Premium Efficiency Motor Rebate Program (Retrofit Applications) Efficiency Requirements Page

Transcription

1 2017 Premium Efficiency Program (Retrofit Applications) Efficiency Requirements Page Premium Efficiency Motor Standards Open DripProof (ODP) Totally Enclosed FanCooled (TEFC) RPM RPM RPM RPM RPM RPM Rebate qualifications do not imply any representation or warranty of such equipment, design or installation by the cooperative. The cooperative shall not be responsible or liable for any personal injury or property damage caused by this equipment. The cooperative does not guarantee that a specific level of energy or cost savings will result from the implementation of energy conservation measures or the use of products funded under this program. In no event shall the cooperative be liable for any incidental or consequential damages.

2 2017 Commercial Rebate Program Motors & Variable Frequency Drives Rebate Application (Member Information Input Page) WrightHennepin Coop Electric Assn., P.O. Box 330, Rockford, MN Ph: Business Member Information Business name Billing address Phone Installation address (if different from above) Account number Contact name City State ZIP Phone Vendor Information Vendor name Vendor address City, State, ZIP Vendor contact name Phone The undersigned does hereby certify that 1) The undersigned, and not the cooperative, is solely responsible for the accuracy of the information contained in this application, 2) all rules of the Motor & Variable Frequency Drive (VFD) Rebate program have been followed, and 3) the installation is complete. Further, the undersigned acknowledges that nothing contained in the application shall impose any liability on the cooperative for the work performed and information presented by the member s engineer, contractor or vendor. WrightHennepin Cooperative Electric Association will be referred to hereafter in this application as "the cooperative" or as "W H". Member signature Date How to Apply for WH's Commercial Motor & VFD Program: 1. Complete the applicable rebate forms, including all pertinent information. (please note all warranty information, rules, and qualifications on the rules and information tabs per relevant forms) 2. Forward the applicable completed application forms, including copies of relevant project invoices (if available at time of submittal) to a WH commercial key account representative for review. 3. The cooperative's subsequent approval is required, to ensure payment of applicable rebate incentive. 4. Member must apply for applicable rebate incentive, no later than November 1st, 2017.

