DOCKING AND ANCHORING EQUIPMENT

Transcription

1 Electric Windlasses Anchors Bow Rollers Chains Ropes Mooring Springs Blocks Turnbuckles Thimbles Shackles-Snaphooks-Swivels Rings & Eye Plates Fenders Inflatable Rollers Fender Covers

2 3YEARS GUARANTEE HORIZONTAL WINDLASS BREEZE Specially designed for smaller size boats with compact one-piece housing that ensures water resistance. A torque limiter delivers smoother operation while a heat radiating system prevents motor overheating. Easy operating and easy to install. Τhe Gypsy runs both rope and chain. Available with control unit for drop speed chain or free fall, circuit breaker, hardwares and manual. Available spare plastic gypsy code and spare stainless steel gypsy code Volt Watt Maximum working load Max Power Pull Chain Rope Drop Speed chain Weight Suits boat sizes V 300 W 20 kg 120 kg m/min. 4.3 kg 4.5-6m 3YEARS GUARANTEE Volt Watt HORIZONTAL WINDLASS PRO800 Specially designed with compact one-piece housing that ensures water resistance. A torque limiter delivers smoother operation. Easy operating and easy to install. Τhe stainless steel Gypsy runs both rope and chain while a heat radiating system prevents motor overheating. Available with control unit for drop speed chain or free fall, circuit breaker, hardwares and manual. Available spare metal gypsy code and Maximum working load Max Power Pull Chain Rope Drop Speed chain Weight Suits boat sizes V 600 W 40 kg 275 kg m/min. 8.2kg 6m - 9m 3YEARS GUARANTEE HORIZONTAL WINDLASS PRO900M The PRO 900 series is a perfect for boats between 8.4m m Specially designed with compact one-piece housing that ensures water resistance. A torque limiter delivers smoother operation. Easy operating and easy to install. Τhe stainless steel Gypsy runs both rope and chain while a heat radiating system prevents motor overheating. Available with solenoid up/down switch, circuit breaker, hardwares and manual. Available spare metal gypsy code Volt Watt Maximum working load Max Power Pull Chain Rope Drop Speed chain Weight V 1100 W 72 kg 500 kg m/min. 9.2kg Suits boat sizes 8.4m -13.5m 3YEARS GUARANTEE HORIZONTAL WINDLASS The windlass base is made of aluminum alloy with special powder coated and high-efficiency heavy duty motor and gear box. This electric-operated capstan provides excellent drag force and long life performance. It can be combined with circuit breaker code 4656 and foot switch code Volt Watt Maximum working load Max Power Pull Rope Drop Speed Weight kg V 350 W 45 kg 275 Kg m/min. 7,5 117

3 3YEARS GUARANTEE VERTICAL WINDLASS PRO VΝ600 Made of nylon and fiberglass, run both rope and chain. A torque limiter delivers smoother operation while a heat radiating system prevents motor overheating. Extremely durable and easy to install. Available with control unit, circuit breaker, manual handle bar, hardwares and manual. Available spare metal gypsy with code Volt Watt Maximum working load Max Power Pull Chain Drop Speed chain Weight Suits boat sizes V 600 W 45 kg 275 kg 6 22 m/min. 5kg m 3YEARS Volt Watt GUARANTEE VERTICAL WINDLASS PRO VΑ1000 Made of aluminum alloy with powder coated, run both rope and chain. A torque limiter delivers smoother operation. Extremely durable and easy to install. Available with control unit, solenoid circuit breaker, manual handle bar, hardwares and manual. Available spare gypsy with codes and Maximum working load Max Power Pull Chain Drop Speed chain Weight Suits boat sizes V 1100 W 72 kg 450 kg 6/8 20 m/min. 6,8kg 8,4-12,6m 3YEARS GUARANTEE VERTICAL WINDLASS The windlass base is made of stainless steel, and high-efficiency heavy duty motor and gear box. This electric-operated capstan provides excellent drag force and long life performance. The streamline look is very convenient as the metal gearbox, heavy duty DC motor and base have been designed as one, making the installation simple. It can be combined with circuit breaker code 4656 and foot switch code Volt Watt Maximum working load Max Power Pull Rope Drop Speed Weight V 350 W 45 kg 275 Kg m/min. 6 Kg 3YEARS GUARANTEE VERTICAL WINDLASS Vertical windlass with all parts above deck made of polished 316 stainless steel including the base, chain tunnel cover, gypsy and capstan. The gearbox, heavy duty DC motor and base have been designed into one, with no separate parts for easy installation. Capstan and Gypsy are able to be operated separately. Available with solenoid, up/down switch, circuit breaker, screws and installation manual of spare gypsy Ø Chain 8 DIN DIN766 Ø Rope Κωδ. Volt Watt Max Working Load Typical Working Load Chain Rope Retrieval Speed Weight Boat Type /24V 1500 W 680 kg 120 kg m/min 16 kg With capstan 12-18m kg Without capstan 118 Τ: Ε: export@eval.gr export2@eval.gr

4 The procedure of throwing and retrieving the anchor is one of the most difficult ones during our time on board. Electrical windlasses ANCHORWINDLASS can make these procedures much easier. They are available in a big variety of types depending on their performance, size and type of chain and rope they can accept. They are also available in internal and external mounting type as well as their necessary equipment. Both of the types have guarantee. BOAT LENGTH 5,5 6,5 8 9,5 10, ,5 20 MOTER (WATT) BOAT WEIGHT ELECTRIC WINDLASSES BARRACUDA Powerful and compact windlasses. Parts above deck in high polished stainless steel. Manual free fall with adjustable clutch. Available with handle, solenoid, user manual and mounting guide. Work with chain only or rope/chain combination. The motor can be mounted in all 4 directions Without capstan Also available spare gipsy code 1853 for chain 7/ rope 12 and code for chain only Volt 12V 12V Watt 600 W 900 W Maximum working load 150 kg 220 kg Max Power Pull 450 kg 660 kg Chain 6 6 Chain / Rope 7 / 12 Drop Speed chain 26 m / min 40 m / min Weight 9 Kg 9 Kg Suits boat sizes 6-10 m 8-11 m Also available spare gipsy code 1853 for chain 7/ rope 12 and code for chain only With capstan Volt 12V 12V Watt 600 W 900 W Maximum working load 180 kg 220 kg Max Power Pull 540 kg 660 kg Chain 6 6 Drop Speed chain 26 m / min 40 m / min Weight 10 Kg 10 Kg Suits boat sizes 6-10 m 8-11 m 119

