ÒZNRâÓ Transient/Surge Absorbers, SMD Moded Case Type
|
|
|
- Ashlyn Harvey
- 5 years ago
- Views:
Transcription
1 ÒZNRâÓ Transient/Surge Absorbers, SMD Moded Case Type Type: VF Type: CF Type: SF n Features l Large withstanding surge current capability, compact size l Designed for flow/reflow soldering l Excellent response against high steep surge voltages l Low clamping voltage for better surge protection n Recommended Applications l Protection of communication module (Modems, xdsls, Terminal Adaptes) l Protection of consumer equipment l Protection of industrial equipment l Protection of automobile equipment l Absorption of switching surge from relays n Handling Precautions See Pages 134 to 136 n Explanation of Part Numbers E R Z V F E R Z F M K n Construction 1 ZNR element ZnO etc. 2 Resin mold Epoxy Resin(UL94V-0 approved) 3 Conductive adhesive Silver 4 Electrode Silver 5 Lead terminals Soldered Ni-Fe Alloy n Dimensions in mm (not to scale) Type W L H S E VF1M 6.0± ± ± ± ±0.2 VF1T0 6.0± ± ± ± ±0.2 CF 6.0±0.4 SF 6.2± ± ± ± ±0.2 Rev.02/04
2 n Ratings and Characteristics l Operating Temperature Range: Ð40 to 85 C l Storage Temperature Range: Ð40 to 125 C l Temperature Coefficient of Varistor : 0 to Ð0.05 %/ C Type VF1M Varistor Clamping Allowable at Ip Rated Energy Peak Current (max.) Power (2 ms) (8/20 µs, 2 times) V 1mA (V) ACrms (V) DC (V) V xa (V) Ip (A) (W) (W) (A) *ERZVF1M220 22( 20~ 24) *ERZVF1M270 27( 24~ 30) *ERZVF1M330 33( 30~ 36) *ERZVF1M390 39( 35~ 43) *ERZVF1M470 47( 42~ 52) *ERZVF1M560 56( 50~ 62) *ERZVF1M680 68( 61~ 75) *ERZVF1M820 82( 74~ 90) *ERZVF1M ( 90~110) *ERZVF1M (108~132) *ERZVF1M (135~165) *ERZVF1M (185~225) *ERZVF1M (198~242) *ERZVF1M (216~264) *ERZVF1M (247~303) *ERZVF1M (297~363) *ERZVF1M (324~396) *ERZVF1M (351~429) *ERZVF1M (387~473) *ERZVF1M (423~517) Packaging Style Code: Ò1Ó for bulk, Ò2Ó for embossed taping Type VF1T Varistor Clamping Allowable at Ip Rated Energy Peak Current (max.) Power (2 ms) (8/20 µs, 2 times) V 1mA (V) ACrms (V) DC (V) V xa (V) Ip (A) (W) (W) (A) ERZVF1T ( 74~ 90) ERZVF1T ( 90~110) ERZVF1T (135~165) ERZVF1T (216~264) ERZVF1T (247~303) Packaging Style Code: Ò1Ó for bulk, Ò2Ó for embossed taping
3 n Ratings and Characteristics l Operating Temperature Range: Ð40 to 85 C l Storage Temperature Range: Ð40 to 125 C l Temperature Coefficient of Varistor : 0 to Ð0.05 %/ C Type CF Varistor Clamping Allowable at Ip Rated Energy Peak Current (max.) Power (2 ms) (8/20 µs, 2 times) V0.1 ma (V) ACrms (V) DC (V) Vx A (V) Ip (A) (W) (J) (A) ERZCF1MK ( 20Ð 24) ERZCF1MK ( 24Ð 30) ERZCF1MK ( 30Ð 36) ERZCF1MK ( 35Ð 43) ERZCF1MK ( 42Ð 52) ERZCF1MK ( 50Ð 62) ERZCF1MK ( 61Ð 75) ERZCF1MK ( 74Ð 90) ERZCF1MK ( 90Ð110) ERZCF1MK (108Ð132) ERZCF1MK (135Ð165) ERZCF1MK (185Ð225) ERZCF1MK (198Ð242) ERZCF1MK (216Ð264) ERZCF1MK (247Ð303) ERZCF1MK (324Ð396) ERZCF1MK (351Ð429) ERZCF1MK (387Ð473) ERZCF1MK (423Ð517) Packaging Style Code: Ò1Ó for bulk, Ò2Ó for embossed taping Type SF Varistor Clamping Allowable at Ip Rated