Technical Manual. Positive displacement lobe pump. Serie C - CF. Translation of the original instructions
|
|
|
- Jodie Patterson
- 5 years ago
- Views:
Transcription
1 Technical Manual Positive displacement lobe pump Serie C - CF Translation of the original instructions all the power with a delicate touch T.M. C-CF Series rev.1 05/2012 All rights reserved O.M.A.C. S.R.L. RUBIERA (RE) - ITALY 1
2 Copyright by O.M.A.C. s.r.l. Via Giovanni Falcone, RUBIERA (RE) ITALY Printed directly by the Company Revision 1 - May
3 Summary Technical features of the C CF Series pump... pag. 5 Curves of performance... pag C100 with gear rotor in AISI 316L and standard tolerance (LI-ST) code 8... pag. 7 C110 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0... pag. 8 C115 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0... pag. 9 C115 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1... pag. 10 C220 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0... pag. 11 C220 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1... pag. 12 C270 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0... pag. 13 C270 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1... pag. 14 C325 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0... pag. 15 C325 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1... pag. 16 C330 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0... pag. 17 C330 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1... pag. 18 C390 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0... pag. 19 C390 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1... pag. 20 C570 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0... pag. 21 C570 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1... pag. 22 3
4 4
5 Technical features of the C CF Series pump The table below shows the nominal features of the various dimensions of the pumps. The data that make up the table refer to the pump model, the capacity that each pump model (100, ) elaborates every 100 revolutions, the maximum operation speed of each pump size, the differential operating pressure, expressed in bar, and the standard dimensions of the opening couplings, expressed in millimetres and inches. MODEL PUMP THEORETIC FLOW-RATE MAXIMUM SPEED MAXIMUM POWER MAXIMUM OPERATING PRESSURE (bar) STANDARD CONNECTIONS lt/100 rpm rpm kw ST standard clearance with shafts in AISI 630 SM increased clearance with shafts in AISI 630 DN INCHES C C C C C C C C C A section of C220 Series pump 5
6 6
7 C100 with gear rotor in AISI 316L and standard tolerance (LI-ST) code 8 7
8 C110 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0 8
9 C115 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0 9
10 C115 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1 10
11 C220 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0 11
12 C220 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1 12
13 C270 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0 13
14 C270 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1 14
15 C325 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0 15
16 C325 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1 16
17 C330 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0 17
18 C330 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1 18
19 C390 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0 19
20 C390 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1 20
21 C570 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0 21
22 C570 with 4-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 1 22
23 C570 con rotore trilobo in AISI 316L e tolleranza standard ST - codice 5 23
24 C570 with 3-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 5 24
25 C570 with 3-lobe rotor in AISI 316L and increased tolerance (LI-SM) code 6 25
26 Organismo accreditato da ACCREDIA Body accredited by ACCREDIA 26 Via Giovanni Falcone, Rubiera (RE) - Italy Tel.0522/ Fax 0522/ :2008 info@omacpompe.com 8, Giovanni Falcone SitoWeb: Rubiera (RE) - Italy Tel.+39(0)522/ Fax +39(0)522/628980
Manual AGM 95/1-190/2-380/4. Tekniske data. AGM. Pricelist
Manual AGM 95/1-19/-3/ Tekniske data. AGM Lobe Rotor Pumps A Pricelist L Q M H N B Optimized Performance Chart AGM 95/1-19/ - 3/ 1 9 7 Pressure (bar) 5 3 1 1 3 5 7 9 1 11 1 13 1 AGM 95/1 Flow m 3 / hour
60Hz HORIZONTAL MULTISTAGE PUMPS
6Hz HORIZONTAL MULTISTAGE PUMPS INDEX EH Stainless Steel Horizontal Multistage Pump................................................................ 2 General Product Curves..................................................................................
monobloc lobe pumps BE series AUT. N 810 EDIZ. 11/02
monobloc lobe pumps BE series AUT. N 810 EDIZ. 11/02 STANDARD VERSION The BE SERIES Lobe Pumps derives from the well-known B series pump since it shares several of its characteristics. The AISI 316 L stainless
5" SUBMERSIBLE PUMPS _ed.12/2014. Single member - Company subject to the control and coordination of Franklin Electric Co., Inc.