3 Fractional Motor Specific Rules and Qualifications The cooperative offers rebates to qualifying members who purchase and install qualifying new motors (not rewound or repaired motors) in new or retrofit applications. 1. Rebates for retrofit applications are only available in the case where a existing fractional AC motors of comparable size is in place. Replacement of existing ECM or brushless DC motors do not qualify. 2. Rebates apply to motors from 1/64 hp to 3/4 hp. 3. The nameplate of the new motor must clearly state the efficiency in order to qualify for rebates. 4. Motors greater than 3/4 hp must be evaluated through the Custom Energy Rebate program by the cooperative. 5. Motors controlled to vary speed depending on load conditions may qualify for the a variable speed rebate of 30/cumulative under the VFD prescriptive rebate. VFD Specific Rules and Qualifications 1. The cooperative offers rebates to qualifying members who purchase and install variable frequency drives (VFDs). 2. Rebates will apply only for new VFDs. Replacement VFDs do NOT qualify for rebate. 3. Rebates apply to VFDs in systems that: Are tied to an automated control system Have a VFD True Power Factor of.90 or greater 4. Approved applications of VFDs: HVAC fans, pumps, cooling towers, process equipment and industrial fans 5. Nonapproved applications of VFDs: Chillers, refrigeration compressors, and irrigators. These applications may be submitted for evaluation through the Custom Energy Grant Rebate program. The VFD will be evaluated in conjunction with the equipment operating efficiency and loading. Additional applications not approved for VFD rebates include softstart, powerfactor correction or related equipment Motors & Variable Frequency Drives Rebate Program Rules and Qualifications VFD Specific Rules and Qualifications (continued) 6. Rebate is based on the rated VFD controlled horsepower or horsepower of motor, whichever is lower. 7. Rebates are available for VFDs from 1 hp up to 200 hp. VFDs greater than 200 hp must be evaluated with the Custom Energy Grant Rebate program. 8. ECM or DC motors with controls for speed regulation also qualify for the VFD rebate on a cumulative basis as long as all other requirements are met. Premium Motor Specific Rules and Qualifications The cooperative offers rebates to qualifying members who purchase and install qualifying new motors (not rewound or repaired motors) in retrofit applications. 1. Rebates will apply only for new premium efficiency motors (not rewound or repaired motors) for retrofit installations only. Rebates for retrofit applications are only available where a non NEMA (National Electrical s Association) premium efficient motor existed and a new NEMA premium motor will take its place. 2. Rebates apply to motors from 1 hp to 200 hp when they meet or exceed premium efficiency standards and offer the following features: AC Polyphase induction motor Squirrel cage rotor design NEMA design B torque characteristics Synchronous speeds of 3600, 1800, 1200 rpm 3. The nameplate of the new motor must clearly state the NEMA nominal premium efficiency in order to qualify for rebates. 4. Motors greater than 200 hp must be evaluated through the Custom Energy Rebate program by the cooperative. Rebate qualifications do not imply any representation or warranty of such equipment, design or installation by the cooperative. The cooperative shall not be responsible or liable for any personal injury or property damage caused by this equipment. The cooperative does not guarantee that a specific level of energy or cost savings will result from the implementation of energy conservation measures or the use of products funded under this program. In no event shall the cooperative be liable for any incidental or consequential damages. Other Important Program Rules 1. Installation must be complete before rebate funds will be issued. 2. Members and vendors must submit itemized equipment invoices, along with rebate application and worksheet, to the cooperative. To ensure that the equipment installed meets the cooperative's performance standards, these invoices must itemize labor charges, quantity and price of the equipment installed, as well as information regarding the manufacturer and model numbers for all motors included in the rebate. 3. The cooperative reserves the right to conduct random inspections of installations. 4. Project must comply with all program specific rules and qualifications (see complete list of rebate specific rules). 5. The maximum rebate amount shall be the lesser of 50 percent of the project cost or as determined by the cooperative. 6. The member is responsible for checking with the cooperative to determine whether funding is available and to verify the program parameters. 7. Members must apply for rebates no later than November 1st, 2017.

4 2017 Premium Efficiency Program (Retrofit Applications) Data Input Page Business Name Retrofit Motor End Use Motor ODP/TEFC RPM Eff. % (ea) 15/ ODP Open Drip Proof TEFC Totally Enclosed Fan Cooled Total Rebate ** Required information. Rebate qualifications do not imply any representation or warranty of such equipment, design or installation by the cooperative. The cooperative shall not be responsible or liable for any personal injury or property damage caused by this equipment. The cooperative does not guarantee that a specific level of energy or cost savings will result from the implementation of energy conservation measures or the use of products funded under this program. In no event shall the cooperative be liable for any incidental or consequential damages.

5 2017 Variable Frequency Drive Rebate Program Data Input Page Business Name Project Equipment and Rebate Information Pump Application VFD Motor Model Number Eff%. (ea) 30/ VFD Rebate Fan Application VFD Motor Model Number Eff%. (ea) 30/ VFD Rebate Other Application VFD Motor Model Number Eff%. (ea) 30/ VFD Rebate **Total Equipment Costs Total Rebate **Required Information. Must enter total project to determine rebate.

6 2017 Fractional Program Data Input Page Business Name Watts (1/64 1/16 ) Motors ECM / DC motors End Use DC / ECM RPM Eff. % Watts 5/Motor DC Brushless DC motor ECM Electrically commutated motor Rebate 1/15 1/6 ECM / DC motors DC / End Use RPM Eff. % (ea) ECM 10/motor DC Brushless DC motor ECM Electrically commutated motor Rebate /5 3/4 ECM / DC motors End Use DC / ECM RPM Eff. % (ea) 15/motor DC Brushless DC motor ECM Electrically commutated motor Rebate Total Rebate Rebate qualifications do not imply any representation or warranty of such equipment, design or installation by the cooperative. The cooperative shall not be responsible or liable for any personal injury or property damage caused by this equipment. The cooperative does not guarantee that a specific level of energy or cost savings will result from the implementation of energy conservation measures or the use of products funded under this program. In no event shall the cooperative be liable for any incidental or consequential damages.