Access Equipment. Contents

Transcription

1 MATERIALS HANDLING PRODUCTS 2017/18 Tel:

2 Contents Kick Steps Handy Steps Light Duty Folding Steps Aluminium Steps Combi Ladders Glass Fibre Steps 3 Way Ladders Extension Ladders Telescopic Ladders Fort Handy Steps Stainless Steel Steps Fort Mobile Steps Fort Warehouse Steps Podium Steps Work s Towers Fork Lift Cages 424 & & to to & to & to to to to to

3 34.95 Plastic Kick Steps Available as a standard version or as a model which is & approved to the recognised European GS standard Manufactured from high quality plastic & rubber for safety & durability Snap-lock for quick assembly Mounted on 3 sprung loaded polypropylene castors which retract when weight is applied Kick Steps GA008Z 150 evenly distributed 3 day COLOUR OPTIONS Red Blue Black Grey specify when ordering GA008Z i Information IDEAL FOR THOSE HARD TO REACH PLACES KA007Z 424 Description Loaded Unloaded Base Dia. mm Top Dia. mm (each) 1+ (each) 3+ Standard 2 KA007Z GS Approved 2 GA008Z

4 Steel Kick Steps 3 day 150 evenly distributed Available as a standard version or as a model which is & approved to the recognised European GS standard Manufactured from quality steel & rubber for safety & durability Snap-lock for quick assembly Mounted on 3 sprung loaded polypropylene castors which retract when weight is applied COLOUR OPTIONS Red Green Blue Black Grey Yellow specify when ordering GA009Z Kick Steps GA009Z KA004Z Description Loaded Unloaded Base Dia. mm Top Dia. mm (each) 1+ (each) 3+ Standard 5 KA004Z GS Approved 5 GA009Z

5 Plastic Step Stool Folding Aluminium Handy Steps HE400Z Handy carry hole 3 day 150 evenly distributed Handy Steps HE400Z Manufactured from high quality plastic Lightweight yet durable 2 step unit Large anti-slip platform & feet L x W x H mm 130 evenly distributed 3 day 470 x 510 x HE400Z Plastic Handy Steps HPE03Z HPE04Z 260 evenly distributed FS369Z No of - Open - Folded x 450 x x 450 x FS253Z x 480 x x 480 x FS369Z Plastic Step-up FS253Z Comply to EN Strong & sturdy folding aluminum steps Large (405W x 242D mm) durable platform for safe & comfortable standing Ideal for use in many environments This versatile nestable step is from injection moulded plastic complete with non-slip feet height: 240mm 7 day 426 HPE01Z No of HPE02Z WHERE HIGHLIGHTED, RED, BLUE OR YELLOW ONLY Tested to BS EN 14183:2003 Manufactured from tough, medium density polyethylene & resistant to most chemicals Ideal for wash down applications Fitted with anti-slip strips on the treads specify when ordering COLOUR OPTIONS Red Blue Yellow Green HPE05Z x 485 x HPE01Z x 475 x HPE02Z x 440 x HPE03Z x 490 x HPE04Z with Handrail 1620 x 490 x HPE05Z day Size W x D mm Overall Size mm HS501Z i COLOUR OPTIONS Grey Black specify when ordering Information EASY TO STACK & STORE 1 Off (each) x x HS501Z

6 Steel Step-ups Comply to EN standard These nestable steps are constructed from tubular steel & come complete with grooved plastic feet size: 380W x 260D mm Ribbed rubber mat platforms Step-A-Trucks Comply to EN-131 standard Versatile - neat & compact Large toe plate & wide step treads Load capacity: as sack truck - 60 & as step unit Multi purpose, simple & easy to convert from step to sack truck When in sack truck mode they are mobile on two 100mm wheels FMS83Y as Sack Truck HJS01Z W x D mm 150 evenly distributed 3 day x HJS01Z x HJS02Z day NON SLIP PLASTIC TREADS HJS02Z EASY TO USE FOAM RUBBER HANDLE Step-Ups & Step-A-Trucks FOLD AWAY WHEELS FMS82Y as Step Unit FMS83Y as Step Unit Easy to move into position W x D x H mm Folded as Sack Truck as Step Unit 460 x 70 x x 90 x x 490 x x 450 x x 530 x x 735 x 1190 Sack Truck Toe Plate Step Tread Size 1 Off (each) FMS82Y x 280 mm 375 x 210 mm FMS83Y

7 Folding Steps Folding Steps FS203Z FS202Z 3 day FS204Z Tubular steel, non-slip treads & plastic feet Folds down flat for easy compact storage Tread size: 300W x 200Dmm No. of Height of top tread when open when folded Wt x 410 x x 410 x 70 4 FS202Z x 410 x x 410 x 70 6 FS203Z x 410 x x 410 x 70 8 FS204Z day 3 day FJS64Z FCI02Z Folding Steps with High Back Comply to EN standard High safety rail, non-slip treads & feet Tread size: 380W x 260Dmm No. Height of of top tread mm 428 FJS63Z when open when folded Wt FJS62Z x 520 x x 520 x FJS62Z x 520 x x 520 x FJS63Z x 520 x x 520 x FJS64Z Chrome Plated Folding Steps Comply to EN standard Chrome plated tubular steel construction High safety rail, non-slip treads & plastic feet No. Height of of top tread mm FCI03Z when open when folded Wt x 480 x x 480 x FCI02Z x 540 x x 540 x FCI03Z 82.75

8 Folding Steps with Foam Handle Standard version & units which are & approved to the recognised European GS standard. Both ranges comply to EN standard Tubular steel construction, fitted with non-slip treads, non-slip feet & foam covered handle, giving a comfortable backing when used as a seat Tread size: 380W x 260Dmm FJS72Z/73Z: subject to availability GS402Z, GS403Z & GS404Z 3 day FJS73Z GS403Z FJS72Z FJS72Z GS402Z GS402Z, GS403Z & GS404Z Folding Steps GS404Z Description No. of Colour Height of top tread mm - Open - Folded Standard 2 Grey with Blue Foam Handle x 470 x x 470 x 90 4 FJS72Z Standard 3 Grey with Blue Foam Handle x 470 x x 470 x 90 9 FJS73Z GS Approved 2 White with Black Foam Handle x 450 x x 450 x 90 4 GS402Z GS Approved 3 White with Black Foam Handle x 460 x x 460 x 90 6 GS403Z GS Approved 4 White with Black Foam Handle x 500 x x 500 x 90 8 GS404Z

9 Folding Steps with Yellow Tool Tray Comply to EN standard Large versatile tool tray & a useful tool holder handle 4 x large anti-slip feet Tool Tray Folding Steps Safety Tread Lock Mechanism FJY02Z 150 evenly distributed 3 day Height of Top Tread mm - In Use - Folded x 536 x x 536 x FJY02Z x 536 x x 536 x FJY03Z x 536 x x 536 x FJY04Z FJY03Z Folding Steps with Tool Tray Aluminium Folding Steps 150 evenly distributed Comply to EN-131 standard Large versatile tool tray & foam handle for your comfort 4 x large anti-slip feet Plat. size: 374L x 313D mm Top tread height: 500mm Subject to availability Large Tool Tray Comply to EN-131 standard Aluminium serrated treads & anti-slip rubber feet Top tool tray for holding tools & fittings Subject to availability Tool Tray 3 day Safety Tread Lock ALI35Z FWS02Z 3 day In Use Folded Wt x 535 x x 535 x 75 7 FWS02Z Height to top Tread mm O/A Size - In Use O/A Height Folded Wt x 450 x mm 4.5 ALI33Z x 480 x mm 5.5 ALI34Z x 510 x mm 7 ALI35Z x 540 x mm 8 ALI36Z

10 Easy Slope Aluminium Folding Leader Steps Aluminium folding steps are ideal for use in offices, storerooms, warehouses etc. Certified to EN standard Large anti-slip rubber treads (360W x 205Dmm) & high handrail offer increased safety during use Tilt & pull wheels for easy movement without lifting Easy slope incline Folded size: only 120mm deep 3 day Tool Tray - on 3 & 4 tread models AFGS4Z i AFGS3Z Information AFGS3Z ROBUST & STURDY AFGS2Z - Tilt & Pull AFGS2Z AFGS4Z Folding Steps AFGS2Z AFGS2Z - Folded Description - In Use Overall Height when Folded mm 2 Tread with ribbed rubber treads x 520 x AFGS2Z Tread with ribbed rubber treads x 550 x AFGS3Z Tread with ribbed rubber treads x 580 x AFGS4Z

11 Aluminium Folding Steps Comply to EN-131 standard Distance between the platform & top handrail is 600mm providing safety at high levels 7 day i Information Aluminium Folding Steps FOLDABLE UNITS FOR COMPACT STORAGE ALR04Z ALR05Z ALR06Z ALR07Z - In Use - Folded x 420 x x 420 x ALR03Z x 490 x x 490 x ALR04Z x 470 x x 470 x ALR05Z x 490 x x 490 x ALR06Z x 520 x x 520 x ALR07Z x 600 x x 600 x ALR08Z Aluminium Folding Step Aluminium Folding Step Tool tray, ideal for all your tools & fittings height of 860mm Subject to availability 3 day ONLY Large red polypropylene handle & tool tray height of 515mm Subject to availability 3 day ONLY Safety Tread Locking Mechanism ALR13Z AJL02Z Folded Size x 500 x x 500 x ALR13Z Folded Size x 568 x x 568 x AJL02Z