Vertical S.r.l. via Asolo, 7 36031 Dueville (Vicenza) - Italy Tel. +39 0444 361114 Fax +39 0444 365247 P.IVA e C.F. 00558130241 e-mail: sales@vertical.vi.it www.etechpumps.com Single member - Company subject
ELECTRIC SUBMERSIBLE PUMPS SEMISOM/80
Electric pumps for professional applications to convey sewage water, entirely designed and manufactured in our Italian facility. APPLICATION PERFORMANCE RANGE To convey waste and sewage water from septic
RE 91808/ AA4VSE Plug-in dual displacement motor. High pressure range. Series 10 Axial piston swashplate design, SAE model
AA4VSE Plug-in dual displacement motor Series Axial piston swashplate design, SAE model RE 91808/09.90 RE 91808/09.90 Brueninghaus Hydromatik Size 250 Nominal pressure 350 bar Peak pressure 400 bar High
STANDARD ONDUFIL TM MULTI-TURN SPRING WASHER RANGE
per turn RD0223S320025IX 22.0 18.0 2.0 x 0.25 3.5 3 5.8 3.0 4.0 1.4 RD0223S420025IX 4 7.8 4.0 4.0 1.0 RD0223S520025IX 5 9.6 4.3 4.0 0.7 RD0223S620025IX 6 11.0 5.0 4.0 0.7 RD0223S720025IX 7 12.7 5.8 4.0
HORIZONTAL MULTISTAGE PUMPS
ORIZONTA MUTISTAGE PUMPS INDEX E Stainless Steel orizontal Multistage Pump.... 2 General Product Curves.... 3 Material Table... 3 Table of hydraulic performances at - E 3-5 - 9...........................................................
The pumping action of the B series lobe displacement pump is achieved thanks to the counter-rotation of
INDUSTRY APPLICATION Rotary lobe pumps type B are positive displacement pumps for liquids of any viscosity with lubricating and non-lubricating properties. Lobe pumps are used in the chemical, pharmaceutical
Lightweight, compact, ergonomic, safe POLARIS FID. Portable TOC Analyser for Stack Emissions
Lightweight, compact, ergonomic, safe POLARIS FID Portable TOC Analyser for Stack Emissions The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe POLARIS FID" analyser realized by
Reciprocating compressor diagnostics
makes it possibile to monitor the condition of the machine and to detect any malfunctions or changes in behaviour. Diagnostics can be carried out with both a preventive and an analytical function helping
SUBMERSIBLE ELECTRIC PUMPS FOR FOUL WASTE WATER (SINGLE CHANNEL) in cast iron
Submersible electric pumps for foul water. APPLICATIONS Evacuation of civil and industrial waste water Effluent treatment Draining underground areas Handling fluids containing suspended solids / filaments
Operation and Maintenance Manual
Rev.4 del 01/2011 Operation and Maintenance Manual BA and BB Series size 100 105 110 115 215 220 325 330 390 430 440 470 490 BF Series size 100 105 110 115 215 220 325 330 Lobe Positive Displacement Group
CHEMICAL PUMPS SINCE 1992 GENERAL CATALOGUE 2018/19
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2018/19 MAG-DRIVE ROTARY VANE S SEAL-LESS MAG DRIVE VANE S In seal-less magnetic drive vane pumps, the external magnet is directly connected to the motor shaft and
real quality made in italy circulation pumps
GB real quality made in italy circulation pumps real quality made in italy E N E R G Y S A V I N G P U M P S PUMPING TECHNOLOGY Due to the diversity of nominal diameters, body lengths and speeds our extremely
- CONSTRUCTIONS 300 SECTIONAL VIEW (4N1 4N2 4N4) 300 SECTIONAL VIEW (4N7 4N10 4N15) 301 SECTIONAL VIEW TABLE 302 ITEM QUANTITY FOR MODEL 303
