Table of Contents. Lucas Nülle GmbH Page 1/7
|
|
- Jessie Logan
- 6 years ago
- Views:
Transcription
1 Table of Contents Table of Contents Power Electronics / Electrical Machines / Drive Technology EEM Electrical machines 1kW EEM 5-1 Synchronous machines and mains synchronisation; reluctance machines 1kW EEM Synchronous machines 1kW Lucas Nülle GmbH Page 1/7
2 Power Electronics / Electrical Machines / Drive Technology Equipment and systems for vocational qualifications and engineering education on the following topics: Electrical machines, power electronics, drive technology Complete machine labs, electrical machine labs and drive technology EEM Electrical machines 1kW EEM Electrical machines 1kW Electrical machines convert electrical energy into mechanical energy or vice versa. A fundamental distinction can be drawn between DC, AC and three-phase machines. The machines used for training in electrical engineering are designed so that nearly all of the circuitry and drives found in industry, commerce and at home can be conveyed in a didactic fashion in hands-on training. Using the servo drive and braking system it is possible to easily determine all of the relevant data for electrical machines. Lucas Nülle GmbH Page 2/7
3 EEM 5-1 Synchronous machines and mains synchronisation; reluctance machines 1kW EEM 5-1 Synchronous machines and mains synchronisation; reluctance machines 1kW Synchronous machines are primarily used as generators in power generation and as highly dynamic drives (servos). Lucas Nülle GmbH Page 3/7
4 EEM Synchronous machines 1kW EEM Synchronous machines 1kW Training objectives: Motor operation: Motor connection Starting Reversing rotation direction Excitation and load angle Synchronous compensator operation Power factor and exciter current Load characteristics in motor operation V characteristics Stability limits Under- and over excitation Measurement evaluation Generator operation: Generator connection Voltage setting via the exciter current Load characteristics in generator operation Measurement evaluation Basic equipment set, consisting of: Basic equipment set, consisting of: 1 Three-phase multi-function machine, 1.0kW SE2662-6W 1 Lucas Nülle GmbH Page 4/7
5 2 Load resistance for synchronous generators, 1kW SE2662-6K 1 3 Cut-out switch, 4 pole CO3212-1W 1 4 Digital/analog multimeter, wattmeter, power-factor incl. software CO5127-1Z 1 Power supply: 5 Exciter for 0-200V regulating transformer CO3212-5Q 1 Media: 6 Interactive Lab Ass.: Slip-ring rotors,sync. machines, synchronisation 0.3/1 kw SO2800-1D 1 Additionally required - Machine test bench equipment set for servo-drive/braking system: 7 Servo machine test bench for 1kW machines incl. ActiveServo software(d,gb,f,e) CO3636-6W 1 8 Rubber coupling sleeve, 1kW SE2662-6A 1 9 Coupling guard, 1kW SE2662-6B 1 10 Shaft end guard, 1kW SE2662-6C 1 Lucas Nülle GmbH Page 5/7
6 11 QuickChart, Servo-machine test stand safety and operating instructions (GB) SO6200-7D 1 Power supply: 12 Universal power supply for electrical machines CO3212-5U 1 Measuring instruments: 13 Digital/analog multimeter, wattmeter, power-factor incl. software CO5127-1Z 1 Accessories: 14 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2 16 Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W 2 17 Set of safety measurement cables, 4mm (31 leads) SO5148-1L 1 18 Mobile aluminium experiment stand, 3 levels, power strip with 6 sockets, 1250x700x1995mm ST7200-3A 1 19 Protected power distribution for working stations ST8008-8M 1 20 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Lucas Nülle GmbH Page 6/7
7 21 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1 22 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs ST8010-4T 1 23 Keyboard adapter for flat screen monitor holders ST8010-4G 1 24 Protection cover for three-level experiment trolleys ST8010-9Y 1 Lucas Nülle GmbH Page 7/7
Table of Contents. 95 IMS 25 flexible manufacturing line with 5 stations. 104 IMS 26 flexible manufacturing line with 6 stations
