Standard program. Standard tools....convincing solutions

Transcription

1 Standard program Standard tools...convincing solutions

2 INFO Screwdrivers range Industrial quality The HAUPA screwdriver series features: homogenous size adjustment of the screwdriver handles for better power transmission. Enlargement of soft zone elegant, ergonomically shaped, non-slip 2-component handles made from PP/TPE material injected blade profile, for easy access in the tool case. Abrasion not possible! magnetic blade for secure hold of screws High-gripsystem blade made from molybdenum vanadium steel an addition anti-slip protection on Phillips profiles prevents the tool from slipping out of the screw 2-component screwdrivers 2-component Engineers screwdrivers with 2-component handle made from PP/TPE material, blade made from molybdenum- vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point Art. no. BL CW TL , , , , , ,238 2-component cross slotted screwdrivers Phillips with 2-component handle made from PP/TPE material, blade made from molybdenum- vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point Roll repressive Art. no. size BL TL , , , ,6 2-component cross slotted screwdrivers Pozidriv with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point Art. no. size BL TL , , ,60 2-component screwdrivers Tx with 2-component handle made from PP/TPE material, blade made from molybdenum- vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point 2-component Electricians screwdrivers with 2-component handle made from PP/TPE material, blade made from molybdenum- vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point Art. no. BL CW TL ,5 60 0, , , , , ,074 Art. no. size BL TL 0229/ , ,036 2-component screwdrivers Tx with security pin with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point Art. no. size BL TL , , , , , , , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

3 2-component screwdrivers 2-component Electricians screwdrivers with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered Art. no. BL CW TL ,5 60 0, , , , , , ,078 2-component Engineers screwdrivers with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered Art. no. BL CW TL , , , , , ,24 2-component cross slotted screwdrivers Phillips with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered Art. no. size BL TL , , , ,47 2-component cross slotted screwdrivers Pozidriv with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered Art. no. size BL TL , , ,46 2-component Screwdriver set with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered. Contents: 2 electricians screwdrivers 2 engineers screwdrivers 2 screwdrivers Phillips Art. no PH 6-pieces 0,43 2-component Screwdriver set with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered. Contents: 2 electricians screwdrivers 2 engineers screwdrivers 2 screwdrivers Pozidriv Art. no PZ 6-pieces 0,429 2-component screwdriver set Tx screwdriver set Tx with security pin, with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point, 5-pieces. Contents: screwdriver each Tx 0, Tx 5, Tx 20, Tx 25, Tx 30 Art. no. 022/S Tx with security pin 5-pieces 0,337 2C-Stubby gasifier screwdrivers with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished Art. no. BL CW TL , ,05... convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

4 2-component screwdrivers 2C-Stubby gasifier cross slot screwdrivers Phillips with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished Art. no. size BL TL , ,05 2C-Piercing awls with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished INFO ESD electronic screwdrivers Now with 2-component handle, these screwdrivers do not just convince because of their homogenous design, but also because of their user-friendly handle. Benefits: chrome molybdenum vanadium steel blades hardened throughout two component handels, hard and soft components permanently discharging special synthetic material Quick rotating zone rotating centring head with recessed grip black precision tips chromed blade quick rotating zone oval rotating cap with recessed grip Art. no. BL form round point 0, square point 0,085 2-component soft handle with black tip Blade made from chrome molybdenum vanadium steel, chromed 2-component socket wrenches with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished Art. no. BL TL WS , ,5 0, , , , , , , ,7 2-component socket wrenches set with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, 7-pieces. Contents: piece each 5-5, mm ESD electronic screwdrivers Blade made from chrome molybdenum vanadium steel, chromed with black tip, slotted Art. no. BL CW TL ,8 50 0, ,0 50 0, A 60,2 50 0, ,5 50 0, ,5 50 0, ,6 50 0, ,0 50 0, ,4 75 0, , ,020 ESD electronic screwdrivers Blade made from chrome molybdenum vanadium steel, chromed with black tip, cross recess, Philipps Art. no ,898 Industrial screwdriver set with replaceable dual blades. 2-component screwdriver shaft with 0 interchangeable blades, hexagonal, Material: bit steel S2, (chrome silicon manganese molybdenum vanadium steel), in a stable metal case. Replaceable blades are also available loose. Blade types: Slotted 3, 4, 5, 7 Phillips 0,, 2, 3 Pozidriv 0,, 2, 3 Tx 0, 5, 20, 25 Hexagonal 2, 3, 4, 5 Art. no. size BL TL , , , ,07 ESD electronic screwdrivers Blade made from chrome molybdenum vanadium steel, chromed with black tip, hexagonal Art. no. size BL TL WS 00728, ,5 0, , ,0 0, A 2, ,5 0, , ,0 0,020 Art. no piece, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

5 Electronic screwdrivers ESD electronic screwdrivers Blade made from chrome molybdenum vanadium steel, chromed with black tip, Tx/Safety Tx Art. no. size BL TL , , A , , , , , , ,020 ESD electronic screwdrivers Blade made from chrome molybdenum vanadium steel, chromed with black tip, Tri-Wing Art. no. size BL TL , ,07 ESD electronic screwdriver set Blade made from chrome molybdenum with 2-component handles, 7-pieces, slotted/cross recess. Contents: ESD electronic screwdriver each.6 x 50, 2.0 x 50, 2.4 x 50, 3.0 x 50 and Phillips size. 0 and 00 x 50 each Art. no pieces 0,225 HAUPA Electronic screwdriver set standard chrome vanadium steel, chrome-plated, with large plastic handle, with black point, 7 pieces. Contents: Electricians screwdriver size.6 x 50, 2.0 x 50, 2.4 x 50, 3.0 x 50, and Phillips size, 0 and 00 x 50 Art. no pieces 0,22 Electronic screwdriver set Chrome vanadium steel, screw holder with black /green plastic handle, 4 x hex head 3, 4, 5, 6 and 8 exchangeable screwdriver blades (slot/phillips/tx head) Art. no pieces 0,288 Electronic screwing bit set Chrome vanadium steel, screw holder with black/green plastic handle, bit holder, 2 nuts of mm, 30 bits for slot/phillips/pozidriv/tx/hex head Art. no pieces 0,230 Precision screwdrivers Flexible screwdrivers Piccolo with pliable, plastic coated shank, plastic handle Art. no. BL CW TL , ,020 Claw retrievers with flexible shaft, chrome-plated, for gripping and retrieving of small parts in normally inaccessible places , convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

6 Precision screwdrivers Claw retrievers with inflexible shaft, chrome-plated, for gripping and retrieving of small parts in normally inaccessible places Allen keys Allen keys set chrome vanadium steel, (59 Cr-Mo-V 4), DIN 9, chromium-plated, on key ring. Contents: size 2, ,050 Checking mirrors with double ball joint ,028 Checking mirrors with illumination, flexible shaft and plastic handle, 3 interchangeable mirrors mm, with battery Art. no. WS quantity , ,250 Allen keys set chrome vanadium steel, (59 Cr-Mo-V 4), im metal clip, key bronzed, DIN 9. Art : 2, mm Art :,5-2, mm Art : 2, mm Art : 3/32-/8-5/32-3/6-/4-5/6 AF Art : /6-5/64-3/32-/8-5/32-3/6-7/32 AF Art : 3/32-/8-5/32-3/6-/4-5/6-3/8 AF Art. no. WS quantity , , , , , ,335 Allen keys set chrome vanadium steel, (59 Cr-Mo-V 4), im metal clip, key bronzed, DIN ,69 Magnetic retriever flexible shaft and plastic handle ,097 Miniature trimming set 9-pieces Art. no. WS quantity /33"-5/6" 6 0, /6"-7/32" 7 0, /32"-3/8" 7 0,328 Keys set Tx chrome vanadium steel, (59 Cr-Mo-V 4), in metal-clip, surface black, keys black. Contents: TX Art. no. size quantity TX ,260 Art. no pieces 0,97 Ball point allen keys chrome vanadium steel, (59 Cr-Mo-V 4), im metal clip, black keys, DIN 9 Contents: size Art. no. WS quantity , , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

7 Allen keys Allen keys DIN 9 chrome vanadium steel, (59 Cr-Mo-V 4), DIN 9, chromium-plated WS Inch x4,5 /6" 0, x6 2 5/64" 0, x8 2,5 3/32" 0, x20 3 /8" 0, x25 4 5/32" 0, x28 5 3/6" 0, x32 6 /4" 0, x36 8 5/6" 0, x40 0 3/8" 0, x45 2 0, x50 3 /2" 0,202 Ball point allen keys chrome vanadium steel, (59 Cr-Mo-V 4), DIN 9, chromium-plated WS x8 2,5 0, x20 3 0, x25 4 0, x28 5 0, x32 6 0, x36 8 0, x40 0 0,02 Allen keys set chrome vanadium steel, (59 Cr-Mo-V 4), chromium-plated, DIN 9, 8 pieces in handy plastic box, with sliding plexiglasscover. Contents: size Art. no. WS quantity ,303 Ball point allen keys chrome vanadium steel, (59 Cr-Mo-V 4), DIN 9, chromium-plated, 8 pieces in handy plastic box, with pushable plexiglasscover. Contents: size Art. no. WS quantity ,30 Allen keys set Tx chrome vanadium steel, (59 Cr-Mo-V 4), 8 pieces in handy plastic box, surface black. Contents: TX Art. no. size quantity 0094 TX , convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

8 Voltage testers VDE/GS-Voltage testers, VDE-tested 0426/72 with clear-transparent, shock-resistant plastic handle. Art. No each in wallet Art. No loose INFO Bits Industrial quality HAUPA-Bits are made of high-alloyed tool steel, best hardened (H Rc 60-63). They show very high tenacity and tolerance. The long life speakes of the hard use and quality. Art. no. BL TL TMA x , x , x3, , x3, ,032 Voltage tester Finnlish type, Cellidor, only available for Finland box = 0 pieces (self-service packaging) Art. no. BL TL TMA x ,06 Voltage tester VDE/GS with retactable screwdriver blade Art. no. BL TL TMA x ,020 Voltage testers VDE/GS 5 mm surounding hand-protection, clip of insulating material, fixed installed scale with dark bacround Screwdriver bits DIN 326, form E 6,3, shank /4, 0 pieces on card Art. no. size CW TL 020 0,6x4,5 4,5 50 0, ,8x5,5 5,5 50 0,5 Screwdriver bits DIN 326, form E 6,3, shank /4, 0 pieces on card TMA ,036 Art. no. size TL 0252 PH 25 0, PH , PH TiN 25 0, PH 2 TiN 25 0, PH 50 0, PH , PH TiN 50 0, PH 2 TiN 50 0, PH 90 0, PH , PH TiN 90 0, PH 2 TiN 90 0, PH 50 0, PH ,358 Screwdriver bits, red. DIN 326, form E 6,3, shank /4, 0 pieces on card Art. no. size TL , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

9 Bits Screwdriver bits DIN 326, form E 6.3, shank /4, 0 pieces on card Art. no. size TL 0276 PZ 25 0, PZ , PZ TiN 25 0, PZ 2 TiN 25 0, PZ 50 0, PZ , PZ TiN 50 0, PZ 2 TiN 50 0, PZ 90 0, PZ , PZ TiN 90 0, PZ 2 TiN 90 0, PZ 50 0, PZ ,360 Screwdriver bits Tx DIN 326, form E 6.3, shank /4, 0 pieces on card Art. no. size TL Tx , Tx , Tx , Tx , Tx , Tx , Tx ,2 Bits for PZ slot profile The PZ/FL profile can only be used for combination screws that were previously screwed with a slot or recessed head PZ type screwdriver. The screws have an inner PZ profile with an additional cross slot that also allows it to be screwed with a slot screwdriver PU (packaging unit) = 2 pieces Art. no. size TL , ,03 Magnetic holder with strong magnetic, shank /4, form C 6,3 DIN 326, for holding the screws, socket made of stainless steel, suitable for all ,056 SDS magnetic holder with strong permanent magnet, bit holder /4, form C 6.3 DIN 326, to hold screws, rust-free, stainless steel sleeve, suitable for SDS bits holders ,045 Magnetic holder with strong magnetic, shank /4, form C 6.3 DIN 326, for holding the screws, socket made of stainless steel, with inside ring, suitable for all , ,040 HAUPA Bit box Description: Belt clip Ergonomic (with the opening of the box the bits will be moved in 45 angle, easy pick up position) A special mechanism fixes the bits even in an up side down position Contents: 7-pieces Screwdriver bits, form E 6.3, shank /4, 25 mm PH:, PH 2, PH 3 PZ:, PZ 2, PZ3 Tx: 0, T 5, T 20, T 25 slotted: 4.0 (0.5), 5.0 (0.8), 5.0 (.0), 6.0 (.0) hexagon: 4.0, 5.0, 6.0 Magnetic holder 60 mm Art. no pieces 0,70... convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

10 Bits HAUPA ratchet screwdriver Flex Ratchet screwdriver with right/left hand motion. Adjustable operating angle of 80. Safety and special bit set - top quality S2! The screwing grasp also Quick change penholder and 2-components Handle provides for anti-slip and fatiguefree working. The ergonomic form and the soft zones within the pressure area range make a relaxed possible screws. With hanging up hole. Art. no , HAUPA ratchet screwdriver set Flex Ratchet screwdriver with right/left hand motion. Adjustable operating angle of 80. Safety and special bit set - top quality S2! The screwing grasp also Quick change penholder and 2-components Handle provides for anti-slip and fatiguefree working. The ergonomic form and the soft zones within the pressure area range make a relaxed possible screws. With hanging up hole. Advantages: Ratchet function Left/clockwise rotation adjustable Bending bar: Ergonomic working within restrained ranges S2 steel industry bit for nearly all applications 2-components handle 55 bits and adapter for ¼ nut Art. no pieces 0,80 88 TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

11 Standard program Socket sets...convincing solutions

12 Spanners Double ended spanners acc. to DIN 30 chrome vanadium steel, bright chromium-plated, head polished, offset at 5 Combination spanners similar to DIN 33 chrome vanadium steel, chromium-plated, head polished, offset at 5 WS strength ,2 0, ,5 0, ,0 0, ,5 0, ,0 0, ,5 0, ,0 0, ,0 0, ,0 0, ,2 0,59 Double ended spanners set acc. to DIN 30 chrome vanadium steel, chromium-plated, head polished, in plastic bags. WS , , , , , , , , , , , , , , , ,40 Combination spanners similar to DIN 33 chrome vanadium steel, bright chromium-plated, head polished, in plastic bags. Art. no. WS pieces 0, pieces 2,353 Double ended ring spanners to DIN 838 chrome vanadium steel, bright chromium-plated, head polished, offset at 75 WS , , , , , , , , ,6 Double ended ring spanner sets DIN 838 chrome vanadium steel, bright chromium-plated, head polished, in paper box Art. no. WS pieces,44 Combination spanners similar to DIN 33 chrome vanadium steel, bright chromium-plated, head polished, in paper box Art. no. WS pieces,948 Open-jawed ring wrench with ratch function Open-jawed ring wrench with ratch function made from chromium-vanadium steel, chromed surface, polished, fine-toothed, 72 teeth, swing angle 5, ring side 3 angled, DIN 33, ISO 338, in a practical plastic box, wrench size mm Art. no. WS pieces, pieces 2,45 Art. no. WS piece, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

13 Socket sets Adjustable single-head wrench Adjustable single-head wrench with ratch function made from chromiumvanadium steel, forged, chromed, DIN 37, handle made from TPR, with lasered measuring scale Art. no. size TL , , , , Adjustable single-head wrench with ratch function Adjustable single-head wrench with ratch function made from chromium-vanadium steel, fast and effective working, use of singlehead wrench does not need to be discontinued, forged, chromed, DIN 37, handle made from TPR, with lasered measuring scale, mounting with anti-theft device and function test Art. no. size TL , ,342 Socket set chrome vanadium steel, Profi -quality GS-tested, black plastic case, /4. Contents: 2 Sockets: mm, ratchet handle, 72 gears with quick release function, 4 insert bit socket PH: - 2-3, HX: , TX: , flexible extension bar, 2 extension bars 50 & 00 mm, universal joint, sliding T-bar, spinner handle for screwdriver Art. no pieces,05 Socket set chrome vanadium steel, Profi -quality GS-tested, black plastic case, 3/8. Contents: 8 Sockets: mm, ratchet handle, 72 gears with quick release function, universal joint, sliding head for extension bar work as T handle, 2 spark plug sockets 6 & 2 mm, 3 extension bars mm Art. no pieces 2,309 Socket set chrome vanadium steel, Profi -quality GS-tested, black plastic case, /2. Contents: 20 Sockets: mm, ratchet handle, 72 gears with quick release function, extension bar, safety locking type 250 mm, extension bar 25 mm, sliding T-bar 300 mm, universal joint Art. no pieces 4,739 Socket set chrome vanadium steel, Profi -quality GS-tested, black plastic case. Contents: /4 : 2 Sockets mm, ratchet handle, universal joint, sliding head for extension bar work as T handle, 2 extension bars mm, spinner handle for screwdriver, 2 insert bit sockets: PH: -2, HX: , FD: 5.5-7, TX: , 5 Hex keys: mm /2 : 3 sockets mm, ratchet handle, 2 extension bars mm, sliding head for extension bar work as T handle, 2 plug sockets, universal joint Art. no pieces 4,385 Spanners for switch-cabinets made of metal for hight torques, small size, low weight, with chain inside square 6 mm, inside square 7-8 mm, inside threesquare 7-8 mm, double size 3-5 mm Art. no. size x 72 0, convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

