GHIBLI. Plastic Welding > Hand tools > GHIBLI. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
|
|
|
- Reynold Richards
- 5 years ago
- Views:
Transcription
1 GHIBLI Universal tool for welding and shrinking. Two-step air flow switching and stepless temperature. - Universal tool for welding and shrinking - Welding results independent of voltage fluctuations and ambient temperature - Two-step selectable air flow - Extensive range of accessories SPECIFICATIONS GHIBLI 100 V Voltage V~ 100 Power consumption W 1500 Frequency Hz 50 / 60 Temperature C Air flow (20 C) l/min Level 2: 300, Level 3: 350 Pressure static Pa Level 2: 1500 (15 mbar), Level 3: 2100 (21 mbar) Noise emission level LpA db 65 Size (L x W x H) mm 195 x 85 x 160, handle Ø 57 Weight kg 1.25 (with 3 m cord) Marking of conformity Approval mark Certification scheme CCA Protection class II GHIBLI 120 V Voltage V~ 120 Power consumption W 1500 sales@leister.com Page 1/5
2 Frequency Hz 50 / 60 Temperature C Air flow (20 C) l/min Level 2: 300, Level 3: 350 Pressure static Pa Level 2: 1500 (15 mbar), Level 3: 2100 (21 mbar) Noise emission level LpA db 65 Size (L x W x H) mm 195 x 85 x 160, handle Ø 57 Weight kg 1.25 (with 3 m cord) Marking of conformity Approval mark Certification scheme CCA Protection class II GHIBLI 230 V Voltage V~ 230 Power consumption W 2000 Frequency Hz 50 / 60 Temperature C Air flow (20 C) l/min Level 2: 300, Level 3: 350 Pressure static Pa Level 2: 1500 (15 mbar), Level 3: 2100 (21 mbar) Noise emission level LpA db 65 Size (L x W x H) mm 195 x 85 x 160, handle Ø 57 Weight kg 1.25 (with 3 m cord) Marking of conformity Approval mark Certification scheme CCA Protection class II sales@leister.com Page 2/5
3 ACCESSORIES Tubular nozzle Ø 5 mm push-fit on GHIBLI Tubular nozzle Ø 5 mm, push-fit Wide slot nozzle 20mm push-fit on GHIBLI Wide slot nozzle 20 mm, push-fit Spoon reflector 25 x 30 mm push-fit on GHIBLI Spoon reflector 25 x 30 mm, push-fit Folding reflector 70 x 12 mm push-fit on GHIBLI Folding reflector 70 x 12 mm, push-fit Folding reflector 84 x 14 mm push-fit on GHIBLI Folding reflector 84 x 14 mm, push-fit Soldering reflector 17 x 34mm push-fit on GHIBLI Soldering reflector 17 x 34 mm, push-fit Sieve reflector 35 x 20mm push-fit on GHIBLI and LHS Sieve reflector 35 x 20 mm, push-fit sales@leister.com Page 3/5
4 Sieve reflector 50 x 35mm push-fit on GHIBLI and LHS Sieve reflector 50 x 35 mm, push-fit Pressure roller 28 mm (PTFE), with ball bearings Pressure roller 28 mm (PTFE)with ball bearings Pressure roller 28 mm (silicon), with ball bearings Pressure roller 28 mm (silicon), with ball bearings One-arm pressure roller 40 mm, with ball bearings (silicon) One-arm pressure roller 40 mm, with ball bearings (silicon) Customs seal roller, with ball bearings Customs seal roller, with ball bearings Pressure roller with ball bearings (brass), with ball bearings Pressure roller with ball bearings (brass), with ball bearings Tacking nozzle push-fit on tubular nozzle ø 5 mm Tacking nozzle, push-fit on tubular nozzle Ø 5mm Speed welding nozzle 4.5 x 12mm for fillet seams Speed welding nozzle 4.5 x 12mm for fillet seams, push-fit on tubular nozzle ø 5mm sales@leister.com Page 4/5
