Mobile 2-Post-Lift FHB 3000

Transcription

1 Mobile 2-Post-Lift FHB 3000

2 Version FHB3000-SL suitable also for vans Free access, doors can be opened, no columns Practical and versatile lifting solution for all types of vehicle for repair and maintenance, indoors and outdoors. Free access to any part of the vehicle, doors can be opened at any height. Maximum safety, double load securing with automatic hydraulical and mechanical locks. Automatic locking swivel arms. Thoroughly reliable, self-lubrication. Hydraulic drive system protected against moisture, dirt and sand. No maintenance required. Easily manoeuvrable by one person Use for washing Accessory: Runways, capacity 2.75 t, Technical data FHB3000 Load support: FHB3000-SS: FHB3000-SL: Lift pad height: Lifting height: Drive-in width: Lifting time: Drive: Connection: Load securing: Travelling device: Protection class: Colour: 3t 4 swivel arms symmetric, mm asymmetric, front mm, rear mm Minimum 110 mm 1850 mm 2000 mm Approx. 40 sec. Electro-hydraulic 400V / 3Ph / 50Hz / 16A Hydraulic and mechanical locks Detachable wheel handle, 2 wheels IP 54 Orange RAL2004

3 Mobile 2-Post Lift FHB 3000 Technical Specifications Capacity 3 t standard 2,75 t with accessory platforms FA3 / ascending device FA-TORO Drive-in width 2000 mm standard 2300 mm special construction with extended width Load support FHB3000-SS: swivel arms, symmetric, mm FHB3000-SL: swivel arms, asymmetric, front mm, rear mm Lifting height 1850 mm standard 1990 mm special construction with extended stroke Speed approx. 40 sec. Drive Electro-hydraulic Motor 2.2 KW Connection 400 V / 3 Ph / 50 Hz, fuse 16 A, standard 230 V / 1 Ph / 50/60 Hz, fuse 16 A, special construction Positioning wheels Dimensions (l x w x h) Weight approx. 900 kg Protection class IP 54 Car lift easy to move with 2 wheels and 1 detachable wheel handle, large wheels Ø 200 mm with sealed roller bearings 2350 x 3050 x 900 mm standard 2350 x 3350 x 900 mm special construction with extended width 2490 x 3050 x 900 mm special construction with extended stroke Height of cross bar: 110 mm (drive through not necessary) Support height: adjustable lift pads, minimal 110 mm Safety features Double load securing by hydraulic check valves and mechanical all position safety locks Automatic synchronization of lifting arms by master-slave cylinder system Mechanical locks of swivel arms Pressure relief valve prevents overloading of the lift Safety standards CE, EN 1493 The speci cations are subject to change without notice /10

4 Mobile 2-Post Lift FHB 3000 Accessory Platforms FA (Art.-No. FHB3000-FA3) Accessory for lift FHB3000-SS and FHB3000-SL Lift FHB3000 to be used with either swivel arms or with platforms. Easy and quick Platforms to be mounted onto swivel arms of the lift. Platforms adjustable in width for di erent wheel tracks. Ideal as inspection lift. Technical data: (car lift with platforms) 2750 kg Access height: 105 mm Width of platforms: 430 mm Length of platforms: 3500 mm Adjustable width: mm (outside dimensions) Weight of platforms: 240 kg The speci cations are subject to change without notice /10

5 Mobile 2-Post Lift FHB 3000 Accessory Ascending Device FA-TORO (Art.-No. FHB FATORO) Use For mowing machines and golf buggies. Accessory for car lift FHB3000-SS-2300 with an extended drive-in width of 2300 mm. Art.-No. of the corresponding lift: FHB3000-SS-2300 Art.-No.FHB Technical data (car lift with FA-TORO 2750 kg Load support: 4 wheel support pads, 370 x 350 mm, adjustable Access height: 100 mm Weight of device: 120 kg Pic. FHB3000-SS-2300 with ascending device FA-TORO Wheel support pads adjustable to suit wheel track and wheel base of the vehicle. Also suitable also for three-wheeledvehicles. Lift FHB3000 can be used either with swivel arms or with ascending device. Easy and quick The speci cations are subject to change without notice /10