14

15 Standard program Pliers...convincing solutions

16 INFO 2-component pliers Industrial quality Pliers range with 2-component handles made of highquality, non-slip, thermoplastic elastomer. 2-component pliers Black Line 2-component combination pliers DIN 5746 alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated, for soft wire and hard wire Chrome plated, cutting edges inductive hardened slipping protection soft hard ,0 2,0 0, ,0 2,2 0, ,2 2,5 0,40 2-component side cutters DIN 5749 alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated, for soft wire and hard wire slim shape for easy handling soft hard ,0,8 0, ,0 2,0 0,237 2-component heavy duty side cutters DIN 5749 alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated, for soft wire and hard wire reinforced handle for maximum cutting force soft hard ,0 2,7 0, ,2 3,0 0,326 2-component long flat nose pliers DIN 5745 alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated ,55 94 TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

17 2-component pliers Black Line 2-component long round nose pliers DIN 5745 alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated ,53 2-component long chain nose pliers DIN 5745 with side cutter, straight, alloyed carbon steel, forged and annealed, cutting edges induction hardened, for soft wire and hard wire, with 2 component plastic handle with hand protection, chromium-plated form gerade 0, gerade 0,253 2-component long chain nose pliers DIN 5745 with side cutter, 45 angled nose, alloyed carbon steel, forged and annealed, cutting edges induction hardened, for soft wire and hard wire, with 2 component plastic handle with hand protection, chromium-plated form ,25 Wire stripping pliers DIN 768 alloyed carbon steel C 45, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chrome plated mm² ,6-0 0,96 2-component water pump pliers DIN 8976 chrome vanadium steel, forged and annealed, curved jaws, gripping chuck hardened, self-locking nut, finger protection, with 2 component plastic handle with hand protection, chromium-plated ,368 2-component pliers set Contents: compination pliers 80 mm diagonal cutter 60 mm long chain nose pliers 200 mm wire stripping pliers 60 mm Art. no pieces,044 Zangensatz Contents: compination pliers 80 mm heavy duty diagonal cutter 80 mm long chain nose pliers 200 mm wire stripping pliers 60 mm Art. no pieces,082 Water pump pliers chrome vanadium steel, forged and annealed, curved jaws, gripping chuck hardened, chromium-plated, dipped, setting at touch of a button, safe engaging , , , convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

18 INFO ESD Electronic pliers Industrial quality Advantages: Elegant, ergonomically shaped, non-slip 2-component handle ensures comfortable and precise working Special tool steel, forged and tempered, edges hardened (58 ± 2HRC) Surface resistance 0.9 Ohm, in accordance with electronics area ESD Each mechanism checked precision pliers for meticulous assembly work for example in electronics and precision engineering for picking up, holding and bending model with electric discharging precision hinges smooth handle surfaces low-friction double spring for smooth and steady opening handles with two-coloured multi-component handle covers black/green special tool steel Not only people, objects also experience electrostatic charging as a result of movement, friction and being handled. Such charging can lead to the destruction of endangered components. HAUPA ESD - electronics pliers discharge such energy slowly and in a controlled way. ESD Electronic needle nose pliers with wire cutter, special tool steel 2-component ESD electronic pliers ESD Electronic needle nose pliers, 45 angle 45 angle, special tool steel ,08 ESD Electronic thin needle nose pliers straight construction, special tool steel ,083 ESD Electronic thin needle nose pliers, 45 angle 45 angle, special tool steel ,09 ESD Electronic needle nose pliers, 45 angle with wire cutter, special tool steel ,084 ESD Electronic thin needle nose pliers straight construction, special tool steel ,089 ESD Electronic needle nose pliers straight construction, special tool steel ,087 ESD Electronic thin needle nose pliers, 45 angle 45 angle, special tool steel , , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

19 2-component ESD electronic pliers ESD Electronic flat nose pliers Special tool steel ,090 ESD Electronic round nose pliers straight construction, special tool steel ,09 ESD Electronic side cutter normal construction, head width 4 mm, special tool steel ,078 ESD Electronic side cutters slim construction, head width 0 mm, special tool steel ,075 ESD Electronic side cutter without cutting-facet normal construction, head width 4 mm without chamfer, special tool steel ,075 ESD Electronic front cutter Special tool steel ,093 ESD Electronic combination pliers with wire cutter, special tool steel ,077 ESD Electronic pliers set Special tool steel Contents Art. No.: Art. no pieces 0, convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

20 2-component electronic pliers Microelectronic side cutters without cutting-facet, clearance angle: 50, with clip, for soft wires up to 0.8 mm² Special pliers Grip pliers one jaw straight, one jaw movable, forged of chrome vanadium, a real universal plier for gripping any kind of workpiece, flat round or square, with quick-release lever ,069 Microelectronic side cutters without cutting-facet, clearance angle: 2, with clip, for soft wires up to.3 mm² WS ,58 Grip pliers jaws drop, forged of chrome vanadium, adjustable, quick-release lever, half-round jaws, with wire cutter , ,087 Tweezers special design for wafers, long, extra small blades, needle fine top ends, stainless steel, antimagnetism acid resistent WS ,565 Pipe wrenches chrome vanadium steel, polished ,07 WS tube " 0, /2" 0, " 2,460 Riveting pliers made of aluminium-pressure casting, all inner parts made of special alloyed steel and hardened, with 4 exchangeable nozzles 2, mm, for blind rivets of aluminium-copper or steel ,552 Riveting tool set in portable plastic box. Contents: plier no , 00 pieces of alu space rivets 4 mm, short-middle-long, 2 twist drills and washers , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

21 Standard program Accessories...convincing solutions

22 Painters accessories Wire brushes Deep hole marker Marker and writing implement with a refillable solid lead, suitable for all surfaces (including dusty, rough, damp or oily surfaces) cap in a bright signalling colour with integrated sharpener. Also suitable for dark surfaces ,3 Water brushes real bristles, vulcanized, textile bound, bristles- 24 mm, length of bristle 48 mm Art. no ,29 Art. no. width ,036 Plaster cups soft rubber Carpenters pencils Art. no ,007 Marking chalk Art. no. depth height ,05 Plaster pan metal, with wood handle Art. no B blue 0, G yellow 0, R red 0,06 Art. no. depth height ,34 Paint scrapers steel, polished blade, with oval wooden handle Chalk in plastic bottles, 250 g width , , ,047 Chalk line roller Squid, 5 m Chalk line roller made from cast magnesium with push system: Pressure on the axle does not turn the crank; hardened hook with curved spike; integrated storage for the hook, 50023: fast-retraction transmission 5: Art. no red 0, blue 0, yellow 0,279 Chalk in bags Art. no BLAU blue 0, yellow 0, ROT red 0,060 Art. no. size m Squid 0, m Fast Squid 0, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

23 Cleaning wipes Industrial cleaning wipes HAUPA Industrial cleaning wipes are perfect for washing hands as well as cleaning tools and work surfaces. They remove stubborn dirt fast and efficiently such as grease, paint, oil, tar, ink, silicone, glue and much, much more making them the ideal companions for workshops, offices, home or for those on the go. These practical wipes have been impregnated with a solvent-free, industrial hand cleaner, which has been dermatologically tested and is also suitable for sensitive skin. The individually perforated wipes ensure easy extraction. The practical and solid storage container with lock-lid prevents the wipes from drying out. Contents: 40 wipes, each 7 x 25 cm. The must have for every cleaning job! Effortlessly removes: Grease Paint Oil Tar Ink Silicone Glue and more width ,90... convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

24 Soldering accessoires Soldering irons chrome nickel steel tube, with schuko safety plug, replaceable nickel-plated copper tips Soldering stone Volt Watt , , ,324 Soldering irons with plastic handle, with schuko safety plug, replaceable copper tips, nickelplated Art. no ,070 Soldering paste acc. to DIN 85-F-SW 26 rosin halide-activated, field of application: electro-technic, electronics, manufacture of electrical appliances Volt Watt ,264 Soldering irons soldering tip internally heated, chrome vanadium tube, with plastic handle, with schuko safety plug, replaceable nickel-plated copper tips, for electronic work Art. no ,073 Soldering fluid acc. to DIN 85-F-SW 32 rosin halide-activated, field of application: electro-technic, electronics, manufacture of electrical appliances Volt Watt ,257 Soldering set Contents: Electric soldering Iron 80 Watt Hobbyists solder m Radio solder m Soldering grease 20 g Art. no. Watt ,387 Art. no ,054 Grease for soft soldering acc. to DIN 85-F-SW 2 ammonium chloride, organic preparation, field of application: general soldering work Art. no , ,32 Soldering grease for fittings acc. to DIN 85-F-W 22 field of application: sanitary technics, copper tubes etc. Solder in triangular sticks DIN 707 length approx. 430 mm, approx. 250 g per stick, size: x x x 430 mm Art. no. Sn% Roll/g , , ,232 Art. no ,080 Soldering fluid acc. to DIN 85-F-W 2 ammonium chloride, organic preparation, field of application: sanitary technics, copper tubes etc. Art. no , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

25 Solder for electronic work Solder for electronic work acc. to DIN EN antimony-free, soldering flux acc. To DIN EN 29454,..2.B (F-SW 26), S-Sn60Pb40, rosin halide-activated Art. no. Sn% Roll/g , , , , ,5 60 m 0, , , , , , , , , , , ,529 Solder for electronic work acc. to DIN EN antimony-free, soldering flux acc. to DIN EN 29454,..2.B (F-SW 26), S-Sn60Pb40, rosin halide-activated Art. no. Sn% Roll/g m 0, , , , , , , , , , , , ,024 Solder for electronic work acc. to DIN EN antimony-free, soldering flux acc. To DIN EN 29454,..2.B (F-SW 26), S-Pb60Sn40, rosin halide-activated Art. no. Sn% Roll/g , ,257 Fittings solder acc. to DIN EN low antimony content, soldering flux acc. to DIN EN 29454, 2..3.B (F-SW 24), S-Pb60Sn40, ammonium chloride based, organically prepared Art. no. Sn% Roll/g 60070,5 40 m 0, , ,258 Fittings solder acc. to DIN 29453, solid S-Pb50Sn50 low antimony content Art. no. Sn% Roll/g , , convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

26 Solder lead-free (RoHS-directive) Solder wire according to DIN EN lead-free special alloy, 2.5% flux percentage according to DIN EN 29454,..2.B (EN-690-ROLO),.00 mm of, 0,00 spools S-Sn99Cu, DIN EN (Sn99, 3Cu0,7 - eutectic) Steel stamps Steel stamp, figures (0-9) DIN 45 Art. no. Sn% Roll/g , , , , , , , , , , , , , , ,527 Art. no. size set , , , , , ,800 Steel stamp, letters (A - Z), DIN 45 Solder wire according to Din EN lead-free special alloy, 3.5% flux percentage according to DIN EN 29454,..3.B (EN-690-ROLO),.00 mm of, 0, 00 spools S-Sn99Cu, DIN EN (Sn99, 3Cu0,7 - eutectic) Art. no. size set A-Z 0, A-Z 0, A-Z 0, A-Z, A-Z, A-Z 2,479 Art. no. Sn% Roll/g , , , , , ,4 6044, , , , , , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

27 Standard program Chisels, Hammers...convincing solutions

28 Chisels, centre punches, hatchets, hammers Flat chisels to DIN 6453 A, flat oval shank chrome vanadium air hardenend steel, golden varnishes Hammers Firmer chisels DIN 539 with bevelled edges and polished wood handle and cutting edge protector Art. no. CW TL mat/s mat/s , , ,606 Stone chisels, flat oval shank chrome vanadium air hardenend steel, golden varnishes Art. no. CW TL mat/s mat/s , ,584 Stone chisels, octagonal shank chrome vanadium air hardenend steel, golden varnishes Art. no. CW BL TL , , , , ,93 Rubber hand guard total length 40 mm, max. 90 mm, for chisels flat oval shank Art. no. size mat/s mat/s ,25 Art. no. CW TL mat/s mat/s , ,595 Pin punch set golden varnishes, in folding metal case Jointing chisel chrome vanadium air hardenend steel, golden varnishes, for light works, the wide and flat cutting edge allows a quick working and avoid a breaking out of the wall Art. no. CW TL mat/s mat/s ,302 Stone chisels, octagonal shank chrome vanadium air hardenend steel, golden varnishes Art. no mm 0,502 Household hatchet varnished and polished cutting edge, DIN 53 Art. no. CW TL mat/s mat/s , ,573 Electricians chisels chrome vanadium air hardenend steel, golden varnishes Art. no ,600 Art. no. CW TL mat/s mat/s , , ,2 Centre punch to DIN 7250 octagonal shank, chrome vanadium air hardenend steel, golden varnishes Claw hammer American model, 6 Oz, wood handle Art. no. size , , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

29 Hammers and handles Claw hammer American model, 6 Oz, fibre glass handle Art. no. size ,748 Engineers hammer DIN 04 with polished hickory handle, with steel handle protection Art. no. HW , , , ,622 Engineers hammer DIN 04 with steel pipe handle and rubber grip Art. no. HW , ,740 Engineers hammer DIN 04 with red ultramid handle, low vibration Art. no. HW ,40 Engineers hammer english pattern, ball pin Art. no. HW , ,485 Double faced sledges to DIN 6475 with steel pipe handle and rubber grip Art. no. HW , ,504 Siedge hammer to DIN 6475 with polished hickory handle, with steel handle protection Art. no. HW , ,375 Plastic hammer with replaceable cellidor striking faces and ash handle Art. no , replacement heads 0,460 Hammer handles to DIN 5 B ash wood, black varnishes Art. no , , ,03 Sledge handles to DIN 535 A ash wood, black varnishes Art. no , ,5... convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

30 Files Warding files DIN 7283 Set: 6 files with wooden handle, section A, B, C, D, E, F in plastic wallet ,08 Contact files Set: 6 files in plastic wallet ,078 Files assortment Set: 5 files in plastic wallet, files with plastichandle round square flat half round triangular bastard cut 0, smooth cut 3 0, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

31 Standard program Knives...convincing solutions

32 Cable knives Cable stripping or lead tube knives with wooden handle Cable stripping knives with wooden scales, blade, reamer and screwdriver Art. no. BL ,047 Cable stripping knives solid handle, shock-proof synthetic, blade with straight and rounded scraper Art. no. BL type ,089 Cable stripping knives with plastic scales, 2 blades, reamer and screwdriver Art. no. BL type ,073 Cable stripping knives with black plastic scales, stainless blade with scraper Art. no. BL type ,092 Utility knives manufactured from zinc di-cast, with 4 straight blades and hook blade Art. no. BL type ,082 Cable stripping knives with wooden scales, blade with scraper Art. no. BL TL , hook blade 0, straight blade 0,005 Utility metal knives Cutting of plastic, wallpaper, cardboards, leather, plywood, carpets, with automatic blades locking, reserve blade in the handle Art. no. BL type ,079 Art. no. BL , /KL spare blades 0,050 Cable stripping knives with wooden scales, blade and reamer Utility metal knives Cutting of plastic, wallpaper, cardboards, leather, plywood, carpets, with automatic blades locking, reserve blade in the handle Art. no. BL type ,078 Art. no. BL , spare blades 0, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

33 Saws, saw blades Utility knives EXTRA with spare blades Cutting of plastic, wallpaper, cardboards, leather, plywood, carpets, with automatic blades locking, reserve blade in the handle Art. no. BL ,022 Tin snips, tube cutters, saws Hole-cutting tin snips with polished blade, carbon steel, figure cuts (large radii) ,523 Figure tin snips with polished blade, carbon steel, right-hand cutting, for short straight and figure cutting (small radii) ,53 Small tube cutter with cutting wheel and dual roller guides /8-5/8 Art. no , loose spare wheels 0,025 Tube cutter with cutting wheel and dual roller guides, retractable burr remover, /8-3/8 Art. no , loose spare wheels 0,006 Junior hacksaw strong frame, nickel-plated Art. no. type Sbl metal 50 0,49 Junior hacksaw DIN 6473 C h hacksaws blade for metal Art. no. type Sbl metal 50 0,069 Junior hacksaw heavy type, with pistol type handle and hacksaw blade for metal, form A Art. no. type Sbl metal 50 0,64 Hand saw PUK with hacksaws blade for metal, with fixed, varnished wooden handle Art. no. type Sbl metal 50 0,00 Hand saw PUK with adjustable, varnished wooden handle, in plastic bag Art. no. type Sbl metal 50 0,9 Hacksaw PUK acc. to DIN 6494C, for Art. No , , , , , Art. no. type Sbl wood 50 0, universal 50 0, convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

