Manual AGM 95/1-190/2-380/4. Tekniske data. AGM. Pricelist
|
|
|
- Chrystal Daniel
- 6 years ago
- Views:
Transcription
1 Manual AGM 95/1-19/-3/ Tekniske data. AGM Lobe Rotor Pumps A Pricelist L Q M H N B
2 Optimized Performance Chart AGM 95/1-19/ - 3/ Pressure (bar) AGM 95/1 Flow m 3 / hour AGM 19/ AGM 3/ Optimized Performance Chart AGM 95/1-19/ - 3/ Pressure (bar) AGM 19/1 ED Flow m 3 / hour AGM 3/ ED The optimized performance chart applies to water, and should be considered as guidance only. All prices are retail prices exclusive VAT Subject to change without notice April 1
3 Pumps Bare shaft pump Pump with NBR lobes and hardened steel wear parts Unit Pump mounted on standard frame with gear and electric motor Hydraulic Pump with hydraulic operation Options Stainless steel wear parts Viton lobes Extreme Duty Wear linings, wear plates, clamps and bolts for clamps/wearplates made of AISI 31 stainless steel. Lobes made of heat resistant viton (max. 1º Celcius) Lobes and shafts designed for high performance Relief valve system Safety valve with flanges Heat sensor All prices are retail prices exclusive VAT Subject to change without notice April 1
4 1 9 Performance Curve for AGM 95/1 (water) 1 Rpm 15 Rpm Rpm Pressure (Bar) Rpm 3 Rpm 35 Rpm Rpm 5 Rpm 5 Rpm 55 Rpm Rpm Flow m 3 /hour Pressure (bar) Power Consumption Table (kw) for AGM 95/ Pump Operation RPM AGM 95/1 Item No. Unit Price EUR Bare shaft pump 355 3, kw unit ,7.-. kw unit 595 5,5.- 3 kw unit 5953,39.- kw unit 595, kw unit , kw unit 59575, kw unit 59511,.- Hydraulic ,39.- Options Stainless Steel Wear Parts Extra Charges EUR Viton Lobes SS Wear Parts + Viton Lobes ,- Article No. Description Unit price EUR 995 Relief valve system, Safety valve with flanges Dry running protection 37.- All prices are retail prices exclusive VAT Subject to change without notice April 1
5 Pressure (Bar) 1 1 Performance Curve for AGM 19/ (water) Flow m(m³/h) 3 /hour 1 Rpm 15 Rpm Rpm 5 Rpm 3 Rpm 35 Rpm Rpm 5 Rpm 5 Rpm 55 Rpm Rpm Pressure (bar) Power Consumption Table (kw) for AGM 19/ Pump Operation RPM Extra Charges EUR Unit Price AGM 19 Item No. EUR Stainless Steel SS Wear Parts Viton Lobes* Extreme Duty Wear Parts + Viton Lobes* Bare shaft pump 19/ 3 3,73.- (AGM 19/1) 7.- 1,1.-,.- Bare shaft pump ED 19/1 33, kw unit 19/ 5193,1.- kw unit 19/ 519 7, kw unit 19/ , kw unit 19/ 51975, kw unit 19/ , kw unit 19/ , kw unit 19/ ,7.- Hydraulic 19/ 39-1,7.- Options * = available for AGM 19/ pumps only ,7.-,3.- Article No. Description Unit Price EUR 919 Relief valve system 3, Safety valve with flanges 1, Dry running protection 37.- All prices are retail prices exclusive VAT Subject to change without notice April 1
