Reference Guide to Standard Products Part No. Applicable Standards Varistor at ma Allowable Clamping at 8/20μs Peak Current at 8/20μs(A) Recommended A
|
|
|
- Emily Thompson
- 5 years ago
- Views:
Transcription
1 ZNR Transient/Surge Absorbers Type: D Series: E ZNR Transient/Surge Absorber, Series E, Type D features large surge current and energy handling capability for absorbing transient overvoltage in a compact size. eatures arge withstanding surge current capability in compact sizes arge Energy Handling Capability absorbing transient overvoltages in compact sizes Wide range of varistor voltages The standard products shown below have received U and VDE standards Varistor voltage V over : U, VDE RoHS compliant Recommended Applications Transistor, diode, IC, thyristor or triac semiconductor protection Surge protection in consumer electronic equipment Surge protection in communication, measuring or controller electronics Surge protection in electronic home appliances, gas or petroleum appliances Applicable Standards U449 Ed.3 VDE IEC605-, -2, -2-2, IEC Ed.2 Annex.Q Type designation(u), Style reference(vde) Are not registered by product Part No.. (Refer to pages 2 and 2 for the details) Handling Precautions Please see Related Information (Pages 5 to 7) Minimum Quantity / Packing Unit Please see Related Information (Page 8) Explanation of Part Numbers Product Code Design No. E08 E E4 Series Series E8 Series E Series E4 Symbol A ) B 2) E 2) ead Configuration ead Configuration Straight ead Crimped ead Straight ead Crimped ead ) Cut Type, Series E8, Series E 2) Series E8, Series E Packaging Bulk Bulk Taped Taped Nominal Varistor The first two digits are significant figures and the third one denotes the number of zeros following. 02 eb. 203
2 Reference Guide to Standard Products Part No. Applicable Standards Varistor at ma Allowable Clamping at 8/20μs Peak Current at 8/20μs(A) Recommended Applications Standard Registration No. Approvals (V) ACrms (V) DC (V) max.(v) Ip (A) time 2 times ERZE08A20 E ERZEA20 E (85 to 225) ERZE4A20 E AC V ine ine ERZE08A22 E Applications 220 ERZEA22 E (98 to 242) ERZE4A22 E ERZE08A24 E ERZEA24 E (26 to 264) ERZE4A24 E AC V to 20 V, ine ine ERZE08A27 E Applications 270 ERZEA27 E (247 to 303) ERZE4A27 E ERZE08A33 E ERZEA33 E (297 to 363) ERZE4A33 E AC V to 20 V, ine ine ERZE08A36 E Applications 360 ERZEA36 E (324 to 396) Telephone ine Applications, ERZE4A36 E (or DC 250 V Insulation ERZE08A39 E Resistance Test) 390 ERZEA39 E (35 to 429) ERZE4A39 E ERZE08A43 E ERZEA43 E (387 to 473) ERZE4A43 E443 AC V to 220 V, ine ine and ERZE08A47 E ine Ground Applications ERZEA47 E (423 to 57) ERZE4A47 E ERZE08A5 E ERZEA5 E (459 to 56) ERZE4A5 E ERZE08A56 E ERZEA56 E (504 to 66) ERZE4A56 E456 AC V to 240 V, ine ine and ERZE08A62 E ine Ground Applications ERZEA62 E (558 to 682) ERZE4A62 E ERZE08A68 E ERZEA68 E (62 to 748) ERZE4A68 E ERZE08A75 E ERZEA75 E (675 to 825) AC 380 V, ine ine and ERZE4A75 E ine Ground Applications ERZEA82 E (or DC V Insulating Test) ERZE4A82 E482 (738 to 902) ERZEA9 E AC 45 V, ine ine and ine Ground Applications ERZE4A9 E49 (89 to ) 7 6 (or DC V Insulating Test) ERZEA02 E ( to ) AC 480 V, ine ine and ERZE4A02 E ine Ground Applications ERZEA2 E (or DC V Insulating Test) ERZE4A2 E42 (990 to 20) : U449 Ed.3, : U449 Type3 (or Code-Connected and Direct plug-in), : U449 Type2 (or Permanently Connected), : VDE (IEC605-, -2, -2-2), : VDE (IEC Ed.2 Annex.Q) Approval number (ile No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No eb. 203
