domoflex Electric screw-driven platform IVEN PLATFORM domoflex Electric screw-driven platform VERTICAL MOBILITY ELECTRIC SCREW-DRIVEN PLATFORM

Transcription

1 Electric screw-driven platform IVEN PLATFORM Electric screw-driven platform VERTICAL MOBILITY ELECTRIC SCREW-DRIVEN PLATFORM

2 2

3 3

4

5 16 Rated load 300 kg Capacity up to 4 persons Drive system Screw-driven Speed max 0.15 m/s Power supply 230 Vac, 1 phase Engine 2.2 kw Travel height up to 1,6 meters Landings 2 Entrances opposite or adjacent Noise level Less than 57 db Technical safety equipment Security base, emergency stop buttons inside the platform, emergency stop switches, electronic speed control, electronic control of engine performance. On-board control panel and new button panel 1490 with parapet 1390 with parapet 1490 with parapet 1590 with parapet All measurements are in millimeters. Dimensions are indicative. The content of this brochure can be subject to change without notice. 5

6 6

7 30 Rated load Capacity Drive system Speed Power supply Engine Travel height Landings 2 Entrances Noise level Technical safety equipment 300 kg up to 4 persons Screw-driven max 0.15 m/s 230 Vac, 1 phase 2.2 kw up to 3 meters opposite or adjacent Less than 57 db Security base, emergency stop buttons inside the platform, emergency stop switches, electronic speed control, electronic control of engine performance. On-board control panel and new button panel 1490 with parapet 1390 with parapet 1490 with parapet 1590 with parapet 7

8 8

9 36 Ideal for outdoor and indoor installations Open headroom (H 1600mm) and low door on landing Glazed or blind metal structure Low doors with automatic opening (option) Maximum movement security Pitless Soft-start system Automatic emergency lowering Rated load 300 / 400 / 500 kg Capacity up to 6 persons Drive system Screw-driven Speed max 0.15 m/s Power supply 230 Vac, 1 phase Engine 2.2 / 3 kw Travel height up to 3,6 meters Landings 3 indoor / 2 outdoor Entrances opposite, adjacent or triple (also simultaneous) Noise level Less than 57 db Technical safety equipment Sensitive security edge perimeter, emergency stop button, electronic speed control and overload sensors. Inverter system for the electric motor performance control. Compatibility with European Standards EN81-41 New button panel Available with customized dimensions. min * 1390 ** 1540 * 1640 ** 1340 / 1540 * 1440 / 1640 ** 1440/1540/1640/1740 * 1540/1640/1740/1840 ** 1230 * 1330 ** 1280 * * internal masonry shaft ** external metal structure shaft 1380 ** 1380 * 1480 ** 1480 * 1580 ** 9

10 10

11 90 For the indoor installations Pitless Maximum space optimization Essential shaft structure Basic structure with wide framing (Blind isolated RAL 9010 or glazed) Reduced installation times Can be installed also in the attics Soft-start system Automatic emergency lowering Rated load 300 / 400 kg Capacity up to 6 persons Drive system Screw-driven Speed max 0.15 m/s Power supply 230 Vac, 1 phase Engine 2.2 kw Travel height up to 9 meters Landings 4 Entrances opposite, adjacent or triple (also simultaneous) Noise level Less than 57 db Technical safety equipment Sensitive security edge perimeter, emergency stop button, electronic speed control and overload sensors. Inverter system for the electric motor performance control. EN81-41 Compatibility with European Standards New button panel Available with customized dimensions. min * 1350 ** 1440 * 1500 ** * 1400 ** 1440 * 1500 ** 1230 * 1290 ** 1280 * * internal masonry shaft ** external metal structure shaft 1340 ** 1380 * 1440 ** 1480 * 1540 ** 11

