SYNTHES and DYONICS. Synthes Blades for Large-Bone Power Systems. Synthes Twist Drills + Taps C-4. Dyonics Blades for Large-Bone Power Systems C-2 C-6

Transcription

1 C Synthes Blades for Large-Bone Power Systems C-2 Synthes Twist Drills + Taps C-4 Dyonics Blades for Large-Bone Power Systems C-6 SYNTHES and DYONICS Blades, Twist Drills, Taps and Burs

2 BLADES for Large-Bone Power Systems Oscillating Saw Blades Part No. Width Cut Material AO TPI Synthes Compact Air Drive, Power Drive, Air Power Line, and Battery Power Line To cross-reference to Synthes by part number, replace AO with 519 BLADES: LARGE-BONE AO Oscillating AO AO AO To search by manufacturer part number or dimensions, visit Synthes C-2

3 Part No. Width Cut Material TPI AO AO Synthes Compact Air Drive, Power Drive, Air Power Line, and Battery Power Line To cross-reference to Sunthes by part number, replace AO with 519 BLADES: LARGE-BONE Oscillating To search by manufacturer part number or dimensions, visit Synthes C-3

4 TWIST DRILLS MicroAire Type Synthes -Style Drill Diameter Overall Models 1990, 5990, 6690 and MicroAire Part # Replaces Synthes # Sold individually. To order non-sterile, add NS to the end of the product number (e.g XXXNS). TWIST DRILLS * * Quick-Connect Style Fits Synthes-Style Drill Couplers Jacobs Style Fits Jacobs Drive Couplers and Adapters *Titanium nitride-coated To search by manufacturer part number or dimensions, visit Synthes C-4

5 TAPS TAPS MicroAire Synthes -Style Drill Models 1990, 5990, 6690 and Sold individually. To order non-sterile, add NS to the end of the product number (e.g XXXNS). Diameter Overall MicroAire Part # Replaces Synthes # Use With For Use with Screw Type mm drill bit 1.5 mm cortex screw mm drill bit 2.0 mm cortex screw mm drill bit 2.7 mm cortex screw * mm drill bit 3.5 mm cortex & titanium shaft screws * mm drill bit 3.5 mm cortex & titanium shaft screws mm drill bit 4.0 mm cancellous screws mm drill bit 4.5 mm cortex & titanium shaft screws mm drill bit 4.5 mm cortex & titanium shaft screws *Titanium nitride-coated To search by manufacturer part number or dimensions, visit Synthes C-5

6 BLADES for Large-Bone Power Systems Oscillating Saw Blades Part No. Width Cut Material DO DO TPI DO Dyonics Sagittal Saw 2855 To cross-reference to Dyonics by part number, replace DO- with 3 BLADES: LARGE-BONE Oscillating DO To search by manufacturer part number or dimensions, visit Dyonics C-6

7 SYNTHES-STYLE BLADES Synthes MicroAire Page AO-107 C AO-108 C AO-114 C AO-115 C AO-116 C AO-117 C-3 CROSS-REFERENCES AO-118 C-3 SYNTHES-STYLE PINS + WIRES Synthes MicroAire Page Synthes MicroAire Page C C C C C C C C C C C C C C C C C C C C C C C C C C C C-5 To search by manufacturer part number or dimensions, visit Synthes C-7

8 All dimensions shown are nominal values subject to standard variances and tolerances. MicroAire is a registered trademark of MicroAire Surgical Instruments LLC. The following companies are not affiliated with MicroAire Surgical Instruments LLC: Conmed Corporation Dyonics, Inc Harris/Aesculap Jacobs Linvatec Corporation Stryker Synthes (USA) Terumo Zimmer, Inc Dyonics is a trademark of Smith&Nephew Jacobs is a registered trademark of Jacobs Linvatec, Hall, Cebotome, Osteon, and Neurairtome Mini-Driver, Maxi-Driver and Maxion are trademarks of Linvatec Corporation, a subsidiary of ConMed Corporation. Stryker is a registered trademark of Stryker Corporation Synthes is a registered trademark of DePuy Synthes Terumo is a registered trademark of Terumo Medical Corporation Zimmer is a registered trademark of Zimmer, Inc MicroAire Surgical Instruments 3590 Grand Forks Boulevard Charlottesville, VA USA or MicroAire Surgical Instruments, LLC All rights reserved. LIT-DISPOSABLES-CAT REV A