we lift cars POST LIFTS

Transcription

1 we lift cars POST LIFTS

2

3 Eco Lift R 1540 R 925 R 620 ACCESSORIES R 1240 Flip-flap support Energy set Door protection

4 Eco Lift kg elecronic control with end switches and permanent monitoring of safety functions drive through width 2485 mm acustic and optic error display permanent monitoring of support nut and automatic switch off in case of maximum permitted wear support arm locking ergonomic operating via foil keyboard automatic switch off in case of lowering on to an obstacle acoustic signal instead of feet protectors plastic mounted swivel arms automatic and manual support arm locking asymmetric swivel arms clearance height only 105 mm three-piece frontal telescopic arm capacity column height total width column-column outside total width column-column inside clearance between suport arms lifting height lifting time swivel arm short three-piece swivel arm long two-piece adjustable area stacking adapter motor output power connector total weight 3500 kg 3056 mm 3540 mm 2795 mm 2485 mm 2000 mm 45 sec mm mm mm 2 x 2,4 kw 400 V, 16 A 530 kg Eco Lift Flip-flap support for Eco Lift 2.35 (4 pc.) Energy set 230V / Compressed air nd operating control for slave column Stacking adapter extension ø 45 x 80 mm Stacking adapter extension ø 45 x 130 mm Stacking adapter ø 130 x ø 45 / mm Stacking adapter U-form ø 130 x ø 45 / mm Protection of patterns and designs for column, lifting wagon, support arm locking, electronical length-measuring system 4

5 Eco Lift (7378) WHEEL ALIGNMENT Sliding plate Standard 1050 mm Air buffered aerone turning plates, for wheel alignment at the highest precision level. System height Size Moving range Weight Capacity Friction with load Air supply min. Working pressure Air consumption 50 mm 440 x 500 mm 100 mm 17 kg 20 kn 0 N 6-8 bar 2-4 bar l(n)/min Sliding plate Precision 1400 mm 5

6 Eco Lift kg drive through width 2845 mm cold-formed surface profi les adjustable ratched laths comfortable operating controls A pneumatically lockable drop-off facility guarantees exact axle measuring and a high degree of safety in the workplace. The functions lifting, lowering and lowering to the drop-off facility can be controlled conveniently via the operating controls. The cold-formed drive surface profi le with integrated slide rails increases the rigidity - not only when using jacking beams. Adjustable ratchet laths in the lifting columns provide for absolutely horizontal alignment of the lift. The maintenance-free lifting cylinder is mounted below the drive surface and thus protected against external forces. Optional wheel alignment kit with sliding plates of 1050 mm or 1400 mm length and air buffered aerone turning plates. Capacity 6500 kg Stroke (incl. wheel alignment) 2040 mm Overall length / with extension 6866 / 7378 mm Overall width 3504 mm Drive-through width 2845 mm Platform height (incl. wheel alignment) 251 mm Platform length 5500 mm Platform width 650 mm Platform spacing 900 mm Wheel base (depending on confi guration) mm Driving power 4 kw Power supply voltage 400 V, 50 Hz Compressed air supply 8-10 bar Lifting time 45 sec System accuracy (vertical deviation) left to right < 0,5 mm front to rear < 1,0 mm diagonal < 1,0 mm Eco Lift 4.65 Lifting unit Eco Lift 4.65 on top of fl oor installation Lifting unit Eco Lift 4.65 fl oor level installation Platform support Eco Lift 4.65 SP Platform support Eco Lift 4.65 SP Präzision Platform support Eco Lift 4.65 aerone SP Platform support Eco Lift 4.65 aerone SP Präzision Platform support Eco Lift 4.65 aerone Scope of supply 4-post lift incl. reinforced platform Wheel alignment kit Drive on ramps and drive on stops Pneumatic jacking beam 2600 kg Integrated air supply for jacking beam LED illumination set optional: fl urebene Version kurze Auff ahrklappen für fl urebenen Einbau 6

7

8 Herrmann AG Bahnhofstrasse 32 D Pösing Sales Phone: +49 (0)9461/ Fax: +49 (0)9461/ Service Phone: +49 (0)9461/ Fax: +49 (0)9461/ June 2016 Amendments and mistakes reserved. All illustrations are not binding. we lift cars