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 TYPE KEY 203 PERFORMANCE CHART 4N1 204 PERFORMANCE CHART 4N2 205 PERFORMANCE CHART 4N4 206 PERFORMANCE CHART 4N7
GENERAL INFORMATION THE BUSINESS STRATEGY IS CONCENTRATED ON: THE PRODUCT RANGE CONTAINS PUMPS FOR:
GENERAL INFORMATION SIVAG Pumpen Ges.m.b.H. is primarily concerned with manufacturing and distributing of pumps for many years. Basically the products are used for industrial purposes. Since 1989 the head
Certificate No. EHEDG-C
Powered by TCPDF (www.tcpdf.org) Date of issue: 4 December 2018 Valid until end: December 2020 el@c ャ ウウ @i EHEDG hereby declares that the product Lobe Positive Displacement Pump, type C series with EPDM
Circulation pumps BFP-ATEX-T3/T4
Circulation pumps BFP-ATEX-T3/T F ATEX - range of use: to zone 1 and zone 1 T3 to zone 1 and zone 1 T Low noise emission High vol. efficiency Optimum suction Gerotor principle Resistant to contamination
TPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Technical specifications. Wind Turbine GS 21 S. Power 60 kwp
Technical specifications Wind Turbine GS 21 S Power 60 kwp GS 21 S - 60 kwp The best wind turbines, without compromise. In order to exploit the kinetic energy contained in the wind and convert it into
DICHIARAZIONE CE EC DECLARATION
www.omcsrl.com DICHIARAZIONE CE EC DECLARATION DataDate: OMC s.r.l. - Via Galileo Galilei, 18-20060 - Cassina dé Pecchi (MI) - ITALY Dichiara che le valvole a globo Declare that the globe valves Tipo -
Hygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
SQ kW V 50/60Hz 70M
GRUNDFOS DATA BOOKLET SQ 1-14 1.68kW 2-24V 5/6Hz 7M Grundfos pump 96524442 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sqc1/96524442/sq-1-14.html
OUR POWER, YOUR SATISFACTION OIL & GAS INDUSTRY. Pag.1 10/05/2017 NR_BCH_EN_021 R00
OUR POWER, YOUR SATISFACTION OIL & GAS INDUSTRY Pag.1 10/05/2017 NR_BCH_EN_021 R00 OIL & GAS INDUSTRY. The need of Oil and Gas production becomes more and more interesting, as the consumption in countries
SQ kW V 50/60Hz
GRUNDFOS DATA BOOKLET SQ 5-7 1.85kW 2-24V 5/6Hz Grundfos pump 9651217 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sqc5/9651217/sq-5-7.html
CRN5-8 A-P-G-V-HQQV 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-8 A-P-G-V-HQQV 3x23/4 5HZ Grundfos Pump 96517266 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn5/96517266/crn-5-8-a-p-g-v-hqqv.html
CRI1S-25 A-P-I-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CRI1S-25 A-P-I-E-HQQE 1x22/24 HZ Grundfos Pump 9654847 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri1s/9654847/cri-1s-25-a-p-i-e-hqqe.html
SQ kW V 50/60Hz 10m
GRUNDFOS DATA BOOKLET SQ 2-55.7kW -24V 5/6Hz m Grundfos Pump 965244 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sqc2/965244/sq-2-55.html
CRN1S-21 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN1S-21 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96515918 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/96515918/crn-1s-21-a-fgj-g-e-hqqe.html
DML - DMLF. SUBMERSIBLE SEWAGE PUMPS (SINGLE-CHANNEL) in cast iron. Your Life, our Quality. Worldwide. 67 Wastewater APPLICATIONS TECHNICAL DETAILS
APPLICATIONS TECHNICAL DETAILS TECHNICAL DATA 40 mm (DMLF) DN50, DN55, DN65 (DMLF) MATERIALS ACCESSORIES (ON REQUEST) PUMP IDENTIFICATION CODE 80 DML DMLF 5 2,2 50 HZ 2,2 3,7 5,5 7,5 11 15 22 MODEL OUTPUT