5 1872 Without capstan ELECTRIC WINDLASSES DOLPHIN Low profile model. Powerful windlasses with a new compact motor. Manual free fall with adjustable clutch. Parts above deck in high polished stainless steel (1872, ) or aluminium (1931-1, ). Work with rope/chain combination. The motor can be mounted in all 4 directions Type Volt Watt Max Working Load Max Power Pull Chain Chain / Rope Chain Speed Weight Boat Stainless steel 12V 1000 W 250 kg 750 kg m / min 20 Kg 9-14 m With capstan Type Aluminium Volt 12V Watt 1000 W Max Working Load 250 kg Max Power Pull 750 kg Chain 8 Chain / Rope 14 Chain Speed 40 m / min Weight 21 Kg Boat 9-14 m 120 Τ: Ε: export@eval.gr export2@eval.gr

6 Volt 12V 12V Watt 1200 W 1500 W Max Working Load 400 kg 485 kg Max Power Pull 1100 kg 1200 kg Chain / Rope 8 /14 10 /16 Chain Speed 40 m / min 40 m / min Weight 27 Kg 27 Kg Boat m m ELECTRIC WINDLASSES MAKO Low profile model. Manual free fall with adjustable clutch. Parts above deck in high polished stainless steel. The motor can be mounted in all 4 directions Volt 12V 12V Watt 1200 W 1500 W Max Working Load 400 kg 485 kg Max Power Pull 1100 kg 1200 kg Chain / Rope 8 /14 10 /16 Chain Speed 40 m / min 40 m / min Weight 25 Kg 25 Kg Boat m m With capstan Without capstan STAINLESS STEEL ANCHOR WINDLASSES Powerful and compact all above deck windlasses. With housing made of high polished stainless steel 316. Suitable for boats with limited space underneath the deck. Easy to install Volt 12 V 12 V Watt 600 W 900 W Max Working Load 180 Kg 250 Kg Max Power Pull 540 Kg 750 Kg Chain 6 6 Chain Drop Speed 35 m/min 35 m/min Weight 13 Kg 13 Kg Boat 6-9 m

7 ELECTRICAL DRUM WINCH HEAVY DUTY FOR MULTIPLE USES Electrical drum winch heavy duty with powerful motor for every marine or fishing use (for pulling up the anchors, the nets etc). Available with stainless steel 316 drum both in simple or free fall type. Watt Volt Type Max Line Speed m/min Max Power Pull Kg Max Working Load Kg Weight kg 1963 Simple 12,7 900W 12V 30 m/min 250kg 70kg Free Fall 14 Rope 10 LOCK-IN WINCH HANDLE Made of aluminum alloy. Length Color Grey LOCK-IN FLOATING WINCH HANDLE Made of light but strong plastic. Length FLOATING WINCH HANDLE WITH LOCKING Fitted with Lock In winch system, universal size for any winch, handle grip on ball bearing, made of nylon (fiberglass), ensure the same strength as steel handles SPEEDGRIP BALL BEARING WINCH HANDLE Made of aluminum, with plastic handle WINCH HANDLE Made of aluminum, with safety lock. Black. Length Length Length ANCHOR CHAIN ALLOCATOR The easy chain system is a motorized oscillating tube in which the chain runs. The system automatically activates whenever the anchor windlass is set in motion, it starts oscillating placing the chain in the lower and wider part of the peak. While lowering, the pipe will automatically set in central position. It is easy to be fit. The product is installed on the double sided system support plates which are already made out according to the type of peak. It can work together with all kinds of electric windlasses and can be placed in any boat. After installation it collects and distributes the chain properly avoiding tangles and jams during anchor descent. A B C D E F Watt Volt Current mα Chain Connection wires Oscillating tube angle Tube Weight kg Electrical Protection up to ,3 ΙP up to ,4 ΙP Τ: Ε: export@eval.gr export2@eval.gr

8 2223 INSTALLATION CABLES FOR WINDLASSES For all types. For windlass from 500 to 1500 Watt. 2 red cables 2 m, one red cable 0,4 m and one black cable 8 m WATERPROOF SWITCH PANEL UP/DOWN WATERPROOF AUTOMATIC, THERMAL, CIRCUIT BREAKER Volt Watt Windlass Αmper V V V RADIO CONTROL UNIT FOR ANCHOR WINCHES & GANGWAYS For operating it uses radio frequency and 2 available channels. Operating frequency Number of channels ,92MHz 2 BREAKER FOR OVERCHARGE PROTECTION OF THE WINDLASS The magneto-hydraulic breaker protects motor from overcharges and short circuit. Amps Volt /24 80 x REMOTE CONTROL (RADIO RECEIVER-TRANSMITTER) UP/DOWN/RIGHT/LEFT Four Channels. Suitable for gangways 2211 UP/DOWN FOOT SWITCH WITH A SAFETY COVER (Pair) Usually mounted on deck near the anchor windlass. 2 items Blister package. REMOTE CONTROL UNIT FOR ANCHOR WINCHES AND GANGWAYS Anatomic shape with an ergonomic soft rubber side grip. Operation buttons H 145 x W x Thickness

9 REGULAR AND REVERSE SOLENOID UNITS Suitable for windlasses from 300 to 1500 W - 12 V. Thanks to the external connections they are easy to install. Type Volt Watt Solenoid 12V Reversed Solenoid 12V WIRELESS DIGITAL CHAIN METER COUNTER AND REMOTE CONTROL UNIT Without cable ties, plug or panel, operating with rechargeable battery. The radio chain counter allows freedom of maneuvers and comfort during the anchorage operations. Available with rechargeable cable. Operating frequency 3185 H 145 x W 50 x Depth Mhz SPARE CIRCUIT BREAKER 30Α with waterproof cup. Suitable for the codes 1861,1909 και MAGNETIC SENSOR CHAIN COUNTER KIT Necessary for the function of codes , , Ø 63 x H 63 DIGITAL CHAIN METER COUNTER Digital chain meter counter. Four different models to choose from. Volt Description L 100 x W / 24 Chain counter L 62 x W / 24 Flush mounted chain counter L 100 x W / 24 Chain counter with operating control for electric windlass ideal for flybridge applications 3187 L 100 x W 100 Digital radio chain counter with control unit. The receiver is easily mounted near magnetic sensor and the instrument is mounted on flybridge connecting only to the battery. Operating frequency 868 Mhz Τ: Ε: export@eval.gr export2@eval.gr