5 Speed welding nozzle for tape 8 mm push-fit on tubular nozzle Ø 5mm Speed welding nozzle for tape 8 mm, push-fit on tubular nozzle Ø 5mm Speed welding nozzle with small air-slide, push-fit on Tubular nozzle ø 5mm Speed welding nozzle 3 mm, small air-slide, push-fit on tubular nozzle Ø 5 mm Speed welding nozzle 4 mm, small air-slide, push-fit on tubular nozzle Ø 5mm Speed welding nozzle 5 mm, small air-slide, push-fit on Tubular nozzle Ø 5 mm Speed welding nozzle 3, 4, 5 mm push-fit on tubular nozzle Ø 5 mm Speed welding nozzle 3 mm, push-fit on tubular nozzle Ø 5 mm Speed welding nozzle 4 mm push-fit, on tubular nozzle Ø 5 mm Speed welding nozzle 5 mm, push-fit on tubular nozzle Ø 5 mm Sieve reflector 12 x 10 mm push-fit on tubular nozzle Ø 5mm Sieve reflector 12 x 10 mm, push-fit on tubular nozzle Ø 5mm Speed welding nozzle 5.7, 7 mm push-fit on tubular nozzle Ø 5 mm Speed welding nozzle 5.7 mm, push-fit on tubular nozzle Ø 5 mm Speed welding nozzle 7 mm, push-fit on tubular nozzle Ø 5 mm sales@leister.com Page 5/5
6 Powered by TCPDF ( Leister GHIBLI: Air Heater Tel: (JHB) (CT)
GHIBLI. Plastic Welding > Hand tools > GHIBLI. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
GHIBLI Universal tool for welding and shrinking. Two-step air flow switching and stepless temperature. - Universal tool for welding and shrinking - Welding results independent of voltage fluctuations and
DIODE S. Plastic Welding > Hand tools > DIODE S. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
DIODE S Handy and powerful welding tool with steplessly adjustable welding temperature and external air supply. - Electronic temperature control - Overheating protection for heating elements - Adaptor
TRIAC PID. Plastic Welding > Hand tools > TRIAC PID. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
TRIAC PID The tried and tested hand tool for the specialist. With stepless temperature regulation and digital display. - Reproducible results thanks to digital display of set and actual temperature - Welding
TRIAC S. Plastic Welding > Hand tools > TRIAC S. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
TRIAC S The economical hand tool. Deployed worldwide and very reliable, compact and robust. - Adaptor tube with heat protection - Electronic heating element protection - Motor shut-off at minimal carbon
Flooring UNIFLOOR E/S 88 GROOVER 89. Flooring
86 Flooring UNIFLOOR E/S 88 GROOVER 89 Flooring www.leister.com General Catalog Plastic Welding 2010/11 87 Perfectly stowed away in the provided plastic case. Immaculate weld seams with the UNIFLOOR E.
Billboards / Tarpaulins. UNIPLAN E / S 48 UNIPLAN WEDGE 50 UNIMAT V OVERLAP 51 UNIMAT V TAPE 52 TAPEMAT 53 TAPEMAT «Spriegel» 54
46 Billboards / Tarpaulins UNIPLAN E / S 48 UNIPLAN WEDGE 50 UNIMAT V OVERLAP 51 UNIMAT V TAPE 52 TAPEMAT 53 TAPEMAT «Spriegel» 54 Billboards / Tarpaulins www.leister.com General Catalog Plastic Welding
Hot-Air Hand Tools. Plastic Welding General Catalog
8 Hot-Air Hand Tools Product overview 10 / 11 TRIAC ST / TRIAC S 12 / 13 TRIAC AT 14 Accessories TRIAC ST / TRIAC S / TRIAC AT 15 / 16 / 17 ELECTRON ST 18 / 19 Accessories ELECTRON ST 19 / 20 GHIBLI 20
PLASTIC WELDING. Plastic Welding General Catalog Version 2.0. The only choice for professionals.
PLASTIC WELDING Plastic Welding General Catalog Version 2.0 The only choice for professionals. Leister Technologies AG, Corporate Center, Kaegiswil, Switzerland Leister Technologies AG, production building,
HEAT ON. Plastic welding machines. BAK Thermoplastic Welding Technology AG. Industriestrasse Kerns / Switzerland
HEAT ON Plastic welding machines BAK Thermoplastic elding Technology AG HEAT ON Headquarter Asia Office BAK Thermoplastic elding Technology AG BAK Asia Co.,Ltd. 8/1 Ratchaphruek Bang Yi Ruea, Thon Buri
Please read the operating instructions carefully before use and keep for future reference.