GRUNDFOS DATA BOOKLET NS, PF. 50 Hz
GRUNDFOS DATA BOOKLET 50 Hz Table of contents 1. PF 3 General description 3 Features 3 Constructional features 3 Material specification 3 Marks 3 Technical data 4 Performance curves 4 Dimensions 5 Product
CRN1S-30 A-P-G-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CRN1S-3 A-P-G-E-HQQE 1x22/24 5HZ Grundfos Pump 96533335 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/96533335/crn-1s-3-a-p-g-e-hqqe.html
franklinwater.eu 50 HZ EH - EHsp SERIES HORIZONTAL MULTISTAGE AND SELF-PRIMING PUMPS
franklinwater.eu 5 HZ EH - EHsp SERIES HORIZONTAL MULTISTAGE AND SELF-PRIMING PUMPS INDEX Stainless Steel Horizontal Multistage (EH) and Self-Priming (EHsp) Pumps 2 Family curves 3 Pump identification
CRNE15-12 A-FGJ-G-V-HQQV 3x HZ
GRUNDFOS DATA BOOKLET CRNE15-12 A-FGJ-G-V-HQQV 3x4 6 HZ Grundfos Pump 96514555 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crne15/96514555/crne-15-12-a-fgj-g-v-hqqv.html
since 1928 ALBIN PUMP MG Rubber lobe pump Datasheet
since 192 LIN PUMP MG Rubber lobe pump Datasheet DTSHEET MG2 Model Flow Max differential Min. speed Max speed Max. flow Max power l/1 rev. pressure bar R.p.m R.p.m l/min. req. kw MG2 23 5 1 1 23 4. 5 Weight
Selection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page - SPECIFICATIONS 200-201 SELECTION CHART 202 SELECTION CHART TABLE 203 TYPE KEY AND CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
DW-DW VOX. Submersible Sewage Pumps. cod REV. 01/05. notice: all specifications could be subject to change
cod. 479705360 REV. 01/05 EBARA PUMPS EUROPE S.p.A. reserves the right to make modifications without prior notice: all specifications could be subject to change 007Q_DWDW VOX GB dep 18012005 17:10 Pagina
CRN15-09 A-P-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN15-9 A-P-G-V-HQQV 3x/69 5 HZ Grundfos Pump 9652 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn15/9652/crn-15-9-a-p-g-v-hqqv.html
SUBMERSIBLE SEWAGE PUMPS WITH SEMI-VORTEX IMPELLER in cast iron
Submersible sewage pumps with semi-vortex impeller APPLICATIONS Ideal for waste waterapplications containing soft or fibrous solids Industrial waste water drainage Septic effluent Miscellaneous drainage
CR10-07 A-FJ-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR1-7 A-FJ-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651216 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9651216/cr-1-7-a-fj-a-e-hqqe.html
EH -EHsp SERIES 50 Hz
PRODUCT CATALOG EH -EHsp SERIES 5 Hz HORIZONTAL MULTISTAGE AND SELF-PRIMING PUMPS franklinwater.eu INDEX STAINLESS STEEL HORIZONTAL MULTISTAGE (EH) AND SELF-PRIMING (EHsp) PUMPS... 2 Family curves...3
WINNER SUBMERSIBLE MULTISTAGE PUMPS EPA
CONTENTS SPECIFICATIONS Page Features & Applications 100 E xploded View 101 Pump & Motor Specifications 102 Selection Charts 103, 104 Type key 105 PERFORMANCE CURVES Performance Curve 4N1 200 Performance
TG 150 G8V TX 86 (Dwg. No /xx)
TECHNICAL SPECIFICATION ENGINE TYPE TG 150 G8V TX 86 1/7 Description: Engine type TG 150 G8V TX 86 (Dwg. No. 7000 850/xx) Fuel natural gas (according to TEDOM: 61 0 0282.1 regulation) Engine design stationary
CRN15-12 A-P-G-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN15-12 A-P-G-E-HQQE 3x/69 5 HZ Grundfos Pump 9651956 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn15/9651956/crn-15-12-a-p-g-e-hqqe.html