3 Series E8 Ratings and Characteristics Operating Temperature Range : 40 to 85 C Storage Temperature Range : 40 to 25 C Part No. Varistor Ip Measuring current of clamping voltage : 25 A Allowable Clamping (max.) Ip Rated Power Energy Peak Current Capacitance (8/20 μs) (max.) (0/ μs) (2 ms) time 2 times V ma (V) ACrms (V) DC (V) (V) (W) (J) (J) (A) (A) at khz (p) ERZE08A20 (85 to 225) ERZE08A22 220(98 to 242) ERZE08A24 240(26 to 264) ERZE08A27 270(247 to 303) ERZE08A33 330(297 to 363) ERZE08A36 360(324 to 396) ERZE08A39 390(35 to 429) ERZE08A43 430(387 to 473) ERZE08A47 470(423 to 57) ERZE08A5 50(459 to 56) ERZE08A56 560(504 to 66) ERZE08A62 620(558 to 682) ERZE08A68 680(62 to 748) ERZE08A75 750(675 to 825) Dimensions in mm (not to scale) Part No. D max. T max. ±.0 A max. ±.0 ERZE08A ERZE08A D T ERZE08A ERZE08A A ERZE08A ERZE08A ERZE08A ERZE08A ERZE08A f min. ERZE08A ERZE08A ERZE08A ERZE08A ERZE08A Aug. 202
4 Typical Characteristics vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZE08A20 to ERZE08A5 (V) ERZE08A20 to ERZE08A5 0 up to 0 times : 2 min. interval up to 0 6 times : 0 sec. interval Surge 0 Times 0 2 Times 0 3 Times 0 4 Times 0 5 Times 2 Times Time to 0-3 A: Direct Current 0 - to 0 4 A: 8/20 μs Times 20 0 ERZE08A56 to ERZE08A75 ERZE08A56 to ERZE08A up to 0 times : 2 min. interval up to 0 6 times : 0 sec. interval Times 2 Times Time (V) Surge 0 2 Times 0 3 Times 0 4 Times 0 5 Times Times to 0-3 A: Direct Current 0 - to 0 4 A: 8/20 μs Aug. 202
5 Series E Ratings and Characteristics Operating Temperature Range : 40 to 85 C Storage Temperature Range : 40 to 25 C Part No. Varistor Ip Measuring current of clamping voltage : 50 A Allowable Clamping (max.) Ip Rated Power Energy Peak Current Capacitance (8/20 μs) (max.) (0/ μs) (2 ms) time 2 times V ma (V) ACrms (V) DC (V) (V) (W) (J) (J) (A) (A) at khz (p) ERZEA20 (85 to 225) ERZEA22 220(98 to 242) ERZEA24 240(26 to 264) ERZEA27 270(247 to 303) ERZEA33 330(297 to 363) ERZEA36 360(324 to 396) ERZEA39 390(35 to 429) ERZEA43 430(387 to 473) ERZEA47 470(423 to 57) ERZEA5 50(459 to 56) ERZEA56 560(504 to 66) ERZEA62 620(558 to 682) ERZEA68 680(62 to 748) ERZEA75 750(675 to 825) ERZEA82 820(738 to 902) ERZEA9 90(89 to ) ERZEA02 ( to ) ERZEA2 (990 to 20) Dimensions in mm (not to scale) Part No. D max. T max. ±.0 A max. ±.0 ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA ERZEA f 0.8 D A 20.0 min. T 00 5 Aug. 202
6 Typical Characteristics vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZEA20 to ERZEA5 (V) ERZEA20 to ERZEA5 0 up to 0 times : 2 min. interval up to 0 6 times : 0 sec. interval Surge 0 3 Times 0 4 Times 0 5 Times 0 6 Times 2 Time 0 Times 0 2 Times Time to 0-3 A: Direct Current to 0 4 A: 8/20 μs ERZEA56 to ERZEA2 ERZEA56 to ERZEA up to 0 times : 2 min. interval up to 0 6 times : 0 sec. interval (V) Surge 0 3 Times 0 4 Times 0 6 Times Time 2 Times 0 Times 0 2 Times to 0-3 A: Direct Current 0 - to 0 4 A: 8/20 μs Aug. 202