34 Saws, saw blades Hacksaw frame steel pipe with flat oval section, bright chrome-plated, tension bolt made from steel, form A LED lamps/torches Mini torch High-performance mini LED torch, great illumination performance despite the minimalist dimensions. Includes x AAA battery, wrist strap and nylon bag with belt loop, in blister packaging Art. no. type Sbl metal 300 0,408 Hacksaw blades to DIN 6494 type A, single sided blade HSS-Bi-metal x 9 0,080 Focus torch High-performance LED torch with adjustable focus ensuring the ideal cone of light at all times. Includes 3 x AAA batteries, storage in a nylon bag with belt loop, in blister packaging Art. no. type Sbl metal 300 0, x 04 0,200 Battery-powered torch High-performance LED torch, with an extreme illumination range. Includes rechargeable battery with high performance (2600 mah) and charger, nylon bag with belt loop, in blister packaging Battery charger x 5 0,440 Rotating head lamp High-performance LED head lamp, ideal combination of weight and illumination performance, head can be rotated through 90 degrees. Includes 3 x AAA batteries, nylon bag with belt loop, in blister packaging HAUPA high-performance LED lamps/torches for daily work use Extremely high illumination performance with minimum battery load thanks to highly modern CREE LED bulbs x 55 x 62 0,80 22 TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

35 Standard program Tool cases...convincing solutions

36 Assortment boxes, wallets Assortment box (Polypropylene) Features: Ideal for small parts the lighter and reliable alternative to sheet steel bulk storage chests. Equipped with removable boxes thus allowing individual division. U-profiles in the cover and grids in the bottom of the box prevent unwanted slipping and allow stacking of several bulk storage chests. Dimensions: W = 420 x D = 350 x H = 60 mm, colour: black/red. Material: Bulk storage chest from polypropylene with transparent cover, rounded edges, ergonomic carrying handle and rigid snap closures. Leather tool cases Tool case Tradition and Fan made of black leather, with 2 inside loops and 2 snap-locks : Tradition : Fan Art. no. width depth height , ,669 Art. no. width depth height ,200 Tool case Achat made of black leather, all outside edges reinforced with Alu-squares, with galvanized floor-onsert of sheet-metal collapsable front, snap-fasteners riveted on side, side-loops for carrying-belts, 2 snap-locks, all 4 inside with toolcompartments and adjustable loops, without carrying belts Tool wallets of black linen, with leather strap fastening Art. no. width depth height ,3 Tool case Favorit - Admiral - Profi made of black leather, with galvanized floor-onsert of sheet-metal collapsable front, with locks, side-, front-, rear-parts as well as bottom and cover reinforced, inside with tool-compartments and adjustable loops, without carrying belts. Art. no. width depth , : Favorit : Admiral : Profi Art. no. width depth height , , ,378 Tool case Comet made of black leather, all outside edges reinforced with Alu-squares, with galvanized floor-onsert of sheetmetal collapsable front, snap-fasteners riveted on side, side-loops for carrying-belts, 2 snap-locks, all 4 inside with tool-compartments and adjustable loops, without carrying belts Art. no. width depth height , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

37 Leather tool cases Tool case Start Tool case for apprentices, made from black cow hide equipped with 20 tools. Case Contents: 2C telephone pliers, 200 mm 2C combination pliers, 80 mm 2C side cutters, 60 mm 2C wire stripping pliers, 60 mm 2C-VDE electrician s screwdrivers, 2.5 x 75, 4 x 00, 5.5 x 25, 6.5 x 50 mm 2C-VDE cross slotted screwdrivers PH, size and 2 Cable knife, -piece PUK pocket saw, fixed handle Brush Electricians chisel, 0 x 250 mm VDE/GS Voltage tester - blade 50 mm Stone chisel, 300 mm Engineers hammer, 300 g Double-face sledge hammer, 000 g Spatula, 40 mm Plaster container Art. no. empty pieces 6,00 Tool case Alpha Tool case made from black neat s leather, equipped with 9 tools. Case Contents: 2C combination pliers, 80 mm 2C side cutters, 60 mm 2C telephone pliers, 200 mm 2C-VDE electrician s screwdrivers, 2.5 x 75, 4 x 00, 5.5 x 25, 6.5 x 50 mm 2C-VDE cross slotted screwdrivers PH, size and 2 Voltage tester VDE/GS Wire stripping pliers, mm² Cable stripper hooked blade, 8-28 mm Cable knife, -pieces PUK pocket saw, fixed handle Electricians chisel, 0 x 250 mm Stone chisel, 250 mm Engineers hammer, 300 g Measuring Tape, 3 m Cabinet Level, 250 m Art. no. empty pieces 5,200 Tool case Saphir Tool case for electrical contractor, made of green neat s leather, with 3 tools. Case Contents: 2C long-nosed round pliers, 60 mm 2C telephone pliers, 200 mm 2C combination pliers, 80 mm 2C side cutters, 60 mm 2C wire stripping pliers, 60 mm 2C water pump pliers, 240 mm ESD elektronic side cutters, 5 mm 2CE electrician s screwdrivers 2.5 x 75, 4 x 00, 4 x 25, 5 x 50 m 2C engineers screwdrivers 6 x 00, 7 x 25, 8 x 50 mm 2C cross slotted screwdrivers PH, size and 2 2C cross slotted screwdrivers PZ, size and 2 Electronic screwdriverset, 7-pieces Socket wrenches SW 5.5, 3, 7 Allen key set, 8-pieces Cable stripper hooked blade, 8-28 mm Combination snips 90 mm PUK pocket saw, fixed handle Bench hammer 400 g Folding rules 2 m Cable cutter max. 6.9 mm Cable stripping knife plastic scales Voltage tester VDE/GS Art. no. empty pieces 8,50 Tool case Novelle Tool case for electrical contractor, made of black neat s, leather, with 26 tools. Case Contents: 2C combination pliers, 80 mm 2C side cutters, 60 mm 2C heavy duty side cutters, 80 mm 2C telephone pliers, 200 mm 2C telephone pliers, 200 mm, bent 2C water pump pliers, 240 mm 2C wire stripping pliers, 60 mm 2C electrician s screwdrivers, 75, 25, 50 mm 2C engineers screwdrivers, 00, 50 mm 2C cross slotted screwdrivers PH, size and 2 2C cross slotted screwdrivers PZ, size and 2 Cable stripper hooked blade, 8-28 mm Reamer square Cable stripper Painter scrapers Bench hammer 300 g Cable stripping knife plastic scales Combination snips 40 mm PUK pocket saw, adjustable handle Voltage tester Basic Voltage tester VDE/GS Art. no. empty 22052/ pieces 6, convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

38 Leather tool cases Tool case Phoenix Tool case for electrical contractor, made of black neat s leather, with 39 tools. Case Contents: 2C long flat nose pliers, 60 mm 2C telephone pliers, 200 mm 2C combination pliers, 80 mm 2C side cutters, 60 mm 2C wire stripping pliers, 60 mm 2C water pump pliers, 240 mm ESD electronic side cutters, 5 mm ESD electronic needle nose pliers, 30 mm Crimping pliers multi insulated and non-insulated crimping terminals 2C engineers screwdrivers 00, 25, 50 mm 2C electrician s screwdrivers 2.5 x 75, 4 x 25, 5 x 50, 5 x 75 mm 2C cross slotted screwdrivers PH, size 0, and 2 2C cross slotted screwdrivers PZ, size and 2 Electronic screwdriverset, 7-pieces 2C socket wrenches, 5.5, 2, 7 Reamer, round Allen key set, 8-pieces Adjustable wrench, 340 mm Cable stripper hooked blade, 8-28 mm Combination snips, 90 mm PUK pocket saw, fixed handle Electrician s chisel, 0 x 250 mm Folding rules, 2 m Light metal spirit level, 400 mm Bench hammer, 300 g Cable cutter, max. 6.9 mm Cutter knife, plastic Cable stripping knife, plastic scales VDE/GS voltage tester V Backpacks, Nylonbags Backpack Tool backpack not only for the trainee, base shell rubber reinforced, double cross seam for high load. Material: extra strong 600D polyester, watertight and dirtrepellent, colour: black/green. Art. no. width depth height ,880 Backpack Basic Tool backpack not only for the trainee, base shell rubber reinforced, double cross seam for high load. Contents: 2C-Combination pliers 80 mm 2C-Side cutters 60 mm 2C-Telephone pliers 60 mm 2C-Wire stripping pliers 60 mm 2C-VDE electricians screwdriver set, 6 pcs. Voltage tester V Water brush Plaster cup Paint scraper, 40 mm Carpenters pencil Stone chisel, 32x300 mm Electricians chisel, 0x250 mm Engineers hammer, 300 g Sledge hammer, 000 g Cable knife, blade PUK pocket saw, fixed handle Wire stripper, hooked blade, 8-28 mm Art. no. empty pieces 9,900 Brass pad locks body made from a solid brass block, hardenend steel shackle, with 2 keys Art. no. empty pieces 6,660 HAUPA Tool belt Tool Pouch 7 pockets to keep your tools handy with hammerloop and tapeholder belt loop with strong snap-button for easy attachment to belt. Material: extra strong 600D polyester Art. no. size , ,35 Carrying belts with 2 spring hooks Art. no ,4 Art. no. width depth height ,02 HAUPA Tool bag Tool Pouch 7 pockets to keep your tools handy with hammerloop and tapeholder belt loop with strong snap-button for easy attachment to belt. Material: extra strong 600D polyester. Contents: 2C combination pliers 2C electricians screwdriver 2C cross slotted screwdriver PH Cable stripper, manual VDE/GS voltage tester Art. no. empty pieces 0, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

39 Nylonbags HAUPA Belt bag Tool belt 8 compartments for your tools, reinforced main compartment, steel rivets for high reliable quality. Big front compartment for nails or measurement tape, hammer sleeve, fits up to 35 cm hips, material: extra strong 600D polyester, colour: green, black Art. no. width depth height ,326 HAUPA Tool belt Standard 8 compartments for your tools, reinforced main compartment, steel rivets for high reliable quality. Big front compartment for nails or measurement tape, hammer sleeve, fits up to 35 cm hips. Material: extra strong 600D polyester, colour: green, black Contents: 2C combination pliers 200 mm 2C side cutters 60 mm 2C electrician s screwdriver 2C cross slotted screwdrivers PH, size and 2 Engineers hammer, 300 g Cable stripping knife, -piece Measuring tape, 3 m Art. no. empty pieces 2,222 Tool cases Tool bag Tool bag with inner and outer tool compartments, rubber-reinforced base. Waterproof and dirt resistant, rubber-reinforced base, double cross-seam for heavy loads, removable shoulder strap, adjustable, 0 compartments outside (various sizes), 0 compartments inside (various sizes), belt for spirit level (outside), material: extra strong 600D polyester, colour: green, black Art. no. width depth height ,507 HAUPA Tool bag Tool bag with inner and outer tool compartments, rubber-reinforced base. Comes complete with 22 tools. Features: Waterproof and dirt resistant, rubber-reinforced base, double cross-seam for heavy loads, removable shoulder strap, adjustable, 0 compartments inside/outside (various sizes), belt for spirit level (outside), material: extra strong 600D polyester, colour: green, black. Tool bag Contents: 2C-VDE electrician s screwdrivers, 2.5 x 75, 4 x 00, 5.5 x 25, 6.5 x 50 mm 2-VDE cross slotted screwdrivers PH, size + 2 2C combination pliers, 200 mm 2C side cutters, 60 mm 2C telephone pliers, straight 2C wire stripping pliers, 60 mm Voltage tester Water brush Paint scraper, 40 mm Electrician s chisel, 0 x 250 mm Stone chisel, 300 mm Engineers hammer, 300 g Sledge hammer, 000 g Plaster container Wire stripper, hooked blade, 8-28 mm Cable knife, blade PUK pocket saw, fixed handle Carpenter s pencil Art. no. empty pieces 6,350 HAUPA Big Box very big box look alike Tool bag, easy approach to the tools, inside and outside compartments for tools, reinforced handles, material: extra strong 600D polyester, colour: green, black Art. no. width depth height , convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

40 Nylonbags HAUPA Trend Box Plus Tool bag for professional use. With inside and outside pockets, easy access to the tools, inside and outside compartments for tools, reinforced handles, material: extra strong 600D polyester, colour: green, black. Big box Contents: 2C-VDE electrician s screwdrivers, 2.5 x 75, 4 x 00, 5.5 x 25, 6.5 x 50 mm 2-VDE cross slotted screwdrivers PH, size + 2 2C combination pliers, 80 mm 2C telephone pliers, 200 mm 2C side cutters, 60 mm 2C water pump pliers, 240 mm 2C wire stripping pliers, 60 mm Bit-Box, 7-pieces Voltage tester Basic Allen keys set, 7-pieces Adjustable single-head wrench Chalk - blue Impact cord roller Carpenters pencil Engineers hammer 300 g Cable stripping knive Junior hacksaw, heavy 50 mm Cable cutters 60 mm insulatet Combi-Drillbox Spanners for switch-cabinets Folding rule, fibre glass, 2 m HAUPA Trend Box Tool bag for professional use. With inside and outside pockets, including 20 tools, easy approach to the tools, inside and outside compartments for tools, reinforced handles, material: extra strong 600D polyester, colour: green, black. Contents: 2C combination pliers, 200 mm 2C side cutters, 60 mm 2C telephon pliers, straight, 200 mm 2C water pump pliers, 240 mm VDE screwdrivers set, 6 electricians screwdrivers Cable ties, 292 x 3,6 mm Cabinet spirit level Filling knife, 40 mm Electrician s chisel, 0 x 250 mm Voltage tester, VDE/GS Fitter s hammer, 300 g Universal stripper Measuring tape, 3 m PUK pocket saw, fixed handle Carpenters pencil Art. no. empty pieces 5,540 Art. no. empty pieces 6, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

41 Belts and jackets Jackets Tool belts 0 compartments to organize your tools, hammer sleeve and tapeholder belt loop for easy attachment to belt, materials: extra strong 600D polyester, colour: black/green Art. no. width height empty 0,350 Tool belt Basic 0 compartments to organize your tools, hammer sleeve and tapeholder belt loop for easy attachment to belt, materials: extra strong 600D polyester, colour: black/green. Contents: 2C-VDE-Electricians screwdriver 5,5x25 mm 2C-VDE-Electricians screwdriver 3x00 mm 2C-VDE-Cross slotted screwdrivers PH 2 Measuring tape 3 m 2C-Combination pliers 80 mm 2C-Side cutters 60 mm VDE/GS Voltage tester V Utility metal knive Wire stripper, hooked blade, 8-28 mm Cable cutter with stripping function Art. no. empty pieces 2,20 HAUPA Tool Jacket Tool jacket for quick access to your tools. Quick assembly with strong zip, inside and outside pockets, particularly suitable for use in hot temperatures. Colour: green, black, width 500 mm, height 580 mm. Non-slip shoulder belt, breathable inside net, 2 document holders at back, 5 screwdriver pockets (with rubber adjustment), pen pocket, mobile phone pocket (Velcro ), shear pocket (with rubber adjustment), 2 pliers pockets (pushbutton fastener), voltage detector pocket (Velcro ), pocket for small parts (Velcro ), hammer loop. Art. no. width height empty 0,764 HAUPA Tool Jacket Tool jacket for quick access to your tools. Tool jacket for fitters including 0 tools. Quick assembly with strong zip, inside and outside pockets, particularly suitable for use in hot temperatures. Colour: green, black, width 500 mm, height 580 mm. Non-slip shoulder belt, breathable inside net, 2 document holders at back, 5 screwdriver pockets (with rubber adjustment), pen pocket, mobile phone pocket (Velcro ), shear pocket (with rubber adjustment), 2 pliers pockets (pushbutton fastener), voltage detector pocket (Velcro ), pocket for small parts (Velcro ), hammer loop. Contents: 2C-VDE electrician s screwdriver with PZ/FL profile 2C-VDE electrician s screwdrivers, 75, 0, 25 mm 2C cross slotted screwdriver, PH, 80 mm 2C electrician s scissors Combination pliers VDE Diagonal cuttter VDE Voltage tester Basic Engineer s hammer 300 g Art. no. empty pieces 2, convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