GB OPERATING INSTRUCTION LEISTER Electric Hot Air Tool Please read the operating instructions carefully before use and keep for future reference. USAGE The LEISTER hot air tool Mini sensor is suitable
Roof - welding systems
Roof - welding systems Hand welding devices Rion Rion 120 volt Order no. 6600077 pluggable Rion 230 volt Order no. 6600075 pluggable Transport box Order no. 5201000 Technical data Rion / Rion Digital:
PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of
Read the operating instructions carefully before use and keep for future reference.
GB OPERATING INSTRUCTIONS Hot wedge Automatic Welding Tool Read the operating instructions carefully before use and keep for future reference. APPLICATION Hot Wedge Automatic Welding Tool Overlap and tape
Operating Instructions (Translation of the original operating instructions) Leister TAPEMAT Hot-Air welding machine
GB TAPEMAT Leister Process Technologies Galileo-Strasse 10 CH-6056 Kaegiswil/Switzerland Tel. +41 41 662 74 74 Fax +41 41 662 74 16 www.leister.com sales@leister.com Operating Instructions (Translation
Roof - welding systems
Roof - welding systems Hand welding devices Rion Rion 120 volt Order no. 6600077 pluggable Rion 230 volt Order no. 6600075 pluggable Transport box Order no. 5201000 Technical data Rion / Rion Digital:
2016 /17. We know how. General Catalog US-Edition Plastic Welding. Professional equipment for workshops and construction sites. Version 6.
2016 /17 General Catalog US-Edition Plastic Welding Professional equipment for workshops and construction sites Version 6.1 We know how. Leister Technologies AG, Corporate Center, Kaegiswil, Switzerland
2017 /18. We know how. General Catalog US-Edition Plastic Welding. Professional equipment for workshops and construction sites.
Swiss made 2017 /18 General Catalog US-Edition Plastic Welding Professional equipment for workshops and construction sites www.leister.com We know how. Leister Technologies AG, Corporate Center, Kaegiswil,
TW Electric hot-air automatic welding machine. Four wheel drive and belt system assures wrinkle free welding
TW 5000 Electric hot-air automatic welding machine Four wheel drive and belt system assures wrinkle free welding Adjustable front wheels for easy operation at different angles Powerful motor and efficient
Hot-Air Hand Tools. TRIAC ST TRIAC AT HOT JET S GHIBLI AW General accessories
Technical Textiles & Industrial Fabrics Product overview hot-air welders SEAMTEK 900 AT VARIANT T1 VARIANT T1 Overlap VARIANT T1 TAPE UNIPLAN E / UNIPLAN S TAPEMAT / TAPEMAT SPRIEGEL 46 / 47 48-50 51 52
Hot-Air Hand Tools. Hot-Air Hand Tools 10 / / / / / /
Hot-Air Hand Tools TRIAC ST for use in the roughest of environments. Product overview TRIAC ST TRIAC AT ELECTRON ST HOT JET S GHIBLI AW GHIBLI HOTWIND PREMIUM / SYSTEM FORTE S AIRSTREAM ST ROBUST WELDING
Hot-Air Hand Tools. Hot-Air Hand Tools
Hot-Air Hand Tools TRIAC ST for use in the roughest of environments. Product overview TRIAC ST TRIAC AT ELECTRON ST HOT JET S GHIBLI AW GHIBLI HOTWIND PREMIUM / SYSTEM FORTE S AIRSTREAM ST ROBUST WELDING
General Catalog Plastic Welding 2013 /14. The only choice for professionals. We know how. Version 3.0
General Catalog Plastic Welding 201 /1 The only choice for professionals Version.0 We know how. TRIAC ST Design meets experience The new TRIAC ST from Leister is primarily used for welding and plastic
OPERATING INSTRUCTIONS. LEISTER Varimat V Hot Air Automatic Welding Machine
GB OPERATING INSTRUCTIONS Hot Air Automatic Welding Machine Please read operating instructions carefully before use and keep for further reference. APPLICATION Automatic Overlap Welding Machine For overlap
PLASTIC WELDING. Plastic fabrication with Leister. Versatile and economical.