6 Pressure (Bar) 1 1 Performance Curve for AGM 3/ (water) Flow m(m³/h) 3 /hour 1 Rpm 15 Rpm Rpm 5 Rpm 3 Rpm 35 Rpm Rpm 5 Rpm 5 Rpm 55 Rpm Rpm Pressure (bar) 1 9 Power Consumption Table (kw) for AGM 3/ Pump Operation RPM Extra Charges EUR Unit Price AGM 3 Item No. EUR Stainless Steel SS Wear Parts Viton Lobes* Extreme Duty Wear Parts + Viton Lobes* Bare shaft pump 3/ 35,.- (AGM 3/) 7.- 3,.- 3,93.- Bare shaft pump ED 3/ 335 5, kw unit 3/ 53 7, kw unit 3/ 5355, kw unit 3/ , kw unit 3/ ,.- 15 kw unit 3/ , kw unit 3/ ,3.- kw unit 3/ 53 1,17.- Hydraulic 3/ 39 7,5.- Options * = available for AGM 3/ pumps only. 1, ,5.-,.- Article No. Description Unit Price EUR 93 Relief valve system 3, Safety valve with flanges 1, Dry running protection 37.- All prices are retail prices exclusive VAT Subject to change without notice April 1
7 Technical Data Flow and pressure: Model Displacement volume(l) Max. flow* (m 3 /hour) Max. pressure (bar) 95/1, / 1,9 5 19/1 ED 1, / 3, 3/ ED 3, 13 * = applies to water. The performance is highly dependent on the liquid s viscosity. Dimension sketch: O A B N H K C L M F E G Q I J P Model A B C E F G H I J K** L M N O P Q Weight 95/ DN 1 ø3 j kg 19/ 19/1 ED 3/ 3/ ED DN1 1 ø3 j kg DN15 1 ø3 j kg * = according to DS 3 / DIN 33 Norm. The dimensions are without tolerances and should be considered as guidance. All prices are retail prices exclusive VAT Subject to change without notice April 1
8 Your Experienced World Wide Pump Supplier Agrometer has been serving the marine industry with durable pump solutions since 199. Each pump unit is carefully assembled and thoroughly tested at our own facilities before shipment. Agrometer was founded in 197 and is located in Grindsted, Denmark, on a 7, sq.feet ground with production, warehouse and administration facilities. The location is just 1 min. drive from Billund International Airport, pumps and parts can be shipped to any destination world-wide within hours. All prices are retail prices exclusive VAT Subject to change without notice April 1
The. AGM pump. Agrometer a/s
The AGM pump Sludge Bilge Oily Bilge Subject to change without notice All reservations made September 2010 The Choice of Professionals Since the introduction to the marine industry more than 15 years ago,
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
Dewatering Submersible sewage pumps
Series description Wilo-Drain TP 80/TP 100 Equipment/function Thermal motor monitoring Leakage detection in the motor ATEX-certified Sheath current cooling Materials Pump housing: PUR Impeller: PUR Shaft:
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 FITTINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 25/08 204 PERFORMANCE CURVE 25/15 205 PERFORMANCE CURVE 25/25 206
Technical Manual. Positive displacement lobe pump. Serie C - CF. Translation of the original instructions
Technical Manual Positive displacement lobe pump Serie C - CF Translation of the original instructions all the power with a delicate touch T.M. C-CF Series rev.1 05/2012 All rights reserved O.M.A.C. S.R.L.