10 FLAT ANCHOR BRITANY Made of high resistance galvanosed steel (55 Kg of steel per sq. ) Instant bring into the sea bed : To prevent potential fouling, the Britany has no large crown. To avoid clogging by pebbles, the Britany has no link cage. Thin flukes with sharp edges : to ensures quick digging even in the hardest sea beds. Geodynamic flukes, ensuring easy burial and perfect holding. High resistance shank, cast in one piece : gives perfect resistance even to a strong lateral pull. Narrow crown, designed to lift the rear of the anchor, so that the flukes dig in iediately. Boat Length Weight Kg Dinghy, tender Dinghy, small 3, catamaran ,50 m ,50 m ,50 m m ,50 m ,50 m m A B DELTA ZINC-PLATED STEEL ANCHORS Its best features include the exceptional grip to grab into any type of seabed (including seaweed grounds), the quickness to re-grab the grip when the spinning boat tends to trip the anchor, the real ability to improve its grip when the wind increases. The tests carried out under various conditions confirm that the Delta anchor has the best grip/weight rate. Length Width Weight Kg Boat Length m < < <13, <15 125

11 DELTA ANCHOR Hot galvanized steel. Weight Kg , DELTA ANCHOR Weight Kg ANCHOR BRUCE TYPE Kg , , , ANCHOR BRUCE TYPE Hot galvanized steel. Kg , ANCHOR DANFORTH TYPE Hot galvanized steel. Kg ANCHOR G.B TYPE Hot galvanized steel. Kg ADMIRAL NAUTICAL TYPE Hot galvanized steel. Kg Τ: Ε: export@eval.gr export2@eval.gr

12 ANCHORS ULTRA STAINLESS STEEL Anchors ULTRA are completely hand-made of 316 stainless steel and hand polished, designed for excellence. If inverted it will instantly recover itself to the attack position. Such performance has been achieved with the innovative patented features this anchor displays; including a curved lead filled tip for instant penetration, a hollow shank for optimal weight distribution, concaved base surfaces for maximum holding power and large side wing plates to avoid release during changing wind or tide conditions. Furthermore, each anchor is easily recoverable with the flat pivot surface on the underside base. The Anchor ULTRA is suitable for all vessel types and locates securely onto the bow roller. Sourcing Europe s finest materials and fabricated by specialist engineers, the Anchor ULTRA is supplied with a LIFETIME WARRANTY against manufacturing defects under normal conditions and use. Certified by ABS. of Anchor Weight Kg 5 Kg 8 Kg 12 Kg 16 Kg 21 Kg 27 Kg 35 Kg 45 Kg A 293, ,6 432,2 473,2 514, B 165,4 193,5 221,4 243,7 266,9 290, C 109,5 128,1 146,6 161,4 176,7 192, ,8 D Ø E 52,3 61, ,3 91, ,7 F 71,6 83,8 95,9 105,5 115,6 125, G 255,1 298,4 341,6 375,9 411,6 447, ,6 H 330,4 386,4 442,3 486, , ,2 I 180,9 211,6 242,2 266,5 291,8 317, ,2 J 79,5 92,9 106,4 117,1 128,2 139, ,3 K 13,6 15,9 18, ,9 23, ,3 L 45,5 53,2 60, ,4 79, ,6 127

13 ULTRA FLIP SWIVEL STAINLESS STEEL The ULTRA Flip Swivel is a uniquely fabricated anchor swivel, connecting the chain and the anchor without the need of additional shackles. Fabricated from 316 stainless steel and hand polished for stunning presentation on the bow, the ULTRA Flip Swivel is uniquely strong, slim line and does not require any locking pins or safety wires. The breaking strength of the swivel is typically higher than the chain connected and allows 30 degree rotation with complete 360 degree swivel. The ULTRA Flip Swivel is fabricated with a unique flipping nub and rear bridge; assisting to recover the anchor right-way up onto the bow roller. Flipping nub, combined with the rear bridge and ULTRA Flip Swivel s rotation and complete 360 degree swivel ability, ensures setting and recovering your anchor is an easier and safer task. Hexagonal head locking bolts prevent the need for additional grub screws to secure the swivel pins, and every Ultra Flip Swivel has the breaking strength listed on the rear of its one piece body. Three year warranty. Spherical jointed to every direction. It is not casted therefore it is not fragile. Made of quality massive stainless steel 316 in one piece by processing. Chain Length A Anchor Part B x C x D x E x F Breaking Load Kg Max Anchor Weight Kg ,5 40 x 19 x 13 x 16 x 36, x 21 x 14,5 x 18 x ULTRA CHAIN GRAB STAINLESS STEEL The ULTRA Chain Grab, Rope and Snubber Kit is a unique design that allows it to be easily attached and unattached the loaded and stretched chain. Eliminate the stress of a loaded anchor chain on the windlass, and the creaking sound of an anchor chain on the bow roller. ULTRA Chain Grab eliminates these concerns by transferring chain pressure from the windlass to the mooring cleat. The ULTRA Chain Grab is made of 316L stainless steel. Its spherical head hooks onto the anchor chain, and stays attached as the anchor chain is lowered into the sea. By its special projected form, it can be easily attached and unattached from the loaded and stretched chain. It has a stroke absorbing rubber. Protects windlass from constant chain pull Easily attaches to a loaded anchor chain Constructed of 316L stainless steel highly rust resistant Chain (Ø) inc /16" /8" Anchor Weight Kg ANCHOR ULTRA SELECTION TABLE ACCORDING TO BOAT WEIGHT & LENGTH Sail Boat Power Boat Catamaran Sail Catamaran Weight Catamaran Power Boat Weight Boat Length Boat Weight Boat Length ton m ton m ton Weight ton Boat Length m Recoended DIN 766 Chain Ø ,2 6 1,6 5,5 0, ,7 6,4 1,1 1, ,6 8,6 4,8 8 2,4 3 8, ,3 10,4 4, , , , , , , ,6 17, , ,2 24, , Τ: Ε: export@eval.gr export2@eval.gr

14 GRAPNEL ANCHOR Kg REEF ANCHOR GALVANIZED FOLDING ANCHOR STAINLESS STEEL , Weight Kg Number of prongs- Prong thickness ,6 4 prongs ,2 4 prongs prongs ,2 4 prongs ,6 5 prongs ,8 5 prongs - 12 Kg , FOLDING ANCHOR Wide nail. Hot galvanized steel Kg FOLDING ANCHOR Narrow nail. Hot galvanized steel. Kg , , , , , , , , STAINLESS STEEL ANCHOR Kg , ANCHOR LIFTING SYSTEM The set of the anchor lifting system includes a snap hook, a mooring rope and a stainless steel ring to which is attached the fender (the fender is not included) and follows the line of the anchor. The fender ensures that the lifting will be done smoothly. ANCHOR RESCUE KIT Anchor rescue kit with adjustable releasing load from 20 to 200 Kg. Made of reinforced polymer with fiberglass, adaptable to any type of anchor up to 8 kg, fits any boat up to a maximum length of 8 metres. It always recovers both anchor and line. Durable in sea conditions. Rope Ø Anchor Weight Kg