42 Hard-top tool cases Tool case Start up empty Hard-top case, black, 2 tool kits, document pocket with hook-and-loop fixing, combination lock, bottom half of case equipped with variable partitions, shoulder strap Network service case HAUPA Hard-top case, black, for electricians and network technicians, 2 tool kits (one with document pocket), bottom half of case contains 8 small removable boxes, secured for transport purposes Art. no. width depth height ,740 Tool case Aktion 2 tool kits (one with document pocket). Ground bowl with variables to dividing bars Art. no. width depth height ,66 Tool case trolly rigid case, made of ABS-plastic material, black, integrated rolls and pull-out handle in the bottom, locks of alu-press-casting, empty. Inside: separation for documents, plate for tools, cover-plate with pocket compartments and clip-compartment, bottom-tray Art. no. width depth height ,580 Tool case Omega rigid case, black, 28 compartments, combination lock, separation for documents, 2 plate for tools, 2 lockable locks, ground bowl with variables to dividing bars, running around push border Art. no. width depth height ,740 Art. no. width depth height ,039 Tool case trolly Fly hard-side case, black, 3 tool sections, 2 locks, document pocket, with high-grade fittings, bottom half of case equipped with variable partitions Tool case Merkur rigid case, made of ABS-plastic material, black, empty, excellent rib-profile on the outside, high-quality locks, inside with separation for documents, 2 plates with compartments for several tools, tray of ABS-plastics with separations for individual divisions Art. no. width depth height ,320 Art. no. width depth height , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

43 Hard-top tool cases Tool case Basic Hard-top case, black, 2 tool kits (one with document pocket), bottom half of case equipped with variable partitions, 9 tools. Case (460 x 60 x 30 mm). Contents: 2C-VDE electrician s screwdrivers, 2.5 x 75, 4 x 00, 5.5 x 25, 6.5 x 50 mm 2-VDE cross slotted screwdrivers PH, size and 2 2C combination pliers, 80 mm 2C side cutters, 60 mm 2C telephone pliers, straight, 200 mm 2C wire stripping pliers, 60 mm Wire stripper, hooked blade, 8-28 mm Cable knife, -pieces Engineers hammer, 300 g PUK pocket saw, fixed handle Electricians chisel, 0 x 250 mm Voltage tester blade, 50 mm Measuring stick, 2 m Paint scraper, 40 mm Water brushes Art. no. empty pieces 6,600 Tool case Start-up Hard-top case, black, 2 tool kits, document pocket with hook-and-loop fixing, combination lock, bottom half of case equipped with variable partitions, shoulder strap, 9 tools. Contents: 2C-VDE electrician s screwdrivers 2.5 x 75, 4 x 00, 5.5 x 25 und 6.5 x 50 mm 2C-VDE cross slotted screwdrivers, PH, size + 2 2C combination pliers, 85 mm 2C side cutters, 65 mm 2C telephone pliers, 200 mm 2C wire stripping pliers, 60 mm Wire stripper, hooked blade, 8-28 mm Cable knife, -pieces Engineers hammer, 300 g PUK pocket saw, fixed handle Electricians chisel, 0 x 250 mm Paint scraper, 40 mm Voltage tester, blade 50 mm Measuring tape, 3 m Water brush Art. no. empty pieces 9,80 Network-Servicecase Hard-top case, black, for electricians and network technicians, 2 tool kits (one with document pocket), bottom half of case contains 8 small removable boxes, secured for transport purposes. Case (2 pieces). Contents: 2C side cutters, 60 mm 2C telephone pliers, 80 mm 2C telephone pliers, 200 mm, bent 2C electrician screwdrivers 75, 00, 50 mm 2C cross slotted screwdrivers PH, size 0,, 2 Electronic screwdriver set, 7-pieces Control cabinet key Precision stripper PWS-Plus Combination snips 90 mm PUK pocket saw, fixed handle Crimping pliers for coaxial connectors ESD electronic side cutters, 30 mm Stripper for coaxial cable VDE/GS voltage tester Stripper for UTP/STP data cable Crimping pliers for modular plugs Sensor tool Art. no. empty pieces 8,800 Network service case Connect The perfect Starter package for data and network. Hart-top case, black, 2 tool kits, bottom half of case contains removeable boxes, 3 tools. Case Contents: 2C electrician screwdrivers 2.5 x 75, 3 x 00, 4 x 25 mm 2C cross slotted screwdrivers PH, size and 2 Electronic screwdriverset, 7-pieces Stripper for UTP/STP data cable 2C side cutters 60 mm 2C telephone pliers, bent, 200 mm ESD electronic side cutters, 5 mm Sensor tool Crimping pliers for modular plugs 2C soft-grip scissors, 40 mm Art. no. empty pieces 5, convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

44 Hard-top tool cases Tool case Akkurat Master s case for radio and television, with 32 tools, rigid case. Case Contents: 2C combination pliers, 60 mm 2C side cutters, 60 mm 2C telephone pliers, straight, 200 mm 2C telephone pliers, bent, 200 mm 2C wire stripping pliers, 60 mm ESD electronic side cutters, 5 mm ESD electronic needle nose pliers, 30 mm ESD Electronic round nose pliers, 30 mm ESD electronic needle nose pliers, 30 mm, 45 Engineers screwdrivers, 8 x 50 mm 2C cross slotted screwdrivers, PH, size and 2 2C electrician s screwdrivers 2.5 x 75, 4 x 00, 4 x 25, 5 x 50 2C electrician s screwdrivers 2.5 x 75 (bare) Elektronic screwdriver set, 7-pieces Tweezer, straight, 30 mm Tweezer, flat, 45 mm 2C socket wrenches 5, 5.5, 6 2C piercing awl, round Voltage tester Volt Checking mirror 20 mm Claw holder, size 525 Spanner, 75 mm Solder, Sn 60% mm 00 g Contact file set. 6 pieces Universal scissors, 90 mm Crown scissors, 5 mm Tool case Diamant Master s case for domestic appliances, with 23 tools, rigid case, black. Case Contents: 2C cross slotted screwdrivers, PH, size and 2 2C electrician s screwdrivers 4 x 00, 5 x 50 mm 2C engineers screwdrivers 6 x 00, 8 x 50 mm 2C long nose round pliers, 60 mm 2C long nose flat pliers, 60 mm 2C telephone pliers 200 mm 2C telephone pliers, bent, 200 mm 2C combination pliers 60 mm 2C side cutters, 60 mm 2C heavy duty side cutters, 200 mm Cable stripper ESD electronic side cutters, 5 mm Crimping pliers for crimping terminals Socket wrench set, /4, 33 pieces PUK pocket saw, fixed handle Bench hammer, 300 g Cable stripping knife, plastic scales VDE/GS Voltage tester Combination snips, 90 mm Cable cutter, max. 6.9 Art. no. empty pieces 8,80 Art. no. empty pieces 8,500 Tool case Inspektor rigid case, black, with high-grade fittings, Master s case with 25 tools. Case Contents: 2C combination pliers, 80 mm 2C heavy duty side cutters, 80 mm 2C telephone pliers, 200 mm 2C telephone pliers, bent 200 mm 2C water pump pliers, 240 mm 2C wire stripping pliers, 60 mm 2C electrician s screwdrivers 75, 25, 50 mm 2C engineers screwdrivers 00, 50 mm 2C cross slotted screwdrivers PH, size + 2 2C piercing awl Wire stripper, hooked blade, 8-28 mm Voltage tester, V Adjustable wrench, 20 mm Paint scraper, 50 mm Electricians Chisel, 0 x 250 mm Engineers hammer, 300 g Cable knife, blade Universal scissors, 90 mm PUK pocket saw, fixed handle Measuring stick, 2 m Alu level 400 mm Tool case 2 component Hard-top case, for apprentices, black, 2 tool kits, one with document pocket, cover-plate with pocket compartments and clip-compartment, 8 tools. Case (460 x 60 x 30 mm). Contents: 2C telephone pliers, straight, 200 mm 2C combination pliers, 80 mm 2C heavy duty side cutters, 80 mm 2C wire stripping pliers, 60 mm 2C electrician s screwdrivers 2.5 x 75, 3 x 00, 5.5 x 25, 6.5 x 50 mm 2C cross slotted screwdrivers, PH, size and 2 Cable knife, -pieces Wire stripper, hooked blade, 8-28 mm PUK pocket saw, fixed handle Paint scraper, 40 mm Electricians chisel, 0 x 250 mm Voltage tester, volt Engineers hammer, 300 g Measuring stick, 2 m Art. no. empty pieces 8,980 Art. no. empty pieces TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

45 Hard-top tool cases Tool case Merkur Plus rigid case, black, Master s case with 25 tools. Case Contents: 2C electrician s screwdrivers 75, 25, 50 mm 2C engineers screwdrivers 00, 50 mm 2C cross slotted screwdrivers, PH, size and 2 Universal scissor, 90 mm Cable knife, -piece Wire stripper, hooked blade, 8-28 mm 2C combination pliers, 80 mm 2C heavy duty side cutters, 80 mm 2C telephone pliers, 200 mm 2C telephone pliers, bent, 200 mm 2C water pump pliers, 240 mm 2C wire stripping pliers, 60 mm PUK pocket saw, fixed handle Electricians chisel 0 x 250 mm Measuring stick, 2 m Alu level, 400 mm 2C piercing awl Voltage tester V Adjustable wrench, 20 mm Engineers hammer, 300 g Paint scraper, 50 mm Art. no. empty pieces 9,980 Tool case Panther inside: separation for documents, 2 plate for tools, cover-plate with pocket compartments and clip-compartment. Case Contents: 2C electrician s screwdrivers, 75, 00, 25, 50 mm 2C engineers screwdriver, 00 mm 2C cross slotted screwdrivers, PZ, size and 2 Wire stripper, hooked blade, 8-28 mm Control cabinet key Jointing chisel, 26 x 250 mm Electrician s chisel, 0 x 250 mm Cable stripping knife, plastic shank Universal saw, heavy 50 mm 2C combination pliers, 80 mm 2C heavy duty side cutters, 80 mm 2C telephone pliers, 200 mm 2C wire stripping pliers, 60 mm Cabinet level, 250 mm Bench hammer, 300 g Voltage tester Basic VDE/GS voltage tester Art. no. empty pieces 7,460 Tool case Compact Hard-top case, black, 2 tool kits (one with document pocket), bottom half of case equipped with variable partitions, case Contents: 2C electrician s screwdrivers, 2,5 x 75, 4 x 00, 4 x 25, 5 x 50 mm 2C cross slotted screwdrivers, PH, size and 2 Electronic screwdriver set, 7-pieces 2C combination pliers, 80 mm 2C side cutters, 60 mm 2C telephone pliers, 200 mm Wire stripper, hooked blade, 8-28 mm Cable stripping knive, 4-6 mm Automatic wire stripper, 0,2-6 mm² Cable cutter with a snap 2K Soft-Grip scissor, 40 mm PUK pocket saw, fixed handle HAUPA Bit box, 7-pieces SDS-plus set, 5-pieces Spirit level, 400 mm Measuring tape, 3 m Voltage tester Basic Art. no. empty pieces 7,80 The ideal tool assortment rigid case, black, with high-grade fittings, with 32 tools. Case Contents: 2C combination pliers, 80 mm 2C telephone pliers, 200 mm 2C side cutters, 60 mm 2C telephone pliers, 200 mm 2C water pump pliers, 240 mm ESD electronic side cutters, 5 mm ESD electronic needle nose pliers, 30 mm 2C electrician screwdrivers 75, 75, 25, 50 mm 2C engineers screwdrivers 00, 50 mm 2C cross slotted screwdrivers PH, size + 2 Electronic screwdriver set, 7-pieces Solder for electronic work, Sn 60%,.5 mm, 00 g Claw retriever with fixed shaft, size 65 2C piercing awl, square 2C socket wrenches 7, 8, 0 Checking mirror, 20 mm Socket wrench set, /4, 33 piece Contact soldering iron, 30 watt Cable stripping knife, plastic handle Bench hammer, 300 g Universal saw, heavy 50 mm Cable stripper, mm Tweezer angled Combination snips, 90 mm VDE/GS Voltage tester Art. no. empty pieces 0, convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

46

47 Standard program Drilling tools...convincing solutions

48 Twist drills Twist drills DIN 338/HSS type N point angle 8, spiral angle 25-35, -tolerance h 8, of HSS, for drilling of steel, steel-casting alloyed and unalloyed up to approx. 900 N/mm² strength grey- and tempered casting, sinter iron, newsilver, graphit, alu-alloy, bronze and brass Packaging unit in blister pack: 0,5-3,0 mm; SPU = 3 pieces 3,2-6,0 mm; SPU = 2 pieces 6,5-3,0 mm; SPU = piece Art. no. core-hole SL TL PU /CO , /CO M /CO , /CO /CO Art. no. core-hole SL TL PU , /CO , /CO ,6 M /CO /CO ,5 M /CO /CO , /CO ,3 M /CO , /CO /CO ,2 M /CO , /CO M /CO , /CO M /CO , /CO ,8 M /CO /CO /CO ,5 M /CO /CO , /CO /CO ,2 M /CO , /CO Twist drills DIN 338/HSS type N made from hight power steel, in plastic pocket Art. no pieces 0, /R - 0 0, /TIN - 0 0, pieces, /R - 3, /TIN - 3,290 Bulk storage chest for twist drills HSS, DIN 338, 70 pieces, TYP N, short, ground, bright, with split point, TIN coated. Contents: mm (upstairs in 0.5 mm steps) up to 8,0 mm 0 pieces/size > 8,5 mm 5 pieces/size Art. no /TIN 70-pieces 4, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

49 Drills Drills Auger bit, type Lewis , , , , , , , , , , , ,005 Drill type machine bits for wood made from carbon steel, concentrically ground, with centre point and front cutter , , , , , , , , ,088 Flat bits with flat cutter head, square shank, DIN 6447 A shank , , , , , , ,045 Casing drill With cylindrical clamping shaft, cutting element made of chrome vanadium steel , , , , , , ,200 Masonry drills DIN 8039 carbide tipped, with straight shank, each piece in plastic pocket CL , ,5 45 0, , ,5 50 0, , ,5 55 0, , ,5 65 0, , , , , , , , , ,092 Masonry drills DIN 8039 carbide tipped, with straight shank, each piece in plastic pocket CL , , , , , , , , , , , , , , ,64 Masonry drill bit High-Helix Masonry drill bit, sand blasted, countersink construction, professional quality , , , , , , , , , ,00... convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

50 Drills SDS hammer drill bits Top quality: SDS-Plus fast fitting system: 2 lengthwise slots and 2 round slots at the end of the shank. Universal tool fitting for different types of hammer drills according to the SDS-Plus system SDS hammer drill bits Workshop quality: SDS-Plus fast fitting system: 2 lengthwise slots and 2 round slots at the end of the shank. Universal tool fitting for different types of hammer drills according to the SDS-Plus system CL , , ,5 50 0, ,5 00 0, , , ,5 50 0, /A , /B 60 6,5 00 0, , , /A , , /A , , , /A , , , , , , , , , /A , , , , , , , , / , , , , ,998 SDS-Nut-hammer drill sets Contents: 5, 6, 8 x 0 / 6, 8, 0, 2 x 60 CL , , ,5 50 0, / 60 5,5 00 0, , , ,5 50 0, ,5 00 0, , , , , , , , / , , , , , , , , , , , , / , , , , / , , , , , , , , ,753 SDS-hammer drill sets Contents: 5, 6 x 0, 6, 8, 0 x 60 Art. no pieces 0,26 Art. no pieces 0,679 HSS taps Direct cutter with intermittent teeth, dimensions to DIN 37, or ISO metric thread to DIN 3 Art. no. shank thread ,5 4 0, , , , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

51 Threading bits, taps Screw extractor set Art. no. size /M3-8 0, /M3-24 0,23 Hand taps DIN 352, type N/HSS set of 3, for ISO metric thread to DIN,, 2, 3-cutter, made of HSS, for passthrough threading, for good chipping steel up to approx. 900 N/mm² Art. no. shank thread ,5 0, ,4 2,5,4 0, ,6 2,5, ,8 2,5, , ,2 2,8 2, ,5 2,8 2, ,5 3 0, ,5 4 3,5 0, ,5 4 0, ,5 5,5 4,5 0, , , , , , , , , , , , , , , , , , , , , , , , , ,900 Ratchet wrenches for right-hand and left-hand action Art. no. shank thread ,4-5,5 M3-9 0, ,5-7 M9-2 0, ,4-5,5 M3-9 0, ,5-7 M5-2 0,420 HSS taps set with taps to DIN 352, in metal box, Contents: M3, M 4, M 5, M 6, M 8, M 0, M 2 Art. no. Content M 3,4,5,6,8,0,2 23-pieces 0,696 Combi, threading bit set, made of HSSG SGE-Bit (DBGM) for drilling, threading and countersinking, for stand drilling machines and hand drills, suitable for steel and NE metal up to xd (M 6 = 6 mm thickness of material), up to 600 N/mm² tensile strength, rpm according to the cutting speeds of the tride, in metal box Art. no. Content M 3,4,5,6,8,0 7-pieces 0,88 Adjustable tap wrenches DIN 84 for taps Art. no. thread tap wrench M , M - 0 0, M - 2,5 0, M , M , M9-27 4, M2-33 5, M , convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

