PARTS SECTION. Section MF4

Transcription

1 PARTS SECTION Section MF4 Wheels, Steering, Axle; hubs, rims, steering pumps,

2 ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE , 185, 190, 190XT , 185, 190, 190XT Radiator Hose Upper Radiator Hose Lower PTO DRIVEN AIR PUMP AC-1 Any 540 rpm PTO SIDE PANEL LH REJECTS/SECONDS A M2 SECONDS NO REFUNDS. 135, 2135 SIDE PANEL RH REJECTS/SECONDS A M2 SECONDS NO REFUNDS 135, 2135 Side panel, LH. Metal Side Panel, RH. Metal MISC

3 HUB, Heavy Duty for 2WD Tractors M93 253, 263, 270, 271, 281, 283, 290, 360, 362, 365, 375, 383, 390, 390T, 394 S, 396, 398, 399, 670, 690, FRONT WHEEL HUB M92 255, 265, 1085 HUB, FRONT HUB CAP M91 MF135, 150, 165, 175, 180, 230, 235, & 245 except Vine and Orchard, 255 to S/N 9A324145, 265 to S/N 9A324138, 275 to S/N 9A324136, Early 1080, Early 1085, Ind. 20, 2135 Late Except Narrow Model. Front wheel hub. 6 bolt. HUB, FRONT M1 MF 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 275, 1080, 1085, 1100, 1105/1135, 1130, Ind. 20, 20C, 30, 2135, 3165, 2500 Forklift. Threaded, screw-on hub cap. Fits M91 Hub. HUB M92 TO-30, TO-20, TE-20, TEA-20, TO- 35, MF35, MF50, MH50, MF65, FE35, 135 UK, M1 240, 240 P., 240 S, 231, 251 XE, 360, 253, 263, 135 U.K, 165 U.K, 20E. MF 4-1

4 LUG BOLT BOLT, front wheel hub # M1 HUB M M1 Most MF Tractors 9/16 x 29/32 NF, Hex LUG BOLT LUG NUT M1 USE LUG NUT M1 HUB M M1 BOLT M1 BOLT M1 LUG BOLT M1 USE LUG NUT M1 HUB M92 WEAR SLEEVE FOR M91 WHEEL HUB M M91 WHEEL HUB MF 4-2. WEAR SLEEVE

5 REAR WHEEL BOLT REAR WHEEL NUT M1. 35, 50, 135, 150, 230, 235, 240, 245, 240P., 250, TO30, TO35, TO20, TE20, TEA M1. 35, 50, 135, 150, 230, 235, 240, 245, 240P., 250, TO30, TO35, TO20, TE20, TEA20 OVERALL LENGTH: 2-1/ X 16 FRONT WHEEL RIM 5.50 X 16 FRONT WHEEL RIM M X16 RIM M X16 RIM DESCRIPTION: 4.50 X16 6 BOLT RIM DESCRIPTION: 5.50 X16 6 BOLT RIM MF 4-3

6 SCREW, for stop on power adjust wheels M1 Many MF, Allis, White and AGCOSTAR tractor models. REAR WHEEL STOP M M1 Massey Ferguson 184-4, 3050, 3060,3070, 3090, 3065, 283 (Brazil), 670, 690, 270, 290, 298, 699, 375, 390, 398, 399, 390T, 362, 399, 396, 365, 4225, 4235, 4240, 4245, 4255, 4265, 4260, 4270, 4243, 4253, 4263, 4325, 4335, 4345, 4355, 4360, /2 overall length REAR WHEEL CLAMP REAR WHEEL BOLT M2 Power Adjust Rear wheels M M M1 TO30, TO20, TE20 35, 135, 230, 245, 240 Old MF# M2 HAND THROTTLE CABLE 5/8 x 2-7/8, NF FOOT THROTTLE CABLE M92 231S/241, 240, 253, M91 231S/241, 240, 253, 263 HAND THROTTLE CABLE FOR TRACTORS WITH ERGONOMIC PEDALS FOOT THROTTLE CABLE FOR TRACTORS WITH ERGONOMIC PEDALS MF 4-4

7 REAR WHEEL RIM 9X28 REAR WHEEL RIM 11X M91 TO20, TO30, M M91 135, 150, 230, 245, 285, 20. HUB CAP HUB CAP M1 HUB M M1 HUBS M92, M1 OIL-DUST SEAL OIL-DUST SEAL M1 USE WITH HUB M92 PART NO# M1 USE WITH HUB M1 MF 4-5