Energy Peak Current (max.) Power (2 ms) (8/20 µs, 2 times) V1 ma (V) ACrms (V) DC (V) Vx A (V) Ip (A) (W) (J) (A) ERZSF1MK ( 20Ð 25) ERZSF1MK ( 24Ð 30) ERZSF1MK ( 30Ð 36) ERZSF1MK ( 35Ð 43) ERZSF1MK ( 42Ð 52) ERZSF1MK ( 50Ð 62) ERZSF1MK ( 61Ð 75) ERZSF1MK ( 74Ð 90) ERZSF1MK ( 90Ð110) ERZSF1MK (108Ð132) ERZSF1MK (135Ð165) ERZSF1MK (185Ð225) ERZSF1MK (198Ð242) ERZSF1MK (216Ð264) ERZSF1MK (247Ð303) ERZSF1MK (324Ð396) ERZSF1MK (351Ð429) ERZSF1MK (387Ð473) ERZSF1MK (423Ð517) Packaging Style Code: Ò1Ó for bulk, Ò2Ó for embossed taping
4 n Typical Characteristics n vs. Current n ERZVF1(2)M220 to ERZVF1(2)M680 n Impulse n ERZVF1(2)M820 to ERZVF1(2)M471 ERZVF1(2)M820 to ERZVF1(2)M271 ERZVF1(2)M331 to ERZVF1(2)M n ERZVF1(2)T820 to ERZVF1(2)T
5 n Typical Characteristics n vs. Current n ERZCF1 (2) MK220 to ERZCF1 (2) MK680 n Impulse n ERZCF1 (2) MK820 to ERZCF1 (2) MK471
6 n Typical Characteristics n vs. Current n ERZSF1 (2) MK220 to ERZSF1 (2) MK680 n Impulse n ERZSF1 (2) MK820 to ERZSF1 (2) MK471
7 n Marking Contents 1 Trade Mark Trade Mark 2 Product Name ZNR 3 Type 4 VF1M Type:VFM, VF1T Type:VFT CF Type:FK, SF Type:SF Abbreviation of The first two digits are significant figures and the third one denotes the number of zeros following. 5 Date Code Left(Year): 2002:B, 2003:C, 2004:D, 2005:E, 2006:F Right(Month): Jan. to Sep.:1 to 9, Oct.:0, Nov.:N, Dec.:D n Packaging Specifications l Packing Quantity Size Code Style Embossed taping Bulk ÒVF1MÓ, ÒVF1TÓ, ÒCFÓ, ÒSFÓ 2000 pcs./reel 200 pcs./bag l Reel l Embossed Taping Dimensions A B C D E (mm) 382 max. 50 min. 13.0± ± ±0.5 Dimensions W T t r +2.0 (mm) max. 2.5± Dimensions A B W F E P1 (mm) 6.8± max. 16.0± ± ± ±0.1 Dimensions P2 P0 fd0 t1 t2 (mm) 2.0± ± max. 6.5 max. -0
8 n Performance Characteristics Characteristics Test Methods Specifications Standard Test Condition Electrical measurements (initial/after tests) shall be conducted at temperature of 5 to 35 C, relative humidity maximum of 85 % ÑÑ Varistor Allowable Clamping Rated Power Energy Peak Current Temperature Coefficient of Varistor The voltage between two terminals with the specified measuring current CmA DC applied is called Vc or VCmA. The measurement shall be made as fast as possible to avoid heating effects. The recommended maximum sinusoidal wave voltage (rms) or the maximum DC voltage that can be applied continuously. The maximum voltage between two terminals with the specified impulse current (8/20 µs). The maximum power that can be applied within the specified ambient temperature. energy at less than ±10 % of varistor voltage change when the standard impulse (2 ms) is applied one time. current at less than ±10 % of varistor voltage change when impulse current (8/20 µs) is applied two times continuously with the interval of 5 minutes. VCmA at 85 C Ð VCmA at 25 C 1 100(%/ C) VCmA at 25 C 60 To meet the specified value. 