12 Double Decker Comply to EN-131 Standard Integral toolholder, bucket hook & screwtray A quality professional aluminium stepladder, light enough to facilitate easy movement & transportation The aluminium platform features a red safety strip - indicator for maximum recommended step height & protective edge to prevent cuts & grazes Patented large double step underneath the platform for safe & comfortable standing The unit comes complete with heavy-duty sturdy rubber anti-slip feet to make this a superior, professional, stepladder 7 day Height O/A Size - In Use Folded Wt TOOL TRAY & BUCKET HOOK 3 616mm 1244 x 470 x ALT mm 1461 x 496 x ALT mm 1677 x 525 x ALT mm 1893 x 552 x ALT mm 2110 x 580 x ALT mm 2326 x 607 x ALT Taurus TGB 10YR 5YR UNIQUE DOUBLE STEP & RUBBER PLATFORM STRIP FOR EXTRA COMFORT Tool Tray ALT day Comply to EN-131 standard Integral tool tray in the guardrail Large anti-slip feet provide extra strength Benefit from a black powder coated finish, which keeps your hands warm & clean The double box section treads are considerably larger & thicker than on traditional products. Designed to give maximum strength, durability & total reliability (see image shown below) size: 330W x 250Dmm Subject to availability Aluminium Folding Steps Double Locking Mechanism ALT Height mm - In Use Overall Height when folded mm x 470 x ALT x 500 x ALT x 560 x ALT x 720 x ALT

13 Aluminium Library Steps Manufactured from industrial strength aluminium Non-slip treads & a large platform provide a safe working area Available as a double sided step unit - call for details size: 460D x 415W mm Aluminium Folding Steps Climb-It i Information STRAIGHT BACKED FOR CLOSER ACCESS ALS04Z ALS15Z Aluminium Warehouse Steps Units without Handrails Units with Handrails W x D mm x ALS03Z ALS13Z x ALS04Z ALS14Z x ALS05Z ALS15Z Comply to EN-131 standard Wheels at the back of the unit make this range of steps easy to manoeuvre Constructed from aluminium with heavy duty back supports & side handrails 8 step units & above are sent folded for - easy to erect Climb-It i Information IDEAL FOR MANY APPLICATIONS & INDUSTRIES ALW05Z Open Height to mm ALW04Z ALW05Z ALW06Z ALW07Z ALW08Z ALW10Z ALW12Z ALW14Z ALW14Z

14 Climb-It Aluminium Trade Stepladders Certified to BS2037 Class 1 Unique strengthening beam incorporated into non-slip treads Rubber feet & aluminium side arms help prevent slips & twists as there are no tapes or flimsy arms to break Lightweight & easy to carry BS2037 Class 1 APS04Z ATS04Z Open Closed APS08Z Without Handrails Aluminium Swingback Steps (EN-131 & BS2037 Class 1) With Handrails ATS03Z ATS13Z ATS04Z ATS14Z ATS05Z ATS15Z ATS06Z ATS16Z ATS07Z ATS17Z ATS08Z ATS18Z ATS10Z ATS110Z ATS12Z ATS112Z Aluminium Steps (BS2037 Class 1) Information APS03Z APS13Z APS04Z APS14Z APS05Z APS15Z APS06Z APS16Z APS07Z APS17Z APS08Z APS18Z APS10Z APS110Z APS12Z APS112Z i IDEAL FOR MAINTENANCE APPLICATIONS 435 Aluminium Steps

15 Regina Special Comply to EN-131 standard A high quality professional aluminium stepladder complete with large safe hand rails Benefits from sturdy deep treads welded to ensure maximum strength & longevity of performance Integral tool tray in the guardrail, which enables safe storage of tools & materials when in use Heavy-duty non-slip sturdy feet size: 280W x 255Dmm Aluminium Folding Steps SV-REGSP YR 7 day Tool Tray SV-REGSP-5 Height mm - In Use Overall Height when folded mm Professional Aluminium Folding Steps x 490 x SV-REGSP x 510 x SV-REGSP x 570 x SV-REGSP x 620 x SV-REGSP x 670 x SV-REGSP day Comply to EN-131 standard Large working platform - 275W x 400Dmm Deep non-slip aluminium treads These units have an extra large standing platform, twin handrails, handy work tray & high support rail Distance from platform to top hand rail: 750mm High Support Rail Tool Tray Large AFA04Z 436 AFA06Z - In Use Overall Height when folded x 420 x mm 4.5 AFA02Z x 445 x mm 5 AFA03Z x 465 x mm 6 AFA04Z x 490 x mm 6.5 AFA05Z x 515 x mm 7.5 AFA06Z x 535 x mm 9 AFA07Z

16 Taurus TME Comply to EN-131 standard Enclosed hinge system provides extra stability & allows closure & storage in restricted space Large handrails & 850mm guardrails for extra safety The wheels allow easy movement around warehousing Integral tool tray in the guardrail enabling safe storage of tools & materials when in use size: 330W x 250Dmm Height mm Tilt & Push Handles - In Use PROFILE OF DOUBLE TREAD SECTION designed to give maximum strength, durability & total reliability Overall Height when folded mm 7 day x 620 x ALT x 650 x ALT x 710 x ALT x 770 x ALT Folded 10YR Vera SV-VERA ALT ALT Comply to EN-131 standard Large platform size: 450 x 500mm Integral tool tray in the guardrail Welded ribbed aluminium, this quality folding warehouse stepladder is comfortable, sturdy & includes a large platform, which allows safe work at height Equipped with two reinforcing arms, which prevent sudden unwanted opening or closing & are used to move the ladder via two 125mm rubber wheels Tool Tray 5YR Aluminium Folding Steps 7 day SV-VERA-6 Height mm - In Use Overall Height when folded mm x 700 x SV-VERA x 740 x SV-VERA x 780 x SV-VERA x 820 x SV-VERA

17 Aluminium Wide Steps Certified to BS2037 Class 1 Wheels at the back of the unit make this range of steps easy to manoeuvre The unit incorporates a safety chain at the front of the platform for increased safety size: 400D x 600W mm i Information Aluminium Steps Open IDEAL FOR MANY APPLICATIONS & INDUSTRIES Closed ALP04Z ALP02Z ALP03Z ALP04Z ALP05Z ALP06Z ALP07Z ALP08Z Double Sided Picking Steps Comply to EN-131 standard Ideal for a wide variety of environments Double sided for good access 4 x 100mm castors fitted either side of the step for greater manoeuvrability This unit incorporates a double handrail either side of the unit as well as a guardrail for optimum safety Subject to availability i Information IDEAL FOR ACCESS TO YOUR SHELVING SV-DCS006 Folded 7 day 438 SV-DCS006 (6 tread unit available on enquiry) x 468 x SV-DCS x 545 x SV-DCS x 570 x SV-DCS x 593 x SV-DCS

18 Work s Folds flat for easy moving & storage - opened in one movement Complete with 2 tool trays - upper tray with storage compartments & a lower paint tray - 25 weight capacity each. Also comes complete with an S-shape pail hook Complete with guardrails & safety chains for your safety 5, 6 & 7 treads come with 2 stabilisers which are easy to set up & fold thanks to the spring loaded lock. They can also be folded up next to the unit for working in reduced spaces Mobile on 2 x 100mm wheels 80mm deep non-slip treads 250mm depth when folded (320mm for the 5, 6 & 7 treads) 400 x 500mm platform size Complies to WAHR PL0502 Complete with 2 tool trays & an S-shape pail hook 5YR 3 day PL1205 Folded Steps Height Size W x D mm Width with Stabilisers Folded Adjustable Height Telescopic Work s 2 500mm 750 x PL mm 750 x PL mm 750 x PL mm 620 x PL mm 620 x PL mm 620 x PL Folds flat for easy moving & storage - opened in one movement Complete with 2 tool trays - upper tray with storage compartments & a lower paint tray - 25 weight capacity each. Also comes complete with an S-shape pail hook Complete with guardrails & safety chains for your safety. Also complete with 2 stabilisers which are easy to set up & fold thanks to the spring loaded lock. They can also be folded up next to the unit for working in reduced spaces Mobile on 2 x 100mm wheels 80mm deep non-slip treads 420mm depth when folded 400 x 500mm platform size Adjustable to enable working on steps/staircases Complies to WAHR PL AP0835 Folded AP day 5YR AP1047 No of Plat. Heights Heights mm Width with Stabilisers Folded 3 to /1060/ /2140/ AP to /1320/1580/ /2380/2540/ AP to /1790/2050/ /2670/2860/ AP

19 Multi Purpose Ladders PL4X3Z Comply to EN-131 standard Can be used as a stepladder with base stabiliser, free standing extension ladder & as a platform ladder Complete with a removable platform (PL4X3Z only) Complete with stabilisers for extra stability Simple click lock hinge system Aluminium Folding Steps PL4X3Z in Position PL4X3Z Extended PL4X3Z PL4X3Z Extended PL4X3Z Folded Rungs Stepladder Extended Length mm Telescopic Ladder System Comply to EN-131 standard Adjustable telescopic sections with simple click lock hinge system Can be used as a stepladder, stairwell ladder & extension ladder Non-slip feet & splayed base give extra stability 4 x 3 Steps PL4X3Z x 4 Steps PL4X4Z TL4X4Z Folded TL4X4Z in Stairwell Position TL4X3Z Extended 440 TL4X4Z Rungs Stepladder Extended Length mm 4 x 3 Steps 1020 to to TL4X3Z x 4 Steps 1030 to to TL4X4Z

20 3 Way Combination Ladder Certified to BS2037 Class 1 Can be used as a stepladder with base stabiliser, free standing extension ladder & as a stairwell ladder Light, easy to use, store & transport Stabiliser bar & secure locking hinge for added support & safety WCL03Z Closed Length mm WCL03Z in Stairwell Position Stepladder Extended Length mm WCL03Z WCL05Z WCL03Z Extended Ladder 5 Way Combination Ladder WCL03Z Stepladder Comply to EN-131 standard Combines 2 single ladders, extension ladder, stepladder, work platform & stairwell platform Complete with large non-slip platform & handrail for increased safety WCL05Z in Work Position WCL05Z in Stairwell Position Combination Ladders WCL05Z Stepladder No of Rungs Base to mm Closed Stepladder WCL05Z Single Ladders Extended Length mm WCL05Z Extended Ladder 2 x WCL05Z