52 Threading bits, taps HSS Tap set Contents: hand tap (DIN 352) M 3, 4, 5, 6, 8, 0, 2 Dies (DIN 223) M 3, 4, 5, 6, 8, 0, 2, Dies stock 20 x 5/20 x 7/25 x 9/30 x / 38 x 4 mm tape holder size + 2, in metal box Art. no pieces 3,700 HSS Tap set Contents: Hand tap (DIN 352) M 5, 6, 8, 0, 2, 4, 6, 8, 20 Dies (DIN 223) M 5, 6, 8, 0, 2, 4, 6, 8, 20 Dies holder 20 x 7/25 x 9/30 x /38 x 4/ 45 x 8 mm Tap holder size + 3, in metal box Cone drills Cone drills/aerial drills/hss for edgefree drilling of thin material Art. no. shank min./ max./ , , ,5 0, , , , , ,55 Set of cone drills/hss 4 pieces, in metal box. Art. no pieces 8,200 Art. no pieces 0,50 Combination step drills/hss for metric PG rough thread-through-hole and core-hole-drillings, 6 drilling diameters for core-hole with 5 mm step for sheet metal up to max. 6 mm. Through-hole: 8,5 2,5 6,5 20,5 25,5 32,5 40,5 mm core-hole: 0,5 (M2) 4,5 (M6) 8,5 (M20) 23,5 (M25) 30,5 (M32) 38,5 (M40) Rotary guide value for step drills/cone drills Art. no. min./ max./ ,5 40,5 0,269 Material unleg. Baustahl unleg. Baustahl leg. Stahl Gußeisen Gußeisen Material Edelstahl CuZn Leg. CuZn Leg. AL Leg. Thermo- Duro- Holz < 700 N/mm 2 > 700 N/mm 2 < 000 N/mm 2 < 250 N/mm 2 > 250 N/mm 2 rostfrei spröde zäh < % Si plaste plaste Mild steel Mild steel Alloy steel Cast iron Cast iron Stainless CuZn alloy CuZn alloy Alloy steel Thermo Duro Wood < 700 N/mm 2 > 700 N/mm 2 < 000 N/mm 2 < 250 N/mm 2 > 250 N/mm 2 steel brittle tough < % Si plastic plastic Materialstärke Material gauge 6,0 mm 6,0 mm 6,0 mm 6,0 mm Materialstärke 6,0 mmmaterial 3,0 gauge mm 6,0 mm 6,0 mm 6,0 mm 6,0 mm 6,0 mm 25,0 mm Kühlung Bohrpaste Bohrpaste Bohrpaste Luft Luft Bohrpaste Bohrpaste Luft Luft Bohrpaste H 2 O Luft Luft Lubricant Drilling paste Drilling paste Drilling paste Air Air Lubricant Drilling paste Air Air Drilling paste H 2 O Air Air Vc = m / min m / min > 40 U/min U/min U/min U/min U/min U/min U/min U/min U/min U/min U/min U/min ø mm r.p.m r.p.m r.p.m r.p.m r.p.m ø mmr.p.m r.p.m r.p.m r.p.m r.p.m r.p.m r.p.m 4,0-2, ,0400-2, ,0-20, , , ,0-20, , , ,0-24, , , ,0-30, , , ,0-30, , , ,0-36, , , ,0-40, , , ,0-50, ,0-40, ,0-60, , , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

53 Step drills Step drills /HSS Special type for electric assembly, for sheet metal up to max. 4 mm gauge, for metric thread through-hole drilling, 8,5 2,5 6,5 20,5 25,5 32,5 40,5 mm Art. no. min./ max./ ,5 40,5 0,99 Step drills /HSS thickness up to max. 6 mm, for metric core-hole-drilling, 8,5-0,5-4,5-8,5-23,5-30,5 mm Art. no. min./ max./ ,5 30,5 0,208 Step drills /HSS special type for electric assembly, for sheet steel up to 4 mm thickness, for amoured conduit thread sizes Art. no. min./ max./ , ,5 Step drills /HSS for amoured conduit core removing hole sizes up to 6 mm thickness Art. no. min./ max./ ,50 Step drills /HSS for mechanical engineering and tinsmith working, with 2 cutters, metric Art. no. shank min./ max./ , , , , , , ,62 Step drills assortiment/hss 4 pieces, for mechanical engineering and tinsmith working, with 2 cutters. Contents: 4-2 mm, 2-20 mm, mm, paste Art. no pieces 0,597 Drilling paste high quality drilling paste, in practical container, 7 g Art. no , convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

54 Screw punches, hollow core cutters, threading dies Spare screws Spare screws for screw punches Nipple threading dies with guide, replaceable dies and taps Art. no. size x,0 0, x,5 0, x,5 0,39 Screw punches matching for cable connection acc. the new Euro-Norm EN 50262, with 3 cutting edges for iron sheet up to 2 mm, steel sheet up to,5 mm, stainless- steel sheet up to,5 mm thickness Art. no. thread 4090 M 0 0, M 3 0,30 Nipple threading dies with guide, replaceable dies and tap Art. no. screws 8053 metric ISO , metric ISO , metric ISO , metric ISO , metric ISO , metric ISO , metric ISO , PG PG , PG PG , PG PG3, , PG PG , PG PG , PG PG , PG 30, , PG PG , PG PG , PG PG , PG / ,250 Art. no. thread 4020 M 0, M 3 0,20 Complete stocks, metric thread Art. no. thread 4024 M 6, M 20, M 25, M 20, M 25, M 50, M 63 3, M 32, M 40 2,850 Dies, metric thread Taps for armoured steel conduits, metric thread Art. no. thread , , , , , , ,688 Art. no. thread M6 0, M20 0, M25 0, M32 0, M 40 0, M 50 0, M 63 0,79 Guides, metric Adjustable tap wrenches short pattern Art. no. thread tap wrench 4080 M , M ,900 Art. no. thread , , , , , , , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

55 Diamond hollow core cutters Diamond hollow core cutters Carrier turned from solid material, suitable for soft materials and brickwork, concrete and artificial stone, takes M 6, without receiving shaft and centre drill, laser-welded, use only without impact Art. no , ,590 Diamond hollow core cutters shank M 6, with tapered cylindrical drill bit, hexagon fitting, laser-welded, use only without impact Art. no. shank /K 68 SDS-plus 0, /K 82 SDS-plus 0,764 Diamond hollow core cutter special Diamond drill bit for socket outlets with laser wielded segments, suitable for soft materials and brickwork, concrete and artificial stone, optimal rotating speed U/min, maximum rotating speed U/min, use only without impact Art. no. shank /K 68 SDS-plus 0, /K 82 SDS-plus 0,787 Drill for Diamond hollow core cutters tapered shank ,044 Shank for hollow core cutters, SDS-Plus SDS-Plus-shank, M 6, conic shank 23068/K 00 SDS-plus 0,50 Hollow core cutters for tungsten carbide tipped, with centre bit and 00 mm hexagon shank, SW 2 Art. no. shank hexagon 0, hexagon, SDS-plus 0, SDS-plus,079 Centre bits with tungsten carbide tipped cutting edge for tungsten carbide tipped hollow core cutters, cylindrical ,038 Shank for hollow core cutters, SW 2 hexagon shank, SW 2, for centre bits, cylindrical cutter Art. no. shank hexagon 0,39 Shank for hollow core cutters SDS-Plus-shank, M 6, connection thread, cylindrical cutter shank SDS-plus 0,2... convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

56 Cutting discs Diamond cutting blades laser-welded, high diamond concentration, long life, for the professional works Industrial quality Hollow saws Hard metal hole saw Art. no , , (FUBAG) 0, (FLEX) 0, , , , ,256 Diamond cutting blades sintered Profi Quality Art. no , , , ,68 Art. no. /Inch /4 9 0, /8 22 0, , /6 27 0, /6 30 0, /4 32 0, /8 35 0, /6 40 0, /4 44 0, , /8 54 0, /8 60 0, /2 64 0, /6 65 0, /6 68 0, /4 70 0, /8 73 0, , /8 79 0, /4 83 0, , /2 4 0,773 HSS-Bi-metal hole saw set cogging Diamond cutting blades, FL tiles Profi Quality, continuous rim. universal application, granite, tiles, ceramics, stone- and marble-flatters Art. no ,2 Diamond cutting blades, TBM Turbo Profi quality Art. no , , ,706 Art. no. /Inch /6 4 0, /4 9 0, /8 22 0, , /6 27 0, /6 30 0, /4 32 0, /8 35 0, /6 40 0, /4 44 0, , /8 54 0, /8 60 0, /2 64 0, /6 65 0, /6 68 0, /4 70 0, /8 73 0, , /8 79 0, /4 83 0, , /2 4 0, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

57 Adapter for hollow saws Measuring tools Adapter quick lock hexagon shank Art. no. size , ,07 Certre drills for / type shank universal 9 hexagon 0,020 Carbide tipped hollow saw with border senk D mm, total length 75 mm, multi purpose hole saw for turning operation suitable for plastic, tiles up to hardness 6 and plaster material, set consisting of hole saw D 68, shank SW, carbide-tipped centre drill bit, with border senk D 68 Art. no. shank hexagon 0,659 Folding rules with spring joint, mm-graduations on both sides type width wood 6 0, fibre glass 6 0,38 0 Measuring tapes with spring steel tapes, case: plastic, with automatic return motion and locking key, tape with stove-enamel finished width , ,79 Measuring tapes in metal case, with woven rayon tape, strengthened against streching by 8 bronze wires woven into tape, scale graduations both sides: metres and centimetres width , , , ,857 Aluminium spirit levels bubble level made of acrylic glass, accuraty of measurement: 0,043 = 0,75 mm/m , , , , , convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

58 Measuring tools Electrician s safety levels nonconducting plastic material, with 2 tubes horizontal and vertical Engineers squares manufactured from steel, bright , ,274 Cabinet levels Torped type, nonconducting plastic material, with 3 tubes horizontal, vertical and 45 width x , x , x , x ,445 Engineers squares manufactured from steel, bright ,078 Torped-level with 3 tubes horizontal, vertical and ,067 Precision pocket vernier calipers Stainless manufactured from stainless steel, completely hardened, with measuring nibs, depth gauge and thread tables, in plastic wallet, /20 or /28 mm, size 40 mm width x , x , x , x , x ,783 Steel point scribers knurled handle, replaceable screw-out hardened points, handle with one straight and one bent point (90 ) ,046 Art. no ,57 Precision pocket vernier calipers digital manufactured from stainless steel, completely hardened, with measuring nibs, depth gauge and thread tables, in plastic box with sight window, /20 or /28 mm, size 40 mm Art. no , TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

59 Standard program Screws Screws assortments...convincing solutions

60 Wood screws Universal countersunk screw Chipboard screw, galvanised, counter-sunk head, Pozidriv PU PrU ,0 PZ ,0 PZ ,0 PZ ,5 PZ ,5 PZ ,5 PZ ,5 PZ ,5 PZ ,0 PZ ,0 PZ ,0 PZ ,0 PZ ,5 PZ ,5 PZ ,5 PZ ,0 PZ ,0 PZ ,0 PZ ,0 PZ ,0 PZ ,0 PZ ,0 PZ ,0 PZ Universal pan head screw Chipboard screw, galvanised, pan head, Pozidriv cross-head PU PrU ,5 PZ ,5 PZ ,0 PZ ,0 PZ ,0 PZ ,0 PZ ,0 PZ ,5 PZ ,5 PZ ,5 PZ ,0 PZ ,0 PZ ,0 PZ ,00 0,00 0,003 0,003 0,003 0,003 0,004 0,003 0,004 0,005 0,005 0,007 0,007 0,008 0,0 0,003 0,003 0,003 0,004 0,004 0,004 0,004 0,005 0,005 Chipboard screw countersunk TwinSpeed Chipboard screw, galvanised, counter-sunk head, Tx, double helix thread, considerably shortened screw-in times when compared to traditional screws thanks to the double start thread. Uses: Wood, plywood, plasterboard, rawlplugs PU PrU ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,5 Tx ,5 Tx ,5 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx Chipboard screw pan head TwinSpeed Chipboard screw, galvanised, pan head, Tx, double helix thread, considerably shortened screw-in times when compared to traditional screws thanks to the double start thread. Uses: Wood, plywood, plasterboard, rawlplugs PU PrU ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx ,5 Tx ,5 Tx ,5 Tx ,0 Tx ,0 Tx ,0 Tx ,0 Tx Hexagonal wood screws in accordance with DIN 57, galvanised, general requirements according to DIN 267 Part 0,003 0,003 0,003 0,003 0,004 0,003 0,004 0,005 0,005 0,008 0,0 0,003 0,003 0,003 0,004 0,004 0,004 0,004 0,005 0,005 Hexagonal wood screws, hot zinc dipped in accordance with DIN 57, hot zinc dipped, general requirements according to DIN 267 Part WS PU PrU 79022/V 80 6,0 0 Hexagon /V 60 8,0 3 Hexagon /V 80 8,0 3 Hexagon /V 60 0,0 7 Hexagon 0 00 Dry wall screws galvanised, counter-sunk head, Tx 0,05 0,02 0,027 0,036 WS PU PrU ,0 0 Hexagon ,0 0 Hexagon ,0 0 Hexagon ,0 3 Hexagon ,0 3 Hexagon ,0 3 Hexagon ,0 3 Hexagon ,0 7 Hexagon ,0 7 Hexagon ,0 7 Hexagon 0 00 Hooks galvanised 0,008 0,02 0,05 0,08 0,02 0,027 0,033 0,036 0,048 0,055 PU PrU ,9 Tx ,9 Tx Art. no. SftL PU PrU , , ,006 0, TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

61 Tin screws, assembly screws TwinSpeed self tapping screw galvanised, Linsenkopf, Philips cross-head and double helix thread, considerably shortened screw-in times when compared to traditional screws thanks to the double start thread. Uses: Wood, plywood, plasterboard, rawlplugs PU PrU ,5 PH ,5 PH ,2 PH ,2 PH ,2 PH ,2 PH ,2 PH ,2 PH ,2 PH ,2 PH 2 Plate screw DIN 7504 in accordance with DIN 7504M (formerly N), self-tapping, hardened steel, galvanised, pan head with Phillips slot, plate screw thread according to DIN 7970 PU PrU ,5 PH ,5 PH ,9 PH ,9 PH ,9 PH ,2 PH ,2 PH ,2 PH ,2 PH ,2 PH ,8 PH ,8 PH ,8 PH ,8 PH Plate screw DIN 7504, Tx in accordance with DIN 7504M (formerly N), self-tapping, hardened steel, galvanised, Tx, plate screw thread according to DIN 7970 PU PrU ,2 Tx ,2 Tx ,2 Tx ,2 Tx 20 Mounting screws galvanised with washer, Philips cross-head, self-cutting PU PrU ,2 PH ,2 PH ,2 PH ,2 PH 2 Mounting screws self-cutting and self-boring, galvanised with washer, Tx PU PrU ,2 Tx ,2 Tx ,2 Tx 20 0,00 0,00 0,00 0,00 0,003 0,003 0,005 0,00 0,00 0,00 0,003 0,003 0,003 0,00 0,003 0,00 Mounting screws self-cutting and self-boring, galvanised with washer, Philips cross-head PU PrU ,2 PH 2 Machinery screws, cylinder screws Hexagonal machine screws according to DIN 933, continuous thread, galvanised, 8.8 quality WS PU PrU M6 0 Hexagon M6 0 Hexagon M6 0 Hexagon M8 3 Hexagon M8 3 Hexagon M8 3 Hexagon M0 7 Hexagon M0 7 Hexagon M2 9 Hexagon M2 9 Hexagon Socket cup screw DIN 84 Form A in accordance with ISO 207, EN 2207 or DIN 84, Form A, with slot, made of hardened steel, galvanised, 4.8 quality PU PrU M3 slot 5,5x0, M3 slot 5,5x0, M4 slot 7,0x, M4 slot 7,0x, M4 slot 7,0x, M5 slot 8,5x, M5 slot 8,5x, M5 slot 8,5x, M6 slot 0,0x, M6 slot 0,0x, M6 slot 0,0x, Machine screw counter sunk continuous thread, zinc-plated, counter-sunk head, Pozidriv PU PrU M3 PZ M3 PZ M3 PZ M3 PZ M4 PZ M4 PZ M4 PZ M4 PZ M5 PZ M5 PZ M5 PZ M5 PZ 2 0,00 0,006 0,007 0,008 0,02 0,04 0,06 0,023 0,028 0,040 0,047 0,00 0,00 0,003 0,003 0,004 0,005 0,005 0,055 0,007 0,00 0,00 0,003 0,003 0,004 0,004 0,004 0,005 0, convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com