0 to Ð0.05 %/ C Impulse Life (I) Impulse Life (II) The change of Vc shall be measured after the specified impulse is applied times continuously with the interval of 10 seconds at room temperature. Type Part Number Waveform Current ERZVF1M220 to ERZVF1M680 8/20 µs 8 A VF1M ERZVF1M820 to ERZVF1M271 8/20 µs 40 A ERZVF1M331 to ERZVF1M471 8/20 µs 30 A VF1T1 ERZVF1T820 to ERZVF1T271 8/20 µs 20 A CF ERZCF 1MK220 to ERZCF 1MK680 2 ms 0.5 A ERZCF 1MK820 to ERZCF 1MK471 8/20 µs 20 A ERZSF 1MK220 to ERZSF 1MK680 8/20 µs 18 A SF ERZSF 1MK820 to ERZSF 1MK271 8/20 µs 50 A ERZSF 1MK331 to ERZSF 1MK471 8/20 µs 40 A The change of Vc shall be measured after the specified impulse is applied times continuously with the interval of 10 seconds at room temperature. Type Part Number Waveform Current ERZVF1M220 to ERZVF1M680 8/20 µs 5 A VF1M ERZVF1M820 to ERZVF1M271 8/20 µs 25 A ERZVF1M331 to ERZVF1M471 8/20 µs 20 A VF1T1 ERZVF1T820 to ERZVF1T271 8/20 µs 14 A CF ERZCF 1MK220 to ERZCF 1MK680 2 ms 0.45 A ERZCF 1MK820 to ERZCF 1MK471 8/20 µs 14 A ERZSF 1MK220 to ERZSF 1MK680 8/20 µs 12 A SF ERZSF 1MK820 to ERZSF 1MK271 8/20 µs 35 A ERZSF 1MK331 to ERZSF 1MK471 8/20 µs 28 A ÆVCmA/VCmA < ±10 % ÆVCmA/VCmA < ±10 %
Reference Guide to Standard Products Part No. Applicable Standards Varistor at ma Allowable Clamping at 8/20μs Peak Current at 8/20μs(A) Recommended A
ZNR Transient/Surge Absorbers Type: D Series: E ZNR Transient/Surge Absorber, Series E, Type D features large surge current and energy handling capability for absorbing transient overvoltage in a compact
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 1800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
G N R 2 0 D K * * *
VARISTORS Catalog number system G N R 2 0 D 2 0 1 K * * * Product Series Element Size Type Nominal at 1mA DC Tolerance Suffixes GNR: General Nonlinear Resistor 05 :ψ5mm 07 :ψ7mm 10 :ψ10mm 14 :ψ14mm 20
Pan Overseas Zinc Oxide Varistors
PVR - ZINC OXIDE VARISTORS Introduction Zinc Oxide Varistor is a non-linear resistance device, whose voltage and current relationship vary according to the Law of Powers. When high transients or surges
Electrical Specifications 5mm. Ic (A) (V)
Features: AC operating voltage from 11V to 1000V DC operating voltage from 14V to 1465V Peak current up to 6500 amps Energy handling up to 625J UL1449 certified file no. E476752 Operating temperature range
NFC. (Varistor Type NFC)
NFC (Varistor Type NFC) Type NFC Varistors are made of semiconductor ceramic materials composed mainly of zinc oxide. They have nonlinear resistance that changes as a function of applied voltage. It has
Metal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Halogen-free series are available 3. Body size: Ф7mm ~ Ф 20mm 4. Wide operating voltage range: 5Vac ~ 680Vac 5. High surge current rating up to 3KA 6. High energy rating up
MVR G. Size: Unit:mm. Type Length(L) Width(W) High(H) Termination(L1) ± ± (max) 0.40±
1 Electrical Characteristics 1.1 Technical Data Symbol Value Unit Maximum allowable continuous AC voltage*1 V RMS 50.0 V Maximum allowable continuous DC voltage V DC 65.0 V Varistor voltage Measured*2