8 WASHER, for Hub Part # M1 1-1/2 O.D. 3/4 I.D. WASHER, for Hub Part # M1 2-1/4 O.D. 1-1/4 I.D. Retaining Nut, Hub Spindle Nut Part # M1 CASTLE NUT Retaining Nut, Hub Spindle Nut Part # X1 New# /4 slotted hex STEERING PIN M1 Old# M1 282, 261, 283 (Brazil) Also Replaces# M1 ROD END M91. Early 230, 245 MF 4-6

9 STEERING GEAR LH STEERING GEAR RH M1 TO-35, MF 35, MF135, 2135, 35 turf & utility, 35 government M1 TO-35, MF 35, MF135, 2135, 35 turf & utility, 35 government Also called Pitman gear. Also called Pitman gear. CONNECTOR, STEERING CYLINDER M P, 231 CONNECTOR, STEERING CYLINDER M P, 231 Long connector Short connector STEERING ROD, For MF 245 CYLINDER ROD, RH/LH M91 MF 230, /8 long M91. MF /8 long from ctr of end to end of threads MF 4-7

10 STEERING CYLINDER LH STEERING CYLINDER RH M M92 240, 250, 20D, 135 U.K M M92 240, 250, 20D, 135 U.K. STEERING CYLINDER STEERING CYLINDER M91 240, 231S/241, 253, 263, 360, 362, 4225/ 4235 / M M93 20D, 20E, 231, 240P, 240(9A20286 & UP), 240(PRIOR TO S.N. N01001), 240(S.N. N01001-A20286), 250 O Ring Kit, for STEERING Cyl. SEAL REPAIR KIT for STEERING CYLINDER M1 SCK-1 231, 231S/241, 240, 250, 253, 263, 362, 360, 20E, 30H, 40E M91 SCK-2 230, 245, 255, 265, 275, 285, (with tie-rod welded to the shaft.) DESCRIPTION: Includes the following parts; M1, M1, M1, X1, X1, X1, M1 MF 4-8

11 STEERING ORBITROL CONTROL UNIT 100CC M91 240, 253, 263, 261, 271, 281, 360, 362, 365, 375, 383, 390, 394S, 396, 398, 399, 4225, 4235, 4240, 4245, 4255, 4265, 4243, 4253, 4263, STEERING ORBITROL CONTROL UNIT 125 CC M91 375, 383, 390, 398, 399. Orbitrol Control Unit 100cc/rev. Also fits ALLIS 8745, Fits WHITE 6410, 6510 Orbitrol Control unit 125cc/rev. POWER STEERING PUMP w/gear M92 Also replaces M91 35, 135, 150, 230, 235, 245, 2135, 20, 20C, 30B, 40, 205, 205-4, 2500 Forklift, STEERING PUMP M95 165, 175, 255, 261, 265, 275, 282, 285, 290, 50C, 50D, 30, 31, 6500 FORKLIFT Replaces J.S. Barnes # GC-5060-A-GA-2. SEAL REPAIR KIT for STEERING CYLINDER 245KIT-1 SCK-3 MF 245 steering cylinder (with tie-rod screwed to the shaft.) DESCRIPTION: Includes the following parts; M1, M91, X1, (2) X1, X1 MF 4-9

12 BRAKE SHOE KIT M92 MF 240, 231, 20D, 135(UK) Brake Shoe Kit = 2 BRAKE SPRING Fits: TO20, TO-30, TE-20, TEA-20, 240, 231, 240P. For all drum brake tractors. BRAKE SEAL M1 240, 245, 250, 255, 261, 265, 270, 271/281, 275, 282, 283, 283 (Brazil), 285, 290, 298, 670, 690, 698, 699, 1085, 253 & 263, 254-4, 274-4, 154-4S, 174-4S, 194-4S, 251XE, 271X, 271XE, 281X, 281XE, 265S & 285S (Turkey), 364S, 374S, 384S, 394S, 374V, 20E, 30B, 30E, 40B, 50C, 50D, 50E, 50F BRAKE SPRING M1 240, 231, 240P. For all drum brakes. Overall spring length is 3-7/8 Overall spring length 5 3/8 BRAKE ADJUSTER ASSEMBLY M91. For all drum brake tractors. Also fits 231, 240S, 240 MF 4-10

13 SPINDLE LH M94 240S SPINDLE RH M94 240S Spindle. Left side. Right side SPINDLE, LH SPINDLE, RH M95 270, 290, 282, M95 270, 290, 282, 283 SPINDLE LH SPINDLE RH M94 MF 240, MF M94 MF 240, MF 250 MF 4-11