62 Hexagonal nuts, washers Screws assortments Hexagonal nut DIN 934 in accordance with ISO 4032, EN or DIN 934, steel galvanised, 8 quality Art. no. WS PU PrU M3 5, M4 7, M5 8, M6 0, M8 3, M0 7, M2 9,0 Washers DIN 25 in accordance with ISO 7089, EN or DIN 25, Form A without chamfer, steel galvanised 0,00 0,00 0,00 0,005 0,0 0,00 Mix Screws assortment box Content:.425 screws, in plastic bulk storage chest 420 x 350 x 60 mm Qty. Description Size Art. no. 200 universal counter-sunk screws 3,5 x 20 PZ universal counter-sunk screws 3,5 x 30 PZ universal counter-sunk screws 3,5 x 40 PZ universal counter-sunk screws 4,5 x 35 PZ universal counter-sunk screws 4,5 x 50 PZ universal counter-sunk screws 5,0 x 80 PZ universal counter-sunk screws 6,0 x 50 PZ universal pan head srews 3,5 x 30 PZ universal pan head srews 4,0 x 40 PZ universal pan head srews 5,0 x 50 PZ hexagonal wood screws 6 x hexagonal wood screws 6 x Art. no. M d d4 PU PrU M3 3,2 7, M4 4,3 9, M5 5,3 0, M6 6,4 2, M8 8,4 6, M0 0,5 20, ,000 0,000 0,00 0,00 0,003 Washers in accordance with ISO 7093, DIN 902N, zinc-plated steel Art. no. M d d4 PU PrU M4 4,3 2, M5 5,3 5, M6 6,4 20, M8 8,4 25, M0 0,5 40, M2 3,0 40,0 Spring washers according to DIN 27, form A, curved, zinc-plate steel Art. no. M d d4 PU PrU M6 6,4, M8 8,4 4, M0 0,5 8, M2 3,0 2, 0,00 0,00 0,02 0,0 0,00 0,00 0,00 0,003 0,004 Art. no. empty Content pcs 5,022 Pan head Screws assortment box Content:.700 screws, in plastic bulk storage chest 420 x 350 x 60 mm Qty. Description Size Art. no. 200 universal pan head srews 3,5 x 30 PZ universal pan head srews 3,5 x 40 PZ universal pan head srews 4,0 x 30 PZ universal pan head srews 4,0 x 40 PZ universal pan head srews 4,0 x 50 PZ universal pan head srews 4,5 x 40 PZ universal pan head srews 4,5 x 50 PZ universal pan head srews 5,0 x 30 PZ universal pan head srews 5,0 x 40 PZ universal pan head srews 5,0 x 50 PZ Bit-Box 7-pcs., incl. holder 0220 PrU Art. no. empty Content pcs 5,000 PrU 240 TL Weight in Total length CW L W D Cutting width Length in mm Width in mm Depth in mm Cont. BL mm² St. Contents Blade length Diameter in mm² Strength c-hole Mat. TMA WS Core hole Material Tested/Measured area Wrench size Sbl. Col. PU Saw blade length Colour Packing unit/piece

63 Screws assortments Countersunk Screws assortment box Content:.800 screws, in plastic bulk storage chest 420 x 350 x 60 mm Qty. Description Size Art. no. 200 universal counter-sunk screws 3,5 x 20 PZ universal counter-sunk screws 3,5 x 30 PZ universal counter-sunk screws 3,5 x 40 PZ universal counter-sunk screws 4,0 x 30 PZ universal counter-sunk screws 4,0 x 40 PZ universal counter-sunk screws 4,0 x 50 PZ universal counter-sunk screws 4,5 x 40 PZ universal counter-sunk screws 5,0 x 40 PZ universal counter-sunk screws 5,0 x 50 PZ universal counter-sunk screws 5,0 x 60 PZ universal counter-sunk screws 6,0 x 60 PZ universal counter-sunk screws 6,0 x 80 PZ Bit-Box 7-pcs., incl. holder 0220 Art. no. empty Content pcs 5,000 Mix Tx Screws assortment box Content:.475 screws, in plastic bulk storage chest 420 x 350 x 60 mm Qty. Description Size Art. no. 200 TwinSpeed counter-sunk screws 2,9 x 5 Tx TwinSpeed counter-sunk screws 2,9 x 30 Tx TwinSpeed counter-sunk screws 2,9 x 40 Tx TwinSpeed counter-sunk screws 4,2 x 35 Tx TwinSpeed counter-sunk screws 4,2 x 50 Tx TwinSpeed counter-sunk screws 4,8 x 50 Tx TwinSpeed counter-sunk screws 6,3 x 80 Tx TwinSpeed pan head srews 3,9 x 30 Tx TwinSpeed pan head srews 3,9 x 40 Tx TwinSpeed pan head srews 4,8 x 50 Tx hexagonal wood screws 6 x hexagonal wood screws 6 x Art. no. empty Content pcs 5,022 PrU PrU Countersunk Screws assortment box Content:.800 screws, in plastic bulk storage chest 420 x 350 x 60 mm Qty. Description Size Art. no. 200 universal counter-sunk screws 3,0 x 5 PZ universal counter-sunk screws 3,0 x 25 PZ universal counter-sunk screws 3,0 x 40 PZ universal counter-sunk screws 4,0 x 30 PZ universal counter-sunk screws 4,0 x 40 PZ universal counter-sunk screws 4,0 x 50 PZ universal counter-sunk screws 4,5 x 40 PZ universal counter-sunk screws 5,0 x 40 PZ universal counter-sunk screws 5,0 x 50 PZ universal counter-sunk screws 5,0 x 60 PZ universal counter-sunk screws 6,0 x 60 PZ universal counter-sunk screws 6,0 x 80 PZ Bit-Box 7-pcs., incl. holder 0220 Art. no. empty Content pcs 5,000 Mix Tx plus Screws assortment box Content:.475 screws, in plastic bulk storage chest 420 x 350 x 60 mm Qty. Description Size Art. no. 200 TwinSpeed counter-sunk screws 2,9 x 5 Tx TwinSpeed counter-sunk screws 2,9 x 30 Tx TwinSpeed counter-sunk screws 2,9 x 40 Tx TwinSpeed counter-sunk screws 4,2 x 35 Tx TwinSpeed counter-sunk screws 4,2 x 50 Tx TwinSpeed counter-sunk screws 4,8 x 50 Tx TwinSpeed counter-sunk screws 6,3 x 80 Tx TwinSpeed pan head srews 3,9 x 30 Tx TwinSpeed pan head srews 3,9 x 40 Tx TwinSpeed pan head srews 4,8 x 50 Tx hexagonal wood screws 6 x hexagonal wood screws 6 x Bit-Box 7-pcs., incl. holder 0220 Art. no. empty Content pcs 5, convincing solutions Germany: HAUPA, Koenigstr , Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com PrU PrU

64 A Index page Accessories for Adapter 42 Adapter quick lock 235 Adjustable single-head wrench 9 Adjustable single-head wrench with ratch function 9 Adjustable tap wrenches 232 Adjustable tap wrenches DIN Adjustable wrenches to DIN 37 A 000 V 5 Al and Cu cable lugs, longitudinally sealed 03 Al and Cu crimp terminals, longitudinally sealed 03 Al compression cable lugs 0 Al compression cable lugs acc. to DIN 46329, longitudinally sealed 0 AL compression joints, medium voltage 0-30 KV, longitudinally sealed 05 Al crimp terminal 0 Al crimp terminal DIN 46329, longitudinally sealed 0 AL reduction compression joints, medium voltage 0-30 KV, longitudinally sealed 06 AL screw connectors medium voltage 0-30 KV 07 AL screw terminals medium voltage 0-30 KV 07 Al/Cu non-tension compession joints with Cu bolt 03 Al-compession joints, medium voltage 0-30 KV 05 Al-Crimp connector DIN Part 2 02 Al-Cu reducing connectors 04 Alignment tool, 3/8 000 V 57 Allen keys DIN 9 85 Allen keys set 84, 85 Allen keys set Tx 85 Allround soft-grip scissors 5 Alu crimp connectors with Cu pins 03 Aluminium spirit levels 235 Angled cable lugs 90 acc. to DIN Angled terminals 90 acc. to DIN Angled tubular cable lugs 90, standard series 90, 9 Assortment box (Polypropylene) 24 Assortment for Combi-Crimp DIN 67 Assortment of insulated terminals 78 Assortment of ring terminals, uninsulated 08, 09 Assortment of tubular terminals, light 09 Assortment of tubular terminals, standard 08 Assortments of wire-end sleeves 66, 67 Auger bits, type Lewis 227 Automatic cable stripper 2 Automatic wire stripper 20 Automatic wire stripper 000 V 44 Automatic wire stripper HAUPA-Special 20 Automatic wire stripper Super Plus 20 B page Backpack 26 Backpack Basic VDE 69 Backpack Basic 26 Backpack VDE Plus 69 Backpack VDE 69 Bag for storing 74 Ball point allen keys 84, 85 Battery 53 Battery powered crimping tool SC-2 43 Battery powered crimping tool SO-6 46 Battery powered cable cutter AS Battery powered cable cutter AS Battery powered cable cutter AS Battery powered cable cutter SAS Battery powered crimping tool SL-2 44 Battery powered crimping tool AC Battery powered crimping tool AC Battery powered crimping tool AD Battery powered crimping tool AD Battery powered crimping tool AH-2 50 Battery powered crimping tool AH-6 45 Battery powered crimping tool AO-6 46 Battery powered crimping tool TC Battery powered crimping tool TC Battery powered crimping tool SH-6 45 Battery powered wire cutter AS6S-32 3 Battery powered wire cutter AS6ST-20 3 Battery powered wire cutter AS Battery-hydraulic pump PA Battery-powered torch 22 Bi-metal hole saws 234 Bits for PZ slot profile 87 Bolt cutter 7 Border cutter 6 Box for end sleeves 25 Brass pad locks 26 Bulk storage chest for twist drills 226 Butt connectors 72, 75, 77 Butt connectors DIN 4634 part, type B 88 Butt connectors, made from pure nickel 00 B page Butt connectors, standard series 9 Butt-connector for fine stranded high flexible conductors 94 Butt-connectors, made from pure nickel 00 C page Cabinet levels 236 Cable cutter 000 V 45 Cable cutter with a snap 6 Cable cutter with a snap VDE 44 Cable cutters 6, 7, 8, 9, 44 Cable cutters 000 V 44, 45 Cable cutters 000 V with spring joint 44 Cable cutters Super light 7 Cable cutters VDE 40 Cable cutters VDE with spring joint 40 Cable cutters with spring joint 6 Cable glands IP 68, metric or PG, assembled with washer and lock nut 20 Cable grips 27 Cable grips for electrical installations 32 Cable grips for subterraneous cable laying 32 Cable knive 000 V 46 Cable lugs acc. to DIN , 97 Cable lugs with 2 oval holes acc. to DIN Cable pulling device FIX 30 Cable pulling device FOX 28 Cable pulling device HAUPA-FIBRE 27 Cable pulling device KING 3 Cable pulling device POWER 3 Cable pulling device SIX 29 Cable pulling device STRONG 3 Cable Sheath Stripper 6 Cable stripper Kabifix LWL 7 Cable stripper Kabifix 7 Cable stripper ASI, automatic 2 Cable stripper Outlet 20 2 Cable stripper, automatic 9 Cable stripper, manual 9 Cable stripper, manual optical fibre 9 Cable strippers for short-circuit proof lines 8 Cable strippers for short-circuit proof lines 8 Cable stripping knives 000 V 46 Cable stripping knives 7, 20 Cable stripping or lead tube knives 20 Cable ties 2, 3 Cable ties UVplus 3 Cable ties with fixing eye 4 Cable ties with marking space 4 Cable unwinder 22 Carbide tipped hollow saw with border senk D Carpenters pencils 200 Carrying belts 26 Casing drill 227 Catch device made from zinced steel 30, 32 Centre bits with tungsten carbide tipped cutting edge 233 Centre punch to DIN Certre drills for / Chalk 200 Chalk line roller Fast Squid, 5 m 200 Chalk line roller Squid, 5 m 200 Checking mirrors 84 Chipboard screw countersunk TwinSpeed 238 Chipboard screw pan head TwinSpeed 238 Circuit tester Control 49 Claw hammer 206, 207 Claw retrievers 83, 84 Cleaning brushes Safety Line 57 Climping irons 74 Climping irons acc. to DIN Combi, threading bit set, made of HSSG SGE-Bit (DBGM) 229 Combi-Crimping pliers 26 Combination pliers 2C DIN Combination pliers DIN 5244 VDE 39, 4 Combination pliers DIN ISO 5244 VDE 43 Combination scissors 5 Combination spanners similar to DIN Combination step drills/hss 230 Combined dowel and contact spanners 57 Complete assembly case 6 Complete stocks, metric thread 232 Compression joints acc. to DIN Part (for non-tension connections) 96, 99 Compression joints acc. to DIN 48085, Part (for full-tension cable connections) 96 Cone drills/aerial drills/hss 230 Connecting rod 42 Connection shackle for probes 6 mm 29 Connection sleeve for probes mm 30, 32 Connection sleeve for probes 3 mm 27 C page Connection sleeve for probes 4.5 mm 28 Connection sleeve for probes 7.5 mm 30, 32 Connection sleeve for probes 9 mm 30, 32 Connection sleeve with rotator 30, 32 Connector for fine-wired highly flexible conductors 94 Contact files 208 Cord und cable grips 32 Cotton gloves for putting underneath 72 Counter hold spanners 000 V 50 Covering blankets transparent 75 Crimp connector DIN Part 96, 99 Crimp connector DIN 48085, Part 96 Crimp connector, AL medium voltage 0-30 KV 05 Crimp connectors AL medium voltage 0-30 KV longitudinally sealed 05 Crimp fork terminals without insulation DIN Crimp insert for Hirschmann contacts 30 Crimp insert for Tyco contacts 30 Crimp inserts for Huber & Suhner contacts 30 Crimp inserts for multi-contact contacts 30 Crimp pin terminals without insulation DIN Crimp ring terminals without insulation DIN Crimp terminals DIN , 97 Crimp terminals with 2 oval holes 98 Crimp-Grip pliers 28 Crimping dies 36, 45, 50, 5 Crimping dies DIN Cu + Al 45, 50 Crimping dies DIN Cu + Al for , 50 Crimping dies for Crimping dies for Crimping dies for Crimping dies for Crimping dies for Crimping dies for Crimping dies for cable lugs / end sleeves 33, 43 Crimping dies for coaxial cable 33, 43 Crimping dies for end sleeves 33, 43 Crimping dies for flat connectors 33, 43 Crimping dies for insulated crimp cable lugs 33, 43 Crimping dies for Photovoltaik MC3 33, 43 Crimping dies for Photovoltaik MC4 33, 43 Crimping dies for shrink connectors 33, 43 Crimping dies for TWIN end sleeves 33, 43 Crimping dies for uninsulated terminals 33, 43 Crimping dies standard for Crimping dies, DIN-connection, Cu 54 Crimping dies, standard 54 Crimping headstock 44 Crimping headstock HKD Crimping headstock KD Crimping headstock KH-2 50 Crimping headstock KO-6 46 Crimping pliers 24, 25,26, 27, 28, 29,30, 35, 36, 37, 38, 39 Crimping pliers Multi 34 Crimping pliers Combi-Crimp 33 Crimping pliers for coax-connections 29 Crimping pliers for modular plugs 3, 32 Crimping pliers for shrink connectors 26 Crimping pliers for twin end sleeves 24 Crimping pliers X-Crimp 33 Crimping terminals and connectors, DIN 54 Crimpset MULTI Photovoltaik 30 Crimpset MULTI 34 Cross connectors, standard series 92 Cross slotted screwdrivers 2C, Phillips 80, 8 Cross slotted screwdrivers 2C, Pozidriv 80, 8 Cross type socket wrenches 000 V 50 Countersunk Screws assortment box 24 Cupal washer 04 Cutting pistol for PVC pipes 5 D page Decoiler Decoiler Decoiler Deep hole marker 200 Diamond cutting blades 234 Diamond cutting blades, FL tiles 234 Diamond cutting blades, TBM Turbo 234 Diamond hollow core cutter special 233 Diamond hollow core cutters 233 Dies 3, 32, 5 Dies for copper standard 47 Dies for end sleeves 47 Dies for rounding of square conductors 47 Dies for sealing pliers 77 Dies for Solar contacts Amphenol 30 Dies for terminals and connectors DIN 47 Dies for terminals and connectors standard 47 Dies for tubular terminals F-Type