15 SUGGESTED ANCHORS FOR ANCHORAGE FOR SHORT TIME ANCHORAGE Boat m / Kgr Danforth Anchor Type kg Chain Rope Folding Anchor Bruce Min. Min. length m Min. Min. length* m To 3m 1,5 1, To 4m To 5,5m or 800kg To 6,5m or 1 ton To 7,5m or 2 ton To 9 m or 3 ton To 10,5m or 4,5 ton To 12,5m or 8 ton. 16 7, To 16m or 12 ton To 18m or 16 ton To 20m or 20 ton To 25m or 30 ton To 25m or 30 ton Up 25m or 30 ton * The length of the rope must be at least 3-5 times the depth of the anchorage spot depending on the weather conditions. FOR PERMANENT ANCHORAGE TRIPLE ALL THE ABOVE 130 Τ: Ε: export@eval.gr export2@eval.gr

16 BOW ROLLER Stainless Steel. Length MOORING DEVICE WITH ANCHOR CHAIN LOCK Made of stainless steel 316 polished, hook chain link and unload the windlass For Chain Ø BOW ROLLER Stainless Steel. Suitable for anchors up to 30 kg. ANCHOR ROLLER Stainless steel L 750 x W ANCHOR SAFETY LOCKS For bow rollers codes: 1472, L 570 x W 110 ANODISED ALUMINIUM BOW CLE 999 L 11 x W 7,5 x H 12, L 11 x W 7,5 x H 20 BOW ROLLER Stainless Steel. PLASTIC REEL For bow rollers. Available with its pin for codes 1463, 1464,1465, L 160 x W Ø 37,5 x W 32 COVER FOR HAWSE PIPE Chromed brass. REPLACEMENT FOR BOW ROLLERS Plastic Ø Ø Internal Length , , , Outside Diamensions 427 L 160 x W 110 x H 50 OVAL HAWSEHOLES Made of mirror polished AISI 316 stainless steel Inside Neck max x63 97x x x x x

17 BOW ROLLER BOW ROLLER BOW ROLLER 2338 L 190 x W L 155 x W L 165 x W L 250 x W 60 x H 90 BOW ROLLER 1472 L 280 x W L 340 x W 80 DOUBLE BOW ROLLER For anchors from 8 to 15 Kg L 420 x W 76 BOW ROLLER Suitable for mounting on alouminium cleats. For codes 997, L 155 x W 40 DOUBLE BOW ROLLER With hinge and with safety pin L 225 x W L 330 x W 65 BOW ROLLER Stainless steel with upper safety pin L 135 x W 50, L (total length) 230 DOUBLE BOW ROLLER For anchors from 8 to 15 Kg L 440 x W 78 DOUBLE BOW ROLLER BOW ROLLER A B C Thickness Weight kg Anchor Weight kg 2323 L 330 x W ,6 15 ALUMINIUM BOW ROLLER For anchors up to 12 kg A B C D E L BOW ROLLER WITH CLAMP Stanless steel with built-clamp to secure anchors type BRUCE-DAN- FORTH-FORCE and C.Q.R L 205 x H L 340 x H Τ: Ε: export@eval.gr export2@eval.gr

18 Ø Description Features GALVANISED 1.Hot dip galvanised CHAIN DIN Superior resistance FOR ELECTRIC WINDLASS ΙΝΟΧ HOOK FOR THE EXTRICATION OF DOCKING CHAINS GALVANISED CHAIN DIN 764 STAINLESS STEEL 304 CHAIN DIN 766 FOR ELECTRIC WINDLASS STAINLESS STEEL 316 CHAIN DIN 766 FOR ELECTRIC WINDLASS 1.Hot dip galvanised 2. Superior resistance 1. Superior resistance 1. Superior resistance INOX HOOK FOR EXTRICATION OF DOCKING CHAINS Ideal for smaller boats CHAIN RAINBOW Available in 5 colours: white, yellow, red, blue, green Thickness pcs STAINLESS STEEL ANCHOR CHAIN CONNECTOR With swivel. For chain STAINLESS STEEL ANCHOR CHAIN CONNECTOR With double swivel. For chain SNAP HOOK WITH SCREW OPENING For chain Ø Type Galvanised Galvanised Galvanised Stainless steel Stainless steel Stainless steel STAINLESS STEEL SNAP HOOK WITH SCREW OPENING W 14 x L W 18 x L W 22 x L 69 ANCHOR CONNECTOR Stainless steel 316 For chain

19 Bases combination: Bases Height S + C 375 S + B 400 S + A 425 S + B + C 450 CHAIN BOY STAINLESS STEEL WITH ADJUSTABLE HEIGHT S + A + C 475 Chain boy made of stainless steel with adjustable height. Available with 3 bases of different height. When combined with each other the height of the chain boy is differentiated according to the needs. Base Cap Adjustable height SWIVELS Galvanized. W x L x x x x 154 REVOLVING ANCHOR - CHAIN SWIVELS Designed to help the easy lifting of the chain. EYE AND JAW SWIVELS For chain diameter Length L x x x x 152 SWIVELS W x L x x x x x x x 231 DOUBLE JAW SWIVELS Length L WIRE ROPE CLIPS GALVANIZED STAINLESS STEEL SHACKLES D TYPE Galvanized. USA standard. Ring Pin Τ: Ε: export@eval.gr export2@eval.gr

20 STAINLESS STEEL THIMBLES For rope GALVANIZED Dimen. W x L NYLON THIMBLES For rope SHACKLES D TYPE STAINLESS STEEL W x L STAMPED TWISTED T SHACKLE Stainless Steel AISI 316 stamped Twisted shackle. D L W SHACKLES WITH EMBEDDED PIN, FOR ANCHORS Made of stainless steel; enables the anchor to fit into stem heads without getting tangled x x 19 (A) C x B x x x x x x x x x x x x x x x x x x SHACKLES BOW TYPE GALVANIZED STAINLESS STEEL ANCHOR SHACKLE WITH HEXAGONAL SINK PIN Ø B A , , , ,80 135

21 CLIPS FOR HOSES Pin diameter SHACKLES BOW TYPE Galvanized. USA standard GALVANIZED Length L SNAP HOOKS STAINLESS STEEL Length L SHACKLES LONG D TYPE W x L x x x x LOCKING RINGS SNAP HOOKS WITH INTE- GRAL EYE AND SPRING SNAP HOOKS WITH INTEGRAL EYE AND SPRING Length L Length L Length L SNAP HOOKS WITH INTEGRAL EYE Length L SNAP SHACKLES WITH SPRING SAFETY SNAP HOOKS Aluminium. Length L Τ: Ε: export@eval.gr export2@eval.gr

