FIBREGLASS SINGLE-SECTION LADDERS

Transcription

1 1. Fibreglass ladders MODEL 01 FIBREGLASS SINGLE-SECTION LADDERS Fitted with Articulated feet. Optional Height-adjustable legs or Stabiliser base. Nº rungs F F F F F F F F F F F F F F F F F The values in the table are shown in millimetres. Articulated feet Stabiliser base Height-adjustable legs 2

2 MODEL 02 FIBREGLASS PUSH-UP EXTENSION LADDER The lower rung on the base section and the top rung on the extendable section are reinforced. This model is hand-operated and offers the advantage that both sections are detachable for use as single ladders. Rope-operation is recommended from 7 metres upwards. Fitted with articulated feet. Optional Height-adjustable legs. Stile dimensions Wheels F7206M No F7207M No F720M No F7209M No F7210M Yes F7211M Yes F7212M Yes F7213M Yes F7214M Yes s made to order F215M 2x32 Yes F216M 2x32 Yes F217M 2x32 Yes F21M 2x32 Yes F219M 2x32 Yes The values in the table are shown in millimetres. Height-adjustable legs Detachable sections Wheels 3

3 1. Fibreglass ladders MODEL 03 FIBREGLASS ROPE-OPERATED EXTENSION LADDER The ladder is fast and easy to operate thanks to its rope and pulley system designed to be handled from the front, making the ladder easier to extend. This system does not allow the ladder to be detached into two sections for separate use. Fitted with articulated feet. Optional Height-adjustable legs. F7210C F7211C F7212C F7213C F7214C F215C F216C F217C F21C F219C Stile dimensions 2x32 2x32 2x32 2x32 2x32 Nº sections x Nº rungs 2x10 2x11 2x12 2x13 2x14 2x15 2x16 2x17 2x1 2x The values in the table are shown in millimetres. Locking system Swivel feet Height-adjustable legs 4

4 MODEL 04 FIBREGLASS DOUBLE-SIDED STEPLADDER For increased support, as provided for in standard UNE-EN 131, the ladder is equipped with a stabiliser base with non-slip rubber pads. Fitted with two antisplay restraint straps between the two sections of the ladder, allowing each section to be opened 72º to the horizontal. The ladder has a width of mm. Nº sections x Nº rungs Stile dimensions FT05 2x FT06 2x FT07 2x FT0 2x FT09 2x FT10 2x FT11 2x FT12 2x FT13 2x FT14 2x FT15 2x FT16 2x The values in the table are shown in millimetres. Stabiliser base Anti-splay restraint strap 5

5 1. Fibreglass ladders MODEL 05 FIBREGLASS SINGLE-SECTION FOLDING LADDER The ladder is fitted with a locking system, so that it can be used as a single section, as a stepladder or completely folded for transport and/or storage. Stabiliser base fitted with non-slip rubber pads for greater stability as a stepladder. The ladder has a width of mm. F6106P F610P F6110P F6112P Nº sections x Nº rungs 2x3 2x4 2x5 2x The values in the table are shown in millimetres. Locking system Stepladder 6

6 MODEL 06 FIBREGLASS MULTI-PURPOSE LADDER This multi-purpose ladder offers the possibility of being used as either a stepladder, a push-up extension ladder or as a single-section ladder by detaching the sections. Fitted with two anti-splay restraint straps between the two sections of the ladder. When used as a stepladder this allows each section to be opened 72º to the horizontal. The ladder has a width of mm. Nº sections x Nº rungs FC7206 2x FC7207 2x FC720 2x FC7209 2x FC7210 2x FC7211 2x FC7212 2x The values in the table are shown in millimetres. Stepladder Detachable sections Stabiliser base 7

7 1. Fibreglass ladders MODEL 07 FIBREGLASS DOUBLE-SIDED COMBINATION STEPLADDER Stepladder ( 4) with a third, extendable section. This section can be used separately and is equipped with its own locking system. s FTE05 to FTE10 have a ladder width of mm whilst models FTE11 and FTE12 have a width of mm. FTE05 FTE06 FTE07 FTE0 FTE09 FTE10 FTE11 FTE12 Stile dimensions Nº sections x Nº rungs 3x5 3x6 3x7 3x 3x9 3x10 3x11 3x The values in the table are shown in millimetres. Locking system Stepladder Single section ladder

8 MODEL 0 FIBREGLASS DOUBLE SIDED LADDER WITH EXTRA-WIDE ALUMINIUM RUNGS Aluminium rung tread: 0 mm. Equipped with anti-splay system. Nº rungs FAT06P 2x FAT0P 2x FAT10P 2x FAT12P 2x The values in the table are shown in millimetres. Anti-splay system Wide rungs 9