65 We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential. D page Dies for tubular terminals Light T/M 47 Dies for aluminium cable lugs 47 Dies, metric thread 232 Dispenser box with insulated end sleeves (DIN) 65 Dispenser box with insulated end sleeves (french) 65 Dispenser box with insulated end sleeves (german) 65 Dispenser box with Twin end sleeves (DIN) 65 Dispenser box with uninsulated end sleeves 65 Dispenser for plastic bottle 33 Double edged cable cutter 44 Double ended ring spanner sets DIN Double ended ring spanners to DIN Double ended spanners acc. to DIN Double ended spanners set acc. to DIN Double faced sledges to DIN Double-locking-cable ties 3 Dowel Mounting sockets/christmas trees 4 Drill for Diamond hollow core cutters 233 Drill type machine bits for wood 227 Drilling paste 23 Dry wall screws 238 Dust masks 73 E page Ear defenders acc. to EN Ear muffs for helmet 73 Ear protection plugs 73 Elastic cable distributors 82 Elastic connectors with socket sleeves (male) 82 Electrical insulating tape for the professional application 24 Electrician s safety levels 57, 236 Electricians screwdrivers 2C 80, 8 Electricians protection visor acc. to EN Electricians boots acc. to EN 5032 Class 0 72 Electricians protection helmets acc. to DIN EN Electricians scissors 5 Electricians chisels 206 Electro-hydraulic pump PN700 l 55 Electro-hydraulic punching tool AS-6 42 Electronic screwdriver set 83 Electronic screwing bit set 83 Elektro-hydraulic pump PN Empty dispenser box 65 End connectors 73 End sleeve assortment 66, 67 End sleeve assortment serie DIN 67 End sleeves 60, 6 End sleeves DIN colour range 62, 63 End sleeves for short-circuit-proof cables 64 End sleeves in tape form, to DIN P End sleeves, colour range I, (french) 62, 63 End sleeves, colour range II, (german) 62, 63 Engineers hammer 207 Engineers hammer DIN Engineers squares 236 Engineers screwdrivers 2C 80, 8 Engraving for sealing pliers 77 ESD Electronic combination pliers 97 ESD Electronic flat nose pliers 97 ESD Electronic front cutter 97 ESD Electronic needle nose pliers 96 ESD Electronic needle nose pliers, 45 angle 96 ESD Electronic pliers set 97 ESD Electronic round nose pliers 97 ESD electronic screwdriver set 83 ESD electronic screwdrivers 82, 83 ESD Electronic side cutter without cutting-facet 97 ESD Electronic side cutters 97 ESD Electronic thin needle nose pliers 96 ESD Electronic thin needle nose pliers, 45 angle 96 Exchangeable Vario handle 38 Extensions 52, 53, 54, 55, 56 Extensions with bit adapter 000 V 54, 56 F page Fallstop acc. to EN Figure tin snips 2 Files assortment 208 Firmer chisels DIN Fittings for hexagon socket screws 53, 54, 55, 56 Fittings solder acc. to DIN 29453, solid 203 Fittings solder acc. to DIN EN Flat bits 227 Flat cable pliers 20 Flat chisels to DIN 6453 A, flat oval shank 206 Flat nose pliers 000 V 40 Flat terminals 73, 76, 77, 8, 82 Flatcable stripper 7 Flexible screwdrivers Piccolo 83 F page Focus torch 22 Folding rules 235 Fork terminals DIN , 74 Fork terminals without insulation DIN Front bulb with shackle M2 30, 32 Front bulb with shackle M5 28 Front bulb with shackle M6 29 Front cable cutter 0 Front cutters VDE 4 Front/end sleeve M2 30, 32 Front/end sleeve M5 27, 28 Front/end sleeve M6 29 Front-Crimping pliers 24, 25 Fully insulating 000 V PVC flat nose pliers 40 G page Gloves in accordance with DIN EN Grease for soft soldering acc. to DIN 85-F-SW Grip pliers 98 Guides, metric 232 Guiding head 0 mm with loop M5 27, 28 Guiding head 3 mm with loop M5 27, 28 Guiding head 6 mm with loop M5 27 Guiding head 7 mm with loop M5 27, 28 Guiding head M6 29 Guiding head set with heads 7, 0, 3 mm 28 Guiding head with loop M5 28 Guiding head with loop M6 29 Guiding role made from aluminium 29, 30, 32 Guiding role made from aluminium M5 28 Guiding role made from aluminium, length 80 mm 30, 32 H page Hacksaw PUK 2 Hacksaw blades to DIN Hacksaw frame 22 Hacksaw frame 000 V 45 Hammer handles to DIN 5 B 207 Hand cable cutter 9 Hand saw PUK 2 Hand taps DIN 352, type N/HSS 229 Handles with bit adapter 000 V 52 Hard metal hole saw 234 HAUPA Vario Plus 000V replaceable blade system 6 HAUPA Big Box 27 HAUPA Kick-Off Light 62 HAUPA Kick-Off 62 HAUPA Multi Check digital high-capacity multimeter 48 HAUPA Multi Clamp digital miniature clamp transducer AC/DC 600V 48 HAUPA Bit box 87 HAUPA Tool bag 27 HAUPA Tool Jacket 29 HAUPA Trend Box Plus 28 HAUPA Trend Box 28 HAUPA Belt bag Tool belt 27 HAUPA Crimp System for Photovoltaics 30 HAUPA Electronic screwdriver set standard 83 HAUPA Elektrik Crimper 34 HAUPA Pneumatic Crimpers 25 HAUPA Pneumatic crimpes table top versions 25 HAUPA ratchet screwdriver Flex 88 HAUPA Tool bag 000 V 70 HAUPA Tool bag Tool Pouch 26 HAUPA Tool bag VDE 70 HAUPA Tool belt Tool Pouch 26 HAUPA Tool belt Standard 27 Heat protection gloves acc. to EN Heat shrinkable tubes 2 Heavy duty side cutters DIN 5238 A VDE 39 Heavy duty side cutters DIN Hemp tackle block ropes 78 Hexagon sockets 56 Hexagon sockets 000 V 52, 53, 54, 55, 56 Hexagon sockets DIN 7448, extra long, 000 V 56 Hexagonal machine screws 239 Hexagonal nut DIN Hexagonal wood screws 238 Hexagonal wood screws, hot zinc dipped 238 Holding device 000 V 57 Hole-cutting tin snips 2 Hollow core cutters 233 Hook-and-loop cable ties 4 Hooks 238 Household hatchet 206 HSS Tap set 230 HSS taps Direct cutter 228 HSS taps set 229 HSS-Bi-metal hole saw set cogging 234 H page Hydraulic cable cutters 2 Hydraulic crimping headstock + cylinder KH Hydraulic crimping headstock KC Hydraulic crimping headstock KC Hydraulic crimping headstock KH Hydraulic crimping headstock set 54 Hydraulic cutter 2 Hydraulic cutting headstock 2 Hydraulic foot pump F Hydraulic hand pliers HC Hydraulic hand pliers HC Hydraulic hand pliers HD Hydraulic hand pliers HD Hydraulic hand pliers HH-2 50 Hydraulic hand pliers HH-6 45 Hydraulic hand pliers HO-6 46 Hydraulic hand pliers MO-6 with exchangeable dies 46 Hydraulic hand-punch-cutter HS-6 42 Hydraulic hand-punching tool HS-8 42 Hydraulic high-pressure hose 55 Hydraulic oil 53 Hydraulic safety cutting fittings 2 Hydraulic safety life line cable cutter 2 I page Industrial cleaning wipes 20 Industrial hot air blower for shrink hoses 2 Industrial screwdriver set with replaceable dual blades 82 Infrared thermometer 49 Inserts for hexagon socket screws 000 V 52 Insulated crimp cable lugs 86 Insulated tweezers VDE 000 V 57 Insulating floor mats acc. to IEC-6-Class 2 75 Insulating floor mats acc. to VDE Insulating sleeves 82 Insulator cover for gable insulators 000 V 76 ISO nailing clips 8 J page Jointing chisel 206 Junior hacksaw 2 Junior hacksaw DIN 6473 C 2 K page Kabeleinziehgerät Economy 27 Kevlar cutter 5 Keys set Tx 84 L page Lead seals 77 Locked torque wrench 000 V 54, 56 Long chain nose pliers DIN 5236 A VDE 39, 4 Long chain nose pliers DIN ISO 5745 VDE 43 Long chain nose pliers DIN ISO 5754 VDE 43 Long chain nose pliers DIN Long flat nose pliers DIN Long round nose pliers DIN Loose knives 20 M page Machine screw counter sunk 239 Magazine for Quadro 25 Magnetic holder 87 Magnetic retriever 84 Mains adapter 53 Marking chalk 200 Masonry drill bit 227 Masonry drills DIN Measuring tapes 235 Metal box 36, 37, 38 Microelectronic side cutters 98 Mini torch 22 Miniature trimming set 84 Mix Tx plus Screws assortment box 24 Mix Tx Screws assortment box 24 Mix Screws assortment box 240 More possibilities of dies - please, order separately 34 Mounting screws convincing solutions 243

66 N Index page Nailing clips for flat cable 7 Nailing clips for round cable 7, 8 Network range 32 Network service case Connect 22 Network service case HAUPA 220 Network-Servicecase 22 NH-protecting caps 000 V 76 Nipple threading dies 232 No.-Cat 8 O page Open-jawed ring wrench with ratch function 90 Optical fibre stripper 8 P page Paint scrapers 200 Pan head Screws assortment box 240 Parallel connectors 72, 75 Parallel connectors DIN 4634 part, type A 88 Parallel rope tension clamps 78 PC Cat 8 PC-Strip 8 Perlon fish tapes 26 Personal safety set 75 Piercing awls 2C 82 Pin punch set 206 Pin terminals without insulation DIN Pipe cleaning brush 30, 32 Pipe wrenches 98 Plan grip pliers VDE 43 Plaster cups 200 Plaster pan 200 Plastic clips 000 V 76 Plastic hammer 207 Plastic seal wire 77 Plastic seals 77 Plastic wedges 57 Plate screw DIN Plate screw DIN 7504, Tx 239 Pliers set 2C 95 Pliers set, 2-coloured coating-insulation 42 Pliers set VDE 2C, sheathed handles 40 Polyethene spiral binding 22 Precision pocket vernier calipers digital 236 Precision pocket vernier calipers Stainless 236 Precision stripper for optic fibres 8 Precision stripper PWS Plus 8 Pulling unit with loop M5 27 Punching dies, metric 42 Punching dies, PG 42 Punching dies, square 42 PVC hammer 000 V 57 Q page Quadro complete set in case 25 Quadro with magazine 25 Quick charger 53 R page Rainbow-Pack 24 Rapid connectors 73 Ratchet ring spanners 000 V 5 Ratchet wrenches 229 Reducing crimp connector AL medium voltage 0-30 KV, longitudinally sealed 06 Releasable cable ties 3 Replacement blades, 4-pcs. 46 Replacement glass fibre rod 27 Replacement glass fibre rod FIX 30 Replacement glass fibre rod FOX 28 Replacement glass fibre rod POWER 3 Replacement glass fibre rod SIX 29 Replacement glass fibre rod STRONG 3 Replacement heads 6, 7, 207 Reversible ratchet 000 V 52, 53, 54, 55, 56 Right angle allen keys 000 V 50 Ring spanners 000 V 5 Ring terminals 77, 8 Ring terminals DIN , 74 Riveting pliers 98 Riveting tool set 98 Rotating head lamp 22 Round pins 72 Round pins 75 Round sleeves 73 Round sleeves 76 Round terminals 76 R page Round terminals 73 Rubber hand guard 206 Rubber towels acc. to VDE 0680/ 75 Rundsteckhülsen 76 S page Safety belts acc. EN Safety classes acc. to EN Safety classes acc. to EN 66 with UV filter 73 Safety fuse grips 72 Safety harness DIN EN Safety Jacket IPS acc. to DIN VDE 0680 part E 74 Safety ropes acc. to A-DIN Safety trousers IPS acc. to DIN VDE 0680 part E 74 Safety-face masks acc. to EN Safety-sets VDE/GS 74 Screw extractor set 229 Screw punches 232 Screw type sockets 4 Screwdriver bits 86, 87 Screwdriver bits Tx 87 Screwdriver bits, red. 86 Screwdriver set with PZ slot profile 36 Screwdriver set 2C 8 Screwdriver set 2C, Tx 8 Screwdrivers 2C, Tx 80 Screwdrivers 2C, Tx with security pin 80 SDS hammer drill bits 228 SDS magnetic holder 87 SDS-hammer drill sets 228 SDS-Nut-hammer drill sets 228 Seal wire 77 Sealing pliers 77 Self adhesive PVC tape 76 Self adhesive sockets 4 Sensor Tool LSA 8 Service set for HAUPA-FIBRE 27 Set of cone drills/hss 230 Set with protective gloves EN Shank for hollow core cutters 233 Shank for hollow core cutters, SDS-Plus 233 Shank for hollow core cutters, SW Short flat nose pliers DIN 5258 VDE 39, 4 Short flat nose pliers DIN ISO 5745 VDE 43 Short round nose pliers DIN 5257 VDE 39, 4 Side cutters 2C, DIN Side cutters DIN 5238 B VDE 39, 4 Side cutters DIN ISO 5749 VDE 43 Side cutting pliers with stripping function 39 Siedge hammer to DIN Single ended spanners 000 V 50 Single ended tool set acc. to VDE 000 V 68 Sledge handles to DIN 535 A 207 Slide Box with DIN end sleeves 66 Slide Box with DIN TWIN end sleeves 66 Slip on bushes 000 V 76 Small tube cutter 2 Socket cup screw DIN 84 Form A 239 Socket set 9 Socket sleeves (female) 72, 75, 77 Socket sleeves (female) with branch 72, 75 Socket sleeves (female) with cable stop 80 Socket sleeves (female) fully-insulated 73, 76 Socket sleeves (male) DIN , 74 Socket sleeves (male) with latching tongue 8 Socket T-wrench 000 V 52, 53, 54, 55, 56 Socket wrenches 2C 82 Socket wrenches set 2C 82 Solder for electronic work acc. to DIN EN Solder in triangular sticks DIN Solder wire according to DIN EN Soldering fluid acc. to DIN 85-F-SW Soldering fluid acc. to DIN 85-F-W Soldering grease for fittings acc. to DIN 85-F-W Soldering irons 202 Soldering paste acc. to DIN 85-F-SW Soldering set 202 Soldering stone 202 Solderless butt connectors DIN 4634 part, type B 88 Solderless terminals for meter connection 86 Spacer bushing 42 Spanners for switch-cabinets 9 Spare blades 5, 7, 2, 20 Spare blades hook form 20 Spare blades straight form 20 Spare cutting head 45 Spare screws 232 Special cable cutter 9, 0 Special fast glue for glass fibre rod 3 mm 27 Special pulling aid 27 S page Special pulling aid 27 Spiral fish tapes 26 Spring washers 240 Steel cable ties, 36 (V4A) 6 Steel cable ties, SS 36 6 Steel fish tapes 26 Steel point scribers 236 Steel stamp, figures (0-9) DIN Steel stamp, letters (A - Z), DIN Step drills /HSS 23 Step drills assortiment/hss 23 Stone chisels, flat oval shank 206 Stone chisels, octagonal shank 206 Stripper Coaxi 7 Stripper for coaxial cable 7, 8 Stripper for UTP-/STP-data cable 8 Stripper standard 7 Stripping pliers 6 Stripping pliers 000 V 44 Stripping tool for medium-high voltage cable 6 Stubby gasifier cross slot screwdrivers 2C, Phillips 82 Stubby gasifier screwdrivers 2C 8 Super wire stripper 9 T page Tackle blocks 78 Tapping screws 239 Taps for armoured steel conduits, metric thread 232 T-connectors, standard series 92 Template for four mandrel pressing 53 Tensioning tools for cable ties 5 Tensioning tools for steel cable ties 6 Test pin 53 T-handle allen keys 000 V 50 T-Handle socket wrenches 000 V 50 The ideal tool assortment 223 Tool belt Basic 29 Tool belt VDE Plus 70 Tool belt VDE 70 Tool belts 29 Tool case HAUPA Lifesaver 000 V 67 Tool case Start up empty 220 Tool case 000 V 53, 55, 60, 6 Tool case 2 component 222 Tool case Start-up VDE 63 Tool case Start-up 22 Tool case Achat 24 Tool case Akkurat 222 Tool case Aktion 220 Tool case Alpha 25 Tool case Basic VDE 63 Tool case Basic 22 Tool case Biber 000 V 60 Tool case Comet 24 Tool case Compact 223 Tool case Delux Plus 000 V 63 Tool case Delux 000 V 62 Tool case Diamant 222 Tool case EXTRA 66 Tool case Favorit - Admiral - Profi 24 Tool case Inspektor 222 Tool case Leopard 64 Tool case Magister 68 Tool case Merkur Plus 223 Tool case Merkur 220 Tool case Novelle 25 Tool case Omega 220 Tool case Panther 223 Tool case Pendant 68 Tool case Phoenix 26 Tool case Power Pack 64 Tool case Profi VDE 64 Tool case Real 000 V 60 Tool case Rotor 000 V 63 Tool case Saphir 25 Tool case Start VDE 62 Tool case Start 25 Tool case Tradition and Fan 24 Tool case Venus Plus 000 V 64 Tool case Venus 68 Tool case trolly 220 Tool case trolly EXTRA 65 Tool case trolly Fly 220 Tool case trolly Master 000 V 65 Tool case trolly Start up 000 V 66 Tool cases Tool bag 27 Tool wallets 24 Torped-level 236 Torque stoppers 000 V 54 Torque wrenches 000 V 52, 54,