21 Glass Fibre Folding Steps Comply to EN-131 standard Fitted with serrated aluminium treads (standard glass fibre folding steps only) & anti-slip rubber feet Integral tool tray for holding tools GFJ0 range is subject to availability Standard Glass Fibre Folding Step Tool Tray Glass Fibre Steps GFJ05Z GFJ07Z i Information INSULATED UP TO 30,000 VOLTS 7 day GFJN57Z Standard Glass Fibre Folding Steps - Insulated to 10,000 volts - In Use Open Premier Glass Fibre Folding Steps - Insulated to 30,000 volts Closed x 450 x GFJ02Z x 455 x GFJ03Z GFJN53Z x 485 x GFJ04Z GFJN54Z x 520 x GFJ05Z GFJN55Z x 585 x GFJ07Z GFJN57Z GFJN59Z Glass Fibre Folding Steps Comply to EN-131 standard Lightweight steps with high safety rail providing added safety when working at high levels Aluminium treads & top working platform, anti-slip rubber feet & a top tool tray for holding tools & fittings height: 1185mm Subject to availability i Information INSULATED TO 10,000 VOLTS Premier Glass Fibre Folding Steps Comply to EN-131 standard Lightweight steps with high safety rail providing added safety when working at high levels Aluminium treads & top working platform, anti-slip rubber feet & a blue top tool tray for holding tools & fittings (GFPL12Z is a black tool tray) i Information INSULATED TO 30,000 VOLTS 7 day GFPN506Z 7 day GFPL12Z 442 GFP05Z - In Use Tool Tray x 560 x GFP05Z Open Closed GFPN503Z GFPN504Z GFPN505Z GFPN506Z GFPN507Z GFPN508Z GFPN510Z GFPL12Z

22 Glass Fibre Folding Steps with Large Large working platform with handrails Comply to EN-131 standard Space between rungs: 300mm Fitted with serrated aluminium treads & anti-slip rubber feet size: 400W x 575D mm Handles are supplied loose for easy assembly LARGE DOUBLE HANDRAILS LARGE WORKING PLATFORM 3 day FJG03Z Glass Fibre Wide Steps Certified to BS EN-131 Manufactured from a glass fibre frame with aluminium treads Wheels at the back of the unit make this range of steps easy to manoeuvre The unit incorporates a safety chain at the front of the platform for increased safety size: 400W x 600D mm i Information INSULATED TO 25,000 VOLTS i i Height of Top Tread mm Information INSULATED TO 10,000 VOLTS Information IDEAL FOR ACCESS & MAINTENANCE APPLICATIONS - In Use - Folded FJG04Z x 642 x x 642 x FJG03Z x 679 x x 679 x FJG04Z x 716 x x 716 x FJG05Z SAFETY CHAIN Glass Fibre Steps GLF26Z Open Closed GLF22Z GLF23Z GLF24Z GLF25Z GLF26Z GLF27Z GLF28Z GLF24Z 443

23 Glass Fibre Ladder STABILISER BAR Comply to EN-131 standard Available for use as a stepladder, extension ladder & freestanding extension ladder. Unique sliding mechanism makes conversion between modes easy Manufactured from a glass fibre frame with aluminium rungs & nylon support strap Non-slip rungs for comfort & safety Wide base & heavy duty feet for stability & grip Insulated to 10,000 volts Ideal for use in an electrical environment 3 Way Ladders GFL07Z i Information INSULATED TO 10,000 VOLTS GFL07Z V3 - Glass Fibre Ladder Rungs Folded Stepladder Extension Ladder Length mm GFL06Z GFL07Z Comply to EN-131 standard Locking mechanism to ensure increased safety Roller wheels for ease of movement on a building/against a wall Tested to 100,000V - far beyond most products Available for use as a stepladder, extension ladder or freestanding extension ladder i Information INSULATED TO 100,000 VOLTS 5YR WALL WHEELS 7 day STABILISER BAR Rungs 444 Closed Length mm Extended Length mm Overall Height in aa position mm 3 x SV-V3-3x x SV-V3-3x SV-V3-3x8

24 Professional Combination Ladder Certified to BS EN-131 This combination ladder can be used as a stepladder with base stabiliser, free standing combination ladder & as a 3 part extension ladder Large comfortable rungs for comfort, strong box section stiles, large stabiliser bar & solid sidearms increase safety & stability Rungs Closed Length mm 3 Way Aluminum Steps Comply to EN-131 Standard Aluminium combination ladders which can be used as a stepladder, extension ladder or freestanding extension ladder, as well as for use on stairwells Euro 3 - features wall wheels & a base stabiliser Luxe 3 - features wall wheels as standard & a unique patented adjustable stabiliser Subject to availability 7 day 5YR PCL306 in A frame position Extended Length mm Overall Height in aa position mm PCL306 Extended 3 x PCL x PCL x PCL Wall Wheels Wall Wheels PCL306 UNIQUE PATENTED STABILISER 3 Way Aluminium Ladders SV-EUR3-3x8 Rungs Closed Length mm Extended Length mm Overall Height in aa position mm Euro 3-3 Way Aluminium Ladder 3 x SV-EUR3-3x x SV-EUR3-3x x SV-EUR3-3x Luxe 3-3 Way Aluminium Ladder with Unique Patented Stabiliser SV-LX SV-LX SV-LX SV-LX SV-LX

25 Ladder Stand-offs Ladder Clamp Extension Ladders & Ladder Accessories Makes access for guttering & window maintenance so much easier Quick & easy to fit to most ladder types ASO25Z & LASO03 are for use on flat surfaces & the VSO24Z is for building corners as well ASO25Z LASO03 VS024Z Secure ladders to your roof rack (padlocks not included) Detachable - quick & easy to fit to most ladder types & roof racks LALC Universal Roof Hook Turns an extension ladder into a roof ladder Detachable - quick & easy to fit to most ladder types Wheels help move the ladder up the roof Clearance V Type Ladder Stand Off mm 2.4 VSO24Z Adjustable Ladder Stand Off mm 2.5 ASO25Z Universal Ladder Stand Off LASO Extension Ladders URH28Z Class 1 Extension Ladders Certified to BS EN-131 Large comfortable D shaped rungs Rigid extruded box section stiles for added strength Secure, non-slip grip with all round PVC moulded feet Certified to BS2037 Class Large comfortable D shaped rungs & solid moulded rubber feet Easy to handle yet incredibly rigid Rungs 446 Closed Extended Two Section Push Up Ladders ELL ELL ELL ELL ELL ELL ELL Three Section Push Up Ladders ELL ELL ELL , ELL Rungs Closed Extended Two Section Push Up Ladders CEL CEL CEL CEL CEL CEL Three Section Push Up Ladders CEL CEL CEL CEL , CEL

26 Telescopic Ladders Certified to EN-131 standard To open the unit lift from any step dependent on the height you are trying to achieve. The step can be adjusted all in one go or step by step to suit your requirements Folds quickly & easily for compact storage Controlled retraction to guard against trapped fingers One time release locking mechanism Manufactured in strong aluminium i Information CONTROLLED RETRACTION TO GUARD AGAINST TRAPPED FINGERS day NEW Telescopic Ladders Certified to EN-131 standard To open the unit lift the top rung until the unit clicks into place. Then repeat until you have achieved your required height Fold quickly & easily for compact storage. Simply push the buttons on either side of each rung to close Manufactured in lightweight yet strong aluminium Subject to availability Folds quickly & easily for compact storage. Simply push the buttons to close. The unit has a flange in the legs which restricts air flow and therefore gives controlled retraction to compact the unit smoothly from 3870mm extended height to 900mm closed height GXF13Z Carried Description GXF14Z Bag Rungs Extended Closed GXF13Z In Use Ladder GXF13Z Rung Ladder with Bag GXF14Z Simply push the buttons together to close Telescopic Ladders 7 day GXF26Z Folded Extended Closed Rungs Length mm Length mm GXF26Z GXF38Z GXF26Z 447

27 FORT SECURE ACCESS... for Safety, Strength & Durability ALL FORT SECURE ACCESS STEPS ARE... 1 Access Information 2...TRIPLE WELDED FOR MAXIMUM SAFETY, ON ALL TREADS...POWDER COATED FOR A DURABLE FINISH, EVEN ON THE LARGEST 18 TREAD STEPS 3...TESTED IN EXCESS OF THE LOAD CAPACITY 4...HEAVY DUTY SHRINK WRAPPED FOR PROTECTION EACH STEP IS INDIVIDUALLY CHECKED BEFORE DESPATCH. 448

28 The Work at Height Regulations 2005 These regulations apply to all work at height, in any place, where if precautions were not taken a person could fall down & injure themselves ARE YOUR WAREHOUSE STEPS CERTIFIED TO EN-131? Following the introduction of part 7 to the EN131 standard there is growing interest in certified warehouse steps. Heavy duty warehouse steps were previously covered within the European BGI637 standard and this standard was effectively incorporated into the scope of EN131-7 in September This, together with the previous levels of parts 1 to 3 of the EN131 standard, has defined criteria for design, test and certification across a wide spectrum of step units. We have a vast range of UK steps which are certified to the EN131 standard and the EN14183 standard and users are becoming increasingly interested in using products that have the benefit of conformance and certification. No longer can manufacturers & suppliers say that there is no British standard. We have been the only UK manufacturer of Safety Steps which are accredited to the European GS & DGUV Standard for many years and elements of these relevant standards have been incorporated into our design and test criteria for all of our UK steps. This is so we can ensure that the necessary levels of product strength, durability and stability are achieved. Our manufacturing processes all take place under controlled conditions conforming to ISO:9001 ensuring product conformity is verified. i Access Information So... what do you need to do? CARRY OUT A RISK ASSESSMENT - If access from a fixed point for more than 30 minutes is required a ladder can not be used - consider a Mobile Step, Aluminium or an Access Tower SELECT THE RIGHT EQUIPMENT - Don t make do to save money & time. Inappropriate selection or usage of access equipment could lead to a fine TRAIN THOSE DOING THE WORK - Make sure they know how to use the equipment properly - including erecting / folding equipment if necessary INSPECT & MAINTAIN - Ensure equipment is regularly inspected. It is recommended that Step Ladders & Ladders used daily have a written, recorded inspection by a person in authority every 3 months. Damaged equipment must be repaired or taken out of use & replaced. NB: Step Ladders & Ladders will fail the regulations with cracked, split or missing feet, tips, dented rungs or missing rivets. SUPERVISE & MONITOR - Check the work is being carried out as planned, & suitable equipment is being used. Remember that everybody is covered by the WAHR - employers, employees, self-employed & all sub-contracted & managed trades. CAN T FIND WHAT YOU ARE LOOKING FOR......ALL FORT SECURE ACCESS STEPS CAN BE DESIGNED & MANUFACTURED TO YOUR EXACT REQUIREMENTS. LOOK FOR THE FORT SECURE ACCESS SYMBOLS So... what do you need to do? Choose the design of step you require. Contact us with the changes you would like making e.g. bigger platform or treads, higher platform height etc. We will design & price the unit to your specifications (all steps will be designed to ensure safe operation) WE HAVE THE SOLUTION FOR YOU - CALL FOR DETAILS More information is available from or ask to speak to our Access Specialist It s that easy!! 449