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
DUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 CURVE SPECIFICATIONS 203 1X 51-S 204 1X 51.5-S 205 2X 51.5-S 206 2X 52.2-S 207 2X 53-S 208 3X
DUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 CURVE SPECIFICATIONS 203 1X 51-S 204 1X 51.5-S 205 2X 51.5-S 206 2X 52.2-S 207 2X 53-S 208 3X
DUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 GAMMA 203 CURVE SPECIFICATIONS 204 1X 51-S 205 1X 51.5-S 206 2X 51.5-S 207 2X 52.2-S 208 2X 53-S 209 3X 53.7-S 210 3X
PV Series Vane Truck Pumps
PV Series Vane Truck Pumps ISO 900-008 PV Series Pumps General Introduction Versa vane truck pumps are specifically designed to comply with the pumping requirements demanded by the LPG industry. Bulk delivery
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
MMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
GENERAL INFORMATION THE BUSINESS STRATEGY IS CONCENTRATED ON: THE PRODUCT RANGE CONTAINS PUMPS FOR:
GENERAL INFORMATION SIVAG Pumpen Ges.m.b.H. is primarily concerned with manufacturing and distributing of pumps for many years. Basically the products are used for industrial purposes. Since 1989 the head
The pumping action of the B series lobe displacement pump is achieved thanks to the counter-rotation of
INDUSTRY APPLICATION Rotary lobe pumps type B are positive displacement pumps for liquids of any viscosity with lubricating and non-lubricating properties. Lobe pumps are used in the chemical, pharmaceutical
GS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
SPECIFICATION PUMP. DW - G 2 UNI ISO 228 Flange
SPECIFICATION PUMP Type of liquid Dirty water, sewage water Liquid Max temperature [ C] 40 Handled Max solids size [mm] 50 spherical Maximum immersion [m] 7 Single channel (DW) Impeller Vortex (DW VOX)
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
DRS. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE /A40-115-1.1M, /A40-140-1.1M, /A40-136-1.1M, /A40-150-1.8M 203 PERFORMANCE CURVE /A40-136-1.4,
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART DW 204 PERFORMANCE CHART DW VOX 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART DW 204 PERFORMANCE CHART DW VOX 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS
- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 300 203 PERFORMANCE CURVE 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
MULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
316 Stainless Steel Submersible Pumps 8" 10" 12"
316 Stainless Steel Submersible umps 8" 10" 12" Stainless Steel Submersible umps 40 to 540 m 3 /h The FS Series pumps have been engineered in all AISI 316 stainless steel for efficient and reliable pumping
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 BEARINGS 301 MECHANICAL SEAL 301
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DW 203 PERFORMANCE CURVE DW VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE BEST 2 203 PERFORMANCE CURVE BEST 3 203 PERFORMANCE CURVE BEST 4 203 PERFORMANCE CURVE BEST
Radial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES DW VOX 204
CONTENTS Page SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 20 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 203 PERFORMANCE CURVES VOX 204 CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 TYPE KEY 202 PERFORMANCE CHART DW 203 PERFORMANCE CHART DW VOX 204
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 TYPE KEY 202 PERFORMANCE CHART DW 203 PERFORMANCE CHART DW VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 SINGLE
HIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017
Position Qty. Description 1 CR 32-3-2 A-F-A-E-HQQE Phone: 8 61 Date: 1/3/217 Product No.: 961221 Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range:
Company name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017
Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE BEST 2 203 PERFORMANCE CURVE BEST 3 204 PERFORMANCE CURVE BEST 4 205
High Pressure Centrifugal Pumps Product Overview
High Pressure Centrifugal Pumps Product Overview High Pressure Centrifugal Pumps Product Overview Wilo-Economy MHI Duty chart H[m] 6 5 4 Wilo-Economy-MHI 5 Hz Non self-priming pumps for: Water supply and
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE RIGHT PERFORMANCE CURVE RIGHT
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 75 204 PERFORMANCE CURVE 100 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 BEARINGS 301 MECHANICAL
MMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART 40 203 PERFORMANCE CHART 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