PLASTIC WELDING Plastic fabrication with Leister. Versatile and economical. Leister delivers performances. Wherever you need to apply heat, Leister provides the ideal solution. We have been the worldwide
Hot Air Devices for welding, heating, shaping of thermoplastic materials. Floor welding machine Nozzles Accessories
S C H W E I S S T E C H N I K O n e c o m p a n y 3 p r o d u c t i o n l i n e s Hot Air Devices for welding, heating, shaping of thermoplastic materials Floor welding machine Nozzles Accessories Hot
PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and roust. TRIAC AT features Suitale for the work site Closed loop controlled temperature Open loop controlled air volume Intelligent «e-drive» operating unit
Blowers. SILENCE 54 ASO 55 ROBUST 56 AIRPACK 57 MONO 58 Frequency Converter 59 Accessories General Catalog Process Heat
52 SILENCE 54 ASO 55 ROBUST 56 AIRPACK 57 MONO 58 Frequency Converter 59 Accessories 6 www.leister.com General Catalog Process Heat 53 SILENCE: The quieter option. No blower no air! In industrial processes
AAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
Continuous level measuring system NB 4000 Selection list
Table of contents Page Overview P2 Specification / application P3 P4 Options / Accessories P6 Dimensions / materials P7 Spare parts P9 Electrical installation P11 Subject to change. All dimensions in mm
AATVP. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES:
AATVP HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES: Accessories Fan made of Fe36 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved
Continuous level measuring system. LevelMax. Selection Guide. Overview 2
Table of contents Page Overview 2 ------------------------------------------------------------------- Specification / application 3 ------------------------------------------------------------------- 4
Flooring / Interior Decoration
88 Flooring / UNIFLOOR E / UNIFLOOR S 90 GROOVER 91 Flooring welding procedures 92 Overview of hot air tools for Flooring / 93 Flooring / www.leister.com 89 UNIFLOOR E / S: A jack of all trades. With the
LE Proven a thousand times over: LE The LE air heater family. LE 5000 LE S
LE 3000 Proven a thousand times over: LE 3300 The LE air heater family. LE 5000 LE 10000 S Leister delivers performances. Wherever you need to apply heat, Leister provides the ideal solution. We have been
Plastic Fabrication. Extrusion and hot-air hand welders. We know how. 2017/2018. The right choice for the specialist.
Plastic Fabrication 2017/2018 Swiss made Extrusion and hot-air hand welders The right choice for the specialist www.leister.com We know how. 2 Dear Leister customers The selection of machines and equipment
Soldering/Desoldering. Convection Rework. Fume Extraction. Fluid Dispensing
Soldering/Desoldering Convection Rework Fume Extraction Fluid Dispensing www.beasuperproducer.com BVX-100 Benchtop Single User Arm/Plenum System Portable, single user fume extraction system Low noise unit
HEAT ON. Plastic welding extruder. BAK Thermoplastic Welding Technology AG. Industriestrasse Kerns / Switzerland
HEAT ON Plastic welding extruder BAK Thermoplastic Welding Technology AG E-Mail info@bak-ag.com Industriestrasse 6 6064 Kerns / Switzerland Telefon +41 (0)41 661 22 50 Fax +41 (0)41 661 22 51 HEAT ON With
STEP ECON. HÜDIG generators are available from output ranges 30 up to 1000 kva (higher outputs on request).
STEP ECON HÜDIG generators are available from output ranges 30 up to 1000 kva (higher outputs on request). These ECON generators are designed for applications at rough construction sites and are characterized
3.4 Wide Angle Nozzles
Product description Wide angle nozzles are ventilation end elements that are used for the distribution of inlet air at large distances. The flow direction of the inlet air is not only dependent on the
CEB 71204/a of 13 december 2005 SLSHR. 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw
CEB 71204/a of 13 december 2005 SLSHR 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw C.E.B. SLSHR RANGE TECHNICAL CATALOGUE 05/12/13 CONTENTS CONTENTS 2 APPLICATIONS
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Easy installation Local indication by means of direct reading Low pressure drop Scales directly in l/h, m 3 /h, kg/h, l/min,
Approved Repair Method
Prepared by : RJK Approved by : UH Original issue date : 18-11-2008 Document number : ARM-ZACE-002 Revision : 5 Revision date : 31-07-2015 Title : Herculight Patch Repair 1. Planning information A. Effectivity:
Foaming of Lubricating Oils (manual)
Foaming of Lubricating Oils (manual) ASTM D 892, ASTM D 6082 sequence IV, ISO 6247, DIN 51566, IP 146, JIS K2518, BS 5092 (obs.) Product group(s): User group(s): Scope: Lubricant Testing Automotive, Engine
Flow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
One-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
GECKO FILLET WELDING CARRIAGE
GECKO FILLET WELDING CARRIAGE Gecko is a portable mini fillet welder designed to produce consistent high-quality welds. It features 4-wheel drive system with magnetic traction and a control loop feedback