29 Fort Heavy Duty Handy Steps Fort Handy Steps Fort Steel Framed Steps for Safety, Strength & Durability 7 day LIGHT GREY ONLY HS322Z Fort Handy Steps Description GS312Z COLOUR OPTIONS Red Green Blue Light Grey Grey Yellow specify when ordering x 457 x GS301Z with post 1200 x 457 x GS311Z x 515 x GS302Z with post 1330 x 515 x GS312Z Fort Double Sided Steps GS311Z Manufactured & approved to European GS standard Fitted with non-marking rubber feet & all weather non-slip injection moulded treads Tread size: 400W x 200D mm All weather, non-slip, injection moulded treads Overall HS322Z Overall Width mm Overall Depth mm HS322Z Fort Mobile Step - Tilt & Pull HS322Z COLOUR OPTIONS Red Blue Yellow Grey specify when ordering Fully welded tubular steel, with a looped handle. Fitted with non-marking rubber feet & all weather non-slip injection moulded treads Top tread height: 400mm Handle height: 650mm All weather non-slip injection moulded treads Mobile models are fitted with 4 x 80mm sprung weight reactive retractable swivel castors Tread size: 400 x 200mm Double sided tubular steel unit Resilient anti-slip treads, two swivel castors & a handle on one side COLOUR OPTIONS Red Blue Green Light Grey specify when ordering HS day HS HS9222 Description HS3212 Height MS7312 Mobile 2 step w/out handle 500 mm 575 x 490 x MS Mobile 2 step with handle 500 mm 1245 x 490 x MS Static 2 step w/out handle 500 mm 555 x 460 x HS Static 2 step with handle 500 mm 1255 x 460 x HS Height Tread Size mm 390 mm 1120 x 400 x x HS

30 GS Approved Fort Stable Steps Certified to EN standard Manufactured & approved to the recognised European GS standard size: 200D x 396W mm Open mesh treads facilitates safe use with muddy boots & in dirty environments Robust, ergonomic & heavy duty grey rubber non-marking grounding feet make these units extremely stable GS3002G Galvanised Finish GS3012M Fort Steel Framed Steps for Safety, Strength & Durability i Information EXTREMELY STABLE IN USE Fort Stable Steps GS3113M In Use GS3013M Description 2 Step Unit without Handrail Painted Finish Galvanised Finish 436 x 450 x GS3002M GS3002G Step Unit with Handrail x 450 x GS3012M GS3012G Step Unit with Handrail & Rear Wheels 990 x 450 x GS3112M GS3112G Step Unit without Handrail 636 x 450 x GS3003M GS3003G Step Unit with Handrail x 450 x GS3013M GS3013G Step Unit with Handrail & Rear Wheels 1190 x 450 x GS3113M GS3113G

31 Fort Machine Steps size: 550 x 300mm Fully welded construction with wide aluminium treads The optional handrail & the wheel facility means that these units are quick & easy to position into the required place MCS04Z, MCSHR4 & MCS01W MCS05Z Fort Steel Framed Steps for Safety, Strength & Durability Fort Handy Steps MCS03Z Wheels can be positioned inside the frame when not in use L x W x H mm x 665 x MCS02Z Optional Handrail to suit - MCS02Z MCSHR * x 715 x MCS03Z Optional Handrail to suit - MCS03Z MCSHR * x 765 x MCS04Z Optional Handrail to suit - MCS04Z MCSHR * x 815 x MCS05Z Fort Handy Steps MCS04Z, MCSHR4 & MCS01W Optional Handrail to suit - MCS05Z MCSHR * Optional Wheels - Factory Fitted MCS01W 58.65* *prices applicable when ordering with the Fort Machine Steps. Order charges will apply if ordered on their own. Strong steel frame Nestable, lightweight static steps All weather non-slip injection moulded treads HS301Z Fort Steel Framed Steps for Safety, Strength & Durability All weather, non-slip, injection moulded treads HS302Z 3 day Off (each) x 400 x HS301Z x 415 x HS302Z with post 1400 x 415 x HS312Z HS312Z

32 Fort Buttress Steps Certified to EN Manufactured & approved to the recognised European GS standard Graduated widths & a 45º easy slope comfort angle makes these steps strong, comfortable & stable The 2 step unit is static on 4 landing feet but can easily be carried. 3-5 step units are mobile on 2 x 150mm rear wheels which enable tilt & pull sizes: 2 tread - 400H x 630W x 250Dmm 3 tread - 600H x 600W x 250Dmm 4 tread - 800H x 550W x 250Dmm 5 tread H x 500W x 250Dmm Available with 4 tread options; mesh, non-slip phenolic, aluminium & galvanised Fort Steel Framed Steps for Safety, Strength & Durability BS9004A BS9003R & BS9103 COLOUR OPTIONS Red Blue Grey specify when ordering Fort Buttress Steps BS9003R & BS9103 BS9002M Wt Painted Tubular Steel Steps Galvanised Steps Mesh Tread Phenolic Tread Aluminium Tread Handrails to Suit Galvanised Tread Handrails to Suit x 760 x BS9002M BS9002R BS9002A BS * BS9002G BS9102G 37.35* x 900 x BS9003M BS9003R BS9003A BS * BS9003G BS9103G 37.35* x 900 x BS9004M BS9004R BS9004A BS * BS9004G BS9104G 43.10* x 900 x BS9005M BS9005R BS9005A BS * BS9005G BS9105G 48.60* *prices applicable when ordering with the Fort Buttress Steps. Order charges will apply if ordered on their own. 453

33 Stainless Steel Tilt & Pull Steps Tread size: 400 x 160mm size: 400 x 200mm Constructed from grade 304 stainless steel Grey non-marking rubber wheels at the front of the units enable the steps to be tilted forwards & wheeled into position are covered in a resilient anti-slip surface Fort Stainless Steel Steps Fort Steel Framed Steps for Safety, Strength & Durability SS2002 SS2004 SS2003 Top Step x 455 x SS x 480 x SS Fort Arrow Stainless Steel Steps x 550 x SS Certified to EN-131 Manufactured & approved to the European GS standard Tubular steel construction with non-slip tread plate Units are easy to manoeuvre on the 2 wheels - simply use the handles to lift the front & wheel into position A retro fit grip lift mechanism is available - see page 468 for details Tread size: 500W x 150Dmm size: 500W x 300Dmm 2 x 150mm nylon wheels 600mm high rear handrail Fort Steel Framed Steps for Safety, Strength & Durability - In Use x 640 x GS0603S x 670 x GS0604S x 700 x GS0605S x 730 x GS0606S x 760 x GS0607S x 790 x GS0608S Optional Grip Lift Mechanism (factory fitted) MS GS0604S

34 Fort Tilt & Pull Steps Available as a standard version or as a model which is DGUV Tested & is certified to EN Tread size: 400 x 150mm Top tread size: 400 x 200mm Wheels fitted at front enabling the steps to be tilted forwards Fitted with rubber feet & 2 x 75mm grey rubber tyred wheels Standard version fitted with resilient anti-slip treads with tread clamps. Available in blue only. DGUV version fitted with phenolic non-slip treads. Frame available in red, blue, yellow or green - please specify when ordering Resilient anti-slip treads with tread clamps Resilient anti-slip treads which are clamped to the steel tread by a high visibility yellow strip to prevent the edges peeling Fort Steel Framed Steps for Safety, Strength & Durability DGUV GS2003R DGUV COLOUR OPTIONS Red Blue Yellow Green specify when ordering DGUV GS2004R Fort Tilt & Pull Steps Top Step Standard Version - Anto-slip treads with tread clamps x 470 x WS x 490 x WS x 565 x WS DGUV Version - Phenolic x 490 x GS2002R x 520 x GS2003R x 540 x GS2004R Standard WS Tilted 455

35 Fort Easy Glide Domed Feet Steps All weather, non-slip, injected moulded treads Fort Mobile Steps COLOUR OPTIONS Red Blue Light Grey Green specify when ordering Specially designed steel domed feet The design incorporates a heavy duty pressed steel dome with an annular flange to facilitate the mounting of a moulded plastic rim which is shrink fitted for ultimate durability. The turned out rim gives significantly increased lateral strength & protection from side impact forces. These castors are fitted to the Fort Mobile Steps shown on pages 456 to 459 MEG514 Fort Steel Framed Steps for Safety, Strength & Durability MEG513 MEG Description W x D mm 2 Step with looped handrail x x 560 x MEG Step with full handrail x x 560 x MEG Step with full handrail x x 560 x MEG Step with full handrail x x 560 x MEG Step with full handrail x x 610 x MEG