FLUOR-O-FLO Dip Pipes & Spargers. PTFE Lined and Jacketed Steel
MICROMOLD TM ENGINEERED PLASTIC FLUID-FLOW PRODUCTS Product Specifications 5.1-2 FLUOR-O-FLO Dip Pipes & Spargers PTFE Lined and Jacketed Steel CONTENTS PAGE DDF Double d Dip Pipes... 2 DSF Single d Dip
Japanese Technology since Ego Circulators. Databook
Japanese Technology since 1912 Ego Circulators Databook Japanese Technology since 1912 www.ebaraeurope.com INDEX Ego Range GENERAL INTRODUCTION THREADED CIRCULATORS THREADED/FLANGED CIRCULATORS FLANGED
The best performing filter. The protector of Disinfection Systems
The best performing filter according to IMO requirements NO COMPETITION NO WEAKNESSES MANY ADVANTAGES No other filter on the market is able to match or even come close to the performance of the ACB filter
CRI10-14 A-FGJ-I-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRI1-1 A-FGJ-I-E-HQQE 3xD 5 HZ Grundfos Pump 96512 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri1/96512/cri-1-1-a-fgj-i-e-hqqe.html
316 Stainless Steel Submersible Pumps 8" 10" 12"
316 Stainless Steel Submersible umps 8" 10" 12" Stainless Steel Submersible umps 40 to 540 m 3 /h The FS Series pumps have been engineered in all AISI 316 stainless steel for efficient and reliable pumping
Page - DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 2-3 IMPELLERS ) 204 PERFORMANCE CURVE 3 ( 4-5-6 IMPELLERS )
The Experimental Study of the Plateau Performance of the F6L913 Diesel Engine
Sensors & Transducers 2013 by IFSA http://www.sensorsportal.com The Experimental Study of the Plateau Performance of the F6L913 Diesel Engine 1 Weiming Zhang, 2 Jiang Li 1, 2 Dept. of Petroleum Supply
in cast iron Your Life, our Quality. Worldwide. 65 Wastewater Submersible sewage pumps ( single-channel) in cast iron
Submersible sewage pumps ( singlechannel) APPLICATIONS Evacuation of civil and industrial waste waters Treating liquid manure Draining sublayer zones Generally moving foul waste liquids also containing
ISO 6022 INTERNATIONAL STANDARD. Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
INTERNATIONAL STANDARD ISO 6022 Second edition 2006-02-01 Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series Transmissions hydrauliques Dimensions d'interchangeabilité
SUBMERSIBLE SEWAGE PUMPS (GRINDER) in cast iron
SUBMERSIBLE SEWAGE PUMPS (GRINDER) Submersible sewage pumps with open impeller and grinder device inlet APPLICATIONS Evacuation of civil and industrial waste waters Moving foul waste water with filamentary
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
* * Data sheet DA01 VUW (ATEX) Differential pressure measuring device Pressure levels PN250/PN400. Models for use in explosive areas
09015037 DB_EN_DA01_VUW_ATEX Rev. ST4-A 02/18 *09015037* Data sheet DA01 VUW (ATEX) Differential pressure measuring device Pressure levels PN250/PN400 Models for use in explosive areas DA01... 0A DA01...
PETROL INSTRUMENTS S.r.l. - ITALY P D F L O W M E T E R S L P G M E T E R I N G I N D E X
Sheet n. 71 DOC. LQP/GPL-02/E PETROL INSTRUMENTS S.r.l. - ITALY P D F L O W M E T E R S L P G M E T E R I N G I N D E X 1. LPG HANDLING C/O LIQUIPIBIGAS S.p.A. - LEGHORN 2. FISCAL METERING STATION - PIPING/EQUIPMENT
SCULTOROB IS A 7 AXIS ROBOTIC MILLING AND CARVING SYSTEM FOR MARBLE, GRANITE, AND NATURAL STONE SURFACES.