Metal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Halogen-free series are available 3. Body size: Ф7mm ~ Ф 20mm 4. Wide operating voltage range: 5Vac ~ 680Vac 5. High surge current rating up to 3KA 6. High energy rating up
Introduction fo FPV Series Multilayer Chip Varistor
Introduction fo FPV Series Multilayer Chip Multilayer Chip s (MLV) are Transient Voltage Suppressors (TVS) which manufactured from semiconducting ceramics by the highly advanced multilayer formation technologies,
Metal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. Wide continuous voltage range: 30Vac ~ 465 Vac 4. Operating temperature range: -40 C ~ +25 C 5. Storage temperature range: -40 C ~
TABLE of contents. Metal Oxide Varistor (MOV) Varistors-5D Series Varistors-7D Series Varistors-10D Series... 5
TABLE of contents Subject Page Metal Oxide Varistor (MOV)..................................................... 1 Varistors-5D Series............................................................ 3 Varistors-7D
Metal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. ide continuous voltage range: 30Vac ~ 465Vac 4. Operating temperature range: -40 C ~ +25 C Storage temperature range: -40 C ~ +50 C
Metal Oxide Varistor:TVR Series
Features. Body size: Ф5 ~ Ф20mm 2. Wide operating voltage range:vac ~ 00Vac 3. Operating temperature range:-40 ~ +85 C 4. Agency recognition: UL 449 3 rd /UL 44/cUL/VDE /CSA/CQC 5. TVR48~42 and TVR208~202
Metal Oxide Varistor:TVM-B Series
Features 1. RoHS compliant 2. High surge suppress capability 3. EIA size 0402 ~ 2220 4. Operating voltage: 5.5 ~ 85 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
VE09 M K. AC Operating Voltage (EIA coding) VE. Nominal Voltage at 1 ma dc (EIA coding) VF
Ordering Code HOW TO ORDER VE09 M 0 0251 K Type VE 07 VE 09 VE 13 VE 17 VE 24 VF 05 VF 07 VF 10 VF 14 VF 20 VN 32 VB 32 Series M: Varistors for general applications P: Varistors for heavy duty applications
ORDER INFORMATION L-KLS6-MVR G
istors Varistor s L-KLS6-MVR3220-431G 3220 Varistor s,430v,39pf 1 Electrical Characteristics 1.1 Technical Data Symbol Value Unit Maximum allowable continuous AC voltage*1 V RMS 275.0 V Maximum allowable
METAL OXIDE VARISTOR (MOV)
METAL OXIDE VARISTOR (MOV) How to Order SR 241 K 10 D S 40 X Type code Tolerance Disk Size Code Disk Type Lead Type or Taping Code Lead Cutting Special Request SR: Walsin ( volt) (From 180 to 112) Two
MULTILAYER CHIP VARISTORS
Feature Varistor Voltage from5v to 100V Fast response time Low leakage current High surge current ability Bidirectional clamping, high energy Wide Operating temperature range from -55-125 Suitable for
JNR ZINC OXIDE VARISTORS FEATURES APPLICATIONS PARAMENTERS DEFINITION HOW TO ORDER
JNR ZINC OXIDE VARISTORS Zinc oxide varistor is a voltage dependent resistor with symmetrical voltage -current characteristics that is designed to protect all kinds of electronic devices or elements from
(MV) MUTIAYER CHIP VARISTOR MV ZINC OXIDE VARISTOR. Fenghua (HK) Electronics Ltd.