36 Fort Mobile Steps Tread size: 400W x 150D mm These steps glide easily across floors, but once body weight is applied they stay firmly in position Fort Steel Framed Steps for Safety, Strength & Durability WS512 Specially designed steel domed feet The design incorporates a heavy duty pressed steel dome with an annular flange to facilitate the mounting of a moulded plastic rim which is shrink fitted for ultimate durability. The turned out rim gives significantly increased lateral strength & protection from side impact forces. These castors are fitted to the Fort Mobile Steps shown on pages 456 to 459 Resilient anti-slip treads with tread clamps WS day FROM STOCK BLUE ONLY COLOUR OPTIONS Red Blue Yellow specify when ordering WS513 These steps glide easily across floors, but once body weight is applied they stay firmly in position WS514 Fort Mobile Steps Resilient anti-slip treads which are clamped to the steel tread by a high visibility yellow strip to prevent the edges peeling WM513 WM515 Description 2 Step without handrail Size W x D mm Mesh Anti-Slip 580 x 560 x WM WS Step with looped handrail x 560 x WM WS Step with full handrail 960 x 560 x WM WS x Step with full handrail x 560 x WM WS Step with full handrail x 560 x WM WS Step with full handrail x 610 x WM WS

37 The Fort Premier Range of Mobile Steps All weather non-slip injection moulded treads Tread size: 400 x 200mm COLOUR OPTIONS Red Blue Light Grey Green specify when ordering Fort Mobile Steps MS6014 MS6012 & MS002Z MS6013 Specially designed steel domed feet The design incorporates a heavy duty pressed steel dome with an annular flange to facilitate the mounting of a moulded plastic rim which is shrink fitted for ultimate durability. The turned out rim gives significantly increased lateral strength & protection from side impact forces. These castors are fitted to the Fort Mobile Steps shown on pages 456 to 459 All weather, non-slip, injected moulded treads Fort Steel Framed Steps for Safety, Strength & Durability 458 Size W x D mm x x 560 x MS x x 560 x MS x x 560 x MS x x 615 x MS Optional extra safety post with handgrip for MS002Z 23.05* two step model - Height from floor: 1350 mm *price applicable when ordering with the Fort Premier Range of Mobile Steps. Order charges will apply if ordered on their own. MS6015

38 The Fort Easy Glide Range of Mobile Steps Certified to EN-131 DGUV Tested Expanded steel mesh treads or all weather, non-slip, injection moulded treads Tread size: 400 x 200mm Fort Steel Framed Steps for Safety, Strength & Durability GSE513 GSE515M COLOUR OPTIONS Red Blue Light Grey Green specify when ordering Specially designed steel domed feet The design incorporates a heavy duty pressed steel dome with an annular flange to facilitate the mounting of a moulded plastic rim which is shrink fitted for ultimate durability. The turned out rim gives significantly increased lateral strength & protection from side impact forces. These castors are fitted to the Fort Mobile Steps shown on pages 456 to 459 Expanded steel mesh treads or all weather, non-slip, injected moulded treads Fort Mobile Steps GSE514 GSE512M Size W x D mm Mesh Injected Moulded x x 560 x GSE512M GSE x x 560 x GSE513M GSE x x 570 x GSE514M GSE x x 610 x GSE515M GSE

39 GS Approved Fort Reactive Steps Certified to EN-131 Manufactured & approved to the recognised European GS standard All weather non-slip injected moulded treads Tread size: 400W x 200D mm COLOUR OPTIONS Red Blue specify when ordering Fort Mobile Steps GS7014 Fort Steel Framed Steps for Safety, Strength & Durability GS7013 All weather, non-slip, injection moulded treads Spring loaded castors Mobile on 4 spring loaded 80mm swivel castors. When body weight is applied the castors retract leaving the steps firm & safe on rubber feet GS7012 Description 460 W x D mm 2 Step with handle x x 510 x GS Step x x 620 x GS Step x x 650 x GS Step x x 670 x GS

40 Fort Mobile Steps Tread size: 400W x 150D mm 7 day MESH TREAD RANGE FROM STOCK Fort Steel Framed Steps for Safety, Strength & Durability Spring loaded castors WS7014 Mobile on 4 spring loaded 75mm swivel castors. When body weight is applied the castors retract leaving the steps firm & safe on rubber feet Resilient anti-slip treads with tread clamps. WM WM7015 Fort Mobile Steps Resilient anti-slip treads which are clamped to the steel tread by a high visibility yellow strip to prevent the edges peeling WM7010 WS7011 WS7012 Description 2 Step without handrail Size W x D mm Mesh Anti-Slip 580 x 540 x WM WS Step with looped handrail x 540 x WM WS Step with full handrail 1230 x 540 x WM WS Step with full handrail x x 540 x WM WS Step with full handrail x 550 x WM WS Step with full handrail x 665 x WM WS Step with full handrail x 750 x WM WS

41 The Universal Fort Steps Complies to EN mm deep treads Large working platform size: 450W x 550Dmm 1000mm high platform handrail with mid rail & kick rail Mobile on 2 x swivel braked 125mm rubber castors & spring loaded 75mm weight reactive rubber castors. Brake facility on the 125mm rear castors gives extra security when working for long periods in one position Safety chain facility with snap/lock carbine hooks at the entrance to the platform gives you greater safety when working above head height Fort Mobile Steps SP1204A Fort Steel Framed Steps for Safety, Strength & Durability COLOUR OPTIONS Yellow Blue specify when ordering TREAD OPTIONS Phenolic (non-slip) Aluminium (non-slip) Expanded Steel Mesh Safety Chain No of L x W x H mm Expanded Steel Phenolic Aluminium x 720 x SP1202M SP1202R SP1202A x 740 x SP1203M SP1203R SP1203A x 760 x SP1204M SP1204R SP1204A Fort Quick Folding Steps Certified to EN-131 Manufactured & approved to the recognised European GS standard size: 450W x 300Dmm 2 x 200mm black rubber tyred wheels Expanded steel tread size: 450W x 145Dmm Folds & unfolds without the use of nuts & bolts Constructed from tubular steel with two handles at the front, fitted with knuckle guard hand grips Fort Steel Framed Steps for Safety, Strength & Durability FGS7805M Folded 462 FGS7808M No of - In Use - Folded x 650 x x 650 x FGS7804M x 690 x x 690 x FGS7805M x 720 x x 720 x FGS7806M x 770 x x 770 x FGS7807M x 790 x x 790 x FGS7808M

42 Fort Duplex Reactive Mobile Steps 3 1 Standard Version with Expanded Steel 2 Standard Version with Phenolic non-slip GS Version which is also certified to EN-131 Unique frame within a frame design for maximum stability Standard or GS version available (GS version is & approved to the recognised European GS standard) Fitted with 4 sprung retractable 100mm swivel castors When body weight is added the castors retract, leaving the steps stable & safe on rubber feet No of 1 Size W x D mm Tread Size W x D mm Standard Version - Expanded Steel Available in Blue with a Blue Inner Frame x 480 x MS5931M x x x 480 x MS5941M x 680 x MS5951M x x x 680 x MS5961M Standard Version - Phenolic non-slip Available in Blue, Red or Light Grey with a Yellow Inner Frame - please specify colour when ordering x 470 x MSD x x x 470 x MSD x 660 x MSD x x x 660 x MSD MS5961M MSD103 Fort Steel Framed Steps for Safety, Strength & Durability GS Version - Phenolic non-slip Available in Blue, Red or Light Grey with a Yellow Inner Frame - please specify colour when ordering x 560 x GS x x x 560 x GS x 760 x GS x x x 760 x GS GS5941 Frame within a Frame weight reactive steps When your body weight is applied the uniquely designed inner frame will lower, resting all 4 non-slip rubber feet on the ground. This immobilises the wheels giving maximum stability & safety 1 Castors sit on the floor making these units easily manoeuvrable 2 When body weight is applied the rubber feet sit on the floor to stop the unit from moving 463 Fort Mobile Steps

43 Fort Tilt N Push Steps Standard or DGUV Tested version available Features a large working top platform: 490 x 600mm The steps have two handles at the front, fitted with knuckle guard hand grips for lifting. These units are then mobile on two fixed rear nylon 100mm castors rail height: 1000mm Tread size: 490 x 160mm Fort Tilt N Push Steps MS7806G Optional Inward Opening Gate - MS700Z No of 464 GS7815P Standard Version Galvanised Units Blue Painted Units x 660 x MS7803G MS7813P x 660 x MS7804G MS7814P x 660 x MS7805G MS7815P x 660 x MS7806G MS7816P Inward Opening Gate - factory fitted to the rear MS700Z MS710Z Retro-fit Lifting Barrier (see page 473 for details) SB781MS SB780MS DGUV Tested Version Fort Steel Framed Steps for Safety, Strength & Durability x 820 x GS7803G GS7813P x 820 x GS7804G GS7814P x 1020 x GS7805G GS7815P x 1120 x GS7806G GS7816P Inward Opening Gate - factory fitted to the rear GS700Z GS710Z Retro-fit Lifting Barrier (see page 473 for details) SB781GS SB780GS MS7814P fitted with MS710Z

44 GS Approved Fort Dock Steps Certified to EN Manufactured & approved to the recognised European GS standard Fitted with lift handles which incorporate knuckle guard hand grips & 2 x 150mm rubber tyred wheels which make these units extremely manoeuvrable Open rear allows step through access to a loading bay or lorry etc Tread depth: 145mm size: 400W x 300D mm GSD702R GSD703G Galvanised Finish Fort Steel Framed Steps for Safety, Strength & Durability GSD704M Fort Dock Steps Open rear allows step through access to a Loading Bay or Lorry etc GSD704M In Use No of Expanded Steel Phenolic Non-slip Powder Coated Finish x 480 x GSD702M GSD702R x 510 x GSD703M GSD703R x 540 x GSD704M GSD704R Galvanised Finish x 480 x GSD702G x 510 x GSD703G x 540 x GSD704G

45 Fort Mobile Steps GS Approved Fort Wheel Steps Certified to EN-131 Manufactured & approved to the recognised European GS standard Fitted with lift handles which incorporate knuckle guard hand grips & 2 x 150mm rubber tyred wheels which make these units extremely manoeuvrable size: 400W x 300D mm Tread depth: 145mm GSW704R GSW708M Fort Steel Framed Steps for Safety, Strength & Durability No of Expanded Steel Phenolic Non-slip x 540 x GSW702M GSW702R x 570 x GSW703M GSW703R x 600 x GSW704M GSW704R x 630 x GSW705M GSW705R x 660 x GSW706M GSW706R x 690 x GSW707M GSW707R x 720 x GSW708M GSW708R