Power cord - Cleaning agent tank. Feed temperature 60 C. Power cord - Outside temperature /3-18 bar/mpa. Heat output - Fuel tank -
HD6/16 4MX 467 x 407 x 1010 mm Power cord - 3,4 kw Operating pressure 30-160/3-16 bar/mpa 230-600 l/h 50 kg Max. pressure 190/19 bar/mpa - 1/230/50 Ph/V/Hz Feed temperature 60 C HDS9/18 4M 1330 x 750 x
HIGH PRESSURE COMPRESSORS FOR NATURAL GAS REFUELLING OF VEHICLES FOR PRIVATE USE. CATALOG 2018 CNG FILLING STATIONS
HIGH PRESSURE COMPRESSORS FOR NATURAL GAS REFUELLING OF VEHICLES FOR PRIVATE USE. CATALOG 2018 CNG FILLING STATIONS CNG 3 EVO 50 l/min 3 m 3 /h TECHNICAL DATA REFUELLING TIME 80 l Cylinder (kg 11.5) 0/200
Setting New Standards. Widest Sealing Range Maximum Strain Relief Superior Protection Rating. 94 CONTA-CLIP, Inc. (732)
Setting New Standards Widest Sealing Range Maximum Strain Relief Superior Protection Rating 94 CONTA-CLIP, Inc. (732) 564-0705 The principle benefits gland body Materials: Nickel plated brass Stainless
SVF-2 0 Miniature Dry Floating Scroll Vacuum Pump
SVF-2 0 Miniature Dry Floating Scroll Vacuum Pump Patent protected Floating Scroll Technology 100% Oil Free; Maintenance Free With Pumping Speed at 2 L/min With Ultimate Pressure at 10 Pa Ideal compact
InvoTech. YH series Scroll Compressors. Special Design For A /C and Chiller
InvoTech YH series Scroll Compressors Special Design For A /C and Chiller It is the outstanding engineering capability that builds the incomparable reliability Scroll Compressors With Dual-Compliance For
Flow switches Series AD/VH
Flow switches Series AD/VH Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling,
COMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS The Caleffi Solar product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
DFB - Conical Ceiling Diffuser. Halton DFB. Conical Ceiling Diffuser
Halton DFB Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket All sizes
Immersion temperature sensor QAE26.9.
1 790 1790P01 Immersion Temperature Sensors.. Use Acquisition of flow or return temperature in heating, ventilating, and air conditioning plants. Type summary Type Measuring range Cable length Material
Flygt /180/280/290. Parts List
Flygt 3201.091/180/280/290 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification
InvoTech. YH series Scroll Compressors. Special Design For A /C and Chiller
InvoTech YH series Scroll Compressors Special Design For A /C and Chiller It is the outstanding engineering capability that builds the incomparable reliability Scroll Compressors With Dual-Compliance For
Limit switches. 6 Thermoplastic roller lever 1 direction of actuation SEN TRONIC AG. Presentation
Presentation Variable composition Spring-rod lever with thermoplastic end () Spring-rod lever, metal () Variable length thermoplastic roller lever () Round rod lever, thermoplastic, Ø mm L = mm () ZCK
THB - Perforated Ceiling Diffuser. Halton THB. Perforated Ceiling Diffuser
Halton THB Perforated Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation either directly to ductwork or balancing plenum Detachable front panel enables the cleaning of the diffuser
JUMO dtrans p20 DELTA
Data Sheet 403022 Page 1/9 JUMO dtrans p20 DELTA Differential pressure transmitter Brief description The JUMO dtrans p20 DELTA differential pressure transmitter with HART interface combines maximum precision
DKR - Multi-nozzle Ceiling Diffuser. Halton DKR. Multi-nozzle Ceiling Diffuser
Halton DKR Multi-nozzle Ceiling Diffuser Horizontal air supply, vertical air patterns are also possible Supply air pattern can freely be directed in up to four directions or alternatively radially as swirl
energy efficiency Zone valves
05 Zone valves energy efficiency Non detachable zone valves Standard zone valves Normally Open Standard zone valves M-M Standard zone valves Solar zone valves M-M Solar zone valves Detachable zone valves
N, N4. End-Suction Centrifugal Pumps standardized EN 733
, Construction Single-stage end-suction centrifugal pumps, with bearing bracket. ominal duty points and main dimensions in accordance with E 7. Back Pull-Out construction, for simple and quick dismantling
Proximity switches and switch brackets
Proximity switches and switch brackets MGE.0 - Proximity switches and switch brackets 5 7 SH /S (p. -) SH /U (p. -) SH /S, SH /ST (p. -) SH /S-H (p. -5) 9 SH /U (p. -) SH /U-H (p. -7) Proximity switch
Mechatronic pressure measurement. Applications. Special features. Description
Mechatronic pressure measurement Diaphragm pressure gauge with electrical output signal Stainless steel, safety version High overload safety up to 400 bar Models PGT43HP.100 and PGT43HP.160 k Applications
System 6000 Electropneumatic Converters for DC ranges I/P Converter Type 6102 Type 5288
System 6000 Electropneumatic Converters for DC ranges I/P Converter Type 6102 Type 5288 Fig. 1 Type 6102-51 Rack-mounting Unit Fig. 2 Type 6102-52 Rack-mounting Unit Fig. 3 Type 6102-53 Field Unit Fig.