RELIABILITY Reliability is crucial to any manufacturing process. ScultoRob was designed and engineered to tolerate extreme working conditions and withstand continuous production cycles. Applications are
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 1506 203 PERFORMANCE CURVE 2006 203 PERFORMANCE CURVE 3006 203 PERFORMANCE CURVE 4006 203
SB,SBI,SBN 1,3,5,10,15,20,32,45,64,90,120,150 series
SB,SBI,SBN 1,3,5,10,,20,32,45,64,90,120,0 series 1 2 3 4 5 6 7 8 9 at Nameplate information Mechanical Seal, Minimum inlet pressure - NPSHA Motor Data Max. Operating Pressure and Inlet Pressures Pumped
SB,SBI,SBN 1,3,5,10,15,20,32,45,64,90,120,150 series
SB,SBI,SBN 1,3,5,,,,32,45,64,90,1,0 series 1 2 3 4 5 6 7 8 9 11 Nameplate information Mechanical Seal, Minimum inlet pressure NPSHA Motor Data Max Operating Pressure and Inlet Pressures Pumped Liquids
- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 300 203 PERFORMANCE CURVE 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.50 203 PERFORMANCE CURVE 0.80 204 PERFORMANCE CURVE 1.00 205 PERFORMANCE
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL HYDRAULIC AND PNEUMATIC MOTORS. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL HYDRAULIC AND PNEUMATIC MOTORS This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed
PERMANENT MAGNETIC COUPLINGS
PERMANENT MAGNETIC COUPLINGS GMDO-00970 11/08 Metau Engineering srl Page 1 of 10 General description The GMDO is a permanent-magnetic coupling that transmits torque through magnetic forces between the
Corrosion Resistant Fiberglass Submersible Pumps. EU product Made in Italy
EU product Made in Italy Corrosion Resistant Fiberglass Submersible Pumps ARGALSUB - SUBMERSIBLE PUMPS IN COMPOSITES Argal proposes in this catalog its new range of submersible pumps made in Fiber Reinforced
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
DW Pumps Value for money
DW Pumps Value for money The DW Range The DW pump from APV is designed for ultra hygienic applications. The range consists of 31 models with capacities ranging from 3 litres /100 revs to 1,016 /100 revs
PAHT pumps / PAHT G pumps / ATEX PAHT G pump
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Data sheet PAHT 2-308 pumps / PAHT G 2-308 pumps / ATEX PAHT G pump danfoss.high-pressurepumps.com Table of Contents
The best performing filter. The protector of Disinfection Systems
FILTREX ACB The best performing filter according to IMO requirements NO COMPETITION NO WEAKNESSES MANY ADVANTAGES No other filter on the market is able to match or even come close to the performance of
APV PUMPS. DW Series POSITIVE DISPLACEMENT PUMPS
APV PUMPS DW Series POSITIVE DISPLACEMENT PUMPS Engineering excellence, allied to stringent quality control, ensures that SPX FLOW s unrivalled range of APV products complies with the highest international
Nozzle band heaters MODEL Z.11 (BRASS) MODEL Z.15 (STEEL) MODEL Z.17 (STEEL/PLUS) MODEL Z.19 (STEEL) MODEL Z.20 (CERAMIC) MODEL Z.
... Infinite solutions... Nozzle band heaters MODEL Z.11 (BRASS) MODEL Z.15 (STEEL) MODEL Z.17 (STEEL/PLUS) MODEL Z.19 (STEEL) MODEL Z.20 (CERAMIC) MODEL Z.122 (MAXI) Index 2 4 6 9 11 13 15 19 Model Z.11
Our thru-tubing motors deliver performance right where you need it. Downhole.
Our thru-tubing motors deliver performance right where you need it. Downhole. Delivering Downhole Performance 1 11/16 5-6 2.3 Stg EVEN WALL MOTOR SPECIFICATIONS 1 11/16 5-6 2.3 Stg EVEN WALL MOTOR SPECIFICATIONS
DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS
DM 6 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 7 m 3 /h Max head 8, m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity
Butterfly valves PN 16
s 4 119 ACVATIX TM Butterfly valves PN 16 VKF42.. Gray cast iron or nodular cast iron valve body DN 50...600 k vs 65...37,000 m 3 /h For fitting with PN 16 counter-flanges to ISO 7005 Tight-closing in
Hydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
Data Sheet PM Generator Kit version K535S-4-11 K535S-4-12 K535S-4-14 K535S-4-17 K535S-4-22
Data Sheet PM Generator Kit version -11-12 -14-17 -22 HIGH THERMAL CLASS HIGH EFFICIENCY RELIABILITY DESIGNED AND MANUFACTURED IN FRANCE OPTIMISED INTEGRATION HIGH QUALITY SAMARIUM COBALT MAGNETS This
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
SUBMERSIBLE ELECTRIC PUMPS FOR FOUL WASTE WATER (VORTEX) in cast iron