67 We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential. T page Travelling safety device DIN 353-2, Type ASK 75 Tube cutter 2 Tubular cable lugs assortment DIN Tubular cable lugs assortment standard 08 Tubular cable lugs for fine-wired, high flexible conductors 94 Tubular cable lugs of pure nickel, ring type 00 Tubular cable lugs, standard series 89 Tubular notched terminals for fine-wired highly flexible 94 Tubular terminals of pure nickel, forke type 00 Tubular terminals, forke type, of pure nickel 00 Tubular terminals, nylon-insulated, standard series 93 Tubular terminals, ring type, of pure nickel 00 Tubular terminals, standard series 89, 90 Tubularcable lugs, nylon-insulated, standard series 93 Tweezers 98 Twin-end sleeves 64 Twin-end sleeves two cables DIN 64 Twin-end sleeves, colour range I (french) 64 TwinSpeed self tapping screw 239 Twist drills DIN 338/HSS type N 226 U page Universal countersunk screw 238 Universal pan head screws 238, 239 Universal stripper 7 Utility knives 20 Utility knives EXTRA with spare blades 2 Utility metal knives 20 V page Vario 000 V replaceable blade set Pozidriv 38 Vario 000V replaceable blade set Phillips 38 Vario nylon bag empty 38 Vario replaceable blade Phillips blade 38 Vario replaceable blade pozidrive blade 38 Vario replaceable blade pozidrive blade/slotted 38 Vario replaceable blade slotted blade 38 Vario replaceable blade torx blade 38 Vario switch cabinet key Double-bit 38 Vario switch cabinet key Square 38 Vario switch cabinet key Triangular 38 VDE 2-component screwdriver with PZ slot profile 36 VDE cross slotted screwdrivers 2C, Phillips 37 VDE cross slotted screwdrivers 2C, Pozidriv 37 VDE electricians screwdrivers 2C 37 VDE screwdrivers set 2C 37 VDE screwdrivers 2C, Tx 37 VDE socket wrenches 2C, DIN VDE socket wrenches set 2C, DIN VDE ratchet cable cutter with cover 000 V 45 VDE security set 000 V 68 VDE/GS - Tool sets 000 V 68 VDE/GS-Voltage testers, VDE-tested 0426/72 86 Voltage tester 86 Voltage tester Basic + 48 Voltage tester Basic 49 Voltage tester Profi LCD plus 47 Voltage tester Profi plus 47 Voltage tester TestPen Basic 49 Voltage tester TestPen 49 Voltage tester VDE/GS 86 Voltage testers VDE/GS 49, 86 W page Warding files DIN Washers 240 Washers DIN Water brushes 200 Water pump pliers 42 Water pump pliers 95 Water pump pliers DIN Water pump pliers VDE 40 Water pump pliers 2C, DIN Water-based lubricants and slip agents 33 Wedges 57 Welded shrink connector 77 Wire brushes 200 Wire cutter 7 Wire rope and cable cutter 000 V 45 Wire stripper / Solar 20 Wire stripper High Strip 9 Wire strippers, sensor special 2 Wire stripping pliers DIN 5232 VDE 4 Wire stripping pliers DIN 5232 VDE 43 Wire stripping pliers DIN 5232 VDE 39 Wire stripping pliers DIN convincing solutions 245

68 Index A A A /S / /PZ /PZ /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN

69 We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential. 0337/EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN S / GELB ROT WEISS /ECO B G R BLAU ROT

70 Index BLAU GRÜN ROT /M /KL /MK /MK /VDE /VDE /MK /MK /VDE / / /

71 We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential /E / /E /E /E /E /E /E /E /E /E /E K /E /E /E /A /B /E /E /E /E /E /E /E /E / /

72 Index /AL /AL /AL /AL /AL /AL /AL /AL / /B /L /AL /AL /AL /AL /AL /AL /AL /AL / /VDE /EN

73 We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /CO /TIN /R /TIN /R /TIN /A /B /A /A /A /A / /K /K /K /K /K / / / /

74 Index /

75 We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

76 Index /DIN / / / / / / / / / / /

77 We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

78 Index /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /EN /V /V /V /V

79 257

80 HAUPA transparent HAUPA-Group Germany (HAUPA Main Office) HAUPA GmbH & Co. KG Königstraße D Remscheid Phone: +49 (0) Fax: +49 (0) Internet: Austria HAUPA Werkzeuge Hans-Udo Paas, Bayernstraße 39 A-507 Wals-Siezenheim Phone: +43 (0662) Fax: +43 (0662) Spain HAUPA Ibérica S. L. C/. Joanot Martorell, 36 E Gava/Barcelona Phone: +34 (902) 3335 Fax: +34 (902) Poland HAUPA Polska Sp.z.o.o ul. Norwida 5500 Trzebnica Phone: +48 (0) Fax: +48 (0) Baltic States UAB HAUPA Baltics P. Smugleviciaus g. 8-30, 083 Vilnius Phone/GSM: Fax: Balkan States HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 7000 Sarajevo Phone/Fax: +387(0) GSM: Romania SC HAUPA SRL Str. G. Enescu, Nr Hunedoara GSM: Fax: mihai.lupu@haupa.com Ukraine HAUPA Ukraine str. Borisa Gmury /2, ap. 26, 0240, Kiev GSM: ( ) Fax: , sergey.skalat@haupa.com Russia HAUPA-RU Ltd Street Sovetskaya 60-A, Pskov Phone: Phone/Fax: Mob.ph.: aleksandr.burcev@haupa.com aleksandr.smertjev@haupa.com Commercial sales staff, Germany Hans-Joachim Gummersbach (HAUPA Main Office) HAUPA GmbH & Co. KG Königstraße 65-69, D Remscheid Phone: +49 (0) Fax: +49 (0) joachim.gummersbach@haupa.com Holger Kratzer (Key-Account-Manager) HAUPA GmbH & Co. KG Königstraße 65-69, D Remscheid Mobil: +49 (0) Fax: +49 (0) holger.kratzer@haupa.com Nordbayern/Saarland/Rheinland-Pfalz/ Süd-Hessen/Baden-Württemberg Rainer Eiselt Industrievertretungen Südstraße 4, 0922 Neukirchen Phone: +49 (0) Fax: +49 (0) info@iv-eiselt.de Sachsen/Sachsen-Anhalt/Thüringen Kittler Elektro-Vertriebs GmbH Industrievertretung Attilastr. 73, 2247 Berlin Phone: +49 (0) Fax: +49 (0) Kittlerindustrie@aol.com Berlin/Brandenburg Hans Fr. R. Petersen KG Vertretungen der Elektroindustrie Nikolaus-Otto-Straße 7, Trittau Phone: +49 (0) Fax: +49 (0) hans_fr.r.petersen@t-online.de Hamburg/Schwleswig-Holstein/ Mecklenburg-Vorpommern Ulrich Tiemann Industrievertretungen e. K. Querstraße 9, Bielefeld Phone: +49 (0) Fax: +49 (0) info@tiemann-bielefeld.de NRW-Ost/Niedersachsen/Hannover Sönnecken GmbH Industrie-Vertretungen Wildermannstr. 8, 444 Dortmund Phone: +49 (0) Fax: +49 (0) soenneckengmbh@t-online.de NRW Ruhrgebiet Hipp-Industrievertretungs-GmbH Zum Engelberg 4, Merzhausen Tel.: +49 (0) Fax: +49 (0) Mobil: +49 (0) info@hipp-gmbh-fr.de Baden-Württemberg Wolfgang Humig Handelsvertretung Rossinistr. 37 b, Ingolstadt Tel.: +49 (0) 84 / Fax: +49 (0) 84 / w.humig@humig.de Südbayern Commercial sales staff, Austria Reinhold Wolfsgruber M. Schurrer & Co GmbH, Bayernstraße 39, A-507 Wals-Siezenheim Phone: 0664/ reinhold.wolfsgruber@schurrer.at Salzburg Andrä Eberharter Pipelife Austria GmbH & Co KG, Bert-Köllensperger-Straße 8a, 6065 Thaur/Gewerbegebiet Phone: 0664/ andrae.eberharter@pipelife.at Vorarlberg, Tirol Gerhard Wutsch M. Schurrer & Co GmbH, Bayernstraße 39, A-507 Wals-Siezenheim Phone: 0664/ gerhard.wutsch@aon.at Steiermark, Kärnten Klaus Gutenbrunner M. Schurrer & Co GmbH, Bayernstraße 39, A-507 Wals-Siezenheim Phone: 0664/ klaus.gutenbrunner@schurrer.at Oberösterreich Thomas M. Steiger M. Schurrer & Co GmbH, Bayernstraße 39, A-507 Wals-Siezenheim Phone: 0664/ thomas.steiger@schurrer.at Wien, NÖ, Burgenland Commercial sales staff, Spain Victor Arondo Serradilla C/. Joanot Martorell, 36 E Gava/Barcelona Phone: +34 (902) 3335, Fax: +34 (902) comercial@haupa.es Commercial sales staff, Poland Andrzej Ryznar Trzebnica, ul. Norwida Phone: Fax: ryznar@haupa.pl Marek Dąbek Trzebnica, ul. Norwida Phone: Fax: Phone: com dabek@haupa.pl Jakub Bałaziński Trzebnica, ul. Norwida Phone: Fax: Phone: com balazinski@haupa.pl Andrzej Bednarczyk Trzebnica, ul. Norwida Phone: Fax: Phone: com bednarczyk@haupa.pl 258

81 HAUPA transparent Foreign representatives Argentina Hoyos y Cia S. R. L. Calle 62 (Cuba) No. 56 (CP 65) 65 San Andres Phone: , Fax: hoyos@hoyos.com.ar Belgium S.A. HUPPERTZ N.V. Rue Golden Hope Straat 35 B, B-620 Drogenbos Phone: 02/ , Fax: 02/ info@huppertz.be Bosnia HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 7000 Sarajevo Phone:/Fax: +387(0) , GSM: goran.hrgovic@haupa.com Bulgaria Retra-Georgiev 2 Vek 8/2, 700 Sofia Tel./Fax: GSM Estonia UAB HAUPA Baltics P. Smugleviciaus g. 8-30, 083 Vilnius Phone:/GSM: , Fax: andrius.krisiunas@haupa.com Finland Spring Electronics Kaivosvoudintie A, 060 VANTAA Puh/Phone: +358 (0) Fax: +358 (0) myynti@springelectronics.fi Greece HAUPA Main Office Germany, Jörg Adam Phone: , Fax: joerg.adam@haupa.com Great Britain HAUPA Main Office Germany Phone: , Fax: info@haupa.com Ireland MCC Controls Industrial Electrical Supplies Robinhood Business Park Robinhood Road, Dublin 22 Phone: , Fax: info@mcc-controls.com Iceland Smith & Norland Nóatúni 4, IS-05 Reykjavik Phone: , Fax: hallan@sminor.is Italy Canalplast Via L.Tolstoi, Limbiate (Milano) Italy Phone: , Fax: info@canalplast.it Croatia HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 7000 Sarajevo Phone:/Fax: +387(0) , GSM: goran.hrgovic@haupa.com Latvia UAB HAUPA Baltics P. Smugleviciaus g. 8-30, 083 Vilnius Phone:/GSM: , Fax: andrius.krisiunas@haupa.com Lithuania UAB HAUPA Baltics P. Smugleviciaus g. 8-30, 083 Vilnius Phone:/GSM: , Fax: andrius.krisiunas@haupa.com Luxembourg MINUSINES S.A. 8, rue Hogenberg, L-022 Luxembourg-Gasperich Phone: , Fax: minlu@pt.lu Macedonia HAUPA S.E.E. d.o.o. (Goran Hrgovic) Miroslava Krleze 24, 7000 Sarajevo Phone:/Fax: +387(0) , GSM: goran.hrgovic@haupa.com Malta HAUPA Main Office Germany, Kerstin Uebbert Phone: , Fax: kerstin.uebbert@haupa.com Netherlands HAUPA Main Office Germany, Kerstin Uebbert Phone: , Fax: kerstin.uebbert@haupa.com Norway VIX AS Postboks 23, 650 Sellebakk Tel.: , Fax: post@vixnordic.com Austria HAUPA Werkzeuge Hans-Udo Paas Bayernstraße 39, A-507 Wals-Siezenheim Phone: , Fax: haupa.austria@haupa.com Poland HAUPA Polska Sp.z.o.o ul. Norwida, 5500 Trzebnica Phone: +48 (0) , Fax: +48 (0) haupa.polska@haupa.com Portugal HAUPA Main Office Germany, Marc Wolter Phone: , Fax: marc.wolter@haupa.com Romania SC HAUPA SRL Hunedoara, Bulevard 848, Nr. 3, Ap. 6 GSM: , Fax: mihai.lupu@haupa.com Russia HAUPA-RU Ltd Street Sovetskaya 60-A, Pskov Phone: Fax: aleksandr.burcev@haupa.com aleksandr.smertjev@haupa.com Sweden VIX AS Postboks 23, 650 Sellebakk Tel.: , Fax: post@vixnordic.com Swiss AXTRON GmbH Hungerbüelstr. 22, CH-8500 Frauenfeld Phone: 004 / , Fax: 004 / info@axtron.ch Serbia HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 7000 Sarajevo Phone:/Fax: +387(0) , GSM: goran.hrgovic@haupa.com Slowakia HAUPA Main Office Germany, Marc Wolter Phone: , Fax: marc.wolter@haupa.com - Slowenia HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 7000 Sarajevo Phone:/Fax: +387(0) , GSM: goran.hrgovic@haupa.com Spain HAUPA Ibérica S. L. C/. Joanot Martorell, 36, E Gava/Barcelona Phone: (902) 3335, Fax: (902) comercial@haupa.es South Africa Surge Technology (Pty) Ltd. 6 Fabriek Street, Strydom Park, Randburg 225 Phone: (0) /5, Fax: (0) info@surgetec.co.zam Czech Republic ELIMA Hradecká 506, Jičín Phone: , Fax: objednavky@elima.cz Turkey Doganer Makine Ltd. Sti. Ikitelli OSB Demirciler Sit. D- Blok No: 275 Kucukcekmece - Istanbul - Turkiye Phone: , Fax: , info@dgr.gen.tr Hungary POLY-NORM 2000 Kft. Bethlen Gábor u. 2-23, H-077 Budapest Phone: +36/46-070, Fax +36/ haupa@polynorm2000.hu Ukraine HAUPA Ukraine str. Borisa Gmury /2, ap. 26, 0240, Kiev GSM: ( ) Fax , sergey.skalat@haupa.com Cyprus Theodoros Georgiou Ltd., Ayios Neophytos Str., CY 6300 Larnaca Phone: , Fax: georgt@cytanet.com.cy Central America INTEK Guatemala, El Salvador, Honduras, Nicaraqua, Costa Rica convincing solutions Germany: HAUPA, Koenigstr , D Remscheid, Phone: +49 (0) , Fax: +49 (0) , sales@haupa.com 259

82 Point of sales HAUPA Shop in Shop Sales System A well-stocked display of tools at the point of sale is the hallmark of every good electrical wholesaler and offers customers the full service they need. Within this complete customer-focussed presentation concept, your clients will find a wide range of HAUPA quality tools and the materials to go with them. It includes tools from the Around the cable, Working under tension and Standard program ranges and offers the user a very high degree of flexibility. 2 3 HAUPA Sales promotion On request, HAUPA also naturally supplies individual cabinets and wall displays fitted out with your own choice of tools. Our different resentation models offer possibilities for your sales area which are both interesting and variable. Cupboards with lockable glass door. Perforated panel displays also available in.00m and.25 m width. Dimensions: 2,20 m x,25 m x 40 cm. (The entire list of items available for display on the panels can be viewed on the internet or by mailing info@haupa.com). 260

83 QR code: This catalogue contains QR codes which ensure more transparent communication of additional information via video or similar media content. HAUPAdemo Germany HAUPA GmbH & Co. KG Königstraße Remscheid Phone: +49 (0) Fax: +49 (0) haupa.com HAUPA-Group DIN EN ISO 900 QZERTIFIKAT... convincing solutions