DulcoFlex Peristaltic Pump DFC 50
INSTRUCTION MANUAL DulcoFlex Peristaltic Pump DFC 50 This manual forms an integral part of the pump and must accompany it until its demolition. The peristaltic pump is a machine destined to work in industrial
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
Submersible. Pumps Motors. 60Hz 8 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution 1 Product data Stainless steel submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
CVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V)
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 36 m 3 /h Optimal delivery head H opt 6.0 m Optimum
CHEMICAL PUMPS SINCE 1992 GENERAL CATALOGUE 2018/19
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2018/19 MAG-DRIVE ROTARY VANE S SEAL-LESS MAG DRIVE VANE S In seal-less magnetic drive vane pumps, the external magnet is directly connected to the motor shaft and
Radial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm
Series description: Wilo-Drain MTC
H/m Series description: Wilo-Drain MTC Wilo-Drain MTC 50 40 30 20 10 0 Design Submersible sewage pump with external macerator for intermittent and permanent operation, made of grey cast iron for stationary
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303 THERMAL INSULATION 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 300 203 PERFORMANCE CURVES 500 204 - CONSTRUCTIONS 300 SECTIONAL
M F OS 50- K1.2-2A- O10 F- B- PH ( ) Motor Fixed Displacement Options Reference Page 16 Reference Drawing Page
Orbital Motor, 8-985 cc/rev Series: MFO SAE 0-1900 N-m (1401 ft.-lbs.) 5-1950 rpm Features High torque at low speeds with smooth operation Orbital Rotor and Roller gear set providing low pressure start
Type KKP. Combination pumps
Features Compact and light Integrated low-pressure unloading valve and fail safe valve (not suitable for continuons rating) Can be started in maximum pressure mode Self-priming Direct installation of motor
Technical Data B20x. 8 BiRotor, APL. Model B201 [8 ] Model B203 [8 ] Model B204 [8 ] Model B205 [8 ]
![Technical Data B20x. 8 BiRotor, APL. Model B201 [8 ] Model B203 [8 ] Model B204 [8 ] Model B205 [8 ]](/thumbs/93/114283662.jpg "Technical Data B20x. 8 BiRotor, APL. Model B201 [8 ] Model B203 [8 ] Model B204 [8 ] Model B205 [8 ]")
Technical Data BiRotor, APL Model B201 [] Model B203 [] Model B204 [] Model B205 [] General The BiRotor Meter is a positive displacement meter utilized in the most demanding applications requiring accuracy,
MI250 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
MI250 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Hydraulic motors MI250 OCLAIN HYDRAULICS CHARACTERISTICS Theoretical torque Max.power Max.speed ressure max. at 100 bar at 1000 SI cm³/tr [cu.in/rev.]
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X
Variable Vane Pump, Direct Controlled PV7...A Series 1X / X RE 1 Issue: 1.13 Replaces: 8.8 Sizes 1 to Maximum pressure 1 bar Displacement volume 1 to cm 3 Features Very short control times Low noise Mounting
- SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART MULTIGO PERFORMANCE CHART MULTIGO
CONTENTS Page - CONTENTS CONTENTS 100 - SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS CONSTRUCTIONS 300 CONSTRUCTIONS 301 CONSTRUCTIONS
page 402 page 403 page 405
page 402 page 403 page 405 Quick closing valves Ductile cast iron Pressure rating: PN 10 DN 15-200 Pressure above the disc Actuators easy to exchange Type approval by classification societies Bellow sealed
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT Valve program for small and medium flows: VDHT 3/8 E 2/2 VDHT 1/2 E 2/2 VDHT 3/8 EA 2/2 VDHT 1/2 EA 2/2 Valve program
2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
VPPM /110 ED VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
16 100/110 ED VPPM VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE The VPPM pumps are variable displacement axial-piston pumps with variable swash plate, suitable for applications with open
Hygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
MOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
Submersible Pumps. 5'' CS Series Pumps
5'' CS Series Pumps 1 Submersible Pumps 5 5 CS CS Series Pumps Features Ordering Information Model Number Explanation 3 CS 4-1 Ordering Information Phase No. of Stages Series m 3 /hr @ BEP Model FE Order
External gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
Data sheet: Wilo-Drain TP 65 F 109/22 (3~400 V)