Table of Contents Table of Contents Automation Technology IMS Industrial mechatronics system Mechatronics Sub-Systems with UniTrain-I IMS 1.2: DC transport system IMS 1.3: AC transport system IMS 3 Sorting
More informationTable of Contents. Table of Contents Pneumatik / Hydraulik
Table of Contents Table of Contents Pneumatik / Hydraulik Pneumatics with UniTrain Hydraulics with UniTrain PBC / PEC Pneumatics and Electro-Pneumatics PBC Fluid power trainer pneumatics set PBC 2 Fluid
More informationTable of Contents. Lucas Nülle GmbH Page 1/7
Table of Contents Table of Contents Electrical Power Engineering, Smart Grid Trainers "Micro Grid Trainer" - Control of stand-alone networks Supplementary to EMG 2 EPH 3 Professional Photovoltaics EPH
More informationTable of Contents. Table of Contents Electrical Power Engineering Renewable Energies EWG 2 Small wind power plant trainer
Table of Contents Table of Contents Electrical Power Engineering Renewable Energies EWG 2 Small wind power plant trainer 1 2 2 4 Lucas Nülle GmbH Page 1/23 www.lucas-nuelle.us Electrical Power Engineering
More informationTable of Contents. Table of Contents UniTrain UniTrain courses UniTrain mechatronic courses IMS 23/24 with 3/4 subsystems
Table of Contents Table of Contents UniTrain UniTrain courses UniTrain mechatronic courses IMS 23/24 with 3/4 subsystems 1 2 2 3 4 Lucas Nülle GmbH Page 1/16 www.lucas-nuelle.com UniTrain UniTrain is a
More informationTable of Contents. Lucas Nülle GmbH Page 1/36
Table of Contents Table of Contents Fluid Power PBC / PEC Pneumatics and Electro-Pneumatics PBC 11 Fluid power trainer pneumatics set PBC 12 Fluid power trainer pneumatics set PEC 11 Fluid power trainer
More informationTraining Systems for Drive Technology, Power Electronics & Electrical Machines
Training Systems for Drive Technology, Power Electronics & Electrical Machines Acquiring Hands-On, Project-Oriented Technical Competence 4 th Edition Contents Obtaining Technical Skills and Qualifications
More informationTraining Systems for Drive Technology, Power Electronics & Electrical Machines
Training Systems for Drive Technology, Power Electronics & Electrical Machines Acquiring hands-on, project-oriented technical competence Contents Obtaining Technical Skills and Qualifications through
More informationBrake Test On Three Phase Induction Motor Lab Manual
Brake Test On Three Phase Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase Slip.
More informationHybrid and Electric Vehicles
Lucas Nülle is proudly and exclusively represented in Australia and New Zealand by Better Learning Outcomes Training Systems Australia A Division of Pullman Learning Group 300 Centre Road, Bentleigh, Victoria,
More informationUNC-Charlotte's Power Engineering Teaching lab
1 UNC-Charlotte's Power Engineering Teaching lab B. Chowdhury Panel Session Title: Existing and Proposed Power Systems Laboratories for the Undergraduate Curriculum PES GM 2015 2 Outline Background - Energy
More informationES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS
ES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS The Electrical Machines Trainer is produced in consistency with the training programs of the electrical and electronics engineering and teaching departments
More informationLoad Test On 3 Phase Slip Ring Induction Motor Lab Manual
Load Test On 3 Phase Slip Ring Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase
More informationSpecifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD CNC and GRD 50Z CNC
Specifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD 32-42 CNC and GRD 50Z CNC This newly concepted drilling machine is designed for the fully automatic execution
More informationTRAINING SYSTEMS FOR ELECTRICAL POWER ENGINEERING. The Complete Power Supply Network with Renewable Energies. 6 th Edition
TRAINING SYSTEMS FOR ELECTRICAL POWER ENGINEERING The Complete Power Supply Network with Renewable Energies 6 th Edition Contents Qualifications Through Quality Training Systems for Electrical Power Engineering...