Stainless Steel Products
/1 Stainless Steel Products Group code Product name 016 Push to close 11 T handle heavy duty lock 060 Quarter turn with spring 066 Mini quarter turn with spring 064 Quarter turn with spring 02 Swing handle
Continuous level measuring system NB 3000 Selection list
Table of contents Page Overview 2 ------------------------------------------------------------------------------------------------------------------- Specifications 3 -------------------------------------------------------------------------------------------------------------------
Air Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11
Air Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11 Symbol General The AC-LN 8-14 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers
Connection parts with nominal width DN 6 Valves, coupling valves, protection caps, fittings, adapters and connections for analytic instruments
SF 6 gas excellence Connection parts with nominal width DN 6 Valves, coupling valves, protection caps, fittings, adapters and connections for analytic instruments WIKA data sheet SP 61.12 Applications
Operating pressure (bar) kv factor (m 3 /h) *3)
/ poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar For
One-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
Metal tube variable area flowmeter for gases, liquids and steam
Metal tube variable area flowmeter for gases, liquids and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h, kg/h, t/h,
Hose pumps SP 04. Otto Huber GmbH Heubergstraße 2 D Böttingen. integrated pump. exterior pump. laboratory pump
Hose pumps SP 04 integrated pump exterior pump laboratory pump Otto Huber GmbH Heubergstraße 2 D-78583 Böttingen Phone: Fax: E-Mail: Internet: +49(0)7429/9312-0 +49(0)7429/9312-50 info@otto-huber.de www.otto-huber.de
Main parts and accessories
Schemes : Main parts and accessories Contents : Removing the covering - 1 Horn installation - 3 Rudder installation - 4 Tail Wheel system - 12 Landing gear installation - 6 Stabilizer installation - 5
502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref:
Model/Ref: 270090022000 www.lauridsenindustri.com CHARACTERISTICS The 502+UM1.5 is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons,
PANASONIC Models: MC-9410, MC-9420, MC-9430, MC-9440
Dust Cover and Attachments A1... P-12429... Indicator Plate, 9410 A1... P-12430... Indicator Plate, 9420 A1... P-12431... Indicator Plate, 9430 A1... P-12432... Indicator Plate, 9440 A2... P-12433... Indicator
Max. particle size 50 µm Max. oil content of compressed air
1 Version Poppet valve Control Analog Certificates CE declaration of conformity Ambient temperature min./max. +0 C / +70 C Medium temperature min./max. +0 C / +70 C Medium Compressed air Max. particle
Max. oil content of compressed air
1 Version Control Certificates Ambient temperature min./max. Medium temperature min./max. Medium Poppet valve Analog CE declaration of conformity +32 F / +15 F +32 F / +15 F Compressed air 0012533 Max.
DKS - Multi-nozzle Ceiling Diffuser. Halton DKS. Multi-nozzle Ceiling Diffuser
Halton DKS Multi-nozzle Ceiling Diffuser Horizontal air supply, vertical air patterns also possible Supply air pattern can freely be directed in up to four directions or alternatively radially as swirl
Series
PNEUMATI valves Series 79-8 - 84-85 - 87 Steelspool Valves Solenoid Valves Mechanical Valves Pneumatic Valves oils & Plug-in sockets VM/EN 4 The components illustrated and described in the present calalogue
APPLIED VACUUM TECHNOLOGY. ASK THE EXPERTS!