46 GS Approved Fort Spring Steps Certified to EN-131 Manufactured & approved to the recognised European GS standard size: 400W x 300Dmm Tread depth: 145mm GSS704M Fort Steel Framed Steps for Safety, Strength & Durability GSS708R Fort Spring Steps Spring loaded castors Mobile on 2 spring loaded 75mm swivel castors & 2 x 150mm rubber tyred wheels. When body weight is applied the castors retract leaving the steps firm & safe on rubber feet No of Expanded Steel Phenolic Non-slip x 540 x GSS702M GSS702R x 570 x GSS703M GSS703R x 600 x GSS704M GSS704R x 630 x GSS705M GSS705R x 660 x GSS706M GSS706R x 690 x GSS707M GSS707R x 720 x GSS708M GSS708R

47 Fort Arrow Mobile Steps Certified to EN-131 Manufactured & approved to the European GS standard Units are easy to manoeuvre on the 2 wheels - simply use the handles to lift the front & wheel into position Resilient anti-slip treads Tread size: 500W x 150Dmm size: 500W x 300Dmm 600mm high rear handrail 2 x 150mm nylon wheels GS Fort Arrow Steps GS COLOUR OPTIONS Red Blue Grey specify when ordering GS0605 GS0608 Fort Steel Framed Steps for Safety, Strength & Durability GS MS0600 No of In Use x 640 x GS x 670 x GS x 700 x GS x 730 x GS x 760 x GS x 790 x GS Optional Retro Grip Lift Mechanism - see picture above MS GS0603

48 Fort Atlas Steps size: 550W x 380Dmm Tread depth: 145mm Made mobile with the use of the unique grip lift mechanism facilitating movement on the retractable castors Mobile on 2 x 160mm rubber wheels & 2 x 100mm swivel nylon castors MS1205M Unique Grip Lift Mechanism Fort Steel Framed Steps for Safety, Strength & Durability PLEASE CHECK THE OVERALL HEIGHT BEFORE ORDERING No of MS1210M Expanded Steel x 690 x MS1203M x 690 x MS1204M x 780 x MS1205M x 780 x MS1206M x 880 x MS1207M x 930 x MS1208M x 980 x MS1209M x 1030 x MS1210M x 1080 x MS1211M x 1130 x MS1212M x 1180 x MS1213M x 1230 x MS1214M x 1280 x MS1215M Fort Atlas Steps

49 Fort Heavy Duty Vantage GS Mobile Steps Fort Heavy Duty Mobile Steps Certified to EN-131 Manufactured & approved to the recognised European GS standard Tread size: 490W x 160Dmm size: 540W x 500Dmm Available with a choice of either phenolic non-slip treads or expanded steel mesh treads Standard comfort ladder angle of 54º Fitted with lever operated retractable front castors & a safety bar to deter access to the steps when they are in the mobile position 6 step units & above are sent folded for - easy to erect handrail height: 1000mm Mobile on 2 x 200mm rubber wheels & 2 x 100mm swivel nylon castors Fort Steel Framed Steps for Safety, Strength & Durability Optional retro-fit lifting barrier to the front (entry) of the platform of these steps. Also available for steps on pages 464 & 473 SB980GS GS9808M GS9805R & SG500Z OPTIONAL SECURITY GATE A Padlockable security gate (as shown above) can be factory fitted to the bottom of these steps SG500Z No of Height mm GS9808M PLEASE CHECK THE OVERALL HEIGHT BEFORE ORDERING Expanded Steel Phenolic Non-slip x 780 x 954 GS9803M GS9803R x 780 x 1121 GS9804M GS9804R x 910 x 1288 GS9805M GS9805R x 960 x 1425 GS9806M GS9806R x 1010 x 1622 GS9807M GS9807R x 1060 x 1789 GS9808M GS9808R x 1140 x 1956 GS9809M GS9809R x 1220 x 2130 GS9810M GS9810R x 1270 x 2290 GS9811M GS9811R x 1370 x 2457 GS9812M GS9812R x 1460 x 2650 GS9813M GS9813R x 1540 x 2791 GS9814M GS9814R x 1565 x 2975 GS9815M GS9815R

50 Fort Heavy Duty Vantage Mobile Steps Tread size: 490W x 165Dmm Made mobile with the use of the unique grip lift mechanism facilitating movement on retractable castors 6 step units & above are sent folded for - Easy to erect handrail height: 1000mm Mobile on 2 x 200mm rubber wheels & 2 x 100mm swivel nylon castors OPTIONAL INWARD OPENING GATE To allow access from the rear of the platform an inward opening gate can be factory fitted to the rear of the platform handrail No of Height mm Optional retro-fit lifting barrier to the front (entry) of the platform of these steps. Also available for steps on pages 464 & 473 Barrier only recommended for use with MS99 range due to the restricted area on the MS98 platform SB990MS MS500Z Size: 460mm Depth x 540mm Width PLEASE CHECK THE OVERALL HEIGHT BEFORE ORDERING Unique Grip Lift Mechanism Fort Steel Framed Steps for Safety, Strength & Durability size: 590mm Depth x 540mm Width MS9808M Expanded Steel Phenolic Non-slip Expanded Steel Phenolic Non-slip x 700 x 890 MS9803M MS9803R x 700 x 1060 MS9903M MS9903R x 700 x 1100 MS9804M MS9804R x 700 x 1270 MS9904M MS9904R x 700 x 1200 MS9805M MS9805R x 700 x 1370 MS9905M MS9905R x 700 x 1370 MS9806M MS9806R x 700 x 1540 MS9906M MS9906R x 700 x 1530 MS9807M MS9807R x 700 x 1700 MS9907M MS9907R x 700 x 1700 MS9808M MS9808R x 700 x 1870 MS9908M MS9908R x 700 x 1860 MS9809M MS9809R x 700 x 2030 MS9909M MS9909R x 700 x 2020 MS9810M MS9810R x 700 x 2190 MS9910M MS9910R x 800 x 2190 MS9811M MS9811R x 800 x 2360 MS9911M MS9911R x 800 x 2360 MS9812M MS9812R x 800 x 2530 MS9912M MS9912R x 1150 x 2520 MS9813M MS9813R x 1150 x 2690 MS9913M MS9913R x 1230 x 2690 MS9814M MS9814R x 1230 x 2860 MS9914M MS9914R x 1230 x 2850 MS9815M MS9815R x 1230 x 3020 MS9915M MS9915R x 1230 x 2920 MS9816M MS9816R x 1230 x 3190 MS9916M MS9916R x 1400 x 3180 MS9817M MS9817R x 1400 x 3350 MS9917M MS9917R x 1400 x 3350 MS9818M MS9818R x 1400 x 3520 MS9918M MS9918R Fort Heavy Duty Mobile Steps

51 Fort Heavy Duty Elite GS Mobile Steps Fort Heavy Duty Mobile Steps GS9309A Certified to EN-131 Manufactured & approved to the recognised European GS standard Tread size: 490W x 128Dmm Large working top platform: 540W x 590Dmm Heavy duty steel framed mobile steps Lifting step feature deters access until steps are safely grounded Ladder angle of 60º 6 step units & above are sent folded for - easy to erect TREAD OPTIONS Phenolic (non-slip) No of 472 Description L x W x H mm Aluminium (non-slip) Expanded Steel Mesh Wire Mesh Basket for GS Step 615 x 260 x 210 BSK93M * Tool tray for GS Step 615 x 260 x 210 BSK93T * Wire Mesh Basket for 490W mm Steps - page x 260 x 210 BSK58M * Tool Tray for 490W mm Steps - page x 260 x 210 BSK58T * Wire Mesh Basket for 770W mm Steps - page x 260 x 210 BSK69M * Tool Tray for 770W mm Steps - page x 260 x 210 BSK69T * Height mm GS9309A Fort Steel Framed Steps for Safety, Strength & Durability PLEASE CHECK THE OVERALL HEIGHT BEFORE ORDERING *prices applicable when ordering with the Fort Elite Steps. Order charges will apply if ordered on their own. Phenolic Non-slip Steel Tread Aluminium Tread x 680 x 972 GS9303R GS9303M GS9303A x 680 x 1104 GS9304R GS9304M GS9304A x 910 x 1237 GS9305R GS9305M GS9305A x 960 x 1370 GS9306R GS9306M GS9306A x 1010 x 1503 GS9307R GS9307M GS9307A x 1060 x 1635 GS9308R GS9308M GS9308A x 1110 x 1768 GS9309R GS9309M GS9309A x 1160 x 1901 GS9310R GS9310M GS9310A x 1210 x 2034 GS9311R GS9311M GS9311A x 1260 x 2167 GS9312R GS9312M GS9312A x 1370 x 2299 GS9313R GS9313M GS9313A x 1420 x 2432 GS9314R GS9314M GS9314A x 1425 x 2565 GS9315R GS9315M GS9315A GS9306M OPTIONAL EXTRAS Tool Tray & Wire Mesh Baskets which hook onto the guard rail (also applies to page 473) Optional retro-fit lifting barrier to the front (entry) of the platform of these steps. See page 473 for details. 3 to 5 Tread - SB931GS to 15 Tread - SB930GS UNIQUE BOTTOM SWINGING STEP This feature lifts the bottom step preventing access while the unit is mobile. Handle mechanism is fitted to the right hand side as standard