More informationRKPowerlift telescope
RKPowerlift telescope Two-stage lifting column Multi-stage lifting column - RKPowerlift telescope The RKPowerlift with optimised installation height/stroke ratio Fixing 9Adaptor 9 plate with 4x M8 holes
More informationList of major equipment in Electrical Enginerring Department Labs
High Voltage Lab (84.10sq.m) 1 150 KV Power Transformer with accessories 2 550 KV Impulse generator with accessories 3 1-Ph. ¼ HP 1425 rpm Motor 4 Surge Potentiometer 400 pfd 550KV 5 Impulse Surge Oscilloscope
More informationELECTRICAL ENGINEERING DEPARTMENT LIST OF EQUIPMENT IN EEM LAB
ELECTRICAL ENGINEERING DEPARTMENT LIST OF EQUIPMENT IN EEM LAB SL.NO. NAME OF THE INSTRUMENT SPECIFICATION 1. 3 Auto Transformer 415/415-470,15amp,15.P.3 2. 3 Resistive Load Box 1A 4,.5 2 3. Measurement
More informationPerformance Test Dynamometer for E-Bikes
Performance Test Dynamometer for E-Bikes Maturo GmbH designed the new unique dynamometer for performance testing of Pedelecs and E-Bikes based on new Standard EN 15194:2009 for EPACs (Electrically Power
More informationCustomised drive solutions
Customised drive solutions Electric motors & systems Drive components Services Introduction 03 Halm quality drive technology Over 50 years of experience in developing electric motors with asynchronous
More informationTraining & Didactic Systems. Fundamentals of Electrical Engineering
Training & Didactic Systems Fundamentals of Electrical Engineering Catalog WA1E/01 Table of Contents Page Our Service, Our Customers and fields of technology 2 Introduction 4 Instruction modules measuring
More informationRT2DB Excitation and voltage regulation system for synchronous generators
s RT2DB Excitation and voltage regulation system for synchronous generators Fully digital. Parameter settings done by software. Self monitoring routines. Maintenance free. High reliability. Excellent dynamic
More informationETATRACK active DIY
ETATRACK active 1000-1500 DIY Installation guide Before starting installation, please read installation guide carefully! 1. Safety references 1.1 General This installation instruction contains fundamental
More informationelektronik Designing vehicle power nets A single simulation tool from initial requirements to series production
www.atzonline.de elektronik 04 April 2013 Volume 8 Offprint from ATZelektronik 4/2013 Springer Automotive Media Springer Fachmedien Wiesbaden GmbH for Bosch Engineering Designing vehicle power nets A single
More informationgarage door operators
garage door operators Application area SOMMER garage door operators are suited for the following types of doors: sectional doors swing doors canopy doors (with special accessory) horizontal sectional doors
More informationRKPowerlift. Two-stage lifting column
RKPowerlift Two-stage lifting column Two-stage lifting column - RKPowerlift The power pack for high bending moments Fixing 99Tapped hole for simple mounting classic design technic design wave design Fixing
More information14th Edition MECHANICAL SECTIONS TRAINING EQUIPMENT
14th Edition MECHANICAL SECTIONS TRAINING EQUIPMENT M A D E IN IT A L Y Simulators VB 4503 VB 4503E HYBRID AND ELECTRIC SYSTEM SIMULATOR - electrical This simulator allows the study of all the operating
More informationThree-Phase Motors and Drives
Unit 63: Three-Phase Motors and Drives Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose K/600/7117 BTEC Nationals This unit aims to give learners knowledge of three-phase
More informationLED system light Sensationally bright
LED system light Sensationally bright 2 Rittal LED system light LED system light Perfect enclosure illumination The most innovative lighting technology, tailored to Rittal enclosures. Do not settle for
More informationHeat. Determining the efficiency of the hot-air engine. as a heat engine. LEYBOLD Physics Leaflets P Wei
Heat Thermodynamic cycle Hot-air engine: quantitative experiments LEYBOLD Physics Leaflets P2.6.2.2 Determining the efficiency of the hot-air engine as a heat engine Objects of the experiments Measuring
More informationGENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER
XXXX H02 GENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER XXXX CONTROL OR REGULATION OF ELECTRIC MOTORS, GENERATORS, OR DYNAMO-ELECTRIC CONVERTERS; CONTROLLING TRANSFORMERS, REACTORS OR CHOKE
More informationDevelopment test stands for E-motors
Development test stands for E-motors Standardized design for DC and EC/BLDC motors imc DCcompact & imc ECcompact standard test stands are well-proven and quickly available. imc productive testing www.imc-berlin.com/electric-motor-testing/
More informationAluminium Profile Catalog Version 1.0 English
Aluminium Profile Catalog - 2008 Version 1.0 English Product Range Aluminium Profile and Accessories - Extruded aluminium profiles - Joining elements - Levelling feet - End covers and slot covers Assembly
More informationEMMS3 ELECTRICAL MACHINES MODULAR SYSTEM 300W
EMMS3 ELECTRICAL MACHINES MODULAR SYSTEM 300W INDEX 1.1 - EMMS -GENERAL DESCRIPTION....1 - EMMS -EXPERIMENT MANUALS... 3 3.1 - POWER SUPPLY MODULE... 4 4.1 - D.C. MACHINES... 5 5.1 - A.C. MACHINES... 6
More informationELECTRIC MACHINES EUROLAB 0.3 kw
index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More informationMONO - MOTRONIC 0309 En
02.1992 MONO - MOTRONIC 0309 En Published by: Robert Bosch GmbH Division KH After-Sales-Service Department for Training and Technology (KH/VSK) Please direct questions and comments concerning the contents
More informationLZ 60 Electric cylinder
LZ 60 Electric cylinder The industrial design complete system with push/pull forces up to 4000 N. LZ 60 S External control Range of connecting options: - Up/down mono operation - PLC - synchronous control
More informationCable Temperature QAP... Sensor. Use
1 831 1847P01 Cable Temperature Sensors QAP... Use The sensors are used in heating, ventilation and air conditioning plants to acquire the temperature. They are for use with the corresponding accessories
More informationflowtronic Sensor Series S8005 flowtronic Sensor Series S8005 Product Information Version GREGORY Technology GmbH
Product Information Version 11.04.2016 GREGORY Technology GmbH www.flowtronic.de Introduction The flowtronic sensors are developed for fuel consumption measurement of internal combustion engines. Today
More informationrenewable energy and energy efficiency
renewable energy and energy efficiency Integral equipment for the classroom-workshop Our in-depth knowledge of the educational world allows us to design classroomworkshops configured down to the last detail
More informationCatalogue with selected Topics. Automation Electrical machines Power Electronics
www.elwe.com www.elwe-energy.com EN ISO 9001:2000 Certified Company innovative future oriented high-performance Education is the future Catalogue with selected Topics Automation Electrical machines Power
More informationELECTRIC MACHINES UNILAB 1 kw
index SINGLE-PHASE MOTORS SPLIT PHASE MOTOR DL 1028 CAPACITOR MOTOR DL 1028C UNIVERSAL MOTOR DL 1029 REPULSION MOTOR DL 1029R THREE-PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More informationEEE3441 Electrical Machines Department of Electrical Engineering. Lecture. Introduction to Electrical Machines
Department of Electrical Engineering Lecture Introduction to Electrical Machines 1 In this Lecture Induction motors and synchronous machines are introduced Production of rotating magnetic field Three-phase
More informationElectric cylinders. Performance class 2
Electric cylinders Performance class 2 Cylinders - performance class 2 LH15 Electric cylinder LAMBDA Electric cylinder LZ60 Electric cylinder (here with motor fitted in parallel) Features: Wide range of
More informationBlue e+ chillers with the principle
Blue e+ chillers with the principle Blue e+ chillers The world s most efficient range of chillers. The principle: Efficient Energy savings of up to 70% thanks to DC inverter technology Flexible Worldwide
More informationMODEL HM A01
BREAKER HAMMER MODEL HM800 06-03 5 4 3 2 0 9 8 7 6 5 4 3 2 6 7 8 36 35 32 3 30 9 20 25 26 24 23 22 2 29 28 27 57 56 55 54 53 52 5 50 49 48 47 46 45 44 43 42 39 4 40 4 38 37 34 33 2 3 A0 23 2 Model HM800