14 DUST SEAL, for FRONT SPINDLE DUST SEAL, for FRONT SPINDLE M2 TO20, TO30, TE20, TEA20, TO35, MF35, MH & MF 50, MF65, 135, 150, 235, 230 & 245 prior to s/n 9A349239, MF 240 s/n N01001-A20286, MF240 s/n A20286 & up M2 35, 50, 65, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 231, 261, 240, 240-P., 253 & 263, 271/281, 362, 670, 690, 265S & 285S, 3050, 3060, 3070, 3090, 3630, 3650, 3065, 3125, 3095, 3645, 3655, 3120, 3660, 3075, 6140, 6150, 2135, 3165, 1080, 1085, 4225, 4235, 4240, AND MANY INDUSTRIAL MF TRACTORS. SPINDLE REPAIR KIT BUSHING, for spindle CTM-611 TO-20, TO30, TO35, TE- 20, TEA-20, MF35, 135 DescriptionContains : (2)180345M1, (1) 18560X, (1) M1 135, 165, 175, 230, 235, 245, 255, 265, 275, 285, 670, 690, 240, 240P., 250, 270, 290, 282, 283, 231, 471, 481, 491, 492, /2 long, 1-11/16 O.D., 1-1/2 i.d. BEARING, Spindle M1 Fits Most MF tractors; WASHER/SHIM for FRONT AXLE M1 MF 4-12

15 FRONT AXLE SUPPORT FRONT AXLE SUPPORT M91. MF240, M M98 MF230, 245 Center pin hole is 1-5/8 diameter Center pin hole is 1-7/8 diameter FRONT AXLE ARM LH FRONT AXLE ARM RH M M92 MF235, 240-S, 240 S/N N A M M92 MF235, 240-S, 240 S/N N01001-A20286 FRONT AXLE BEAM FRONT AXLE BEAM M TO30, TO20, TE20, TEA20, TO35, MF35, 135, , 231, 235, 240, 240P., 250, 360, 375, 398, 399, 20D, 20E, & OTHERS MF 4-13

16 CENTER PIN, for FRONT AXLE CENTER PIN, for FRONT AXLE M M1. MF 240(9A20286 & UP), MF 240(PRIOR TO S.N. N01001), MF 240 (S.N. N01001-A20286), MF 240S(TURKEY), (UP TO SERIAL/ENGINE NO. P33139) 1-5/8 X 9-3/32 Long FRONT AXLE BUSHING M1 230, 245, 20C, 20D 1-7/8 X 9 Long FRONT AXLE BUSHING M1. 240, 250, 253, 263, 360, 362, 398, 399, M2 230, 231, 235, 240, 240 P., 245, 250, 253, 263, 630, 362, 20C, 20D, 30E, 40E 1-5/8 Split Bushing for front axle support. FRONT AXLE PIVOT PIN BUSHING M1 TO35, FE35, MF 35, 135, 230, 235, 2135, Ind. 20 CENTER PIN, for FRONT AXLE M M1. TO20, TE20, TEA20, TO30, TO35, 35, 135 MF2135, MF 4-14

17 STEERING ARM for M2 MF35, MF135, MF203,MF235 STEERING ARM for TO-30, MF M1 TO-30, TO-20, TE20, TEA-20, TO35, MF35, MF135(UK), MF240S(Turkey), MF 240 STEERING ARM Fits LH & RH STEERING ARM STEERING ARM M92 MF M91 MF 245, 255, 265, 275, 285 (Used tractor S/N 9A & Up) Steering arm with tapered hole. SPINDLE ARM, LH Steering arm without tapered hole. CENTER PIN, for FRONT AXLE M4. MF 230, 245, 20C M , 250, 253, 263, 360, 362, 398, 399 Left Side spindle arm 1-7/8 X 9-1/8 Long MF 4-15

18 STEERING WHEEL, CHROME SPOKES M1 MF35, MF65,MF135, 200 SERIES STEERING WHEEL M1 MF35, MF65,MF135, 200 SERIES STEERING WHEEL NUT M1. MF Pony, Super 90, TO30, TO35, TO20, TE20, TEA20, MF35, MF50, MH50, 65, 135, 270, 290, STEERING ASSEMBLY COVER M1 240, 250, 231, 240-P., 240-S 2-7/16 DIA., 7/8 CENTER HOLE TAILWHEEL HUB (Old Style Hub uses bearing cups & cones.) PART#: BH1311 FITS; 4:00X8 Tail Wheel Description: 4 BOLT, 5 BOLT CIRCLE MF 4-16