7 Series E4 Ratings and Characteristics Operating Temperature Range : 40 to 85 C Storage Temperature Range : 40 to 25 C Part No. Varistor Allowable Clamping (max.) Ip Rated Power Energy Peak Current Capacitance (8/20 μs) (max.) (0/ μs) (2 ms) time 2 times V ma (V) ACrms (V) DC (V) (V) (W) (J) (J) (A) (A) at khz (p) ERZE4A20 (85 to 225) ERZE4A22 220(98 to 242) ERZE4A24 240(26 to 264) ERZE4A27 270(247 to 303) ERZE4A33 330(297 to 363) ERZE4A36 360(324 to 396) ERZE4A39 390(35 to 429) ERZE4A43 430(387 to 473) ERZE4A47 470(423 to 57) ERZE4A5 50(459 to 56) ERZE4A56 560(504 to 66) ERZE4A62 620(558 to 682) ERZE4A68 680(62 to 748) ERZE4A75 750(675 to 825) ERZE4A82 820(738 to 902) ERZE4A9 90(89 to ) ERZE4A02 ( to ) ERZE4A2 (990 to 20) Ip Measuring current of clamping voltage : A Dimensions in mm (not to scale) Part No. D max. T max. ±.0 A max. ±.0 ERZE4A ERZE4A ERZE4A ERZE4A ERZE4A D T ERZE4A ERZE4A A ERZE4A ERZE4A ERZE4A ERZE4A min. ERZE4A f.0 ERZE4A ERZE4A ERZE4A ERZE4A ERZE4A ERZE4A eb
8 Typical Characteristics vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZE4A20 to ERZE4A5 (V) ERZE4A20 to ERZE4A5 0 Surge up to 0 times : 2 min. interval up to 0 6 times : 0 sec. interval 2 Time 0 Times 0 2 Times 0 3 Times 0 4 Times 0 5 Times 0 6 Times Time to 0-3 A: Direct Current 0 - to 0 4 A: 8/20 μs ERZE4A56 to ERZE4A2 ERZE4A56 to ERZE4A up to 0 times : 2 min. interval up to 0 6 times : 0 sec. interval 2 Time Time (V) Surge 0 Times 0 2 Times 0 3 Times 0 4 Times 0 5 Times 0 6 Times to 0-3 A: Direct Current 0 - to 0 4 A: 8/20 μs eb. 203
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 1800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
ÒZNRâÓ Transient/Surge Absorbers, SMD Moded Case Type
ÒZNRâÓ Transient/Surge Absorbers, SMD Moded Case Type Type: VF Type: CF Type: SF n Features l Large withstanding surge current capability, compact size l Designed for flow/reflow soldering l Excellent
Pan Overseas Zinc Oxide Varistors
PVR - ZINC OXIDE VARISTORS Introduction Zinc Oxide Varistor is a non-linear resistance device, whose voltage and current relationship vary according to the Law of Powers. When high transients or surges
Metal Oxide Varistors. 10D Series. Circuit Protection System ELECTRONICS
ELECTRONICS Metal Oxide Varistors 10D Series Features Wide operating voltage (V 1mA ) range from 18V to 1800V. Fast responding to transient over-voltage. Large absorbing transient energy capability. Low
G N R 2 0 D K * * *
VARISTORS Catalog number system G N R 2 0 D 2 0 1 K * * * Product Series Element Size Type Nominal at 1mA DC Tolerance Suffixes GNR: General Nonlinear Resistor 05 :ψ5mm 07 :ψ7mm 10 :ψ10mm 14 :ψ14mm 20
TABLE of contents. Metal Oxide Varistor (MOV) Varistors-5D Series Varistors-7D Series Varistors-10D Series... 5
TABLE of contents Subject Page Metal Oxide Varistor (MOV)..................................................... 1 Varistors-5D Series............................................................ 3 Varistors-7D
JNR ZINC OXIDE VARISTORS FEATURES APPLICATIONS PARAMENTERS DEFINITION HOW TO ORDER
JNR ZINC OXIDE VARISTORS Zinc oxide varistor is a voltage dependent resistor with symmetrical voltage -current characteristics that is designed to protect all kinds of electronic devices or elements from
METAL OXIDE VARISTOR (MOV)