More informationPlanning and Commissioning Guideline for NORD IE4 Synchronous Motors with NORD Frequency Inverters
Getriebebau NORD GmbH & Co. KG Getriebebau-Nord-Straße 1 22941 Bargteheide, Germany www.nord.com Planning and Commissioning Guideline for NORD IE4 Synchronous Motors with NORD Frequency Inverters General
More informationSliding Door Fittings, Roller Shutters Vertical Sliding Door Fittings
Vertico 16 VF, door weight up to 15 kg, for 2 bi-parting doors Door height: 300 600 mm Door thickness: Min. 16 mm Side panel thickness: Min. 1 mm Running gear: Top and bottom running, 4 rollers, with ball
More informationOperating Instructions Control 330 Conductivity meter
Operating Instructions Conductivity meter Art.-no.: 04.1805 Art.-no.: 04.1805-SV Art.-no.: 04.1805-SVE Art.-no.: 04.1806 Art.-no.: 04.1806-SV Art.-no.: 04.1806-SVE Art.-no.: 04.1807 Art.-no.: 04.1807-SV
More informationMotor Drives Training System (Stand-Alone, 120 V Version) (8036-C0)
Motor Drives Training System (Stand-Alone, 120 V Version) 581526 (8036-C0) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 11/2018 Table of Contents General Description 2 List of Equipment 2 List
More informationPRODUCT GUIDE Version 2004:02 For a better workbench environment
PRODUCT GUIDE Version 2004:02 For a better workbench environment FILTRONIC AB Box 2284, SE-531 02 LIDKÖPING SWEDEN Tel +46 (0)510-208 10, Fax +46 (0)510-201 40 e-mail: office@filtronic.se www.filtronic.se
More informationCatalogue: TEH_02H. Hardware for Sliding Doors (Timber)
Catalogue: TEH_02H Hardware for Sliding Doors (Timber) Hardware for Sliding Doors (Timber) Contents Information Introduction HELM Hardware for Timber Sliding Doors HELM Accessories HELM Modular.Concept
More informationHBI 22. Integrated Three-phase Synchronous Drive
HBI 22 Integrated Three-phase Synchronous Drive positioning capability up to 9 Watts rated output power with linear hall sensor system with or without parking brake Motor type Dimension L1 L2 HBI 223 125
More informationInstruction sheet
06/05-Hke/Sel Instruction sheet 388 182 Hot-air engine (388 182) 1 Description The hot-air engine is a reproduction of the Stirling engine optimized for educational purposes. Its cylinder and the displacement
More informationPlanning and Commissioning Guideline for NORD IE4 Motors with NORD Frequency Inverters
Planning and Commissioning Guideline for NORD IE4 Motors with NORD Frequency Inverters General Information From their basic function, motors with efficiency class IE4 are synchronous motors and are suitable
More informationWORK BENCHES FOR ELECTRIC INSTALLATIONS. index
index WORK BENCHES TWO PLACE WORK BENCH WITH 2 INDEPENDENT SUPPLIES DL 1101 FOUR PLACE WORK BENCH WITH 4 INDEPENDENT SUPPLIES DL 1103 FOUR PLACE WORK BENCH WITH 2 INDEPENDENT SUPPLIES DL 1104 TWO PLACE
More informationElectrical Machines-I (EE-241) For S.E (EE)
PRACTICAL WORK BOOK For Academic Session 2013 Electrical Machines-I (EE-241) For S.E (EE) Name: Roll Number: Class: Batch: Department : Semester/Term: NED University of Engineer ing & Technology Electrical
More informationIPL, Automower 305, , Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar
IPL, Automower, 580 37 86-01, Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar A AUTOMOWER COVER 1 2 4 6 5 7 3 8 9 10 12 13 14 17 15 16 18 PAGE A AUTOMOWER COVER Position
More informationGARDENA. Robotic Lawn Mower R40Li/R45Li. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar
IPL, Gardena Robotic Lawn Mower, 2013-01, 581 87 76-01 Robotic Lawn Mower 2013 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar A COVER 1 3 2 4 5 6 7 8 10 9 11 10 13 12
More information"...Let things run smoother - HELM technologie"
Group 14 a -aluminium- ALUMINIUM LIGHT CRANE SYSTEM "...Let things run smoother - HELM technologie" - Individual solution for every workplace - Extreme load-bearing capacity - Extensive accessories upon
More informationOverload Relays. SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A for standard applications. 5/78 Siemens IC Overview
SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors.