) Submersible electric pumps for foul waste water, cast iron. APPLICATIONS Evacuation of civil and industrial waste water Effluent treatment Draining underground areas Handling fluids containing suspended
In-Line Dry Rotor Circulating Pumps. EIL R Series EIL- FK Series
EIL R Series EIL- FK Series ETNA Experience Environment Friendly Engineering Exact Answer to Your Need With our R&D, production and installation experience of more than 3 years in the pump technologies
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
DRS. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE /A40-115-1.1M, /A40-140-1.1M, /A40-136-1.1M, /A40-150-1.8M 203 PERFORMANCE CURVE /A40-136-1.4,
Reproduction. Not for. HandyGen 2500A. Illustrated Parts List
Illustrated Parts List HandyGen 2500A Model Mfg. No. Description 030388-0 HandyGen 2500A EU 030390-0 HandyGen 2500A UK 030391-0 HandyGen 2500A AU Manual Part No. 103924GS Revision B Rev. Date: 2/15/2012
Mould Hydraulic Systems. Self-locking rod hydraulic cylinders 260 bar V260LK V260LK
Mould Hydraulic Systems Self-locking rod hydraulic cylinders 260 bar V260LK V260LK V260LKcat.GB01-2006 Self-locking rod hydraulic cylinders General Characteristics - Max. working pressure: up to 260 bar
DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS
DM 6 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 7 m 3 /h Max head 8, m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity
PV Series Vane Truck Pumps
PV Series Vane Truck Pumps ISO 900-008 PV Series Pumps General Introduction Versa vane truck pumps are specifically designed to comply with the pumping requirements demanded by the LPG industry. Bulk delivery
CMB-SP 5-28 I-C-A-C-B-A
GRUNDFOS DATA BOOKLET CMB-SP 5-28 I-C-A-C-B-A Grundfos pump 9857579 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbsp/9857579/cmb-sp-5-28-i-c-a-c-b-a.html
DRAFT VTS Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: Mini 2009-2013 Cooper S JCW This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
Lecture 11 HYDRAULIC MOTORS [CONTINUED]
![Lecture 11 HYDRAULIC MOTORS [CONTINUED]](/thumbs/71/66190666.jpg "Lecture 11 HYDRAULIC MOTORS [CONTINUED]")
Lecture 11 HYDRULIC MOORS [CONINUED] 1.12Performance of Hydraulic Motors he performance of hydraulic motors depends upon many factors such as precision of their parts, tolerances between the mating parts,
CALEFFI. Direct supply unit for heating systems. 165 series 01237/17 GB. replaces dp 01237/15 GB. Function
Direct supply unit for heating systems 65 series ACCREDITED ISO 9 FM 65 CALEFFI 7/7 GB replaces dp 7/5 GB Function The direct supply unit performs the function of supplying the heating system circuits
CMB-SP 1-54 I-C-A-C-C-A
GRUNDFOS DATA BOOKLET CMB-SP 1-54 I-C-A-C-C-A Grundfos pump 98507610 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbsp/98507610/cmb-sp-1-54-i-c-a-c-c-a.html
ZLM Supplementary Agreements for the Supply of High-Voltage Electric Motors for Use in Power Plants
ZLM Supplementary Agreements for the Supply of High-Voltage Electric Motors for Use in Power Plants VGB Technical Association of Large Power Plant Operators VGB-R 160 e Edited by Vereinigung Deutscher
Eurovacuum EVR Series
Eurovacuum EVR Series Roots Vacuum Pumps Eurovacuum EVR Series Roots Vacuum Pumps Eurovacuum Company is offering its various products to meet industrial vacuum needs. Eurovacuum Company is founded in 2006,
CRN3-3 A-FGJ-G-V-HQQV 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN3-3 A-FGJ-G-V-HQQV 3x23/4 5HZ Grundfos Pump 9651685 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn3/9651685/crn-3-3-a-fgj-g-v-hqqv.html
5" SUBMERSIBLE PUMPS. by Franklin Electric
5" SUBMERSIBLE PUMPS INDEX NAUTI VN 5" Submersible Pumps... 2 General Product Curves... 3 Material Table... 3 Technical Data and Performance Curves VN 3..................................................................................................
Variable Displacement Pump A4VG for closed circuits
RE 92 003/05.99 RE 92 003/05.99 replaces: 02.98 Variable Displacement Pump A4VG for closed circuits Sizes 28...250 Series 3 Nominal pressure 400 bar Peak pressure 450 bar A4VG...EP Index Features 1 Ordering
CRI3-6 A-FGJ-I-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRI3-6 A-FGJ-I-E-HQQE 3x23/4 5HZ Grundfos Pump 96527892 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/cri3/96527892/cri-3-6-a-fgj-i-e-hqqe.html