52 Fort Heavy Duty Elite Mobile Steps Large working top platform: either 600D x 540W mm or extra wide 600D x 820W mm Wide *770mm tread models also available on steps Strongly constructed steps highly manoeuvrable & stable 6 step units & above are sent folded for - easy to erect Fort Steel Framed Steps for Safety, Strength & Durability UNIQUE BOTTOM SWINGING STEP This feature lifts the bottom step preventing access while the unit is mobile. This also helps prevent knocked shins OPTIONAL EXTRAS Optional retro-fit lifting barrier to the front (entry) of the platform of these steps. Also for steps on pages 464 & 472 SB580MS REAR INWARD OPENING GATE To allow access from the rear of the platform an inward opening gate can be factory fitted to the rear of the platform handrail To Suit 490mm Wide MS500Z To Suit 770mm Wide MS600Z TOOL TRAY/WIRE MESH BASKET Please see page 472 for details MS No of Height MS5822 Size: 600D x 540W mm MS MS5831 PLEASE CHECK THE OVERALL HEIGHT BEFORE ORDERING Phenolic Non-slip Steel Aluminium Tread Size: 160D x 490W mm mm 1690 x 700 x 1060 MS MS MS mm 1920 x 700 x 1270 MS MS MS mm 2150 x 700 x 1370 MS MS MS mm 2380 x 700 x 1540 MS MS MS mm 2610 x 700 x 1700 MS MS MS mm 2840 x 700 x 1870 MS MS MS mm 3070 x 700 x 2030 MS MS MS mm 3300 x 700 x 2190 MS MS MS mm 3530 x 800 x 2360 MS MS MS mm 3760 x 800 x 2530 MS MS MS mm 3990 x 1150 x 2690 MS MS MS mm 4220 x 1230 x 2860 MS MS MS mm 4450 x 1230 x 3020 MS MS MS mm 4680 x 1230 x 3190 MS MS MS mm 4910 x 1400 x 3350 MS MS MS mm 5140 x 1400 x 3520 MS MS MS Size: 600D x 820W mm Tread Size: 160D x 770W mm * mm 3530 x 950 x 2360 MS MS MS * mm 3760 x 950 x 2530 MS MS MS * mm 3990 x 1150 x 2690 MS MS MS * mm 4220 x 1230 x 2860 MS MS MS * mm 4450 x 1230 x 3020 MS MS MS * mm 4680 x 1230 x 3190 MS MS MS * mm 4910 x 1400 x 3350 MS MS MS * mm 5140 x 1400 x 3520 MS MS MS Fort Heavy Duty Mobile Steps

53 Fort Wide Tread Trojan DGUV Mobile Steps Fort Wide Tread Mobile Steps Certified to EN-131 & DGUV Tested Extra wide treads:- easy slope: 750W x 180Dmm standard slope: 750W x 160Dmm size: 800W x 500Dmm There are two versions available: easy slope 48º angle which is for use in areas where there is space available, enabling the user to turn around & descend the steps facing forward. Standard slope 54º angle for use in areas where space is limited handrail height: 1000mm 6 step units & above are sent folded for. Easy to erect Fort Steel Framed Steps for Safety, Strength & Durability Unique Grip Lift Mechanism PLEASE CHECK THE OVERALL HEIGHT BEFORE ORDERING GS1108R Blue Trojan Range REAR INWARD OPENING GATE To allow access from the rear of the platform an inward opening gate can be factory fitted to the rear of the platform handrail of the Trojan S range of steps GS400Z Lever Operated Retractable Castors & Safety Bar GS4107 Grey Trojan S Range. Choose the Heavy Duty Trojan S range for the most Industrial Applications No of 474 Height mm Standard Slope Version - 54º angle Wt Easy Slope Version - 48º angle Phenolic Non-slip Expanded Steel Wt Phenolic Non-slip Expanded Steel Fort Wide Tread Blue Trojan DGUV Mobile Steps - Mobile on 2 x 200mm Black Rubber tyred wheels & 2 x 125mm Rubber tyred castors with a unique Grip Lift Mechanism x 960 x GS1003R GS1003M x 960 x GS1103R GS1103M x 960 x GS1004R GS1004M x 960 x GS1104R GS1104M x 960 x GS1005R GS1005M x 960 x GS1105R GS1105M x 980 x GS1006R GS1006M x 980 x GS1106R GS1106M x 1030 x GS1007R GS1007M x 1030 x GS1107R GS1107M x 1080 x GS1008R GS1008M x 1080 x GS1108R GS1108M x 1130 x GS1009R GS1009M x 1130 x GS1109R GS1109M x 1180 x GS1010R GS1010M x 1180 x GS1110R GS1110M x 1230 x GS1011R GS1011M x 1230 x GS1111R GS1111M x 1280 x GS1012R GS1012M x 1280 x GS1112R GS1112M Fort Wide Tread Grey Trojan S DGUV Mobile Steps - Mobile on 2 x 200mm Black Rubber tyred wheels & 2 x 125mm Rubber castors with lever operated retractable castors & a safety bar x 1000 x GS x 1000 x GS x 960 x GS x 960 x GS x 960 x GS x 960 x GS x 980 x GS x 980 x GS x 1030 x GS x 1030 x GS x 1080 x GS x 1080 x GS x 1130 x GS x 1130 x GS x 1180 x GS x 1180 x GS x 1230 x GS x 1230 x GS x 1280 x GS x 1280 x GS

54 Fort Wide Tread Spartan Mobile Steps Extra wide treads: 750W x 180Dmm sizes: 3 to 9 steps - 800W x 400Dmm 10 to 15 steps - 800W x 460Dmm Easy slope 48º angle which is for use in areas where there is space available, enabling you to turn around & descend the steps facing forward Welded expanded steel platform & treads with full handrails either side of the steps The units incorporate kick boards on 3 sides of the platform & knee rails around the platform Mobile on 2 x 200mm black rubber tyred wheels & 2 x 125mm rubber tyred castors mounted on the easy action unique grip lift mechanism 6 step units & above are sent folded for - easy to erect handrail height: 1000mm No of RETRO-FIT LIFTING BARRIER Optional barrier fitted to the front (entry) of the platform of this range of steps SB410GS MS x 960 x MS x 960 x MS x 960 x MS x 980 x MS x 1030 x MS x 1080 x MS x 1130 x MS x 1180 x MS x 1230 x MS x 1280 x MS x 1320 x MS x 1360 x MS x 1400 x MS MS4107 Fort Steel Framed Steps for Safety, Strength & Durability PLEASE CHECK THE OVERALL HEIGHT BEFORE ORDERING Fort Wide Tread Mobile Steps 475

55 Fort Easy Slope s Fort Easy Slope Mobile Steps Easy slope 48º incline - for safe & easy use size: 800W x 1200Dmm Extra wide treads: 750W x 180Dmm Fitted with grip lift mechanism to facilitate movement on the castors Expanded steel mesh treads & platform Mobile on 2 x 200mm rubber wheels & 2 x 125mm rubber castors Standard Fort Easy Slope s Removable platform chains on three sides for access GS Approved Fort Easy Slope s Certified to EN-131 Manufactured & approved to the recognised European GS standard Inward opening gates on 3 sides of the platform Fort Steel Framed Steps for Safety, Strength & Durability MS9106M Optional retro-fit lifting barrier to the front (entry) of the platform of the GS Approved Version SB910GS GS9108M Standard Version GS Approved Version No of Height mm Finish Finish x 960 x Powder Coated GS9102M x 950 x Powder Coated MS9103M x 960 x Powder Coated GS9103M x 950 x Galvanised MS9103G x 950 x Powder Coated MS9104M x 960 x Powder Coated GS9104M x 950 x Galvanised MS9104G x 950 x Powder Coated MS9105M x 960 x Powder Coated GS9105M x 950 x Galvanised MS9105G x 950 x Powder Coated MS9106M x 980 x Powder Coated GS9106M x 950 x Galvanised MS9106G x 1030 x Powder Coated GS9107M x 1080 x Powder Coated GS9108M

56 Fort Service s Ideal for access to mezzanine floors & for servicing large plant machinery/automotive equipment Two versions available: easy slope 48º angle which is for use in areas where there is space available, enabling the user to turn around & descend the steps facing forward. Standard slope 54º angle for use in areas where space is limited Extra large platform size: 800W x 1700Dmm Extra wide treads: 750W x 182Dmm Fitted with grip lift mechanism to facilitate movement on the castors Expanded steel mesh treads & platform Mobile on 2 x 200mm rubber wheels & 2 x 125mm rubber castors Complete with fixed handrail at the end of the platform & 1 hook-on platform handrail (handrail with centre rail for 2 to 6 tread units & handrail with centre & toe rail for 7 to 10 treads) Accessories MSP9304 & 2 x MPSX03 Hook on Handrail - MSPX02 Description Double Rail Hook on Handrail to suit 2 to 6 tread MSPX Triple Rail Hook on Handrail to suit 7 to 10 tread MSPX Extension to suit 2 to 6 tread MSPX Extension to suit 7 to 10 tread MSPX Extension MSPX03 or MSXP04. Used to bridge the gap between the step platform & anything you are trying to access NEW MSP9210 & 1 x MPSX04 Fort Service s No of Standard Slope Version - 54º Angle Easy Slope Version - 48º Angle x 960 x MSP x 960 x MSP x 960 x MSP x 960 x MSP x 960 x MSP x 960 x MSP x 980 x MSP x 980 x MSP x 1030 x MSP x 1030 x MSP x 1080 x MSP x 1080 x MSP x 1130 x MSP x 1130 x MSP x 1180 x MSP x 1180 x MSP x 1230 x MSP x 1230 x MSP

57 Fort Easy Steer Mobile Steps Fort Easy Steer Mobile Steps Unique six wheel design enables the step to virtually turn within its own length Fitted with lever operated retractable castors & a safety bar which deters access to the steps when in the mobile position Handle mechanism fitted to the right hand side as standard Units have expanded steel mesh treads & platform ES9809M step units & above are sent folded for - easy to Erect size: 540W x 460Dmm handrail height: 1000mm Wheels: 4 x 100mm fixed nylon castors 2 x 100mm swivel nylon castors Fort Steel Framed Steps for Safety, Strength & Durability PLEASE CHECK THE OVERALL HEIGHT BEFORE ORDERING No of 478 Height mm ES9809M Standard Slope Version - 54º angle Tread Size 490mm wide x 160mm deep x 720 x ES9807M x 720 x ES9808M x 720 x ES9809M x 720 x ES9810M x 820 x ES9811M x 820 x ES9812M x 1170 x ES9813M x 1250 x ES9814M x 1250 x ES9815M x 1250 x ES9816M x 1420 x ES9817M x 1420 x ES9818M Unique six wheel design reduces turning circle by circa 50%