More informationEvent. Road construction. Event. Mobile fence. Building construction. Civil engineering. Storage equipment. Transport equipment
42 Crowd barrier Urban Equipment Building Equipment Crowd barrier type D steel construction of Ø 33.7 mm round tube, hooks and connection brackets are welded to the sides for combining several elements,
More informationA Practical Primer On Motor Drives (Part 11): AC And DC Motor Types
A Practical Primer On Motor Drives (Part 11): AC And DC Motor Types by Ken Johnson, Teledyne LeCroy, Chestnut Ridge, N.Y. ISSUE: December 2016 In the previous part in this series, the basic principles
More informationElectrical Machine Service. Overhaul, Conditioning, On-Site Service and Diagnostics. Excellent Technology, Efficiency and Quality
World Class Power Solutions Excellent Technology, Efficiency and Quality Electrical Machine Service Overhaul, Conditioning, On-Site Service and Diagnostics 2 3 Your partner for Electrical Machine Service
More informationR13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]
Code No:RT32026 R13 SET - 1 III B. Tech II Semester Regular Examinations, April - 2016 POWER SEMICONDUCTOR DRIVES (Electrical and Electronics Engineering) Time: 3 hours Maximum Marks: 70 Note: 1. Question
More informationThe SINOCHRON Motor - The Energy saver amongst Electric Motors
The SINOCHRON Motor - The Energy saver amongst Electric Motors The new energy efficiency directives of electric drive units make high demands on motors. Many users have to ask the question if they need
More informationVOLUME: IIIC SCHEDULE IIIC/4 11 KV AND 3.3 KV SWITCHGEARS
VOLUME: IIIC SCHEDULE IIIC/4 11 KV AND 3.3 KV SWITCHGEARS A. 11 KV SWITCHGEAR 1.0 SWITCHGEAR ASSEMBLY 1.1 Make : 1.2 Type : 1.3 Reference Standard : 1.4 Voltage (Nom./Max.) KV : 1.5 Phase, Frequency No,Hz.
More informationELECTRIC MACHINES EUROLAB 0.3 kw
index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More informationFeatures of PSEC Educational Programs
Power Systems & Energy Course 2018 These intensive four-week programs are designed to strike the necessary balance between energy systems engineering theory and relevant, real-world applications. With
More informationGRIDCON ACF ESS GREAT COMBINATION ACTIVE FILTER AND ENERGY STORAGE.