METAL OXIDE VARISTOR (MOV) How to Order SR 241 K 10 D S 40 X Type code Tolerance Disk Size Code Disk Type Lead Type or Taping Code Lead Cutting Special Request SR: Walsin ( volt) (From 180 to 112) Two
Ancol. Ancol Electronics Co.,Ltd Non-Linear Resistor (mm) Element Diameter Packaging K ±10% Varistor Voltage
FEATURES: Widely voltage range 1 8v-1.8kv Fast response to the rapidly increase Voltage (Mu sec.) Excellent non-linearity voltage Symmetric V-I characteristics Great withstanding surge current (200 0A/c
Metal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Halogen-free series are available 3. Body size: Ф7mm ~ Ф 20mm 4. Wide operating voltage range: 5Vac ~ 680Vac 5. High surge current rating up to 3KA 6. High energy rating up
Metal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Halogen-free series are available 3. Body size: Ф7mm ~ Ф 20mm 4. Wide operating voltage range: 5Vac ~ 680Vac 5. High surge current rating up to 3KA 6. High energy rating up
Metal Oxide Varistor:TVT Type
Features. RoHS compliant 2. 2 leaded or 3 leaded thermally protected metal oxide varistor, Three-leaded version available for indication purposes. 3. Body size : 4, 20, 22, 25, 32 and 34 mm in diameter
E CQC CQC CQC CQC CQC D-Seires. 11 to to to
Description CNR D/V/P/H/N series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
Metal Oxide Varistor:TVR Series
Features. Body size: Ф5 ~ Ф20mm 2. Wide operating voltage range:vac ~ 00Vac 3. Operating temperature range:-40 ~ +85 C 4. Agency recognition: UL 449 3 rd /UL 44/cUL/VDE /CSA/CQC 5. TVR48~42 and TVR208~202
NFC. (Varistor Type NFC)
NFC (Varistor Type NFC) Type NFC Varistors are made of semiconductor ceramic materials composed mainly of zinc oxide. They have nonlinear resistance that changes as a function of applied voltage. It has
Metal Oxide Varistor:TVM-B Series
Features 1. RoHS compliant 2. High surge suppress capability 3. EIA size 0402 ~ 2220 4. Operating voltage: 5.5 ~ 85 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
RELIABILITY TEST P10 PRODUCT SERIES P11 ~ P16 P17 ~ P22 P23 P24 P25 P26 V-I CURVE P27 ~ P31 SURGE LIFE TIME RATINGS P32 ~ P36 OUTLINE DIMENSION
Page 1 INDEX P1 VARISTOR OVERVIEW P2 INFORMATION REQUEST FORM P3 FEATURES P4 VARISTOR V-I CHARACTERISTICS P5 HOW TO SELECT A VARISTOR P6 NOTICE FOR APPLICATION P7 ~ P8 TERMINOLOGY & GENERAL P9 CHARACTERISTICS
Metal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. ide continuous voltage range: 30Vac ~ 465Vac 4. Operating temperature range: -40 C ~ +25 C Storage temperature range: -40 C ~ +50 C
VE09 M K. AC Operating Voltage (EIA coding) VE. Nominal Voltage at 1 ma dc (EIA coding) VF
Ordering Code HOW TO ORDER VE09 M 0 0251 K Type VE 07 VE 09 VE 13 VE 17 VE 24 VF 05 VF 07 VF 10 VF 14 VF 20 VN 32 VB 32 Series M: Varistors for general applications P: Varistors for heavy duty applications
ENCAPSULATED MOV SERIES
INTRODUCTION The Encapsulated MOV Series is ideal for SMT processing and Pick and Place assembly. Its low profile package offers space savings compared to leaded devices. These encapsulated components
ENCAPSULATED MOV SERIES
INTRODUCTION The Encapsulated MOV Series is ideal for SMT processing and Pick and Place assembly. Its low profile package offers space savings compared to leaded devices. These encapsulated components
ZINC OXIDE VARISTOR. Fenghua (HK) Electronics Ltd.