12 12

13 120 Ideal for outdoors Available also without shaft structure Pitless Blind or glazed structure adapted to the geometry of the roof Can be installed also in the attics Soft-start system Automatic emergency lowering Rated load 300 / 400 / 500 kg Capacity up to 6 persons Drive system Screw-driven Speed max 0.15 m/s Power supply 230 Vac, 1 phase Engine kw Travel height up to 12 meters Landings up to 5 Entrances opposite and adjacent Noise level Less than 57 db Technical safety equipment Sensitive security edge perimeter, emergency stop button, electronic speed control and overload sensors. Inverter system for the electric motor performance control. Compatibility with European Standards EN New button panel Available with customized dimensions. min * 1390 ** 1540 * 1640 ** 1340 / 1540 * 1440 / 1640 ** 1440/1540/1640/1740 * 1540/1640/1740/1840 ** 1230 * 1330 ** 1280 * * internal masonry shaft ** external metal structure shaft 1380 ** 1380 * 1480 ** 1480 * 1580 ** All measurements are in millimeters. Dimensions are indicative. The content of this brochure can be subject to change without notice. 13

14 FINISHINGS PLATFORM WALL OUTDOOR: scotch brite stainless steel - - INDOOR: skinplate pre-coated steel INDOOR: scotch brite stainless steel - - O O O PLATFORM FLOOR OUTDOOR: diamond steel plate - - INDOOR: 5 bar aliminium tread plate Ø Ø Ø Ø Ø INDOOR: linoleum INDOOR: round studded rubber Ø Ø Ø Ø Ø CAR OPERATING PANEL scotch brite stainless steel HANDRAIL in semi-polished stainless steel PARAPET FRAME natural aluminium RAL painted PLATFORM DOOR natural aluminium RAL painted aluminium - O MACHINE COVER PANELS skinplate pre-coated steel scotch brite stainless steel - - O O O LANDING DOOR aluminium RAL painted aluminium O O O O O METAL SHAFT RAL painted steel - - CUSTOMIZED SOLUTIONS Automatic platform slide Fixed slide on floor - Ø O O O Manual platform door Manual landing door Motorized landing door O - O O O Push buttons with IP54 protection O O External push buttons on the doors frame External push buttons on plates O O O O O External push buttons on panel O O SAFETY SOLUTIONS Movable anti-crashing bottom Safety perimetral edge - - Emergency stop button on board Personal key for exclusive use O O O O O Emergency lowering device /120 MACHINE COVER PANELS (BL / GL version) LANDING DOOR PLATFORM WALL PLATFORM FLOOR PARAPET FRAME (BL / GL version) LANDING DOOR MACHINE COVER PANELS PLATFORM WALL PLATFORM FLOOR PARAPET FRAME PLATFORM DOOR PLATFORM WALL (BL / GL version) LANDING DOOR PLATFORM FLOOR MACHINE COVER PANELS METAL SHAFT BL / GL version) LANDING DOOR METAL SHAFT (BL / GL version) LANDING DOOR MACHINE COVER PANELS PLATFORM WALL PLATFORM FLOOR standard equipment Ø on request (no extra-price) O on request (optional) - not available 14

15 swing gate manual or motorized Scotch Brite Mirror Diamond steel plate Silver anodized 5 bar tread plate Beige Red Ink blue Dark grey Black G804 Light grey G805 Dark grey N004 Black A1 White A13 Beige RAL1015 Light ivory RAL3003 Ruby red RAL6005 Moss green RAL7016 Anthracite grey RAL7035 Light grey RAL9010 Pure white Gothic gray N1 Light grey N4 Dark grey B1 Light blue R2 Red V1 Green F41PPS Stainless look PPS10 Marble PPS31 Marine blue RAL Coating (AreaLift range) 15

16 AREALIFT S.r.l. Via Caduti del Lavoro, Bogolese di Sorbolo (Parma), Italy tel fax BR.COM.A001_EN_rev.1 Autorized Seller of VERTICO Group ELECTRIC SCREW-DRIVEN PLATFORM All rights reserved. No part of this publication may be reproduced or transmitted, by any term or by any means, without the prior permission of the VERTICO Group who holds the copyright. The products shown and the data reported are purely indicative and may be subject to modification without notice.