FENGHUA Fenghua (HK) Electronics Ltd. Unit 207, Fu Hang Industrial Building, No.1, Hok Yuen Street East, Hung Hom, Hong Kong Tel: 852-2408-7636 Fax: 852-2408-8859 Email: info@fenghua.com URL: FEATURES
Specification for Release
@@FRM 1@@ Order Code: A Dimensions: Size: 1206 A 3.2 ± 0.2 mm B 1.6 ± 0.2 mm C 1.5 mm D 0.5 ± 0.3 mm B Electrical Properties: Properties Test Conditions alue Unit Tol.. AC 4.2 a [mm] Operating oltage RMS
Surface Mount Multilayer Varistors
ESD Protection (ES) Series Fast Response < 0.5 ns Low Working 5 V Low Capacitance Low Leakage Current < 1 μa Low Application Fields: Cell Phones Digital Cameras PDAs MP3 Notebooks Working (Max) (Max) Leakage
SINOCHIP(NANJING) ELECTRONIC CO.,LTD Catalog. Ⅳ Varistor Type MYL5 28
2011-09-01 ROHS Catalog Ⅰ Varistor Type MYG 3 Ⅱ Varistor Type MYL1) 18 Ⅲ Varistor Type MYL3 25 Ⅳ Varistor Type MYL5 28 Ⅴ Varistor Type SPD 33 1 2 ⅠVaristor Type MYG Type MYG Varistors are made of semiconductor
varistor plus catalog
varistor plus catalog Single Layer Varistor Technology Surface Mount & Leaded Products SEI electronics inc. P.O.Box 58789 Raleigh,NC 27658-8789 Tel. 1-888-sei-sei-sei Fax. 919-850-9504 www.seielect.com
Metal Oxide Varistor:TVT Type
Features. RoHS compliant 2. 2 leaded or 3 leaded thermally protected metal oxide varistor, Three-leaded version available for indication purposes. 3. Body size : 4, 20, 22, 25, 32 and 34 mm in diameter
Metal Oxide Varistor Thermally Protected Type. TPV Series FEATURE PART NUMBERING SYSTEM LEAD CONFIGURATION SURGE CURRENT STANDARD WAVEFORM
FEATURE Operating Temperature: -55 C ~ +85 C Varistor : 200V ~ 1200V Two or Three terminal thermally protected Metal Oxide Varistor. High peak Surge current rating up to 10KA Standard lead form and spacing
XKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoHS and REH DIMENSION L: 16mm min SIZE D MAX H MAX d+/-0.05 E
Ancol. Ancol Electronics Co.,Ltd Non-Linear Resistor (mm) Element Diameter Packaging K ±10% Varistor Voltage
FEATURES: Widely voltage range 1 8v-1.8kv Fast response to the rapidly increase Voltage (Mu sec.) Excellent non-linearity voltage Symmetric V-I characteristics Great withstanding surge current (200 0A/c
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes............................................................ 1 General Information...........................................................................
Sensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
Spezifikation für Freigabe / specification for release
Artikelnummer / part number : 820 553 811 Datum / Date : 2006-06-28 ROHS Compliant A Elektrische Eigenschaften / electrical properties : TECHNICAL DATA Part Number Breakdown Working Clamping Current Peak
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes... 1 General Information... 2 P4KE Series 400 Watt... 8 SA Series 500 Watt... 12 P6KE Series 600 Watt... 18 1.5KE
Spezifikation für Freigabe / specification for release
Artikelnummer / part number : 82550200 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5
E CQC CQC CQC CQC CQC D-Seires. 11 to to to
Description CNR D/V/P/H/N series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
RELIABILITY TEST P10 PRODUCT SERIES P11 ~ P16 P17 ~ P22 P23 P24 P25 P26 V-I CURVE P27 ~ P31 SURGE LIFE TIME RATINGS P32 ~ P36 OUTLINE DIMENSION
Page 1 INDEX P1 VARISTOR OVERVIEW P2 INFORMATION REQUEST FORM P3 FEATURES P4 VARISTOR V-I CHARACTERISTICS P5 HOW TO SELECT A VARISTOR P6 NOTICE FOR APPLICATION P7 ~ P8 TERMINOLOGY & GENERAL P9 CHARACTERISTICS
Spezifikation für Freigabe / specification for release
Datum / Date : 2007-01-24 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SISE W L T a 402 0.5 1.0 0.6 0.25 603 0.8 1.6 0.9 0.3 805 1.25 2.0 1.2 0.3 1206 1.6 3.2 1.5 0.5 1210 2.5 3.2 1.5 0.5
Glass Encapsulated SMD Varistor MLV
(VJ12, 2, 13, 14, 15, 32) Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX s Professional Multilayer Varistors include 3 series of glass coated products as listed
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
Features. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A
AUML Varistor Series RoHS Description The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most
P-Series 11 to to to to to to to 1100 >1000 <25
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
FUJI Ceramic Surge Absorbers
Quality is our message FUJI Ceramic Surge Absorbers ENF series 0 to 680V (Varistor voltage) Features Flame-resistant Suppress combustion and smoking after a malfunction caused by larger surge than the
VZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465.