FENGHUA Fenghua (HK) Electronics Ltd. Unit 207, Fu Hang Industrial Building, No.1, Hok Yuen Street East, Hung Hom, Hong Kong Tel: 852-2408-7636 Fax: 852-2408-8859 Email: info@fenghua.com URL: FEATURES
SINOCHIP(NANJING) ELECTRONIC CO.,LTD Catalog. Ⅳ Varistor Type MYL5 28
2011-09-01 ROHS Catalog Ⅰ Varistor Type MYG 3 Ⅱ Varistor Type MYL1) 18 Ⅲ Varistor Type MYL3 25 Ⅳ Varistor Type MYL5 28 Ⅴ Varistor Type SPD 33 1 2 ⅠVaristor Type MYG Type MYG Varistors are made of semiconductor
VZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465.
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
SPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
Model Number Structure
Solid State Relays Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
Features. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A
AUML Varistor Series RoHS Description The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
Spezifikation für Freigabe / specification for release
Artikelnummer / part number : 820 553 811 Datum / Date : 2006-06-28 ROHS Compliant A Elektrische Eigenschaften / electrical properties : TECHNICAL DATA Part Number Breakdown Working Clamping Current Peak
XKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoHS and REH DIMENSION L: 16mm min SIZE D MAX H MAX d+/-0.05 E
P-Series 11 to to to to to to to 1100 >1000 <25
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
881WP. Type List. Ordering Information 881 WP1-1A C - - C Basic series designation 4. C -- Contact material AgNi
Type List Terminal style WP (High power type, terminals)-.0mm pitch Contact form A (SPNO) Features Low Profile mm w/ fasten terminals. High Rating 7A 277VAC. High temperature withstand up to 2. UL/CUL
Metal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. Wide continuous voltage range: 30Vac ~ 465 Vac 4. Operating temperature range: -40 C ~ +25 C 5. Storage temperature range: -40 C ~
Spezifikation für Freigabe / specification for release
Datum / Date : 2010-09-15 ROHS Compliant A Elektrische Eigenschaften / electrical properties : TECHNICAL DATA Part Number Breakdown Working Clamping Current Peak Current Tolerance Voltage Voltage Voltage
Varistor Products Radial Lead Varistors > ZA Series
Description The of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include
Metal Oxide Varistor:TVA Series
Features 1. RoHS compliant 2. Body size: Ф25mm ~ Ф 60mm 3. Wide operating voltage range 4. Excellent clamping ratio 5. Low leakage current 6. Large withstanding surge current capability 7. Bidirectional
AQHV Series 200W Discrete Unidirectional TVS Diode
AQHV Series W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The AQHV series is designed to provide an option for very fast acting, high performance over-voltage protection devices. Ideally
Transient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Features. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
Leaded Metal Oxide Varistors
FEATURES GENERAL UROSE TRANSIENT VOLTAGE ROTECTION MEETS UL1449 REV. 3 (File # E357747) FOR SURGE ROTECTIVE DEVICES CURRENT ITHSTANDING (1x U TO 6,500A) TEMERATURE RANGE -40 C ~ +85 C VARISTOR VOLTAGE
AUML Varistor Series. Surface Mount Varistors
The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from
Metal Oxide Varistor Thermally Protected Type. TPV Series FEATURE PART NUMBERING SYSTEM LEAD CONFIGURATION SURGE CURRENT STANDARD WAVEFORM
FEATURE Operating Temperature: -55 C ~ +85 C Varistor : 200V ~ 1200V Two or Three terminal thermally protected Metal Oxide Varistor. High peak Surge current rating up to 10KA Standard lead form and spacing
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
SM24CANB Series 500W TVS Diode Array
SM4CANB Series 5W TVS Diode Array RoHS Pb GREEN Description The SM4CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD,
Introduction fo FPV Series Multilayer Chip Varistor
Introduction fo FPV Series Multilayer Chip Multilayer Chip s (MLV) are Transient Voltage Suppressors (TVS) which manufactured from semiconducting ceramics by the highly advanced multilayer formation technologies,
VAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Scheda prodotto Relè Series E
Relè Miniatura All-or-Nothing relays ideally suited for any electronic appliances demanding very compact design and low power consumption. Design includes a protective dust cover and a completete range
TVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
Electrical Specifications 5mm. Ic (A) (V)
Features: AC operating voltage from 11V to 1000V DC operating voltage from 14V to 1465V Peak current up to 6500 amps Energy handling up to 625J UL1449 certified file no. E476752 Operating temperature range
Model Number Structure
Solid State Relays CSM DS_E_2_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible
55 Series - Miniature General Purpose Relays 5-10 A