58 Easy Tower Anodized aluminium tower with a built-in standing platform which opens for ease of use Built-in 60º inclined ladder Easily folds for ease of movement. Will fit through doorways & narrow aisles Complete with a built-in tool holder Mobile on 2 x 100mm nylon castors suitable for 150 SV-SET SV-SET-4 Folded SV-SET-4 Folded SV-SET-4 Tool Tray High Podium Steps SV-SET-4 Folded SV-SET-4 Part Folded x 550 x x 570 x SV-SET SV-SET-4 Complies to PAS mm all round lockable guardrail system with non-slip platform PODH07Z & POD12Z are mobile on 4 x swivel braked castors & POD10Z is mobile on 2 fixed & 2 swivel castors Folds & unfolds in seconds Fits through standard doorways Built in ballast bars eradicate the need for stabilisers but ensures the product is safe & secure size: 760 x 760mm Podium Steps PODH07Z folded PODH10Z Built in ballast bars PODH07Z Open Depth mm Working Overall Width mm to to PODH07Z to to PODH10Z to to PODH12Z

59 Large Aluminium - Glass Fibre Legs APJ03Z Ideal for compact storage & transportation as the unit is lightweight & the legs fold neatly underneath the platform The large serrated platform gives an anti-slip work surface 150 evenly distributed 3 day Work s APJ03Z i Information i Information INSULATED TO 10,000 VOLTS LARGE WORKING PLATFORM No of Size L x W mm Folded Size L x W x H mm x x 610 x APJ03Z APJ03Z Folded Aluminium with Tool Tray APB02Z Complete with plastic tray Lightweight unit ideal for compact storage & transportation as the tool tray & legs fold away The serrated treads & platform help give an anti-slip work surface height: 520mm Work tray height: 1160mm Subject to availability 150 evenly distributed 3 day 480 APB02Z No of Size L x W x H mm Folded APB02Z Folded x 320 x APB02Z

60 GS Approved Aluminium 3 day 150 evenly distributed APGS APGS03 Approved to the European GS standard Safety lock system locks legs in place Ideal for compact storage & transportation as the unit is lightweight & the legs fold neatly underneath the platform The serrated treads & platform help give an anti-slip work surface No of Size L x W x H mm Folded GS024Z x 300 x APGS Fort Adjustable Steel Work s Certified to EN Manufactured & approved to the European GS standard These modular units can be placed alongside each other to create a large working area Mild steel angle construction which is easily height adjustable - simply turn the threaded feet Fort Steel Framed Steps for Safety, Strength & Durability Work s GS041Z Phenolic Non-slip GS024Z Size L x W mm Galvanised Mesh Grid - 50 x 38mm Mesh Grid Phenolic Non-slip Height: 140 to 210mm Height: 230 to 300mm Height: 140 to 210mm Height: 230 to 300mm 610 x GS011Z GS021Z GS031Z GS041Z x GS012Z GS022Z GS032Z GS042Z x GS013Z GS023Z GS033Z GS043Z x GS014Z GS024Z GS034Z GS044Z

61 Fort Universal Work s Fort Work s Certified to EN Manufactured & approved to the European GS standard Non-slip aluminium platform & treads for increased safety Constructed from fully welded tubular steel 2 off 125mm castors at each end of the unit means these units can easily be wheeled into the correct position MP301A, 2 x HR300Z & 1 x MP100Z No of Size L x W 900 x 600 MP301A, 1 x HR300Z & 1 x MP100Z L x W mm Painted Version MP201G Galvanised Version 1300 x MP201A MP201G x x MP202A MP202G x x MP203A MP203G x 600 Optional Side Handrail for 2 Step Units HR200Z 99.90* HR200G * 1475 x MP301A MP301G x x MP302A MP302G x x MP303A MP303G x 600 Fort Steel Framed Steps for Safety, Strength & Durability Optional Side Handrail for 3 Step Units HR300Z * HR300G * 1650 x MP401A MP401G x x MP402A MP402G x x MP403A MP403G Optional Side Handrail for 4 Step Units HR400Z * HR400G * Optional End Rail MP100Z 81.75* MP100G * *prices applicable when ordering with the Fort Universal Work s. Order charges will apply if ordered on their own.

62 Fort Universal Modular Systems MUP408A & MUPHR4A MUP307A, MUPHR7A & MUPHR9A MUP208A MUP306A MUP305A MUP205A MUP405A & MUPHR5A MUP205A MUP206A Certified to EN Manufactured & approved to the European GS standard Non-slip aluminium platform & treads Constructed from fully welded tubular steel Designed to be placed alongside each other so that you can create a large working area Use the turn units to create L & T shapes. Ideal for manoeuvring around your machines No of L x W mm Painted Version Step Unit - Size: 500 x 600mm Galvanised Version x MUP208A MUP208G x MUP308A MUP308G x MUP408A MUP408G Extension Unit - Size: 1160 x 600mm 34 MUP205A MUP205G x MUP305A MUP305G MUP405A MUP405G Infil Unit - Size: 600 x 600mm 18 MUP206A MUP206G x MUP306A MUP306G MUP406A MUP406G Turn Unit - Size: 680 x 600mm 18 MUP207A MUP207G x MUP307A MUP307G MUP407A MUP407G MUP206A Description Painted Version Galvanised Version 2 Step Handrail MUPHR2A 67.50* MUPHR2G 87.55* 3 Step Handrail MUPHR3A 78.55* MUPHR3G * 4 Step Handrail MUPHR4A 88.10* MUPHR4G * Extension Side Handrail MUPHR5A * MUPHR5G * Infil Side Handrail MUPHR6A 61.20* MUPHR6G 79.55* Turn Side Handrail MUPHR7A 67.50* MUPHR7G 87.55* Extension & Infil End Handrail MUP208A MUP207A Fort Steel Framed Steps for Safety, Strength & Durability OPTIONAL EXTRAS Optional 1100mm handrails for all unit types including side & ends These handrails can be fitted as needed to suit your requirement Ideal to finish off your units MUPHR8A 65.45* MUPHR8G 84.65* Turn End Handrail MUPHR9A 69.55* MUPHR9G 90.25* *prices applicable when ordering with the Fort Universal Modular Systems. Order charges will apply if ordered on their own. 483 Fort Work s

63 Sky-High Tower Tested & certified to BSEN1004:2004 3T compatible Quick & easy to erect - saving time on each job Quick release pull rings with stainless steel pin on bracings for easy assembly Towers TBL i Information 484 TBL MEETS ALL REQUIREMENTS OF THE WORKING AT HEIGHT REGULATIONS Base Unit mm Wide Base Unit mm Wide Description 850mm Deep 1450mm Deep 850mm Deep 1450mm Deep System to 2.2M Height TBL TBL TBL TBL System to 2.7M Height TBL TBL TBL TBL System to 3.2M Height TBL TBL TBL TBL System to 3.7M Height TBL TBL TBL TBL System to 4.2M Height TBL TBL TBL TBL System to 4.7M Height TBL TBL TBL TBL System to 5.2M Height TBL TBL TBL TBL System to 5.7M Height TBL TBL TBL TBL System to 6.2M Height TBL TBL TBL TBL System to 6.7M Height TBL TBL TBL TBL System to 7.2M Height TBL TBL TBL TBL System to 7.7M Height TBL TBL TBL TBL System to 8.2M Height TBL TBL TBL TBL

64 Alpine Tower Tested & certified to BSEN1004:2004 3T compatible Base size: 730D x 1800W mm Quick & easy to erect - saving time on each job Fits easily into most small vans or estate cars Narrow width - compact & easy storage Quick release pull rings with stainless steel pin on bracings for easy assembly AP0600Z i Information FITS THROUGH DOORWAYS & EASILY INTO CAR BOOTS Towers AP6100Z Description System to 0.6M Height AP0600Z System to 1.6M Height AP1600Z System to 2.1M Height AP2100Z System to 3.1M Height AP3100Z System to 3.6M Height AP3600Z System to 4.6M Height AP4600Z System to 5.1M Height AP5100Z System to 6.1M Height AP6100Z

65 Fork Lift Cages Robust fully welded construction Complies with Health & Safety guidance note PM28-3rd Edition. Units are supplied with a user guide Fits quickly & easily to the majority of fork lifts Safety gate opens inwards, closing automatically through the use of a tension spring loaded retention latch Non-slip floor plate with a high kick plate Various safety features including: Internal grab rail Safety harness anchor point Drivers warning plate High visibility yellow finish Fork Lift Cages Economy Range Front opening gate Full height mesh rear guard Standard Range Front opening gate Mesh back & half sides Heavy Duty Range Side opening gate Large tool container i Information SAFE & STABLE ACCESS AT HIGH LEVELS FORK POCKET FOR ECONOMY RANGE Simply lift the bar on the side of the cage once the fork has been entered. The brace at the rear of the mechanism will then swing, fitting neatly behind the heel of the fork tines, securing the cage to the fork lift FLC08Z FLC01Z shown with FLC09Z FLC04Z Load Capacity 486 Size W x D mm Overall Wheels Economy Range x FLC08Z x Standard Range FLC01Z Swivel 125mm Nylon 74 FLC11Y Optional Tool Box - fitted with 2 hooks to hook onto the cage 3 FLC09Z x 800 FLC03Z Heavy Duty Range FLC02Z FLC02Z Swivel 125mm Nylon 120 FLC12Y FLC03Z Swivel 125mm Nylon 125 FLC13Y FLC04Z Swivel 125mm Nylon 132 FLC14Y FORK POCKET FOR THE STANDARD & HEAVY DUTY 184W x 83Dmm with inside clearance of 545mm & overall clearance of 921mm pin locks behind heel of fork tines Floating toggle to prevent accidental withdrawel of the pin NOTE: 65mm Fork Tine entry Fork pocket specifications can be altered to meet your requirements. Please specify when ordering