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
WF25S WF20S WF12S ±5% 20% Power Surge Chip Resistors Size 2512, 2010, Customer : Approval No : Issue Date : Customer Approval :
WF25S WF20S WF12S ±5% 5%, ±10 10%, ±20 20% Power Surge Chip Resistors Size 2512, 2010, 1206 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF25S WF20S WF12S Ver.4 Sep.-2008 FEATURE
PCB Relay. Single-side stable EN60950/EN41003 PCB terminal G6S-2 G6SU-2 G6SK-2 G6S-2-Y Surface mounting. stable
PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
COMPACT FLAT SIZE FOR AUTOMOTIVE
PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal
1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
NTC Thermistor:TTC05 Series
Features 1. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating temperature range: -30 ~+125 6. Wide resistance range 7. Cost effective
COMPACT FLAT SIZE FOR AUTOMOTIVE
PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal
Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Specification YGHR411-H CUSTOMER SUPPLIER. Rev.01 December Document No. : SSC-QP (Rev.00)
Specification YGHR411-H CUSTOMER Checked by Approved by SUPPLIER Drawn by Approved by CONTENTS 1. Description 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Electro-Optical Characteristic
Spezifikation für Freigabe / specification for release
Datum / Date : 2010-09-15 ROHS Compliant A Elektrische Eigenschaften / electrical properties : TECHNICAL DATA Part Number Breakdown Working Clamping Current Peak Current Tolerance Voltage Voltage Voltage
WK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805
WK25S WK20S WK10S WK12S WK08S ±5%, ±10%, ±20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WKxxS_V02
WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice.
High Voltage PolyTerm Ceramic Capacitors
High PolyTerm Ceramic Capacitors Standard MLCCs are prone to cracking due to mishandling, depanelization, and board flexing. In response to customer requests for higher resistance to mechanical stress,
55 Series - Miniature General Purpose Relays 5-10 A
Series - Miniature General Purpose Relays -0 A - Plug-in or P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on and CO relays types - Sockets and accessories:
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WFxxHB ±0.1% Ver.13 Sep.-2008 FEATURE 1.
AUML Varistor Series. Surface Mount Varistors
The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from
WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
WF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :
SPECIFICATION OF SURGE 5% CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF12SR360JTL Surge 5% chip resistors Size 1206 Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION OF SURGE
SPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
G6K. Surface Mounting Relay with the World s Smallest Mounting Area. Application Examples. Model Number Legend. Ordering Information
with the World s Smallest Mounting Area Subminiature model as small as.2 (H). (W) (L) mm is ideal for high-density mounting ((U)-2F(-Y)). Low profile of.2 mm improves mounting efficiency ((U)-2F(-Y)).