Series - Miniature General Purpose Relays -0 A - Plug-in or P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on and CO relays types - Sockets and accessories:
Glass Encapsulated SMD Varistor MLV
(VJ12, 2, 13, 14, 15, 32) Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX s Professional Multilayer Varistors include 3 series of glass coated products as listed
xxx.1xx xxx.4xx0. AgNi contacts, specifically intended for resistive and slightly inductive loads as well as for motor loads
22 Series - Modular contactors 25-40 - 63 22 SERIES Features 22.32.0.xxx.1xx0 22.32.0.xxx.4xx0 25 modular contactor - 2 pole 17.5 mm wide NO contact gap 3 mm, double break Continuous duty for the coil
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
AQxxC Series 450W Discrete Bidirectional TVS Diode
AQxxC Series 5W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
Ordering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays
Low-profile Relay with Various Models Low profile:.7 mm in height Clearance and creepage distance Between coil and contacts: 8 mm/8 mm Between contacts of the same polarity: 3 mm/4 mm Models with AC coil
Sealed type washable 1C H-1C-C 812H-1C-V 812H-1C-S (SPDT) F 812H-1C-C F 812H-1C-V F 812H-1C-S F
8H Type List 8H Terminal style Contact form Features Miniature PCB Power Relays A 2VAC. High CTI 2 material or product comply with IEC 33-1 are available. UL Insulation Class F. VDE, UL/CUL, TUV, CSA/CUS
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes............................................................ 1 General Information...........................................................................
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
varistor plus catalog
varistor plus catalog Single Layer Varistor Technology Surface Mount & Leaded Products SEI electronics inc. P.O.Box 58789 Raleigh,NC 27658-8789 Tel. 1-888-sei-sei-sei Fax. 919-850-9504 www.seielect.com
Surface Mount Multilayer Varistors
ESD Protection (ES) Series Fast Response < 0.5 ns Low Working 5 V Low Capacitance Low Leakage Current < 1 μa Low Application Fields: Cell Phones Digital Cameras PDAs MP3 Notebooks Working (Max) (Max) Leakage
46 and 56 Series - Relays for railway applications 8-12 A. Features 46.52T 56.32T 56.34T
46 and 56 Series - Relays for railway applications 8-12 A Features 46.52T 56.32T 56.34T Plug-in power relays: 8 A, 2 pole 12 A, 2 and 4 pole DC coils with extended range Complies with UNI CEI 11170-3 (protection
MULTILAYER CHIP VARISTORS
Feature Varistor Voltage from5v to 100V Fast response time Low leakage current High surge current ability Bidirectional clamping, high energy Wide Operating temperature range from -55-125 Suitable for
FUJI Ceramic Surge Absorbers
Quality is our message FUJI Ceramic Surge Absorbers ENF series 0 to 680V (Varistor voltage) Features Flame-resistant Suppress combustion and smoking after a malfunction caused by larger surge than the
Features. Type List. Ordering Information S - 1A - - C - Contact Rating
Features Heavy duty A VAC, A VAC power type. AC & DC coils are both available. PCB terminals and quick terminal types. Optional for special large contact gap 3.0mm version. SPNO-ST & DPNO-ST contact configuration.
Miniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
NEW The new PROmax power supplies offer a wide range of robust solutions for demanding application requirements.
Datasheet Single- and three-phase switched-mode power supply units NEW The new power supplies offer a wide range of robust solutions for demanding application requirements. C SEMI F47 US Designed for high
TSV. Suntan ZINC OXIDE VARISTOR. Operating Temperature Range: -40 ~+85. L:16mm min
Operating Temperature Range: -40 ~+85 DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c max D05 8 11 0.5 5±0.8 2.5 D07 10 12.5 0.5 5±0.8 2.5 D10 13.5 16 0.7 7.5±0.8 2.5 D14 17.5 20 0.7 7.5±0.8 2.5 D20
ORDER INFORMATION L-KLS6-MVR G
istors Varistor s L-KLS6-MVR3220-431G 3220 Varistor s,430v,39pf 1 Electrical Characteristics 1.1 Technical Data Symbol Value Unit Maximum allowable continuous AC voltage*1 V RMS 275.0 V Maximum allowable
MVR G. Size: Unit:mm. Type Length(L) Width(W) High(H) Termination(L1) ± ± (max) 0.40±
1 Electrical Characteristics 1.1 Technical Data Symbol Value Unit Maximum allowable continuous AC voltage*1 V RMS 50.0 V Maximum allowable continuous DC voltage V DC 65.0 V Varistor voltage Measured*2
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes... 1 General Information... 2 P4KE Series 400 Watt... 8 SA Series 500 Watt... 12 P6KE Series 600 Watt... 18 1.5KE
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
V35, V40, V50, V60, V75, V95, V130, V140, V150, V175, V230, V250, V275, V300, V385, V420, V460, V510 CSA Recognized File No.