22 WEBBING SNAP HOOK For canopy strap. Length Strap W 25 BRASS SWIVEL EYE SNAP SHACKLE WITH LEVER OPENING L MAGIC ROPE CLIP SHACKLE INOX W x L x 108 HOOKS FOR INFLATABLE BOAT COVERS Nylon Grey White Black MULTIPURPOSE NYLON HOOK HOOKS FOR ELASTIC ROPES For rope diameter ROPE HOOKS Plastic. For rope diameter NYLON HOOK SWIVEL EYE SNAP SHACKLES W x L x x x x 120 Length Width Distance from hole to hole Length Width Distance from hole to hole ,7 FOLDABLE EYE PLATE INOX Thickness Length ROUND RINGS SWIVEL EYE SNAP SHACKLES WITH SAFETY PIN W x L x x x SWIVELLING HALF-RING Length Width Breaking Load Kg HALF RING For belt 50. Thickness Thickness Inter. Dimens x x

23 Thickness Thickness EYE NUTS PLATES WITH DOUBLE EYES, FIXING WITH FOUR SCREWS RING BOLT-LAG SCREW Thickness Ø x L x x x x 175 EYE BOLTS 297 EYE BOLT INOX EYE PLATES, FIXING WITH FOUR SCREWS Thickness 298* & 302* x x x 50 RING BOLT Total Height ΕΥΕ BOLTS EYE PLATES FIXING WITH FOUR SCREWS Thickness Length Ring cm Screw Height Thickn. Thickness Internal Thickness Β x Thread x Length Ring Type x 60 Closed Ring x 30 x x x x x x x x 40 Screw ,5 17, ,5 Μ10 Open Ring Thickness Length L STAINLESS STEEL FAIRLEAD Thickness STAINLESS STEEL FAIRLEAD DECK U-BOLT ΙΝΟΧ Suitable for fixing nylon belts; made of mirror polished AISI 316 stainless steel. Thickness RING BOLTS Thickness Length L NYLON WEBBING BRIDGES External Length Internal length Height Color ,9 White White 138 Τ: Ε: export@eval.gr export2@eval.gr

24 472 ECONOMY SERIE Ø Breaking load kg Description Features , , , , , , , , , , , , , , POLYESTER TWISTED ROPE OF GOOD QUALITY POLYESTER TWISTED ROPE OF EXCELLENT QUALITY POLYESTER TWISTED ROPE OF EXCELLENT QUALITY POLYESTER TWISTED ROPE OF GOOD QUALITY POLYESTER BRAIDED ROPE WITHOUT CORE OF EXCELLENT QUALITY POLYESTER BRAIDED TWINE FOR ENGINES ELASTIC POLYESTER TWINE 1. Sinkable 2. Good resistance to abrasion 3. Undeformable working 4. White 1. Sinkable 2. With 3 or 4 strands double twisted 3. Good resistance to abrasion 4. Undeformable working 5. Blue 1. Sinkable 2. 3-strand 3. Good resistance to abrasion 4. Undeformable working 5. White 1.Sinkable 2. With 3 strands 3. Good resistance to abrasion 4. Undeformable working 5. Black 1. Sinkable 2. Easy to plait 3. Good resistance to abrasion 4. Undeformable working 5. Blue 1. Suitable for engines 2. Extremely resistant 1. Suitable for all kind of nautical uses 2. Extremely resistant 139

25 W ECONOMY SERIE Ø Breaking load kg Description Features 413-1,5 1, ,5 2, W W , , , , , , , , , , , , , POLYESTER BRAIDED TWINE POLYPROPYLENE BRAIDED TWINE POLYETHYLENE BRADED ROPE POLYESTER BRAIDED ROPE OF EXCELLENT QUALITY POLYESTER BRAIDED ROPE POLYESTER ROPE OF EXCELLENT QUALITY POLYESTER ROPE OF EXCELLENT QUALITY POLYPROPYLENE BRAIDED ROPE ΟF 8 STRANDS Τ: Ε: export@eval.gr export2@eval.gr 1.Suitable for fishing 2. Extremely resistant 3. Sinkable 1. Suitable for all kind of nautical uses 2. Extremely resistant 3. Floating 1. Suitable for ski and inflatable boats 2. Floating 3. High Resistance 4. Eight plates without core 1. Sinkable 2.Good resistance to abrasion 3. Undeformable working 4.Multiple weave 1. Sinkable 2. Good resistance to abrasion 3. Undeformable working 4. Multiple weave 1. Suitable for several uses 2. Sinkable 3. Blue / Red 1. Suitable for several uses 2. Sinkable 3. Red / Blue color red/yellow

26 RD 404BL 404GRE BLUE GREEN RED YELLOW BLACK BLUE GREEN RED YELLOW BLACK BLUE GREEN RED YELLOW BLACK BLUE GREEN RED YELLOW BLACK BLUE GREEN RED YELLOW BLACK BL GRE RD BL GRE RD BL GRE RD BL GRE RD BL GRE RD BL GRE RD BL GRE RD Ø Breaking load kg Description POLYESTER ROPE DOUBLE BRAID 16 SPINDLES EXCEL- LENT QUALITY FOR BOOM SHEET ON BOAT FOR SAILING BOATS ROPES OF EUROPEAN ORIGIN POLYESTER ROPE DOUBLE BRAID 32 SPINDLES EXCEL- LENT QUALITY FOR HALYARDS ON BOAT FOR SAILING BOATS ROPES OF EUROPEAN ORIGIN Features 1.Sinking 2.High toughness with limited elongation 3.Plaited internal core 4. Quite no permanent deformation 5. Smooth texture Color : Blue, Green, Red, Yellow 1. Sinking 2. High toughness with limited elongation 3. Plaited internal core 4. Quite no permanent deformation 5. Smooth texture Color : White with Red, White with Blue, White with Green POLYPROPYL- ENE BRAIDED ROPE OF EXCELLENT QUALITY 1.Suitable for several uses 2. Sinkable 3. High tenacity 4. Packaging box containing 20 bobbins in various colors (box size 32,5 cm x 28,5 cm x 17 cm height) 5. Rope length per bobbin 30 meters Ø10 x L 6m Ø12 x L 6m Ø14 x L 6m Ø16 x L 6m Ø10 x L10m Ø12 x L10m Ø14 x L10m Ø16 x L 0m 3500 POLYPROPYL- ENE BRAIDED ROPE OF EXCELLENT QUALITY MOORING LINE WITH LOOP From polyester. 1.Suitable for several uses 2. Sinkable 3. High tenacity 4. Packaging box containing 20 bobbins in various colors (box size 32,5 cm x 28,5 cm x 17 cm height) 5. Rope length per bobbin 17 meters Navy blue color. 141

