Table of Contents Zitzi Flipper Pro 6:1 6:2 6:3 6:4 6:5 7:1 7:2

Transcription

1 Manual Zitzi Flipper Pro EN TM Zitzi Flipper Pro Gasspring Zitzi Flipper Pro Electric Table of Contents Zitzi Flipper Pro Edition nr :1 Adjusting the height - Gasspring 6:1 Summary & Follow ups 3:1 Adjusting the height - Electric 6:2 Service 3:2 Charging the battery 6:3 Marking 4:1 Tilt function 6:4 Warranty 4:2 Driving bow 6:5 Suitable seating systems 5:1 Parking brake 7:1 Disassembly & Dismantlement 5:2 Mounting a seating system 7:2 Technical data The product is only intended for use as an under frame together with seating systems produced by Anatomic SITT AB. If other uses are desired, please contact Anatomic SITT AB. MANUFACTURER Anatomic SITT AB, Box 6137 SE NORRKÖPING, SWEDEN VISITING ADDRESS Anatomic SITT AB, Stohagsgatan 26 SE NORRKÖPING, SWEDEN SPECIAL MADE PRODUCT The product is customized and the CE-mark is removed

2 2:1 Adjusting the seat height - Gasspring The seat height are adjustable from cm and can easily be adjusted with the handle grip. Keep in mind that you always should have a hand on the seating system when you are adjusting it. Be careful to avoid risk of pinching Adjustable Seat Height Gasspring Release the locked position by pressing the handle grip Adjust the seat height to desired position Let go of the handle grip when you achieved the desired height Zitzi Flipper Pro Fully low PAGE 2 (8) Manual Anatomic SITT AB

3 3:1 Adjustable seat height - Electric The seat height are adjustable from cm and can easily be adjusted with the electric hand control. Adjustable Seat Height Electric Keep in mind that you always should have a hand on the seating system when you are adjusting it. Be careful to avoid risk of pinching Up arrow raises the seat plate Down arrow lowers the seat plate Contact for charging 3:2 Charging the battery Connect the cable of the charger into a regular wall socket (220 V). Then connect the cable of the charger into the side of the hand control. You have to charge the battery for at least 24 hours the first time you use it. It is very important that you never let the battery uncharge completely. If so, it may be damage. ACTUATOR HAND CONTROL! Charge the battery for 24 hours the first time Thereafter, charge it every night Never let the battery uncharge completely HAND CONTROL ACTUATOR Manual Anatomic SITT AB PAGE 3 (8)

4 4:1 Tilt function The angle of the seat plate are adjustable 0-30 o and can be adjusted by loosen the knobs, then push the seat plate down- and forward. To reset the seat angle to its starting position, loose the knobs and pull the seat plate up and backwards by griping the handle. The spring bounce The two springs on each side of the Zitzi Flipper PRO helps you to get the seat plate into the starting position again. Tilt function Quick step Release the lock by loosen the knob on both sides Then adjust the seat angle into the desired position Lock both knobs when you achieved the desired position Supervision Always check that the tilt function is fully locked when you achieved the desired angle. Keep hands and fingers away. Be careful to avoid risk of pinching Locking The knobs must be locked when a change has been made. Otherwise the teeth can be damaged. 4:2 Driving handle & driving bow Mounting of driving handle Mount the driving handle by push it into the frame. Tighten the screws properly after mountning. Mounting of Driving handle Mounting of the large driving bow The large driving bow shall be mounted in between the tube frame and the rear wheels. The bow shall be mounted on the top of the tube. Mounting of Driving bow Use locktite when re-mounting the rear wheels. The distance shall only be used on Flipper Pro size 3. Distance PAGE 4 (8) Manual Anatomic SITT AB

5 5:1 Parking brake To lock the wheels in an certain position, push the back of the pedal. To release the position again, push the opposite side of the pedal. Both direction- and spin function are disabled by activating the locking device. Parking brake Quick step Lock the wheels by pushing the back of the pedal Release the position by pushing the opposite Locked Unlocked 5:2 Mounting a seating system A seating system can easily be mounted on Zitzi Flipper PRO with a mounting plate. The mounting plate is equipped with 4 bolts that makes the seating system stays in place. The knob beneath the mounting plate makes sure that the seating system do not lose its position. Hole pattern Pull direction Pull downwards Knob Manual Anatomic SITT AB PAGE 5 (8)

6 6:1 Care instructions Cleaning the frame Clean the frame regularly with car shampoo or similar. When extreme condition, a degreasing agent can be used. Think of the environment! Please use a biodegradable agent. The battery You must charge the battery for at least 24 hours the first time you use it. Thereafter we recommend you to charge it every night. Be sure you never let the battery uncharge completely, if so the battery may be damaged.! Charge the battery for 24 hours the first time Thereafter, charge it every night Never let the battery uncharge completely 6:2 Summary & Follow ups Control Always check any moving parts for possible wear. Change if necessary. Don t hesitate to contact us if you feel insecure. You reach us at +46 (0) or by info@anatomicsitt.com. 6:3 Marking Every product have a unique serial number that must be used when correspondence about the product take place. SERIAL NUMBER 6:4 Warranty Warranty Frame months warranty manufacturing defect Warranty Paint months warranty manufacturing defect Warrant Wheels months warranty manufacturing defect 6:5 Suitable seating systems The product fits Zitzi Delfi, Zitzi Delfi Pro, Zitzi Sharky and Anatomic SITS. For other combinations, please contact Anatomic SITT AB. PAGE 6 (8) Manual Anatomic SITT AB

7 7:1 Disassembly & Dismantlement Plastic Wheels, knobs, the locking device for the wheels Metal Frame, gas piston, springs, screws and stays. Combustibly Cushion 7:2 Technical data Down below you see which technical data the product obtains. When the user weight increases 40 kg, the frame with electric should be used. Maximum loading weight is 75 kg. Zitzi Flipper Pro Gasspring Electric Wheels 125 mm 125 mm Width 55 cm 70 cm Length 55 cm 55 cm Max seating height 61 cm 61 cm Min seating height 23 cm 23 cm Tilt 0-30 o 0-30 o Max weight kg kg MANUFACTURER Anatomic SITT AB, Box 6137 SE NORRKÖPING, SWEDEN VISITING ADDRESS Anatomic SITT AB, Stohagsgatan 26 SE NORRKÖPING, SWEDEN SPECIAL MADE PRODUCT The product is customized and the CE-mark is removed Manual Anatomic SITT AB PAGE 7 (8)

8 Contact us Don t hesitate to get in touch with us if there should be anything. Down below you will find different ways to go when contacting us. Choose the alternative that fits you the best and we will try to straighten your questionmarks out as good as we can. TM Phone Support Anatomic SITT AB Fax BOX 6137 SE Norrköping Web info@anatomicsitt.com Notes Sticker placement! MANUFACTURER Anatomic SITT AB, Box 6137 SE NORRKÖPING, SWEDEN VISITING ADDRESS Anatomic SITT AB, Stohagsgatan 26 SE NORRKÖPING, SWEDEN SPECIAL MADE PRODUCT The product is customized and the CE-mark is removed