Zinc Oxide Varistors Part Numbering
Zinc Oxide Varistors Part Numbering HOW TO ORDER BY PART NUMBER JVR 07 N 241 K 6 5 Y AW Joyin ZnO Varistor Element Size (disc dia.) Lead Length / Packing Method 05 :Dia. 5mm 50 : 5±0.5mm (bulk) for shearing
Varistor Products Radial Lead Varistors > ZA Series
Description The of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
WR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
Ordering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays
Low-profile Relay with Various Models Low profile:.7 mm in height Clearance and creepage distance Between coil and contacts: 8 mm/8 mm Between contacts of the same polarity: 3 mm/4 mm Models with AC coil
CPTC Thermistor:Dip Type PPL Series
Features 1. RoHS compliant 2. Radial leaded devices 3. Wide resistance range in telecom area from 7 to 50Ω 4. Agency recognition: UL/cUL/TUV 5. Compliant with ITU-T standards 6. Operating temperature range:0
Metal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
China - Germany - Korea - Singapore - United States - smc-diodes.com
TPK30KPXX TVS Rectifier Features SPD-4 Low profile surface mount Fast response Suppresses transients up to 30kW @ 10/1000µs and 200kW @ 8/20µs This is a Pb Free Device Open top for heat dissipation and
WR04X ±1%, ±5% General purpose chip resistors Size 0402
WR04X ±1%, ±5% General purpose chip resistors Size 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR04X Version 14 Jul.-2007 FEATURE 1. Small size and light weight 2. High reliability
WF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WFxxHD ±0.5% Ver.13 March.-2010 FEATURE
Gas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
Design number. RC filtering circuit for USB interface
hip R Networks hip R Networks Type: EZDLU n Features. Smallest SMD R/ filter for USB interface l Including 2 circuits of p type R/ filter in a chip (hip size:3.2 mm.6 mm ) l Space saving and low placing
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Anti-Sulfur SMD chip resistor ST Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4
Teccor brand Thyristors Standard Bidirectional SIDACs
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
Metal Oxide Varistor:TVA Series
Features 1. RoHS compliant 2. Body size: Ф25mm ~ Ф 60mm 3. Wide operating voltage range 4. Excellent clamping ratio 5. Low leakage current 6. Large withstanding surge current capability 7. Bidirectional
n For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
Time scale: from 0.05 s to 100 h Multi-function Plug-in for use with 96 series sockets. Relay + socket. Wiring diagram (without control signal)
86 Timer modules 86 Timer modules for use in conjunction with relay & socket. 86.00T - Multi-function & multi-voltage timer module 86.30T - Bi-function & multi-voltage timer module Complies with EN 45545-2:2013
VAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
46 and 56 Series - Relays for railway applications 8-12 A. Features 46.52T 56.32T 56.34T
46 and 56 Series - Relays for railway applications 8-12 A Features 46.52T 56.32T 56.34T Plug-in power relays: 8 A, 2 pole 12 A, 2 and 4 pole DC coils with extended range Complies with UNI CEI 11170-3 (protection
MIDDLE LOAD RELAY FOR SMART J/B
MIDDLE LOAD RELAY FOR SMART J/B CN-M RELAYS (ACNM) New Compliance with RoHS Directive FEATURES. Best space savings in its class.. Compact and high-capacity A load switching.. Full line up (High heat-resistant
S J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
NTC Thermistor:TTC05 Series
Features 1. RoHS compliant & Halogen-free series are available 2. Body size Ф5mm 3. Radial lead resin coated 4. -30 ~ +125 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency
SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
High Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
Applicable Terminal Relay Rated voltage Model G6D-F4B 12 VDC G6D-1A (see note) 24 VDC 12 VDC G6D-1A-AP (see note) 24 VDC G3DZ-F4B 12 VDC G3DZ-2R6PL
Terminal Relay Easy-to-use, Space-saving Terminal Relay with Four-point Output Almost the same size as PYF Socket: 31 x 35 x 68 mm (W x H x D) Each terminal circuit (with coil or contact) is independent
Thin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
Application. Features. Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers
Thin Film Chip Resistor TR Series Application Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers Features Tight tolerance from ±0.01%,±0.1%,
Ceramic PTC Thermistor: PPL Series
Features 1. RoHS compliant 2. Radial leaded devices 3. Wide resistance range in telecom area from 7 to 50Ω 4. Compliant with ITU-T standards 5. Operating temperature range: 0 ~ +60 C (V=Vmax) -25 ~+125
SFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V