Data sheet: Wilo-Drain TP 65 F 109/22 (3~400 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - No. of poles: 2 Unit Max. delivery head H max 14.5 m Max. volume flow Q max 52.0 m 3 /h Optimal delivery head H
SUBMERSIBLE SEWAGE PUMPS WITH SEMI-VORTEX IMPELLER in cast iron
Submersible sewage pumps with semi-vortex impeller APPLICATIONS Ideal for waste waterapplications containing soft or fibrous solids Industrial waste water drainage Septic effluent Miscellaneous drainage
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE CURVE 150 206 - CONSTRUCTIONS
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 LPC4 32 205 LPC4 40 206 LPC4 50 211 LPC4 65 215 LPC4 80 219 LPC4 100 222 LPC4 125 225 LPC4 150 226 - CONSTRUCTIONS
Contents Project: Model: Chk d: Date:
Contents Model DSHU6. DSHU6.7 DSHU6. DSU6. DSHU6. DSU6.7 DSHU6.7 8DSU6. 8DSHU6. 8DSU6.7 8DSHU6.7 DSU6. DSU67. Section Page Specifications -7, 8 Selection Chart -7., 8. Performance Curves -6 Outline Drawings
Company name: Created by: Phone:
Qty. Description 1 CRE 1-5 A-FJ-A-E-HQQE Date: /3/17 Product No.: On request Note! Product picture may differ from actual product The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor
APP S pumps APP S / APP S / APP S 21-38
MAKING MODERN LIVING POSSIBLE Instruction APP S 2.0-3.5 / APP S 5.1-9.0 / APP S 21-38 ro-solutions.com Instruction Table of Contents 1. Identification...2 2. System design...3 2.1 Open system design...3
LPCD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 204 PERFORMANCE CURVE 50 205 PERFORMANCE CURVE 65 207 PERFORMANCE CURVE 80 208 PERFORMANCE
MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
d z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
Tender Text. Company name: Created by: Phone: Date: 3/13/2017. Product No.: CRE 5-20 AN-FGJ-A-E-HQQE
Tender Text Product No.: 9685315 CRE 5-2 AN-FGJ-A-E-HQQE Product photo could vary from the actual product Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation:
ACCESSORIES AND DIAPHRAGM SEAL
ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges GN16-10 C +80 C in NBR, 110 C in EPDM, 180 C in FKM Max Pressure : 16 Bars up to DN200 ( 10 bars over ) Specifications : Wafer
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE
WEIGHT. Reduction ratio 2:1 3:1 4:1 5:1 6:1 7:1. Max Input Speed
OFFSET SPUR GEAR REDUCERS HPCFF10 ø15 HPCFF10 HPCFF10-2 2:1 93 2000 1000 1.55 125.88 HPCFF10-3 3:1 93 2000 666 1.49 125.88 HPCFF10-4 4:1 93 2000 500 1.33 125.88 HPCFF10-5 5:1 93 2000 400 1.27 125.88 HPCFF10-6
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.
(%$5$ PUMPS EUROPE S.p.A. &(175,)8*$/38036':2. &217(176 50Hz
&(175,)8*$/38036':2 &217(176 50Hz Page 63(&,),&$7,216 200 SELECTION CHART 201 PERFORMANCE CHART 150 202 PERFORMANCE CHART 200 203 PERFORMANCE CHART 300 204 PERFORMANCE CHART 400 205 &216758&7,216 300 SECTIONAL
International standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
![International standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)](/thumbs/96/129251394.jpg "International standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)")
Gear Pump High Performance Version GP3 up to cm 3 (6. inch 3 ) p max 32 bar (46 PSI) Speed from 35 to 32 RPM Technical Features Operating pressure 29 bar, Peak pressure 32 bar High-strength quality aluminum
5" SUBMERSIBLE PUMPS. by Franklin Electric
5" SUBMERSIBLE PUMPS INDEX NAUTI VN 5" Submersible Pumps... 2 General Product Curves... 3 Material Table... 3 Technical Data and Performance Curves VN 3..................................................................................................
Petrone Oleodinamica s.r.l.
Petrone Oleodinamica s.r.l. The Company was set up by Vito Petrone in Gravina in Puglia in 1953 as a workshop to repair farming and industrial vehicles. In 1968, the Company began to develop an interest
SCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
GEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
MOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
SUBMERSIBLE ELECTRIC PUMPS FOR FOUL WASTE WATER (VORTEX) in cast iron
) Submersible electric pumps for foul waste water, cast iron. APPLICATIONS Evacuation of civil and industrial waste water Effluent treatment Draining underground areas Handling fluids containing suspended
Technical data 50 & 60 Hz. Vertical centrifugal pumps Series: DPLHS
Technical data 50 & 60 Hz Vertical centrifugal pumps Series: DPLHS 2 Table of Contents 1 Pump introduction 1.1 General... 4 1.2 Model key... 4 1.3 Description of the product... 4 1.4 Operation... 5 1.5