90 Screwdriver. Right-angled drilling and screw insertion.

Transcription

1 90 Screwdriver. Right-angled drilling and screw insertion. Low-profile head Reliable transmission of force Broad range of applications

2 90 Screwdriver Indications The Synthes 90 Screwdriver is indicated for the manual and powered predrilling and insertion of bone fixation screws in oral and maxillofacial surgery. Turning Handle Low-profile head Minimal overall height Optimized drive design Easy to clean Facilitates intraoral treatment of subcondylar fractures. Reliable transmission of force Drive shaft designed to trans mit the torque required for screw insertion Optimized bearings minimize mechanical wear and prolong instrument life Broad range of applications Minimally invasive predrilling and insertion of screws in the mandible, without a trans buccal approach. Examples: Plate fixation of bilateral sagittal split osteotomies (BSSO) Endoscopically supported plate fixation of subcondylar fractures Minimal overall height Synthes CMF 90 Screwdriver

3 Mini module Easy to pick up and remove screwdriver shafts and drill bits. Screwholder Screwholder Insert Screwholder The Screwholder can be turned at an angle behind the head. Easier visibility Simple handling Minimally invasive Predrilling Suitable for right-angled predrilling. Can be attached to a power source by removing the Turning Handle: maximum input speed 15,000 rpm Adaptor for Intra-Coupling ( ) allows the 90 Screwdriver to connect to the Synthes Electric Pen Drive for drilling under power Easy exchange of drill bits and screwdriver blades Adaptor for Intra-Coupling, for attachment to the Synthes Electric Pen Drive. ISO 3964/ EN standard. Warning: The maximum input speed should not exceed 15,000 rpm. The gear ratio of the 90 Screwdriver is 2:1. Synthes CMF

4 90 Screwdriver Set ( ) Instrument Tray and Modules Instrument Tray Mini Module 1.5 mm for Instrument Tray, Mini Module 2.0 mm for Instrument Tray, Mini Module 2.4 mm for Instrument Tray, Lid for Instrument Tray, Instruments Shaft, 2 ea Handle, 2 ea Turning Handle, 2 ea Drivershaft, 2 ea Gear Cover, 4 ea Gear, 4 ea Screwholder, without Insert, 2 ea. Screwholder Inserts for Screws, mm and 2.0 mm mm 1.0 mm Drill Bits, mm length, 4 mm stop mm length, 8 mm stop mm length, 12 mm stop 1.1 mm Drill Bits, mm length, 4 mm stop mm length, 8 mm stop mm length, 12 mm stop 1.5 mm Drill Bits, mm length, 6 mm stop mm length, 8 mm stop mm length, 12 mm stop mm length, 14 mm stop mm length, 16 mm stop mm length, 18 mm stop Cruciform Screwdriver Shafts, self-retaining,, 2 ea mm/2.0 mm mm StarDrive Screwdriver Shafts, self-retaining,, 2 ea mm mm mm PlusDrive Screwdriver Shafts, self-retaining,, 2 ea mm mm/2.0 mm Spray Adaptor Instrument for Removal of Inserts, 1.8 mm Drill Bits, mm length, 6 mm stop mm length, 8 mm stop mm length, 12 mm stop Note: For additional information, please refer to package insert. Synthes CMF 90 Screwdriver

5 Matrix Instrument Tray and Modules Instrument Tray for Mini Module Lid for MatrixMANDIBLE Mini Module Tray MatrixMIDFACE Mini Module Tray MatrixMANDIBLE Screwdriver Blade, self-retaining, MatrixMIDFACE Screwdriver Blade, self-retaining, Also Available Maintenance Spray, for Electric Pen Drive Adaptor for Intra-Coupling for Pen Drive MatrixMIDFACE Drill Bits 1.1 mm Drill Bits, mm length, 4 mm stop mm length, 6 mm stop mm length, 8 mm stop 1.25 mm Drill Bits, mm length, 10 mm stop mm length, 12 mm stop MatrixMANDIBLE Drill Bits 1.5 mm Drill Bits, mm length, 6 mm stop mm length, 8 mm stop mm length, 12 mm stop 1.8 mm Drill Bits, mm length, 6 mm stop mm length, 8 mm stop mm length, 12 mm stop mm length, 14 mm stop mm length, 16 mm stop mm length, 18 mm stop 2.4 mm Drill Bits, mm length, 6 mm stop mm length, 8 mm stop mm length, 12 mm stop Synthes CMF

6

7

8 Synthes CMF 1302 Wrights Lane East West Chester, PA Telephone: (610) To order: (800) Fax: (610) Synthes (Canada) Ltd Meadowpine Boulevard Mississauga, Ontario L5N 6P9 Telephone: (905) To order: (800) Fax: (905) Synthes, Inc. or its affiliates. All rights reserved. PlusDrive and Synthes are trademarks of Synthes, Inc. or its affiliates. Printed in U.S.A. 6/09 J7172-B