4,6,8,16,24,30 APPLIED VACUUM TECHNOLOGY. ASK THE EXPERTS! www.welchvacuum.com/crvpro YOUR BENEFITS Highest reliability for stable operation and long product lifespan Reduced risk of chemical attacks and
WINDER. Impellers with higher efficiency and less sound level
WINDER Impellers with higher efficiency and less sound level Winder Solutions The last new generation impeller With the Serrated Novovent Concept (S.N.C.), NOVOVENT, S.A. has developed a new blades generation.
L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
CENTRIFUGAL FAN COIL UNIT VCE
CENTRIFUGAL FAN COIL UNIT VCE 0,51 kw 11,00 kw 0,85 kw 23,75 kw 129 m 3 /h 2003 m 3 /h VCE DESIGN QUALITY COMFORTRELIABILITY 3VERSION12 SIZE DESIGN VCEx0 vertical with cabinet Air intake: bottom vertical
DFA - Conical Ceiling Diffuser. Halton DFA. Conical Ceiling Diffuser
Halton DFA Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket Openable
Soldering-Desoldering Station Scientech 80 Series
Accurate and advanced temperature Control with micro controller technology User-friendly operation Set / Read of temperature Increase and Decrease of keys to set temperature once set the read temperature
SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot
SPOOL VALVES operated / to / tapped body and NAMUR for integrated pilot ATEX /-/ Series - FEATURES The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter
Pressure Sensor - EPT3100
Pressure Sensor - EPT3100 Up to 4000 Bar pressure range High strength, rugged stainless steel design Competitively priced The EPT3100 is a high quality all stainless steel pressure transducer, intended
Technical Datasheet. HM U Series. Turbine Flow Meters. for lubricating liquids
www.kem-kueppers.com info@kem-kueppers.com Technical Datasheet HM U Series Turbine Flow Meters for lubricating liquids Certified according to DIN EN ISO 9001 2 HM U Series Turbine Flow Meters Description
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
Differential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
502 VALVE WITH UM ELECTRIC ACTUATOR
502 VALVE WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 502+UM is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons, etc. It is a full
SIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage 45008, 45311, 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction
Air-Purifying Smoke Absorber
Air-Purifying Smoke Absorber Air-Purifying Smoke Absorber HEPA filter (High Efficiency Particulate Air Filter) Filters out 99.97% of particles greater than 0.3 µm Recommended for quiet laboratory and office
Industrial flue gas probes. Instruction manual
Industrial flue gas probes Instruction manual 2 1 Contents 1 Contents 1 Contents... 3 2 Safety and the environment... 4 2.1. About this document... 4 2.2. Ensure safety... 4 2.3. Protecting the environment...
JCB DIESEL GENERATOR TECHNICAL SPECIFICATIONS
JCB DIESEL GENERATOR TECHNICAL SPECIFICATIONS G115QX G115X ELECTRICAL FREQUENCY VOLTAGE PRIME STAND BY 50Hz 3ph 400/230v 107.7kVA / 86.2kW 118.5kVA / 94.8kW 60Hz 3Ph 380/220v 102.0kVA / 81.6kW 111.9kVA
SITRANS P measuring instruments for pressure
Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)
502 VALVE WITH UM ELECTRIC ACTUATOR
502 VALVE WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 502+UM is a 2 way brass ball valve dedicated to the automatic shut off of non corrosive common fluids: water, air, hydrocarbons, etc. It is a full
Valves, controllers + systems Double regulating and commissioning valves Hydrocontrol F cast iron, PN 16
Valves, controllers + systems Double regulating and commissioning valves Hydrocontrol F cast iron, PN The Oventrop Quality Management System is certified to DIN-EN-ISO 9001 Technical information Application:
-Q- Temperature range C. -L- Operating pressure bar. Vacuum filters ESF Technical data. Function
Vacuum filters Vacuum filters ESF Function -Q- Temperature range 0 +60 C -L- Operating pressure 0.95 +4 bar Accessory for the suction gripper ESG, mounted between suction cup holder and suction cup with