27 Ø Breaking load kg Description Features Ø 8 x L 6m Ø 8 x L 10m Ø 10 x L 6m Ø 10 x L 10m BRAIDED MOOR Ø 12 x L 6m Ø 12 x L 12m ING LINE FROM POLYES- White color Ø 14 x L 8m Ø 14 x L 14m 2900 TER Ø 16 x L 10m Ø 16 x L 20m Ø 10 x L 6m 1300 ROPE WITH LOOP AND STAIN- LESS STEEL THIMBLE FROM POLYES- TER Ø 12 x L 6m Ø 14 x L 6m Ø 16 x L 6m Ø 10 x L 30m Ø 12 x L 30m Ø 14 x L 30m Ø 16 x L 30m Ø 10 x L 30m 1600 ANCHOR Ø 10 x L 50m Ø 12 x L 30m Ø 12 x L 50m Ø 16 x L 50m Ø 8 x L 2m Ø 10 x L 2m Ø 12 x L 3m BRAIDED LINE WITH STAINLESS STEEL THIMBLE FROM POLYES- TER. BRAIDED FENDER LINE WITH LOOP FROM POLYES- TER. cm Description SAIL FASTENERS WITH 2 PLASTIC BALLS White color Navy blue color. ANTI-CHAFE COVER Made of PVC ,5 x 28 x ROPE CUTTER 240V W. Available the spare blade blade x 30 x x 54 x 120 SPLICING TOOL, WITH WOODEN HANDLE Made of stainless steel with handle, suitable for splicing Length Max Rope diameter ROPES DISPLAY STAND For the placement of 6 or 9 coils of rope. For the best presentation, as also the most convenient way for you to sell ropes. Coils ANTI-CHAFE PATCH Polyolefin film with a high performance acrylic adhesive. Operating temperature -40 C to 107 C. This application is intended to help prevent wear to vulnerable areas of the boat. Pack contains 4 clear UV resistant sheets on a blue disposable liner Number of Patches L x W micron 2 L 150 x W L 125 x W L 125 x W TERMINAL «FAST END» FOR BRAIDED AND STRAND ROPES It is easily adjusted at the end of the rope just using a heating mean from 6,5 up to 12, from 10 up to Τ: Ε: export@eval.gr export2@eval.gr

28 STERNROLLER Stainless steel case for placing the webbing belt. It is combined with code 3006*. Webbing dimensions Width x Length m x 30 STERNROLLER WITH WEBBING BELT Stainless steel 316 case including the webbing belt. Webbing dimensions W x L m Breaking Load Kg x x x x BRASS BLOCK WITH SINGLE WHEEL 1489 L 65 x W x x x 50 WEBBING BELT It is combined with code 3005*. Polyester webbing belt with UV, suitable for sea conditions. Webbing dimensions Width x Length m STAINLESS STEEL BLOCKS WITH DOUBLE WHEELS AND SWIVEL Breaking Load Kg x x x x Diam. Breaking Load Kg L 103 x W 30 x D L 116 x W 36 x D STAINLESS STEEL BLOCKS WITH SINGLE WHEEL AND SWIVEL STAINLESS STEEL BLOCKS WITH SINGLE NYLON WHEEL AND SWIVEL Diam. Breaking Load Kg L 288 x W 27 x D L 104 x W 35 x D L 143 x W 54 x D Breaking Load Kg L 83 x W 30 x D L 96 x W 36 x D L 130 x W 54 x D L 150 x W 54 x D STAINLESS STEEL BLOCK WITH SINGLE NYLON WHEEL AND FIXED PIN 1483 L 45 x W 25 x D 7 STAINLESS STEEL BLOCK WITH SINGLE PLASTIC WHEEL AND REMOVABLE PIN 1482 L 50 x W 26,5 x D 7 INOX BLOCK WITH SINGLE NYLON WHEEL (Η x W x T) For rope diameter Breaking Load Kg x 22 x Kg x 39 x Kg CHAIN - ROPE ADAPTER Stainless Steel. Chain For Rope m CLIPS FOR ROPES ROPE Hard / Soft

29 STAINLESS STEEL TURNBUCKLES GALVANIZED TURNBUCKLES STAINLESS STEEL TURNBUCKLES MOORING SPRINGS Galvanized Length cm Stainless Steel SHOCK ABSORBER For Rope For Boat m PROTECTIVE COVER FOR ROPES (PAIR) Chafe protection while at the dock, at anchor, on a mooring etc. Suitable for ropes of diameter Guaranteed for problem free years of use. Length cm PLASTIC MOORING SPRINGS For Boat m L 215 x W 39,5 x H 32 L 330 x W 50 x H 36 Up to 5 Up to 10 MOORING SPRING MODEL EXTRA Stainless Steel. Length For Boat m/kg / /13000 CABLE COVERS Protect sails and sheets from chafe. Keep sails clean and prevent wear. The covers split for quick snap-on. Tough, durable plastic with ultraviolet absorber action. Length / Piece cm ANTI-RAT DEVICE Made of durable plastic with UV filter. Maximum diameter of 37cm. It prevents the passage of the rodent through the rope to the boat. Easy application for various size moorings Τ: Ε: export@eval.gr export2@eval.gr

30 NEW SERIES FENDERS FROM EVAL EVAL new series fenders protect the boat when moored to a dock or anchored. These fenders made of strong and durable PVC resist to sea conditions. They are available in a variety of types and sizes suitable for all kind of boats. It is very important that the fenders are inflated to the correct pressure for maximum effectiveness. Normal inflation pressure for fenders at 68 F / 20 C is 0,15bar. However during hot weather the pressure should be decreased by 0,05 bar. It is suggested the fenders to be washed regularly with clean water. For best protection it is advised to use Fender Covers to keep the fenders clean and protected from sun, salt and wear. FENDERS WHITE WITH BLUE CAPS AND DOUBLE EYE EU origin Description Α cm B cm C cm Eye cm Buoyancy * kg Net Weight per Unit kg ,5 0, ,55 White ,7 5 0,8 with Blue Cap , ,3 1,6 FENDERS WHITE WITH DOUBLE EYE White double eye fenders made of durable PVC, high resistance to harsh weather conditions and to the UV sun rays. EU origin Description Α cm B cm C cm Eye cm Buoyancy * kg Net Weight per Unit kg Volume cm ,4 1,5 0, ,4 3 0,5 4,5 Double eye ,4 8 1,1 9, ,7 12 1,3 12 FENDERS BLUE WITH SINGLE EYE Blue fenders made of durable PVC, high resistance to harsh weather conditions and to the UV sun rays. EU origin Description Α cm B cm C cm Eye cm Buoyancy * kg Net Weight per Unit kg Volume cm B Single eye 9, ,4 1,57 0,26 1,57 145