GRIDCON ACF ESS GREAT COMBINATION ACTIVE FILTER AND ENERGY STORAGE. WWW.REINHAUSEN.COM SAMSUNG ESS INSIDE 1 GRIDCON ACF ESS 2 ENERGY STORAGE SYSTEMS IMPROVE FLEXIBILITY. Energy storage systems are an attractive
More informationAC Synchronous Reluctance motors
AC Synchronous Reluctance motors AC Synchronous Reluctance Motors Invented many years ago but developed for production in series only recently the Synchronous reluctance motors combine the advantage of
More informationStromag Dessau. safety in motion PRODUCT CATALOGUE. NFF4F-LS Brake. for Slow-Running High Torque Drivelines, in harsh environment
Stromag Dessau safety in motion PRODUCT CATALOGUE NFF4F-LS Brake for Slow-Running High Torque Drivelines, in harsh environment ENGINEERING THAT MOVES THE WORLD Applications Holding brake variations with
More informationSALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS
SALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS Relay Test Bench: LIST OF TEST EQUIPMENT 1. FIVE STATION BIMETAL OVERLOAD RELAY TEST BENCH 2. TWENTY FOUR STATION RELAY HEATING
More informationLED RGB spots installation guide
Page 1 Page 2 Installation of the mounting sleeves for LED spots in GFK / plastic or aluminium ceilings Coated side of the steam room Coated side of the steam room Boring, inner diameter 42mm PVC nut 1-1/4
More informationelectronic control of electrical machines
electronic control of electrical machines Integral equipment for the classroom-workshop Our in-depth knowledge of the educational world allows us to design classroomworkshops configured down to the last
More informationgarage door operators
garage door operators duo vision separate control unit with integrated interior pushbutton Optional designer control housings other control unit housings with different finishes (ask about further designs)
More informationBionic Fish Bionic fish with Fin Ray Effect
-1 Bionic Fish Bionic fish with Fin Ray Effect Equipment Required items from the Bionics Kit: Additionally required: 2 Festo AG & Co. KG Festo Didactic SE Bionics4Education Instructions Required items:
More informationhps Accessories Bench and Demonstration Racks Mechanical Accessories
hps Accessories Bench and Demonstration Racks Mechanical Accessories hps SystemTechnik Lehr- + Lernmittel GmbH Altdorfer Strasse 16 88276 Berg / Germany Phone: + 49 751 /5607580 Telefax: + 49 751 /5607517
More informationBionic Chameleon A gripper inspired by the chameleon tongue
-1 Bionic Chameleon A gripper inspired by the chameleon tongue Equipment Required items from the Bionics Kit: Additionally required: 2 Festo AG & Co. KG Festo Didactic SE Bionics4Education Instructions
More informationSolenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and servo operated versions, they can be applied in liquid, suction, and hot
More informationElectrical Machines. Unit level 4 Credit value 15. Introduction. Learning Outcomes
Unit 21: Unit code Electrical Machines A/615/1495 Unit level 4 Credit value 15 Introduction Electrical machines can be found in manufacturing, transport, consumer appliances and hospitals. People will
More informationMotor-Generator and Transformer Construction Application AEL-MGTC
Engineering and Technical Teaching Equipment Motor-Generator and Transformer Construction Application AEL-MGTC INDUCTION MOTOR DISASSEMBLY ISO 9001: Quality Management (for Design, Manufacturing, Commercialization
More informationStarting of Induction Motors
1- Star Delta Starter The method achieved low starting current by first connecting the stator winding in star configuration, and then after the motor reaches a certain speed, throw switch changes the winding
More information185mm-System power 2500A. Expertise
185mm-System power 2500A Expertise System advantages The 185mm-System power is designed for use in efficient power distribution assemblies with a high short-circuit withstand capacity. The narrow design
More informationAPPENDIX B SPECIFICATION FOR GENERATOR OVERHAUL EMD MODEL AR10 D18... B-1
Table of Contents APPENDIX B SPECIFICATION FOR GENERATOR OVERHAUL EMD MODEL AR10 D18... B-1 B.01 SCOPE... B-1 B.02 GENERAL... B-1 B.03 ELECTRICAL QUALIFICATION... B-1 B.04 EQUIPMENT RECONDITIONING... B-2