9 1. Fibreglass ladders MODEL 9 FIBREGLASS DOUBLE-SIDED STEPLADDER WITH PLATFORM AND WIDE ALUMINIUM RUNGS Aluminium rung tread: 0 mm. Reinforced polypropylene platform. Top tool holder tray. Anti-splay restraint straps. FATP05P FATP06P FATP07P FATP0P FATP10P Nº rungs The values in the table are shown in millimetres. Wide rungs Tool holder tray 10

10 MODEL 10 FIBREGLASS FIXED VERTICAL LADDER This ladder is made entirely from fibreglass reinforced polyester, with yellow stiles and white rungs. The rungs are D-shaped with a 30 mm non-slip tread, which is horizontal when in use. The stile ends are protected by caps, whilst the rung seats are sealed with plugs. The ladder is secured to the wall and to the pit floor with stainless steel brackets. Optionally, the ladder can be fitted with two hand grips which extend out of the pit and which are folded away after use. Safety rings can also be optionally fitted. Pit ladders are manufactured to the requirements of standard UNE-EN (machinery safety. Permanent means of access to industrial machinery and facilities. Part 4: Fixed ladders). This model is customised to meet the requirements of each particular situation. Optional rest platform Hand rails 11

11 1. Fibreglass ladders MODEL 11 FIBREGLASS LADDER WITH PLUG-IN SECTIONS FOR POSTS The ladder comprises a base section, the intermediate sections required to reach the desired height, and a top section. Base section F-PBAS: 7 rungs and a height of 2 metres. Accessories: -- Rubber swivel feet for added grip on the ground. -- Two post lashes, located at the third and seventh rungs from the base. -- Two post grips. Intermediate sections F-PINT: 7 rungs and a height of 2 metres. Accessories: -- One post lash, located at the height of the fifth rung from the base of the section. -- One post grip. Upper section F-PSUP: 4 rungs and height of 1.4 metres. Accessories: -- One post lash located at the height of the third rung from the base of the section. -- One post grip. Each post lash has a total length of 2.3 metres. Optional height-adjustable legs. Height-adjustable legs Support and anchor system Connection system 12

12 2. Assault ladders for fire fighting purposes ASSAULT LADDERS FOR FIRE-FIGHTING Assault ladders manufactured to the requirements of the UNE-EN 1147 standard: Portable ladders for fire fighting. F-ASALT-P has the special feature of being foldable, by means of a steel hinge. The hooks and rope fittings are made of steel. Normally the hooks have an interior diameter of 160 mm, however it is also possible to mount 200, 250, 305, 350 or 500 mm hooks. Stainless steel hardware. Nº rungs F-ASALT F-ASALT-P Nº rungs The values in the table are shown in millimetres. 1 2 F-ASALT Hooks and rope fittings 1 2 F-ASALT-P Folding hinge 13

13 3. Safety ladders FIBREGLASS LADDER WITH TELESCOPIC LEGS Fibreglass ladder equipped with aluminium extendable legs which secure the ladder in position, should the support fail. Compatible with 2 ladder. Locking system Gripper Extendable leg system 14

14 FIBREGLASS SAFETY LADDER FOR POSTS This safety ladder for posts is equipped with an anchor point to allow the operator to use a lifeline. To do so, the ladder needs to be stabilised using a rope lash secured to the post. Post accessories for the following models: 1. Single section fibreglass ladder 2. Push-up fibreglass extension ladder 3. Rope-operated fibreglass extension ladder Rope lash and lifeline Gripper 15

15 3. Safety ladders FIBREGLASS SAFETY LADDER FOR FAÇADES The safety ladder for façades is equipped with an anchor point to allow the operator to use a lifeline. To do so, the ladder needs to be stabilised by increasing the support area on the ground and on the wall. Post accessories for the following models: 1. Single section fibreglass ladder 2. Push-up fibreglass extension ladder 3. Rope-operated fibreglass extension ladder Base stabiliser Top stabiliser 16

16 17

17 4. Timber ladders TYPE A SINGLE SECTION TIMBER LADDER Pine stiles and beech rungs. Optional swivel feet. Rung on its edge: 24.5 mm tread Nº rungs A A A 2340 A A A A A A A A Flat rung: 54 mm tread Nº rungs A6P A7P AP A9P A10P A12P A14P A16P A1P A20P A21P Rung on its edge Flat rung 1

18 ROPE-OPERATED TIMBER EXTENSION LADDER TYPE B The ladder is fast and easy to operate thanks to its rope and pulley system designed to be handled from the front, making the ladder easier to extend. This system does not allow the ladder to be detached into two sections for separate use. Optional swivel feet Nº rungs B10 2x B12 2x12 2x B14 2x16 2x B16 2x20 2x B B B The values in the table are shown in millimetres. Locking system 19