Description Disc Varistors with Radial Leads are standard metal oxide varistors designed mainly for electronic applications. They offer excellent surge protection for use in PCB s, computers, power supplies,
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
ELEC-E8421 Components of Power Electronics. Protection of Power Semiconductor Devices
ELEC-E8421 Components of Power Electronics Protection of Power Semiconductor Devices Protection of power semiconductor devices Overvoltage protection du/dt protection di/dt protection Overcurrent protection
EMC, FILTERS & SUPPRESSION
EMC, FILTERS SUPPRESSION A comprehensive range of voltage dependent, metal oxide semiconductor devices (varistors) designed to protect equipment against transient voltage spikes. Connected directly across
AMOTECH. AMOTECH Co., Ltd. Applications SMPS UPS AC Power Meter Overvoltage Protection Module AC Power Taps Surge Protection of Industrial Area
AMOTECH Co., Ltd. Document Datasheet Type Disk Varistor Application Overvoltage Protection Part No. S series Revision 0 DATASHEET Applications SMPS UPS AC Power Meter Overvoltage Protection Module AC Power
Series AM1P-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Series AM1P-Z Models Single output Model Input Voltage (V) RoHS compliant Operating temperature - o C to + 85 o C 8 Pin DIP Package Input /
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
High-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
UL Recognised Wirewound Resistors
UL1412 recognised fusible resistor * Failsafe mains fusing at 12 / 24Vrms Inrush and surge withstanding UL94-V flameproof coating SMD leadform option available RoHS compliant * UL file number E23449. Electrical
GTCX35-XXXM-R05 Series
Littelfuse Circuit Protection 5mm 3Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
GAS DISCHARGE TUBES (GDTS)
GAS DISCHARGE TUBES (GDTS) Littelfuse's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data
SM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
Selector guide. PSC Square body fuses Size 3X VAC End Contact Terminals. Features and Benefits
Selector guide PSC Square body fuses Size 3X 500-700VAC End Contact Terminals December 2013 Issue 2 The IXYS UK range of 700V/690V protistor fuse links provides maximum flexibility in equipment design
2 pole 10 A PCB mount A1 A
Series - Miniature general purpose relays - 0 A Features Printed circuit mount, general purpose, & Pole relays. - Pole 0 A. - Pole 0 A. - Pole A AC coils & DC coils Cadmium Free contacts (preferred version)
MOV Transient Voltage Suppressors
MOV Transient Voltage Suppressors Description CKE, features two radial leaded MOV product lines: Standard Series High Energy Series CKE, also features three High Energy Special Package MOV products: PA
Model Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
G3PE-Single-phase. Solid State Relays for Heaters
Solid State Relays for Heaters Single-phase Compact, Slim-profile SSRs with Heat Sinks. Models with No Zero Cross for a Wide Range of Applications. RoHS compliant. Models also available with no zero cross
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)
This data sheet contains the MIL-PRF-39006 ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please
Spezifikation für Freigabe / specification for release
Datum / Date : 2007-01-24 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SISE W L T a 402 0.5 1.0 0.6 0.25 603 0.8 1.6 0.9 0.3 805 1.25 2.0 1.2 0.3 1206 1.6 3.2 1.5 0.5 1210 2.5 3.2 1.5 0.5
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
Metal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Boy size Ф7~ Ф 20mm 3. ie operating voltage range:5vac ~ 680Vac 4. High surge current rating up to 3K 5. High energy rating up to 720 Joule 6. Raial lea resin coate 7. Excellent
Series AM2F-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input FEATURES: RoHS compliant Operating temperature -25 o C to + 85 o C 12 Pin SIP Package Input / Isolation 1, 3 or 5VDC
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT