: January 12, 2017 Re: Career and Technology Equipment Repair Service Annual Contract #16-11-5037R
STAMPINGS QUALITY AT AN AFFORDABLE COST
QUALITY AT AN AFFORDABLE COST INTRODUCTION Crompton Greaves Ltd., the pioneer and leader in the Electrical Industry for last seven decades, manufactures its own requirement of Stampings & Laminations for
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE
National Certificate in Motor Industry (Automotive Machining)
NZQF NQ Ref 0371 Version 6 Page 1 of 11 National Certificate in Motor Industry (Automotive Machining) Level 4 Credits 167 This qualification has been reviewed. The last date to meet the requirements is
Mounting Body CHAPTER 9
CHAPTER 9 Mounting Body During the build of your car, you will need to trial fit the body numerous times. It is possible to construct a simple moveable rack that can lift the body and then move the body
Introduction. Established as reliable and innovative tier 2 supplier
Coversheet Introduction Company founded in 2000 Established as reliable and innovative tier 2 supplier Product portfolio: Aircraft interior Hardware products: Latches, retainers and stowing devices Aircraft
ROLLING SHUTTERS. Profile No.: 42 NIC Code: INTRODUCTION: 2. PRODUCT & ITS APPLICATION:
Profile No.: 42 NIC Code: 25111 ROLLING SHUTTERS 1. INTRODUCTION: A roller shutter, roller door or overhead sliding shutter panel is a type of door or window shutter consisting of many horizontal slats
QCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Drive a Taxi or Private Hire Vehicle in a Professional Manner K/602/6055 SQA Unit code FF97 66 History of changes Publication date: Version:
Marine Service Technology
Marine Service Technology I. Demonstrate general shop practices. Each number to the right refers to a single student/candidate (1-10). Place a check ( ) in the respective column for the appropriate student/candidate
Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING
HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,
COMPANY PROFILE 0045
0045 COMPANY PROFILE INTRODUCTION TO THE COMPANY THE MICROFINISH WAY Microfinish Valves Pvt. Ltd. is a privately owned and managed company specializing in industrial valves for energy, process, and natural
UNIFLEX. Flexible Solutions for the Universe... Hose & Tube Assemblies Fittings Adapters Fuel Injection Pipes Fabrication Sub Assemblies
Flexible Solutions for the Universe... Hose & Tube Assemblies Fittings Adapters Fuel Injection Pipes Fabrication Sub Assemblies Universal Flex ibles Pvt. Ltd. (), is an ISO/TS 16949-2009 certified company
Appendix C - Roll Over Bars Appendix D - Roll Cages
NATIONAL SOLOSPORT REGULATIONS AUTOSLALOM Appendix C - Roll Over Bars Appendix D - Roll Cages Effective January 1, 2018 ASN Canada FIA 481 North Service Road West, Suite A21, Oakville, Ontario, L6M 2V6
This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1420 Version 2 Page 1 of 33 National Certificate in Motor Industry (Vehicle Servicing) with strands in Brake and Clutch, Exhaust Systems, Radiator Repair, Steering and Suspension, Tyres, Underbody
Guideline No.: E-04(201610) E-04 GENERATORS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-04(201610) E-04 GENERATORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection
Conveyor Belt Specialist
Conveyor Belt Specialist Specialising in Conveyor & Modular Belting, we also offer a wide range of related products, from PVC Door Curtains to Motors & Gearboxes CONVEYOR BELTING MODULAR BELTING SPECIALIST
Motor Vehicle Body Repairer NOA (2005) Subtask to Unit Comparison
Motor Vehicle Body Repairer NOA (2005) Subtask to Unit Comparison Task 1 - Uses documentation. 1.01 Uses manufacturer s specifications and repair procedures. A4 Tools and Equipment E6 Body Integrity G1
Aircraft Philipp. For manufacturers of aircraft engines and gas turbines. Every flight a part of us.
Aircraft Philipp For manufacturers of aircraft engines and gas turbines Every flight a part of us. 2 Toni Liedl Rolf Philipp Timm Dinges Tilmann Rosch Heinz Bähr THE AIRCRAFT PHILIPP GROUP Who we are The
Occupations (Construction)
Qualification Title: Level 2 NVQ Diploma in Sub-structure Work Occupations (Construction) Pathway 1: Level 2 NVQ Diploma in Sub-structure Work Occupations (Underpinning Operations Excavated Underpinning)
We Bring innovations ALIVE! Page 1 of 12
CAPABILITIES & FACILITIES LIST WWW.LMC-CORP.COM Telephone: 920-713-4160 E-mail: machinery@lmc-corp.com WWW.LMC-CORP.COM 610 Baeten Road, Green Bay, WI 54304 Total square feet: Offices 20,000 Sq. Ft. Manufacturing
MANUFACTURING OF GEAR BOXES
Profile No.: 29 NIC Code: 29301 MANUFACTURING OF GEAR BOXES 1. INTRODUCTION: Gears play a prominent role in mechanical power transmission. A gear or cogwheel is a rotating machine part having cut teeth,
HIDAYATH. Hidayath Heavy Industry LLC. GROUP
HIDAYATH HIDAYATH GROUP Hidayath Heavy Industry LLC Oil & Gas Petrochemical & Refinery Power & Desalination Water Treatment Food & Beverages Pharmaceuticals Structural www.hidayath.com Company Profile
Sand & Gravel, Inc. Job Demands Analysis. Purpose of Activities:
Job Demands Analysis Sand & Gravel, Inc. Company: Thelen Sand & Gravel, Inc. Job Title: Maintenance / Welder Location: Maintenance Shop Classification: Regular Duty Purpose of Activities: The maintenance
VEHICLE COMPONENTS SUPPLY EXPERTS
VEHICLE COMPONENTS SUPPLY EXPERTS VEHICLE COMPONENTS We build and maintain the strong supply chain links which power the global automotive industry. API Engineering have more than 15 years of experience
This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1422 Version 2 Page 1 of 25 National Certificate in Motor Industry (Automotive Electrical and Mechanical Engineering) (Level 4) with strands in Electrical and Electronics, Light Vehicle, Motorcycle,
IMPORTANT INFORMATION ABOUT THIS APPLICATION
MotorSport NZ Inc 69 Hutt Road, Thorndon PO Box 3793, Wellington 6015 Ph: 04 815 8015 Fax: 04 472 9011 Web: motorsport.org.nz SAFETY CAGE / ROLLBAR HOMOLOGATION APPLICATION Technical Form T002 IMPORTANT
ype UP T Busplugs Low Voltage Switchboard Equipment
Busplugs Type UP Low Voltage Switchboard Equipment Publication UP 2013 Since product improvement is a continuing policy, we reserve the right to change specifications without notice. Contents Descriptive
Key Point: Hisun has a 30-year history
Founded in 1988, through a series of mergers and acquisitions, Chongqing Huansong Industries (Group) Co.,Ltd was founded at 2003, has 1,700 employees. The new facility, located in the Economic and technological
Teledyne Readco 100 Tonne Welding Positioner / Manipulator with Motorised Tilting & Rotating Table
LOT No: 1 TITLE Teledyne Readco 100 Tonne Welding Positioner / Manipulator with Motorised Tilting & Rotating Table 2 SAF Model 400B Welding Positioner / Manipulator with Motorised Tilting & Rotating Table
Custom Machines & ENGINEERED SYSTEMS
Custom Machines & ENGINEERED SYSTEMS Midwest Automation manufactures a full line of standard machines for the wood, composite and metal industries. However, we are often asked to apply our engineering
REF300. Inline wheel deflashing machine
REF300 Inline wheel deflashing machine en The REF300 removes flashes in order to ensure a smooth automatic wheel production flow. REF300 Inline wheel deflashing machine Continuously growing demands in
National Certificate in Motor Industry (Entry Skills) (Level 2) with strands in Automotive Electrical and Mechanical, and Collision Repair
NZQF NQ Ref 1252 Version 3 Page 1 of 12 National Certificate in Motor Industry (Entry Skills) (Level 2) with strands in Automotive Electrical and Mechanical, and Collision Repair Level 2 Credits 80 This
Reliance Electric Super RPM Large Variable Speed DC Motors: HP B500-B1600 Frame RPM
Reliance Electric Super RPM Large Variable Speed DC Motors: 75-4000 HP B500-B1600 Frame 400-2400 RPM Engineered To Meet The Toughest Industrial Requirements Reliance Electric DC motor technology is the
Diagnose and rectify faults in a motorcycle electronic ignition system
Page 1 of 5 Diagnose and rectify faults in a motorcycle electronic ignition system Level 4 Credits 4 Purpose This unit standard is for people in the motorcycle and automotive electrical repair industries.