31 INFLATABLE HEAVY DUTY FENDERS DOUBLE EYE These inflatable fenders are heavy duty and extra strong. They are made of P.V.C. with solid ribbed injection moulded ropehold. They have uniform wall thickness with smooth surface and glossy finish. Manufactured for being resistant to extreme sea conditions, high abrasion and sun resistance. The production method ensures the maximum durability and resistance. The eyes are compact and specially reinforced both in its internal and external side. The fenders are produced in a unique procedure that ensures the eyes cannot be ripped off from the rest of the body. They have extra flexible body material and quality plastic valve to secure a perfect seal. Normal inflation measurements pressure 0,15 bar at approximate 20º C temperature. EU origin Description A cm B cm C cm Eye Ø cm Buoyancy Kg Weight Kg White with Blue Cap 790-0BL Black White with Blue Cap 790-1BL Black White with Blue Cap 790-2BL Black White with Blue Cap 790-3BL Black White with Blue Cap 790-4BL Black White with Blue Cap 790-5BL Black White with Blue Cap 790-6BL Black White with Blue Cap 790-7BL Black White with Blue Cap 790-8BL Black White with Blue Cap 790-9BL Black 11, , ,7 1,05 1, , , , ,5 35 4, , , , ,9 146 Τ: Ε: export@eval.gr export2@eval.gr

32 POLYFORM GROUP are a very good choice for the protection of the boat during the mooring. They are available in a big variety of shapes and sizes for boats of all kind and size. A good way to protect them more is to put them in the fender covers that are displayed below. Made in Norway. POLYFORM FENDERS WITH DOUBLE EYE Color Type Α cm Β cm W White F BL Blue F W White F BL Blue F W White F BL Blue F W White F BL Blue F W White F BL Blue F W White F BL Blue F W White F BL Blue F W White F BL Blue F W White F BL Blue F W White F BL Blue F-8 D Eye cm Weight kg ,8 0, , ,5 1, ,8 1, ,5 2,8 2, ,8 2, ,5 2, ,8 4,2 37, ,8 5,3 37, ,8 7,6 SUGGESTED FENDERS FOR BOATS Boat Length m Fender Type -3,10 F01 3,40-5,00 F01/F1 5,20-7,00 F1/F02/F2 7,30-9,20 F2/F3/F4 9,40-13,90 F5/F6 14,00-18,50 F7/F8 Fenders 4201* are available in BLACK color as well upon special request. POLYFORM FENDERS WITH DOUBLE EYE Color Type A cm Β cm D Eye cm Weight Kg W White G BL Blue G W White G BL Blue G W White G BL Blue G W White G BL Blue G5 11,7 40,7 1,3 0,5 14,5 51,5 1,6 0, ,5 2 1,1 21,5 70,5 2,2 1,5 147

33 Color Type Α cm B cm OR Orange A W White A OR Orange A W White A OR Orange A W White A OR Orange A W White A OR Orange A W White A OR Orange A W White A-6 * Maximum buoyancy/suggested Maximum Load kg D Eye cm Weight Kg Buoyancy kg* 29,5 38 2,2 1,15 13,00/7, ,5 2,1 32,00/19, ,5 2,8 3,1 52,00/31, ,8 4,1 90,00/54, ,8 8,3 215,0/129, ,5 11,3 405,0/243,0 SUGGESTED FENDERS FOR BOATS Boat Length m Fender Type 3,40-5,00 Α1 5,20-7,00 Α1/Α2/Α3 7,30-9,20 Α3/Α4 9,40-13,90 Α4/Α5 14,00-18,50 Α5/Α6 Fenders 4202* are available in BLACK color as well upon special request. INLFATED MULTI-PURPOSE POLYFORM BUOYS Used by fishermen all over the world, multi purpose buoys are manufactured with a central flexible tube that is reinforced around the openings. Rotomoulded in one piece, with no seams to rupture, the material is resistant to all weather conditions. Gross Buoyancy Kg Maximum Load Kg Height Hose Weight Kg ,0 17, , ,0 33, , ,0 60, ,3 INFLATABLE ROLLER WITH VALVE Made of PVC. Suitable for small inflatable and rigid boats. EU origin Diam fender Length Boat weight kg INFLATABLE ROLLERS REINFORCED Made of PVC. With reinforced eyes and extremely resistant to punctures. EU origin Length Loading Weight Kg Τ: Ε: export@eval.gr export2@eval.gr

34 INFLATABLE HEAVY DUTY BUOYS Inflatable heavy duty buoys with extra heavy rope eye. They are made of P.V.C. with solid ribbed injection moulded ropehold. They have uniform wall thickness with smooth surface and glossy finish. Manufactured for being resistant to extreme sea conditions, high abrasion and sun resistance. The production method ensures the maximum durability and resistance. The eyes are compact and specially reinforced both in its internal and external side. The fenders are produced in a unique procedure that ensures the eyes cannot be ripped off from the rest of the body. They have extra flexible body material and quality plastic valve to secure a perfect seal. Normal inflation measurements pressure 0,15 bar at approximate 20º C temperature. EU origin Description A cm B cm C cm Eye Ø cm Buoyancy Kg Weight Kg Orange W White BL Black Orange W White BL Black Orange W White BL Black Orange W White BL Black Orange W White BL Black Orange W White BL Black Orange W White BL Black , , , , , ,25 3,

35 MODULAR FLAT FENDERS The flat fenders are made of closed cell polyethylene foam to avoid foam s water absorption and punctures. The flat design keeps them from rolling or riding up. They can be fastened together. Easy storage. Length cm Width cm Thickness cm Weight Kg , , ,87 HEAVY DUTY HIGH LINER HL-BUOY Cylindrical, bullet-shaped POLYFORM HL-buoy is specially designed to reduce drag when used under conditions with strong current. Under some conditions, the HL-buoys can considerably reduce the drag when compared to spherical buoys. Polyform HL fender features the specially designed blue-top ropehold to guarantee the highest breaking strength possible. The HL-buoy is heavy duty buoy used in coercial fishing, aquaculture and a must for the protection of larger recreational crafts and yachts. Color Type 3939 Red with Blue Ropehold Length Eye Weight Kg Maximum Buoyancy Kg/ Recoended Maximum Load Kg HL ,1 30,5 / 18,5 ROUND FENDER COVERS Made of high resistant material they render fenders more longtermed, protecting them by the sun, sea-water and frictions. They are also soft enough to protect the surfaces of the boat by damages. The strap to the ends make them fit excellently on fenders. Color: blue. EVAL Fender Covers POLYFORM US Length Width Type A Type A Relevant EVAL code fender A1 A A2 A * A3 A * A4 A * A5 A * A6 A * A7 A7 Suitable for Fenders POLYFORM SCANMARINE MAJONI CASTRO NORWAY W OR OR W OR W OR W OR W OR W OR W (*) Double thickness Αvailable on special order with Logo or Company Name Type NB Type BUOYS EVAL code for the relevant fenders NB * NB50 MB * NB60 MB * NB75 MB * NB100 MB * NB * NB Τ: Ε: export@eval.gr export2@eval.gr