More informationEPE 18 ECCE Europe: LIST OF KEYWORDS
EPE 18 ECCE Europe: LIST OF KEYWORDS AC machine AC-cable AC/AC converter Accelerators Acoustic noise Active damping Active filter Active Front-End Actuator Adaptive control Adjustable speed drive Adjustable
More informationEnergy Efficiency with Low Voltage Motors
Energy Efficiency with Low Voltage Motors Mining and Industrial Energy Optimisation Energy Efficiency Seminars 2010 Energy efficiency The issue Without appropriate actions the prognosis is that world energy
More informationSyllabus for the Trade of Electrician Duration : Six Month Second Semester Semester Code: ELE: SEM II
Syllabus for the Trade of Electrician Duration : Six Month Second Semester Semester Code: ELE: SEM II Week Trade practical No. 1-2 Different wave shapes of rectifiers and their values using C.R.O. Identification
More informationSSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL ELECTRICAL MACHINES
1 SSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL 28-B/7, Jia Sarai, Near IIT, Hauz Khas, New Delhi-110016. Ph. 011-26514888. www.engineersinstitute.com 2 CONTENT 1. : DC MACHINE,
More informationBRAKE TESTERS. BD-series Truck New Generation BEISSBARTH BRAKE TESTERS FOR TRUCKS VOL 1
BRAKE TESTERS BD-series Truck New Generation BEISSBARTH BRAKE TESTERS FOR TRUCKS VOL 1 1 BD 7xxx/8xxx: New generation of Beissbarth brake testers for trucks Complying with German 29 StVZO (VkBl. 09/2011)
More informationConnection of Power Generating Modules to DNO Distribution Networks in accordance with EREC G99
Connection of Power Generating Modules to DNO Distribution Networks in accordance with EREC G99 Version 1 August 2018 www.energynetworks.org 2 Introduction Connection of Power Generating Modules to DNO
More informationTHE SPECIALIST WHERE LOTS OF SPACE IS NEEDED
80 endo-cart 81 THE SPECIALIST WHERE LOTS OF SPACE IS NEEDED endo-cart was designed especially to meet the special challenges in operating theatres. This is where every second counts and each movement
More informationLINEAR MOTORS. Technology of linear motors
LINEAR MOTORS Since linear motors do not have any gear unit it is more simple converting motion in electrical drives. Combined with magnet floating technology an absolutely contact-less and so a wear resistant
More informationThe Wound-Rotor Induction Motor Part II
Experiment 2 The Wound-Rotor Induction Motor Part II OBJECTIVE To determine the starting characteristics of the wound-rotor induction motor. To observe the rotor and stator currents at different motor
More information8036-A0 Motor Drives Training System (Stand-Alone)
8036-A0 Motor Drives Training System (Stand-Alone) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 04/2018 Table of Contents General Description 2 List of Equipment 2 List of Manuals 2 Table of
More informationBeissbarth Easy Tread
Beissbarth Easy Tread Tire Tread Measuring with Leading Edge Technology Tire tread measurement in seconds Measurements starts as the vehicle passes over Precision & long live thanks to advanced camera
More informationMOTORS. Part 2: The Stepping Motor July 8, 2015 ELEC This lab must be handed in at the end of the lab period
MOTORS Part 2: The Stepping Motor July 8, 2015 ELEC 3105 This lab must be handed in at the end of the lab period 1.0 Introduction The objective of this lab is to examine the operation of a typical stepping
More informationAccessories CEILING SUPPLY UNITS. Planning Documentation. Technical Specifications and Dimensions
Accessories Technical Specifications and Dimensions Pneumatik Berlin GmbH PTM Falkenberger Straße 40 D-13088 Berlin Germany Tel: +49 / 30 / 92 70 10 0 Fax: +49 / 30 / 926 81 32 info@pneumatik-berlin.de
More informationConnection of Power Generating Modules to DNO Distribution Networks in accordance with EREC G99
Connection of Power Generating Modules to DNO Distribution Networks in accordance with EREC G99 Version 2, January 2019 www.energynetworks.org 2 Introduction Connection of Power Generating Modules to DNO
More information