An experienced diesel mechanic, well versed with all the latest equipment for repair and maintenance operations
Andrew Hicks CONTACT 15 Keasor Ct Laconia NH 03246 E-mail: hicks90@aol.com Phone: 603-581-5510 SUMMARY An experienced diesel mechanic, well versed with all the latest equipment for repair and maintenance
SINCE Sheet metal working machines
PRESS BRAKES SINCE 1973 Sheet metal working machines VIMERCATI 100% MADE IN ITALY QUALITY F.lli Vimercati s.n.c. was founded in 1973 as a business venture in Brianza, north of Milan, on the initiative
Exhaust and Metal Products
EMISSION TECHNOLOG IES Exhaust Group Exhaust and Metal Products Full Range of Products from the Frame to the Tail Pipe www.catalyticcombustion.com 888-285-5940 Welcome to Catalytic Combustion Corporation,
Performance Service Centres. ABB Performance Services. Power and productivity for a better world TM
Performance Service Centres ABB Performance Services Power and productivity for a better world TM The ABB difference ABB, a global leader in power and automation technologies, has five Performance Service
TO Approved for public release, distribution unlimited
UNCLASSIFIED AD NUMBER AD846359 NEW LIMITATION CHANGE TO Approved for public release, distribution unlimited FROM Distribution authorized to U.S. Gov't. agencies and their contractors; Administrative/Operational
LIST OF MACHINERY MACHINES FOR PLATEFORMING AND PROFILEFORMING pc CNC flame cutting machine MESSER OMNIMAT L 5600 size of table:
LIST OF MACHINERY MACHINES FOR PLATEFORMING AND PROFILEFORMING 1. 1 pc CNC flame cutting machine type ESAB, EXA 4500 size of table: number of cutting heads: 3900x13500 mm 4 pcs 200 mm 2. 1 pc CNC flame
2016 Die Design and Simulation Software Experience Presentation
2016 Die Design and Simulation Software Experience Presentation About US: Distinctive Machine Corporation is dedicated to getting the job done right and on time. Founded in 1991, we have a reputation for
TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING
TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING Page DEFINITIONS...7-1 SAFEGUARDS...7-1 GUARDING...7-2 PULLEYS, BELTS AND BELT-SHIFTERS...7-3 CONTROLS...7-3 FLYWHEELS...7-3 GRINDING WHEELS...7-3
MJB. Model. Up to kva. Power. Up to V. Voltages. Frame 160 ± 900. Pole 4, 6, 8, 10 and 12. (over contact MM) Cooling IC 01
MJB Model Power Voltages MJB Up to 6.500 kva Up to 1.000 V Frame 160 ± 900 Pole 4, 6, 8, 10 and 12 Cooling IC 01 (over contact MM) IP Enclosure Main Applications Sector IP 23. Available up to IP 44 with
CO P P E R C A B LES A N D C O N N E C TO R S (P TY)
CCC Copper Cables & Connectors (Pty) Ltd, established in 1990, specialises in design and manufacture or repair of Water-Cooled Furnace Cables, Air-Cooled Furnace Cables, Water-Cooled Resistance Welding
SCT OTA Service Pyrites Way Suite A - Rancho Cordova, CA
SCT OTA Service Over the years Optic Wave Labs has performed a variety of repairs and modifications to the major brands of Schmidt Cassegrain and other Catadioptric telescopes. We now offer standard services
ATS CHEM EQUIPMENTS PVT. LTD.,
ATS CHEM EQUIPMENTS PVT. LTD., AN ISO 9001:2015 CERTIFIED COMPANY Unit 1, C 27, SIDCO Industrial Estate, Hosur 635 126, Tamil Nadu, India. Phone No: 04344 276731, Mail ID: atschem@gmail.com Unit II, 16
Aircraft Hydraulic Systems Design and Performance
Unit T25: Aircraft Hydraulic Systems Design and Performance Unit code: T/504/0126 QCF level: 6 Credit value: 15 Aim The aim of this unit is to give learners an understanding of the principles that underpin
TM MANUFACTURERS
TM200 1.1 MANUFACTURERS A. Acceptable Manufacturer: Raynor, which is located at: 1101 East River Rd. P. O. Box 448 ; Dixon, IL 61021-0448; Toll Free Tel: 800-4-RAYNOR; Tel: 815-288-1431; Fax: 888-598-4790;