36 OBLONG FENDER COVERS Made of high resistant material they render fenders more longtermed, protecting them by the sun, sea-water and frictions. They are also soft enough to protect the surfaces of the boat by damages. The strap to the ends make them fit excellently on fenders. Color: blue. EVAL Fender Covers POLYFORM US Suitable for Fenders POLYFORM NORWAY Length Width Type F Type G Type HTM Type F Relevant EVAL code fender Type G Relevant EVAL code fender G2 G BL W G3 HTM-1 G F1 G4 F BL W G BL W F02 G5 F F2 HTM F3 F F4 F F5 G6 HTM3 F F6 F F7 HTM4 F F8 F BL W BL W BL W BL W BL W BL W BL W BL W G BL W BL W Suitable for Fenders EVAL Fender Covers MAJONI DAN FENDER CASTRO CASTRO CLASSIC Length Width Type STAR Type COMBI Type CLASSIC Type HEAVY Type EXTRA classic * star1 combi star2 combi2 classic * 790-2* star2a combi3 classic * 790-4* star star4 classic5 827, * * combi4 classic * Αvailable on special order with Logo or Company Name star * *

37 BOW FENDERS Bow fenders made of PVC. They are specially designed for bow protection. Molded in just one piece with 3 ropeholders, uniform wall thickness, smooth surface and glossy finish. It is equipped with quality plastic valve to secure a perfect seal High abrasion resistance. A cm B cm Eye cm Weight Kg Color ,2 0, ,4 2,25 White 818-1BL ,2 0, BL ,4 2,25 Blue Normal inflation measurements pressure 0,15 bar at approximate 20º C temperature. BOW FENDER A cm B cm Eye cm , ,5 37 0,8 Color White DOUBLE FENDER BRACKETS They can adjust to many angles. Fender diam SINGLE FENDER BRACKET Stainless steel, consisted of two parts and clamps on to vertical rail. Fender diam CLIPS FOR RAIL MOUNT For codes up to and , SINGLE FENDER HOLDER SS Modular system (code 3669 & ) allows to put side by side one or more fender holders. Fender diam BRAIDED FENDER LINE WITH LOOP From polyester. Navy blue color. / m Ø 8 x L Ø 10 x L Ø 12 x L CLIPS FOR JOIN FENDER HOLDERS For codes up to and , MOORING FENDER LOCK KIT PUSH-UP MINI-CLEATS Ideal for coupling fenders or small boats; made of mirror polished AISI 316 stainless steel. Base Hole x x Τ: Ε: export@eval.gr export2@eval.gr

38 DOCK FENDER Can be easily formed to cover corners and bends. Will not deteriorate in the sun, will not mark the boat. Available as a pair. Length m Width Height , DOCK FENDERS BUMPER The dock fenders are made of rotomolded P.V.C. with reinforced and closed holes. Manufactured for being resistant to extreme sea conditions, high abrasion and sun resistance. The dock fender is an important bumper that can be mounted to provide added protection to both the boat and dock. Normal inflation measurements pressure 0,15 bar at approximate 20º C temperature. Description Length cm Width cm Weight Kg Color 737-1W Right angle White 737-1BL 88, Blue 737-2W C-shape to be mounted on docks White 737-2BL with rubber or wooden edge Blue STERN FENDER FOR SAILING BOAT cm Height cm BOW SHIELD PROTECTION Thickness Weight Kg Α Β ,5 0, ,5 0, ,5 0,70 PLASTIC UTILITY DEVICE FOR TYING An utility plastic device specially constructed to facilitate tying to cleats and bollards. A rope (with thickness up to 18 ) can be placed on the guides to the outer side of the device that has an open loop and flexibility to adjust to the size of the cleat or bollard. Pass the loop of the device on the cleat or bollard and then pull it. The rope remains in the desired position. Aluminum pole Length cm 4928 L 320 x W 21,

39 4929 PLASTIC UTILITY DEVICE FOR TYING Plastic hook with aluminium tube to fit in a standard or telescopic pole / handle. It features an automatic device to surround a ring or cleat with a rope attached to a fixture on the end of the device. Available either by itself (code 4929) and it can be combined with aluminum telescopic pole code or with in-built aluminum telescopic pole (code 4965). ALUMINUM POLE It can be combined with code 4929 Length cm Opened Closed SOLID BUOYS EVAL 755-O cm Description 4929 L 24 x Ø2,5 Without aluminum pole 4965 L x Ø2,5 755-Y With aluminium telescopic pole of 120 cm (closed) 220 cm (opened) length RIGID MARKER BUOYS BICONICAL Rigid biconical buoys made of polyethylene. They are specially designed for marking and mooring. They are molded in just one piece with uniform wall thickness, smooth surface and durable ropeholds. cm Height cm Buoyancy kg Color 755-O Orange Y Yellow BICONICAL BUOYS EVAL Plastic, made of blow pressed polyethylene with plastic handle. Length Ø Weight gr Orange Yellow Color Length Ø Eye diam Orange PEAR SHAPED BUOYS EVAL Plastic, suitable for signaling in docking and fishing. Length Ø Weight gr Orange Yellow Orange Yellow BICONICAL BUOYS Plastic, made of blow pressed polyethylene with galvanized center shaft. With polyourethan foam. Length Ø Weight gr Orange GALVANIZED STEEL ROD MOORING BUOY Rigid plastic skin with a Urethane foam core double cone. Galvanized Steel rod mooring buoys. cm Height cm Buoyancy kg Color Red INFLATABLE BUOYS Inflatable buoys made of high quality PVC with strong rope eye, rod and swivel made of hot dipped galvanized steel. They have uniform wall thickness with smooth surface and glossy finish. Manufactured for being resistant to extreme sea conditions, high abrasion and sun resistance. They have extra flexible body material and quality plastic valve to secure a perfect seal. Normal inflation measurements pressure 0,15 bar at approximate 20ºC temperature. INFLATED BUOYS Color Length Ø Eye diam Red Red Red Color Length cm Total Length cm Ø cm Rod Ø Buoyancy Kg Weight Kg , Orange , ,6 154 Τ: Ε: export@eval.gr export2@eval.gr