19 4. Timber ladders TYPE T PUSH-UP TIMBER EXTENSION LADDER This ladder is extended by hand and offers the advantage of having detachable sections. A rope-operated ladder is recommended from 7 metres upwards. Optional swivel feet. Nº rungs T7 2x T9 2x T10 2x T12 2x T14 2x s made to order T16 2x T1 2x The values in the table are shown in millimetres. Detachable sections 20

20 TIMBER DOUBLE-SIDED STEPLADDER TYPE D Pine wood stiles and beech rungs. Rung on its edge: 24.5 mm tread Nº rungs D4 2x D5 2x D6 2x D7 2x D 2x D9 2x D10 2x D12 2x D14 2x D16 2x Flat rung: 54 mm tread D4P D5P D6P D7P DP D9P D10P D12P D14P Nº rungs 2x4 2x5 2x6 2x7 2x 2x9 2x10 2x12 2x Rung on its edge Flat rung 21

21 4. Timber ladders TYPE G MARITIME PINE DOUBLE-SIDED STEPLADDER This ladder is fully manufactured from maritime pine wood. The hinges are galvanised iron. It is fitted with an anti-splay safety chain and insulating nonslip rubber feet. Rung on its edge: 24.5 mm tread Nº rungs G3 2x G4 2x G5 2x G6 2x G7 2x G 2x G9 2x G10 2x Flat rung: 54 mm tread Nº rungs G3P 2x G4P 2x G5P 2x G6P 2x G7P 2x GP 2x G9P 2x G10P 2x The values in the table are shown in millimetres. Hinge and chain Rung on its edge Flat rung 22

22 23

23 5. Accessories POST GRIP 35 mm wide polyester band. To be mounted on the top rung, so that it rests against the post. High strength. Replaceable. Recommended for all single section and extendable models, for fibreglass and timber ladders alike. POST GRIP AND LASH 35mm wide, 1.5 m long polyester belt fitted with a rapid grip device. Mounted above the top rung to secure the ladder to the post. High strength. Replaceable. Recommended for all single section and extendable models, for fibreglass and timber ladders alike. HEIGHT-ADJUSTABLE LEGS Made from stainless steel. Non-slip articulated feet on the base. Maximum height difference: 225 mm. For fibreglass single section and extension ladders (push-up and rope operated). Feet for dimensions : s starting with F6. Feet for dimensions : s starting with F7. Feet for dimensions 2x32: s starting with F. 24

24 150 mm TREAD PLATFORM 150 mm tread portable platform. Provides a greater support surface for user comfort. Easily dismountable. Recommended for fibreglass single-section ladders, stepladders and extension ladders. HOOKS, CHAINS AND EYEBOLTS 160 mm diameter stainless steel hooks (hook interior dimensions) and chain with karabiner to secure the ladder. Two eyebolts on the bottom of the ladder on the outer face of the stiles. Recommended use: fibreglass single section ladders for work on electricity pylons. STILE EXTENSIONS FOR FIBREGLASS STEPLADDERS AND SINGLE SECTION FOLDING LADDERS Optionally, a stile extension can be mounted on the ladder for work on ramps or stairs. This extension has 4 hooks to hook onto two of the ladder rungs and a safety cam lock to prevent the extension from coming off during use. Manufactured from the same materials as the ladder: fibreglass reinforced polyester with yellow stiles and white rungs. Use recommended for Nº rungs Length (mm) Max. difference in height (mm) Approx. weight () FSB03 FSB04 FSB05 FSB06 FT05 FT06 FT07 y y F610P F6110P F6112P FSB07 FT

25 6. Spare parts and maintenance SPARE PARTS AND MAINTENANCE Glassfibre ladders have a long service life. However, this may be reduced by the breakage or wear of a particular part of accessory. Escaleras Arizona can supply all the necessary spare parts accompanied by easy-to-follow replacement instructions. In addition, Escaleras Arizona offers its customers a maintenance service to perform any necessary repairs. 26

26 7. Other products WOODEN POST SAFETY SUPPORT LEGS To secure the post and protect against possible breakage as a result of underground rotting or any other undetected defect at the base. Made from stainless steel. MANHOLE COVER LIFTERS Equipped with a range of hooks to adapt to the different cover models. Detachable handle for ease of transport and storage. FOOTREST PLATFORM FOR ELECTRICITY LINES Recommended for work on electricity lines. Made from aluminium. Accessories for work on concrete supports with and without holes and metal and lattice supports. Foldable for ease of transport and storage. Dimensions calculated for transport inside the rescue rod holder. FIBREGLASS SCAFFOLDING Non-conductive fibreglass scaffolding designed for the electrical and industrial markets. Scaffolding manufactured from nonconductive, high-strength 50.0 mm diameter fibreglass tubing. The work platforms are equipped with a trapdoor for access from within the scaffolding on one side, with rungs every 30 cm. The vertical side ladder is attached to the scaffolding on one of the side frames. Tested to 1000 volts. Manufactured in a range of heights and models (for more details, please consult us). 27